# # ***** BEGIN LICENSE BLOCK ***** # Version: MPL 1.1/GPL 2.0/LGPL 2.1 # # The contents of this file are subject to the Mozilla Public License Version # 1.1 (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # http://www.mozilla.org/MPL/ # # Software distributed under the License is distributed on an "AS IS" basis, # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License # for the specific language governing rights and limitations under the # License. # # The Original Code is mozilla.org code. # # The Initial Developer of the Original Code is # Netscape Communications Corporation. # Portions created by the Initial Developer are Copyright (C) 1998 # the Initial Developer. All Rights Reserved. # # Contributor(s): # Benjamin Smedberg # # Alternatively, the contents of this file may be used under the terms of # either of the GNU General Public License Version 2 or later (the "GPL"), # or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), # in which case the provisions of the GPL or the LGPL are applicable instead # of those above. If you wish to allow use of your version of this file only # under the terms of either the GPL or the LGPL, and not to allow others to # use your version of this file under the terms of the MPL, indicate your # decision by deleting the provisions above and replace them with the notice # and other provisions required by the GPL or the LGPL. If you do not delete # the provisions above, a recipient may use your version of this file under # the terms of any one of the MPL, the GPL or the LGPL. # # ***** END LICENSE BLOCK ***** # # config.mk # # Determines the platform and builds the macros needed to load the # appropriate platform-specific .mk file, then defines all (most?) # of the generic macros. # # Define an include-at-most-once flag ifdef INCLUDED_CONFIG_MK $(error Don't include config.mk twice!) endif INCLUDED_CONFIG_MK = 1 EXIT_ON_ERROR = set -e; # Shell loops continue past errors without this. ifndef topsrcdir topsrcdir = $(DEPTH) endif ifndef INCLUDED_AUTOCONF_MK include $(DEPTH)/config/autoconf.mk endif COMMA = , # Sanity check some variables CHECK_VARS := \ XPI_NAME \ LIBRARY_NAME \ MODULE \ DEPTH \ SHORT_LIBNAME \ XPI_PKGNAME \ INSTALL_EXTENSION_ID \ SHARED_LIBRARY_NAME \ STATIC_LIBRARY_NAME \ $(NULL) # checks for internal spaces or trailing spaces in the variable # named by $x check-variable = $(if $(filter-out 0 1,$(words $($(x))z)),$(error Spaces are not allowed in $(x))) $(foreach x,$(CHECK_VARS),$(check-variable)) core_abspath = $(if $(findstring :,$(1)),$(1),$(if $(filter /%,$(1)),$(1),$(CURDIR)/$(1))) nullstr := space :=$(nullstr) # EOL core_winabspath = $(firstword $(subst /, ,$(call core_abspath,$(1)))):$(subst $(space),,$(patsubst %,\\%,$(wordlist 2,$(words $(subst /, ,$(call core_abspath,$(1)))), $(strip $(subst /, ,$(call core_abspath,$(1))))))) # LIBXUL_DIST is not defined under js/src, thus we make it mean DIST there. LIBXUL_DIST ?= $(DIST) # FINAL_TARGET specifies the location into which we copy end-user-shipped # build products (typelibs, components, chrome). # # It will usually be the well-loved $(DIST)/bin, today, but can also be an # XPI-contents staging directory for ambitious and right-thinking extensions. FINAL_TARGET = $(if $(XPI_NAME),$(DIST)/xpi-stage/$(XPI_NAME),$(DIST)/bin) ifdef XPI_NAME DEFINES += -DXPI_NAME=$(XPI_NAME) endif # The VERSION_NUMBER is suffixed onto the end of the DLLs we ship. VERSION_NUMBER = 50 ifeq ($(HOST_OS_ARCH),WINNT) win_srcdir := $(subst $(topsrcdir),$(WIN_TOP_SRC),$(srcdir)) BUILD_TOOLS = $(WIN_TOP_SRC)/build/unix else win_srcdir := $(srcdir) BUILD_TOOLS = $(topsrcdir)/build/unix endif CONFIG_TOOLS = $(MOZ_BUILD_ROOT)/config AUTOCONF_TOOLS = $(topsrcdir)/build/autoconf ifeq ($(OS_ARCH),QNX) ifeq ($(OS_TARGET),NTO) LD := qcc -Vgcc_ntox86 -nostdlib else LD := $(CC) endif endif # # Strip off the excessively long version numbers on these platforms, # but save the version to allow multiple versions of the same base # platform to be built in the same tree. # ifneq (,$(filter FreeBSD HP-UX Linux NetBSD OpenBSD OSF1 SunOS,$(OS_ARCH))) OS_RELEASE := $(basename $(OS_RELEASE)) # Allow the user to ignore the OS_VERSION, which is usually irrelevant. ifdef WANT_MOZILLA_CONFIG_OS_VERSION OS_VERS := $(suffix $(OS_RELEASE)) OS_VERSION := $(shell echo $(OS_VERS) | sed 's/-.*//') endif endif OS_CONFIG := $(OS_ARCH)$(OS_RELEASE) FINAL_LINK_LIBS = $(DEPTH)/config/final-link-libs FINAL_LINK_COMPS = $(DEPTH)/config/final-link-comps FINAL_LINK_COMP_NAMES = $(DEPTH)/config/final-link-comp-names MOZ_UNICHARUTIL_LIBS = $(LIBXUL_DIST)/lib/$(LIB_PREFIX)unicharutil_s.$(LIB_SUFFIX) MOZ_WIDGET_SUPPORT_LIBS = $(DIST)/lib/$(LIB_PREFIX)widgetsupport_s.$(LIB_SUFFIX) CC := $(CC_WRAPPER) $(CC) CXX := $(CXX_WRAPPER) $(CXX) MKDIR ?= mkdir SLEEP ?= sleep TOUCH ?= touch ifndef .PYMAKE PYTHON_PATH = $(PYTHON) $(topsrcdir)/config/pythonpath.py else PYCOMMANDPATH += $(topsrcdir)/config PYTHON_PATH = %pythonpath main endif # determine debug-related options _DEBUG_CFLAGS := _DEBUG_LDFLAGS := ifdef MOZ_DEBUG _DEBUG_CFLAGS += $(MOZ_DEBUG_ENABLE_DEFS) $(MOZ_DEBUG_FLAGS) _DEBUG_LDFLAGS += $(MOZ_DEBUG_LDFLAGS) XULPPFLAGS += $(MOZ_DEBUG_ENABLE_DEFS) else _DEBUG_CFLAGS += $(MOZ_DEBUG_DISABLE_DEFS) XULPPFLAGS += $(MOZ_DEBUG_DISABLE_DEFS) ifdef MOZ_DEBUG_SYMBOLS _DEBUG_CFLAGS += $(MOZ_DEBUG_FLAGS) _DEBUG_LDFLAGS += $(MOZ_DEBUG_LDFLAGS) endif endif MOZALLOC_LIB = $(call EXPAND_LIBNAME_PATH,mozalloc,$(DIST)/lib) OS_CFLAGS += $(_DEBUG_CFLAGS) OS_CXXFLAGS += $(_DEBUG_CFLAGS) OS_LDFLAGS += $(_DEBUG_LDFLAGS) # XXX: What does this? Bug 482434 filed for better explanation. ifeq ($(OS_ARCH)_$(GNU_CC),WINNT_) ifdef MOZ_DEBUG ifneq (,$(MOZ_BROWSE_INFO)$(MOZ_BSCFILE)) OS_CFLAGS += -FR OS_CXXFLAGS += -FR endif else # ! MOZ_DEBUG # MOZ_DEBUG_SYMBOLS generates debug symbols in separate PDB files. # Used for generating an optimized build with debugging symbols. # Used in the Windows nightlies to generate symbols for crash reporting. ifdef MOZ_DEBUG_SYMBOLS ifeq ($(AS),yasm) ASFLAGS += -g cv8 else ASFLAGS += -Zi endif OS_CXXFLAGS += -Zi -UDEBUG -DNDEBUG OS_CFLAGS += -Zi -UDEBUG -DNDEBUG ifdef HAVE_64BIT_OS OS_LDFLAGS += -DEBUG -OPT:REF,ICF else OS_LDFLAGS += -DEBUG -OPT:REF endif endif ifdef MOZ_QUANTIFY # -FIXED:NO is needed for Quantify to work, but it increases the size # of executables, so only use it if building for Quantify. WIN32_EXE_LDFLAGS += -FIXED:NO # We need -OPT:NOICF to prevent identical methods from being merged together. # Otherwise, Quantify doesn't know which method was actually called when it's # showing you the profile. OS_LDFLAGS += -OPT:NOICF endif # # Handle trace-malloc in optimized builds. # No opt to give sane callstacks. # ifdef NS_TRACE_MALLOC MOZ_OPTIMIZE_FLAGS=-Zi -Od -UDEBUG -DNDEBUG ifdef HAVE_64BIT_OS OS_LDFLAGS = -DEBUG -PDB:NONE -OPT:REF,ICF else OS_LDFLAGS = -DEBUG -PDB:NONE -OPT:REF endif endif # NS_TRACE_MALLOC endif # MOZ_DEBUG # We don't build a static CRT when building a custom CRT, # it appears to be broken. So don't link to jemalloc if # the Makefile wants static CRT linking. ifeq ($(MOZ_MEMORY)_$(USE_STATIC_LIBS),1_1) # Disable default CRT libs and add the right lib path for the linker MOZ_GLUE_LDFLAGS= endif endif # WINNT && !GNU_CC ifndef MOZ_GLUE_PROGRAM_LDFLAGS MOZ_GLUE_PROGRAM_LDFLAGS=$(MOZ_GLUE_LDFLAGS) endif # # Build using PIC by default # _ENABLE_PIC=1 # Determine if module being compiled is destined # to be merged into libxul ifdef LIBXUL_LIBRARY ifdef IS_COMPONENT ifdef MODULE_NAME DEFINES += -DXPCOM_TRANSLATE_NSGM_ENTRY_POINT=1 else $(error Component makefile does not specify MODULE_NAME.) endif endif FORCE_STATIC_LIB=1 SHORT_LIBNAME= endif # If we are building this component into an extension/xulapp, it cannot be # statically linked. In the future we may want to add a xulapp meta-component # build option. ifdef XPI_NAME ifdef IS_COMPONENT EXPORT_LIBRARY= FORCE_STATIC_LIB= FORCE_SHARED_LIB=1 endif endif ifndef SHARED_LIBRARY_NAME ifdef LIBRARY_NAME SHARED_LIBRARY_NAME=$(LIBRARY_NAME) endif endif ifndef STATIC_LIBRARY_NAME ifdef LIBRARY_NAME STATIC_LIBRARY_NAME=$(LIBRARY_NAME) endif endif # No sense in profiling tools ifdef INTERNAL_TOOLS NO_PROFILE_GUIDED_OPTIMIZE = 1 endif # Don't build SIMPLE_PROGRAMS with PGO, since they don't need it anyway, # and we don't have the same build logic to re-link them in the second pass. ifdef SIMPLE_PROGRAMS NO_PROFILE_GUIDED_OPTIMIZE = 1 endif # No sense in profiling unit tests ifdef CPP_UNIT_TESTS NO_PROFILE_GUIDED_OPTIMIZE = 1 endif # Enable profile-based feedback ifndef NO_PROFILE_GUIDED_OPTIMIZE ifdef MOZ_PROFILE_GENERATE OS_CFLAGS += $(PROFILE_GEN_CFLAGS) OS_CXXFLAGS += $(PROFILE_GEN_CFLAGS) OS_LDFLAGS += $(PROFILE_GEN_LDFLAGS) ifeq (WINNT,$(OS_ARCH)) AR_FLAGS += -LTCG endif endif # MOZ_PROFILE_GENERATE ifdef MOZ_PROFILE_USE OS_CFLAGS += $(PROFILE_USE_CFLAGS) OS_CXXFLAGS += $(PROFILE_USE_CFLAGS) OS_LDFLAGS += $(PROFILE_USE_LDFLAGS) ifeq (WINNT,$(OS_ARCH)) AR_FLAGS += -LTCG endif endif # MOZ_PROFILE_USE endif # NO_PROFILE_GUIDED_OPTIMIZE # Does the makefile specifies the internal XPCOM API linkage? ifneq (,$(MOZILLA_INTERNAL_API)$(LIBXUL_LIBRARY)) DEFINES += -DMOZILLA_INTERNAL_API endif # Force XPCOM/widget/gfx methods to be _declspec(dllexport) when we're # building libxul libraries ifdef LIBXUL_LIBRARY DEFINES += \ -D_IMPL_NS_COM \ -DEXPORT_XPT_API \ -DEXPORT_XPTC_API \ -D_IMPL_NS_GFX \ -D_IMPL_NS_WIDGET \ -DIMPL_XREAPI \ -DIMPL_NS_NET \ -DIMPL_THEBES \ $(NULL) ifndef JS_SHARED_LIBRARY DEFINES += -DSTATIC_EXPORTABLE_JS_API endif endif # Flags passed to JarMaker.py MAKE_JARS_FLAGS = \ -t $(topsrcdir) \ -f $(MOZ_CHROME_FILE_FORMAT) \ $(NULL) ifdef USE_EXTENSION_MANIFEST MAKE_JARS_FLAGS += -e endif ifdef BOTH_MANIFESTS MAKE_JARS_FLAGS += --both-manifests endif TAR_CREATE_FLAGS = -cvhf ifeq ($(OS_ARCH),BSD_OS) TAR_CREATE_FLAGS = -cvLf endif ifeq ($(OS_ARCH),OS2) TAR_CREATE_FLAGS = -cvf endif # # Personal makefile customizations go in these optional make include files. # MY_CONFIG := $(DEPTH)/config/myconfig.mk MY_RULES := $(DEPTH)/config/myrules.mk # # Default command macros; can be overridden in .mk. # CCC = $(CXX) PURIFY = purify $(PURIFYOPTIONS) QUANTIFY = quantify $(QUANTIFYOPTIONS) ifdef CROSS_COMPILE XPIDL_COMPILE = $(LIBXUL_DIST)/host/bin/host_xpidl$(HOST_BIN_SUFFIX) else XPIDL_COMPILE = $(LIBXUL_DIST)/bin/xpidl$(BIN_SUFFIX) endif XPIDL_LINK = $(PYTHON) $(LIBXUL_DIST)/sdk/bin/xpt.py link # Java macros JAVA_GEN_DIR = _javagen JAVA_DIST_DIR = $(DEPTH)/$(JAVA_GEN_DIR) JAVA_IFACES_PKG_NAME = org/mozilla/interfaces INCLUDES = \ $(LOCAL_INCLUDES) \ -I$(srcdir) \ -I. \ -I$(DIST)/include -I$(DIST)/include/nsprpub \ $(if $(LIBXUL_SDK),-I$(LIBXUL_SDK)/include -I$(LIBXUL_SDK)/include/nsprpub) \ $(OS_INCLUDES) \ $(NULL) include $(topsrcdir)/config/static-checking-config.mk CFLAGS = $(OS_CFLAGS) CXXFLAGS = $(OS_CXXFLAGS) LDFLAGS = $(OS_LDFLAGS) $(MOZ_FIX_LINK_PATHS) # Allow each module to override the *default* optimization settings # by setting MODULE_OPTIMIZE_FLAGS if the developer has not given # arguments to --enable-optimize ifdef MOZ_OPTIMIZE ifeq (1,$(MOZ_OPTIMIZE)) ifdef MODULE_OPTIMIZE_FLAGS CFLAGS += $(MODULE_OPTIMIZE_FLAGS) CXXFLAGS += $(MODULE_OPTIMIZE_FLAGS) else ifneq (,$(if $(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE),$(MOZ_PGO_OPTIMIZE_FLAGS))) CFLAGS += $(MOZ_PGO_OPTIMIZE_FLAGS) CXXFLAGS += $(MOZ_PGO_OPTIMIZE_FLAGS) else CFLAGS += $(MOZ_OPTIMIZE_FLAGS) CXXFLAGS += $(MOZ_OPTIMIZE_FLAGS) endif # neq (,$(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE)) endif # MODULE_OPTIMIZE_FLAGS else CFLAGS += $(MOZ_OPTIMIZE_FLAGS) CXXFLAGS += $(MOZ_OPTIMIZE_FLAGS) endif # MOZ_OPTIMIZE == 1 LDFLAGS += $(MOZ_OPTIMIZE_LDFLAGS) endif # MOZ_OPTIMIZE ifdef CROSS_COMPILE HOST_CFLAGS += $(HOST_OPTIMIZE_FLAGS) else ifdef MOZ_OPTIMIZE ifeq (1,$(MOZ_OPTIMIZE)) ifdef MODULE_OPTIMIZE_FLAGS HOST_CFLAGS += $(MODULE_OPTIMIZE_FLAGS) else HOST_CFLAGS += $(MOZ_OPTIMIZE_FLAGS) endif # MODULE_OPTIMIZE_FLAGS else HOST_CFLAGS += $(MOZ_OPTIMIZE_FLAGS) endif # MOZ_OPTIMIZE == 1 endif # MOZ_OPTIMIZE endif # CROSS_COMPILE CFLAGS += $(MOZ_FRAMEPTR_FLAGS) CXXFLAGS += $(MOZ_FRAMEPTR_FLAGS) # Check for FAIL_ON_WARNINGS & FAIL_ON_WARNINGS_DEBUG (Shorthand for Makefiles # to request that we use the 'warnings as errors' compile flags) # NOTE: First, we clear FAIL_ON_WARNINGS[_DEBUG] if we're doing a Windows PGO # build, since WARNINGS_AS_ERRORS has been suspected of causing isuses in that # situation. (See bug 437002.) ifeq (WINNT_1,$(OS_ARCH)_$(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE)) FAIL_ON_WARNINGS_DEBUG= FAIL_ON_WARNINGS= endif # WINNT && (MOS_PROFILE_GENERATE ^ MOZ_PROFILE_USE) # Now, check for debug version of flag; it turns on normal flag in debug builds. ifdef FAIL_ON_WARNINGS_DEBUG ifdef MOZ_DEBUG FAIL_ON_WARNINGS = 1 endif # MOZ_DEBUG endif # FAIL_ON_WARNINGS_DEBUG # Check for normal version of flag, and add WARNINGS_AS_ERRORS if it's set to 1. ifdef FAIL_ON_WARNINGS CXXFLAGS += $(WARNINGS_AS_ERRORS) CFLAGS += $(WARNINGS_AS_ERRORS) endif # FAIL_ON_WARNINGS ifeq ($(OS_ARCH)_$(GNU_CC),WINNT_) #// Currently, unless USE_STATIC_LIBS is defined, the multithreaded #// DLL version of the RTL is used... #// #//------------------------------------------------------------------------ ifdef USE_STATIC_LIBS RTL_FLAGS=-MT # Statically linked multithreaded RTL ifneq (,$(MOZ_DEBUG)$(NS_TRACE_MALLOC)) ifndef MOZ_NO_DEBUG_RTL RTL_FLAGS=-MTd # Statically linked multithreaded MSVC4.0 debug RTL endif endif # MOZ_DEBUG || NS_TRACE_MALLOC else # !USE_STATIC_LIBS RTL_FLAGS=-MD # Dynamically linked, multithreaded RTL ifneq (,$(MOZ_DEBUG)$(NS_TRACE_MALLOC)) ifndef MOZ_NO_DEBUG_RTL RTL_FLAGS=-MDd # Dynamically linked, multithreaded MSVC4.0 debug RTL endif endif # MOZ_DEBUG || NS_TRACE_MALLOC endif # USE_STATIC_LIBS endif # WINNT && !GNU_CC ifeq ($(OS_ARCH),Darwin) # Compiling ObjC requires an Apple compiler anyway, so it's ok to set # host CMFLAGS here. HOST_CMFLAGS += -fobjc-exceptions HOST_CMMFLAGS += -fobjc-exceptions OS_COMPILE_CMFLAGS += -fobjc-exceptions OS_COMPILE_CMMFLAGS += -fobjc-exceptions ifeq ($(MOZ_WIDGET_TOOLKIT),uikit) OS_COMPILE_CMFLAGS += -fobjc-abi-version=2 -fobjc-legacy-dispatch OS_COMPILE_CMMFLAGS += -fobjc-abi-version=2 -fobjc-legacy-dispatch endif endif COMPILE_CFLAGS = $(VISIBILITY_FLAGS) $(DEFINES) $(INCLUDES) $(DSO_CFLAGS) $(DSO_PIC_CFLAGS) $(CFLAGS) $(RTL_FLAGS) $(OS_COMPILE_CFLAGS) COMPILE_CXXFLAGS = $(STL_FLAGS) $(VISIBILITY_FLAGS) $(DEFINES) $(INCLUDES) $(DSO_CFLAGS) $(DSO_PIC_CFLAGS) $(CXXFLAGS) $(RTL_FLAGS) $(OS_COMPILE_CXXFLAGS) COMPILE_CMFLAGS = $(OS_COMPILE_CMFLAGS) COMPILE_CMMFLAGS = $(OS_COMPILE_CMMFLAGS) ifndef CROSS_COMPILE HOST_CFLAGS += $(RTL_FLAGS) endif # # Name of the binary code directories # # Override defaults # We need to know where to find the libraries we # put on the link line for binaries, and should # we link statically or dynamic? Assuming dynamic for now. ifneq (WINNT_,$(OS_ARCH)_$(GNU_CC)) LIBS_DIR = -L$(DIST)/bin -L$(DIST)/lib ifdef LIBXUL_SDK LIBS_DIR += -L$(LIBXUL_SDK)/bin -L$(LIBXUL_SDK)/lib endif endif # Default location of include files IDL_DIR = $(DIST)/idl XPIDL_FLAGS = -I$(srcdir) -I$(IDL_DIR) ifdef LIBXUL_SDK XPIDL_FLAGS += -I$(LIBXUL_SDK)/idl endif SDK_LIB_DIR = $(DIST)/sdk/lib SDK_BIN_DIR = $(DIST)/sdk/bin DEPENDENCIES = .md MOZ_COMPONENT_LIBS=$(XPCOM_LIBS) $(MOZ_COMPONENT_NSPR_LIBS) ifeq ($(OS_ARCH),OS2) ELF_DYNSTR_GC = echo else ELF_DYNSTR_GC = : endif ifndef CROSS_COMPILE ifdef USE_ELF_DYNSTR_GC ifdef MOZ_COMPONENTS_VERSION_SCRIPT_LDFLAGS ELF_DYNSTR_GC = $(DEPTH)/config/elf-dynstr-gc endif endif endif ifeq ($(OS_ARCH),Darwin) ifdef NEXT_ROOT export NEXT_ROOT PBBUILD = NEXT_ROOT= $(PBBUILD_BIN) else # NEXT_ROOT PBBUILD = $(PBBUILD_BIN) endif # NEXT_ROOT PBBUILD_SETTINGS = GCC_VERSION="$(GCC_VERSION)" SYMROOT=build ARCHS="$(OS_TEST)" ifdef MACOS_SDK_DIR PBBUILD_SETTINGS += SDKROOT="$(MACOS_SDK_DIR)" endif # MACOS_SDK_DIR ifdef MACOSX_DEPLOYMENT_TARGET export MACOSX_DEPLOYMENT_TARGET PBBUILD_SETTINGS += MACOSX_DEPLOYMENT_TARGET="$(MACOSX_DEPLOYMENT_TARGET)" endif # MACOSX_DEPLOYMENT_TARGET ifdef MOZ_OPTIMIZE ifeq (2,$(MOZ_OPTIMIZE)) # Only override project defaults if the config specified explicit settings PBBUILD_SETTINGS += GCC_MODEL_TUNING= OPTIMIZATION_CFLAGS="$(MOZ_OPTIMIZE_FLAGS)" endif # MOZ_OPTIMIZE=2 endif # MOZ_OPTIMIZE endif # OS_ARCH=Darwin ifdef MOZ_NATIVE_MAKEDEPEND MKDEPEND_DIR = MKDEPEND = $(MOZ_NATIVE_MAKEDEPEND) else MKDEPEND_DIR = $(CONFIG_TOOLS)/mkdepend MKDEPEND = $(MKDEPEND_DIR)/mkdepend$(BIN_SUFFIX) endif # Set link flags according to whether we want a console. ifdef MOZ_WINCONSOLE ifeq ($(MOZ_WINCONSOLE),1) ifeq ($(OS_ARCH),OS2) BIN_FLAGS += -Zlinker -PM:VIO endif ifeq ($(OS_ARCH),WINNT) ifdef GNU_CC WIN32_EXE_LDFLAGS += -mconsole else WIN32_EXE_LDFLAGS += -SUBSYSTEM:CONSOLE endif endif else # MOZ_WINCONSOLE ifeq ($(OS_ARCH),OS2) BIN_FLAGS += -Zlinker -PM:PM endif ifeq ($(OS_ARCH),WINNT) ifdef GNU_CC WIN32_EXE_LDFLAGS += -mwindows else WIN32_EXE_LDFLAGS += -SUBSYSTEM:WINDOWS endif endif endif endif # If we're building a component on MSVC, we don't want to generate an # import lib, because that import lib will collide with the name of a # static version of the same library. ifeq ($(GNU_LD)$(OS_ARCH),WINNT) ifdef IS_COMPONENT LDFLAGS += -IMPLIB:fake.lib DELETE_AFTER_LINK = fake.lib fake.exp endif endif # # Include any personal overrides the user might think are needed. # -include $(topsrcdir)/$(MOZ_BUILD_APP)/app-config.mk -include $(MY_CONFIG) ###################################################################### # Now test variables that might have been set or overridden by $(MY_CONFIG). DEFINES += -DOSTYPE=\"$(OS_CONFIG)\" DEFINES += -DOSARCH=$(OS_ARCH) ###################################################################### GARBAGE += $(DEPENDENCIES) $(MKDEPENDENCIES) $(MKDEPENDENCIES).bak core $(wildcard core.[0-9]*) $(wildcard *.err) $(wildcard *.pure) $(wildcard *_pure_*.o) Templates.DB ifeq ($(OS_ARCH),Darwin) ifndef NSDISTMODE NSDISTMODE=absolute_symlink endif PWD := $(CURDIR) endif ifdef NSINSTALL_BIN NSINSTALL = $(NSINSTALL_BIN) else ifeq (OS2,$(CROSS_COMPILE)$(OS_ARCH)) NSINSTALL = $(MOZ_TOOLS_DIR)/nsinstall else NSINSTALL = $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX) endif # OS2 endif # NSINSTALL_BIN ifeq (,$(CROSS_COMPILE)$(filter-out WINNT OS2, $(OS_ARCH))) INSTALL = $(NSINSTALL) else # This isn't laid out as conditional directives so that NSDISTMODE can be # target-specific. INSTALL = $(if $(filter copy, $(NSDISTMODE)), $(NSINSTALL) -t, $(if $(filter absolute_symlink, $(NSDISTMODE)), $(NSINSTALL) -L $(PWD), $(NSINSTALL) -R)) endif # WINNT/OS2 # Use nsinstall in copy mode to install files on the system SYSINSTALL = $(NSINSTALL) -t # Directory nsinstall. Windows and OS/2 nsinstall can't recursively copy # directories. ifneq (,$(filter WINNT os2-emx,$(HOST_OS_ARCH))) DIR_INSTALL = $(PYTHON) $(topsrcdir)/config/nsinstall.py else DIR_INSTALL = $(INSTALL) endif # WINNT/OS2 # # Localization build automation # # Because you might wish to "make locales AB_CD=ab-CD", we don't hardcode # MOZ_UI_LOCALE directly, but use an intermediate variable that can be # overridden by the command line. (Besides, AB_CD is prettier). AB_CD = $(MOZ_UI_LOCALE) ifndef L10NBASEDIR L10NBASEDIR = $(error L10NBASEDIR not defined by configure) endif EXPAND_LOCALE_SRCDIR = $(if $(filter en-US,$(AB_CD)),$(topsrcdir)/$(1)/en-US,$(L10NBASEDIR)/$(AB_CD)/$(subst /locales,,$(1))) ifdef relativesrcdir LOCALE_SRCDIR = $(call EXPAND_LOCALE_SRCDIR,$(relativesrcdir)) endif ifdef LOCALE_SRCDIR # if LOCALE_MERGEDIR is set, use mergedir first, then the localization, # and finally en-US ifdef LOCALE_MERGEDIR MAKE_JARS_FLAGS += -c $(LOCALE_MERGEDIR)/$(subst /locales,,$(relativesrcdir)) endif MAKE_JARS_FLAGS += -c $(LOCALE_SRCDIR) ifdef LOCALE_MERGEDIR MAKE_JARS_FLAGS += -c $(topsrcdir)/$(relativesrcdir)/en-US endif endif ifdef LOCALE_MERGEDIR MERGE_FILE = $(firstword \ $(wildcard $(LOCALE_MERGEDIR)/$(subst /locales,,$(relativesrcdir))/$(1)) \ $(wildcard $(LOCALE_SRCDIR)/$(1)) \ $(srcdir)/en-US/$(1) ) else MERGE_FILE = $(LOCALE_SRCDIR)/$(1) endif MERGE_FILES = $(foreach f,$(1),$(call MERGE_FILE,$(f))) ifeq (OS2,$(OS_ARCH)) RUN_TEST_PROGRAM = $(topsrcdir)/build/os2/test_os2.cmd "$(LIBXUL_DIST)" else ifneq (WINNT,$(OS_ARCH)) RUN_TEST_PROGRAM = $(LIBXUL_DIST)/bin/run-mozilla.sh endif # ! WINNT endif # ! OS2 # # Java macros # # Make sure any compiled classes work with at least JVM 1.4 JAVAC_FLAGS += -source 1.4 ifdef MOZ_DEBUG JAVAC_FLAGS += -g endif ifdef TIERS DIRS += $(foreach tier,$(TIERS),$(tier_$(tier)_dirs)) STATIC_DIRS += $(foreach tier,$(TIERS),$(tier_$(tier)_staticdirs)) endif OPTIMIZE_JARS_CMD = $(PYTHON) $(call core_abspath,$(topsrcdir)/config/optimizejars.py) CREATE_PRECOMPLETE_CMD = $(PYTHON) $(call core_abspath,$(topsrcdir)/config/createprecomplete.py) EXPAND_LIBS = $(PYTHON) -I$(DEPTH)/config $(topsrcdir)/config/expandlibs.py EXPAND_LIBS_EXEC = $(PYTHON) $(topsrcdir)/config/pythonpath.py -I$(DEPTH)/config $(topsrcdir)/config/expandlibs_exec.py EXPAND_LIBS_GEN = $(PYTHON) $(topsrcdir)/config/pythonpath.py -I$(DEPTH)/config $(topsrcdir)/config/expandlibs_gen.py EXPAND_AR = $(EXPAND_LIBS_EXEC) --extract -- $(AR) EXPAND_CC = $(EXPAND_LIBS_EXEC) --uselist -- $(CC) EXPAND_CCC = $(EXPAND_LIBS_EXEC) --uselist -- $(CCC) EXPAND_LD = $(EXPAND_LIBS_EXEC) --uselist $(if $(REORDER),--reorder $(REORDER))-- $(LD) EXPAND_MKSHLIB = $(EXPAND_LIBS_EXEC) --uselist $(if $(REORDER),--reorder $(REORDER))-- $(MKSHLIB) ifdef STDCXX_COMPAT CHECK_STDCXX = objdump -p $(1) | grep -e 'GLIBCXX_3\.4\.\(9\|[1-9][0-9]\)' > /dev/null && echo "TEST-UNEXPECTED-FAIL | | We don't want these libstdc++ symbols to be used:" && objdump -T $(1) | grep -e 'GLIBCXX_3\.4\.\(9\|[1-9][0-9]\)' && exit 1 || exit 0 endif # autoconf.mk sets OBJ_SUFFIX to an error to avoid use before including # this file OBJ_SUFFIX := $(_OBJ_SUFFIX) # PGO builds with GCC build objects with instrumentation in a first pass, # then objects optimized, without instrumentation, in a second pass. If # we overwrite the ojects from the first pass with those from the second, # we end up not getting instrumentation data for better optimization on # incremental builds. As a consequence, we use a different object suffix # for the first pass. ifndef NO_PROFILE_GUIDED_OPTIMIZE ifdef MOZ_PROFILE_GENERATE ifdef GNU_CC OBJ_SUFFIX := i_o endif endif endif