/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- * vim: sw=4 ts=4 et : */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Plugin App. * * The Initial Developer of the Original Code is * Chris Jones * Portions created by the Initial Developer are Copyright (C) 2009 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "mozilla/ipc/AsyncChannel.h" #include "mozilla/ipc/BrowserProcessSubThread.h" #include "mozilla/ipc/ProtocolUtils.h" #include "nsDebug.h" #include "nsTraceRefcnt.h" #include "nsXULAppAPI.h" using mozilla::MutexAutoLock; template<> struct RunnableMethodTraits { static void RetainCallee(mozilla::ipc::AsyncChannel* obj) { } static void ReleaseCallee(mozilla::ipc::AsyncChannel* obj) { } }; // We rely on invariants about the lifetime of the transport: // // - outlives this AsyncChannel // - deleted on the IO thread // // These invariants allow us to send messages directly through the // transport without having to worry about orphaned Send() tasks on // the IO thread touching AsyncChannel memory after it's been deleted // on the worker thread. We also don't need to refcount the // Transport, because whatever task triggers its deletion only runs on // the IO thread, and only runs after this AsyncChannel is done with // the Transport. template<> struct RunnableMethodTraits { static void RetainCallee(mozilla::ipc::AsyncChannel::Transport* obj) { } static void ReleaseCallee(mozilla::ipc::AsyncChannel::Transport* obj) { } }; namespace { // This is an async message class GoodbyeMessage : public IPC::Message { public: enum { ID = GOODBYE_MESSAGE_TYPE }; GoodbyeMessage() : IPC::Message(MSG_ROUTING_NONE, ID, PRIORITY_NORMAL) { } // XXX not much point in implementing this; maybe could help with // debugging? static bool Read(const Message* msg) { return true; } void Log(const std::string& aPrefix, FILE* aOutf) const { fputs("(special `Goodbye' message)", aOutf); } }; } // namespace namespace mozilla { namespace ipc { AsyncChannel::AsyncChannel(AsyncListener* aListener) : mTransport(0), mListener(aListener), mChannelState(ChannelClosed), mMutex("mozilla.ipc.AsyncChannel.mMutex"), mCvar(mMutex, "mozilla.ipc.AsyncChannel.mCvar"), mIOLoop(), mWorkerLoop(), mChild(false), mChannelErrorTask(NULL), mExistingListener(NULL) { MOZ_COUNT_CTOR(AsyncChannel); } AsyncChannel::~AsyncChannel() { MOZ_COUNT_DTOR(AsyncChannel); Clear(); } bool AsyncChannel::Open(Transport* aTransport, MessageLoop* aIOLoop) { NS_PRECONDITION(!mTransport, "Open() called > once"); NS_PRECONDITION(aTransport, "need transport layer"); // FIXME need to check for valid channel mTransport = aTransport; mExistingListener = mTransport->set_listener(this); // FIXME figure out whether we're in parent or child, grab IO loop // appropriately bool needOpen = true; if(!aIOLoop) { // parent needOpen = false; aIOLoop = XRE_GetIOMessageLoop(); // FIXME assuming that the parent waits for the OnConnected event. // FIXME see GeckoChildProcessHost.cpp. bad assumption! mChannelState = ChannelConnected; } mChild = needOpen; mIOLoop = aIOLoop; mWorkerLoop = MessageLoop::current(); NS_ASSERTION(mIOLoop, "need an IO loop"); NS_ASSERTION(mWorkerLoop, "need a worker loop"); if (needOpen) { // child process MutexAutoLock lock(mMutex); mIOLoop->PostTask(FROM_HERE, NewRunnableMethod(this, &AsyncChannel::OnChannelOpened)); // FIXME/cjones: handle errors while (mChannelState != ChannelConnected) { mCvar.Wait(); } } return true; } void AsyncChannel::Close() { AssertWorkerThread(); { MutexAutoLock lock(mMutex); if (ChannelError == mChannelState || ChannelTimeout == mChannelState) { // See bug 538586: if the listener gets deleted while the // IO thread's NotifyChannelError event is still enqueued // and subsequently deletes us, then the error event will // also be deleted and the listener will never be notified // of the channel error. if (mListener) { MutexAutoUnlock unlock(mMutex); NotifyMaybeChannelError(); } return; } if (ChannelConnected != mChannelState) // XXX be strict about this until there's a compelling reason // to relax NS_RUNTIMEABORT("Close() called on closed channel!"); AssertWorkerThread(); // notify the other side that we're about to close our socket SendSpecialMessage(new GoodbyeMessage()); SynchronouslyClose(); } NotifyChannelClosed(); } void AsyncChannel::SynchronouslyClose() { AssertWorkerThread(); mMutex.AssertCurrentThreadOwns(); mIOLoop->PostTask( FROM_HERE, NewRunnableMethod(this, &AsyncChannel::OnCloseChannel)); while (ChannelClosed != mChannelState) mCvar.Wait(); } bool AsyncChannel::Send(Message* msg) { AssertWorkerThread(); mMutex.AssertNotCurrentThreadOwns(); NS_ABORT_IF_FALSE(MSG_ROUTING_NONE != msg->routing_id(), "need a route"); { MutexAutoLock lock(mMutex); if (!Connected()) { ReportConnectionError("AsyncChannel"); return false; } SendThroughTransport(msg); } return true; } void AsyncChannel::OnDispatchMessage(const Message& msg) { AssertWorkerThread(); NS_ASSERTION(!msg.is_reply(), "can't process replies here"); NS_ASSERTION(!(msg.is_sync() || msg.is_rpc()), "async dispatch only"); if (MSG_ROUTING_NONE == msg.routing_id()) { if (!OnSpecialMessage(msg.type(), msg)) // XXX real error handling NS_RUNTIMEABORT("unhandled special message!"); return; } // it's OK to dispatch messages if the channel is closed/error'd, // since we don't have a reply to send back (void)MaybeHandleError(mListener->OnMessageReceived(msg), "AsyncChannel"); } bool AsyncChannel::OnSpecialMessage(uint16 id, const Message& msg) { return false; } void AsyncChannel::SendSpecialMessage(Message* msg) const { AssertWorkerThread(); SendThroughTransport(msg); } void AsyncChannel::SendThroughTransport(Message* msg) const { AssertWorkerThread(); mIOLoop->PostTask( FROM_HERE, NewRunnableMethod(mTransport, &Transport::Send, msg)); } void AsyncChannel::OnNotifyMaybeChannelError() { AssertWorkerThread(); mMutex.AssertNotCurrentThreadOwns(); // OnChannelError holds mMutex when it posts this task and this // task cannot be allowed to run until OnChannelError has // exited. We enforce that order by grabbing the mutex here which // should only continue once OnChannelError has completed. { MutexAutoLock lock(mMutex); // nothing to do here } if (ShouldDeferNotifyMaybeError()) { mChannelErrorTask = NewRunnableMethod(this, &AsyncChannel::OnNotifyMaybeChannelError); // 10 ms delay is completely arbitrary mWorkerLoop->PostDelayedTask(FROM_HERE, mChannelErrorTask, 10); return; } NotifyMaybeChannelError(); } void AsyncChannel::NotifyChannelClosed() { mMutex.AssertNotCurrentThreadOwns(); if (ChannelClosed != mChannelState) NS_RUNTIMEABORT("channel should have been closed!"); // OK, the IO thread just closed the channel normally. Let the // listener know about it. mListener->OnChannelClose(); Clear(); } void AsyncChannel::NotifyMaybeChannelError() { mMutex.AssertNotCurrentThreadOwns(); // TODO sort out Close() on this side racing with Close() on the // other side if (ChannelClosing == mChannelState) { // the channel closed, but we received a "Goodbye" message // warning us about it. no worries mChannelState = ChannelClosed; NotifyChannelClosed(); return; } // Oops, error! Let the listener know about it. mChannelState = ChannelError; mListener->OnChannelError(); Clear(); } void AsyncChannel::Clear() { mListener = 0; mIOLoop = 0; mWorkerLoop = 0; if (mTransport) { mTransport->set_listener(0); // we only hold a weak ref to the transport, which is "owned" // by GeckoChildProcess/GeckoThread mTransport = 0; } if (mChannelErrorTask) { mChannelErrorTask->Cancel(); mChannelErrorTask = NULL; } } bool AsyncChannel::MaybeHandleError(Result code, const char* channelName) { if (MsgProcessed == code) return true; const char* errorMsg; switch (code) { case MsgNotKnown: errorMsg = "Unknown message: not processed"; break; case MsgNotAllowed: errorMsg = "Message not allowed: cannot be sent/recvd in this state"; break; case MsgPayloadError: errorMsg = "Payload error: message could not be deserialized"; break; case MsgProcessingError: errorMsg = "Processing error: message was deserialized, but the handler returned false (indicating failure)"; break; case MsgRouteError: errorMsg = "Route error: message sent to unknown actor ID"; break; case MsgValueError: errorMsg = "Value error: message was deserialized, but contained an illegal value"; break; default: NS_RUNTIMEABORT("unknown Result code"); return false; } PrintErrorMessage(channelName, errorMsg); mListener->OnProcessingError(code); return false; } void AsyncChannel::ReportConnectionError(const char* channelName) const { const char* errorMsg; switch (mChannelState) { case ChannelClosed: errorMsg = "Closed channel: cannot send/recv"; break; case ChannelOpening: errorMsg = "Opening channel: not yet ready for send/recv"; break; case ChannelTimeout: errorMsg = "Channel timeout: cannot send/recv"; break; case ChannelClosing: errorMsg = "Channel closing: too late to send/recv, messages will be lost"; break; case ChannelError: errorMsg = "Channel error: cannot send/recv"; break; default: NS_RUNTIMEABORT("unreached"); } PrintErrorMessage(channelName, errorMsg); mListener->OnProcessingError(MsgDropped); } // // The methods below run in the context of the IO thread // void AsyncChannel::OnMessageReceived(const Message& msg) { AssertIOThread(); NS_ASSERTION(mChannelState != ChannelError, "Shouldn't get here!"); MutexAutoLock lock(mMutex); if (!MaybeInterceptSpecialIOMessage(msg)) // wake up the worker, there's work to do mWorkerLoop->PostTask( FROM_HERE, NewRunnableMethod(this, &AsyncChannel::OnDispatchMessage, msg)); } void AsyncChannel::OnChannelOpened() { AssertIOThread(); mChannelState = ChannelOpening; /*assert*/mTransport->Connect(); } void AsyncChannel::DispatchOnChannelConnected(int32 peer_pid) { AssertWorkerThread(); if (mListener) mListener->OnChannelConnected(peer_pid); } void AsyncChannel::OnChannelConnected(int32 peer_pid) { AssertIOThread(); { MutexAutoLock lock(mMutex); mChannelState = ChannelConnected; mCvar.Notify(); } if(mExistingListener) mExistingListener->OnChannelConnected(peer_pid); mWorkerLoop->PostTask(FROM_HERE, NewRunnableMethod(this, &AsyncChannel::DispatchOnChannelConnected, peer_pid)); } void AsyncChannel::OnChannelError() { AssertIOThread(); MutexAutoLock lock(mMutex); if (ChannelClosing != mChannelState) mChannelState = ChannelError; PostErrorNotifyTask(); } void AsyncChannel::PostErrorNotifyTask() { AssertIOThread(); mMutex.AssertCurrentThreadOwns(); NS_ASSERTION(!mChannelErrorTask, "OnChannelError called twice?"); // This must be the last code that runs on this thread! mChannelErrorTask = NewRunnableMethod(this, &AsyncChannel::OnNotifyMaybeChannelError); mWorkerLoop->PostTask(FROM_HERE, mChannelErrorTask); } void AsyncChannel::OnCloseChannel() { AssertIOThread(); mTransport->Close(); MutexAutoLock lock(mMutex); mChannelState = ChannelClosed; mCvar.Notify(); } bool AsyncChannel::MaybeInterceptSpecialIOMessage(const Message& msg) { AssertIOThread(); mMutex.AssertCurrentThreadOwns(); if (MSG_ROUTING_NONE == msg.routing_id() && GOODBYE_MESSAGE_TYPE == msg.type()) { ProcessGoodbyeMessage(); return true; } return false; } void AsyncChannel::ProcessGoodbyeMessage() { AssertIOThread(); mMutex.AssertCurrentThreadOwns(); // TODO sort out Close() on this side racing with Close() on the // other side mChannelState = ChannelClosing; printf("NOTE: %s process received `Goodbye', closing down\n", mChild ? "child" : "parent"); } } // namespace ipc } // namespace mozilla