/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 2002
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *  Brian Ryner <bryner@brianryner.com>
 *  Benjamin Smedberg <bsmedberg@covad.net>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#ifndef _nsXULAppAPI_h__
#define _nsXULAppAPI_h__

#include "prtypes.h"
#include "nsID.h"
#include "xrecore.h"
#include "nsXPCOM.h"
#include "nsISupports.h"
#include "prlog.h"

/**
 * Application-specific data needed to start the apprunner.
 *
 * @status FROZEN - This API is stable. Additional fields may be added to the
 *                  end of the structure in the future. Runtime detection
 *                  of the version of nsXREAppData can be determined by
 *                  examining the "size" field.
 *
 * @note When this structure is allocated and manipulated by XRE_CreateAppData,
 *       string fields will be allocated with NS_Alloc, and interface pointers
 *       are strong references.
 */
struct nsXREAppData
{
  /**
   * This should be set to sizeof(nsXREAppData). This structure may be
   * extended in future releases, and this ensures that binary compatibility
   * is maintained.
   */
  PRUint32 size;

  /**
   * The directory of the application to be run. May be null if the
   * xulrunner and the app are installed into the same directory.
   */
  nsILocalFile* directory;

  /**
   * The name of the application vendor. This must be ASCII, and is normally
   * mixed-case, e.g. "Mozilla". Optional (may be null), but highly
   * recommended. Must not be the empty string.
   */
  const char *vendor;

  /**
   * The name of the application. This must be ASCII, and is normally
   * mixed-case, e.g. "Firefox". Required (must not be null or an empty
   * string).
   */
  const char *name;

  /**
   * The major version, e.g. "0.8.0+". Optional (may be null), but
   * required for advanced application features such as the extension
   * manager and update service. Must not be the empty string.
   */
  const char *version;

  /**
   * The application's build identifier, e.g. "2004051604"
   */
  const char *buildID;

  /**
   * The application's UUID. Used by the extension manager to determine
   * compatible extensions. Optional, but required for advanced application
   * features such as the extension manager and update service.
   *
   * This has traditionally been in the form
   * "{AAAAAAAA-BBBB-CCCC-DDDD-EEEEEEEEEEEE}" but for new applications
   * a more readable form is encouraged: "appname@vendor.tld". Only
   * the following characters are allowed: a-z A-Z 0-9 - . @ _ { } *
   */
  const char *ID;

  /**
   * The copyright information to print for the -h commandline flag,
   * e.g. "Copyright (c) 2003 mozilla.org".
   */
  const char *copyright;

  /**
   * Combination of NS_XRE_ prefixed flags (defined below).
   */
  PRUint32 flags;

  /**
   * The location of the XRE. XRE_main may not be able to figure this out
   * programatically.
   */
  nsILocalFile* xreDirectory;

  /**
   * The minimum/maximum compatible XRE version.
   */
  const char *minVersion;
  const char *maxVersion;

  /**
   * The server URL to send crash reports to.
   */
  const char *crashReporterURL;

  /**
   * The profile directory that will be used. Optional (may be null). Must not
   * be the empty string, must be ASCII. The path is split into components
   * along the path separator characters '/' and '\'.
   *
   * The application data directory ("UAppData", see below) is normally
   * composed as follows, where $HOME is platform-specific:
   *
   *   UAppData = $HOME[/$vendor]/$name
   *
   * If present, the 'profile' string will be used instead of the combination of
   * vendor and name as follows:
   *
   *   UAppData = $HOME/$profile
   */
  const char *profile;
};

/**
 * Indicates whether or not the profile migrator service may be
 * invoked at startup when creating a profile.
 */
#define NS_XRE_ENABLE_PROFILE_MIGRATOR (1 << 1)

/**
 * Indicates whether or not the extension manager service should be
 * initialized at startup.
 */
#define NS_XRE_ENABLE_EXTENSION_MANAGER (1 << 2)

/**
 * Indicates whether or not to use Breakpad crash reporting.
 */
#define NS_XRE_ENABLE_CRASH_REPORTER (1 << 3)

/**
 * A directory service key which provides the platform-correct "application
 * data" directory as follows, where $name and $vendor are as defined above and
 * $vendor is optional:
 *
 * Windows:
 *   HOME = Documents and Settings\$USER\Application Data
 *   UAppData = $HOME[\$vendor]\$name
 *
 * Unix:
 *   HOME = ~
 *   UAppData = $HOME/.[$vendor/]$name
 *
 * Mac:
 *   HOME = ~
 *   UAppData = $HOME/Library/Application Support/$name
 *
 * Note that the "profile" member above will change the value of UAppData as
 * follows:
 *
 * Windows:
 *   UAppData = $HOME\$profile
 *
 * Unix:
 *   UAppData = $HOME/.$profile
 *
 * Mac:
 *   UAppData = $HOME/Library/Application Support/$profile
 */
#define XRE_USER_APP_DATA_DIR "UAppData"

/**
 * A directory service key which provides a list of all enabled extension
 * directories. The list includes compatible platform-specific extension
 * subdirectories.
 *
 * @note The directory list will have no members when the application is
 *       launched in safe mode.
 */
#define XRE_EXTENSIONS_DIR_LIST "XREExtDL"

/**
 * A directory service key which provides the executable file used to
 * launch the current process.  This is the same value returned by the
 * XRE_GetBinaryPath function defined below.
 */
#define XRE_EXECUTABLE_FILE "XREExeF"

/**
 * A directory service key which specifies the profile
 * directory. Unlike the NS_APP_USER_PROFILE_50_DIR key, this key may
 * be available when the profile hasn't been "started", or after is
 * has been shut down. If the application is running without a
 * profile, such as when showing the profile manager UI, this key will
 * not be available. This key is provided by the XUL apprunner or by
 * the aAppDirProvider object passed to XRE_InitEmbedding.
 */
#define NS_APP_PROFILE_DIR_STARTUP "ProfDS"

/**
 * A directory service key which specifies the profile
 * directory. Unlike the NS_APP_USER_PROFILE_LOCAL_50_DIR key, this key may
 * be available when the profile hasn't been "started", or after is
 * has been shut down. If the application is running without a
 * profile, such as when showing the profile manager UI, this key will
 * not be available. This key is provided by the XUL apprunner or by
 * the aAppDirProvider object passed to XRE_InitEmbedding.
 */
#define NS_APP_PROFILE_LOCAL_DIR_STARTUP "ProfLDS"

/**
 * A directory service key which specifies the system extension
 * parent directory containing platform-specific extensions.
 * This key may not be available on all platforms.
 */
#define XRE_SYS_LOCAL_EXTENSION_PARENT_DIR "XRESysLExtPD"

/**
 * A directory service key which specifies the system extension
 * parent directory containing platform-independent extensions.
 * This key may not be available on all platforms.
 * Additionally, the directory may be equal to that returned by
 * XRE_SYS_LOCAL_EXTENSION_PARENT_DIR on some platforms.
 */
#define XRE_SYS_SHARE_EXTENSION_PARENT_DIR "XRESysSExtPD"

/**
 * A directory service key which specifies the user system extension
 * parent directory.
 */
#define XRE_USER_SYS_EXTENSION_DIR "XREUSysExt"

/**
 * Begin an XUL application. Does not return until the user exits the
 * application.
 *
 * @param argc/argv Command-line parameters to pass to the application. On
 *                  Windows, these should be in UTF8. On unix-like platforms
 *                  these are in the "native" character set.
 *
 * @param aAppData  Information about the application to be run.
 *
 * @return         A native result code suitable for returning from main().
 *
 * @note           If the binary is linked against the standalone XPCOM glue,
 *                 XPCOMGlueStartup() should be called before this method.
 *
 */
XRE_API(int,
        XRE_main, (int argc, char* argv[], const nsXREAppData* sAppData))

/**
 * Given a path relative to the current working directory (or an absolute
 * path), return an appropriate nsILocalFile object.
 *
 * @note Pass UTF8 strings on Windows... native charset on other platforms.
 */
XRE_API(nsresult,
        XRE_GetFileFromPath, (const char *aPath, nsILocalFile* *aResult))

/**
 * Get the path of the running application binary and store it in aResult.
 * @param argv0   The value passed as argv[0] of main(). This value is only
 *                used on *nix, and only when other methods of determining
 *                the binary path have failed.
 */
XRE_API(nsresult,
        XRE_GetBinaryPath, (const char *argv0, nsILocalFile* *aResult))

/**
 * Get the static components built in to libxul.
 */
XRE_API(void,
        XRE_GetStaticComponents, (nsStaticModuleInfo const **aStaticComponents,
                                  PRUint32 *aComponentCount))

/**
 * Lock a profile directory using platform-specific semantics.
 *
 * @param aDirectory  The profile directory to lock.
 * @param aLockObject An opaque lock object. The directory will remain locked
 *                    as long as the XPCOM reference is held.
 */
XRE_API(nsresult,
        XRE_LockProfileDirectory, (nsILocalFile* aDirectory,
                                   nsISupports* *aLockObject))

/**
 * Initialize libXUL for embedding purposes.
 *
 * @param aLibXULDirectory   The directory in which the libXUL shared library
 *                           was found.
 * @param aAppDirectory      The directory in which the application components
 *                           and resources can be found. This will map to
 *                           the NS_OS_CURRENT_PROCESS_DIR directory service
 *                           key.
 * @param aAppDirProvider    A directory provider for the application. This
 *                           provider will be aggregated by a libxul provider
 *                           which will provide the base required GRE keys.
 * @param aStaticComponents  Static components provided by the embedding
 *                           application. This should *not* include the
 *                           components from XRE_GetStaticComponents. May be
 *                           null if there are no static components.
 * @param aStaticComponentCount the number of static components in
 *                           aStaticComponents
 *
 * @note This function must be called from the "main" thread.
 *
 * @note At the present time, this function may only be called once in
 * a given process. Use XRE_TermEmbedding to clean up and free
 * resources allocated by XRE_InitEmbedding.
 */

XRE_API(nsresult,
        XRE_InitEmbedding, (nsILocalFile *aLibXULDirectory,
                            nsILocalFile *aAppDirectory,
                            nsIDirectoryServiceProvider *aAppDirProvider,
                            nsStaticModuleInfo const *aStaticComponents,
                            PRUint32 aStaticComponentCount))

/**
 * Fire notifications to inform the toolkit about a new profile. This
 * method should be called after XRE_InitEmbedding if the embedder
 * wishes to run with a profile. Normally the embedder should call
 * XRE_LockProfileDirectory to lock the directory before calling this
 * method.
 *
 * @note There are two possibilities for selecting a profile:
 *
 * 1) Select the profile before calling XRE_InitEmbedding. The aAppDirProvider
 *    object passed to XRE_InitEmbedding should provide the
 *    NS_APP_USER_PROFILE_50_DIR key, and may also provide the following keys:
 *    - NS_APP_USER_PROFILE_LOCAL_50_DIR
 *    - NS_APP_PROFILE_DIR_STARTUP
 *    - NS_APP_PROFILE_LOCAL_DIR_STARTUP
 *    In this scenario XRE_NotifyProfile should be called immediately after
 *    XRE_InitEmbedding. Component registration information will be stored in
 *    the profile and JS components may be stored in the fastload cache.
 *
 * 2) Select a profile some time after calling XRE_InitEmbedding. In this case
 *    the embedder must install a directory service provider which provides
 *    NS_APP_USER_PROFILE_50_DIR and optionally
 *    NS_APP_USER_PROFILE_LOCAL_50_DIR. Component registration information
 *    will be stored in the application directory and JS components will not
 *    fastload.
 */
XRE_API(void,
        XRE_NotifyProfile, ())

/**
 * Terminate embedding started with XRE_InitEmbedding or XRE_InitEmbedding2
 */
XRE_API(void,
        XRE_TermEmbedding, ())

/**
 * Create a new nsXREAppData structure from an application.ini file.
 *
 * @param aINIFile The application.ini file to parse.
 * @param aAppData A newly-allocated nsXREAppData structure. The caller is
 *                 responsible for freeing this structure using
 *                 XRE_FreeAppData.
 */
XRE_API(nsresult,
        XRE_CreateAppData, (nsILocalFile* aINIFile,
                            nsXREAppData **aAppData))

/**
 * Parse an INI file (application.ini or override.ini) into an existing
 * nsXREAppData structure.
 *
 * @param aINIFile The INI file to parse
 * @param aAppData The nsXREAppData structure to fill.
 */
XRE_API(nsresult,
        XRE_ParseAppData, (nsILocalFile* aINIFile,
                           nsXREAppData *aAppData))

/**
 * Free a nsXREAppData structure that was allocated with XRE_CreateAppData.
 */
XRE_API(void,
        XRE_FreeAppData, (nsXREAppData *aAppData))

enum GeckoProcessType {
  GeckoProcessType_Default = 0,

  GeckoProcessType_Plugin,
  GeckoProcessType_Content,
  GeckoProcessType_Jetpack,

  GeckoProcessType_IPDLUnitTest,

  GeckoProcessType_End,
  GeckoProcessType_Invalid = GeckoProcessType_End
};

static const char* const kGeckoProcessTypeString[] = {
  "default",
  "plugin",
  "tab",
  "jetpack",
  "ipdlunittest"
};

PR_STATIC_ASSERT(sizeof(kGeckoProcessTypeString) /
                 sizeof(kGeckoProcessTypeString[0]) ==
                 GeckoProcessType_End);


XRE_API(const char*,
        XRE_ChildProcessTypeToString, (GeckoProcessType aProcessType))

XRE_API(GeckoProcessType,
        XRE_StringToChildProcessType, (const char* aProcessTypeString))

#if defined(MOZ_CRASHREPORTER)
// Used in the "master" parent process hosting the crash server
XRE_API(PRBool,
        XRE_TakeMinidumpForChild, (PRUint32 aChildPid, nsILocalFile** aDump))

// Used in child processes.
XRE_API(PRBool,
        XRE_SetRemoteExceptionHandler, (const char* aPipe))
#endif

XRE_API(nsresult,
        XRE_InitChildProcess, (int aArgc,
                               char* aArgv[],
                               GeckoProcessType aProcess))

XRE_API(GeckoProcessType,
        XRE_GetProcessType, ())

typedef void (*MainFunction)(void* aData);

XRE_API(nsresult,
        XRE_InitParentProcess, (int aArgc,
                                char* aArgv[],
                                MainFunction aMainFunction,
                                void* aMainFunctionExtraData))

XRE_API(int,
        XRE_RunIPDLTest, (int aArgc,
                          char* aArgv[]))

XRE_API(nsresult,
        XRE_RunAppShell, ())

XRE_API(nsresult,
        XRE_InitCommandLine, (int aArgc, char* aArgv[]))

XRE_API(nsresult,
        XRE_DeinitCommandLine, ())

class MessageLoop;

XRE_API(void,
        XRE_ShutdownChildProcess, ())

XRE_API(MessageLoop*,
        XRE_GetIOMessageLoop, ())

struct JSContext;
struct JSString;

XRE_API(bool,
        XRE_SendTestShellCommand, (JSContext* aCx,
                                   JSString* aCommand,
                                   void* aCallback))
struct JSObject;

XRE_API(bool,
        XRE_GetChildGlobalObject, (JSContext* aCx,
                                   JSObject** globalp))

XRE_API(bool,
        XRE_ShutdownTestShell, ())

XRE_API(void,
        XRE_InstallX11ErrorHandler, ())
#endif // _nsXULAppAPI_h__