/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Bill Law law@netscape.com * Robert Strong robert.bugzilla@gmail.com * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "nsNativeAppSupportBase.h" #include "nsNativeAppSupportWin.h" #include "nsAppRunner.h" #include "nsXULAppAPI.h" #include "nsString.h" #include "nsIBrowserDOMWindow.h" #include "nsICommandLineRunner.h" #include "nsCOMPtr.h" #include "nsXPIDLString.h" #include "nsIComponentManager.h" #include "nsIServiceManager.h" #include "nsIDOMChromeWindow.h" #include "nsXPCOM.h" #include "nsISupportsPrimitives.h" #include "nsISupportsArray.h" #include "nsIWindowWatcher.h" #include "nsPIDOMWindow.h" #include "nsIDocShell.h" #include "nsIDocShellTreeItem.h" #include "nsIBaseWindow.h" #include "nsIWidget.h" #include "nsIAppShellService.h" #include "nsIXULWindow.h" #include "nsIInterfaceRequestor.h" #include "nsIInterfaceRequestorUtils.h" #include "nsIPromptService.h" #include "nsNetCID.h" #include "nsNetUtil.h" #include "nsIObserver.h" #include "nsIObserverService.h" #include "nsIDOMLocation.h" #include "nsIJSContextStack.h" #include "nsIWebNavigation.h" #include "nsIWindowMediator.h" #include "nsNativeCharsetUtils.h" #include "nsIAppStartup.h" #include #include #ifndef WINCE #include #endif #include #include #include #include #include static HWND hwndForDOMWindow( nsISupports * ); static nsresult GetMostRecentWindow(const PRUnichar* aType, nsIDOMWindowInternal** aWindow) { nsresult rv; nsCOMPtr med( do_GetService( NS_WINDOWMEDIATOR_CONTRACTID, &rv ) ); if ( NS_FAILED( rv ) ) return rv; if ( med ) return med->GetMostRecentWindow( aType, aWindow ); return NS_ERROR_FAILURE; } static void activateWindow( nsIDOMWindowInternal *win ) { // Try to get native window handle. HWND hwnd = hwndForDOMWindow( win ); if ( hwnd ) { #ifndef WINCE // Can't iconify windows on windows ce // Restore the window if it is minimized. if ( ::IsIconic( hwnd ) ) { ::ShowWindow( hwnd, SW_RESTORE ); } #endif // Use the OS call, if possible. ::SetForegroundWindow( hwnd ); } else { // Use internal method. win->Focus(); } } #ifdef DEBUG_law #undef MOZ_DEBUG_DDE #define MOZ_DEBUG_DDE 1 #endif // Simple Win32 mutex wrapper. struct Mutex { Mutex( const PRUnichar *name ) : mName( name ), mHandle( 0 ), mState( -1 ) { mHandle = CreateMutexW( 0, FALSE, mName.get() ); #if MOZ_DEBUG_DDE printf( "CreateMutex error = 0x%08X\n", (int)GetLastError() ); #endif } ~Mutex() { if ( mHandle ) { // Make sure we release it if we own it. Unlock(); BOOL rc = CloseHandle( mHandle ); #if MOZ_DEBUG_DDE if ( !rc ) { printf( "CloseHandle error = 0x%08X\n", (int)GetLastError() ); } #endif } } BOOL Lock( DWORD timeout ) { if ( mHandle ) { #if MOZ_DEBUG_DDE printf( "Waiting (%d msec) for DDE mutex...\n", (int)timeout ); #endif mState = WaitForSingleObject( mHandle, timeout ); #if MOZ_DEBUG_DDE printf( "...wait complete, result = 0x%08X, GetLastError=0x%08X\n", (int)mState, (int)::GetLastError() ); #endif return mState == WAIT_OBJECT_0 || mState == WAIT_ABANDONED; } else { return FALSE; } } void Unlock() { if ( mHandle && mState == WAIT_OBJECT_0 ) { #if MOZ_DEBUG_DDE printf( "Releasing DDE mutex\n" ); #endif ReleaseMutex( mHandle ); mState = -1; } } private: nsString mName; HANDLE mHandle; DWORD mState; }; /* DDE Notes * * This section describes the Win32 DDE service implementation for * Mozilla. DDE is used on Win32 platforms to communicate between * separate instances of mozilla.exe (or other Mozilla-based * executables), or, between the Win32 desktop shell and Mozilla. * * The first instance of Mozilla will become the "server" and * subsequent executables (and the shell) will use DDE to send * requests to that process. The requests are DDE "execute" requests * that pass the command line arguments. * * Mozilla registers the DDE application "Mozilla" and currently * supports only the "WWW_OpenURL" topic. This should be reasonably * compatible with applications that interfaced with Netscape * Communicator (and its predecessors?). Note that even that topic * may not be supported in a compatible fashion as the command-line * options for Mozilla are different than for Communiator. * * It is imperative that at most one instance of Mozilla execute in * "server mode" at any one time. The "native app support" in Mozilla * on Win32 ensures that only the server process performs XPCOM * initialization (that is not required for subsequent client processes * to communicate with the server process). * * To guarantee that only one server starts up, a Win32 "mutex" is used * to ensure only one process executes the server-detection code. That * code consists of initializing DDE and doing a DdeConnect to Mozilla's * application/topic. If that connection succeeds, then a server process * must be running already. * * Otherwise, no server has started. In that case, the current process * calls DdeNameService to register that application/topic. Only at that * point does the mutex get released. * * There are a couple of subtleties that one should be aware of: * * 1. It is imperative that DdeInitialize be called only after the mutex * lock has been obtained. The reason is that at shutdown, DDE * notifications go out to all initialized DDE processes. Thus, if * the mutex is owned by a terminating intance of Mozilla, then * calling DdeInitialize and then WaitForSingleObject will cause the * DdeUninitialize from the terminating process to "hang" until the * process waiting for the mutex times out (and can then service the * notification that the DDE server is terminating). So, don't mess * with the sequence of things in the startup/shutdown logic. * * 2. All mutex requests are made with a reasonably long timeout value and * are designed to "fail safe" (i.e., a timeout is treated as failure). * * 3. An attempt has been made to minimize the degree to which the main * Mozilla application logic needs to be aware of the DDE mechanisms * implemented herein. As a result, this module surfaces a very * large-grained interface, consisting of simple start/stop methods. * As a consequence, details of certain scenarios can be "lost." * Particularly, incoming DDE requests can arrive after this module * initiates the DDE server, but before Mozilla is initialized to the * point where those requests can be serviced (e.g., open a browser * window to a particular URL). Since the client process sends the * request early on, it may not be prepared to respond to that error. * Thus, such situations may fail silently. The design goal is that * they fail harmlessly. Refinements on this point will be made as * details emerge (and time permits). */ /* Update 2001 March * * A significant DDE bug in Windows is causing Mozilla to get wedged at * startup. This is detailed in Bugzill bug 53952 * (http://bugzilla.mozilla.org/show_bug.cgi?id=53952). * * To resolve this, we are using a new strategy: * o Use a "message window" to detect that Mozilla is already running and * to pass requests from a second instance back to the first; * o Run only as a "DDE server" (not as DDE client); this avoids the * problematic call to DDEConnect(). * * We still use the mutex semaphore to protect the code that detects * whether Mozilla is already running. */ /* Update 2007 January * * A change in behavior was implemented in July 2004 which made the * application on launch to add and on quit to remove the ddexec registry key. * See bug 246078. * Windows Vista has changed the methods used to set an application as default * and the new methods are incompatible with removing the ddeexec registry key. * See bug 353089. * * OS DDE Sequence: * 1. OS checks if the dde name is registered. * 2. If it is registered the OS sends a DDE request with the WWW_OpenURL topic * and the params as specified in the default value of the ddeexec registry * key for the verb (e.g. open). * 3. If it isn't registered the OS launches the executable defined in the * verb's (e.g. open) command registry key. * 4. If the ifexec registry key is not present the OS sends a DDE request with * the WWW_OpenURL topic and the params as specified in the default value of * the ddeexec registry key for the verb (e.g. open). * 5. If the ifexec registry key is present the OS sends a DDE request with the * WWW_OpenURL topic and the params as specified in the ifexec registry key * for the verb (e.g. open). * * Application DDE Sequence: * 1. If the application is running a DDE request is received with the * WWW_OpenURL topic and the params as specified in the default value of the * ddeexec registry key (e.g. "%1",,0,0,,,, where '%1' is the url to open) * for the verb (e.g. open). * 2. If the application is not running it is launched with the -requestPending * and the -url argument. * 2.1 If the application does not need to restart and the -requestPending * argument is present the accompanying url will not be used. Instead the * application will wait for the DDE message to open the url. * 2.2 If the application needs to restart the -requestPending argument is * removed from the arguments used to restart the application and the url * will be handled normally. * * Note: Due to a bug in IE the ifexec key should not be used (see bug 355650). */ class nsNativeAppSupportWin : public nsNativeAppSupportBase, public nsIObserver { public: NS_DECL_NSIOBSERVER NS_DECL_ISUPPORTS_INHERITED // Overrides of base implementation. NS_IMETHOD Start( PRBool *aResult ); NS_IMETHOD Stop( PRBool *aResult ); NS_IMETHOD Quit(); NS_IMETHOD Enable(); #ifndef WINCE // The "old" Start method (renamed). NS_IMETHOD StartDDE(); #endif // Utility function to handle a Win32-specific command line // option: "-console", which dynamically creates a Windows // console. void CheckConsole(); private: static void HandleCommandLine(const char* aCmdLineString, nsIFile* aWorkingDir, PRUint32 aState); #ifndef WINCE static HDDEDATA CALLBACK HandleDDENotification( UINT uType, UINT uFmt, HCONV hconv, HSZ hsz1, HSZ hsz2, HDDEDATA hdata, ULONG_PTR dwData1, ULONG_PTR dwData2 ); static void ParseDDEArg( HSZ args, int index, nsString& string); static void ParseDDEArg( const WCHAR* args, int index, nsString& aString); static HDDEDATA CreateDDEData( DWORD value ); static HDDEDATA CreateDDEData( LPBYTE value, DWORD len ); static PRBool InitTopicStrings(); static int FindTopic( HSZ topic ); #endif static void ActivateLastWindow(); static nsresult OpenWindow( const char *urlstr, const char *args ); static nsresult OpenBrowserWindow(); static nsresult ReParent( nsISupports *window, HWND newParent ); static void SetupSysTrayIcon(); static void RemoveSysTrayIcon(); static int mConversations; enum { topicOpenURL, topicActivate, topicCancelProgress, topicVersion, topicRegisterViewer, topicUnRegisterViewer, topicGetWindowInfo, // Note: Insert new values above this line!!!!! topicCount // Count of the number of real topics }; #ifndef WINCE static HSZ mApplication, mTopics[ topicCount ]; #endif static DWORD mInstance; static PRBool mCanHandleRequests; static PRUnichar mMutexName[]; friend struct MessageWindow; }; // nsNativeAppSupportWin NS_INTERFACE_MAP_BEGIN(nsNativeAppSupportWin) NS_INTERFACE_MAP_ENTRY(nsIObserver) NS_INTERFACE_MAP_END_INHERITING(nsNativeAppSupportBase) NS_IMPL_ADDREF_INHERITED(nsNativeAppSupportWin, nsNativeAppSupportBase) NS_IMPL_RELEASE_INHERITED(nsNativeAppSupportWin, nsNativeAppSupportBase) void nsNativeAppSupportWin::CheckConsole() { for ( int i = 1; i < gArgc; i++ ) { if ( strcmp( "-console", gArgv[i] ) == 0 || strcmp( "/console", gArgv[i] ) == 0 ) { // Users wants to make sure we have a console. // Try to allocate one. #ifndef WINCE BOOL rc = ::AllocConsole(); if ( rc ) { // Console allocated. Fix it up so that output works in // all cases. See http://support.microsoft.com/support/kb/articles/q105/3/05.asp. // stdout int hCrt = ::_open_osfhandle( (long)GetStdHandle( STD_OUTPUT_HANDLE ), _O_TEXT ); if ( hCrt != -1 ) { FILE *hf = ::_fdopen( hCrt, "w" ); if ( hf ) { *stdout = *hf; #ifdef DEBUG ::fprintf( stdout, "stdout directed to dynamic console\n" ); #endif } } // stderr hCrt = ::_open_osfhandle( (long)::GetStdHandle( STD_ERROR_HANDLE ), _O_TEXT ); if ( hCrt != -1 ) { FILE *hf = ::_fdopen( hCrt, "w" ); if ( hf ) { *stderr = *hf; #ifdef DEBUG ::fprintf( stderr, "stderr directed to dynamic console\n" ); #endif } } // stdin? /* Don't bother for now. hCrt = ::_open_osfhandle( (long)::GetStdHandle( STD_INPUT_HANDLE ), _O_TEXT ); if ( hCrt != -1 ) { FILE *hf = ::_fdopen( hCrt, "r" ); if ( hf ) { *stdin = *hf; } } */ } else { // Failed. Probably because there already is one. // There's little we can do, in any case. } #endif // Remove the console argument from the command line. do { gArgv[i] = gArgv[i + 1]; ++i; } while (gArgv[i]); --gArgc; // Don't bother doing this more than once. break; } } return; } // Create and return an instance of class nsNativeAppSupportWin. nsresult NS_CreateNativeAppSupport( nsINativeAppSupport **aResult ) { nsNativeAppSupportWin *pNative = new nsNativeAppSupportWin; if (!pNative) return NS_ERROR_OUT_OF_MEMORY; // Check for dynamic console creation request. pNative->CheckConsole(); *aResult = pNative; NS_ADDREF( *aResult ); return NS_OK; } // Constants #define MOZ_DDE_APPLICATION "Mozilla" #define MOZ_MUTEX_NAMESPACE L"Local\\" #define MOZ_STARTUP_MUTEX_NAME L"StartupMutex" #define MOZ_DDE_START_TIMEOUT 30000 #define MOZ_DDE_STOP_TIMEOUT 15000 #define MOZ_DDE_EXEC_TIMEOUT 15000 // The array entries must match the enum ordering! const char * const topicNames[] = { "WWW_OpenURL", "WWW_Activate", "WWW_CancelProgress", "WWW_Version", "WWW_RegisterViewer", "WWW_UnRegisterViewer", "WWW_GetWindowInfo" }; // Static member definitions. int nsNativeAppSupportWin::mConversations = 0; #ifndef WINCE HSZ nsNativeAppSupportWin::mApplication = 0; HSZ nsNativeAppSupportWin::mTopics[nsNativeAppSupportWin::topicCount] = { 0 }; #endif DWORD nsNativeAppSupportWin::mInstance = 0; PRBool nsNativeAppSupportWin::mCanHandleRequests = PR_FALSE; PRUnichar nsNativeAppSupportWin::mMutexName[ 128 ] = { 0 }; // Message window encapsulation. struct MessageWindow { // ctor/dtor are simplistic MessageWindow() { // Try to find window. mHandle = ::FindWindowW( className(), 0 ); } // Act like an HWND. operator HWND() { return mHandle; } // Class name: appName + "MessageWindow" static const PRUnichar *className() { static PRUnichar classNameBuffer[128]; static PRUnichar *mClassName = 0; if ( !mClassName ) { ::_snwprintf(classNameBuffer, 128, // size of classNameBuffer in PRUnichars L"%s%s", NS_ConvertUTF8toUTF16(gAppData->name).get(), L"MessageWindow" ); mClassName = classNameBuffer; } return mClassName; } // Create: Register class and create window. NS_IMETHOD Create() { WNDCLASSW classStruct = { 0, // style &MessageWindow::WindowProc, // lpfnWndProc 0, // cbClsExtra 0, // cbWndExtra 0, // hInstance 0, // hIcon 0, // hCursor 0, // hbrBackground 0, // lpszMenuName className() }; // lpszClassName // Register the window class. NS_ENSURE_TRUE( ::RegisterClassW( &classStruct ), NS_ERROR_FAILURE ); // Create the window. NS_ENSURE_TRUE( ( mHandle = ::CreateWindowW(className(), 0, // title WS_CAPTION, // style 0,0,0,0, // x, y, cx, cy 0, // parent 0, // menu 0, // instance 0 ) ), // create struct NS_ERROR_FAILURE ); #if MOZ_DEBUG_DDE printf( "Message window = 0x%08X\n", (int)mHandle ); #endif return NS_OK; } // Destory: Get rid of window and reset mHandle. NS_IMETHOD Destroy() { nsresult retval = NS_OK; if ( mHandle ) { // DestroyWindow can only destroy windows created from // the same thread. BOOL desRes = DestroyWindow( mHandle ); if ( FALSE != desRes ) { mHandle = NULL; } else { retval = NS_ERROR_FAILURE; } } return retval; } // SendRequest: Pass the command line via WM_COPYDATA to message window. NS_IMETHOD SendRequest() { WCHAR *cmd = ::GetCommandLineW(); WCHAR cwd[MAX_PATH]; _wgetcwd(cwd, MAX_PATH); // Construct a narrow UTF8 buffer \0\0 NS_ConvertUTF16toUTF8 utf8buffer(cmd); utf8buffer.Append('\0'); AppendUTF16toUTF8(cwd, utf8buffer); utf8buffer.Append('\0'); // We used to set dwData to zero, when we didn't send the working dir. // Now we're using it as a version number. COPYDATASTRUCT cds = { 1, utf8buffer.Length(), (void*) utf8buffer.get() }; // Bring the already running Mozilla process to the foreground. // nsWindow will restore the window (if minimized) and raise it. ::SetForegroundWindow( mHandle ); ::SendMessage( mHandle, WM_COPYDATA, 0, (LPARAM)&cds ); return NS_OK; } // Window proc. static LRESULT CALLBACK WindowProc( HWND msgWindow, UINT msg, WPARAM wp, LPARAM lp ) { if ( msg == WM_COPYDATA ) { if (!nsNativeAppSupportWin::mCanHandleRequests) return FALSE; // This is an incoming request. COPYDATASTRUCT *cds = (COPYDATASTRUCT*)lp; #if MOZ_DEBUG_DDE printf( "Incoming request: %s\n", (const char*)cds->lpData ); #endif nsCOMPtr workingDir; if (1 >= cds->dwData) { char* wdpath = (char*) cds->lpData; // skip the command line, and get the working dir of the // other process, which is after the first null char while (*wdpath) ++wdpath; ++wdpath; #ifdef MOZ_DEBUG_DDE printf( "Working dir: %s\n", wdpath); #endif NS_NewLocalFile(NS_ConvertUTF8toUTF16(wdpath), PR_FALSE, getter_AddRefs(workingDir)); } (void)nsNativeAppSupportWin::HandleCommandLine((char*)cds->lpData, workingDir, nsICommandLine::STATE_REMOTE_AUTO); // Get current window and return its window handle. nsCOMPtr win; GetMostRecentWindow( 0, getter_AddRefs( win ) ); return win ? (long)hwndForDOMWindow( win ) : 0; } return DefWindowProc( msgWindow, msg, wp, lp ); } private: HWND mHandle; }; // struct MessageWindow /* Start: Tries to find the "message window" to determine if it * exists. If so, then Mozilla is already running. In that * case, we use the handle to the "message" window and send * a request corresponding to this process's command line * options. * * If not, then this is the first instance of Mozilla. In * that case, we create and set up the message window. * * The checking for existance of the message window must * be protected by use of a mutex semaphore. */ NS_IMETHODIMP nsNativeAppSupportWin::Start( PRBool *aResult ) { NS_ENSURE_ARG( aResult ); NS_ENSURE_TRUE( mInstance == 0, NS_ERROR_NOT_INITIALIZED ); NS_ENSURE_STATE( gAppData ); if (getenv("MOZ_NO_REMOTE")) { *aResult = PR_TRUE; return NS_OK; } nsresult rv = NS_ERROR_FAILURE; *aResult = PR_FALSE; // Grab mutex first. // Build mutex name from app name. ::_snwprintf(mMutexName, sizeof mMutexName / sizeof(PRUnichar), L"%s%s%s", MOZ_MUTEX_NAMESPACE, gAppData->name, MOZ_STARTUP_MUTEX_NAME ); Mutex startupLock = Mutex( mMutexName ); NS_ENSURE_TRUE( startupLock.Lock( MOZ_DDE_START_TIMEOUT ), NS_ERROR_FAILURE ); // Search for existing message window. MessageWindow msgWindow; if ( (HWND)msgWindow ) { // We are a client process. Pass request to message window. rv = msgWindow.SendRequest(); } else { // We will be server. rv = msgWindow.Create(); if ( NS_SUCCEEDED( rv ) ) { #ifndef WINCE // Start up DDE server. this->StartDDE(); #endif // Tell caller to spin message loop. *aResult = PR_TRUE; } } startupLock.Unlock(); return rv; } #ifndef WINCE PRBool nsNativeAppSupportWin::InitTopicStrings() { for ( int i = 0; i < topicCount; i++ ) { if ( !( mTopics[ i ] = DdeCreateStringHandleA( mInstance, const_cast(topicNames[ i ]), CP_WINANSI ) ) ) { return PR_FALSE; } } return PR_TRUE; } int nsNativeAppSupportWin::FindTopic( HSZ topic ) { for ( int i = 0; i < topicCount; i++ ) { if ( DdeCmpStringHandles( topic, mTopics[i] ) == 0 ) { return i; } } return -1; } // Start DDE server. // // This used to be the Start() method when we were using DDE as the // primary IPC mechanism between secondary Mozilla processes and the // initial "server" process. // // Now, it simply initializes the DDE server. The caller must check // that this process is to be the server, and, must acquire the DDE // startup mutex semaphore prior to calling this routine. See ::Start(), // above. NS_IMETHODIMP nsNativeAppSupportWin::StartDDE() { NS_ENSURE_TRUE( mInstance == 0, NS_ERROR_NOT_INITIALIZED ); // Initialize DDE. NS_ENSURE_TRUE( DMLERR_NO_ERROR == DdeInitialize( &mInstance, nsNativeAppSupportWin::HandleDDENotification, APPCLASS_STANDARD, 0 ), NS_ERROR_FAILURE ); // Allocate DDE strings. NS_ENSURE_TRUE( ( mApplication = DdeCreateStringHandleA( mInstance, (char*) gAppData->name, CP_WINANSI ) ) && InitTopicStrings(), NS_ERROR_FAILURE ); // Next step is to register a DDE service. NS_ENSURE_TRUE( DdeNameService( mInstance, mApplication, 0, DNS_REGISTER ), NS_ERROR_FAILURE ); #if MOZ_DEBUG_DDE printf( "DDE server started\n" ); #endif return NS_OK; } #endif /* WINCE */ // If no DDE conversations are pending, terminate DDE. NS_IMETHODIMP nsNativeAppSupportWin::Stop( PRBool *aResult ) { NS_ENSURE_ARG( aResult ); NS_ENSURE_TRUE( mInstance, NS_ERROR_NOT_INITIALIZED ); nsresult rv = NS_OK; *aResult = PR_TRUE; Mutex ddeLock( mMutexName ); if ( ddeLock.Lock( MOZ_DDE_STOP_TIMEOUT ) ) { if ( mConversations == 0 ) { this->Quit(); } else { *aResult = PR_FALSE; } ddeLock.Unlock(); } else { // No DDE application name specified, but that's OK. Just // forge ahead. *aResult = PR_TRUE; } return rv; } NS_IMETHODIMP nsNativeAppSupportWin::Observe(nsISupports* aSubject, const char* aTopic, const PRUnichar* aData) { if (strcmp(aTopic, "quit-application") == 0) { Quit(); } else { NS_ERROR("Unexpected observer topic."); } return NS_OK; } // Terminate DDE regardless. NS_IMETHODIMP nsNativeAppSupportWin::Quit() { // If another process wants to look for the message window, they need // to wait to hold the lock, in which case they will not find the // window as we will destroy ours under our lock. // When the mutex goes off the stack, it is unlocked via destructor. Mutex mutexLock(mMutexName); NS_ENSURE_TRUE(mutexLock.Lock(MOZ_DDE_START_TIMEOUT), NS_ERROR_FAILURE); // If we've got a message window to receive IPC or new window requests, // get rid of it as we are shutting down. // Note: Destroy calls DestroyWindow, which will only work on a window // created by the same thread. MessageWindow mw; mw.Destroy(); if ( mInstance ) { // Unregister application name. #ifndef WINCE DdeNameService( mInstance, mApplication, 0, DNS_UNREGISTER ); // Clean up strings. if ( mApplication ) { DdeFreeStringHandle( mInstance, mApplication ); mApplication = 0; } for ( int i = 0; i < topicCount; i++ ) { if ( mTopics[i] ) { DdeFreeStringHandle( mInstance, mTopics[i] ); mTopics[i] = 0; } } DdeUninitialize( mInstance ); #endif mInstance = 0; #if MOZ_DEBUG_DDE printf( "DDE server stopped\n" ); #endif } return NS_OK; } NS_IMETHODIMP nsNativeAppSupportWin::Enable() { mCanHandleRequests = PR_TRUE; nsCOMPtr obs (do_GetService("@mozilla.org/observer-service;1")); if (obs) { obs->AddObserver(this, "quit-application", PR_FALSE); } else { NS_ERROR("No observer service?"); } return NS_OK; } #if MOZ_DEBUG_DDE // Macro to generate case statement for a given XTYP value. #define XTYP_CASE(t) \ case t: result = #t; break static nsCString uTypeDesc( UINT uType ) { nsCString result; switch ( uType ) { XTYP_CASE(XTYP_ADVSTART); XTYP_CASE(XTYP_CONNECT); XTYP_CASE(XTYP_ADVREQ); XTYP_CASE(XTYP_REQUEST); XTYP_CASE(XTYP_WILDCONNECT); XTYP_CASE(XTYP_ADVDATA); XTYP_CASE(XTYP_EXECUTE); XTYP_CASE(XTYP_POKE); XTYP_CASE(XTYP_ADVSTOP); XTYP_CASE(XTYP_CONNECT_CONFIRM); XTYP_CASE(XTYP_DISCONNECT); XTYP_CASE(XTYP_ERROR); XTYP_CASE(XTYP_MONITOR); XTYP_CASE(XTYP_REGISTER); XTYP_CASE(XTYP_XACT_COMPLETE); XTYP_CASE(XTYP_UNREGISTER); default: result = "XTYP_?????"; } return result; } static nsCString hszValue( DWORD instance, HSZ hsz ) { // Extract string from HSZ. nsCString result("["); DWORD len = DdeQueryString( instance, hsz, NULL, NULL, CP_WINANSI ); if ( len ) { char buffer[ 256 ]; DdeQueryString( instance, hsz, buffer, sizeof buffer, CP_WINANSI ); result += buffer; } result += "]"; return result; } #elif !defined(WINCE) // These are purely a safety measure to avoid the infamous "won't // build non-debug" type Tinderbox flames. static nsCString uTypeDesc( UINT ) { return nsCString( "?" ); } static nsCString hszValue( DWORD, HSZ ) { return nsCString( "?" ); } #endif // Utility function to escape double-quotes within a string. static void escapeQuotes( nsAString &aString ) { PRInt32 offset = -1; while( 1 ) { // Find next '"'. offset = aString.FindChar( '"', ++offset ); if ( offset == kNotFound ) { // No more quotes, exit. break; } else { // Insert back-slash ahead of the '"'. aString.Insert( PRUnichar('\\'), offset ); // Increment offset because we just inserted a slash offset++; } } return; } #ifndef WINCE HDDEDATA CALLBACK nsNativeAppSupportWin::HandleDDENotification( UINT uType, // transaction type UINT uFmt, // clipboard data format HCONV hconv, // handle to the conversation HSZ hsz1, // handle to a string HSZ hsz2, // handle to a string HDDEDATA hdata, // handle to a global memory object ULONG_PTR dwData1, // transaction-specific data ULONG_PTR dwData2 ) { // transaction-specific data if (!mCanHandleRequests) return 0; #if MOZ_DEBUG_DDE printf( "DDE: uType =%s\n", uTypeDesc( uType ).get() ); printf( " uFmt =%u\n", (unsigned)uFmt ); printf( " hconv =%08x\n", (int)hconv ); printf( " hsz1 =%08x:%s\n", (int)hsz1, hszValue( mInstance, hsz1 ).get() ); printf( " hsz2 =%08x:%s\n", (int)hsz2, hszValue( mInstance, hsz2 ).get() ); printf( " hdata =%08x\n", (int)hdata ); printf( " dwData1=%08x\n", (int)dwData1 ); printf( " dwData2=%08x\n", (int)dwData2 ); #endif HDDEDATA result = 0; if ( uType & XCLASS_BOOL ) { switch ( uType ) { case XTYP_CONNECT: // Make sure its for our service/topic. if ( FindTopic( hsz1 ) != -1 ) { // We support this connection. result = (HDDEDATA)1; } break; case XTYP_CONNECT_CONFIRM: // We don't care about the conversation handle, at this point. result = (HDDEDATA)1; break; } } else if ( uType & XCLASS_DATA ) { if ( uType == XTYP_REQUEST ) { switch ( FindTopic( hsz1 ) ) { case topicOpenURL: { // Open a given URL... // Get the URL from the first argument in the command. nsAutoString url; ParseDDEArg(hsz2, 0, url); // Read the 3rd argument in the command to determine if a // new window is to be used. nsAutoString windowID; ParseDDEArg(hsz2, 2, windowID); // "" means to open the URL in a new window. if ( windowID.IsEmpty() ) { url.Insert(NS_LITERAL_STRING("mozilla -new-window "), 0); } else { url.Insert(NS_LITERAL_STRING("mozilla -url "), 0); } #if MOZ_DEBUG_DDE printf( "Handling dde XTYP_REQUEST request: [%s]...\n", NS_ConvertUTF16toUTF8(url).get() ); #endif // Now handle it. HandleCommandLine(NS_ConvertUTF16toUTF8(url).get(), nsnull, nsICommandLine::STATE_REMOTE_EXPLICIT); // Return pseudo window ID. result = CreateDDEData( 1 ); break; } case topicGetWindowInfo: { // This topic has to get the current URL, get the current // page title and then format the output into the DDE // return string. The return value is "URL","Page Title", // "Window ID" however the window ID is not used for this // command, therefore it is returned as a null string // This isn't really a loop. We just use "break" // statements to bypass the remaining steps when // something goes wrong. do { // Get most recently used Nav window. nsCOMPtr navWin; GetMostRecentWindow( NS_LITERAL_STRING( "navigator:browser" ).get(), getter_AddRefs( navWin ) ); if ( !navWin ) { // There is not a window open break; } // Get content window. nsCOMPtr content; navWin->GetContent( getter_AddRefs( content ) ); if ( !content ) { break; } // Convert that to internal interface. nsCOMPtr internalContent( do_QueryInterface( content ) ); if ( !internalContent ) { break; } // Get location. nsCOMPtr location; internalContent->GetLocation( getter_AddRefs( location ) ); if ( !location ) { break; } // Get href for URL. nsAutoString url; if ( NS_FAILED( location->GetHref( url ) ) ) { break; } // Escape any double-quotes. escapeQuotes( url ); // Now for the title... // Get the base window from the doc shell... nsCOMPtr baseWindow = do_QueryInterface( internalContent->GetDocShell() ); if ( !baseWindow ) { break; } // And from the base window we can get the title. nsXPIDLString title; if(!baseWindow) { break; } baseWindow->GetTitle(getter_Copies(title)); // Escape any double-quotes in the title. escapeQuotes( title ); // Use a string buffer for the output data, first // save a quote. nsCAutoString outpt( NS_LITERAL_CSTRING("\"") ); // Now copy the URL converting the Unicode string // to a single-byte ASCII string nsCAutoString tmpNativeStr; NS_CopyUnicodeToNative( url, tmpNativeStr ); outpt.Append( tmpNativeStr ); // Add the "," used to separate the URL and the page // title outpt.Append( NS_LITERAL_CSTRING("\",\"") ); // Now copy the current page title to the return string NS_CopyUnicodeToNative( title, tmpNativeStr ); outpt.Append( tmpNativeStr ); // Fill out the return string with the remainin ","" outpt.Append( NS_LITERAL_CSTRING( "\",\"\"" )); // Create a DDE handle to a char string for the data // being returned, this copies and creates a "shared" // copy of the DDE response until the calling APP // reads it and says it can be freed. result = CreateDDEData( (LPBYTE)(const char*)outpt.get(), outpt.Length() + 1 ); #if MOZ_DEBUG_DDE printf( "WWW_GetWindowInfo->%s\n", outpt.get() ); #endif } while ( PR_FALSE ); break; } case topicActivate: { // Activate a Nav window... nsAutoString windowID; ParseDDEArg(hsz2, 0, windowID); // 4294967295 is decimal for 0xFFFFFFFF which is also a // correct value to do that Activate last window stuff if ( windowID.EqualsLiteral( "-1" ) || windowID.EqualsLiteral( "4294967295" ) ) { // We only support activating the most recent window (or a new one). ActivateLastWindow(); // Return pseudo window ID. result = CreateDDEData( 1 ); } break; } case topicVersion: { // Return version. We're restarting at 1.0! DWORD version = 1 << 16; // "1.0" result = CreateDDEData( version ); break; } case topicRegisterViewer: { // Register new viewer (not implemented). result = CreateDDEData( PR_FALSE ); break; } case topicUnRegisterViewer: { // Unregister new viewer (not implemented). result = CreateDDEData( PR_FALSE ); break; } default: break; } } else if ( uType & XTYP_POKE ) { switch ( FindTopic( hsz1 ) ) { case topicCancelProgress: { // "Handle" progress cancel (actually, pretty much ignored). result = (HDDEDATA)DDE_FACK; break; } default: break; } } } else if ( uType & XCLASS_FLAGS ) { if ( uType == XTYP_EXECUTE ) { // Prove that we received the request. DWORD bytes; LPBYTE request = DdeAccessData( hdata, &bytes ); #if MOZ_DEBUG_DDE printf( "Handling dde request: [%s]...\n", (char*)request ); #endif // Default is to open in current window. PRBool new_window = PR_FALSE; nsAutoString url; ParseDDEArg((const WCHAR*) request, 0, url); // Read the 3rd argument in the command to determine if a // new window is to be used. nsAutoString windowID; ParseDDEArg((const WCHAR*) request, 2, windowID); // "" means to open the URL in a new window. if ( windowID.IsEmpty() ) { url.Insert(NS_LITERAL_STRING("mozilla -new-window "), 0); } else { url.Insert(NS_LITERAL_STRING("mozilla -url "), 0); } #if MOZ_DEBUG_DDE printf( "Handling dde XTYP_REQUEST request: [%s]...\n", NS_ConvertUTF16toUTF8(url).get() ); #endif // Now handle it. HandleCommandLine(NS_ConvertUTF16toUTF8(url).get(), nsnull, nsICommandLine::STATE_REMOTE_EXPLICIT); // Release the data. DdeUnaccessData( hdata ); result = (HDDEDATA)DDE_FACK; } else { result = (HDDEDATA)DDE_FNOTPROCESSED; } } else if ( uType & XCLASS_NOTIFICATION ) { } #if MOZ_DEBUG_DDE printf( "DDE result=%d (0x%08X)\n", (int)result, (int)result ); #endif return result; } #endif /* WINCE */ // Utility function to advance to end of quoted string. // p+offset must point to the comma preceding the arg on entry. // On return, p+result points to the closing '"' (or end of the string // if the closing '"' is missing) if the arg is quoted. If the arg // is not quoted, then p+result will point to the first character // of the arg. static PRInt32 advanceToEndOfQuotedArg( const WCHAR *p, PRInt32 offset, PRInt32 len ) { // Check whether the current arg is quoted. if ( p[++offset] == '"' ) { // Advance past the closing quote. while ( offset < len && p[++offset] != '"' ) { // If the current character is a backslash, then the // next character can't be a *real* '"', so skip it. if ( p[offset] == '\\' ) { offset++; } } } return offset; } #ifndef WINCE void nsNativeAppSupportWin::ParseDDEArg( const WCHAR* args, int index, nsString& aString) { if ( args ) { nsDependentString temp(args); // offset points to the comma preceding the desired arg. PRInt32 offset = -1; // Skip commas till we get to the arg we want. while( index-- ) { // If this arg is quoted, then go to closing quote. offset = advanceToEndOfQuotedArg( args, offset, temp.Length()); // Find next comma. offset = temp.FindChar( ',', offset ); if ( offset == kNotFound ) { // No more commas, give up. aString = args; return; } } // The desired argument starts just past the preceding comma, // which offset points to, and extends until the following // comma (or the end of the string). // // Since the argument might be enclosed in quotes, we need to // deal with that before searching for the terminating comma. // We advance offset so it ends up pointing to the start of // the argument we want. PRInt32 end = advanceToEndOfQuotedArg( args, offset++, temp.Length() ); // Find next comma (or end of string). end = temp.FindChar( ',', end ); if ( end == kNotFound ) { // Arg is the rest of the string. end = temp.Length(); } // Extract result. aString.Assign( args + offset, end - offset ); } return; } // Utility to parse out argument from a DDE item string. void nsNativeAppSupportWin::ParseDDEArg( HSZ args, int index, nsString& aString) { DWORD argLen = DdeQueryStringW( mInstance, args, NULL, NULL, CP_WINUNICODE ); // there wasn't any string, so return empty string if ( !argLen ) return; nsAutoString temp; // Ensure result's buffer is sufficiently big. temp.SetLength( argLen ); // Now get the string contents. DdeQueryString( mInstance, args, temp.BeginWriting(), temp.Length(), CP_WINUNICODE ); // Parse out the given arg. ParseDDEArg(temp.get(), index, aString); return; } HDDEDATA nsNativeAppSupportWin::CreateDDEData( DWORD value ) { return CreateDDEData( (LPBYTE)&value, sizeof value ); } HDDEDATA nsNativeAppSupportWin::CreateDDEData( LPBYTE value, DWORD len ) { HDDEDATA result = DdeCreateDataHandle( mInstance, value, len, 0, mApplication, CF_TEXT, 0 ); return result; } #endif /* WINCE */ void nsNativeAppSupportWin::ActivateLastWindow() { nsCOMPtr navWin; GetMostRecentWindow( NS_LITERAL_STRING("navigator:browser").get(), getter_AddRefs( navWin ) ); if ( navWin ) { // Activate that window. activateWindow( navWin ); } else { // Need to create a Navigator window, then. OpenBrowserWindow(); } } void nsNativeAppSupportWin::HandleCommandLine(const char* aCmdLineString, nsIFile* aWorkingDir, PRUint32 aState) { nsresult rv; int justCounting = 1; char **argv = 0; // Flags, etc. int init = 1; int between, quoted, bSlashCount; int argc; const char *p; nsCAutoString arg; nsCOMPtr cmdLine (do_CreateInstance("@mozilla.org/toolkit/command-line;1")); if (!cmdLine) { NS_ERROR("Couldn't create command line!"); return; } // Parse command line args according to MS spec // (see "Parsing C++ Command-Line Arguments" at // http://msdn.microsoft.com/library/devprods/vs6/visualc/vclang/_pluslang_parsing_c.2b2b_.command.2d.line_arguments.htm). // We loop if we've not finished the second pass through. while ( 1 ) { // Initialize if required. if ( init ) { p = aCmdLineString; between = 1; argc = quoted = bSlashCount = 0; init = 0; } if ( between ) { // We are traversing whitespace between args. // Check for start of next arg. if ( *p != 0 && !isspace( *p ) ) { // Start of another arg. between = 0; arg = ""; switch ( *p ) { case '\\': // Count the backslash. bSlashCount = 1; break; case '"': // Remember we're inside quotes. quoted = 1; break; default: // Add character to arg. arg += *p; break; } } else { // Another space between args, ignore it. } } else { // We are processing the contents of an argument. // Check for whitespace or end. if ( *p == 0 || ( !quoted && isspace( *p ) ) ) { // Process pending backslashes (interpret them // literally since they're not followed by a "). while( bSlashCount ) { arg += '\\'; bSlashCount--; } // End current arg. if ( !justCounting ) { argv[argc] = new char[ arg.Length() + 1 ]; strcpy( argv[argc], arg.get() ); } argc++; // We're now between args. between = 1; } else { // Still inside argument, process the character. switch ( *p ) { case '"': // First, digest preceding backslashes (if any). while ( bSlashCount > 1 ) { // Put one backsplash in arg for each pair. arg += '\\'; bSlashCount -= 2; } if ( bSlashCount ) { // Quote is literal. arg += '"'; bSlashCount = 0; } else { // Quote starts or ends a quoted section. if ( quoted ) { // Check for special case of consecutive double // quotes inside a quoted section. if ( *(p+1) == '"' ) { // This implies a literal double-quote. Fake that // out by causing next double-quote to look as // if it was preceded by a backslash. bSlashCount = 1; } else { quoted = 0; } } else { quoted = 1; } } break; case '\\': // Add to count. bSlashCount++; break; default: // Accept any preceding backslashes literally. while ( bSlashCount ) { arg += '\\'; bSlashCount--; } // Just add next char to the current arg. arg += *p; break; } } } // Check for end of input. if ( *p ) { // Go to next character. p++; } else { // If on first pass, go on to second. if ( justCounting ) { // Allocate argv array. argv = new char*[ argc ]; // Start second pass justCounting = 0; init = 1; } else { // Quit. break; } } } rv = cmdLine->Init(argc, argv, aWorkingDir, aState); // Cleanup. while ( argc ) { delete [] argv[ --argc ]; } delete [] argv; if (NS_FAILED(rv)) { NS_ERROR("Error initializing command line."); return; } cmdLine->Run(); } nsresult nsNativeAppSupportWin::OpenWindow( const char*urlstr, const char *args ) { nsresult rv = NS_ERROR_FAILURE; nsCOMPtr wwatch(do_GetService(NS_WINDOWWATCHER_CONTRACTID)); nsCOMPtr sarg(do_CreateInstance(NS_SUPPORTS_CSTRING_CONTRACTID)); if (sarg) sarg->SetData(nsDependentCString(args)); if (wwatch && sarg) { nsCOMPtr newWindow; rv = wwatch->OpenWindow(0, urlstr, "_blank", "chrome,dialog=no,all", sarg, getter_AddRefs(newWindow)); #if MOZ_DEBUG_DDE } else { printf("Get WindowWatcher (or create string) failed\n"); #endif } return rv; } HWND hwndForDOMWindow( nsISupports *window ) { nsCOMPtr pidomwindow( do_QueryInterface(window) ); if ( !pidomwindow ) { return 0; } nsCOMPtr ppBaseWindow = do_QueryInterface( pidomwindow->GetDocShell() ); if ( !ppBaseWindow ) { return 0; } nsCOMPtr ppWidget; ppBaseWindow->GetMainWidget( getter_AddRefs( ppWidget ) ); return (HWND)( ppWidget->GetNativeData( NS_NATIVE_WIDGET ) ); } static const char sJSStackContractID[] = "@mozilla.org/js/xpc/ContextStack;1"; class SafeJSContext { public: SafeJSContext(); ~SafeJSContext(); nsresult Push(); JSContext *get() { return mContext; } protected: nsCOMPtr mService; JSContext *mContext; }; SafeJSContext::SafeJSContext() : mContext(nsnull) { } SafeJSContext::~SafeJSContext() { JSContext *cx; nsresult rv; if(mContext) { rv = mService->Pop(&cx); NS_ASSERTION(NS_SUCCEEDED(rv) && cx == mContext, "JSContext push/pop mismatch"); } } nsresult SafeJSContext::Push() { if (mContext) // only once return NS_ERROR_FAILURE; mService = do_GetService(sJSStackContractID); if(mService) { JSContext *cx; if (NS_SUCCEEDED(mService->GetSafeJSContext(&cx)) && cx && NS_SUCCEEDED(mService->Push(cx))) { // Save cx in mContext to indicate need to pop. mContext = cx; } } return mContext ? NS_OK : NS_ERROR_FAILURE; } nsresult nsNativeAppSupportWin::OpenBrowserWindow() { nsresult rv = NS_OK; // Open the argument URL in the most recently used Navigator window. // If there is no Nav window, open a new one. // If at all possible, hand the request off to the most recent // browser window. nsCOMPtr navWin; GetMostRecentWindow( NS_LITERAL_STRING( "navigator:browser" ).get(), getter_AddRefs( navWin ) ); // This isn't really a loop. We just use "break" statements to fall // out to the OpenWindow call when things go awry. do { // If caller requires a new window, then don't use an existing one. if ( !navWin ) { // Have to open a new one. break; } nsCOMPtr bwin; { // scope a bunch of temporary cruft used to generate bwin nsCOMPtr navNav( do_GetInterface( navWin ) ); nsCOMPtr navItem( do_QueryInterface( navNav ) ); if ( navItem ) { nsCOMPtr rootItem; navItem->GetRootTreeItem( getter_AddRefs( rootItem ) ); nsCOMPtr rootWin( do_GetInterface( rootItem ) ); nsCOMPtr chromeWin(do_QueryInterface(rootWin)); if ( chromeWin ) chromeWin->GetBrowserDOMWindow( getter_AddRefs ( bwin ) ); } } if ( bwin ) { nsCOMPtr uri; NS_NewURI( getter_AddRefs( uri ), NS_LITERAL_CSTRING("about:blank"), 0, 0 ); if ( uri ) { nsCOMPtr container; rv = bwin->OpenURI( uri, 0, nsIBrowserDOMWindow::OPEN_DEFAULTWINDOW, nsIBrowserDOMWindow::OPEN_EXTERNAL, getter_AddRefs( container ) ); if ( NS_SUCCEEDED( rv ) ) return NS_OK; } } NS_ERROR("failed to hand off external URL to extant window\n"); } while ( PR_FALSE ); // open a new window if caller requested it or if anything above failed char* argv[] = { 0 }; nsCOMPtr cmdLine (do_CreateInstance("@mozilla.org/toolkit/command-line;1")); NS_ENSURE_TRUE(cmdLine, NS_ERROR_FAILURE); rv = cmdLine->Init(0, argv, nsnull, nsICommandLine::STATE_REMOTE_EXPLICIT); NS_ENSURE_SUCCESS(rv, rv); return cmdLine->Run(); }