/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- * * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is spacetrace.h/spacetrace.c code, released * Nov 6, 2001. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 2001 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Garrett Arch Blythe, 31-October-2001 * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ /* ** spacetrace.c ** ** SpaceTrace is meant to take the output of trace-malloc and present ** a picture of allocations over the run of the application. */ /* ** Required include files. */ #include "spacetrace.h" #include #include #include #include #if defined(XP_WIN32) #include /* _heapMin */ #endif #if defined(HAVE_BOUTELL_GD) /* ** See http://www.boutell.com/gd for the GD graphics library. ** Ports for many platorms exist. ** Your box may already have the lib (mine did, redhat 7.1 workstation). */ #include #include #include #include #endif /* HAVE_BOUTELL_GD */ /* ** Ugh, MSVC6's qsort is too slow... */ #include "nsQuickSort.h" #include "prlong.h" /* ** strcasecmp API please. */ #if defined(_MSC_VER) #define strcasecmp _stricmp #define strncasecmp _strnicmp #endif /* ** the globals variables. happy joy. */ STGlobals globals; /* ** have the heap cleanup at opportune times, if possible. */ void heapCompact(void) { #if defined(XP_WIN32) _heapmin(); #endif } #define ST_CMD_OPTION_BOOL(option_name, option_genre, option_help) \ PR_fprintf(PR_STDOUT, "--%s\nDisabled by default.\n%s\n", #option_name, option_help); #define ST_CMD_OPTION_STRING(option_name, option_genre, default_value, option_help) \ PR_fprintf(PR_STDOUT, "--%s=\nDefault value is \"%s\".\n%s\n", #option_name, default_value, option_help); #define ST_CMD_OPTION_STRING_ARRAY(option_name, option_genre, array_size, option_help) \ PR_fprintf(PR_STDOUT, "--%s=\nUp to %u occurrences allowed.\n%s\n", #option_name, array_size, option_help); #define ST_CMD_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help) \ PR_fprintf(PR_STDOUT, "--%s=\nUnlimited occurrences allowed.\n%s\n", #option_name, option_help); #define ST_CMD_OPTION_UINT32(option_name, option_genre, default_value, multiplier, option_help) \ PR_fprintf(PR_STDOUT, "--%s=\nDefault value is %u.\n%s\n", #option_name, default_value, option_help); #define ST_CMD_OPTION_UINT64(option_name, option_genre, default_value, multiplier, option_help) \ PR_fprintf(PR_STDOUT, "--%s=\nDefault value is %llu.\n%s\n", #option_name, default_value, option_help); /* ** showHelp ** ** Give simple command line help. ** Returns !0 if the help was showed. */ int showHelp(void) { int retval = 0; if (PR_FALSE != globals.mCommandLineOptions.mHelp) { PR_fprintf(PR_STDOUT, "Usage:\t%s [OPTION]... [-|filename]\n\n", globals.mProgramName); #include "stoptions.h" /* ** Showed something. */ retval = __LINE__; } return retval; } /* ** ticks2xsec ** ** Convert platform specific ticks to second units ** Returns 0 on success. */ PRUint32 ticks2xsec(tmreader * aReader, PRUint32 aTicks, PRUint32 aResolution) { PRUint32 retval = 0; PRUint64 bigone; PRUint64 tmp64; LL_UI2L(bigone, aResolution); LL_UI2L(tmp64, aTicks); LL_MUL(bigone, bigone, tmp64); LL_UI2L(tmp64, aReader->ticksPerSec); LL_DIV(bigone, bigone, tmp64); LL_L2UI(retval, bigone); return retval; } #define ticks2msec(reader, ticks) ticks2xsec((reader), (ticks), 1000) #define ticks2usec(reader, ticks) ticks2xsec((reader), (ticks), 1000000) /* ** initOptions ** ** Determine global settings for the application. ** Returns 0 on success. */ int initOptions(int aArgCount, char **aArgArray) { int retval = 0; int traverse = 0; /* ** Set the initial global default options. */ #define ST_CMD_OPTION_BOOL(option_name, option_genre, option_help) globals.mCommandLineOptions.m##option_name = PR_FALSE; #define ST_CMD_OPTION_STRING(option_name, option_genre, default_value, option_help) PR_snprintf(globals.mCommandLineOptions.m##option_name, sizeof(globals.mCommandLineOptions.m##option_name), "%s", default_value); #define ST_CMD_OPTION_STRING_ARRAY(option_name, option_genre, array_size, option_help) { int loop; for(loop = 0; loop < array_size; loop++) { globals.mCommandLineOptions.m##option_name[loop][0] = '\0'; } } #define ST_CMD_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help) globals.mCommandLineOptions.m##option_name = NULL; globals.mCommandLineOptions.m##option_name##Count = 0; #define ST_CMD_OPTION_UINT32(option_name, option_genre, default_value, multiplier, option_help) globals.mCommandLineOptions.m##option_name = default_value * multiplier; #define ST_CMD_OPTION_UINT64(option_name, option_genre, default_value, multiplier, option_help) { PRUint64 def64 = default_value; PRUint64 mul64 = multiplier; LL_MUL(globals.mCommandLineOptions.m##option_name##64, def64, mul64); } #include "stoptions.h" /* ** Go through all arguments. ** Two dashes lead off an option. ** Any single dash leads off help, unless it is a lone dash (stdin). ** Anything else will be attempted as a file to be processed. */ for (traverse = 1; traverse < aArgCount; traverse++) { if ('-' == aArgArray[traverse][0] && '-' == aArgArray[traverse][1]) { const char *option = &aArgArray[traverse][2]; /* ** Initial if(0) needed to make "else if"s valid. */ if (0) { } #define ST_CMD_OPTION_BOOL(option_name, option_genre, option_help) \ else if(0 == strcasecmp(option, #option_name)) \ { \ globals.mCommandLineOptions.m##option_name = PR_TRUE; \ } #define ST_CMD_OPTION_STRING(option_name, option_genre, default_value, option_help) \ else if(0 == strncasecmp(option, #option_name "=", strlen(#option_name "="))) \ { \ PR_snprintf(globals.mCommandLineOptions.m##option_name, sizeof(globals.mCommandLineOptions.m##option_name), "%s", option + strlen(#option_name "=")); \ } #define ST_CMD_OPTION_STRING_ARRAY(option_name, option_genre, array_size, option_help) \ else if(0 == strncasecmp(option, #option_name "=", strlen(#option_name "="))) \ { \ int arrLoop = 0; \ \ for(arrLoop = 0; arrLoop < array_size; arrLoop++) \ { \ if('\0' == globals.mCommandLineOptions.m##option_name[arrLoop][0]) \ { \ break; \ } \ }\ \ if(arrLoop != array_size) \ { \ PR_snprintf(globals.mCommandLineOptions.m##option_name[arrLoop], sizeof(globals.mCommandLineOptions.m##option_name[arrLoop]), "%s", option + strlen(#option_name "=")); \ } \ else \ { \ REPORT_ERROR_MSG(__LINE__, option); \ retval = __LINE__; \ globals.mCommandLineOptions.mHelp = PR_TRUE; \ } \ } #define ST_CMD_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help) \ else if(0 == strncasecmp(option, #option_name "=", strlen(#option_name "="))) \ { \ const char** expand = NULL; \ \ expand = (const char**)realloc((void*)globals.mCommandLineOptions.m##option_name, sizeof(const char*) * (globals.mCommandLineOptions.m##option_name##Count + 1)); \ if(NULL != expand) \ { \ globals.mCommandLineOptions.m##option_name = expand; \ globals.mCommandLineOptions.m##option_name[globals.mCommandLineOptions.m##option_name##Count] = option + strlen(#option_name "="); \ globals.mCommandLineOptions.m##option_name##Count++; \ } \ else \ { \ retval = __LINE__; \ globals.mCommandLineOptions.mHelp = PR_TRUE; \ } \ } #define ST_CMD_OPTION_UINT32(option_name, option_genre, default_value, multiplier, option_help) \ else if(0 == strncasecmp(option, #option_name "=", strlen(#option_name "="))) \ { \ PRInt32 scanRes = 0; \ \ scanRes = PR_sscanf(option + strlen(#option_name "="), "%u", &globals.mCommandLineOptions.m##option_name); \ if(1 != scanRes) \ { \ REPORT_ERROR_MSG(__LINE__, option); \ retval = __LINE__; \ globals.mCommandLineOptions.mHelp = PR_TRUE; \ } \ } #define ST_CMD_OPTION_UINT64(option_name, option_genre, default_value, multiplier, option_help) \ else if(0 == strncasecmp(option, #option_name "=", strlen(#option_name "="))) \ { \ PRInt32 scanRes = 0; \ \ scanRes = PR_sscanf(option + strlen(#option_name "="), "%llu", &globals.mCommandLineOptions.m##option_name##64); \ if(1 != scanRes) \ { \ REPORT_ERROR_MSG(__LINE__, option); \ retval = __LINE__; \ globals.mCommandLineOptions.mHelp = PR_TRUE; \ } \ } #include "stoptions.h" /* ** If no match on options, this else will get hit. */ else { REPORT_ERROR_MSG(__LINE__, option); retval = __LINE__; globals.mCommandLineOptions.mHelp = PR_TRUE; } } else if ('-' == aArgArray[traverse][0] && '\0' != aArgArray[traverse][1]) { /* ** Show help, bad/legacy option. */ REPORT_ERROR_MSG(__LINE__, aArgArray[traverse]); retval = __LINE__; globals.mCommandLineOptions.mHelp = PR_TRUE; } else { /* ** Default is same as FileName option, the file to process. */ PR_snprintf(globals.mCommandLineOptions.mFileName, sizeof(globals.mCommandLineOptions.mFileName), "%s", aArgArray[traverse]); } } /* ** initialize the categories */ initCategories(&globals); return retval; } #if ST_WANT_GRAPHS /* ** createGraph ** ** Create a GD image with the common properties of a graph. ** Upon return, you normally allocate legend colors, ** draw your graph inside the region ** STGD_MARGIN,STGD_MARGIN,STGD_WIDTH-STGD_MARGIN,STGD_HEIGH-STGD_MARGIN, ** and then call drawGraph to format the surrounding information. ** ** You should use the normal GD image release function, gdImageDestroy ** when done with it. ** ** Image attributes: ** STGD_WIDTHxSTGD_HEIGHT ** trasparent (white) background ** incremental display */ gdImagePtr createGraph(int *aTransparencyColor) { gdImagePtr retval = NULL; if (NULL != aTransparencyColor) { *aTransparencyColor = -1; retval = gdImageCreate(STGD_WIDTH, STGD_HEIGHT); if (NULL != retval) { /* ** Background color (first one). */ *aTransparencyColor = gdImageColorAllocate(retval, 255, 255, 255); if (-1 != *aTransparencyColor) { /* ** As transparency. */ gdImageColorTransparent(retval, *aTransparencyColor); } /* ** And to set interlacing. */ gdImageInterlace(retval, 1); } else { REPORT_ERROR(__LINE__, gdImageCreate); } } else { REPORT_ERROR(__LINE__, createGraph); } return retval; } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS /* ** drawGraph ** ** This function mainly exists to simplify putitng all the pretty lace ** around a home made graph. */ void drawGraph(gdImagePtr aImage, int aColor, const char *aGraphTitle, const char *aXAxisTitle, const char *aYAxisTitle, PRUint32 aXMarkCount, PRUint32 * aXMarkPercents, const char **aXMarkTexts, PRUint32 aYMarkCount, PRUint32 * aYMarkPercents, const char **aYMarkTexts, PRUint32 aLegendCount, int *aLegendColors, const char **aLegendTexts) { if (NULL != aImage && NULL != aGraphTitle && NULL != aXAxisTitle && NULL != aYAxisTitle && (0 == aXMarkCount || (NULL != aXMarkPercents && NULL != aXMarkTexts)) && (0 == aYMarkCount || (NULL != aYMarkPercents && NULL != aYMarkTexts)) && (0 == aLegendCount || (NULL != aLegendColors && NULL != aLegendTexts))) { int margin = 1; PRUint32 traverse = 0; PRUint32 target = 0; const int markSize = 2; int x1 = 0; int y1 = 0; int x2 = 0; int y2 = 0; time_t theTimeT = time(NULL); char *theTime = ctime(&theTimeT); const char *logo = "SpaceTrace"; gdFontPtr titleFont = gdFontMediumBold; gdFontPtr markFont = gdFontTiny; gdFontPtr dateFont = gdFontTiny; gdFontPtr axisFont = gdFontSmall; gdFontPtr legendFont = gdFontTiny; gdFontPtr logoFont = gdFontTiny; /* ** Fixup the color. ** Black by default. */ if (-1 == aColor) { aColor = gdImageColorAllocate(aImage, 0, 0, 0); } if (-1 == aColor) { aColor = gdImageColorClosest(aImage, 0, 0, 0); } /* ** Output the box. */ x1 = STGD_MARGIN - margin; y1 = STGD_MARGIN - margin; x2 = STGD_WIDTH - x1; y2 = STGD_HEIGHT - y1; gdImageRectangle(aImage, x1, y1, x2, y2, aColor); margin++; /* ** Need to make small markings on the graph to indicate where the ** labels line up exactly. ** While we're at it, draw the label text. */ for (traverse = 0; traverse < aXMarkCount; traverse++) { target = ((STGD_WIDTH - (STGD_MARGIN * 2)) * aXMarkPercents[traverse]) / 100; x1 = STGD_MARGIN + target; y1 = STGD_MARGIN - margin; x2 = x1; y2 = y1 - markSize; gdImageLine(aImage, x1, y1, x2, y2, aColor); y1 = STGD_HEIGHT - y1; y2 = STGD_HEIGHT - y2; gdImageLine(aImage, x1, y1, x2, y2, aColor); if (NULL != aXMarkTexts[traverse]) { x1 = STGD_MARGIN + target - (markFont->h / 2); y1 = STGD_HEIGHT - STGD_MARGIN + margin + markSize + (strlen(aXMarkTexts[traverse]) * markFont->w); gdImageStringUp(aImage, markFont, x1, y1, (unsigned char *) aXMarkTexts[traverse], aColor); } } for (traverse = 0; traverse < aYMarkCount; traverse++) { target = ((STGD_HEIGHT - (STGD_MARGIN * 2)) * (100 - aYMarkPercents [traverse])) / 100; x1 = STGD_MARGIN - margin; y1 = STGD_MARGIN + target; x2 = x1 - markSize; y2 = y1; gdImageLine(aImage, x1, y1, x2, y2, aColor); x1 = STGD_WIDTH - x1; x2 = STGD_WIDTH - x2; gdImageLine(aImage, x1, y1, x2, y2, aColor); if (NULL != aYMarkTexts[traverse]) { x1 = STGD_MARGIN - margin - markSize - (strlen(aYMarkTexts[traverse]) * markFont->w); y1 = STGD_MARGIN + target - (markFont->h / 2); gdImageString(aImage, markFont, x1, y1, (unsigned char *) aYMarkTexts[traverse], aColor); } } margin += markSize; /* ** Title will be centered above the image. */ x1 = (STGD_WIDTH / 2) - ((strlen(aGraphTitle) * titleFont->w) / 2); y1 = ((STGD_MARGIN - margin) / 2) - (titleFont->h / 2); gdImageString(aImage, titleFont, x1, y1, (unsigned char *) aGraphTitle, aColor); /* ** Upper left will be the date. */ x1 = 0; y1 = 0; traverse = strlen(theTime) - 1; if (isspace(theTime[traverse])) { theTime[traverse] = '\0'; } gdImageString(aImage, dateFont, x1, y1, (unsigned char *) theTime, aColor); /* ** Lower right will be the logo. */ x1 = STGD_WIDTH - (strlen(logo) * logoFont->w); y1 = STGD_HEIGHT - logoFont->h; gdImageString(aImage, logoFont, x1, y1, (unsigned char *) logo, aColor); /* ** X and Y axis titles */ x1 = (STGD_WIDTH / 2) - ((strlen(aXAxisTitle) * axisFont->w) / 2); y1 = STGD_HEIGHT - axisFont->h; gdImageString(aImage, axisFont, x1, y1, (unsigned char *) aXAxisTitle, aColor); x1 = 0; y1 = (STGD_HEIGHT / 2) + ((strlen(aYAxisTitle) * axisFont->w) / 2); gdImageStringUp(aImage, axisFont, x1, y1, (unsigned char *) aYAxisTitle, aColor); /* ** The legend. ** Centered on the right hand side, going up. */ x1 = STGD_WIDTH - STGD_MARGIN + margin + (aLegendCount * legendFont->h) / 2; x2 = STGD_WIDTH - (aLegendCount * legendFont->h); if (x1 > x2) { x1 = x2; } y1 = 0; for (traverse = 0; traverse < aLegendCount; traverse++) { y2 = (STGD_HEIGHT / 2) + ((strlen(aLegendTexts[traverse]) * legendFont->w) / 2); if (y2 > y1) { y1 = y2; } } for (traverse = 0; traverse < aLegendCount; traverse++) { gdImageStringUp(aImage, legendFont, x1, y1, (unsigned char *) aLegendTexts[traverse], aLegendColors[traverse]); x1 += legendFont->h; } } } #endif /* ST_WANT_GRAPHS */ #if defined(HAVE_BOUTELL_GD) /* ** pngSink ** ** GD callback, used to write out the png. */ int pngSink(void *aContext, const char *aBuffer, int aLen) { return PR_Write((PRFileDesc *) aContext, aBuffer, aLen); } #endif /* HAVE_BOUTELL_GD */ /* ** FormatNumber ** ** Formats a number with thousands separator. Don't free the result. Returns ** static data. */ char * FormatNumber(PRInt32 num) { static char buf[64]; char tmpbuf[64]; int len = 0; int bufindex = sizeof(buf) - 1; int mod3; PR_snprintf(tmpbuf, sizeof(tmpbuf), "%d", num); /* now insert the thousands separator */ mod3 = 0; len = strlen(tmpbuf); while (len >= 0) { if (tmpbuf[len] >= '0' && tmpbuf[len] <= '9') { if (mod3 == 3) { buf[bufindex--] = ','; mod3 = 0; } mod3++; } buf[bufindex--] = tmpbuf[len--]; } return buf + bufindex + 1; } /* ** actualByteSize ** ** Apply alignment and overhead to size to figure out actual byte size */ PRUint32 actualByteSize(STOptions * inOptions, PRUint32 retval) { /* ** Need to bump the result by our alignment and overhead. ** The idea here is that an allocation actually costs you more than you ** thought. ** ** The msvcrt malloc has an alignment of 16 with an overhead of 8. ** The win32 HeapAlloc has an alignment of 8 with an overhead of 8. */ if (0 != retval) { PRUint32 eval = 0; PRUint32 over = 0; eval = retval - 1; if (0 != inOptions->mAlignBy) { over = eval % inOptions->mAlignBy; } retval = eval + inOptions->mOverhead + inOptions->mAlignBy - over; } return retval; } /* ** byteSize ** ** Figuring the byte size of an allocation. ** Might expand in the future to report size at a given time. ** For now, just use last relevant event. */ PRUint32 byteSize(STOptions * inOptions, STAllocation * aAlloc) { PRUint32 retval = 0; if (NULL != aAlloc && 0 != aAlloc->mEventCount) { PRUint32 index = aAlloc->mEventCount; /* ** Generally, the size is the last event's size. */ do { index--; retval = aAlloc->mEvents[index].mHeapSize; } while (0 == retval && 0 != index); } return actualByteSize(inOptions, retval); } /* ** recalculateAllocationCost ** ** Given an allocation, does a recalculation of Cost - weight, heapcount etc. ** and does the right thing to propagate the cost upwards. */ int recalculateAllocationCost(STOptions * inOptions, STContext * inContext, STRun * aRun, STAllocation * aAllocation, PRBool updateParent) { /* ** Now, see if they desire a callsite update. ** As mentioned previously, we decide if the run desires us to ** manipulate the callsite data only if it's stamp is set. ** We change all callsites and parent callsites to have that ** stamp as well, so as to mark them as being relevant to ** the current run in question. */ if (NULL != inContext && 0 != aRun->mStats[inContext->mIndex].mStamp) { PRUint32 timeval = aAllocation->mMaxTimeval - aAllocation->mMinTimeval; PRUint32 size = byteSize(inOptions, aAllocation); PRUint64 weight64 = LL_INIT(0, 0); PRUint32 heapCost = aAllocation->mHeapRuntimeCost; PRUint64 timeval64 = LL_INIT(0, 0); PRUint64 size64 = LL_INIT(0, 0); LL_UI2L(timeval64, timeval); LL_UI2L(size64, size); LL_MUL(weight64, timeval64, size64); /* ** First, update this run. */ aRun->mStats[inContext->mIndex].mCompositeCount++; aRun->mStats[inContext->mIndex].mHeapRuntimeCost += heapCost; aRun->mStats[inContext->mIndex].mSize += size; LL_ADD(aRun->mStats[inContext->mIndex].mTimeval64, aRun->mStats[inContext->mIndex].mTimeval64, timeval64); LL_ADD(aRun->mStats[inContext->mIndex].mWeight64, aRun->mStats[inContext->mIndex].mWeight64, weight64); /* ** Use the first event of the allocation to update the parent ** callsites. ** This has positive effect of not updating realloc callsites ** with the same data over and over again. */ if (updateParent && 0 < aAllocation->mEventCount) { tmcallsite *callsite = aAllocation->mEvents[0].mCallsite; STRun *callsiteRun = NULL; /* ** Go up parents till we drop. */ while (NULL != callsite && NULL != callsite->method) { callsiteRun = CALLSITE_RUN(callsite); if (NULL != callsiteRun) { /* ** Do we init it? */ if (callsiteRun->mStats[inContext->mIndex].mStamp != aRun->mStats[inContext->mIndex].mStamp) { memset(&callsiteRun->mStats[inContext->mIndex], 0, sizeof(STCallsiteStats)); callsiteRun->mStats[inContext->mIndex].mStamp = aRun->mStats[inContext->mIndex].mStamp; } /* ** Add the values. ** Note that if the allocation was ever realloced, ** we are actually recording the final size. ** Also, the composite count does not include ** calls to realloc (or free for that matter), ** but rather is simply a count of actual heap ** allocation objects, from which someone will ** draw conclusions regarding number of malloc ** and free calls. ** It is possible to generate the exact number ** of calls to free/malloc/realloc should the ** absolute need arise to count them individually, ** but I fear it will take mucho memory and this ** is perhaps good enough for now. */ callsiteRun->mStats[inContext->mIndex].mCompositeCount++; callsiteRun->mStats[inContext->mIndex].mHeapRuntimeCost += heapCost; callsiteRun->mStats[inContext->mIndex].mSize += size; LL_ADD(callsiteRun->mStats[inContext->mIndex].mTimeval64, callsiteRun->mStats[inContext->mIndex].mTimeval64, timeval64); LL_ADD(callsiteRun->mStats[inContext->mIndex].mWeight64, callsiteRun->mStats[inContext->mIndex].mWeight64, weight64); } callsite = callsite->parent; } } } return 0; } /* ** appendAllocation ** ** Given a run, append the allocation to it. ** No DUP checks are done. ** Also, we might want to update the parent callsites with stats. ** We decide to do this heavy duty work only if the run we are appending ** to has a non ZERO mStats[].mStamp, meaning that it is asking to track ** such information when it was created. ** Returns !0 on success. */ int appendAllocation(STOptions * inOptions, STContext * inContext, STRun * aRun, STAllocation * aAllocation) { int retval = 0; if (NULL != aRun && NULL != aAllocation && NULL != inOptions) { STAllocation **expand = NULL; /* ** Expand the size of the array if needed. */ expand = (STAllocation **) realloc(aRun->mAllocations, sizeof(STAllocation *) * (aRun->mAllocationCount + 1)); if (NULL != expand) { /* ** Reassign in case of pointer move. */ aRun->mAllocations = expand; /* ** Stick the allocation in. */ aRun->mAllocations[aRun->mAllocationCount] = aAllocation; /* ** If this is the global run, we need to let the allocation ** track the index back to us. */ if (&globals.mRun == aRun) { aAllocation->mRunIndex = aRun->mAllocationCount; } /* ** Increase the count. */ aRun->mAllocationCount++; /* ** We're good. */ retval = __LINE__; /* ** update allocation cost */ recalculateAllocationCost(inOptions, inContext, aRun, aAllocation, PR_TRUE); } else { REPORT_ERROR(__LINE__, appendAllocation); } } else { REPORT_ERROR(__LINE__, appendAllocation); } return retval; } /* ** hasCallsiteMatch ** ** Determine if the callsite or the other callsites has the matching text. ** ** Returns 0 if there is no match. */ int hasCallsiteMatch(tmcallsite * aCallsite, const char *aMatch, int aDirection) { int retval = 0; if (NULL != aCallsite && NULL != aCallsite->method && NULL != aMatch && '\0' != *aMatch) { const char *methodName = NULL; do { methodName = tmmethodnode_name(aCallsite->method); if (NULL != methodName && NULL != strstr(methodName, aMatch)) { /* ** Contains the text. */ retval = __LINE__; break; } else { switch (aDirection) { case ST_FOLLOW_SIBLINGS: aCallsite = aCallsite->siblings; break; case ST_FOLLOW_PARENTS: aCallsite = aCallsite->parent; break; default: aCallsite = NULL; REPORT_ERROR(__LINE__, hasCallsiteMatch); break; } } } while (NULL != aCallsite && NULL != aCallsite->method); } else { REPORT_ERROR(__LINE__, hasCallsiteMatch); } return retval; } /* ** harvestRun ** ** Provide a simply way to go over a run, and yield the relevant allocations. ** The restrictions are easily set via the options page or the command ** line switches. ** ** On any match, add the allocation to the provided run. ** ** This makes it much easier for all the code to respect the options in ** force. ** ** Returns !0 on error, though aOutRun may contain a partial data set. */ int harvestRun(const STRun * aInRun, STRun * aOutRun, STOptions * aOptions, STContext * inContext) { int retval = 0; #if defined(DEBUG_dp) PRIntervalTime start = PR_IntervalNow(); fprintf(stderr, "DEBUG: harvesting run...\n"); #endif if (NULL != aInRun && NULL != aOutRun && aInRun != aOutRun && NULL != aOptions && NULL != inContext) { PRUint32 traverse = 0; STAllocation *current = NULL; for (traverse = 0; 0 == retval && traverse < aInRun->mAllocationCount; traverse++) { current = aInRun->mAllocations[traverse]; if (NULL != current) { PRUint32 lifetime = 0; PRUint32 bytesize = 0; PRUint64 weight64 = LL_INIT(0, 0); PRUint64 bytesize64 = LL_INIT(0, 0); PRUint64 lifetime64 = LL_INIT(0, 0); int appendRes = 0; int looper = 0; PRBool matched = PR_FALSE; /* ** Use this as an opportune time to fixup a memory ** leaked timeval, so as to not completely skew ** the weights. */ if (ST_TIMEVAL_MAX == current->mMaxTimeval) { current->mMaxTimeval = globals.mMaxTimeval; } /* ** Check allocation timeval restrictions. ** We have to slide the recorded timevals to be zero ** based, so that the comparisons make sense. */ if ((aOptions->mAllocationTimevalMin > (current->mMinTimeval - globals.mMinTimeval)) || (aOptions->mAllocationTimevalMax < (current->mMinTimeval - globals.mMinTimeval))) { continue; } /* ** Check timeval restrictions. ** We have to slide the recorded timevals to be zero ** based, so that the comparisons make sense. */ if ((aOptions->mTimevalMin > (current->mMinTimeval - globals.mMinTimeval)) || (aOptions->mTimevalMax < (current->mMinTimeval - globals.mMinTimeval))) { continue; } /* ** Check lifetime restrictions. */ lifetime = current->mMaxTimeval - current->mMinTimeval; if ((lifetime < aOptions->mLifetimeMin) || (lifetime > aOptions->mLifetimeMax)) { continue; } /* ** Check byte size restrictions. */ bytesize = byteSize(aOptions, current); if ((bytesize < aOptions->mSizeMin) || (bytesize > aOptions->mSizeMax)) { continue; } /* ** Check weight restrictions. */ LL_UI2L(bytesize64, bytesize); LL_UI2L(lifetime64, lifetime); LL_MUL(weight64, bytesize64, lifetime64); if (LL_UCMP(weight64, <, aOptions->mWeightMin64) || LL_UCMP(weight64, >, aOptions->mWeightMax64)) { continue; } /* ** Possibly restrict the callsite by text. ** Do this last, as it is a heavier check. ** ** One day, we may need to expand the logic to check for ** events beyond the initial allocation event. */ for (looper = 0; ST_SUBSTRING_MATCH_MAX > looper; looper++) { if ('\0' != aOptions->mRestrictText[looper][0]) { if (0 == hasCallsiteMatch(current->mEvents[0].mCallsite, aOptions->mRestrictText[looper], ST_FOLLOW_PARENTS)) { break; } } else { matched = PR_TRUE; break; } } if (ST_SUBSTRING_MATCH_MAX == looper) { matched = PR_TRUE; } if (PR_FALSE == matched) { continue; } /* ** You get here, we add to the run. */ appendRes = appendAllocation(aOptions, inContext, aOutRun, current); if (0 == appendRes) { retval = __LINE__; REPORT_ERROR(__LINE__, appendAllocation); } } } } #if defined(DEBUG_dp) fprintf(stderr, "DEBUG: harvesting ends: %dms [%d allocations]\n", PR_IntervalToMilliseconds(PR_IntervalNow() - start), aInRun->mAllocationCount); #endif return retval; } /* ** recalculateRunCost ** ** Goes over all allocations of a run and recalculates and propagates ** the allocation costs - weight, heapcount, size */ int recalculateRunCost(STOptions * inOptions, STContext * inContext, STRun * aRun) { PRUint32 traverse = 0; STAllocation *current = NULL; #if defined(DEBUG_dp) PRIntervalTime start = PR_IntervalNow(); fprintf(stderr, "DEBUG: recalculateRunCost...\n"); #endif if (NULL == aRun) return -1; /* reset stats of this run to 0 to begin recalculation */ memset(&aRun->mStats[inContext->mIndex], 0, sizeof(STCallsiteStats)); /* reset timestamp to force propogation of cost */ aRun->mStats[inContext->mIndex].mStamp = PR_IntervalNow(); for (traverse = 0; traverse < aRun->mAllocationCount; traverse++) { current = aRun->mAllocations[traverse]; if (NULL != current) { recalculateAllocationCost(inOptions, inContext, aRun, current, PR_TRUE); } } #if defined(DEBUG_dp) fprintf(stderr, "DEBUG: recalculateRunCost ends: %dms [%d allocations]\n", PR_IntervalToMilliseconds(PR_IntervalNow() - start), aRun->mAllocationCount); #endif return 0; } /* ** compareAllocations ** ** qsort callback. ** Compare the allocations as specified by the options. */ int compareAllocations(const void *aAlloc1, const void *aAlloc2, void *aContext) { int retval = 0; STOptions *inOptions = (STOptions *) aContext; if (NULL != aAlloc1 && NULL != aAlloc2 && NULL != inOptions) { STAllocation *alloc1 = *((STAllocation **) aAlloc1); STAllocation *alloc2 = *((STAllocation **) aAlloc2); if (NULL != alloc1 && NULL != alloc2) { /* ** Logic determined by pref/option. */ switch (inOptions->mOrderBy) { case ST_COUNT: /* ** "By count" on a single allocation means nothing, ** fall through to weight. */ case ST_WEIGHT: { PRUint64 weight164 = LL_INIT(0, 0); PRUint64 weight264 = LL_INIT(0, 0); PRUint64 bytesize164 = LL_INIT(0, 0); PRUint64 bytesize264 = LL_INIT(0, 0); PRUint64 timeval164 = LL_INIT(0, 0); PRUint64 timeval264 = LL_INIT(0, 0); LL_UI2L(bytesize164, byteSize(inOptions, alloc1)); LL_UI2L(timeval164, (alloc1->mMaxTimeval - alloc1->mMinTimeval)); LL_MUL(weight164, bytesize164, timeval164); LL_UI2L(bytesize264, byteSize(inOptions, alloc2)); LL_UI2L(timeval264, (alloc2->mMaxTimeval - alloc2->mMinTimeval)); LL_MUL(weight264, bytesize264, timeval264); if (LL_UCMP(weight164, <, weight264)) { retval = __LINE__; } else if (LL_UCMP(weight164, >, weight264)) { retval = -__LINE__; } } break; case ST_SIZE: { PRUint32 size1 = byteSize(inOptions, alloc1); PRUint32 size2 = byteSize(inOptions, alloc2); if (size1 < size2) { retval = __LINE__; } else if (size1 > size2) { retval = -__LINE__; } } break; case ST_TIMEVAL: { PRUint32 timeval1 = (alloc1->mMaxTimeval - alloc1->mMinTimeval); PRUint32 timeval2 = (alloc2->mMaxTimeval - alloc2->mMinTimeval); if (timeval1 < timeval2) { retval = __LINE__; } else if (timeval1 > timeval2) { retval = -__LINE__; } } break; case ST_HEAPCOST: { PRUint32 cost1 = alloc1->mHeapRuntimeCost; PRUint32 cost2 = alloc2->mHeapRuntimeCost; if (cost1 < cost2) { retval = __LINE__; } else if (cost1 > cost2) { retval = -__LINE__; } } break; default: { REPORT_ERROR(__LINE__, compareAllocations); } break; } } } return retval; } /* ** sortRun ** ** Given a run, sort it in the manner specified by the options. ** Returns !0 on failure. */ int sortRun(STOptions * inOptions, STRun * aRun) { int retval = 0; if (NULL != aRun && NULL != inOptions) { if (NULL != aRun->mAllocations && 0 < aRun->mAllocationCount) { NS_QuickSort(aRun->mAllocations, aRun->mAllocationCount, sizeof(STAllocation *), compareAllocations, inOptions); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, sortRun); } return retval; } /* ** createRun ** ** Returns a newly allocated run, properly initialized. ** Must call freeRun() with the new STRun. ** ** ONLY PASS IN A NON_ZERO STAMP IF YOU KNOW WHAT YOU ARE DOING!!! ** A non zero stamp in a run has side effects all over the ** callsites of the allocations added to the run and their ** parents. ** ** Returns NULL on failure. */ STRun * createRun(STContext * inContext, PRUint32 aStamp) { STRun *retval = NULL; retval = (STRun *) calloc(1, sizeof(STRun)); if (NULL != retval) { retval->mStats = (STCallsiteStats *) calloc(globals.mCommandLineOptions.mContexts, sizeof(STCallsiteStats)); if (NULL != retval->mStats) { if (NULL != inContext) { retval->mStats[inContext->mIndex].mStamp = aStamp; } } else { free(retval); retval = NULL; } } return retval; } /* ** freeRun ** ** Free off the run and the associated data. */ void freeRun(STRun * aRun) { if (NULL != aRun) { if (NULL != aRun->mAllocations) { /* ** We do not free the allocations themselves. ** They are likely pointed to by at least 2 other existing ** runs. */ free(aRun->mAllocations); aRun->mAllocations = NULL; } if (NULL != aRun->mStats) { free(aRun->mStats); aRun->mStats = NULL; } free(aRun); aRun = NULL; } } /* ** createRunFromGlobal ** ** Harvest the global run, then sort it. ** Returns NULL on failure. ** Must call freeRun() with the new STRun. */ STRun * createRunFromGlobal(STOptions * inOptions, STContext * inContext) { STRun *retval = NULL; if (NULL != inOptions && NULL != inContext) { /* ** We stamp the run. ** As things are appended to it, it realizes that it should stamp the ** callsite backtrace with the information as well. ** In this manner, we can provide meaningful callsite data. */ retval = createRun(inContext, PR_IntervalNow()); if (NULL != retval) { STCategoryNode *node = NULL; int failure = 0; int harvestRes = harvestRun(&globals.mRun, retval, inOptions, inContext); if (0 == harvestRes) { int sortRes = sortRun(inOptions, retval); if (0 != sortRes) { failure = __LINE__; } } else { failure = __LINE__; } if (0 != failure) { freeRun(retval); retval = NULL; REPORT_ERROR(failure, createRunFromGlobal); } /* ** Categorize the run. */ failure = categorizeRun(inOptions, inContext, retval, &globals); if (0 != failure) { REPORT_ERROR(__LINE__, categorizeRun); } /* ** if we are focussing on a category, return that run instead of ** the harvested run. Make sure to recalculate cost. */ node = findCategoryNode(inOptions->mCategoryName, &globals); if (node) { /* Recalculate cost of run */ recalculateRunCost(inOptions, inContext, node->runs[inContext->mIndex]); retval = node->runs[inContext->mIndex]; } } } else { REPORT_ERROR(__LINE__, createRunFromGlobal); } return retval; } /* ** getLiveAllocationByHeapID ** ** Go through a run and find the right heap ID. ** At the time of the call to this function, the allocation must be LIVE, ** meaning that it can not be freed. ** Go through the run backwards, in hopes of finding it near the end. ** ** Returns the allocation on success, otherwise NULL. */ STAllocation * getLiveAllocationByHeapID(STRun * aRun, PRUint32 aHeapID) { STAllocation *retval = NULL; if (NULL != aRun && 0 != aHeapID) { PRUint32 traverse = aRun->mAllocationCount; STAllocation *eval = NULL; /* ** Go through in reverse order. ** Stop when we have a return value. */ while (0 < traverse && NULL == retval) { /* ** Back up one to align with zero based index. */ traverse--; /* ** Take the pointer math out of further operations. */ eval = aRun->mAllocations[traverse]; /* ** Take a look at the events in reverse order. ** Basically the last event must NOT be a free. ** The last event must NOT be a realloc of size zero (free). ** Otherwise, try to match up the heapID of the event. */ if (0 != eval->mEventCount) { STAllocEvent *event = eval->mEvents + (eval->mEventCount - 1); switch (event->mEventType) { case TM_EVENT_FREE: { /* ** No freed allocation can match. */ } break; case TM_EVENT_REALLOC: case TM_EVENT_CALLOC: case TM_EVENT_MALLOC: { /* ** Heap IDs must match. */ if (aHeapID == event->mHeapID) { retval = eval; } } break; default: { REPORT_ERROR(__LINE__, getAllocationByHeapID); } break; } } } } else { REPORT_ERROR(__LINE__, getAllocationByHeapID); } return retval; } /* ** appendEvent ** ** Given an allocation, append a new event to it's lifetime. ** Returns the new event on success, otherwise NULL. */ STAllocEvent * appendEvent(STAllocation * aAllocation, PRUint32 aTimeval, char aEventType, PRUint32 aHeapID, PRUint32 aHeapSize, tmcallsite * aCallsite) { STAllocEvent *retval = NULL; if (NULL != aAllocation && NULL != aCallsite) { STAllocEvent *expand = NULL; /* ** Expand the allocation's event array. */ expand = (STAllocEvent *) realloc(aAllocation->mEvents, sizeof(STAllocEvent) * (aAllocation->mEventCount + 1)); if (NULL != expand) { /* ** Reassign in case of pointer move. */ aAllocation->mEvents = expand; /* ** Remove the pointer math from rest of code. */ retval = aAllocation->mEvents + aAllocation->mEventCount; /* ** Increase event array count. */ aAllocation->mEventCount++; /* ** Fill in the event. */ retval->mTimeval = aTimeval; retval->mEventType = aEventType; retval->mHeapID = aHeapID; retval->mHeapSize = aHeapSize; retval->mCallsite = aCallsite; /* ** Allocation may need to update idea of lifetime. ** See allocationTracker to see mMinTimeval inited to ST_TIMEVAL_MAX. */ if (aAllocation->mMinTimeval > aTimeval) { aAllocation->mMinTimeval = aTimeval; } /* ** This a free event? ** Can only set max timeval on a free. ** Otherwise, mMaxTimeval remains ST_TIMEVAL_MAX. ** Set in allocationTracker. */ if (TM_EVENT_FREE == aEventType) { aAllocation->mMaxTimeval = aTimeval; } } else { REPORT_ERROR(__LINE__, appendEvent); } } else { REPORT_ERROR(__LINE__, appendEvent); } return retval; } /* ** hasAllocation ** ** Determine if a given run has an allocation. ** This is really nothing more than a pointer comparison loop. ** Returns !0 if the run has the allocation. */ int hasAllocation(STRun * aRun, STAllocation * aTestFor) { int retval = 0; if (NULL != aRun && NULL != aTestFor) { PRUint32 traverse = aRun->mAllocationCount; /* ** Go through reverse, in the hopes it exists nearer the end. */ while (0 < traverse) { /* ** Back up. */ traverse--; if (aTestFor == aRun->mAllocations[traverse]) { retval = __LINE__; break; } } } else { REPORT_ERROR(__LINE__, hasAllocation); } return retval; } /* ** allocationTracker ** ** Important to keep track of all allocations unique so as to determine ** their lifetimes. ** ** Returns a pointer to the allocation on success. ** Return NULL on failure. */ STAllocation * allocationTracker(PRUint32 aTimeval, char aType, PRUint32 aHeapRuntimeCost, tmcallsite * aCallsite, PRUint32 aHeapID, PRUint32 aSize, tmcallsite * aOldCallsite, PRUint32 aOldHeapID, PRUint32 aOldSize) { STAllocation *retval = NULL; static int compactor = 1; const int frequency = 10000; PRUint32 actualSize, actualOldSize = 0; actualSize = actualByteSize(&globals.mCommandLineOptions, aSize); if (aOldSize) actualOldSize = actualByteSize(&globals.mCommandLineOptions, aOldSize); if (NULL != aCallsite) { int newAllocation = 0; tmcallsite *searchCallsite = NULL; PRUint32 searchHeapID = 0; STAllocation *allocation = NULL; /* ** Global operation ID increases. */ globals.mOperationCount++; /* ** Fix up the timevals if needed. */ if (aTimeval < globals.mMinTimeval) { globals.mMinTimeval = aTimeval; } if (aTimeval > globals.mMaxTimeval) { globals.mMaxTimeval = aTimeval; } switch (aType) { case TM_EVENT_FREE: { /* ** Update the global counter. */ globals.mFreeCount++; /* ** Update our peak memory used counter */ globals.mMemoryUsed -= actualSize; /* ** Not a new allocation, will need to search passed in site ** for the original allocation. */ searchCallsite = aCallsite; searchHeapID = aHeapID; } break; case TM_EVENT_MALLOC: { /* ** Update the global counter. */ globals.mMallocCount++; /* ** Update our peak memory used counter */ globals.mMemoryUsed += actualSize; if (globals.mMemoryUsed > globals.mPeakMemoryUsed) { globals.mPeakMemoryUsed = globals.mMemoryUsed; } /* ** This will be a new allocation. */ newAllocation = __LINE__; } break; case TM_EVENT_CALLOC: { /* ** Update the global counter. */ globals.mCallocCount++; /* ** Update our peak memory used counter */ globals.mMemoryUsed += actualSize; if (globals.mMemoryUsed > globals.mPeakMemoryUsed) { globals.mPeakMemoryUsed = globals.mMemoryUsed; } /* ** This will be a new allocation. */ newAllocation = __LINE__; } break; case TM_EVENT_REALLOC: { /* ** Update the global counter. */ globals.mReallocCount++; /* ** Update our peak memory used counter */ globals.mMemoryUsed += actualSize - actualOldSize; if (globals.mMemoryUsed > globals.mPeakMemoryUsed) { globals.mPeakMemoryUsed = globals.mMemoryUsed; } /* ** This might be a new allocation. */ if (NULL == aOldCallsite) { newAllocation = __LINE__; } else { /* ** Need to search for the original callsite for the ** index to the allocation. */ searchCallsite = aOldCallsite; searchHeapID = aOldHeapID; } } break; default: { REPORT_ERROR(__LINE__, allocationTracker); } break; } /* ** We are either modifying an existing allocation or we are creating ** a new one. */ if (0 != newAllocation) { allocation = (STAllocation *) calloc(1, sizeof(STAllocation)); if (NULL != allocation) { /* ** Fixup the min timeval so if logic later will just work. */ allocation->mMinTimeval = ST_TIMEVAL_MAX; allocation->mMaxTimeval = ST_TIMEVAL_MAX; } } else if (NULL != searchCallsite && NULL != CALLSITE_RUN(searchCallsite) && 0 != searchHeapID) { /* ** We know what to search for, and we reduce what we search ** by only looking for those allocations at a known callsite. */ allocation = getLiveAllocationByHeapID(CALLSITE_RUN(searchCallsite), searchHeapID); } else { REPORT_ERROR(__LINE__, allocationTracker); } if (NULL != allocation) { STAllocEvent *appendResult = NULL; /* ** Record the amount of time this allocation event took. */ allocation->mHeapRuntimeCost += aHeapRuntimeCost; /* ** Now that we have an allocation, we need to make sure it has ** the proper event. */ appendResult = appendEvent(allocation, aTimeval, aType, aHeapID, aSize, aCallsite); if (NULL != appendResult) { if (0 != newAllocation) { int runAppendResult = 0; int callsiteAppendResult = 0; /* ** A new allocation needs to be added to the global run. ** A new allocation needs to be added to the callsite. */ runAppendResult = appendAllocation(&globals.mCommandLineOptions, NULL, &globals.mRun, allocation); callsiteAppendResult = appendAllocation(&globals.mCommandLineOptions, NULL, CALLSITE_RUN(aCallsite), allocation); if (0 != runAppendResult && 0 != callsiteAppendResult) { /* ** Success. */ retval = allocation; } else { REPORT_ERROR(__LINE__, appendAllocation); } } else { /* ** An existing allocation, if a realloc situation, ** may need to be added to the new callsite. ** This can only occur if the new and old callsites ** differ. ** Even then, a brute force check will need to be made ** to ensure the allocation was not added twice; ** consider a realloc scenario where two different ** call stacks bump the allocation back and forth. */ if (aCallsite != searchCallsite) { int found = 0; found = hasAllocation(CALLSITE_RUN(aCallsite), allocation); if (0 == found) { int appendResult = 0; appendResult = appendAllocation(&globals.mCommandLineOptions, NULL, CALLSITE_RUN(aCallsite), allocation); if (0 != appendResult) { /* ** Success. */ retval = allocation; } else { REPORT_ERROR(__LINE__, appendAllocation); } } else { /* ** Already there. */ retval = allocation; } } else { /* ** Success. */ retval = allocation; } } } else { REPORT_ERROR(__LINE__, appendEvent); } } else { REPORT_ERROR(__LINE__, allocationTracker); } } else { REPORT_ERROR(__LINE__, allocationTracker); } /* ** Compact the heap a bit if you can. */ compactor++; if (0 == (compactor % frequency)) { heapCompact(); } return retval; } /* ** trackEvent ** ** An allocation event has dropped in on us. ** We need to do the right thing and track it. */ void trackEvent(PRUint32 aTimeval, char aType, PRUint32 aHeapRuntimeCost, tmcallsite * aCallsite, PRUint32 aHeapID, PRUint32 aSize, tmcallsite * aOldCallsite, PRUint32 aOldHeapID, PRUint32 aOldSize) { if (NULL != aCallsite) { /* ** Verify the old callsite just in case. */ if (NULL != CALLSITE_RUN(aCallsite) && (NULL == aOldCallsite || NULL != CALLSITE_RUN(aOldCallsite))) { STAllocation *allocation = NULL; /* ** Add to the allocation tracking code. */ allocation = allocationTracker(aTimeval, aType, aHeapRuntimeCost, aCallsite, aHeapID, aSize, aOldCallsite, aOldHeapID, aOldSize); if (NULL == allocation) { REPORT_ERROR(__LINE__, allocationTracker); } } else { REPORT_ERROR(__LINE__, trackEvent); } } else { REPORT_ERROR(__LINE__, trackEvent); } } /* ** tmEventHandler ** ** Callback from the tmreader_eventloop function. ** Simply tries to sort out what we desire to know. */ static const char spinner_chars[] = { '/', '-', '\\', '|' }; #define SPINNER_UPDATE_FREQUENCY 4096 #define SPINNER_CHAR_COUNT (sizeof(spinner_chars) / sizeof(spinner_chars[0])) #define SPINNER_CHAR(_x) spinner_chars[(_x / SPINNER_UPDATE_FREQUENCY) % SPINNER_CHAR_COUNT] void tmEventHandler(tmreader * aReader, tmevent * aEvent) { static event_count = 0; /* for spinner */ if ((event_count++ % SPINNER_UPDATE_FREQUENCY) == 0) printf("\rReading... %c", SPINNER_CHAR(event_count)); if (NULL != aReader && NULL != aEvent) { switch (aEvent->type) { /* ** Events we ignore. */ case TM_EVENT_LIBRARY: case TM_EVENT_METHOD: case TM_EVENT_STATS: case TM_EVENT_TIMESTAMP: case TM_EVENT_FILENAME: break; /* ** Allocation events need to be tracked. */ case TM_EVENT_MALLOC: case TM_EVENT_CALLOC: case TM_EVENT_REALLOC: case TM_EVENT_FREE: { PRUint32 oldptr = 0; PRUint32 oldsize = 0; tmcallsite *callsite = NULL; tmcallsite *oldcallsite = NULL; if (TM_EVENT_REALLOC == aEvent->type) { /* ** Only care about old arguments if there were any. */ if (0 != aEvent->u.alloc.oldserial) { oldptr = aEvent->u.alloc.oldptr; oldsize = aEvent->u.alloc.oldsize; oldcallsite = tmreader_callsite(aReader, aEvent->u.alloc.oldserial); if (NULL == oldcallsite) { REPORT_ERROR(__LINE__, tmreader_callsite); } } } callsite = tmreader_callsite(aReader, aEvent->serial); if (NULL != callsite) { /* ** Verify a callsite run is there. ** If not, we are ignoring this callsite. */ if (NULL != CALLSITE_RUN(callsite)) { char eventType = aEvent->type; PRUint32 eventSize = aEvent->u.alloc.size; /* ** Play a nasty trick on reallocs of size zero. ** They are to become free events, adjust the size accordingly. ** This allows me to avoid all types of special case code. */ if (0 == aEvent->u.alloc.size && TM_EVENT_REALLOC == aEvent->type) { eventType = TM_EVENT_FREE; if (0 != aEvent->u.alloc.oldserial) { eventSize = aEvent->u.alloc.oldsize; } } trackEvent(ticks2msec (aReader, aEvent->u.alloc.interval), eventType, ticks2usec(aReader, aEvent->u.alloc. cost), callsite, aEvent->u.alloc.ptr, eventSize, oldcallsite, oldptr, oldsize); } } else { REPORT_ERROR(__LINE__, tmreader_callsite); } } break; /* ** Callsite, set up the callsite run if it does not exist. */ case TM_EVENT_CALLSITE: { tmcallsite *callsite = tmreader_callsite(aReader, aEvent->serial); if (NULL != callsite) { if (NULL == CALLSITE_RUN(callsite)) { int createrun = __LINE__; #if defined(MOZILLA_CLIENT) /* ** For a mozilla spacetrace, ignore this particular ** callsite as it is just noise, and causes us to ** use a lot of memory. ** ** This callsite is present on the linux build, ** not sure if the other platforms have it. */ if (0 != hasCallsiteMatch(callsite, "g_main_is_running", ST_FOLLOW_PARENTS)) { createrun = 0; } #endif /* MOZILLA_CLIENT */ if (0 != createrun) { callsite->data = createRun(NULL, 0); } } } else { REPORT_ERROR(__LINE__, tmreader_callsite); } } break; /* ** Unhandled events should not be allowed. */ default: { REPORT_ERROR(__LINE__, tmEventHandler); } break; } } } /* ** optionGetDataOut ** ** Output option get data. */ void optionGetDataOut(PRFileDesc * inFD, STOptions * inOptions) { if (NULL != inFD && NULL != inOptions) { int mark = 0; #define ST_WEB_OPTION_BOOL(option_name, option_genre, option_help) \ PR_fprintf(inFD, "%s%s=%d", (0 == mark++) ? "?" : "&", #option_name, inOptions->m##option_name); #define ST_WEB_OPTION_STRING(option_name, option_genre, default_value, option_help) \ PR_fprintf(inFD, "%s%s=%s", (0 == mark++) ? "?" : "&", #option_name, inOptions->m##option_name); #define ST_WEB_OPTION_STRING_ARRAY(option_name, option_genre, array_size, option_help) \ { \ PRUint32 loop = 0; \ \ for(loop = 0; loop < array_size; loop++) \ { \ PR_fprintf(inFD, "%s%s=%s", (0 == mark++) ? "?" : "&", #option_name, inOptions->m##option_name[loop]); \ } \ } #define ST_WEB_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help) /* no implementation */ #define ST_WEB_OPTION_UINT32(option_name, option_genre, default_value, multiplier, option_help) \ PR_fprintf(inFD, "%s%s=%u", (0 == mark++) ? "?" : "&", #option_name, inOptions->m##option_name / multiplier); #define ST_WEB_OPTION_UINT64(option_name, option_genre, default_value, multiplier, option_help) \ { \ PRUint64 def64 = default_value; \ PRUint64 mul64 = multiplier; \ PRUint64 div64; \ \ LL_DIV(div64, inOptions->m##option_name##64, mul64); \ PR_fprintf(inFD, "%s%s=%llu", (0 == mark++) ? "?" : "&", #option_name, div64); \ } #include "stoptions.h" } } /* ** htmlAnchor ** ** Output an HTML anchor, or just the text depending on the mode. */ void htmlAnchor(STRequest * inRequest, const char *aHref, const char *aText, const char *aTarget, const char *aClass, STOptions * inOptions) { if (NULL != aHref && '\0' != *aHref && NULL != aText && '\0' != *aText) { int anchorLive = 1; /* ** In batch mode, we need to verify the anchor is live. */ if (0 != inRequest->mOptions.mBatchRequestCount) { PRUint32 loop = 0; int comparison = 1; for (loop = 0; loop < inRequest->mOptions.mBatchRequestCount; loop++) { comparison = strcmp(aHref, inRequest->mOptions.mBatchRequest[loop]); if (0 == comparison) { break; } } /* ** Did we find it? */ if (0 == comparison) { anchorLive = 0; } } /* ** In any mode, don't make an href to the current page. */ if (0 != anchorLive && NULL != inRequest->mGetFileName) { if (0 == strcmp(aHref, inRequest->mGetFileName)) { anchorLive = 0; } } /* ** Do the right thing. */ if (0 != anchorLive) { PR_fprintf(inRequest->mFD, "mFD, "target=\"%s\" ", aTarget); } PR_fprintf(inRequest->mFD, "href=\"./%s", aHref); /* ** The options, if desired, get appended as form data. */ optionGetDataOut(inRequest->mFD, inOptions); PR_fprintf(inRequest->mFD, "\">%s\n", aText); } else { PR_fprintf(inRequest->mFD, "%s\n", aClass, aText); } } else { REPORT_ERROR(__LINE__, htmlAnchor); } } /* ** htmlAllocationAnchor ** ** Output an html achor that will resolve to the allocation in question. */ void htmlAllocationAnchor(STRequest * inRequest, STAllocation * aAllocation, const char *aText) { if (NULL != aAllocation && NULL != aText && '\0' != *aText) { char buffer[128]; /* ** This is a total hack. ** The filename contains the index of the allocation in globals.mRun. ** Safer than using the raw pointer value.... */ PR_snprintf(buffer, sizeof(buffer), "allocation_%u.html", aAllocation->mRunIndex); htmlAnchor(inRequest, buffer, aText, NULL, "allocation", &inRequest->mOptions); } else { REPORT_ERROR(__LINE__, htmlAllocationAnchor); } } /* ** resolveSourceFile ** ** Easy way to get a readable/short name. ** NULL if not present, not resolvable. */ const char * resolveSourceFile(tmmethodnode * aMethod) { const char *retval = NULL; if (NULL != aMethod) { const char *methodSays = NULL; methodSays = aMethod->sourcefile; if (NULL != methodSays && '\0' != methodSays[0] && 0 != strcmp("noname", methodSays)) { retval = strrchr(methodSays, '/'); if (NULL != retval) { retval++; } else { retval = methodSays; } } } return retval; } /* ** htmlCallsiteAnchor ** ** Output an html anchor that will resolve to the callsite in question. ** If no text is provided, we provide our own. ** ** RealName determines whether or not we crawl our parents until the point ** we no longer match stats. */ void htmlCallsiteAnchor(STRequest * inRequest, tmcallsite * aCallsite, const char *aText, int aRealName) { if (NULL != aCallsite) { char textBuf[512]; char hrefBuf[128]; tmcallsite *namesite = aCallsite; /* ** Should we use a different name? */ if (0 == aRealName && NULL != namesite->parent && NULL != namesite->parent->method) { STRun *myRun = NULL; STRun *upRun = NULL; do { myRun = CALLSITE_RUN(namesite); upRun = CALLSITE_RUN(namesite->parent); if (0 != memcmp(&myRun->mStats[inRequest->mContext->mIndex], &upRun->mStats[inRequest->mContext->mIndex], sizeof(STCallsiteStats))) { /* ** Doesn't match, stop. */ break; } else { /* ** Matches, keep going up. */ namesite = namesite->parent; } } while (NULL != namesite->parent && NULL != namesite->parent->method); } /* ** If no text, provide our own. */ if (NULL == aText || '\0' == *aText) { const char *methodName = NULL; const char *sourceFile = NULL; if (NULL != namesite->method) { methodName = tmmethodnode_name(namesite->method); } else { methodName = "==NONAME=="; } /* ** Decide which format to use to identify the callsite. ** If we can detect availability, hook up the filename with lxr information. */ sourceFile = resolveSourceFile(namesite->method); if (NULL != sourceFile && 0 == strncmp("mozilla/", namesite->method->sourcefile, 8)) { char lxrHREFBuf[512]; PR_snprintf(lxrHREFBuf, sizeof(lxrHREFBuf), " [%s:%u]", namesite->method->sourcefile + 8, namesite->method->linenumber, sourceFile, namesite->method->linenumber); PR_snprintf(textBuf, sizeof(textBuf), "%s%s", methodName, lxrHREFBuf); } else if (NULL != sourceFile) { PR_snprintf(textBuf, sizeof(textBuf), "%s [%s:%u]", methodName, sourceFile, namesite->method->linenumber); } else { PR_snprintf(textBuf, sizeof(textBuf), "%s [+%u(%u)]", methodName, namesite->offset, (PRUint32) namesite->entry.key); } aText = textBuf; } PR_snprintf(hrefBuf, sizeof(hrefBuf), "callsite_%u.html", (PRUint32) aCallsite->entry.key); htmlAnchor(inRequest, hrefBuf, aText, NULL, "callsite", &inRequest->mOptions); } else { REPORT_ERROR(__LINE__, htmlCallsiteAnchor); } } /* ** htmlHeader ** ** Output a standard header in the report files. */ void htmlHeader(STRequest * inRequest, const char *aTitle) { PR_fprintf(inRequest->mFD, "\n" "\n" "%s\n" "\n" "\n" "
\n" "Spacetrace" "\n" "Category:\n" "%s\n", aTitle, inRequest->mOptions.mCategoryName); PR_fprintf(inRequest->mFD, ""); htmlAnchor(inRequest, "index.html", "Index", NULL, "header-menuitem", &inRequest->mOptions); PR_fprintf(inRequest->mFD, "\n"); PR_fprintf(inRequest->mFD, ""); htmlAnchor(inRequest, "options.html", "Options", NULL, "header-menuitem", &inRequest->mOptions); PR_fprintf(inRequest->mFD, "\n"); PR_fprintf(inRequest->mFD, "\n"); /* class=navigate */ PR_fprintf(inRequest->mFD, "
\n\n
\n\n"); } /* ** htmlFooter ** ** Output a standard footer in the report file. */ void htmlFooter(STRequest * inRequest) { PR_fprintf(inRequest->mFD, "
\n\n" "
\n" "SpaceTrace\n" "
\n\n" "\n" "\n"); } /* ** htmlNotFound ** ** Not found message. */ void htmlNotFound(STRequest * inRequest) { htmlHeader(inRequest, "File Not Found"); PR_fprintf(inRequest->mFD, "File Not Found\n"); htmlFooter(inRequest); } void htmlStartTable(STRequest* inRequest, const char* table_class, const char* id, const char* caption, const char * const headers[], PRUint32 header_length) { PRUint32 i; PR_fprintf(inRequest->mFD, "
\n" " " " \n" " \n", id, table_class ? table_class : "", caption); for (i=0; i< header_length; i++) PR_fprintf(inRequest->mFD, " \n", headers[i]); PR_fprintf(inRequest->mFD, " \n"); } /* ** callsiteArrayFromCallsite ** ** Simply return an array of the callsites divulged from the site passed in, ** including the site passed in. ** Do not worry about dups, or the order of the items. ** ** Returns the number of items in the array. ** If the same as aExistingCount, then nothing happened. */ PRUint32 callsiteArrayFromCallsite(tmcallsite *** aArray, PRUint32 aExistingCount, tmcallsite * aSite, int aFollow) { PRUint32 retval = 0; if (NULL != aArray && NULL != aSite) { tmcallsite **expand = NULL; /* ** If we have an existing count, we just keep expanding this. */ retval = aExistingCount; /* ** Go through every allocation. */ do { /* ** expand the array. */ expand = (tmcallsite **) realloc(*aArray, sizeof(tmcallsite *) * (retval + 1)); if (NULL != expand) { /* ** Set the callsite in case of pointer move. */ *aArray = expand; /* ** Assign the value. */ (*aArray)[retval] = aSite; retval++; } else { REPORT_ERROR(__LINE__, realloc); break; } /* ** What do we follow? */ switch (aFollow) { case ST_FOLLOW_SIBLINGS: aSite = aSite->siblings; break; case ST_FOLLOW_PARENTS: aSite = aSite->parent; break; default: aSite = NULL; REPORT_ERROR(__LINE__, callsiteArrayFromCallsite); break; } } while (NULL != aSite && NULL != aSite->method); } return retval; } /* ** callsiteArrayFromRun ** ** Simply return an array of the callsites from the run allocations. ** We only pay attention to callsites that were not free callsites. ** Do not worry about dups, or the order of the items. ** ** Returns the number of items in the array. ** If the same as aExistingCount, then nothing happened. */ PRUint32 callsiteArrayFromRun(tmcallsite *** aArray, PRUint32 aExistingCount, STRun * aRun) { PRUint32 retval = 0; if (NULL != aArray && NULL != aRun && 0 < aRun->mAllocationCount) { PRUint32 allocLoop = 0; PRUint32 eventLoop = 0; int stopLoops = 0; /* ** If we have an existing count, we just keep expanding this. */ retval = aExistingCount; /* ** Go through every allocation. */ for (allocLoop = 0; 0 == stopLoops && allocLoop < aRun->mAllocationCount; allocLoop++) { /* ** Go through every event. */ for (eventLoop = 0; 0 == stopLoops && eventLoop < aRun->mAllocations[allocLoop]->mEventCount; eventLoop++) { /* ** Skip the free events. */ if (TM_EVENT_FREE != aRun->mAllocations[allocLoop]->mEvents[eventLoop]. mEventType) { tmcallsite **expand = NULL; /* ** expand the array. */ expand = (tmcallsite **) realloc(*aArray, sizeof(tmcallsite *) * (retval + 1)); if (NULL != expand) { /* ** Set the callsite in case of pointer move. */ *aArray = expand; /* ** Assign the value. */ (*aArray)[retval] = aRun->mAllocations[allocLoop]->mEvents[eventLoop]. mCallsite; retval++; } else { REPORT_ERROR(__LINE__, realloc); stopLoops = __LINE__; } } } } } return retval; } /* ** getDataPRUint* ** ** Helper to avoid cut and paste code. ** Failure to find aCheckFor does not mean failure. ** In case of dups, specify an index on non "1" to get others. ** Do not touch storage space unless a find is made. ** Returns !0 on failure. */ int getDataPRUint32Base(const FormData * aGetData, const char *aCheckFor, int inIndex, void *aStoreResult, PRUint32 aBits) { int retval = 0; if (NULL != aGetData && NULL != aCheckFor && 0 != inIndex && NULL != aStoreResult) { unsigned finder = 0; /* ** Loop over the names, looking for an exact string match. ** Skip over initial finds, decrementing inIndex, until "1". */ for (finder = 0; finder < aGetData->mNVCount; finder++) { if (0 == strcmp(aCheckFor, aGetData->mNArray[finder])) { inIndex--; if (0 == inIndex) { PRInt32 scanRes = 0; if (64 == aBits) { scanRes = PR_sscanf(aGetData->mVArray[finder], "%llu", aStoreResult); } else { scanRes = PR_sscanf(aGetData->mVArray[finder], "%u", aStoreResult); } if (1 != scanRes) { retval = __LINE__; REPORT_ERROR(__LINE__, PR_sscanf); } break; } } } } else { retval = __LINE__; REPORT_ERROR(__LINE__, getDataPRUint32Base); } return retval; } int getDataPRUint32(const FormData * aGetData, const char *aCheckFor, int inIndex, PRUint32 * aStoreResult, PRUint32 aConversion) { int retval = 0; retval = getDataPRUint32Base(aGetData, aCheckFor, inIndex, aStoreResult, 32); *aStoreResult *= aConversion; return retval; } int getDataPRUint64(const FormData * aGetData, const char *aCheckFor, int inIndex, PRUint64 * aStoreResult64, PRUint64 aConversion64) { int retval = 0; PRUint64 value64 = LL_INIT(0, 0); retval = getDataPRUint32Base(aGetData, aCheckFor, inIndex, &value64, 64); LL_MUL(*aStoreResult64, value64, aConversion64); return retval; } /* ** getDataString ** ** Pull out the string data, if specified. ** In case of dups, specify an index on non "1" to get others. ** Do not touch storage space unless a find is made. ** Return !0 on failure. */ int getDataString(const FormData * aGetData, const char *aCheckFor, int inIndex, char *aStoreResult, int inStoreResultLength) { int retval = 0; if (NULL != aGetData && NULL != aCheckFor && 0 != inIndex && NULL != aStoreResult && 0 != inStoreResultLength) { unsigned finder = 0; /* ** Loop over the names, looking for an exact string match. ** Skip over initial finds, decrementing inIndex, until "1". */ for (finder = 0; finder < aGetData->mNVCount; finder++) { if (0 == strcmp(aCheckFor, aGetData->mNArray[finder])) { inIndex--; if (0 == inIndex) { PR_snprintf(aStoreResult, inStoreResultLength, "%s", aGetData->mVArray[finder]); break; } } } } else { retval = __LINE__; REPORT_ERROR(__LINE__, getDataPRUint32); } return retval; } /* ** displayTopAllocations ** ** Present the top allocations. ** The run must be passed in, and it must be pre-sorted. ** ** Returns !0 on failure. */ int displayTopAllocations(STRequest * inRequest, STRun * aRun, const char* id, const char* caption, int aWantCallsite) { int retval = 0; if (NULL != aRun) { if (0 < aRun->mAllocationCount) { PRUint32 loop = 0; STAllocation *current = NULL; static const char* const headers[] = { "Rank", "Index", "Byte Size", "Lifespan (sec)", "Weight", "Heap Op (sec)" }; static const char* const headers_callsite[] = { "Rank", "Index", "Byte Size", "Lifespan (sec)", "Weight", "Heap Op (sec)", "Origin Callsite" }; if (aWantCallsite) htmlStartTable(inRequest, NULL, id, caption, headers_callsite, sizeof(headers_callsite) / sizeof(headers_callsite[0])); else htmlStartTable(inRequest, NULL, id, caption, headers, sizeof(headers) / sizeof(headers[0])); /* ** Loop over the items, up to some limit or until the end. */ for (loop = 0; loop < inRequest->mOptions.mListItemMax && loop < aRun->mAllocationCount; loop++) { current = aRun->mAllocations[loop]; if (NULL != current) { PRUint32 lifespan = current->mMaxTimeval - current->mMinTimeval; PRUint32 size = byteSize(&inRequest->mOptions, current); PRUint32 heapCost = current->mHeapRuntimeCost; PRUint64 weight64 = LL_INIT(0, 0); PRUint64 size64 = LL_INIT(0, 0); PRUint64 lifespan64 = LL_INIT(0, 0); char buffer[32]; LL_UI2L(size64, size); LL_UI2L(lifespan64, lifespan); LL_MUL(weight64, size64, lifespan64); PR_fprintf(inRequest->mFD, "\n"); /* ** Rank. */ PR_fprintf(inRequest->mFD, "\n", loop + 1); /* ** Index. */ PR_snprintf(buffer, sizeof(buffer), "%u", current->mRunIndex); PR_fprintf(inRequest->mFD, "\n"); /* ** Byte Size. */ PR_fprintf(inRequest->mFD, "\n", size); /* ** Lifespan. */ PR_fprintf(inRequest->mFD, "\n", ST_TIMEVAL_PRINTABLE(lifespan)); /* ** Weight. */ PR_fprintf(inRequest->mFD, "\n", weight64); /* ** Heap operation cost. */ PR_fprintf(inRequest->mFD, "\n", ST_MICROVAL_PRINTABLE(heapCost)); if (0 != aWantCallsite) { /* ** Callsite. */ PR_fprintf(inRequest->mFD, "\n"); } PR_fprintf(inRequest->mFD, "\n"); } } PR_fprintf(inRequest->mFD, "\n
%s
%s
%u\n"); htmlAllocationAnchor(inRequest, current, buffer); PR_fprintf(inRequest->mFD, "%u" ST_TIMEVAL_FORMAT "%llu" ST_MICROVAL_FORMAT ""); htmlCallsiteAnchor(inRequest, current->mEvents[0].mCallsite, NULL, 0); PR_fprintf(inRequest->mFD, "
\n\n"); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, displayTopAllocations); } return retval; } /* ** displayMemoryLeaks ** ** Present the top memory leaks. ** The run must be passed in, and it must be pre-sorted. ** ** Returns !0 on failure. */ int displayMemoryLeaks(STRequest * inRequest, STRun * aRun) { int retval = 0; if (NULL != aRun) { PRUint32 loop = 0; PRUint32 displayed = 0; STAllocation *current = NULL; static const char * headers[] = { "Rank", "Index", "Byte Size", "Lifespan (sec)", "Weight", "Heap Op (sec)", "Origin Callsite" }; htmlStartTable(inRequest, NULL, "memory-leaks", "Memory Leaks", headers, sizeof(headers) / sizeof(headers[0])); /* ** Loop over all of the items, or until we've displayed enough. */ for (loop = 0; displayed < inRequest->mOptions.mListItemMax && loop < aRun->mAllocationCount; loop++) { current = aRun->mAllocations[loop]; if (NULL != current && 0 != current->mEventCount) { /* ** In order to be a leak, the last event of it's life must ** NOT be a free operation. ** ** A free operation is just that, a free. */ if (TM_EVENT_FREE != current->mEvents[current->mEventCount - 1].mEventType) { PRUint32 lifespan = current->mMaxTimeval - current->mMinTimeval; PRUint32 size = byteSize(&inRequest->mOptions, current); PRUint32 heapCost = current->mHeapRuntimeCost; PRUint64 weight64 = LL_INIT(0, 0); PRUint64 size64 = LL_INIT(0, 0); PRUint64 lifespan64 = LL_INIT(0, 0); char buffer[32]; LL_UI2L(size64, size); LL_UI2L(lifespan64, lifespan); LL_MUL(weight64, size64, lifespan64); /* ** One more shown. */ displayed++; PR_fprintf(inRequest->mFD, "\n"); /* ** Rank. */ PR_fprintf(inRequest->mFD, "%u\n", displayed); /* ** Index. */ PR_snprintf(buffer, sizeof(buffer), "%u", current->mRunIndex); PR_fprintf(inRequest->mFD, "\n"); htmlAllocationAnchor(inRequest, current, buffer); PR_fprintf(inRequest->mFD, "\n"); /* ** Byte Size. */ PR_fprintf(inRequest->mFD, "%u\n", size); /* ** Lifespan. */ PR_fprintf(inRequest->mFD, "" ST_TIMEVAL_FORMAT "\n", ST_TIMEVAL_PRINTABLE(lifespan)); /* ** Weight. */ PR_fprintf(inRequest->mFD, "%llu\n", weight64); /* ** Heap Operation Seconds. */ PR_fprintf(inRequest->mFD, "" ST_MICROVAL_FORMAT "\n", ST_MICROVAL_PRINTABLE(heapCost)); /* ** Callsite. */ PR_fprintf(inRequest->mFD, ""); htmlCallsiteAnchor(inRequest, current->mEvents[0].mCallsite, NULL, 0); PR_fprintf(inRequest->mFD, "\n"); PR_fprintf(inRequest->mFD, "\n"); } } } PR_fprintf(inRequest->mFD, "\n\n"); } else { retval = __LINE__; REPORT_ERROR(__LINE__, displayMemoryLeaks); } return retval; } /* ** displayCallsites ** ** Display a table of callsites. ** If the stamp is non zero, then must match that stamp. ** If the stamp is zero, then must match the global sorted run stamp. ** Return !0 on error. */ int displayCallsites(STRequest * inRequest, tmcallsite * aCallsite, int aFollow, PRUint32 aStamp, const char* id, const char* caption, int aRealNames) { int retval = 0; if (NULL != aCallsite && NULL != aCallsite->method) { int headerDisplayed = 0; STRun *run = NULL; /* ** Correct the stamp if need be. */ if (0 == aStamp && NULL != inRequest->mContext->mSortedRun) { aStamp = inRequest->mContext->mSortedRun->mStats[inRequest->mContext-> mIndex].mStamp; } /* ** Loop over the callsites looking for a stamp match. ** A stamp guarantees there is something interesting to look at too. ** If found, output it. */ while (NULL != aCallsite && NULL != aCallsite->method) { run = CALLSITE_RUN(aCallsite); if (NULL != run) { if (aStamp == run->mStats[inRequest->mContext->mIndex].mStamp) { /* ** We got a header? */ if (0 == headerDisplayed) { static const char* const headers[] = { "Callsite", "C. Size", "C. Seconds", "C. Weight", "H.O. Count", "C.H. Operation (sec)" }; headerDisplayed = __LINE__; htmlStartTable(inRequest, NULL, id, caption, headers, sizeof(headers)/sizeof(headers[0])); } /* ** Output the information. */ PR_fprintf(inRequest->mFD, "\n"); /* ** Method name. */ PR_fprintf(inRequest->mFD, ""); htmlCallsiteAnchor(inRequest, aCallsite, NULL, aRealNames); PR_fprintf(inRequest->mFD, ""); /* ** Byte Size. */ PR_fprintf(inRequest->mFD, "%u\n", run->mStats[inRequest->mContext->mIndex]. mSize); /* ** Seconds. */ PR_fprintf(inRequest->mFD, "" ST_TIMEVAL_FORMAT "\n", ST_TIMEVAL_PRINTABLE64(run-> mStats[inRequest-> mContext-> mIndex]. mTimeval64)); /* ** Weight. */ PR_fprintf(inRequest->mFD, "%llu\n", run->mStats[inRequest->mContext->mIndex]. mWeight64); /* ** Allocation object count. */ PR_fprintf(inRequest->mFD, "%u\n", run->mStats[inRequest->mContext->mIndex]. mCompositeCount); /* ** Heap Operation Seconds. */ PR_fprintf(inRequest->mFD, "" ST_MICROVAL_FORMAT "\n", ST_MICROVAL_PRINTABLE(run-> mStats[inRequest-> mContext->mIndex]. mHeapRuntimeCost)); PR_fprintf(inRequest->mFD, "\n"); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, displayCallsites); break; } /* ** What do we follow? */ switch (aFollow) { case ST_FOLLOW_SIBLINGS: aCallsite = aCallsite->siblings; break; case ST_FOLLOW_PARENTS: aCallsite = aCallsite->parent; break; default: aCallsite = NULL; retval = __LINE__; REPORT_ERROR(__LINE__, displayCallsites); break; } } /* ** Terminate the table if we should. */ if (0 != headerDisplayed) { PR_fprintf(inRequest->mFD, "\n\n"); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, displayCallsites); } return retval; } /* ** displayAllocationDetails ** ** Report what we know about the allocation. ** ** Returns !0 on error. */ int displayAllocationDetails(STRequest * inRequest, STAllocation * aAllocation) { int retval = 0; if (NULL != aAllocation) { PRUint32 traverse = 0; PRUint32 bytesize = byteSize(&inRequest->mOptions, aAllocation); PRUint32 timeval = aAllocation->mMaxTimeval - aAllocation->mMinTimeval; PRUint32 heapCost = aAllocation->mHeapRuntimeCost; PRUint64 weight64 = LL_INIT(0, 0); PRUint64 bytesize64 = LL_INIT(0, 0); PRUint64 timeval64 = LL_INIT(0, 0); PRUint32 cacheval = 0; int displayRes = 0; LL_UI2L(bytesize64, bytesize); LL_UI2L(timeval64, timeval); LL_MUL(weight64, bytesize64, timeval64); PR_fprintf(inRequest->mFD, "

Allocation %u Details:

\n", aAllocation->mRunIndex); PR_fprintf(inRequest->mFD, "
\n"); PR_fprintf(inRequest->mFD, "\n", bytesize); PR_fprintf(inRequest->mFD, "\n", ST_TIMEVAL_PRINTABLE(timeval)); PR_fprintf(inRequest->mFD, "\n", weight64); PR_fprintf(inRequest->mFD, "\n", ST_MICROVAL_PRINTABLE(heapCost)); PR_fprintf(inRequest->mFD, "
Final Size:%u
Lifespan Seconds:" ST_TIMEVAL_FORMAT "
Weight:%llu
Heap Operation Seconds:" ST_MICROVAL_FORMAT "
\n"); /* ** The events. */ { static const char* const headers[] = { "Operation", "Size", "Seconds", "" }; char caption[100]; PR_snprintf(caption, sizeof(caption), "%u Life Event(s)", aAllocation->mEventCount); htmlStartTable(inRequest, NULL, "allocation-details", caption, headers, sizeof(headers) / sizeof(headers[0])); } for (traverse = 0; traverse < aAllocation->mEventCount && traverse < inRequest->mOptions.mListItemMax; traverse++) { PR_fprintf(inRequest->mFD, "\n"); /* ** count. */ PR_fprintf(inRequest->mFD, "%u.\n", traverse + 1); /* ** Operation. */ PR_fprintf(inRequest->mFD, ""); switch (aAllocation->mEvents[traverse].mEventType) { case TM_EVENT_CALLOC: PR_fprintf(inRequest->mFD, "calloc"); break; case TM_EVENT_FREE: PR_fprintf(inRequest->mFD, "free"); break; case TM_EVENT_MALLOC: PR_fprintf(inRequest->mFD, "malloc"); break; case TM_EVENT_REALLOC: PR_fprintf(inRequest->mFD, "realloc"); break; default: retval = __LINE__; REPORT_ERROR(__LINE__, displayAllocationDetails); break; } PR_fprintf(inRequest->mFD, ""); /* ** Size. */ PR_fprintf(inRequest->mFD, "%u\n", aAllocation->mEvents[traverse].mHeapSize); /* ** Timeval. */ cacheval = aAllocation->mEvents[traverse].mTimeval - globals.mMinTimeval; PR_fprintf(inRequest->mFD, "" ST_TIMEVAL_FORMAT "\n", ST_TIMEVAL_PRINTABLE(cacheval)); /* ** Callsite backtrace. ** Only relevant backtrace is for event 0 for now until ** trace-malloc outputs proper callsites for all others. */ PR_fprintf(inRequest->mFD, "\n"); if (0 == traverse) { displayRes = displayCallsites(inRequest, aAllocation->mEvents[traverse].mCallsite, ST_FOLLOW_PARENTS, 0, "event-stack", "", __LINE__); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayCallsite); } } PR_fprintf(inRequest->mFD, "\n"); PR_fprintf(inRequest->mFD, "\n"); } PR_fprintf(inRequest->mFD, "\n"); } else { retval = __LINE__; REPORT_ERROR(__LINE__, displayAllocationDetails); } return retval; } /* ** compareCallsites ** ** qsort callback. ** Compare the callsites as specified by the options. ** There must be NO equal callsites, unless they really are duplicates, ** this is so that a duplicate detector loop can ** simply skip sorted items until the callsite is different. */ int compareCallsites(const void *aSite1, const void *aSite2, void *aContext) { int retval = 0; STRequest *inRequest = (STRequest *) aContext; if (NULL != aSite1 && NULL != aSite2) { tmcallsite *site1 = *((tmcallsite **) aSite1); tmcallsite *site2 = *((tmcallsite **) aSite2); if (NULL != site1 && NULL != site2) { STRun *run1 = CALLSITE_RUN(site1); STRun *run2 = CALLSITE_RUN(site2); if (NULL != run1 && NULL != run2) { STCallsiteStats *stats1 = &(run1->mStats[inRequest->mContext->mIndex]); STCallsiteStats *stats2 = &(run2->mStats[inRequest->mContext->mIndex]); /* ** Logic determined by pref/option. */ switch (inRequest->mOptions.mOrderBy) { case ST_WEIGHT: { PRUint64 weight164 = stats1->mWeight64; PRUint64 weight264 = stats2->mWeight64; if (LL_UCMP(weight164, <, weight264)) { retval = __LINE__; } else if (LL_UCMP(weight164, >, weight264)) { retval = -__LINE__; } } break; case ST_SIZE: { PRUint32 size1 = stats1->mSize; PRUint32 size2 = stats2->mSize; if (size1 < size2) { retval = __LINE__; } else if (size1 > size2) { retval = -__LINE__; } } break; case ST_TIMEVAL: { PRUint64 timeval164 = stats1->mTimeval64; PRUint64 timeval264 = stats2->mTimeval64; if (LL_UCMP(timeval164, <, timeval264)) { retval = __LINE__; } else if (LL_UCMP(timeval164, >, timeval264)) { retval = -__LINE__; } } break; case ST_COUNT: { PRUint32 count1 = stats1->mCompositeCount; PRUint32 count2 = stats2->mCompositeCount; if (count1 < count2) { retval = __LINE__; } else if (count1 > count2) { retval = -__LINE__; } } break; case ST_HEAPCOST: { PRUint32 cost1 = stats1->mHeapRuntimeCost; PRUint32 cost2 = stats2->mHeapRuntimeCost; if (cost1 < cost2) { retval = __LINE__; } else if (cost1 > cost2) { retval = -__LINE__; } } break; default: { REPORT_ERROR(__LINE__, compareAllocations); } break; } /* ** If the return value is still zero, do a pointer compare. ** This makes sure we return zero, only iff the same object. */ if (0 == retval) { if (stats1 < stats2) { retval = __LINE__; } else if (stats1 > stats2) { retval = -__LINE__; } } } } } return retval; } /* ** displayTopCallsites ** ** Given a list of callsites, sort it, and output skipping dups. ** The passed in callsite array is side effected, as in that it will come ** back sorted. This function will not release the array. ** ** Note: If the stamp passed in is non zero, then all callsites must match. ** If the stamp is zero, all callsites must match global sorted run stamp. ** ** Returns !0 on error. */ int displayTopCallsites(STRequest * inRequest, tmcallsite ** aCallsites, PRUint32 aCallsiteCount, PRUint32 aStamp, const char* id, const char* caption, int aRealName) { int retval = 0; if (NULL != aCallsites && 0 < aCallsiteCount) { PRUint32 traverse = 0; STRun *run = NULL; tmcallsite *site = NULL; int headerDisplayed = 0; PRUint32 displayed = 0; /* ** Fixup the stamp. */ if (0 == aStamp && NULL != inRequest->mContext->mSortedRun) { aStamp = inRequest->mContext->mSortedRun->mStats[inRequest->mContext-> mIndex].mStamp; } /* ** Sort the things. */ NS_QuickSort(aCallsites, aCallsiteCount, sizeof(tmcallsite *), compareCallsites, inRequest); /* ** Time for output. */ for (traverse = 0; traverse < aCallsiteCount && inRequest->mOptions.mListItemMax > displayed; traverse++) { site = aCallsites[traverse]; run = CALLSITE_RUN(site); /* ** Only if the same stamp.... */ if (aStamp == run->mStats[inRequest->mContext->mIndex].mStamp) { /* ** We got a header yet? */ if (0 == headerDisplayed) { static const char* const headers[] = { "Rank", "Callsite", "Size", "Seconds", "Weight", "Object Count", "C.H. Operation (sec)" }; headerDisplayed = __LINE__; htmlStartTable(inRequest, NULL, id, caption, headers, sizeof(headers) / sizeof(headers[0])); } displayed++; PR_fprintf(inRequest->mFD, "\n"); /* ** Rank. */ PR_fprintf(inRequest->mFD, "%u\n", displayed); /* ** Method. */ PR_fprintf(inRequest->mFD, ""); htmlCallsiteAnchor(inRequest, site, NULL, aRealName); PR_fprintf(inRequest->mFD, "\n"); /* ** Size. */ PR_fprintf(inRequest->mFD, "%u\n", run->mStats[inRequest->mContext->mIndex].mSize); /* ** Timeval. */ PR_fprintf(inRequest->mFD, "" ST_TIMEVAL_FORMAT "\n", ST_TIMEVAL_PRINTABLE64(run-> mStats[inRequest->mContext-> mIndex].mTimeval64)); /* ** Weight. */ PR_fprintf(inRequest->mFD, "%llu\n", run->mStats[inRequest->mContext->mIndex]. mWeight64); /* ** Allocation object count. */ PR_fprintf(inRequest->mFD, "%u\n", run->mStats[inRequest->mContext->mIndex]. mCompositeCount); /* ** Heap operation seconds. */ PR_fprintf(inRequest->mFD, "" ST_MICROVAL_FORMAT "\n", ST_MICROVAL_PRINTABLE(run-> mStats[inRequest->mContext-> mIndex]. mHeapRuntimeCost)); PR_fprintf(inRequest->mFD, "\n"); if (inRequest->mOptions.mListItemMax > displayed) { /* ** Skip any dups. */ while (((traverse + 1) < aCallsiteCount) && (site == aCallsites[traverse + 1])) { traverse++; } } } } /* ** We need to terminate anything? */ if (0 != headerDisplayed) { PR_fprintf(inRequest->mFD, "\n"); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, displayTopCallsites); } return retval; } /* ** displayCallsiteDetails ** ** The callsite specific report. ** Try to report what we know. ** This one hits a little harder than the rest. ** ** Returns !0 on error. */ int displayCallsiteDetails(STRequest * inRequest, tmcallsite * aCallsite) { int retval = 0; if (NULL != aCallsite && NULL != aCallsite->method) { STRun *sortedRun = NULL; STRun *thisRun = CALLSITE_RUN(aCallsite); const char *sourceFile = NULL; sourceFile = resolveSourceFile(aCallsite->method); PR_fprintf(inRequest->mFD, "
\n"); if (sourceFile) { PR_fprintf(inRequest->mFD, "%s", tmmethodnode_name(aCallsite->method)); PR_fprintf(inRequest->mFD, " [%s:%u]", aCallsite->method->sourcefile, aCallsite->method->linenumber, sourceFile, aCallsite->method->linenumber); } else { PR_fprintf(inRequest->mFD, "

%s+%u(%u) Callsite Details:

\n", tmmethodnode_name(aCallsite->method), aCallsite->offset, (PRUint32) aCallsite->entry.key); } PR_fprintf(inRequest->mFD, "
\n\n"); PR_fprintf(inRequest->mFD, "
\n"); PR_fprintf(inRequest->mFD, "\n", thisRun->mStats[inRequest->mContext->mIndex].mSize); PR_fprintf(inRequest->mFD, "\n", ST_TIMEVAL_PRINTABLE64(thisRun-> mStats[inRequest->mContext->mIndex]. mTimeval64)); PR_fprintf(inRequest->mFD, "\n", thisRun->mStats[inRequest->mContext->mIndex].mWeight64); PR_fprintf(inRequest->mFD, "\n", thisRun->mStats[inRequest->mContext->mIndex]. mCompositeCount); PR_fprintf(inRequest->mFD, "\n", ST_MICROVAL_PRINTABLE(thisRun-> mStats[inRequest->mContext->mIndex]. mHeapRuntimeCost)); PR_fprintf(inRequest->mFD, "
Composite Byte Size:%u
Composite Seconds:" ST_TIMEVAL_FORMAT "
Composite Weight:%llu
Heap Object Count:%u
Heap Operation Seconds:" ST_MICROVAL_FORMAT "
\n\n"); /* ** Kids (callsites we call): */ if (NULL != aCallsite->kids && NULL != aCallsite->kids->method) { int displayRes = 0; PRUint32 siteCount = 0; tmcallsite **sites = NULL; /* ** Collect the kid sibling callsites. ** Doing it this way sorts them for relevance. */ siteCount = callsiteArrayFromCallsite(&sites, 0, aCallsite->kids, ST_FOLLOW_SIBLINGS); if (0 != siteCount && NULL != sites) { /* ** Got something to show. */ displayRes = displayTopCallsites(inRequest, sites, siteCount, 0, "callsites", "Children Callsites", __LINE__); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayTopCallsites); } /* ** Done with array. */ free(sites); sites = NULL; } } /* ** Parents (those who call us): */ if (NULL != aCallsite->parent && NULL != aCallsite->parent->method) { int displayRes = 0; displayRes = displayCallsites(inRequest, aCallsite->parent, ST_FOLLOW_PARENTS, 0, "caller-stack", "Caller stack", __LINE__); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayCallsites); } } /* ** Allocations we did. ** Simply harvest our own run. */ sortedRun = createRun(inRequest->mContext, 0); if (NULL != sortedRun) { int harvestRes = 0; harvestRes = harvestRun(CALLSITE_RUN(aCallsite), sortedRun, &inRequest->mOptions, inRequest->mContext); if (0 == harvestRes) { if (0 != sortedRun->mAllocationCount) { int sortRes = 0; sortRes = sortRun(&inRequest->mOptions, sortedRun); if (0 == sortRes) { int displayRes = 0; displayRes = displayTopAllocations(inRequest, sortedRun, "allocations", "Allocations", 0); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayTopAllocations); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, sortRun); } } } else { retval = __LINE__; REPORT_ERROR(__LINE__, harvestRun); } /* ** Done with the run. */ freeRun(sortedRun); sortedRun = NULL; } else { retval = __LINE__; REPORT_ERROR(__LINE__, createRun); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, displayCallsiteDetails); } return retval; } #if ST_WANT_GRAPHS /* ** graphFootprint ** ** Output a PNG graph of the memory usage of the run. ** ** Draw the graph within these boundaries. ** STGD_MARGIN,STGD_MARGIN,STGD_WIDTH-STGD_MARGIN,STGD_HEIGHT-STGD_MARGIN ** ** Returns !0 on failure. */ int graphFootprint(STRequest * inRequest, STRun * aRun) { int retval = 0; if (NULL != aRun) { PRUint32 *YData = NULL; PRUint32 YDataArray[STGD_SPACE_X]; PRUint32 traverse = 0; PRUint32 timeval = 0; PRUint32 loop = 0; PRBool underLock = PR_FALSE; /* ** Decide if this is custom or we should use the cache. */ if (aRun == inRequest->mContext->mSortedRun) { YData = inRequest->mContext->mFootprintYData; underLock = PR_TRUE; } else { YData = YDataArray; } /* ** Protect the shared data so that only one client has access to it ** at any given time. */ if (PR_FALSE != underLock) { PR_Lock(inRequest->mContext->mImageLock); } /* ** Only do the computations if we aren't cached already. */ if (YData != inRequest->mContext->mFootprintYData || PR_FALSE == inRequest->mContext->mFootprintCached) { memset(YData, 0, sizeof(PRUint32) * STGD_SPACE_X); /* ** Initialize our Y data. ** Pretty brutal loop here.... */ for (traverse = 0; 0 == retval && traverse < STGD_SPACE_X; traverse++) { /* ** Compute what timeval this Y data lands in. */ timeval = ((traverse * (globals.mMaxTimeval - globals.mMinTimeval)) / STGD_SPACE_X) + globals.mMinTimeval; /* ** Loop over the run. ** Should an allocation contain said Timeval, we're good. */ for (loop = 0; loop < aRun->mAllocationCount; loop++) { if (timeval >= aRun->mAllocations[loop]->mMinTimeval && timeval <= aRun->mAllocations[loop]->mMaxTimeval) { YData[traverse] += byteSize(&inRequest->mOptions, aRun->mAllocations[loop]); } } } /* ** Did we cache this? */ if (YData == inRequest->mContext->mFootprintYData) { inRequest->mContext->mFootprintCached = PR_TRUE; } } /* ** Done with the lock. */ if (PR_FALSE != underLock) { PR_Unlock(inRequest->mContext->mImageLock); } if (0 == retval) { PRUint32 minMemory = (PRUint32) - 1; PRUint32 maxMemory = 0; int transparent = 0; gdImagePtr graph = NULL; /* ** Go through and find the minimum and maximum sizes. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { if (YData[traverse] < minMemory) { minMemory = YData[traverse]; } if (YData[traverse] > maxMemory) { maxMemory = YData[traverse]; } } /* ** We can now draw the graph. */ graph = createGraph(&transparent); if (NULL != graph) { gdSink theSink; int red = 0; int x1 = 0; int y1 = 0; int x2 = 0; int y2 = 0; PRUint32 percents[11] = { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; char *timevals[11]; char *bytes[11]; char timevalSpace[11][32]; char byteSpace[11][32]; int legendColors[1]; const char *legends[1] = { "Memory in Use" }; PRUint32 cached = 0; /* ** Figure out what the labels will say. */ for (traverse = 0; traverse < 11; traverse++) { timevals[traverse] = timevalSpace[traverse]; bytes[traverse] = byteSpace[traverse]; cached = ((globals.mMaxTimeval - globals.mMinTimeval) * percents[traverse]) / 100; PR_snprintf(timevals[traverse], 32, ST_TIMEVAL_FORMAT, ST_TIMEVAL_PRINTABLE(cached)); PR_snprintf(bytes[traverse], 32, "%u", ((maxMemory - minMemory) * percents[traverse]) / 100); } red = gdImageColorAllocate(graph, 255, 0, 0); legendColors[0] = red; drawGraph(graph, -1, "Memory Footprint Over Time", "Seconds", "Bytes", 11, percents, (const char **) timevals, 11, percents, (const char **) bytes, 1, legendColors, legends); if (maxMemory != minMemory) { PRInt64 in64 = LL_INIT(0, 0); PRInt64 ydata64 = LL_INIT(0, 0); PRInt64 spacey64 = LL_INIT(0, 0); PRInt64 mem64 = LL_INIT(0, 0); PRInt32 in32 = 0; /* ** Go through our Y data and mark it up. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { x1 = traverse + STGD_MARGIN; y1 = STGD_HEIGHT - STGD_MARGIN; /* ** Need to do this math in 64 bits. */ LL_I2L(ydata64, YData[traverse]); LL_I2L(spacey64, STGD_SPACE_Y); LL_I2L(mem64, (maxMemory - minMemory)); LL_MUL(in64, ydata64, spacey64); LL_DIV(in64, in64, mem64); LL_L2I(in32, in64); x2 = x1; y2 = y1 - in32; gdImageLine(graph, x1, y1, x2, y2, red); } } theSink.context = inRequest->mFD; theSink.sink = pngSink; gdImagePngToSink(graph, &theSink); gdImageDestroy(graph); } else { retval = __LINE__; REPORT_ERROR(__LINE__, createGraph); } } } else { retval = __LINE__; REPORT_ERROR(__LINE__, graphFootprint); } return retval; } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS /* ** graphTimeval ** ** Output a PNG graph of when the memory is allocated. ** ** Draw the graph within these boundaries. ** STGD_MARGIN,STGD_MARGIN,STGD_WIDTH-STGD_MARGIN,STGD_HEIGHT-STGD_MARGIN ** ** Returns !0 on failure. */ int graphTimeval(STRequest * inRequest, STRun * aRun) { int retval = 0; if (NULL != aRun) { PRUint32 *YData = NULL; PRUint32 YDataArray[STGD_SPACE_X]; PRUint32 traverse = 0; PRUint32 timeval = globals.mMinTimeval; PRUint32 loop = 0; PRBool underLock = PR_FALSE; /* ** Decide if this is custom or we should use the global cache. */ if (aRun == inRequest->mContext->mSortedRun) { YData = inRequest->mContext->mTimevalYData; underLock = PR_TRUE; } else { YData = YDataArray; } /* ** Protect the shared data so that only one client has access to it ** at any given time. */ if (PR_FALSE != underLock) { PR_Lock(inRequest->mContext->mImageLock); } /* ** Only do the computations if we aren't cached already. */ if (YData != inRequest->mContext->mTimevalYData || PR_FALSE == inRequest->mContext->mTimevalCached) { PRUint32 prevTimeval = 0; memset(YData, 0, sizeof(PRUint32) * STGD_SPACE_X); /* ** Initialize our Y data. ** Pretty brutal loop here.... */ for (traverse = 0; 0 == retval && traverse < STGD_SPACE_X; traverse++) { /* ** Compute what timeval this Y data lands in. */ prevTimeval = timeval; timeval = ((traverse * (globals.mMaxTimeval - globals.mMinTimeval)) / STGD_SPACE_X) + globals.mMinTimeval; /* ** Loop over the run. ** Should an allocation have been allocated between ** prevTimeval and timeval.... */ for (loop = 0; loop < aRun->mAllocationCount; loop++) { if (prevTimeval < aRun->mAllocations[loop]->mMinTimeval && timeval >= aRun->mAllocations[loop]->mMinTimeval) { YData[traverse] += byteSize(&inRequest->mOptions, aRun->mAllocations[loop]); } } } /* ** Did we cache this? */ if (YData == inRequest->mContext->mTimevalYData) { inRequest->mContext->mTimevalCached = PR_TRUE; } } /* ** Done with the lock. */ if (PR_FALSE != underLock) { PR_Unlock(inRequest->mContext->mImageLock); } if (0 == retval) { PRUint32 minMemory = (PRUint32) - 1; PRUint32 maxMemory = 0; int transparent = 0; gdImagePtr graph = NULL; /* ** Go through and find the minimum and maximum sizes. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { if (YData[traverse] < minMemory) { minMemory = YData[traverse]; } if (YData[traverse] > maxMemory) { maxMemory = YData[traverse]; } } /* ** We can now draw the graph. */ graph = createGraph(&transparent); if (NULL != graph) { gdSink theSink; int red = 0; int x1 = 0; int y1 = 0; int x2 = 0; int y2 = 0; PRUint32 percents[11] = { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; char *timevals[11]; char *bytes[11]; char timevalSpace[11][32]; char byteSpace[11][32]; int legendColors[1]; const char *legends[1] = { "Memory Allocated" }; PRUint32 cached = 0; /* ** Figure out what the labels will say. */ for (traverse = 0; traverse < 11; traverse++) { timevals[traverse] = timevalSpace[traverse]; bytes[traverse] = byteSpace[traverse]; cached = ((globals.mMaxTimeval - globals.mMinTimeval) * percents[traverse]) / 100; PR_snprintf(timevals[traverse], 32, ST_TIMEVAL_FORMAT, ST_TIMEVAL_PRINTABLE(cached)); PR_snprintf(bytes[traverse], 32, "%u", ((maxMemory - minMemory) * percents[traverse]) / 100); } red = gdImageColorAllocate(graph, 255, 0, 0); legendColors[0] = red; drawGraph(graph, -1, "Allocation Times", "Seconds", "Bytes", 11, percents, (const char **) timevals, 11, percents, (const char **) bytes, 1, legendColors, legends); if (maxMemory != minMemory) { PRInt64 in64 = LL_INIT(0, 0); PRInt64 ydata64 = LL_INIT(0, 0); PRInt64 spacey64 = LL_INIT(0, 0); PRInt64 mem64 = LL_INIT(0, 0); PRInt32 in32 = 0; /* ** Go through our Y data and mark it up. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { x1 = traverse + STGD_MARGIN; y1 = STGD_HEIGHT - STGD_MARGIN; /* ** Need to do this math in 64 bits. */ LL_I2L(ydata64, YData[traverse]); LL_I2L(spacey64, STGD_SPACE_Y); LL_I2L(mem64, (maxMemory - minMemory)); LL_MUL(in64, ydata64, spacey64); LL_DIV(in64, in64, mem64); LL_L2I(in32, in64); x2 = x1; y2 = y1 - in32; gdImageLine(graph, x1, y1, x2, y2, red); } } theSink.context = inRequest->mFD; theSink.sink = pngSink; gdImagePngToSink(graph, &theSink); gdImageDestroy(graph); } else { retval = __LINE__; REPORT_ERROR(__LINE__, createGraph); } } } else { retval = __LINE__; REPORT_ERROR(__LINE__, graphTimeval); } return retval; } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS /* ** graphLifespan ** ** Output a PNG graph of how long memory lived. ** ** Draw the graph within these boundaries. ** STGD_MARGIN,STGD_MARGIN,STGD_WIDTH-STGD_MARGIN,STGD_HEIGHT-STGD_MARGIN ** ** Returns !0 on failure. */ int graphLifespan(STRequest * inRequest, STRun * aRun) { int retval = 0; if (NULL != aRun) { PRUint32 *YData = NULL; PRUint32 YDataArray[STGD_SPACE_X]; PRUint32 traverse = 0; PRUint32 timeval = 0; PRUint32 loop = 0; PRBool underLock = PR_FALSE; /* ** Decide if this is custom or we should use the global cache. */ if (aRun == inRequest->mContext->mSortedRun) { YData = inRequest->mContext->mLifespanYData; underLock = PR_TRUE; } else { YData = YDataArray; } /* ** Protect the shared data so that only one client has access to it ** at any given time. */ if (PR_FALSE != underLock) { PR_Lock(inRequest->mContext->mImageLock); } /* ** Only do the computations if we aren't cached already. */ if (YData != inRequest->mContext->mLifespanYData || PR_FALSE == inRequest->mContext->mLifespanCached) { PRUint32 prevTimeval = 0; PRUint32 lifespan = 0; memset(YData, 0, sizeof(PRUint32) * STGD_SPACE_X); /* ** Initialize our Y data. ** Pretty brutal loop here.... */ for (traverse = 0; 0 == retval && traverse < STGD_SPACE_X; traverse++) { /* ** Compute what timeval this Y data lands in. */ prevTimeval = timeval; timeval = (traverse * (globals.mMaxTimeval - globals.mMinTimeval)) / STGD_SPACE_X; /* ** Loop over the run. ** Should an allocation have lived between ** prevTimeval and timeval.... */ for (loop = 0; loop < aRun->mAllocationCount; loop++) { lifespan = aRun->mAllocations[loop]->mMaxTimeval - aRun->mAllocations[loop]->mMinTimeval; if (prevTimeval < lifespan && timeval >= lifespan) { YData[traverse] += byteSize(&inRequest->mOptions, aRun->mAllocations[loop]); } } } /* ** Did we cache this? */ if (YData == inRequest->mContext->mLifespanYData) { inRequest->mContext->mLifespanCached = PR_TRUE; } } /* ** Done with the lock. */ if (PR_FALSE != underLock) { PR_Unlock(inRequest->mContext->mImageLock); } if (0 == retval) { PRUint32 minMemory = (PRUint32) - 1; PRUint32 maxMemory = 0; int transparent = 0; gdImagePtr graph = NULL; /* ** Go through and find the minimum and maximum sizes. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { if (YData[traverse] < minMemory) { minMemory = YData[traverse]; } if (YData[traverse] > maxMemory) { maxMemory = YData[traverse]; } } /* ** We can now draw the graph. */ graph = createGraph(&transparent); if (NULL != graph) { gdSink theSink; int red = 0; int x1 = 0; int y1 = 0; int x2 = 0; int y2 = 0; PRUint32 percents[11] = { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; char *timevals[11]; char *bytes[11]; char timevalSpace[11][32]; char byteSpace[11][32]; int legendColors[1]; const char *legends[1] = { "Live Memory" }; PRUint32 cached = 0; /* ** Figure out what the labels will say. */ for (traverse = 0; traverse < 11; traverse++) { timevals[traverse] = timevalSpace[traverse]; bytes[traverse] = byteSpace[traverse]; cached = ((globals.mMaxTimeval - globals.mMinTimeval) * percents[traverse]) / 100; PR_snprintf(timevals[traverse], 32, ST_TIMEVAL_FORMAT, ST_TIMEVAL_PRINTABLE(cached)); PR_snprintf(bytes[traverse], 32, "%u", ((maxMemory - minMemory) * percents[traverse]) / 100); } red = gdImageColorAllocate(graph, 255, 0, 0); legendColors[0] = red; drawGraph(graph, -1, "Allocation Lifespans", "Lifespan", "Bytes", 11, percents, (const char **) timevals, 11, percents, (const char **) bytes, 1, legendColors, legends); if (maxMemory != minMemory) { PRInt64 in64 = LL_INIT(0, 0); PRInt64 ydata64 = LL_INIT(0, 0); PRInt64 spacey64 = LL_INIT(0, 0); PRInt64 mem64 = LL_INIT(0, 0); PRInt32 in32 = 0; /* ** Go through our Y data and mark it up. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { x1 = traverse + STGD_MARGIN; y1 = STGD_HEIGHT - STGD_MARGIN; /* ** Need to do this math in 64 bits. */ LL_I2L(ydata64, YData[traverse]); LL_I2L(spacey64, STGD_SPACE_Y); LL_I2L(mem64, (maxMemory - minMemory)); LL_MUL(in64, ydata64, spacey64); LL_DIV(in64, in64, mem64); LL_L2I(in32, in64); x2 = x1; y2 = y1 - in32; gdImageLine(graph, x1, y1, x2, y2, red); } } theSink.context = inRequest->mFD; theSink.sink = pngSink; gdImagePngToSink(graph, &theSink); gdImageDestroy(graph); } else { retval = __LINE__; REPORT_ERROR(__LINE__, createGraph); } } } else { retval = __LINE__; REPORT_ERROR(__LINE__, graphLifespan); } return retval; } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS /* ** graphWeight ** ** Output a PNG graph of Allocations by Weight ** ** Draw the graph within these boundaries. ** STGD_MARGIN,STGD_MARGIN,STGD_WIDTH-STGD_MARGIN,STGD_HEIGHT-STGD_MARGIN ** ** Returns !0 on failure. */ int graphWeight(STRequest * inRequest, STRun * aRun) { int retval = 0; if (NULL != aRun) { PRUint64 *YData64 = NULL; PRUint64 YDataArray64[STGD_SPACE_X]; PRUint32 traverse = 0; PRUint32 timeval = globals.mMinTimeval; PRUint32 loop = 0; PRBool underLock = PR_FALSE; /* ** Decide if this is custom or we should use the global cache. */ if (aRun == inRequest->mContext->mSortedRun) { YData64 = inRequest->mContext->mWeightYData64; underLock = PR_TRUE; } else { YData64 = YDataArray64; } /* ** Protect the shared data so that only one client has access to it ** at any given time. */ if (PR_FALSE != underLock) { PR_Lock(inRequest->mContext->mImageLock); } /* ** Only do the computations if we aren't cached already. */ if (YData64 != inRequest->mContext->mWeightYData64 || PR_FALSE == inRequest->mContext->mWeightCached) { PRUint32 prevTimeval = 0; memset(YData64, 0, sizeof(PRUint64) * STGD_SPACE_X); /* ** Initialize our Y data. ** Pretty brutal loop here.... */ for (traverse = 0; 0 == retval && traverse < STGD_SPACE_X; traverse++) { /* ** Compute what timeval this Y data lands in. */ prevTimeval = timeval; timeval = ((traverse * (globals.mMaxTimeval - globals.mMinTimeval)) / STGD_SPACE_X) + globals.mMinTimeval; /* ** Loop over the run. ** Should an allocation have been allocated between ** prevTimeval and timeval.... */ for (loop = 0; loop < aRun->mAllocationCount; loop++) { if (prevTimeval < aRun->mAllocations[loop]->mMinTimeval && timeval >= aRun->mAllocations[loop]->mMinTimeval) { PRUint64 size64 = LL_INIT(0, 0); PRUint64 lifespan64 = LL_INIT(0, 0); PRUint64 weight64 = LL_INIT(0, 0); LL_UI2L(size64, byteSize(&inRequest->mOptions, aRun->mAllocations[loop])); LL_UI2L(lifespan64, (aRun->mAllocations[loop]->mMaxTimeval - aRun->mAllocations[loop]->mMinTimeval)); LL_MUL(weight64, size64, lifespan64); LL_ADD(YData64[traverse], YData64[traverse], weight64); } } } /* ** Did we cache this? */ if (YData64 == inRequest->mContext->mWeightYData64) { inRequest->mContext->mWeightCached = PR_TRUE; } } /* ** Done with the lock. */ if (PR_FALSE != underLock) { PR_Unlock(inRequest->mContext->mImageLock); } if (0 == retval) { PRUint64 minWeight64 = LL_INIT(0xFFFFFFFF, 0xFFFFFFFF); PRUint64 maxWeight64 = LL_INIT(0, 0); int transparent = 0; gdImagePtr graph = NULL; /* ** Go through and find the minimum and maximum weights. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { if (LL_UCMP(YData64[traverse], <, minWeight64)) { minWeight64 = YData64[traverse]; } if (LL_UCMP(YData64[traverse], >, maxWeight64)) { maxWeight64 = YData64[traverse]; } } /* ** We can now draw the graph. */ graph = createGraph(&transparent); if (NULL != graph) { gdSink theSink; int red = 0; int x1 = 0; int y1 = 0; int x2 = 0; int y2 = 0; PRUint32 percents[11] = { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; char *timevals[11]; char *bytes[11]; char timevalSpace[11][32]; char byteSpace[11][32]; int legendColors[1]; const char *legends[1] = { "Memory Weight" }; PRUint64 percent64 = LL_INIT(0, 0); PRUint64 result64 = LL_INIT(0, 0); PRUint64 hundred64 = LL_INIT(0, 0); PRUint32 cached = 0; LL_UI2L(hundred64, 100); /* ** Figure out what the labels will say. */ for (traverse = 0; traverse < 11; traverse++) { timevals[traverse] = timevalSpace[traverse]; bytes[traverse] = byteSpace[traverse]; cached = ((globals.mMaxTimeval - globals.mMinTimeval) * percents[traverse]) / 100; PR_snprintf(timevals[traverse], 32, ST_TIMEVAL_FORMAT, ST_TIMEVAL_PRINTABLE(cached)); LL_UI2L(percent64, percents[traverse]); LL_SUB(result64, maxWeight64, minWeight64); LL_MUL(result64, result64, percent64); LL_DIV(result64, result64, hundred64); PR_snprintf(bytes[traverse], 32, "%llu", result64); } red = gdImageColorAllocate(graph, 255, 0, 0); legendColors[0] = red; drawGraph(graph, -1, "Allocation Weights", "Seconds", "Weight", 11, percents, (const char **) timevals, 11, percents, (const char **) bytes, 1, legendColors, legends); if (LL_NE(maxWeight64, minWeight64)) { PRInt64 in64 = LL_INIT(0, 0); PRInt64 spacey64 = LL_INIT(0, 0); PRInt64 weight64 = LL_INIT(0, 0); PRInt32 in32 = 0; /* ** Go through our Y data and mark it up. */ for (traverse = 0; traverse < STGD_SPACE_X; traverse++) { x1 = traverse + STGD_MARGIN; y1 = STGD_HEIGHT - STGD_MARGIN; /* ** Need to do this math in 64 bits. */ LL_I2L(spacey64, STGD_SPACE_Y); LL_SUB(weight64, maxWeight64, minWeight64); LL_MUL(in64, YData64[traverse], spacey64); LL_DIV(in64, in64, weight64); LL_L2I(in32, in64); x2 = x1; y2 = y1 - in32; gdImageLine(graph, x1, y1, x2, y2, red); } } theSink.context = inRequest->mFD; theSink.sink = pngSink; gdImagePngToSink(graph, &theSink); gdImageDestroy(graph); } else { retval = __LINE__; REPORT_ERROR(__LINE__, createGraph); } } } else { retval = __LINE__; REPORT_ERROR(__LINE__, graphWeight); } return retval; } #endif /* ST_WANT_GRAPHS */ #define ST_WEB_OPTION_BOOL(option_name, option_genre, option_help) \ { \ PRUint32 convert = (PRUint32)outOptions->m##option_name; \ \ getDataPRUint32(inFormData, #option_name, 1, &convert, 1); \ outOptions->m##option_name = (PRBool)convert; \ } #define ST_WEB_OPTION_STRING(option_name, option_genre, default_value, option_help) \ getDataString(inFormData, #option_name, 1, outOptions->m##option_name, sizeof(outOptions->m##option_name)); #define ST_WEB_OPTION_STRING_ARRAY(option_name, option_genre, array_size, option_help) \ { \ PRUint32 loop = 0; \ PRUint32 found = 0; \ char buffer[ST_OPTION_STRING_MAX]; \ \ for(loop = 0; loop < array_size; loop++) \ { \ buffer[0] = '\0'; \ getDataString(inFormData, #option_name, (loop + 1), buffer, sizeof(buffer)); \ \ if('\0' != buffer[0]) \ { \ PR_snprintf(outOptions->m##option_name[found], sizeof(outOptions->m##option_name[found]), "%s", buffer); \ found++; \ } \ } \ \ for(; found < array_size; found++) \ { \ outOptions->m##option_name[found][0] = '\0'; \ } \ } #define ST_WEB_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help) /* no implementation */ #define ST_WEB_OPTION_UINT32(option_name, option_genre, default_value, multiplier, option_help) \ getDataPRUint32(inFormData, #option_name, 1, &outOptions->m##option_name, multiplier); #define ST_WEB_OPTION_UINT64(option_name, option_genre, default_value, multiplier, option_help) \ { \ PRUint64 mul64 = multiplier; \ \ getDataPRUint64(inFormData, #option_name, 1, &outOptions->m##option_name##64, mul64); \ } /* ** fillOptions ** ** Given an appropriate hexcaped string, distill the option values ** and fill the given STOption struct. ** ** Note that the options passed in are not touched UNLESS there is ** a replacement found in the form data. */ void fillOptions(STOptions * outOptions, const FormData * inFormData) { if (NULL != outOptions && NULL != inFormData) { #include "stoptions.h" /* ** Special sanity check here for some options that need data validation. */ if (!outOptions->mCategoryName[0] || !findCategoryNode(outOptions->mCategoryName, &globals)) { PR_snprintf(outOptions->mCategoryName, sizeof(outOptions->mCategoryName), "%s", ST_ROOT_CATEGORY_NAME); } } } void displayOptionString(STRequest * inRequest, const char *option_name, const char *option_genre, const char *default_value, const char *option_help, const char *value) { #if 0 PR_fprintf(inRequest->mFD, "\n", option_name); #endif PR_fprintf(inRequest->mFD, "
\n"); PR_fprintf(inRequest->mFD, "

%s

\n", option_name); PR_fprintf(inRequest->mFD, "\n", option_name, value); PR_fprintf(inRequest->mFD, "

Default value is \"%s\".

\n

%s

\n", default_value, option_help); PR_fprintf(inRequest->mFD, "
\n"); } static void displayOptionStringArray(STRequest * inRequest, const char *option_name, const char *option_genre, PRUint32 array_size, const char *option_help, const char values[5] [ST_OPTION_STRING_MAX]) { /* values should not be a fixed length! */ PR_ASSERT(array_size == 5); #if 0 PR_fprintf(inRequest->mFD, "\n", option_name); #endif PR_fprintf(inRequest->mFD, "
\n"); PR_fprintf(inRequest->mFD, "

%s

\n", option_name); { PRUint32 loop = 0; for (loop = 0; loop < array_size; loop++) { PR_fprintf(inRequest->mFD, "
\n", option_name, values[loop]); } } PR_fprintf(inRequest->mFD, "

Up to %u occurrences allowed.

\n

%s

\n", array_size, option_help); PR_fprintf(inRequest->mFD, "
\n"); } static void displayOptionInt(STRequest * inRequest, const char *option_name, const char *option_genre, PRUint32 default_value, PRUint32 multiplier, const char *option_help, PRUint32 value) { #if 0 PR_fprintf(inRequest->mFD, "\n", option_name); #endif PR_fprintf(inRequest->mFD, "
\n"); PR_fprintf(inRequest->mFD, "

%s

\n", option_name); PR_fprintf(inRequest->mFD, "\n", option_name, value / multiplier); PR_fprintf(inRequest->mFD, "

Default value is %u.

\n

%s

\n", default_value, option_help); PR_fprintf(inRequest->mFD, "
\n"); } static void displayOptionInt64(STRequest * inRequest, const char *option_name, const char *option_genre, PRUint64 default_value, PRUint64 multiplier, const char *option_help, PRUint64 value) { #if 0 PR_fprintf(inRequest->mFD, "\n", option_name); #endif PR_fprintf(inRequest->mFD, "
\n"); PR_fprintf(inRequest->mFD, "

%s

\n", option_name); { PRUint64 def64 = default_value; PRUint64 mul64 = multiplier; PRUint64 div64; LL_DIV(div64, value, mul64); PR_fprintf(inRequest->mFD, "\n", option_name, div64); PR_fprintf(inRequest->mFD, "

Default value is %llu.

\n

%s

\n", def64, option_help); } PR_fprintf(inRequest->mFD, "
\n"); } /* ** displaySettings ** ** Present the settings for change during execution. */ void displaySettings(STRequest * inRequest) { int applyRes = 0; /* ** We've got a form to create. */ PR_fprintf(inRequest->mFD, "
\n"); /* ** Respect newlines in help text. */ #if 0 PR_fprintf(inRequest->mFD, "
\n");
#endif
#define ST_WEB_OPTION_BOOL(option_name, option_genre, option_help) \
    displayOptionBool(option_name, option_genre, option_help)
#define ST_WEB_OPTION_STRING(option_name, option_genre, default_value, option_help) \
    displayOptionString(inRequest, #option_name, #option_genre, default_value, option_help, inRequest->mOptions.m##option_name);
#define ST_WEB_OPTION_STRING_ARRAY(option_name, option_genre, array_size, option_help) \
    displayOptionStringArray(inRequest, #option_name, #option_genre, array_size, option_help, inRequest->mOptions.m##option_name);
#define ST_WEB_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help)  /* no implementation */
#define ST_WEB_OPTION_UINT32(option_name, option_genre, default_value, multiplier, option_help) \
    displayOptionInt(inRequest, #option_name, #option_genre, default_value, multiplier, option_help, inRequest->mOptions.m##option_name);
#define ST_WEB_OPTION_UINT64(option_name, option_genre, default_value, multiplier, option_help) \
    displayOptionInt64(inRequest, #option_name, #option_genre, default_value, multiplier, option_help, inRequest->mOptions.m##option_name##64);
#include "stoptions.h"
    /*
     **  Give a submit/reset button, obligatory.
     **  Done respecting newlines in help text.
     */
    PR_fprintf(inRequest->mFD,
               " \n");
#if 0
    PR_fprintf(inRequest->mFD, "
\n"); #endif /* ** Done with form. */ PR_fprintf(inRequest->mFD, "
\n"); } int handleLocalFile(STRequest * inRequest, const char *aFilename) { static const char *const local_files[] = { "spacetrace.css", }; static const size_t local_file_count = sizeof(local_files) / sizeof(local_files[0]); size_t i; for (i = 0; i < local_file_count; i++) { if (0 == strcmp(local_files[i], aFilename)) return 1; } return 0; } /* ** displayFile ** ** reads a file from disk, and streams it to the request */ int displayFile(STRequest * inRequest, const char *aFilename) { PRFileDesc *inFd; const char *filepath = PR_smprintf("res%c%s", PR_GetDirectorySeparator(), aFilename); char buffer[2048]; PRInt32 readRes; inFd = PR_Open(filepath, PR_RDONLY, PR_IRUSR); if (!inFd) return -1; while ((readRes = PR_Read(inFd, buffer, sizeof(buffer))) > 0) { PR_Write(inRequest->mFD, buffer, readRes); } if (readRes != 0) return -1; PR_Close(inFd); return 0; } /* ** displayIndex ** ** Present a list of the reports you can drill down into. ** Returns !0 on failure. */ int displayIndex(STRequest * inRequest) { int retval = 0; STOptions *options = &inRequest->mOptions; /* ** Present reports in a list format. */ PR_fprintf(inRequest->mFD, "
    "); PR_fprintf(inRequest->mFD, "\n
  • "); htmlAnchor(inRequest, "root_callsites.html", "Root Callsites", NULL, "mainmenu", options); PR_fprintf(inRequest->mFD, "\n
  • "); htmlAnchor(inRequest, "categories_summary.html", "Categories Report", NULL, "mainmenu", options); PR_fprintf(inRequest->mFD, "\n
  • "); htmlAnchor(inRequest, "top_callsites.html", "Top Callsites Report", NULL, "mainmenu", options); PR_fprintf(inRequest->mFD, "\n
  • "); htmlAnchor(inRequest, "top_allocations.html", "Top Allocations Report", NULL, "mainmenu", options); PR_fprintf(inRequest->mFD, "\n
  • "); htmlAnchor(inRequest, "memory_leaks.html", "Memory Leak Report", NULL, "mainmenu", options); #if ST_WANT_GRAPHS PR_fprintf(inRequest->mFD, "\n
  • Graphs"); PR_fprintf(inRequest->mFD, "
      "); PR_fprintf(inRequest->mFD, "\n
    • "); htmlAnchor(inRequest, "footprint_graph.html", "Footprint", NULL, "mainmenu graph", options); PR_fprintf(inRequest->mFD, "\n
    • "); htmlAnchor(inRequest, "lifespan_graph.html", "Allocation Lifespans", NULL, "mainmenu graph", options); PR_fprintf(inRequest->mFD, "\n
    • "); htmlAnchor(inRequest, "times_graph.html", "Allocation Times", NULL, "mainmenu graph", options); PR_fprintf(inRequest->mFD, "\n
    • "); htmlAnchor(inRequest, "weight_graph.html", "Allocation Weights", NULL, "mainmenu graph", options); PR_fprintf(inRequest->mFD, "\n
    \n"); #endif /* ST_WANT_GRAPHS */ PR_fprintf(inRequest->mFD, "\n
\n"); return retval; } /* ** initRequestOptions ** ** Given the request, set the options that are specific to the request. ** These can generally be determined in the following manner: ** Copy over global options. ** If getData present, attempt to use options therein. */ void initRequestOptions(STRequest * inRequest) { if (NULL != inRequest) { /* ** Copy of global options. */ memcpy(&inRequest->mOptions, &globals.mCommandLineOptions, sizeof(globals.mCommandLineOptions)); /* ** Decide what will override global options if anything. */ if (NULL != inRequest->mGetData) { fillOptions(&inRequest->mOptions, inRequest->mGetData); } } } STContext * contextLookup(STOptions * inOptions) /* ** Lookup a context that matches the options. ** The lookup may block, especially if the context needs to be created. ** Callers of this API must eventually call contextRelease with the ** return value; failure to do so will cause this applications ** to eventually not work as advertised. ** ** inOptions The options determine which context is relevant. ** returns The fully completed context on success. ** The context is read only in practice, so please do not ** write to it or anything it points to. ** NULL on failure. */ { STContext *retval = NULL; STContextCache *inCache = &globals.mContextCache; if (NULL != inOptions && NULL != inCache) { PRUint32 loop = 0; STContext *categoryException = NULL; PRBool newContext = PR_FALSE; PRBool evictContext = PR_FALSE; PRBool changeCategoryContext = PR_FALSE; /* ** Own the context cache while we are in here. */ PR_Lock(inCache->mLock); /* ** Loop until successful. ** Waiting on the condition variable makes sure we don't hog the ** lock below. */ while (1) { /* ** Go over the cache items. ** At this point we are looking for a cache hit, with multiple ** readers. */ for (loop = 0; loop < inCache->mItemCount; loop++) { /* ** Must be in use. */ if (PR_FALSE != inCache->mItems[loop].mInUse) { int delta[(STOptionGenre) MaxGenres]; /* ** Compare the relevant options, figure out if different ** in any genre that we care about. */ memset(&delta, 0, sizeof(delta)); #define ST_WEB_OPTION_BOOL(option_name, option_genre, option_help) \ if(inOptions->m##option_name != inCache->mItems[loop].mOptions.m##option_name) \ { \ delta[(STOptionGenre)option_genre]++; \ } #define ST_WEB_OPTION_STRING(option_name, option_genre, default_value, option_help) \ if(0 != strcmp(inOptions->m##option_name, inCache->mItems[loop].mOptions.m##option_name)) \ { \ delta[(STOptionGenre)option_genre]++; \ } #define ST_WEB_OPTION_STRING_ARRAY(option_name, option_genre, array_size, option_help) \ { \ PRUint32 macro_loop = 0; \ \ for(macro_loop = 0; macro_loop < array_size; macro_loop++) \ { \ if(0 != strcmp(inOptions->m##option_name[macro_loop], inCache->mItems[loop].mOptions.m##option_name[macro_loop])) \ { \ break; \ } \ } \ \ if(macro_loop != array_size) \ { \ delta[(STOptionGenre)option_genre]++; \ } \ } #define ST_WEB_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help) /* no implementation */ #define ST_WEB_OPTION_UINT32(option_name, option_genre, default_value, multiplier, option_help) \ if(inOptions->m##option_name != inCache->mItems[loop].mOptions.m##option_name) \ { \ delta[(STOptionGenre)option_genre]++; \ } #define ST_WEB_OPTION_UINT64(option_name, option_genre, default_value, multiplier, option_help) \ if(LL_NE(inOptions->m##option_name##64, inCache->mItems[loop].mOptions.m##option_name##64)) \ { \ delta[(STOptionGenre)option_genre]++; \ } #include "stoptions.h" /* ** If there is no genre out of alignment, we accept this as the context. */ if (0 == delta[CategoryGenre] && 0 == delta[DataSortGenre] && 0 == delta[DataSetGenre] && 0 == delta[DataSizeGenre] ) { retval = &inCache->mItems[loop].mContext; break; } /* ** A special exception to the rule here. ** If all that is different is the category genre, and there ** is no one looking at the context (zero ref count), ** then there is some magic we can perform. */ if (NULL == retval && 0 == inCache->mItems[loop].mReferenceCount && 0 != delta[CategoryGenre] && 0 == delta[DataSortGenre] && 0 == delta[DataSetGenre] && 0 == delta[DataSizeGenre] ) { categoryException = &inCache->mItems[loop].mContext; } } } /* ** Pick up our category exception if relevant. */ if (NULL == retval && NULL != categoryException) { retval = categoryException; categoryException = NULL; changeCategoryContext = PR_TRUE; } /* ** If we don't have a cache hit, then we need to check for an empty ** spot to take over. */ if (NULL == retval) { for (loop = 0; loop < inCache->mItemCount; loop++) { /* ** Must NOT be in use, then it will be the context. */ if (PR_FALSE == inCache->mItems[loop].mInUse) { retval = &inCache->mItems[loop].mContext; newContext = PR_TRUE; break; } } } /* ** If we still don't have a return value, then we need to see if ** there are any old items with zero ref counts that we ** can take over. */ if (NULL == retval) { for (loop = 0; loop < inCache->mItemCount; loop++) { /* ** Must be in use. */ if (PR_FALSE != inCache->mItems[loop].mInUse) { /* ** Must have a ref count of zero. */ if (0 == inCache->mItems[loop].mReferenceCount) { /* ** Must be older than any other we know of. */ if (NULL != retval) { if (inCache->mItems[loop].mLastAccessed < inCache->mItems[retval->mIndex]. mLastAccessed) { retval = &inCache->mItems[loop].mContext; } } else { retval = &inCache->mItems[loop].mContext; } } } } if (NULL != retval) { evictContext = PR_TRUE; } } /* ** If we still don't have a return value, then we can not avoid ** waiting around until someone gives us the chance. ** The chance, in specific, comes when a cache item reference ** count returns to zero, upon which we can try to take ** it over again. */ if (NULL == retval) { /* ** This has the side effect of release the context lock. ** This is a good thing so that other clients can continue ** to connect and hopefully have cache hits. ** If they do not have cache hits, then we will end up ** with a bunch of waiters here.... */ PR_WaitCondVar(inCache->mCacheMiss, PR_INTERVAL_NO_TIMEOUT); } /* ** If we have a return value, improve the reference count here. */ if (NULL != retval) { /* ** Decide if there are any changes to be made. ** Do as little as possible, then fall through the context ** cache lock to finish up. ** This way, lengthy init operations will not block ** other clients, only matches to this context. */ if (PR_FALSE != newContext || PR_FALSE != evictContext || PR_FALSE != changeCategoryContext) { /* ** Overwrite the prefs for this context. ** They are changing. */ memcpy(&inCache->mItems[retval->mIndex].mOptions, inOptions, sizeof(inCache->mItems[retval->mIndex].mOptions)); /* ** As we are going to be changing the context, we need to write lock it. ** This makes sure no readers are allowed while we are making our changes. */ PR_RWLock_Wlock(retval->mRWLock); } /* ** NOTE, ref count gets incremented here, inside content ** cache lock so it can not be flushed once lock ** released. */ inCache->mItems[retval->mIndex].mInUse = PR_TRUE; inCache->mItems[retval->mIndex].mReferenceCount++; /* ** That's all folks. */ break; } } /* while(1), try again */ /* ** Done with context cache. */ PR_Unlock(inCache->mLock); /* ** Now that the context cached is free to continue accepting other ** requests, we have a little more work to do. */ if (NULL != retval) { PRBool unlock = PR_FALSE; /* ** If evicting, we need to free off the old stuff. */ if (PR_FALSE != evictContext) { unlock = PR_TRUE; /* ** We do not free the sorted run. ** The category code takes care of this. */ retval->mSortedRun = NULL; #if ST_WANT_GRAPHS /* ** There is no need to ** PR_Lock(retval->mImageLock) ** We are already under write lock for the entire structure. */ retval->mFootprintCached = PR_FALSE; retval->mTimevalCached = PR_FALSE; retval->mLifespanCached = PR_FALSE; retval->mWeightCached = PR_FALSE; #endif } /* ** If new or recently evicted, we need to fully init. */ if (PR_FALSE != newContext || PR_FALSE != evictContext) { unlock = PR_TRUE; retval->mSortedRun = createRunFromGlobal(&inCache->mItems[retval->mIndex]. mOptions, &inCache->mItems[retval->mIndex]. mContext); } /* ** If changing category, we need to do some sneaky stuff. */ if (PR_FALSE != changeCategoryContext) { STCategoryNode *node = NULL; unlock = PR_TRUE; /* ** Just a category change. We don't need to harvest. Just find the ** right node and set the cache.mSortedRun. We need to recompute ** cost though. But that is cheap. */ node = findCategoryNode(inCache->mItems[retval->mIndex].mOptions. mCategoryName, &globals); if (node) { /* Recalculate cost of run */ recalculateRunCost(&inCache->mItems[retval->mIndex]. mOptions, retval, node->runs[retval->mIndex]); retval->mSortedRun = node->runs[retval->mIndex]; } #if ST_WANT_GRAPHS /* ** There is no need to ** PR_Lock(retval->mImageLock) ** We are already under write lock for the entire structure. */ retval->mFootprintCached = PR_FALSE; retval->mTimevalCached = PR_FALSE; retval->mLifespanCached = PR_FALSE; retval->mWeightCached = PR_FALSE; #endif } /* ** Release the write lock if we took one to make changes. */ if (PR_FALSE != unlock) { PR_RWLock_Unlock(retval->mRWLock); } /* ** Last thing possible, take a read lock on our return value. ** This will cause us to block if the context is not fully ** initialized in another thread holding the write lock. */ PR_RWLock_Rlock(retval->mRWLock); } } return retval; } void contextRelease(STContext * inContext) /* ** After a successful call to contextLookup, one should call this API when ** done with the context. ** This effectively removes the usage of the client on a cached item. */ { STContextCache *inCache = &globals.mContextCache; if (NULL != inContext && NULL != inCache) { /* ** Own the context cache while in here. */ PR_Lock(inCache->mLock); /* ** Give up the read lock on the context. */ PR_RWLock_Unlock(inContext->mRWLock); /* ** Decrement the reference count on the context. ** If it was the last reference, notify that a new item is ** available for eviction. ** A waiting thread will wake up and eat it. ** Also set when it was last accessed so the oldest unused item ** can be targeted for eviction. */ inCache->mItems[inContext->mIndex].mReferenceCount--; if (0 == inCache->mItems[inContext->mIndex].mReferenceCount) { PR_NotifyCondVar(inCache->mCacheMiss); inCache->mItems[inContext->mIndex].mLastAccessed = PR_IntervalNow(); } /* ** Done with context cache. */ PR_Unlock(inCache->mLock); } } /* ** handleRequest ** ** Based on what file they are asking for, perform some processing. ** Output the results to aFD. ** ** Returns !0 on error. */ int handleRequest(tmreader * aTMR, PRFileDesc * aFD, const char *aFileName, const FormData * aGetData) { int retval = 0; if (NULL != aTMR && NULL != aFD && NULL != aFileName && '\0' != *aFileName) { STRequest request; /* ** Init the request. */ memset(&request, 0, sizeof(request)); request.mFD = aFD; request.mGetFileName = aFileName; request.mGetData = aGetData; /* ** Set local options for this request. */ initRequestOptions(&request); /* ** Get our cached context for this client. ** Simply based on the options. */ request.mContext = contextLookup(&request.mOptions); if (NULL != request.mContext) { /* ** Attempt to find the file of interest. */ if (handleLocalFile(&request, aFileName)) { displayFile(&request, aFileName); } else if (0 == strcmp("index.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Index"); displayRes = displayIndex(&request); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayIndex); } htmlFooter(&request); } else if (0 == strcmp("settings.html", aFileName) || 0 == strcmp("options.html", aFileName)) { htmlHeader(&request, "SpaceTrace Options"); displaySettings(&request); htmlFooter(&request); } else if (0 == strcmp("top_allocations.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Top Allocations Report"); displayRes = displayTopAllocations(&request, request.mContext->mSortedRun, "top-allocations", "SpaceTrace Top Allocations Report", 1); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayTopAllocations); } htmlFooter(&request); } else if (0 == strcmp("top_callsites.html", aFileName)) { int displayRes = 0; tmcallsite **array = NULL; PRUint32 arrayCount = 0; /* ** Display header after we figure out if we are going to focus ** on a category. */ htmlHeader(&request, "SpaceTrace Top Callsites Report"); if (NULL != request.mContext->mSortedRun && 0 < request.mContext->mSortedRun->mAllocationCount) { arrayCount = callsiteArrayFromRun(&array, 0, request.mContext->mSortedRun); if (0 != arrayCount && NULL != array) { displayRes = displayTopCallsites(&request, array, arrayCount, 0, "top-callsites", "Top Callsites Report", 0); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayTopCallsites); } /* ** Done with the array. */ free(array); array = NULL; } } else { retval = __LINE__; REPORT_ERROR(__LINE__, handleRequest); } htmlFooter(&request); } else if (0 == strcmp("memory_leaks.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Memory Leaks Report"); displayRes = displayMemoryLeaks(&request, request.mContext->mSortedRun); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayMemoryLeaks); } htmlFooter(&request); } else if (0 == strncmp("allocation_", aFileName, 11)) { int scanRes = 0; PRUint32 allocationIndex = 0; /* ** Oh, what a hack.... ** The index to the allocation structure in the global run ** is in the filename. Better than the pointer value.... */ scanRes = PR_sscanf(aFileName + 11, "%u", &allocationIndex); if (1 == scanRes && globals.mRun.mAllocationCount > allocationIndex && NULL != globals.mRun.mAllocations[allocationIndex]) { STAllocation *allocation = globals.mRun.mAllocations[allocationIndex]; char buffer[128]; int displayRes = 0; PR_snprintf(buffer, sizeof(buffer), "SpaceTrace Allocation %u Details Report", allocationIndex); htmlHeader(&request, buffer); displayRes = displayAllocationDetails(&request, allocation); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayAllocationDetails); } htmlFooter(&request); } else { htmlNotFound(&request); } } else if (0 == strncmp("callsite_", aFileName, 9)) { int scanRes = 0; PRUint32 callsiteSerial = 0; tmcallsite *resolved = NULL; /* ** Oh, what a hack.... ** The serial(key) to the callsite structure in the hash table ** is in the filename. Better than the pointer value.... */ scanRes = PR_sscanf(aFileName + 9, "%u", &callsiteSerial); if (1 == scanRes && 0 != callsiteSerial && NULL != (resolved = tmreader_callsite(aTMR, callsiteSerial))) { char buffer[128]; int displayRes = 0; PR_snprintf(buffer, sizeof(buffer), "SpaceTrace Callsite %u Details Report", callsiteSerial); htmlHeader(&request, buffer); displayRes = displayCallsiteDetails(&request, resolved); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayAllocationDetails); } htmlFooter(&request); } else { htmlNotFound(&request); } } else if (0 == strcmp("root_callsites.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Root Callsites"); displayRes = displayCallsites(&request, aTMR->calltree_root.kids, ST_FOLLOW_SIBLINGS, 0, "callsites-root", "SpaceTrace Root Callsites", __LINE__); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayCallsites); } htmlFooter(&request); } #if ST_WANT_GRAPHS else if (0 == strcmp("footprint_graph.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Memory Footprint Report"); PR_fprintf(request.mFD, "
\n"); PR_fprintf(request.mFD, "\n"); PR_fprintf(request.mFD, "
\n"); htmlFooter(&request); } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS else if (0 == strcmp("times_graph.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Allocation Times Report"); PR_fprintf(request.mFD, "
\n"); PR_fprintf(request.mFD, "\n"); PR_fprintf(request.mFD, "
\n"); htmlFooter(&request); } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS else if (0 == strcmp("lifespan_graph.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Allocation Lifespans Report"); PR_fprintf(request.mFD, "
\n"); PR_fprintf(request.mFD, "\n"); PR_fprintf(request.mFD, "
\n"); htmlFooter(&request); } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS else if (0 == strcmp("weight_graph.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "SpaceTrace Allocation Weights Report"); PR_fprintf(request.mFD, "
\n"); PR_fprintf(request.mFD, "\n"); PR_fprintf(request.mFD, "
\n"); htmlFooter(&request); } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS else if (0 == strcmp("footprint.png", aFileName)) { int graphRes = 0; graphRes = graphFootprint(&request, request.mContext->mSortedRun); if (0 != graphRes) { retval = __LINE__; REPORT_ERROR(__LINE__, graphFootprint); } } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS else if (0 == strcmp("times.png", aFileName)) { int graphRes = 0; graphRes = graphTimeval(&request, request.mContext->mSortedRun); if (0 != graphRes) { retval = __LINE__; REPORT_ERROR(__LINE__, graphTimeval); } } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS else if (0 == strcmp("lifespan.png", aFileName)) { int graphRes = 0; graphRes = graphLifespan(&request, request.mContext->mSortedRun); if (0 != graphRes) { retval = __LINE__; REPORT_ERROR(__LINE__, graphLifespan); } } #endif /* ST_WANT_GRAPHS */ #if ST_WANT_GRAPHS else if (0 == strcmp("weight.png", aFileName)) { int graphRes = 0; graphRes = graphWeight(&request, request.mContext->mSortedRun); if (0 != graphRes) { retval = __LINE__; REPORT_ERROR(__LINE__, graphWeight); } } #endif /* ST_WANT_GRAPHS */ else if (0 == strcmp("categories_summary.html", aFileName)) { int displayRes = 0; htmlHeader(&request, "Category Report"); displayRes = displayCategoryReport(&request, &globals.mCategoryRoot, 1); if (0 != displayRes) { retval = __LINE__; REPORT_ERROR(__LINE__, displayMemoryLeaks); } htmlFooter(&request); } else { htmlNotFound(&request); } /* ** Release the context we obtained earlier. */ contextRelease(request.mContext); request.mContext = NULL; } else { retval = __LINE__; REPORT_ERROR(__LINE__, contextObtain); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, handleRequest); } /* ** Compact a little if you can after each request. */ heapCompact(); return retval; } /* ** handleClient ** ** main() of the new client thread. ** Read the fd for the request. ** Output the results. */ void handleClient(void *inArg) { PRFileDesc *aFD = NULL; aFD = (PRFileDesc *) inArg; if (NULL != aFD) { PRStatus closeRes = PR_SUCCESS; char aBuffer[2048]; PRInt32 readRes = 0; readRes = PR_Read(aFD, aBuffer, sizeof(aBuffer)); if (0 <= readRes) { const char *sanityCheck = "GET /"; if (0 == strncmp(sanityCheck, aBuffer, 5)) { char *eourl = NULL; char *start = &aBuffer[5]; char *getData = NULL; int realFun = 0; const char *crlf = "\015\012"; char *eoline = NULL; FormData *fdGet = NULL; /* ** Truncate the line if possible. ** Only want first one. */ eoline = strstr(aBuffer, crlf); if (NULL != eoline) { *eoline = '\0'; } /* ** Find the whitespace. ** That is either end of line or the " HTTP/1.x" suffix. ** We do not care. */ for (eourl = start; 0 == isspace(*eourl) && '\0' != *eourl; eourl++) { /* ** No body. */ } /* ** Cap it off. ** Convert empty '/' to index.html. */ *eourl = '\0'; if ('\0' == *start) { strcpy(start, "index.html"); } /* ** Have we got any GET form data? */ getData = strchr(start, '?'); if (NULL != getData) { /* ** Whack it off. */ *getData = '\0'; getData++; } /* ** Convert get data into a more useful format. */ fdGet = FormData_Create(getData); /* ** This is totally a hack, but oh well.... ** ** Send that the request was OK, regardless. ** ** If we have any get data, then it is a set of options ** we attempt to apply. ** ** Other code will tell the user they were wrong or if ** there was an error. ** If the filename contains a ".png", then send the image ** mime type, otherwise, say it is text/html. */ PR_fprintf(aFD, "HTTP/1.1 200 OK%s", crlf); PR_fprintf(aFD, "Server: %s%s", "$Id: spacetrace.c,v 1.54 2006/11/01 23:02:17 timeless%mozdev.org Exp $", crlf); PR_fprintf(aFD, "Content-type: "); if (NULL != strstr(start, ".png")) { PR_fprintf(aFD, "image/png"); } else if (NULL != strstr(start, ".jpg")) { PR_fprintf(aFD, "image/jpeg"); } else if (NULL != strstr(start, ".txt")) { PR_fprintf(aFD, "text/plain"); } else if (NULL != strstr(start, ".css")) { PR_fprintf(aFD, "text/css"); } else { PR_fprintf(aFD, "text/html"); } PR_fprintf(aFD, crlf); /* ** One more to separate headers from content. */ PR_fprintf(aFD, crlf); /* ** Ready for the real fun. */ realFun = handleRequest(globals.mTMR, aFD, start, fdGet); if (0 != realFun) { REPORT_ERROR(__LINE__, handleRequest); } /* ** Free off get data if around. */ FormData_Destroy(fdGet); fdGet = NULL; } else { REPORT_ERROR(__LINE__, handleClient); } } else { REPORT_ERROR(__LINE__, lineReader); } /* ** Done with the connection. */ closeRes = PR_Close(aFD); if (PR_SUCCESS != closeRes) { REPORT_ERROR(__LINE__, PR_Close); } } else { REPORT_ERROR(__LINE__, handleClient); } } /* ** serverMode ** ** List on a port as a httpd. ** Output results interactively on demand. ** ** Returns !0 on error. */ int serverMode(void) { int retval = 0; PRFileDesc *socket = NULL; /* ** Create a socket. */ socket = PR_NewTCPSocket(); if (NULL != socket) { PRStatus closeRes = PR_SUCCESS; PRNetAddr bindAddr; PRStatus bindRes = PR_SUCCESS; /* ** Bind it to an interface/port. ** Any interface. */ bindAddr.inet.family = PR_AF_INET; bindAddr.inet.port = PR_htons((PRUint16) globals.mCommandLineOptions.mHttpdPort); bindAddr.inet.ip = PR_htonl(PR_INADDR_ANY); bindRes = PR_Bind(socket, &bindAddr); if (PR_SUCCESS == bindRes) { PRStatus listenRes = PR_SUCCESS; const int backlog = 0x20; /* ** Start listening for clients. ** Give a decent backlog, some of our processing will take ** a bit. */ listenRes = PR_Listen(socket, backlog); if (PR_SUCCESS == listenRes) { PRFileDesc *connection = NULL; int failureSum = 0; char message[80]; /* ** Output a little message saying we are receiving. */ PR_snprintf(message, sizeof(message), "server accepting connections at http://localhost:%u/", globals.mCommandLineOptions.mHttpdPort); REPORT_INFO(message); PR_fprintf(PR_STDOUT, "Peak memory used: %s bytes\n", FormatNumber(globals.mPeakMemoryUsed)); PR_fprintf(PR_STDOUT, "Allocations : %s total\n", FormatNumber(globals.mMallocCount + globals.mCallocCount + globals.mReallocCount), FormatNumber(globals.mFreeCount)); PR_fprintf(PR_STDOUT, "Breakdown : %s malloc\n", FormatNumber(globals.mMallocCount)); PR_fprintf(PR_STDOUT, " %s calloc\n", FormatNumber(globals.mCallocCount)); PR_fprintf(PR_STDOUT, " %s realloc\n", FormatNumber(globals.mReallocCount)); PR_fprintf(PR_STDOUT, " %s free\n", FormatNumber(globals.mFreeCount)); PR_fprintf(PR_STDOUT, "Leaks : %s\n", FormatNumber((globals.mMallocCount + globals.mCallocCount + globals.mReallocCount) - globals.mFreeCount)); /* ** Keep accepting until we know otherwise. ** ** We do a thread per connection. ** Up to the thread to close the connection when done. ** ** This is known by me to be suboptimal, and I would rather ** do a thread pool if it ever becomes a resource issue. ** Any issues would simply point to a need to get ** more machines or a beefier machine to handle the ** requests, as well as a need to do thread pooling and ** avoid thread creation overhead. ** The threads are not tracked, except possibly by NSPR ** itself and PR_Cleanup will wait on them all to exit as ** user threads so our shared data is valid. */ while (0 == retval) { connection = PR_Accept(socket, NULL, PR_INTERVAL_NO_TIMEOUT); if (NULL != connection) { PRThread *clientThread = NULL; /* ** Thread per connection. */ clientThread = PR_CreateThread(PR_USER_THREAD, /* PR_Cleanup sync */ handleClient, (void *) connection, PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, /* IO enabled */ PR_UNJOINABLE_THREAD, 0); if (NULL == clientThread) { PRStatus closeRes = PR_SUCCESS; failureSum += __LINE__; REPORT_ERROR(__LINE__, PR_Accept); /* ** Close the connection as well, no service */ closeRes = PR_Close(connection); if (PR_FAILURE == closeRes) { REPORT_ERROR(__LINE__, PR_Close); } } } else { failureSum += __LINE__; REPORT_ERROR(__LINE__, PR_Accept); } } if (0 != failureSum) { retval = __LINE__; } /* ** Output a little message saying it is all over. */ REPORT_INFO("server no longer accepting connections...."); } else { retval = __LINE__; REPORT_ERROR(__LINE__, PR_Listen); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, PR_Bind); } /* ** Done with socket. */ closeRes = PR_Close(socket); if (PR_SUCCESS != closeRes) { retval = __LINE__; REPORT_ERROR(__LINE__, PR_Close); } socket = NULL; } else { retval = __LINE__; REPORT_ERROR(__LINE__, PR_NewTCPSocket); } return retval; } /* ** batchMode ** ** Perform whatever batch requests we were asked to do. */ int batchMode(void) { int retval = 0; if (0 != globals.mCommandLineOptions.mBatchRequestCount) { PRUint32 loop = 0; int failureSum = 0; int handleRes = 0; char aFileName[1024]; PRUint32 sprintfRes = 0; /* ** Go through and process the various files requested. ** We do not stop on failure, as it is too costly to rerun the ** batch job. */ for (loop = 0; loop < globals.mCommandLineOptions.mBatchRequestCount; loop++) { sprintfRes = PR_snprintf(aFileName, sizeof(aFileName), "%s%c%s", globals.mCommandLineOptions.mOutputDir, PR_GetDirectorySeparator(), globals.mCommandLineOptions.mBatchRequest[loop]); if ((PRUint32) - 1 != sprintfRes) { PRFileDesc *outFile = NULL; outFile = PR_Open(aFileName, ST_FLAGS, ST_PERMS); if (NULL != outFile) { PRStatus closeRes = PR_SUCCESS; handleRes = handleRequest(globals.mTMR, outFile, globals.mCommandLineOptions. mBatchRequest[loop], NULL); if (0 != handleRes) { failureSum += __LINE__; REPORT_ERROR(__LINE__, handleRequest); } closeRes = PR_Close(outFile); if (PR_SUCCESS != closeRes) { failureSum += __LINE__; REPORT_ERROR(__LINE__, PR_Close); } } else { failureSum += __LINE__; REPORT_ERROR(__LINE__, PR_Open); } } else { failureSum += __LINE__; REPORT_ERROR(__LINE__, PR_snprintf); } } if (0 != failureSum) { retval = __LINE__; } } else { retval = __LINE__; REPORT_ERROR(__LINE__, outputReports); } return retval; } /* ** doRun ** ** Perform the actual processing this program requires. ** Returns !0 on failure. */ int doRun(void) { int retval = 0; /* ** Create the new trace-malloc reader. */ globals.mTMR = tmreader_new(globals.mProgramName, NULL); if (NULL != globals.mTMR) { int tmResult = 0; int outputResult = 0; #if defined(DEBUG_dp) PRIntervalTime start = PR_IntervalNow(); fprintf(stderr, "DEBUG: reading tracemalloc data...\n"); #endif tmResult = tmreader_eventloop(globals.mTMR, globals.mCommandLineOptions.mFileName, tmEventHandler); printf("\rReading... Done.\n"); #if defined(DEBUG_dp) fprintf(stderr, "DEBUG: reading tracemalloc data ends: %dms [%d allocations]\n", PR_IntervalToMilliseconds(PR_IntervalNow() - start), globals.mRun.mAllocationCount); #endif if (0 == tmResult) { REPORT_ERROR(__LINE__, tmreader_eventloop); retval = __LINE__; } if (0 == retval) { /* ** Decide if we're going into batch mode or server mode. */ if (0 != globals.mCommandLineOptions.mBatchRequestCount) { /* ** Output in one big step while everything still exists. */ outputResult = batchMode(); if (0 != outputResult) { REPORT_ERROR(__LINE__, batchMode); retval = __LINE__; } } else { int serverRes = 0; /* ** httpd time. */ serverRes = serverMode(); if (0 != serverRes) { REPORT_ERROR(__LINE__, serverMode); retval = __LINE__; } } /* ** Clear our categorization tree */ freeCategories(&globals); } } else { REPORT_ERROR(__LINE__, tmreader_new); retval = __LINE__; } return retval; } int initCaches(void) /* ** Initialize the global caches. ** More involved since we have to allocated/create some objects. ** ** returns Zero if all is well. ** Non-zero on error. */ { int retval = 0; STContextCache *inCache = &globals.mContextCache; if (NULL != inCache && 0 != globals.mCommandLineOptions.mContexts) { inCache->mLock = PR_NewLock(); if (NULL != inCache->mLock) { inCache->mCacheMiss = PR_NewCondVar(inCache->mLock); if (NULL != inCache->mCacheMiss) { inCache->mItems = (STContextCacheItem *) calloc(globals.mCommandLineOptions. mContexts, sizeof(STContextCacheItem)); if (NULL != inCache->mItems) { PRUint32 loop = 0; char buffer[64]; inCache->mItemCount = globals.mCommandLineOptions.mContexts; /* ** Init each item as needed. */ for (loop = 0; loop < inCache->mItemCount; loop++) { inCache->mItems[loop].mContext.mIndex = loop; PR_snprintf(buffer, sizeof(buffer), "Context Item %d RW Lock", loop); inCache->mItems[loop].mContext.mRWLock = PR_NewRWLock(PR_RWLOCK_RANK_NONE, buffer); if (NULL == inCache->mItems[loop].mContext.mRWLock) { break; } #if ST_WANT_GRAPHS inCache->mItems[loop].mContext.mImageLock = PR_NewLock(); if (NULL == inCache->mItems[loop].mContext.mImageLock) { break; } #endif } if (loop != inCache->mItemCount) { retval = __LINE__; REPORT_ERROR(__LINE__, initCaches); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, calloc); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, PR_NewCondVar); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, PR_NewLock); } } else { retval = __LINE__; REPORT_ERROR(__LINE__, initCaches); } return retval; } int destroyCaches(void) /* ** Clean up any global caches we have laying around. ** ** returns Zero if all is well. ** Non-zero on error. */ { int retval = 0; STContextCache *inCache = &globals.mContextCache; if (NULL != inCache) { PRUint32 loop = 0; /* ** Uninit item data one by one. */ for (loop = 0; loop < inCache->mItemCount; loop++) { if (NULL != inCache->mItems[loop].mContext.mRWLock) { PR_DestroyRWLock(inCache->mItems[loop].mContext.mRWLock); inCache->mItems[loop].mContext.mRWLock = NULL; } #if ST_WANT_GRAPHS if (NULL != inCache->mItems[loop].mContext.mImageLock) { PR_DestroyLock(inCache->mItems[loop].mContext.mImageLock); inCache->mItems[loop].mContext.mImageLock = NULL; } #endif } inCache->mItemCount = 0; if (NULL != inCache->mItems) { free(inCache->mItems); inCache->mItems = NULL; } if (NULL != inCache->mCacheMiss) { PR_DestroyCondVar(inCache->mCacheMiss); inCache->mCacheMiss = NULL; } if (NULL != inCache->mLock) { PR_DestroyLock(inCache->mLock); inCache->mLock = NULL; } } else { retval = __LINE__; REPORT_ERROR(__LINE__, destroyCaches); } return retval; } /* ** main ** ** Process entry and exit. */ int main(int aArgCount, char **aArgArray) { int retval = 0; int optionsResult = 0; PRStatus prResult = PR_SUCCESS; int showedHelp = 0; int looper = 0; int cacheResult = 0; /* ** NSPR init. */ PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0); /* ** Initialize globals */ memset(&globals, 0, sizeof(globals)); /* ** Set the program name. */ globals.mProgramName = aArgArray[0]; /* ** Set the minimum timeval really high so other code ** that checks the timeval will get it right. */ globals.mMinTimeval = ST_TIMEVAL_MAX; /* ** Handle initializing options. */ optionsResult = initOptions(aArgCount, aArgArray); if (0 != optionsResult) { REPORT_ERROR(optionsResult, initOptions); retval = __LINE__; } /* ** Initialize our caches. */ cacheResult = initCaches(); if (0 != cacheResult) { retval = __LINE__; REPORT_ERROR(__LINE__, initCaches); } /* ** Small alloc code init. */ globals.mCategoryRoot.runs = (STRun **) calloc(globals.mCommandLineOptions.mContexts, sizeof(STRun *)); if (NULL == globals.mCategoryRoot.runs) { retval = __LINE__; REPORT_ERROR(__LINE__, calloc); } /* ** Show help on usage if need be. */ showedHelp = showHelp(); /* ** Only perform the run if everything is checking out. */ if (0 == showedHelp && 0 == retval) { int runResult = 0; runResult = doRun(); if (0 != runResult) { REPORT_ERROR(runResult, doRun); retval = __LINE__; } } if (0 != retval) { REPORT_ERROR(retval, main); } /* ** Have NSPR join all client threads we started. */ prResult = PR_Cleanup(); if (PR_SUCCESS != prResult) { REPORT_ERROR(retval, PR_Cleanup); retval = __LINE__; } /* ** All threads are joined/done by this line. */ /* ** Options allocated a little. */ #define ST_CMD_OPTION_STRING_PTR_ARRAY(option_name, option_genre, option_help) \ if(NULL != globals.mCommandLineOptions.m##option_name) \ { \ free((void*)globals.mCommandLineOptions.m##option_name); \ globals.mCommandLineOptions.m##option_name = NULL; \ globals.mCommandLineOptions.m##option_name##Count = 0; \ } #include "stoptions.h" /* ** globals has a small modification to clear up. */ if (NULL != globals.mCategoryRoot.runs) { free(globals.mCategoryRoot.runs); globals.mCategoryRoot.runs = NULL; } /* ** Blow away our caches. */ cacheResult = destroyCaches(); if (0 != cacheResult) { retval = __LINE__; REPORT_ERROR(__LINE__, initCaches); } /* ** We are safe to kill our tmreader data. */ if (NULL != globals.mTMR) { tmreader_destroy(globals.mTMR); globals.mTMR = NULL; } return retval; }