/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #ifndef nsIContent_h___ #define nsIContent_h___ #include "nsCOMPtr.h" // for already_AddRefed #include "nsStringGlue.h" #include "nsCaseTreatment.h" #include "nsChangeHint.h" #include "nsINode.h" #include "nsIDocument.h" // for IsInHTMLDocument #include "nsDOMMemoryReporter.h" // Forward declarations class nsIAtom; class nsIDOMEvent; class nsIContent; class nsEventListenerManager; class nsIURI; class nsRuleWalker; class nsAttrValue; class nsAttrName; class nsTextFragment; class nsIDocShell; class nsIFrame; class nsISMILAttr; class nsIDOMCSSStyleDeclaration; namespace mozilla { namespace css { class StyleRule; } } enum nsLinkState { eLinkState_Unknown = 0, eLinkState_Unvisited = 1, eLinkState_Visited = 2, eLinkState_NotLink = 3 }; // IID for the nsIContent interface #define NS_ICONTENT_IID \ { 0x3128b3a0, 0xb609, 0x44e3, \ { 0xad, 0x91, 0xdc, 0xf1, 0x4a, 0x3f, 0xf6, 0xa0 } } /** * A node of content in a document's content model. This interface * is supported by all content objects. */ class nsIContent : public nsINode { public: #ifdef MOZILLA_INTERNAL_API // If you're using the external API, the only thing you can know about // nsIContent is that it exists with an IID nsIContent(already_AddRefed aNodeInfo) : nsINode(aNodeInfo), mPrimaryFrame(nsnull) { NS_ASSERTION(mNodeInfo, "No nsINodeInfo passed to nsIContent, PREPARE TO CRASH!!!"); } #endif // MOZILLA_INTERNAL_API NS_DECLARE_STATIC_IID_ACCESSOR(NS_ICONTENT_IID) NS_DECL_AND_IMPL_DOM_MEMORY_REPORTER_SIZEOF(nsIContent, nsINode); /** * Bind this content node to a tree. If this method throws, the caller must * call UnbindFromTree() on the node. In the typical case of a node being * appended to a parent, this will be called after the node has been added to * the parent's child list and before nsIDocumentObserver notifications for * the addition are dispatched. * @param aDocument The new document for the content node. Must match the * current document of aParent, if aParent is not null. * May not be null if aParent is null. * @param aParent The new parent for the content node. May be null if the * node is being bound as a direct child of the document. * @param aBindingParent The new binding parent for the content node. * This is allowed to be null. In that case, the * binding parent of aParent, if any, will be used. * @param aCompileEventHandlers whether to initialize the event handlers in * the document (used by nsXULElement) * @note either aDocument or aParent must be non-null. If both are null, * this method _will_ crash. * @note This method must not be called by consumers of nsIContent on a node * that is already bound to a tree. Call UnbindFromTree first. * @note This method will handle rebinding descendants appropriately (eg * changing their binding parent as needed). * @note This method does not add the content node to aParent's child list * @throws NS_ERROR_OUT_OF_MEMORY if that happens */ virtual nsresult BindToTree(nsIDocument* aDocument, nsIContent* aParent, nsIContent* aBindingParent, bool aCompileEventHandlers) = 0; /** * Unbind this content node from a tree. This will set its current document * and binding parent to null. In the typical case of a node being removed * from a parent, this will be called after it has been removed from the * parent's child list and after the nsIDocumentObserver notifications for * the removal have been dispatched. * @param aDeep Whether to recursively unbind the entire subtree rooted at * this node. The only time false should be passed is when the * parent node of the content is being destroyed. * @param aNullParent Whether to null out the parent pointer as well. This * is usually desirable. This argument should only be false while * recursively calling UnbindFromTree when a subtree is detached. * @note This method is safe to call on nodes that are not bound to a tree. */ virtual void UnbindFromTree(bool aDeep = true, bool aNullParent = true) = 0; /** * DEPRECATED - Use GetCurrentDoc or GetOwnerDoc. * Get the document for this content. * @return the document */ nsIDocument *GetDocument() const { return GetCurrentDoc(); } enum { /** * All XBL flattened tree children of the node, as well as :before and * :after anonymous content and native anonymous children. * * @note the result children order is * 1. :before generated node * 2. XBL flattened tree children of this node * 3. native anonymous nodes * 4. :after generated node */ eAllChildren = 0, /** * All XBL explicit children of the node (see * http://www.w3.org/TR/xbl/#explicit3 ), as well as :before and :after * anonymous content and native anonymous children. * * @note the result children order is * 1. :before generated node * 2. XBL explicit children of the node * 3. native anonymous nodes * 4. :after generated node */ eAllButXBL = 1, /** * Skip native anonymous content created for placeholder of HTML input, * used in conjunction with eAllChildren or eAllButXBL. */ eSkipPlaceholderContent = 2 }; /** * Return either the XBL explicit children of the node or the XBL flattened * tree children of the node, depending on the filter, as well as * native anonymous children. * * @note calling this method with eAllButXBL will return children that are * also in the eAllButXBL and eAllChildren child lists of other descendants * of this node in the tree, but those other nodes cannot be reached from the * eAllButXBL child list. */ virtual already_AddRefed GetChildren(PRUint32 aFilter) = 0; /** * Get whether this content is C++-generated anonymous content * @see nsIAnonymousContentCreator * @return whether this content is anonymous */ bool IsRootOfNativeAnonymousSubtree() const { NS_ASSERTION(!HasFlag(NODE_IS_NATIVE_ANONYMOUS_ROOT) || (HasFlag(NODE_IS_ANONYMOUS) && HasFlag(NODE_IS_IN_ANONYMOUS_SUBTREE)), "Some flags seem to be missing!"); return HasFlag(NODE_IS_NATIVE_ANONYMOUS_ROOT); } /** * Makes this content anonymous * @see nsIAnonymousContentCreator */ void SetNativeAnonymous() { SetFlags(NODE_IS_ANONYMOUS | NODE_IS_IN_ANONYMOUS_SUBTREE | NODE_IS_NATIVE_ANONYMOUS_ROOT); } /** * Returns |this| if it is not native anonymous, otherwise * first non native anonymous ancestor. */ virtual nsIContent* FindFirstNonNativeAnonymous() const; /** * Returns true if and only if this node has a parent, but is not in * its parent's child list. */ bool IsRootOfAnonymousSubtree() const { NS_ASSERTION(!IsRootOfNativeAnonymousSubtree() || (GetParent() && GetBindingParent() == GetParent()), "root of native anonymous subtree must have parent equal " "to binding parent"); NS_ASSERTION(!GetParent() || ((GetBindingParent() == GetParent()) == HasFlag(NODE_IS_ANONYMOUS)) || // Unfortunately default content for XBL insertion points is // anonymous content that is bound with the parent of the // insertion point as the parent but the bound element for the // binding as the binding parent. So we have to complicate // the assert a bit here. (GetBindingParent() && (GetBindingParent() == GetParent()->GetBindingParent()) == HasFlag(NODE_IS_ANONYMOUS)), "For nodes with parent, flag and GetBindingParent() check " "should match"); return HasFlag(NODE_IS_ANONYMOUS); } /** * Returns true if there is NOT a path through child lists * from the top of this node's parent chain back to this node or * if the node is in native anonymous subtree without a parent. */ bool IsInAnonymousSubtree() const { NS_ASSERTION(!IsInNativeAnonymousSubtree() || GetBindingParent() || !GetParent(), "must have binding parent when in native anonymous subtree with a parent node"); return IsInNativeAnonymousSubtree() || GetBindingParent() != nsnull; } /** * Return true iff this node is in an HTML document (in the HTML5 sense of * the term, i.e. not in an XHTML/XML document). */ inline bool IsInHTMLDocument() const { return OwnerDoc()->IsHTML(); } /** * Get the namespace that this element's tag is defined in * @return the namespace */ PRInt32 GetNameSpaceID() const { return mNodeInfo->NamespaceID(); } /** * Get the tag for this element. This will always return a non-null * atom pointer (as implied by the naming of the method). */ nsIAtom *Tag() const { return mNodeInfo->NameAtom(); } /** * Get the NodeInfo for this element * @return the nodes node info */ nsINodeInfo *NodeInfo() const { return mNodeInfo; } inline bool IsInNamespace(PRInt32 aNamespace) const { return mNodeInfo->NamespaceID() == aNamespace; } inline bool IsHTML() const { return IsInNamespace(kNameSpaceID_XHTML); } inline bool IsHTML(nsIAtom* aTag) const { return mNodeInfo->Equals(aTag, kNameSpaceID_XHTML); } inline bool IsSVG() const { /* Some things in the SVG namespace are not in fact SVG elements */ return IsNodeOfType(eSVG); } inline bool IsXUL() const { return IsInNamespace(kNameSpaceID_XUL); } inline bool IsMathML() const { return IsInNamespace(kNameSpaceID_MathML); } /** * Returns an atom holding the name of the attribute of type ID on * this content node (if applicable). Returns null for non-element * content nodes. */ virtual nsIAtom *GetIDAttributeName() const = 0; /** * Normalizes an attribute name and returns it as a nodeinfo if an attribute * with that name exists. This method is intended for character case * conversion if the content object is case insensitive (e.g. HTML). Returns * the nodeinfo of the attribute with the specified name if one exists or * null otherwise. * * @param aStr the unparsed attribute string * @return the node info. May be nsnull. */ virtual already_AddRefed GetExistingAttrNameFromQName(const nsAString& aStr) const = 0; /** * Set attribute values. All attribute values are assumed to have a * canonical string representation that can be used for these * methods. The SetAttr method is assumed to perform a translation * of the canonical form into the underlying content specific * form. * * @param aNameSpaceID the namespace of the attribute * @param aName the name of the attribute * @param aValue the value to set * @param aNotify specifies how whether or not the document should be * notified of the attribute change. */ nsresult SetAttr(PRInt32 aNameSpaceID, nsIAtom* aName, const nsAString& aValue, bool aNotify) { return SetAttr(aNameSpaceID, aName, nsnull, aValue, aNotify); } /** * Set attribute values. All attribute values are assumed to have a * canonical String representation that can be used for these * methods. The SetAttr method is assumed to perform a translation * of the canonical form into the underlying content specific * form. * * @param aNameSpaceID the namespace of the attribute * @param aName the name of the attribute * @param aPrefix the prefix of the attribute * @param aValue the value to set * @param aNotify specifies how whether or not the document should be * notified of the attribute change. */ virtual nsresult SetAttr(PRInt32 aNameSpaceID, nsIAtom* aName, nsIAtom* aPrefix, const nsAString& aValue, bool aNotify) = 0; /** * Get the current value of the attribute. This returns a form that is * suitable for passing back into SetAttr. * * @param aNameSpaceID the namespace of the attr * @param aName the name of the attr * @param aResult the value (may legitimately be the empty string) [OUT] * @returns true if the attribute was set (even when set to empty string) * false when not set. */ virtual bool GetAttr(PRInt32 aNameSpaceID, nsIAtom* aName, nsAString& aResult) const = 0; /** * Determine if an attribute has been set (empty string or otherwise). * * @param aNameSpaceId the namespace id of the attribute * @param aAttr the attribute name * @return whether an attribute exists */ virtual bool HasAttr(PRInt32 aNameSpaceID, nsIAtom* aName) const = 0; /** * Test whether this content node's given attribute has the given value. If * the attribute is not set at all, this will return false. * * @param aNameSpaceID The namespace ID of the attribute. Must not * be kNameSpaceID_Unknown. * @param aName The name atom of the attribute. Must not be null. * @param aValue The value to compare to. * @param aCaseSensitive Whether to do a case-sensitive compare on the value. */ virtual bool AttrValueIs(PRInt32 aNameSpaceID, nsIAtom* aName, const nsAString& aValue, nsCaseTreatment aCaseSensitive) const { return false; } /** * Test whether this content node's given attribute has the given value. If * the attribute is not set at all, this will return false. * * @param aNameSpaceID The namespace ID of the attribute. Must not * be kNameSpaceID_Unknown. * @param aName The name atom of the attribute. Must not be null. * @param aValue The value to compare to. Must not be null. * @param aCaseSensitive Whether to do a case-sensitive compare on the value. */ virtual bool AttrValueIs(PRInt32 aNameSpaceID, nsIAtom* aName, nsIAtom* aValue, nsCaseTreatment aCaseSensitive) const { return false; } enum { ATTR_MISSING = -1, ATTR_VALUE_NO_MATCH = -2 }; /** * Check whether this content node's given attribute has one of a given * list of values. If there is a match, we return the index in the list * of the first matching value. If there was no attribute at all, then * we return ATTR_MISSING. If there was an attribute but it didn't * match, we return ATTR_VALUE_NO_MATCH. A non-negative result always * indicates a match. * * @param aNameSpaceID The namespace ID of the attribute. Must not * be kNameSpaceID_Unknown. * @param aName The name atom of the attribute. Must not be null. * @param aValues a NULL-terminated array of pointers to atom values to test * against. * @param aCaseSensitive Whether to do a case-sensitive compare on the values. * @return ATTR_MISSING, ATTR_VALUE_NO_MATCH or the non-negative index * indicating the first value of aValues that matched */ typedef nsIAtom* const* const AttrValuesArray; virtual PRInt32 FindAttrValueIn(PRInt32 aNameSpaceID, nsIAtom* aName, AttrValuesArray* aValues, nsCaseTreatment aCaseSensitive) const { return ATTR_MISSING; } /** * Remove an attribute so that it is no longer explicitly specified. * * @param aNameSpaceID the namespace id of the attribute * @param aAttr the name of the attribute to unset * @param aNotify specifies whether or not the document should be * notified of the attribute change */ virtual nsresult UnsetAttr(PRInt32 aNameSpaceID, nsIAtom* aAttr, bool aNotify) = 0; /** * Get the namespace / name / prefix of a given attribute. * * @param aIndex the index of the attribute name * @returns The name at the given index, or null if the index is * out-of-bounds. * @note The document returned by NodeInfo()->GetDocument() (if one is * present) is *not* necessarily the owner document of the element. * @note The pointer returned by this function is only valid until the * next call of either GetAttrNameAt or SetAttr on the element. */ virtual const nsAttrName* GetAttrNameAt(PRUint32 aIndex) const = 0; /** * Get the number of all specified attributes. * * @return the number of attributes */ virtual PRUint32 GetAttrCount() const = 0; /** * Get direct access (but read only) to the text in the text content. * NOTE: For elements this is *not* the concatenation of all text children, * it is simply null; */ virtual const nsTextFragment *GetText() = 0; /** * Get the length of the text content. * NOTE: This should not be called on elements. */ virtual PRUint32 TextLength() = 0; /** * Set the text to the given value. If aNotify is true then * the document is notified of the content change. * NOTE: For elements this always ASSERTS and returns NS_ERROR_FAILURE */ virtual nsresult SetText(const PRUnichar* aBuffer, PRUint32 aLength, bool aNotify) = 0; /** * Append the given value to the current text. If aNotify is true then * the document is notified of the content change. * NOTE: For elements this always ASSERTS and returns NS_ERROR_FAILURE */ virtual nsresult AppendText(const PRUnichar* aBuffer, PRUint32 aLength, bool aNotify) = 0; /** * Set the text to the given value. If aNotify is true then * the document is notified of the content change. * NOTE: For elements this always asserts and returns NS_ERROR_FAILURE */ nsresult SetText(const nsAString& aStr, bool aNotify) { return SetText(aStr.BeginReading(), aStr.Length(), aNotify); } /** * Query method to see if the frame is nothing but whitespace * NOTE: Always returns false for elements */ virtual bool TextIsOnlyWhitespace() = 0; /** * Append the text content to aResult. * NOTE: This asserts and returns for elements */ virtual void AppendTextTo(nsAString& aResult) = 0; /** * Check if this content is focusable and in the current tab order. * Note: most callers should use nsIFrame::IsFocusable() instead as it * checks visibility and other layout factors as well. * Tabbable is indicated by a nonnegative tabindex & is a subset of focusable. * For example, only the selected radio button in a group is in the * tab order, unless the radio group has no selection in which case * all of the visible, non-disabled radio buttons in the group are * in the tab order. On the other hand, all of the visible, non-disabled * radio buttons are always focusable via clicking or script. * Also, depending on either the accessibility.tabfocus pref or * a system setting (nowadays: Full keyboard access, mac only) * some widgets may be focusable but removed from the tab order. * @param [inout, optional] aTabIndex the computed tab index * In: default tabindex for element (-1 nonfocusable, == 0 focusable) * Out: computed tabindex * @param [optional] aTabIndex the computed tab index * < 0 if not tabbable * == 0 if in normal tab order * > 0 can be tabbed to in the order specified by this value * @return whether the content is focusable via mouse, kbd or script. */ virtual bool IsFocusable(PRInt32 *aTabIndex = nsnull, bool aWithMouse = false) { if (aTabIndex) *aTabIndex = -1; // Default, not tabbable return false; } /** * The method focuses (or activates) element that accesskey is bound to. It is * called when accesskey is activated. * * @param aKeyCausesActivation - if true then element should be activated * @param aIsTrustedEvent - if true then event that is cause of accesskey * execution is trusted. */ virtual void PerformAccesskey(bool aKeyCausesActivation, bool aIsTrustedEvent) { } /* * Get desired IME state for the content. * * @return The desired IME status for the content. * This is a combination of IME_STATUS_* flags, * controlling what happens to IME when the content takes focus. * If this is IME_STATUS_NONE, IME remains in its current state. * IME_STATUS_ENABLE and IME_STATUS_DISABLE must not be set * together; likewise IME_STATUS_OPEN and IME_STATUS_CLOSE must * not be set together. * If you return IME_STATUS_DISABLE, you should not set the * OPEN or CLOSE flag; that way, when IME is next enabled, * the previous OPEN/CLOSE state will be restored (unless the newly * focused content specifies the OPEN/CLOSE state by setting the OPEN * or CLOSE flag with the ENABLE flag). * IME_STATUS_PASSWORD should be returned only from password editor, * this value has a special meaning. It is used as alternative of * IME_STATUS_DISABLED. * IME_STATUS_PLUGIN should be returned only when plug-in has focus. * When a plug-in is focused content, we should send native events * directly. Because we don't process some native events, but they may * be needed by the plug-in. */ enum { IME_STATUS_NONE = 0x0000, IME_STATUS_ENABLE = 0x0001, IME_STATUS_DISABLE = 0x0002, IME_STATUS_PASSWORD = 0x0004, IME_STATUS_PLUGIN = 0x0008, IME_STATUS_OPEN = 0x0010, IME_STATUS_CLOSE = 0x0020 }; enum { IME_STATUS_MASK_ENABLED = IME_STATUS_ENABLE | IME_STATUS_DISABLE | IME_STATUS_PASSWORD | IME_STATUS_PLUGIN, IME_STATUS_MASK_OPENED = IME_STATUS_OPEN | IME_STATUS_CLOSE }; virtual PRUint32 GetDesiredIMEState(); /** * Gets content node with the binding (or native code, possibly on the * frame) responsible for our construction (and existence). Used by * anonymous content (both XBL-generated and native-anonymous). * * null for all explicit content (i.e., content reachable from the top * of its GetParent() chain via child lists). * * @return the binding parent */ virtual nsIContent *GetBindingParent() const = 0; /** * Returns the content node that is the parent of this node in the flattened * tree. * * @return the flattened tree parent */ nsIContent *GetFlattenedTreeParent() const; /** * API to check if this is a link that's traversed in response to user input * (e.g. a click event). Specializations for HTML/SVG/generic XML allow for * different types of link in different types of content. * * @param aURI Required out param. If this content is a link, a new nsIURI * set to this link's URI will be passed out. * * @note The out param, aURI, is guaranteed to be set to a non-null pointer * when the return value is true. * * XXXjwatt: IMO IsInteractiveLink would be a better name. */ virtual bool IsLink(nsIURI** aURI) const = 0; /** * Get the cached state of the link. If the state is unknown, * return eLinkState_Unknown. * * @return The cached link state of the link. */ virtual nsLinkState GetLinkState() const { return eLinkState_NotLink; } /** * Get a pointer to the full href URI (fully resolved and canonicalized, * since it's an nsIURI object) for link elements. * * @return A pointer to the URI or null if the element is not a link or it * has no HREF attribute. */ virtual already_AddRefed GetHrefURI() const { return nsnull; } /** * This method is called when the parser finishes creating the element. This * particularly means that it has done everything you would expect it to have * done after it encounters the > at the end of the tag (for HTML or XML). * This includes setting the attributes, setting the document / form, and * placing the element into the tree at its proper place. * * For container elements, this is called *before* any of the children are * created or added into the tree. * * NOTE: this is currently only called for input and button, in the HTML * content sink. If you want to call it on your element, modify the content * sink of your choice to do so. This is an efficiency measure. * * If you also need to determine whether the parser is the one creating your * element (through createElement() or cloneNode() generally) then add a * PRUint32 aFromParser to the NS_NewXXX() constructor for your element and * have the parser pass the appropriate flags. See nsHTMLInputElement.cpp and * nsHTMLContentSink::MakeContentObject(). * * DO NOT USE THIS METHOD to get around the fact that it's hard to deal with * attributes dynamically. If you make attributes affect your element from * this method, it will only happen on initialization and JavaScript will not * be able to create elements (which requires them to first create the * element and then call setAttribute() directly, at which point * DoneCreatingElement() has already been called and is out of the picture). */ virtual void DoneCreatingElement() { } /** * This method is called when the parser begins creating the element's * children, if any are present. * * This is only called for XTF elements currently. */ virtual void BeginAddingChildren() { } /** * This method is called when the parser finishes creating the element's children, * if any are present. * * NOTE: this is currently only called for textarea, select, applet, and * object elements in the HTML content sink. If you want * to call it on your element, modify the content sink of your * choice to do so. This is an efficiency measure. * * If you also need to determine whether the parser is the one creating your * element (through createElement() or cloneNode() generally) then add a * boolean aFromParser to the NS_NewXXX() constructor for your element and * have the parser pass true. See nsHTMLInputElement.cpp and * nsHTMLContentSink::MakeContentObject(). * * @param aHaveNotified Whether there has been a * ContentInserted/ContentAppended notification for this content node * yet. */ virtual void DoneAddingChildren(bool aHaveNotified) { } /** * For HTML textarea, select, applet, and object elements, returns * true if all children have been added OR if the element was not * created by the parser. Returns true for all other elements. * @returns false if the element was created by the parser and * it is an HTML textarea, select, applet, or object * element and not all children have been added. * @returns true otherwise. */ virtual bool IsDoneAddingChildren() { return true; } /** * Get the ID of this content node (the atom corresponding to the * value of the null-namespace attribute whose name is given by * GetIDAttributeName(). This may be null if there is no ID. */ nsIAtom* GetID() const { if (HasID()) { return DoGetID(); } return nsnull; } /** * Get the class list of this content node (this corresponds to the * value of the null-namespace attribute whose name is given by * GetClassAttributeName()). This may be null if there are no * classes, but that's not guaranteed. */ const nsAttrValue* GetClasses() const { if (HasFlag(NODE_MAY_HAVE_CLASS)) { return DoGetClasses(); } return nsnull; } /** * Walk aRuleWalker over the content style rules (presentational * hint rules) for this content node. */ NS_IMETHOD WalkContentStyleRules(nsRuleWalker* aRuleWalker) = 0; /** * Get the inline style rule, if any, for this content node */ virtual mozilla::css::StyleRule* GetInlineStyleRule() = 0; /** * Set the inline style rule for this node. This will send an * appropriate AttributeChanged notification if aNotify is true. */ NS_IMETHOD SetInlineStyleRule(mozilla::css::StyleRule* aStyleRule, bool aNotify) = 0; /** * Is the attribute named stored in the mapped attributes? * * // XXXbz we use this method in HasAttributeDependentStyle, so svg * returns true here even though it stores nothing in the mapped * attributes. */ NS_IMETHOD_(bool) IsAttributeMapped(const nsIAtom* aAttribute) const = 0; /** * Get a hint that tells the style system what to do when * an attribute on this node changes, if something needs to happen * in response to the change *other* than the result of what is * mapped into style data via any type of style rule. */ virtual nsChangeHint GetAttributeChangeHint(const nsIAtom* aAttribute, PRInt32 aModType) const = 0; /** * Returns an atom holding the name of the "class" attribute on this * content node (if applicable). Returns null if there is no * "class" attribute for this type of content node. */ virtual nsIAtom *GetClassAttributeName() const = 0; /** * Should be called when the node can become editable or when it can stop * being editable (for example when its contentEditable attribute changes, * when it is moved into an editable parent, ...). If aNotify is true and * the node is an element, this will notify the state change. */ virtual void UpdateEditableState(bool aNotify); /** * Destroy this node and its children. Ideally this shouldn't be needed * but for now we need to do it to break cycles. */ virtual void DestroyContent() = 0; /** * Saves the form state of this node and its children. */ virtual void SaveSubtreeState() = 0; /** * Getter and setter for our primary frame pointer. This is the frame that * is most closely associated with the content. A frame is more closely * associated with the content than another frame if the one frame contains * directly or indirectly the other frame (e.g., when a frame is scrolled * there is a scroll frame that contains the frame being scrolled). This * frame is always the first continuation. * * In the case of absolutely positioned elements and floated elements, this * frame is the out of flow frame, not the placeholder. */ nsIFrame* GetPrimaryFrame() const { return mPrimaryFrame; } void SetPrimaryFrame(nsIFrame* aFrame) { NS_PRECONDITION(!aFrame || !mPrimaryFrame || aFrame == mPrimaryFrame, "Losing track of existing primary frame"); mPrimaryFrame = aFrame; } /* * Returns a new nsISMILAttr that allows the caller to animate the given * attribute on this element. * * The CALLER OWNS the result and is responsible for deleting it. */ virtual nsISMILAttr* GetAnimatedAttr(PRInt32 aNamespaceID, nsIAtom* aName) = 0; /** * Get the SMIL override style for this content node. This is a style * declaration that is applied *after* the inline style, and it can be used * e.g. to store animated style values. * * Note: This method is analogous to the 'GetStyle' method in * nsGenericHTMLElement and nsStyledElement. */ virtual nsIDOMCSSStyleDeclaration* GetSMILOverrideStyle() = 0; /** * Get the SMIL override style rule for this content node. If the rule * hasn't been created (or if this nsIContent object doesn't support SMIL * override style), this method simply returns null. */ virtual mozilla::css::StyleRule* GetSMILOverrideStyleRule() = 0; /** * Set the SMIL override style rule for this node. If aNotify is true, this * method will notify the document's pres context, so that the style changes * will be noticed. */ virtual nsresult SetSMILOverrideStyleRule(mozilla::css::StyleRule* aStyleRule, bool aNotify) = 0; nsresult LookupNamespaceURI(const nsAString& aNamespacePrefix, nsAString& aNamespaceURI) const; /** * If this content has independent selection, e.g., if this is input field * or textarea, this return TRUE. Otherwise, false. */ bool HasIndependentSelection(); /** * If the content is a part of HTML editor, this returns editing * host content. When the content is in designMode, this returns its body * element. Also, when the content isn't editable, this returns null. */ nsIContent* GetEditingHost(); /** * Determing language. Look at the nearest ancestor element that has a lang * attribute in the XML namespace or is an HTML element and has a lang in * no namespace attribute. */ void GetLang(nsAString& aResult) const { for (const nsIContent* content = this; content; content = content->GetParent()) { if (content->GetAttrCount() > 0) { // xml:lang has precedence over lang on HTML elements (see // XHTML1 section C.7). bool hasAttr = content->GetAttr(kNameSpaceID_XML, nsGkAtoms::lang, aResult); if (!hasAttr && content->IsHTML()) { hasAttr = content->GetAttr(kNameSpaceID_None, nsGkAtoms::lang, aResult); } NS_ASSERTION(hasAttr || aResult.IsEmpty(), "GetAttr that returns false should not make string non-empty"); if (hasAttr) { return; } } } } // Overloaded from nsINode virtual already_AddRefed GetBaseURI() const; virtual nsresult PreHandleEvent(nsEventChainPreVisitor& aVisitor); protected: /** * Hook for implementing GetID. This is guaranteed to only be * called if HasID() is true. */ virtual nsIAtom* DoGetID() const = 0; private: /** * Hook for implementing GetClasses. This is guaranteed to only be * called if the NODE_MAY_HAVE_CLASS flag is set. */ virtual const nsAttrValue* DoGetClasses() const = 0; /** * Pointer to our primary frame. Might be null. */ nsIFrame* mPrimaryFrame; public: #ifdef DEBUG /** * List the content (and anything it contains) out to the given * file stream. Use aIndent as the base indent during formatting. */ virtual void List(FILE* out = stdout, PRInt32 aIndent = 0) const = 0; /** * Dump the content (and anything it contains) out to the given * file stream. Use aIndent as the base indent during formatting. */ virtual void DumpContent(FILE* out = stdout, PRInt32 aIndent = 0, bool aDumpAll = true) const = 0; #endif enum ETabFocusType { //eTabFocus_textControlsMask = (1<<0), // unused - textboxes always tabbable eTabFocus_formElementsMask = (1<<1), // non-text form elements eTabFocus_linksMask = (1<<2), // links eTabFocus_any = 1 + (1<<1) + (1<<2) // everything that can be focused }; // Tab focus model bit field: static PRInt32 sTabFocusModel; // accessibility.tabfocus_applies_to_xul pref - if it is set to true, // the tabfocus bit field applies to xul elements. static bool sTabFocusModelAppliesToXUL; }; NS_DEFINE_STATIC_IID_ACCESSOR(nsIContent, NS_ICONTENT_IID) #endif /* nsIContent_h___ */