/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 4 -*- * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Oracle Corporation code. * * The Initial Developer of the Original Code is Oracle Corporation. * Portions created by the Initial Developer are Copyright (C) 2005 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Stuart Parmenter * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "prmem.h" #include "gfxAlphaRecovery.h" #include "gfxImageSurface.h" #include "cairo.h" gfxImageSurface::gfxImageSurface() : mSize(0, 0), mOwnsData(PR_FALSE), mFormat(ImageFormatUnknown), mStride(0) { } void gfxImageSurface::InitFromSurface(cairo_surface_t *csurf) { mSize.width = cairo_image_surface_get_width(csurf); mSize.height = cairo_image_surface_get_height(csurf); mData = cairo_image_surface_get_data(csurf); mFormat = (gfxImageFormat) cairo_image_surface_get_format(csurf); mOwnsData = PR_FALSE; mStride = cairo_image_surface_get_stride(csurf); Init(csurf, PR_TRUE); } gfxImageSurface::gfxImageSurface(unsigned char *aData, const gfxIntSize& aSize, long aStride, gfxImageFormat aFormat) { InitWithData(aData, aSize, aStride, aFormat); } void gfxImageSurface::InitWithData(unsigned char *aData, const gfxIntSize& aSize, long aStride, gfxImageFormat aFormat) { mSize = aSize; mOwnsData = PR_FALSE; mData = aData; mFormat = aFormat; mStride = aStride; if (!CheckSurfaceSize(aSize)) return; cairo_surface_t *surface = cairo_image_surface_create_for_data((unsigned char*)mData, (cairo_format_t)mFormat, mSize.width, mSize.height, mStride); // cairo_image_surface_create_for_data can return a 'null' surface // in out of memory conditions. The gfxASurface::Init call checks // the surface it receives to see if there is an error with the // surface and handles it appropriately. That is why there is // no check here. Init(surface); } static void* TryAllocAlignedBytes(size_t aSize) { // Use fallible allocators here #if defined(HAVE_POSIX_MEMALIGN) || defined(HAVE_JEMALLOC_POSIX_MEMALIGN) void* ptr; // Try to align for fast alpha recovery. This should only help // cairo too, can't hurt. return moz_posix_memalign(&ptr, 1 << gfxAlphaRecovery::GoodAlignmentLog2(), aSize) ? nsnull : ptr; #else // Oh well, hope that luck is with us in the allocator return moz_malloc(aSize); #endif } gfxImageSurface::gfxImageSurface(const gfxIntSize& size, gfxImageFormat format) : mSize(size), mOwnsData(PR_FALSE), mData(nsnull), mFormat(format) { mStride = ComputeStride(); if (!CheckSurfaceSize(size)) return; // if we have a zero-sized surface, just leave mData nsnull if (mSize.height * mStride > 0) { // This can fail to allocate memory aligned as we requested, // or it can fail to allocate any memory at all. mData = (unsigned char *) TryAllocAlignedBytes(mSize.height * mStride); if (!mData) return; memset(mData, 0, mSize.height * mStride); } mOwnsData = PR_TRUE; cairo_surface_t *surface = cairo_image_surface_create_for_data((unsigned char*)mData, (cairo_format_t)format, mSize.width, mSize.height, mStride); Init(surface); if (mSurfaceValid) { RecordMemoryUsed(mSize.height * ComputeStride() + sizeof(gfxImageSurface)); } } gfxImageSurface::gfxImageSurface(cairo_surface_t *csurf) { mSize.width = cairo_image_surface_get_width(csurf); mSize.height = cairo_image_surface_get_height(csurf); mData = cairo_image_surface_get_data(csurf); mFormat = (gfxImageFormat) cairo_image_surface_get_format(csurf); mOwnsData = PR_FALSE; mStride = cairo_image_surface_get_stride(csurf); Init(csurf, PR_TRUE); } gfxImageSurface::~gfxImageSurface() { if (mOwnsData) free(mData); } /*static*/ long gfxImageSurface::ComputeStride(const gfxIntSize& aSize, gfxImageFormat aFormat) { long stride; if (aFormat == ImageFormatARGB32) stride = aSize.width * 4; else if (aFormat == ImageFormatRGB24) stride = aSize.width * 4; else if (aFormat == ImageFormatRGB16_565) stride = aSize.width * 2; else if (aFormat == ImageFormatA8) stride = aSize.width; else if (aFormat == ImageFormatA1) { stride = (aSize.width + 7) / 8; } else { NS_WARNING("Unknown format specified to gfxImageSurface!"); stride = aSize.width * 4; } stride = ((stride + 3) / 4) * 4; return stride; } PRBool gfxImageSurface::CopyFrom(gfxImageSurface *other) { if (other->mSize != mSize) { return PR_FALSE; } if (other->mFormat != mFormat && !(other->mFormat == ImageFormatARGB32 && mFormat == ImageFormatRGB24) && !(other->mFormat == ImageFormatRGB24 && mFormat == ImageFormatARGB32)) { return PR_FALSE; } if (other->mStride == mStride) { memcpy (mData, other->mData, mStride * mSize.height); } else { int lineSize = PR_MIN(other->mStride, mStride); for (int i = 0; i < mSize.height; i++) { unsigned char *src = other->mData + other->mStride * i; unsigned char *dst = mData + mStride * i; memcpy (dst, src, lineSize); } } return PR_TRUE; } already_AddRefed gfxImageSurface::GetSubimage(const gfxRect& aRect) { gfxRect r(aRect); r.Round(); unsigned char* subData = Data() + (Stride() * (int)r.Y()) + (int)r.X() * gfxASurface::BytePerPixelFromFormat(Format()); nsRefPtr image = new gfxSubimageSurface(this, subData, gfxIntSize((int)r.Width(), (int)r.Height())); return image.forget().get(); } gfxSubimageSurface::gfxSubimageSurface(gfxImageSurface* aParent, unsigned char* aData, const gfxIntSize& aSize) : gfxImageSurface(aData, aSize, aParent->Stride(), aParent->Format()) , mParent(aParent) { } already_AddRefed gfxImageSurface::GetAsImageSurface() { nsRefPtr surface = this; return surface.forget(); } void gfxImageSurface::MovePixels(const nsIntRect& aSourceRect, const nsIntPoint& aDestTopLeft) { const nsIntRect bounds(0, 0, mSize.width, mSize.height); nsIntPoint offset = aDestTopLeft - aSourceRect.TopLeft(); nsIntRect clippedSource = aSourceRect; clippedSource.IntersectRect(clippedSource, bounds); nsIntRect clippedDest = clippedSource + offset; clippedDest.IntersectRect(clippedDest, bounds); const nsIntRect dest = clippedDest; const nsIntRect source = dest - offset; // NB: this relies on IntersectRect() and operator+/- preserving // x/y for empty rectangles NS_ABORT_IF_FALSE(bounds.Contains(dest) && bounds.Contains(source) && aSourceRect.Contains(source) && nsIntRect(aDestTopLeft, aSourceRect.Size()).Contains(dest) && source.Size() == dest.Size() && offset == (dest.TopLeft() - source.TopLeft()), "Messed up clipping, crash or corruption will follow"); if (source.IsEmpty() || source == dest) { return; } long naturalStride = ComputeStride(mSize, mFormat); if (mStride == naturalStride && dest.width == bounds.width) { // Fast path: this is a vertical shift of some rows in a // "normal" image surface. We can directly memmove and // hopefully stay in SIMD land. unsigned char* dst = mData + dest.y * mStride; const unsigned char* src = mData + source.y * mStride; size_t nBytes = dest.height * mStride; memmove(dst, src, nBytes); return; } // Slow(er) path: have to move row-by-row. const PRInt32 bpp = BytePerPixelFromFormat(mFormat); const size_t nRowBytes = dest.width * bpp; // dstRow points at the first pixel within the current destination // row, and similarly for srcRow. endSrcRow is one row beyond the // last row we need to copy. stride is either +mStride or // -mStride, depending on which direction we're copying. unsigned char* dstRow; unsigned char* srcRow; unsigned char* endSrcRow; // NB: this may point outside the image long stride; if (dest.y > source.y) { // We're copying down from source to dest, so walk backwards // starting from the last rows to avoid stomping pixels we // need. stride = -mStride; dstRow = mData + dest.x * bpp + (dest.YMost() - 1) * mStride; srcRow = mData + source.x * bpp + (source.YMost() - 1) * mStride; endSrcRow = mData + source.x * bpp + (source.y - 1) * mStride; } else { stride = mStride; dstRow = mData + dest.x * bpp + dest.y * mStride; srcRow = mData + source.x * bpp + source.y * mStride; endSrcRow = mData + source.x * bpp + source.YMost() * mStride; } for (; srcRow != endSrcRow; dstRow += stride, srcRow += stride) { memmove(dstRow, srcRow, nRowBytes); } }