/* -*- Mode: idl; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Oracle Corporation code. * * The Initial Developer of the Original Code is * Oracle Corporation * Portions created by the Initial Developer are Copyright (C) 2004 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Vladimir Vukicevic * Brett Wilson * Shawn Wilsher * Lev Serebryakov * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "nsISupports.idl" interface mozIStorageAggregateFunction; interface mozIStorageCompletionCallback; interface mozIStorageFunction; interface mozIStorageProgressHandler; interface mozIStorageBaseStatement; interface mozIStorageStatement; interface mozIStorageAsyncStatement; interface mozIStorageStatementCallback; interface mozIStoragePendingStatement; interface nsIFile; /** * mozIStorageConnection represents a database connection attached to * a specific file or to the in-memory data storage. It is the * primary interface for interacting with a database, including * creating prepared statements, executing SQL, and examining database * errors. * * @threadsafe */ [scriptable, uuid(b2a4b534-f92e-4387-9bd9-d10408173925)] interface mozIStorageConnection : nsISupports { /** * The default size for SQLite database pages used by mozStorage for new * databases. * This value must stay in sync with the SQLITE_DEFAULT_PAGE_SIZE define in * /db/sqlite3/src/Makefile.in */ const long DEFAULT_PAGE_SIZE = 32768; /** * Closes a database connection. Callers must finalize all statements created * for this connection prior to calling this method. It is illegal to use * call this method if any asynchronous statements have been executed on this * connection. * * @throws NS_ERROR_UNEXPECTED * If any statement has been executed asynchronously on this object. * @throws NS_ERROR_UNEXPECTED * If is called on a thread other than the one that opened it. */ void close(); /** * Asynchronously closes a database connection, allowing all pending * asynchronous statements to complete first. * * @param aCallback [optional] * A callback that will be notified when the close is completed. * * @throws NS_ERROR_UNEXPECTED * If is called on a thread other than the one that opened it. */ void asyncClose([optional] in mozIStorageCompletionCallback aCallback); /** * Clones a database and makes the clone read only if needed. * * @note If your connection is already read-only, you will get a read-only * clone. * @note Due to a bug in SQLite, if you use the shared cache (openDatabase), * you end up with the same privileges as the first connection opened * regardless of what is specified in aReadOnly. * @note The following pragmas are copied over to a read-only clone: * - cache_size * - temp_store * The following pragmas are copied over to a writeable clone: * - cache_size * - temp_store * - foreign_keys * - journal_size_limit * - synchronous * - wal_autocheckpoint * * @throws NS_ERROR_UNEXPECTED * If this connection is a memory database. * * @param aReadOnly * If true, the returned database should be put into read-only mode. * Defaults to false. * @return the cloned database connection. */ mozIStorageConnection clone([optional] in boolean aReadOnly); /** * Indicates if the connection is open and ready to use. This will be false * if the connection failed to open, or it has been closed. */ readonly attribute boolean connectionReady; /** * The current database nsIFile. Null if the database * connection refers to an in-memory database. */ readonly attribute nsIFile databaseFile; /** * lastInsertRowID returns the row ID from the last INSERT * operation. */ readonly attribute long long lastInsertRowID; /** * affectedRows returns the number of database rows that were changed or * inserted or deleted by last operation. */ readonly attribute long affectedRows; /** * The last error SQLite error code. */ readonly attribute long lastError; /** * The last SQLite error as a string (in english, straight from the * sqlite library). */ readonly attribute AUTF8String lastErrorString; /** * The schema version of the database. This should not be used until the * database is ready. The schema will be reported as zero if it is not set. */ attribute long schemaVersion; ////////////////////////////////////////////////////////////////////////////// //// Statement creation /** * Create a mozIStorageStatement for the given SQL expression. The * expression may use ? to indicate sequential numbered arguments, * ?1, ?2 etc. to indicate specific numbered arguments or :name and * $var to indicate named arguments. * * @param aSQLStatement * The SQL statement to execute. * @return a new mozIStorageStatement */ mozIStorageStatement createStatement(in AUTF8String aSQLStatement); /** * Create an asynchronous statement (mozIStorageAsyncStatement) for the given * SQL expression. An asynchronous statement can only be used to dispatch * asynchronous requests to the asynchronous execution thread and cannot be * used to take any synchronous actions on the database. * * The expression may use ? to indicate sequential numbered arguments, * ?1, ?2 etc. to indicate specific numbered arguments or :name and * $var to indicate named arguments. * * @param aSQLStatement * The SQL statement to execute. * @return a new mozIStorageAsyncStatement */ mozIStorageAsyncStatement createAsyncStatement(in AUTF8String aSQLStatement); /** * Execute a SQL expression, expecting no arguments. * * @param aSQLStatement The SQL statement to execute */ void executeSimpleSQL(in AUTF8String aSQLStatement); /** * Execute an array of queries created with this connection asynchronously * using any currently bound parameters. The statements are ran wrapped in a * transaction. These statements can be reused immediately, and reset does * not need to be called. * * Note: If you have any custom defined functions, they must be re-entrant * since they can be called on multiple threads. * * @param aStatements * The array of statements to execute asynchronously, in the order they * are given in the array. * @param aNumStatements * The number of statements in aStatements. * @param aCallback [optional] * The callback object that will be notified of progress, errors, and * completion. * @return an object that can be used to cancel the statements execution. */ mozIStoragePendingStatement executeAsync( [array, size_is(aNumStatements)] in mozIStorageBaseStatement aStatements, in unsigned long aNumStatements, [optional] in mozIStorageStatementCallback aCallback ); /** * Check if the given table exists. * * @param aTableName * The table to check * @return TRUE if table exists, FALSE otherwise. */ boolean tableExists(in AUTF8String aTableName); /** * Check if the given index exists. * * @param aIndexName The index to check * @return TRUE if the index exists, FALSE otherwise. */ boolean indexExists(in AUTF8String aIndexName); ////////////////////////////////////////////////////////////////////////////// //// Transactions /** * Returns true if a transaction is active on this connection. */ readonly attribute boolean transactionInProgress; /** * Begin a new transaction. sqlite default transactions are deferred. * If a transaction is active, throws an error. */ void beginTransaction(); /** * Begins a new transaction with the given type. */ const PRInt32 TRANSACTION_DEFERRED = 0; const PRInt32 TRANSACTION_IMMEDIATE = 1; const PRInt32 TRANSACTION_EXCLUSIVE = 2; void beginTransactionAs(in PRInt32 transactionType); /** * Commits the current transaction. If no transaction is active, * @throws NS_ERROR_UNEXPECTED. * @throws NS_ERROR_NOT_INITIALIZED. */ void commitTransaction(); /** * Rolls back the current transaction. If no transaction is active, * @throws NS_ERROR_UNEXPECTED. * @throws NS_ERROR_NOT_INITIALIZED. */ void rollbackTransaction(); ////////////////////////////////////////////////////////////////////////////// //// Tables /** * Create the table with the given name and schema. * * If the table already exists, NS_ERROR_FAILURE is thrown. * (XXX at some point in the future it will check if the schema is * the same as what is specified, but that doesn't happen currently.) * * @param aTableName * The table name to be created, consisting of [A-Za-z0-9_], and * beginning with a letter. * @param aTableSchema * The schema of the table; what would normally go between the parens * in a CREATE TABLE statement: e.g., "foo INTEGER, bar STRING". * * @throws NS_ERROR_FAILURE * If the table already exists or could not be created for any other * reason. */ void createTable(in string aTableName, in string aTableSchema); ////////////////////////////////////////////////////////////////////////////// //// Functions /** * Create a new SQL function. If you use your connection on multiple threads, * your function needs to be threadsafe, or it should only be called on one * thread. * * @param aFunctionName * The name of function to create, as seen in SQL. * @param aNumArguments * The number of arguments the function takes. Pass -1 for * variable-argument functions. * @param aFunction * The instance of mozIStorageFunction, which implements the function * in question. */ void createFunction(in AUTF8String aFunctionName, in long aNumArguments, in mozIStorageFunction aFunction); /** * Create a new SQL aggregate function. If you use your connection on * multiple threads, your function needs to be threadsafe, or it should only * be called on one thread. * * @param aFunctionName * The name of aggregate function to create, as seen in SQL. * @param aNumArguments * The number of arguments the function takes. Pass -1 for * variable-argument functions. * @param aFunction * The instance of mozIStorageAggreagteFunction, which implements the * function in question. */ void createAggregateFunction(in AUTF8String aFunctionName, in long aNumArguments, in mozIStorageAggregateFunction aFunction); /** * Delete custom SQL function (simple or aggregate one). * * @param aFunctionName * The name of function to remove. */ void removeFunction(in AUTF8String aFunctionName); /** * Sets a progress handler. Only one handler can be registered at a time. * If you need more than one, you need to chain them yourself. This progress * handler should be threadsafe if you use this connection object on more than * one thread. * * @param aGranularity * The number of SQL virtual machine steps between progress handler * callbacks. * @param aHandler * The instance of mozIStorageProgressHandler. * @return previous registered handler. */ mozIStorageProgressHandler setProgressHandler(in PRInt32 aGranularity, in mozIStorageProgressHandler aHandler); /** * Remove a progress handler. * * @return previous registered handler. */ mozIStorageProgressHandler removeProgressHandler(); /** * Controls SQLITE_FCNTL_CHUNK_SIZE setting in sqlite. This helps avoid fragmentation * by growing/shrinking the database file in SQLITE_FCNTL_CHUNK_SIZE increments. To * conserve memory on systems short on storage space, this function will have no effect * on mobile devices or if less than 500MiB of space is left available. * * @param aIncrement * The database file will grow in multiples of chunkSize. * @param aDatabaseName * Sqlite database name. "" means pass NULL for zDbName to sqlite3_file_control. * See http://sqlite.org/c3ref/file_control.html for more details. * @throws NS_ERROR_FILE_TOO_BIG * If the system is short on storage space. */ void setGrowthIncrement(in PRInt32 aIncrement, in AUTF8String aDatabaseName); /** * Enable a predefined virtual table implementation. * * @param aModuleName * The module to enable. Only "filesystem" is currently supported. * * @throws NS_ERROR_FAILURE * For unknown module names. */ [noscript] void enableModule(in ACString aModuleName); };