/* vim:set ts=2 sw=2 sts=2 et tw=80: * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is the Source Editor component. * * The Initial Developer of the Original Code is * The Mozilla Foundation. * Portions created by the Initial Developer are Copyright (C) 2011 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Mihai Sucan (original author) * Spyros Livathinos * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK *****/ "use strict"; const Cu = Components.utils; Cu.import("resource://gre/modules/Services.jsm"); Cu.import("resource://gre/modules/XPCOMUtils.jsm"); Cu.import("resource:///modules/source-editor-ui.jsm"); const PREF_EDITOR_COMPONENT = "devtools.editor.component"; const SOURCEEDITOR_L10N = "chrome://browser/locale/devtools/sourceeditor.properties"; var component = Services.prefs.getCharPref(PREF_EDITOR_COMPONENT); var obj = {}; try { if (component == "ui") { throw new Error("The ui editor component is not available."); } Cu.import("resource:///modules/source-editor-" + component + ".jsm", obj); } catch (ex) { Cu.reportError(ex); Cu.reportError("SourceEditor component failed to load: " + component); // If the component does not exist, clear the user pref back to the default. Services.prefs.clearUserPref(PREF_EDITOR_COMPONENT); // Load the default editor component. component = Services.prefs.getCharPref(PREF_EDITOR_COMPONENT); Cu.import("resource:///modules/source-editor-" + component + ".jsm", obj); } // Export the SourceEditor. var SourceEditor = obj.SourceEditor; var EXPORTED_SYMBOLS = ["SourceEditor"]; // Add the constants used by all SourceEditors. XPCOMUtils.defineLazyGetter(SourceEditorUI, "strings", function() { return Services.strings.createBundle(SOURCEEDITOR_L10N); }); /** * Known SourceEditor preferences. */ SourceEditor.PREFS = { TAB_SIZE: "devtools.editor.tabsize", EXPAND_TAB: "devtools.editor.expandtab", COMPONENT: PREF_EDITOR_COMPONENT, }; /** * Predefined source editor modes for JavaScript, CSS and other languages. */ SourceEditor.MODES = { JAVASCRIPT: "js", CSS: "css", TEXT: "text", HTML: "html", XML: "xml", }; /** * Predefined themes for syntax highlighting. */ SourceEditor.THEMES = { MOZILLA: "mozilla", }; /** * Source editor configuration defaults. * @see SourceEditor.init */ SourceEditor.DEFAULTS = { /** * The text you want shown when the editor opens up. * @type string */ initialText: "", /** * The editor mode, based on the file type you want to edit. You can use one of * the predefined modes. * * @see SourceEditor.MODES * @type string */ mode: SourceEditor.MODES.TEXT, /** * The syntax highlighting theme you want. You can use one of the predefined * themes, or you can point to your CSS file. * * @see SourceEditor.THEMES. * @type string */ theme: SourceEditor.THEMES.MOZILLA, /** * How many steps should the undo stack hold. * @type number */ undoLimit: 200, /** * Define how many spaces to use for a tab character. This value is overridden * by a user preference, see SourceEditor.PREFS.TAB_SIZE. * * @type number */ tabSize: 4, /** * Tells if you want tab characters to be expanded to spaces. This value is * overridden by a user preference, see SourceEditor.PREFS.EXPAND_TAB. * @type boolean */ expandTab: true, /** * Tells if you want the editor to be read only or not. * @type boolean */ readOnly: false, /** * Display the line numbers gutter. * @type boolean */ showLineNumbers: false, /** * Display the annotations gutter/ruler. This gutter currently supports * annotations of breakpoint type. * @type boolean */ showAnnotationRuler: false, /** * Display the overview gutter/ruler. This gutter presents an overview of the * current annotations in the editor, for example the breakpoints. * @type boolean */ showOverviewRuler: false, /** * Highlight the current line. * @type boolean */ highlightCurrentLine: true, /** * An array of objects that allows you to define custom editor keyboard * bindings. Each object can have: * - action - name of the editor action to invoke. * - code - keyCode for the shortcut. * - accel - boolean for the Accel key (Cmd on Macs, Ctrl on Linux/Windows). * - shift - boolean for the Shift key. * - alt - boolean for the Alt key. * - callback - optional function to invoke, if the action is not predefined * in the editor. * @type array */ keys: null, }; /** * Known editor events you can listen for. */ SourceEditor.EVENTS = { /** * The contextmenu event is fired when the editor context menu is invoked. The * event object properties: * - x - the pointer location on the x axis, relative to the document the * user is editing. * - y - the pointer location on the y axis, relative to the document the * user is editing. * - screenX - the pointer location on the x axis, relative to the screen. * This value comes from the DOM contextmenu event.screenX property. * - screenY - the pointer location on the y axis, relative to the screen. * This value comes from the DOM contextmenu event.screenY property. */ CONTEXT_MENU: "ContextMenu", /** * The TextChanged event is fired when the editor content changes. The event * object properties: * - start - the character offset in the document where the change has * occured. * - removedCharCount - the number of characters removed from the document. * - addedCharCount - the number of characters added to the document. */ TEXT_CHANGED: "TextChanged", /** * The Selection event is fired when the editor selection changes. The event * object properties: * - oldValue - the old selection range. * - newValue - the new selection range. * Both ranges are objects which hold two properties: start and end. */ SELECTION: "Selection", /** * The focus event is fired when the editor is focused. */ FOCUS: "Focus", /** * The blur event is fired when the editor goes out of focus. */ BLUR: "Blur", /** * The MouseMove event is sent when the user moves the mouse over a line * annotation. The event object properties: * - event - the DOM mousemove event object. * - x and y - the mouse coordinates relative to the document being edited. */ MOUSE_MOVE: "MouseMove", /** * The MouseOver event is sent when the mouse pointer enters a line * annotation. The event object properties: * - event - the DOM mouseover event object. * - x and y - the mouse coordinates relative to the document being edited. */ MOUSE_OVER: "MouseOver", /** * This MouseOut event is sent when the mouse pointer exits a line * annotation. The event object properties: * - event - the DOM mouseout event object. * - x and y - the mouse coordinates relative to the document being edited. */ MOUSE_OUT: "MouseOut", /** * The BreakpointChange event is fired when a new breakpoint is added or when * a breakpoint is removed - either through API use or through the editor UI. * Event object properties: * - added - array that holds the new breakpoints. * - removed - array that holds the breakpoints that have been removed. * Each object in the added/removed arrays holds two properties: line and * condition. */ BREAKPOINT_CHANGE: "BreakpointChange", }; /** * Extend a destination object with properties from a source object. * * @param object aDestination * @param object aSource */ function extend(aDestination, aSource) { for (let name in aSource) { if (!aDestination.hasOwnProperty(name)) { aDestination[name] = aSource[name]; } } } /** * Add methods common to all components. */ extend(SourceEditor.prototype, { _lastFind: null, /** * Find a string in the editor. * * @param string aString * The string you want to search for. If |aString| is not given the * currently selected text is used. * @param object [aOptions] * Optional find options: * - start: (integer) offset to start searching from. Default: 0 if * backwards is false. If backwards is true then start = text.length. * - ignoreCase: (boolean) tells if you want the search to be case * insensitive or not. Default: false. * - backwards: (boolean) tells if you want the search to go backwards * from the given |start| offset. Default: false. * @return integer * The offset where the string was found. */ find: function SE_find(aString, aOptions) { if (typeof(aString) != "string") { return -1; } aOptions = aOptions || {}; let str = aOptions.ignoreCase ? aString.toLowerCase() : aString; let text = this.getText(); if (aOptions.ignoreCase) { text = text.toLowerCase(); } let index = aOptions.backwards ? text.lastIndexOf(str, aOptions.start) : text.indexOf(str, aOptions.start); let lastFoundIndex = index; if (index == -1 && this.lastFind && this.lastFind.index > -1 && this.lastFind.str === aString && this.lastFind.ignoreCase === !!aOptions.ignoreCase) { lastFoundIndex = this.lastFind.index; } this._lastFind = { str: aString, index: index, lastFound: lastFoundIndex, ignoreCase: !!aOptions.ignoreCase, }; return index; }, /** * Find the next occurrence of the last search operation. * * @param boolean aWrap * Tells if you want to restart the search from the beginning of the * document if the string is not found. * @return integer * The offset where the string was found. */ findNext: function SE_findNext(aWrap) { if (!this.lastFind && this.lastFind.lastFound == -1) { return -1; } let options = { start: this.lastFind.lastFound + this.lastFind.str.length, ignoreCase: this.lastFind.ignoreCase, }; let index = this.find(this.lastFind.str, options); if (index == -1 && aWrap) { options.start = 0; index = this.find(this.lastFind.str, options); } return index; }, /** * Find the previous occurrence of the last search operation. * * @param boolean aWrap * Tells if you want to restart the search from the end of the * document if the string is not found. * @return integer * The offset where the string was found. */ findPrevious: function SE_findPrevious(aWrap) { if (!this.lastFind && this.lastFind.lastFound == -1) { return -1; } let options = { start: this.lastFind.lastFound - this.lastFind.str.length, ignoreCase: this.lastFind.ignoreCase, backwards: true, }; let index; if (options.start > 0) { index = this.find(this.lastFind.str, options); } else { index = this._lastFind.index = -1; } if (index == -1 && aWrap) { options.start = this.getCharCount() - 1; index = this.find(this.lastFind.str, options); } return index; }, }); /** * Retrieve the last find operation result. This object holds the following * properties: * - str: the last search string. * - index: stores the result of the most recent find operation. This is the * index in the text where |str| was found or -1 otherwise. * - lastFound: tracks the index where |str| was last found, throughout * multiple find operations. This can be -1 if |str| was never found in the * document. * - ignoreCase: tells if the search was case insensitive or not. * @type object */ Object.defineProperty(SourceEditor.prototype, "lastFind", { get: function() { return this._lastFind; }, enumerable: true, configurable: true, });