#!/bin/sh
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 2000-2009
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# This is just a quick script so we can still run our testcases.
# Longer term we need a scriptable test environment..
#
. ../common/init.sh
CURDIR=`pwd`
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
CURDIR=`cygpath -m ${CURDIR}`
fi
CIPHERDIR=${HOSTDIR}/cipher
SKTESTS=${CURDIR}/symmkey.txt
RSATESTS=${CURDIR}/rsa.txt
DSATESTS=${CURDIR}/dsa.txt
HASHTESTS=${CURDIR}/hash.txt
SKPERFOUT=${CIPHERDIR}/skperfout.data
RSAPERFOUT=${CIPHERDIR}/rsaperfout.data
DSAPERFOUT=${CIPHERDIR}/dsaperfout.data
HASHPERFOUT=${CIPHERDIR}/hashperfout.data
PERFRESULTS=${HOSTDIR}/performance.html
echo "" >> ${PERFRESULTS}
mkdir -p ${CIPHERDIR}
cd ${CIPHERDIR}
if [ -z $1 ]; then
TESTSET="all"
else
TESTSET=$1
fi
if [ $TESTSET = "all" -o $TESTSET = "symmkey" ]; then
echo "| Symmetric Key Cipher Performance |
|---|
" >> ${PERFRESULTS}
echo "| MODE | INPUT SIZE (bytes) | SYMMETRIC KEY SIZE (bits) | REPETITIONS (cx/op) | CONTEXT CREATION TIME (ms) | OPERATION TIME (ms) |
|---|
" >> ${PERFRESULTS}
while read mode keysize bufsize reps cxreps
do
if [ $mode != "#" ]; then
echo "bltest -N -m $mode -b $bufsize -g $keysize -u $cxreps"
${BINDIR}/bltest -N -m $mode -b $bufsize -g $keysize -u $cxreps >> ${SKPERFOUT}
mv "tmp.in.0" "$mode.in"
mv tmp.key $mode.key
if [ -f tmp.iv ]; then
mv tmp.iv $mode.iv
fi
echo "bltest -E -m $mode -i ${CIPHERDIR}/$mode.in -k ${CIPHERDIR}/$mode.key -v ${CIPHERDIR}/$mode.iv -p $reps -o ${CIPHERDIR}/$mode.out"
${BINDIR}/bltest -E -m $mode -i ${CIPHERDIR}/$mode.in -k ${CIPHERDIR}/$mode.key -v ${CIPHERDIR}/$mode.iv -p $reps -o ${CIPHERDIR}/$mode.out >> ${SKPERFOUT}
echo "bltest -D -m $mode -i ${CIPHERDIR}/$mode.out -k ${CIPHERDIR}/$mode.key -v ${CIPHERDIR}/$mode.iv -p $reps -o ${CIPHERDIR}/$mode.inv"
${BINDIR}/bltest -D -m $mode -i ${CIPHERDIR}/$mode.out -k ${CIPHERDIR}/$mode.key -v ${CIPHERDIR}/$mode.iv -p $reps -o ${CIPHERDIR}/$mode.inv >> ${SKPERFOUT}
fi
done < ${SKTESTS}
while read md buf sk rps cxrps cx op
do
if [ $md != "#" ]; then
echo "| $md | $buf | $sk | $cxrps/$rps | $cx | $op |
|---|
" >> ${PERFRESULTS}
fi
done < ${SKPERFOUT}
echo "
" >> ${PERFRESULTS}
fi
if [ $TESTSET = "all" -o $TESTSET = "rsa" ]; then
while read mode keysize bufsize exp reps cxreps
do
if [ $mode != "#" ]; then
echo "bltest -N -m $mode -b $bufsize -e $exp -g $keysize -u $cxreps"
${BINDIR}/bltest -N -m $mode -b $bufsize -e $exp -g $keysize -u $cxreps >> ${RSAPERFOUT}
mv "tmp.in.0" "$mode.in"
mv tmp.key $mode.key
echo "bltest -E -m $mode -i ${CIPHERDIR}/$mode.in -k ${CIPHERDIR}/$mode.key -p $reps -o ${CIPHERDIR}/$mode.out"
${BINDIR}/bltest -E -m $mode -i ${CIPHERDIR}/$mode.in -k ${CIPHERDIR}/$mode.key -p $reps -o ${CIPHERDIR}/$mode.out >> ${RSAPERFOUT}
echo "bltest -D -m $mode -i ${CIPHERDIR}/$mode.out -k ${CIPHERDIR}/$mode.key -p $reps -o ${CIPHERDIR}/$mode.inv"
${BINDIR}/bltest -D -m $mode -i ${CIPHERDIR}/$mode.out -k ${CIPHERDIR}/$mode.key -p $reps -o ${CIPHERDIR}/$mode.inv >> ${RSAPERFOUT}
fi
done < ${RSATESTS}
echo "| RSA Cipher Performance |
|---|
" >> ${PERFRESULTS}
echo "| MODE | INPUT SIZE (bytes) | KEY SIZE (bits) | PUBLIC EXPONENT | REPETITIONS (cx/op) | CONTEXT CREATION TIME (ms) | OPERATION TIME (ms) |
|---|
" >> ${PERFRESULTS}
while read md buf mod pe rps cxrps cx op
do
if [ $md != "#" ]; then
echo "| $md | $buf | $mod | $pe | $cxrps/$rps | $cx | $op |
|---|
" >> ${PERFRESULTS}
fi
done < ${RSAPERFOUT}
echo "
" >> ${PERFRESULTS}
fi
if [ $TESTSET = "all" -o $TESTSET = "dsa" ]; then
while read mode keysize bufsize reps cxreps
do
if [ $mode != "#" ]; then
echo "bltest -N -m $mode -b $bufsize -g $keysize -u $cxreps"
${BINDIR}/bltest -N -m $mode -b $bufsize -g $keysize -u $cxreps >> ${DSAPERFOUT}
mv "tmp.in.0" "$mode.in"
mv tmp.key $mode.key
echo "bltest -S -m $mode -i ${CIPHERDIR}/$mode.in -k ${CIPHERDIR}/$mode.key -p $reps -o ${CIPHERDIR}/$mode.out"
${BINDIR}/bltest -S -m $mode -i ${CIPHERDIR}/$mode.in -k ${CIPHERDIR}/$mode.key -p $reps -o ${CIPHERDIR}/$mode.out >> ${DSAPERFOUT}
echo "bltest -V -m $mode -f ${CIPHERDIR}/$mode.out -k ${CIPHERDIR}/$mode.key -p $reps -i ${CIPHERDIR}/$mode.in -o ${CIPHERDIR}/$mode.out"
${BINDIR}/bltest -V -m $mode -f ${CIPHERDIR}/$mode.out -k ${CIPHERDIR}/$mode.key -p $reps -i ${CIPHERDIR}/$mode.in -o ${CIPHERDIR}/$mode.out >> ${DSAPERFOUT}
fi
done < ${DSATESTS}
echo "| DSA Cipher Performance |
|---|
" >> ${PERFRESULTS}
echo "| MODE | INPUT SIZE (bytes) | KEY SIZE (bits) | REPETITIONS (cx/op) | CONTEXT CREATION TIME (ms) | OPERATION TIME (ms) |
|---|
" >> ${PERFRESULTS}
while read md buf mod rps cxrps cx op
do
if [ $md != "#" ]; then
echo "| $md | $buf | $mod | $cxrps/$rps | $cx | $op |
|---|
" >> ${PERFRESULTS}
fi
done < ${DSAPERFOUT}
echo "
" >> ${PERFRESULTS}
fi
if [ $TESTSET = "all" -o $TESTSET = "hash" ]; then
while read mode bufsize reps
do
if [ $mode != "#" ]; then
echo "bltest -N -m $mode -b $bufsize"
${BINDIR}/bltest -N -m $mode -b $bufsize
mv "tmp.in.0" "$mode.in"
echo "bltest -H -m $mode -i ${CIPHERDIR}/$mode.in -p $reps -o ${CIPHERDIR}/$mode.out"
${BINDIR}/bltest -H -m $mode -i ${CIPHERDIR}/$mode.in -p $reps -o ${CIPHERDIR}/$mode.out >> ${HASHPERFOUT}
fi
done < ${HASHTESTS}
echo "| Hash Cipher Performance |
|---|
" >> ${PERFRESULTS}
echo "| MODE | INPUT SIZE (bytes) | REPETITIONS | OPERATION TIME (ms) |
|---|
" >> ${PERFRESULTS}
while read md buf rps cxrps cx op
do
if [ $md != "#" ]; then
echo "| $md | $buf | $rps | $op |
|---|
" >> ${PERFRESULTS}
fi
done < ${HASHPERFOUT}
echo "
" >> ${PERFRESULTS}
fi
#rm -f ${TEMPFILES}
cd ${CURDIR}
echo "" >> ${PERFRESULTS}