/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ // vim:cindent:ts=2:et:sw=2: /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Steve Clark * Robert O'Callahan * L. David Baron * IBM Corporation * Mats Palmgren * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ /* * rendering object for CSS display:block and display:list-item objects, * also used inside table cells */ #include "nsCOMPtr.h" #include "nsBlockFrame.h" #include "nsBlockReflowContext.h" #include "nsBlockReflowState.h" #include "nsBlockBandData.h" #include "nsBulletFrame.h" #include "nsLineBox.h" #include "nsInlineFrame.h" #include "nsLineLayout.h" #include "nsPlaceholderFrame.h" #include "nsStyleConsts.h" #include "nsFrameManager.h" #include "nsPresContext.h" #include "nsIPresShell.h" #include "nsStyleContext.h" #include "nsIView.h" #include "nsIFontMetrics.h" #include "nsHTMLParts.h" #include "nsGkAtoms.h" #include "nsIDOMEvent.h" #include "nsGenericHTMLElement.h" #include "prprf.h" #include "nsStyleChangeList.h" #include "nsFrameSelection.h" #include "nsSpaceManager.h" #include "nsIntervalSet.h" #include "prenv.h" #include "plstr.h" #include "nsGUIEvent.h" #include "nsLayoutErrors.h" #include "nsAutoPtr.h" #include "nsIServiceManager.h" #include "nsIScrollableFrame.h" #ifdef ACCESSIBILITY #include "nsIDOMHTMLDocument.h" #include "nsIAccessibilityService.h" #endif #include "nsLayoutUtils.h" #include "nsBoxLayoutState.h" #include "nsDisplayList.h" #include "nsContentErrors.h" #include "nsCSSAnonBoxes.h" #ifdef IBMBIDI #include "nsBidiPresUtils.h" #endif // IBMBIDI #include "nsIDOMHTMLBodyElement.h" #include "nsIDOMHTMLHtmlElement.h" static const int MIN_LINES_NEEDING_CURSOR = 20; #ifdef DEBUG #include "nsPrintfCString.h" #include "nsBlockDebugFlags.h" PRBool nsBlockFrame::gLamePaintMetrics; PRBool nsBlockFrame::gLameReflowMetrics; PRBool nsBlockFrame::gNoisy; PRBool nsBlockFrame::gNoisyDamageRepair; PRBool nsBlockFrame::gNoisyIntrinsic; PRBool nsBlockFrame::gNoisyReflow; PRBool nsBlockFrame::gReallyNoisyReflow; PRBool nsBlockFrame::gNoisySpaceManager; PRBool nsBlockFrame::gVerifyLines; PRBool nsBlockFrame::gDisableResizeOpt; PRInt32 nsBlockFrame::gNoiseIndent; struct BlockDebugFlags { const char* name; PRBool* on; }; static const BlockDebugFlags gFlags[] = { { "reflow", &nsBlockFrame::gNoisyReflow }, { "really-noisy-reflow", &nsBlockFrame::gReallyNoisyReflow }, { "intrinsic", &nsBlockFrame::gNoisyIntrinsic }, { "space-manager", &nsBlockFrame::gNoisySpaceManager }, { "verify-lines", &nsBlockFrame::gVerifyLines }, { "damage-repair", &nsBlockFrame::gNoisyDamageRepair }, { "lame-paint-metrics", &nsBlockFrame::gLamePaintMetrics }, { "lame-reflow-metrics", &nsBlockFrame::gLameReflowMetrics }, { "disable-resize-opt", &nsBlockFrame::gDisableResizeOpt }, }; #define NUM_DEBUG_FLAGS (sizeof(gFlags) / sizeof(gFlags[0])) static void ShowDebugFlags() { printf("Here are the available GECKO_BLOCK_DEBUG_FLAGS:\n"); const BlockDebugFlags* bdf = gFlags; const BlockDebugFlags* end = gFlags + NUM_DEBUG_FLAGS; for (; bdf < end; bdf++) { printf(" %s\n", bdf->name); } printf("Note: GECKO_BLOCK_DEBUG_FLAGS is a comma separated list of flag\n"); printf("names (no whitespace)\n"); } void nsBlockFrame::InitDebugFlags() { static PRBool firstTime = PR_TRUE; if (firstTime) { firstTime = PR_FALSE; char* flags = PR_GetEnv("GECKO_BLOCK_DEBUG_FLAGS"); if (flags) { PRBool error = PR_FALSE; for (;;) { char* cm = PL_strchr(flags, ','); if (cm) *cm = '\0'; PRBool found = PR_FALSE; const BlockDebugFlags* bdf = gFlags; const BlockDebugFlags* end = gFlags + NUM_DEBUG_FLAGS; for (; bdf < end; bdf++) { if (PL_strcasecmp(bdf->name, flags) == 0) { *(bdf->on) = PR_TRUE; printf("nsBlockFrame: setting %s debug flag on\n", bdf->name); gNoisy = PR_TRUE; found = PR_TRUE; break; } } if (!found) { error = PR_TRUE; } if (!cm) break; *cm = ','; flags = cm + 1; } if (error) { ShowDebugFlags(); } } } } #endif // add in a sanity check for absurdly deep frame trees. See bug 42138 // can't just use IsFrameTreeTooDeep() because that method has side effects we don't want #define MAX_DEPTH_FOR_LIST_RENUMBERING 200 // 200 open displayable tags is pretty unrealistic //---------------------------------------------------------------------- // Debugging support code #ifdef DEBUG const char* nsBlockFrame::kReflowCommandType[] = { "ContentChanged", "StyleChanged", "ReflowDirty", "Timeout", "UserDefined", }; #endif #ifdef REALLY_NOISY_FIRST_LINE static void DumpStyleGeneaology(nsIFrame* aFrame, const char* gap) { fputs(gap, stdout); nsFrame::ListTag(stdout, aFrame); printf(": "); nsStyleContext* sc = aFrame->GetStyleContext(); while (nsnull != sc) { nsStyleContext* psc; printf("%p ", sc); psc = sc->GetParent(); sc = psc; } printf("\n"); } #endif #ifdef REFLOW_STATUS_COVERAGE static void RecordReflowStatus(PRBool aChildIsBlock, nsReflowStatus aFrameReflowStatus) { static PRUint32 record[2]; // 0: child-is-block // 1: child-is-inline PRIntn index = 0; if (!aChildIsBlock) index |= 1; // Compute new status PRUint32 newS = record[index]; if (NS_INLINE_IS_BREAK(aFrameReflowStatus)) { if (NS_INLINE_IS_BREAK_BEFORE(aFrameReflowStatus)) { newS |= 1; } else if (NS_FRAME_IS_NOT_COMPLETE(aFrameReflowStatus)) { newS |= 2; } else { newS |= 4; } } else if (NS_FRAME_IS_NOT_COMPLETE(aFrameReflowStatus)) { newS |= 8; } else { newS |= 16; } // Log updates to the status that yield different values if (record[index] != newS) { record[index] = newS; printf("record(%d): %02x %02x\n", index, record[0], record[1]); } } #endif //---------------------------------------------------------------------- const nsIID kBlockFrameCID = NS_BLOCK_FRAME_CID; nsIFrame* NS_NewBlockFrame(nsIPresShell* aPresShell, nsStyleContext* aContext, PRUint32 aFlags) { nsBlockFrame* it = new (aPresShell) nsBlockFrame(aContext); if (it) { it->SetFlags(aFlags); } return it; } nsBlockFrame::~nsBlockFrame() { } void nsBlockFrame::Destroy() { if (mState & NS_FRAME_GENERATED_CONTENT) { // Make sure all the content nodes for the generated content inside // this frame know it's going away. // This is duplicated in nsInlineFrame::Destroy // See also nsCSSFrameConstructor::CreateGeneratedContentFrame which // created this frame. // XXXbz would this be better done via a global structure in // nsCSSFrameConstructor that could key off of // GeneratedContentFrameRemoved or something? The problem is that // our kids are gone by the time that's called. nsContainerFrame::CleanupGeneratedContentIn(mContent, this); } mAbsoluteContainer.DestroyFrames(this); // Outside bullets are not in our child-list so check for them here // and delete them when present. if (mBullet && HaveOutsideBullet()) { mBullet->Destroy(); mBullet = nsnull; } mFloats.DestroyFrames(); nsPresContext* presContext = PresContext(); nsLineBox::DeleteLineList(presContext, mLines); // destroy overflow lines now nsLineList* overflowLines = RemoveOverflowLines(); if (overflowLines) { nsLineBox::DeleteLineList(presContext, *overflowLines); } { nsAutoOOFFrameList oofs(this); oofs.mList.DestroyFrames(); // oofs is now empty and will remove the frame list property } nsBlockFrameSuper::Destroy(); } NS_IMETHODIMP nsBlockFrame::QueryInterface(const nsIID& aIID, void** aInstancePtr) { NS_PRECONDITION(aInstancePtr, "null out param"); if (aIID.Equals(kBlockFrameCID)) { *aInstancePtr = NS_STATIC_CAST(void*, NS_STATIC_CAST(nsBlockFrame*, this)); return NS_OK; } if (aIID.Equals(NS_GET_IID(nsILineIterator)) || aIID.Equals(NS_GET_IID(nsILineIteratorNavigator))) { nsLineIterator* it = new nsLineIterator; if (!it) { *aInstancePtr = nsnull; return NS_ERROR_OUT_OF_MEMORY; } NS_ADDREF(it); // reference passed to caller const nsStyleVisibility* visibility = GetStyleVisibility(); nsresult rv = it->Init(mLines, visibility->mDirection == NS_STYLE_DIRECTION_RTL); if (NS_FAILED(rv)) { NS_RELEASE(it); return rv; } *aInstancePtr = NS_STATIC_CAST(void*, NS_STATIC_CAST(nsILineIteratorNavigator*, it)); return NS_OK; } return nsBlockFrameSuper::QueryInterface(aIID, aInstancePtr); } nsSplittableType nsBlockFrame::GetSplittableType() const { return NS_FRAME_SPLITTABLE_NON_RECTANGULAR; } #ifdef DEBUG NS_METHOD nsBlockFrame::List(FILE* out, PRInt32 aIndent) const { IndentBy(out, aIndent); ListTag(out); #ifdef DEBUG_waterson fprintf(out, " [parent=%p]", mParent); #endif if (HasView()) { fprintf(out, " [view=%p]", NS_STATIC_CAST(void*, GetView())); } if (nsnull != mNextSibling) { fprintf(out, " next=%p", NS_STATIC_CAST(void*, mNextSibling)); } // Output the flow linkage if (nsnull != GetPrevInFlow()) { fprintf(out, " prev-in-flow=%p", NS_STATIC_CAST(void*, GetPrevInFlow())); } if (nsnull != GetNextInFlow()) { fprintf(out, " next-in-flow=%p", NS_STATIC_CAST(void*, GetNextInFlow())); } // Output the rect and state fprintf(out, " {%d,%d,%d,%d}", mRect.x, mRect.y, mRect.width, mRect.height); if (0 != mState) { fprintf(out, " [state=%08x]", mState); } nsBlockFrame* f = NS_CONST_CAST(nsBlockFrame*, this); nsRect* overflowArea = f->GetOverflowAreaProperty(PR_FALSE); if (overflowArea) { fprintf(out, " [overflow=%d,%d,%d,%d]", overflowArea->x, overflowArea->y, overflowArea->width, overflowArea->height); } PRInt32 numInlineLines = 0; PRInt32 numBlockLines = 0; if (! mLines.empty()) { for (const_line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { if (line->IsBlock()) numBlockLines++; else numInlineLines++; } } fprintf(out, " sc=%p(i=%d,b=%d)", NS_STATIC_CAST(void*, mStyleContext), numInlineLines, numBlockLines); nsIAtom* pseudoTag = mStyleContext->GetPseudoType(); if (pseudoTag) { nsAutoString atomString; pseudoTag->ToString(atomString); fprintf(out, " pst=%s", NS_LossyConvertUTF16toASCII(atomString).get()); } fputs("<\n", out); aIndent++; // Output the lines if (! mLines.empty()) { for (const_line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { line->List(out, aIndent); } } nsIAtom* listName = nsnull; PRInt32 listIndex = 0; for (;;) { listName = GetAdditionalChildListName(listIndex++); if (nsnull == listName) { break; } nsIFrame* kid = GetFirstChild(listName); if (kid) { IndentBy(out, aIndent); nsAutoString tmp; if (nsnull != listName) { listName->ToString(tmp); fputs(NS_LossyConvertUTF16toASCII(tmp).get(), out); } fputs("<\n", out); while (kid) { nsIFrameDebug* frameDebug; if (NS_SUCCEEDED(CallQueryInterface(kid, &frameDebug))) { frameDebug->List(out, aIndent + 1); } kid = kid->GetNextSibling(); } IndentBy(out, aIndent); fputs(">\n", out); } } aIndent--; IndentBy(out, aIndent); fputs(">\n", out); return NS_OK; } NS_IMETHODIMP_(nsFrameState) nsBlockFrame::GetDebugStateBits() const { // We don't want to include our cursor flag in the bits the // regression tester looks at return nsBlockFrameSuper::GetDebugStateBits() & ~NS_BLOCK_HAS_LINE_CURSOR; } NS_IMETHODIMP nsBlockFrame::GetFrameName(nsAString& aResult) const { return MakeFrameName(NS_LITERAL_STRING("Block"), aResult); } #endif nsIAtom* nsBlockFrame::GetType() const { return nsGkAtoms::blockFrame; } void nsBlockFrame::InvalidateInternal(const nsRect& aDamageRect, nscoord aX, nscoord aY, nsIFrame* aForChild, PRBool aImmediate) { // Optimize by suppressing invalidation of areas that are clipped out // with CSS 'clip'. const nsStyleDisplay* disp = GetStyleDisplay(); nsRect absPosClipRect; if (GetAbsPosClipRect(disp, &absPosClipRect, GetSize())) { // Restrict the invalidated area to abs-pos clip rect // abs-pos clipping clips everything in the frame nsRect r; if (r.IntersectRect(aDamageRect, absPosClipRect - nsPoint(aX, aY))) { nsBlockFrameSuper::InvalidateInternal(r, aX, aY, this, aImmediate); } return; } nsBlockFrameSuper::InvalidateInternal(aDamageRect, aX, aY, this, aImmediate); } nscoord nsBlockFrame::GetBaseline() const { NS_ASSERTION(!NS_SUBTREE_DIRTY(this), "frame must not be dirty"); nscoord result; if (nsLayoutUtils::GetLastLineBaseline(this, &result)) return result; return nsFrame::GetBaseline(); } ///////////////////////////////////////////////////////////////////////////// // Child frame enumeration nsIFrame* nsBlockFrame::GetFirstChild(nsIAtom* aListName) const { if (mAbsoluteContainer.GetChildListName() == aListName) { nsIFrame* result = nsnull; mAbsoluteContainer.FirstChild(this, aListName, &result); return result; } else if (nsnull == aListName) { return (mLines.empty()) ? nsnull : mLines.front()->mFirstChild; } else if (aListName == nsGkAtoms::overflowList) { nsLineList* overflowLines = GetOverflowLines(); return overflowLines ? overflowLines->front()->mFirstChild : nsnull; } else if (aListName == nsGkAtoms::overflowOutOfFlowList) { return GetOverflowOutOfFlows().FirstChild(); } else if (aListName == nsGkAtoms::floatList) { return mFloats.FirstChild(); } else if (aListName == nsGkAtoms::bulletList) { if (HaveOutsideBullet()) { return mBullet; } } return nsnull; } nsIAtom* nsBlockFrame::GetAdditionalChildListName(PRInt32 aIndex) const { switch (aIndex) { case NS_BLOCK_FRAME_FLOAT_LIST_INDEX: return nsGkAtoms::floatList; case NS_BLOCK_FRAME_BULLET_LIST_INDEX: return nsGkAtoms::bulletList; case NS_BLOCK_FRAME_OVERFLOW_LIST_INDEX: return nsGkAtoms::overflowList; case NS_BLOCK_FRAME_OVERFLOW_OOF_LIST_INDEX: return nsGkAtoms::overflowOutOfFlowList; case NS_BLOCK_FRAME_ABSOLUTE_LIST_INDEX: return mAbsoluteContainer.GetChildListName(); default: return nsnull; } } /* virtual */ PRBool nsBlockFrame::IsContainingBlock() const { return PR_TRUE; } /* virtual */ PRBool nsBlockFrame::IsFloatContainingBlock() const { return PR_TRUE; } static PRBool IsContinuationPlaceholder(nsIFrame* aFrame) { return aFrame->GetPrevInFlow() && nsGkAtoms::placeholderFrame == aFrame->GetType(); } static void ReparentFrame(nsIFrame* aFrame, nsIFrame* aOldParent, nsIFrame* aNewParent) { NS_ASSERTION(aOldParent == aFrame->GetParent(), "Parent not consistent with exepectations"); aFrame->SetParent(aNewParent); // When pushing and pulling frames we need to check for whether any // views need to be reparented nsHTMLContainerFrame::ReparentFrameView(aFrame->PresContext(), aFrame, aOldParent, aNewParent); } ////////////////////////////////////////////////////////////////////// // Frame structure methods ////////////////////////////////////////////////////////////////////// // Reflow methods /* virtual */ void nsBlockFrame::MarkIntrinsicWidthsDirty() { mMinWidth = NS_INTRINSIC_WIDTH_UNKNOWN; mPrefWidth = NS_INTRINSIC_WIDTH_UNKNOWN; nsBlockFrameSuper::MarkIntrinsicWidthsDirty(); } /* virtual */ nscoord nsBlockFrame::GetMinWidth(nsIRenderingContext *aRenderingContext) { DISPLAY_MIN_WIDTH(this, mMinWidth); if (mMinWidth != NS_INTRINSIC_WIDTH_UNKNOWN) return mMinWidth; #ifdef DEBUG if (gNoisyIntrinsic) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": GetMinWidth\n"); } AutoNoisyIndenter indent(gNoisyIntrinsic); #endif #ifdef IBMBIDI ResolveBidi(); #endif // IBMBIDI PRInt32 lineNumber = 0; InlineMinWidthData data; for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line, ++lineNumber) { #ifdef DEBUG if (gNoisyIntrinsic) { IndentBy(stdout, gNoiseIndent); printf("line %d (%s%s)\n", lineNumber, line->IsBlock() ? "block" : "inline", line->IsEmpty() ? ",empty" : ""); } AutoNoisyIndenter lineindent(gNoisyIntrinsic); #endif if (line->IsBlock()) { data.Break(aRenderingContext); data.currentLine = nsLayoutUtils::IntrinsicForContainer(aRenderingContext, line->mFirstChild, nsLayoutUtils::MIN_WIDTH); data.Break(aRenderingContext); } else { nsIFrame *kid = line->mFirstChild; for (PRInt32 i = 0, i_end = line->GetChildCount(); i != i_end; ++i, kid = kid->GetNextSibling()) { kid->AddInlineMinWidth(aRenderingContext, &data); } } #ifdef DEBUG if (gNoisyIntrinsic) { IndentBy(stdout, gNoiseIndent); printf("min: [prevLines=%d currentLine=%d]\n", data.prevLines, data.currentLine); } #endif } data.Break(aRenderingContext); mMinWidth = data.prevLines; return mMinWidth; } /* virtual */ nscoord nsBlockFrame::GetPrefWidth(nsIRenderingContext *aRenderingContext) { DISPLAY_PREF_WIDTH(this, mPrefWidth); if (mPrefWidth != NS_INTRINSIC_WIDTH_UNKNOWN) return mPrefWidth; #ifdef DEBUG if (gNoisyIntrinsic) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": GetPrefWidth\n"); } AutoNoisyIndenter indent(gNoisyIntrinsic); #endif #ifdef IBMBIDI ResolveBidi(); #endif // IBMBIDI PRInt32 lineNumber = 0; InlinePrefWidthData data; for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line, ++lineNumber) { #ifdef DEBUG if (gNoisyIntrinsic) { IndentBy(stdout, gNoiseIndent); printf("line %d (%s%s)\n", lineNumber, line->IsBlock() ? "block" : "inline", line->IsEmpty() ? ",empty" : ""); } AutoNoisyIndenter lineindent(gNoisyIntrinsic); #endif if (line->IsBlock()) { data.Break(aRenderingContext); data.currentLine = nsLayoutUtils::IntrinsicForContainer(aRenderingContext, line->mFirstChild, nsLayoutUtils::PREF_WIDTH); data.Break(aRenderingContext); } else { nsIFrame *kid = line->mFirstChild; for (PRInt32 i = 0, i_end = line->GetChildCount(); i != i_end; ++i, kid = kid->GetNextSibling()) { kid->AddInlinePrefWidth(aRenderingContext, &data); } } #ifdef DEBUG if (gNoisyIntrinsic) { IndentBy(stdout, gNoiseIndent); printf("pref: [prevLines=%d currentLine=%d]\n", data.prevLines, data.currentLine); } #endif } data.Break(aRenderingContext); mPrefWidth = data.prevLines; return mPrefWidth; } static nsSize CalculateContainingBlockSizeForAbsolutes(const nsHTMLReflowState& aReflowState, nsSize aFrameSize) { // The issue here is that for a 'height' of 'auto' the reflow state // code won't know how to calculate the containing block height // because it's calculated bottom up. So we use our own computed // size as the dimensions. We don't really want to do this for the // initial containing block nsIFrame* frame = aReflowState.frame; if (nsLayoutUtils::IsInitialContainingBlock(frame)) { return nsSize(-1, -1); } nsSize cbSize(aFrameSize); // Containing block is relative to the padding edge const nsMargin& border = aReflowState.mStyleBorder->GetBorder(); cbSize.width -= border.left + border.right; cbSize.height -= border.top + border.bottom; if (frame->GetParent()->GetContent() == frame->GetContent()) { // We are a wrapped frame for the content. Use the container's // dimensions, if they have been precomputed. // XXX This is a hack! We really should be waiting until the outermost // frame is fully reflowed and using the resulting dimensions, even // if they're intrinsic. // In fact we should be attaching absolute children to the outermost // frame and not always sticking them in block frames. // First, find the reflow state for the outermost frame for this // content. const nsHTMLReflowState* aLastRS = &aReflowState; const nsHTMLReflowState* lastButOneRS = &aReflowState; while (aLastRS->parentReflowState && aLastRS->parentReflowState->frame->GetContent() == frame->GetContent()) { lastButOneRS = aLastRS; aLastRS = aLastRS->parentReflowState; } if (aLastRS != &aReflowState) { // The wrapper frame should be block-level. If it isn't, how the // heck did it end up wrapping this block frame? NS_ASSERTION(aLastRS->frame->GetStyleDisplay()->IsBlockLevel(), "Wrapping frame should be block-level"); // Scrollbars need to be specifically excluded, if present, because they are outside the // padding-edge. We need better APIs for getting the various boxes from a frame. nsIScrollableFrame* scrollFrame; CallQueryInterface(aLastRS->frame, &scrollFrame); nsMargin scrollbars(0,0,0,0); if (scrollFrame) { nsBoxLayoutState dummyState(aLastRS->frame->PresContext(), aLastRS->rendContext); scrollbars = scrollFrame->GetDesiredScrollbarSizes(&dummyState); // XXX We should account for the horizontal scrollbar too --- but currently // nsGfxScrollFrame assumes nothing depends on the presence (or absence) of // a horizontal scrollbar, so accounting for it would create incremental // reflow bugs. //if (!lastButOneRS->mFlags.mAssumingHScrollbar) { scrollbars.top = scrollbars.bottom = 0; //} if (!lastButOneRS->mFlags.mAssumingVScrollbar) { scrollbars.left = scrollbars.right = 0; } } // We found a reflow state for the outermost wrapping frame, so use // its computed metrics if available if (aLastRS->ComputedWidth() != NS_UNCONSTRAINEDSIZE) { cbSize.width = PR_MAX(0, aLastRS->ComputedWidth() + aLastRS->mComputedPadding.LeftRight() - scrollbars.LeftRight()); } if (aLastRS->mComputedHeight != NS_UNCONSTRAINEDSIZE) { cbSize.height = PR_MAX(0, aLastRS->mComputedHeight + aLastRS->mComputedPadding.TopBottom() - scrollbars.TopBottom()); } } } return cbSize; } NS_IMETHODIMP nsBlockFrame::Reflow(nsPresContext* aPresContext, nsHTMLReflowMetrics& aMetrics, const nsHTMLReflowState& aReflowState, nsReflowStatus& aStatus) { DO_GLOBAL_REFLOW_COUNT("nsBlockFrame"); DISPLAY_REFLOW(aPresContext, this, aReflowState, aMetrics, aStatus); #ifdef DEBUG if (gNoisyReflow) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": begin reflow availSize=%d,%d computedSize=%d,%d\n", aReflowState.availableWidth, aReflowState.availableHeight, aReflowState.ComputedWidth(), aReflowState.mComputedHeight); } AutoNoisyIndenter indent(gNoisy); PRTime start = LL_ZERO; // Initialize these variablies to silence the compiler. PRInt32 ctc = 0; // We only use these if they are set (gLameReflowMetrics). if (gLameReflowMetrics) { start = PR_Now(); ctc = nsLineBox::GetCtorCount(); } #endif nsSize oldSize = GetSize(); // Should we create a space manager? nsAutoSpaceManager autoSpaceManager(NS_CONST_CAST(nsHTMLReflowState &, aReflowState)); // XXXldb If we start storing the space manager in the frame rather // than keeping it around only during reflow then we should create it // only when there are actually floats to manage. Otherwise things // like tables will gain significant bloat. PRBool needSpaceManager = nsBlockFrame::BlockNeedsSpaceManager(this); if (needSpaceManager) autoSpaceManager.CreateSpaceManagerFor(aPresContext, this); // OK, some lines may be reflowed. Blow away any saved line cursor because // we may invalidate the nondecreasing combinedArea.y/yMost invariant, // and we may even delete the line with the line cursor. ClearLineCursor(); if (IsFrameTreeTooDeep(aReflowState, aMetrics)) { #ifdef DEBUG_kipp { extern char* nsPresShell_ReflowStackPointerTop; char marker; char* newsp = (char*) ▮ printf("XXX: frame tree is too deep; approx stack size = %d\n", nsPresShell_ReflowStackPointerTop - newsp); } #endif aStatus = NS_FRAME_COMPLETE; return NS_OK; } PRBool marginRoot = BlockIsMarginRoot(this); nsBlockReflowState state(aReflowState, aPresContext, this, aMetrics, marginRoot, marginRoot, needSpaceManager); #ifdef IBMBIDI ResolveBidi(); #endif // IBMBIDI if (RenumberLists(aPresContext)) { AddStateBits(NS_FRAME_HAS_DIRTY_CHILDREN); } nsresult rv = NS_OK; // ALWAYS drain overflow. We never want to leave the previnflow's // overflow lines hanging around; block reflow depends on the // overflow line lists being cleared out between reflow passes. DrainOverflowLines(state); state.SetupOverflowPlaceholdersProperty(); // If we're not dirty (which means we'll mark everything dirty later) // and our width has changed, mark the lines dirty that we need to // mark dirty for a resize reflow. if (aReflowState.mFlags.mHResize) PrepareResizeReflow(state); mState &= ~NS_FRAME_FIRST_REFLOW; // Now reflow... rv = ReflowDirtyLines(state); NS_ASSERTION(NS_SUCCEEDED(rv), "reflow dirty lines failed"); if (NS_FAILED(rv)) return rv; // If the block is complete, put continuted floats in the closest ancestor // block that uses the same space manager and leave the block complete; this // allows subsequent lines on the page to be impacted by floats. If the // block is incomplete or there is no ancestor using the same space manager, // put continued floats at the beginning of the first overflow line. if (state.mOverflowPlaceholders.NotEmpty()) { NS_ASSERTION(aReflowState.availableHeight != NS_UNCONSTRAINEDSIZE, "Somehow we failed to fit all content, even though we have unlimited space!"); if (NS_FRAME_IS_COMPLETE(state.mReflowStatus)) { // find the nearest block ancestor that uses the same space manager for (const nsHTMLReflowState* ancestorRS = aReflowState.parentReflowState; ancestorRS; ancestorRS = ancestorRS->parentReflowState) { nsIFrame* ancestor = ancestorRS->frame; nsIAtom* fType = ancestor->GetType(); if ((nsGkAtoms::blockFrame == fType || nsGkAtoms::areaFrame == fType) && aReflowState.mSpaceManager == ancestorRS->mSpaceManager) { // Put the continued floats in ancestor since it uses the same space manager nsFrameList* ancestorPlace = ((nsBlockFrame*)ancestor)->GetOverflowPlaceholders(); // The ancestor should have this list, since it's being reflowed. But maybe // it isn't because of reflow roots or something. if (ancestorPlace) { for (nsIFrame* f = state.mOverflowPlaceholders.FirstChild(); f; f = f->GetNextSibling()) { NS_ASSERTION(IsContinuationPlaceholder(f), "Overflow placeholders must be continuation placeholders"); ReparentFrame(f, this, ancestorRS->frame); nsIFrame* oof = nsPlaceholderFrame::GetRealFrameForPlaceholder(f); mFloats.RemoveFrame(oof); ReparentFrame(oof, this, ancestorRS->frame); // Clear the next-sibling in case the frame wasn't in mFloats oof->SetNextSibling(nsnull); // Do not put the float into any child frame list, because // placeholders in the overflow-placeholder block-state list // don't keep their out of flows in a child frame list. } ancestorPlace->AppendFrames(nsnull, state.mOverflowPlaceholders.FirstChild()); state.mOverflowPlaceholders.SetFrames(nsnull); break; } } } } if (!state.mOverflowPlaceholders.IsEmpty()) { state.mOverflowPlaceholders.SortByContentOrder(); PRInt32 numOverflowPlace = state.mOverflowPlaceholders.GetLength(); nsLineBox* newLine = state.NewLineBox(state.mOverflowPlaceholders.FirstChild(), numOverflowPlace, PR_FALSE); if (newLine) { nsLineList* overflowLines = GetOverflowLines(); if (overflowLines) { // Need to put the overflow placeholders' floats into our // overflow-out-of-flows list, since the overflow placeholders are // going onto our overflow line list. Put them last, because that's // where the placeholders are going. nsFrameList floats; nsIFrame* lastFloat = nsnull; for (nsIFrame* f = state.mOverflowPlaceholders.FirstChild(); f; f = f->GetNextSibling()) { NS_ASSERTION(IsContinuationPlaceholder(f), "Overflow placeholders must be continuation placeholders"); nsIFrame* oof = nsPlaceholderFrame::GetRealFrameForPlaceholder(f); // oof is not currently in any child list floats.InsertFrames(nsnull, lastFloat, oof); lastFloat = oof; } // Put the new placeholders *last* in the overflow lines // because they might have previnflows in the overflow lines. nsIFrame* lastChild = overflowLines->back()->LastChild(); lastChild->SetNextSibling(state.mOverflowPlaceholders.FirstChild()); // Create a new line as the last line and put the // placeholders there overflowLines->push_back(newLine); nsAutoOOFFrameList oofs(this); oofs.mList.AppendFrames(nsnull, floats.FirstChild()); } else { mLines.push_back(newLine); nsLineList::iterator nextToLastLine = ----end_lines(); PushLines(state, nextToLastLine); } state.mOverflowPlaceholders.SetFrames(nsnull); } state.mReflowStatus |= NS_FRAME_NOT_COMPLETE | NS_FRAME_REFLOW_NEXTINFLOW; } } if (NS_FRAME_IS_NOT_COMPLETE(state.mReflowStatus)) { if (GetOverflowLines()) { state.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW; } if (NS_STYLE_OVERFLOW_CLIP == aReflowState.mStyleDisplay->mOverflowX) { state.mReflowStatus = NS_FRAME_COMPLETE; } else { #ifdef DEBUG_kipp ListTag(stdout); printf(": block is not complete\n"); #endif } } CheckFloats(state); // Place the "marker" (bullet) frame if it is placed next to a block // child. // // According to the CSS2 spec, section 12.6.1, the "marker" box // participates in the height calculation of the list-item box's // first line box. // // There are exactly two places a bullet can be placed: near the // first or second line. It's only placed on the second line in a // rare case: an empty first line followed by a second line that // contains a block (example:
  • \n

    ... ). This is where // the second case can happen. if (mBullet && HaveOutsideBullet() && (mLines.empty() || mLines.front()->IsBlock() || 0 == mLines.front()->mBounds.height)) { // Reflow the bullet nsHTMLReflowMetrics metrics; ReflowBullet(state, metrics); nscoord baseline; if (!nsLayoutUtils::GetFirstLineBaseline(this, &baseline)) { baseline = 0; } // Doing the alignment using the baseline will also cater for // bullets that are placed next to a child block (bug 92896) // Tall bullets won't look particularly nice here... nsRect bbox = mBullet->GetRect(); bbox.y = baseline - metrics.ascent; mBullet->SetRect(bbox); } // Compute our final size ComputeFinalSize(aReflowState, state, aMetrics); ComputeCombinedArea(aReflowState, aMetrics); // see if verifyReflow is enabled, and if so store off the space manager pointer #ifdef DEBUG PRInt32 verifyReflowFlags = nsIPresShell::GetVerifyReflowFlags(); if (VERIFY_REFLOW_INCLUDE_SPACE_MANAGER & verifyReflowFlags) { // this is a leak of the space manager, but it's only in debug if verify reflow is enabled, so not a big deal nsIPresShell *shell = aPresContext->GetPresShell(); if (shell) { nsHTMLReflowState& reflowState = (nsHTMLReflowState&)aReflowState; rv = SetProperty(nsGkAtoms::spaceManagerProperty, reflowState.mSpaceManager, nsnull /* should be nsSpaceManagerDestroyer*/); autoSpaceManager.DebugOrphanSpaceManager(); } } #endif // Let the absolutely positioned container reflow any absolutely positioned // child frames that need to be reflowed, e.g., elements with a percentage // based width/height // We want to do this under either of two conditions: // 1. If we didn't do the incremental reflow above. // 2. If our size changed. // Even though it's the padding edge that's the containing block, we // can use our rect (the border edge) since if the border style // changed, the reflow would have been targeted at us so we'd satisfy // condition 1. if (mAbsoluteContainer.HasAbsoluteFrames()) { nsRect childBounds; nsSize containingBlockSize = CalculateContainingBlockSizeForAbsolutes(aReflowState, nsSize(aMetrics.width, aMetrics.height)); // Mark frames that depend on changes we just made to this frame as dirty: // Now we can assume that the padding edge hasn't moved. // We need to reflow the absolutes if one of them depends on // its placeholder position, or the containing block size in a // direction in which the containing block size might have // changed. PRBool cbWidthChanged = aMetrics.width != oldSize.width; PRBool isRoot = !GetContent()->GetParent(); // If isRoot and we have auto height, then we are the initial // containing block and the containing block height is the // viewport height, which can't change during incremental // reflow. PRBool cbHeightChanged = !(isRoot && NS_UNCONSTRAINEDSIZE == aReflowState.mComputedHeight) && aMetrics.height != oldSize.height; rv = mAbsoluteContainer.Reflow(this, aPresContext, aReflowState, containingBlockSize.width, containingBlockSize.height, cbWidthChanged, cbHeightChanged, &childBounds); // Factor the absolutely positioned child bounds into the overflow area aMetrics.mOverflowArea.UnionRect(aMetrics.mOverflowArea, childBounds); } // Determine if we need to repaint our border, background or outline CheckInvalidateSizeChange(aPresContext, aMetrics, aReflowState); FinishAndStoreOverflow(&aMetrics); // Clear the space manager pointer in the block reflow state so we // don't waste time translating the coordinate system back on a dead // space manager. if (needSpaceManager) state.mSpaceManager = nsnull; aStatus = state.mReflowStatus; #ifdef DEBUG if (gNoisyReflow) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": status=%x (%scomplete) metrics=%d,%d carriedMargin=%d", aStatus, NS_FRAME_IS_COMPLETE(aStatus) ? "" : "not ", aMetrics.width, aMetrics.height, aMetrics.mCarriedOutBottomMargin.get()); if (mState & NS_FRAME_OUTSIDE_CHILDREN) { printf(" combinedArea={%d,%d,%d,%d}", aMetrics.mOverflowArea.x, aMetrics.mOverflowArea.y, aMetrics.mOverflowArea.width, aMetrics.mOverflowArea.height); } printf("\n"); } if (gLameReflowMetrics) { PRTime end = PR_Now(); PRInt32 ectc = nsLineBox::GetCtorCount(); PRInt32 numLines = mLines.size(); if (!numLines) numLines = 1; PRTime delta, perLineDelta, lines; LL_I2L(lines, numLines); LL_SUB(delta, end, start); LL_DIV(perLineDelta, delta, lines); ListTag(stdout); char buf[400]; PR_snprintf(buf, sizeof(buf), ": %lld elapsed (%lld per line) (%d lines; %d new lines)", delta, perLineDelta, numLines, ectc - ctc); printf("%s\n", buf); } #endif NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aMetrics); return rv; } PRBool nsBlockFrame::CheckForCollapsedBottomMarginFromClearanceLine() { line_iterator begin = begin_lines(); line_iterator line = end_lines(); while (PR_TRUE) { if (begin == line) { return PR_FALSE; } --line; if (line->mBounds.height != 0 || !line->CachedIsEmpty()) { return PR_FALSE; } if (line->HasClearance()) { return PR_TRUE; } } // not reached } void nsBlockFrame::ComputeFinalSize(const nsHTMLReflowState& aReflowState, nsBlockReflowState& aState, nsHTMLReflowMetrics& aMetrics) { const nsMargin& borderPadding = aState.BorderPadding(); #ifdef NOISY_FINAL_SIZE ListTag(stdout); printf(": mY=%d mIsBottomMarginRoot=%s mPrevBottomMargin=%d bp=%d,%d\n", aState.mY, aState.GetFlag(BRS_ISBOTTOMMARGINROOT) ? "yes" : "no", aState.mPrevBottomMargin, borderPadding.top, borderPadding.bottom); #endif // Compute final width aMetrics.width = borderPadding.left + aReflowState.ComputedWidth() + borderPadding.right; // Return bottom margin information // rbs says he hit this assertion occasionally (see bug 86947), so // just set the margin to zero and we'll figure out why later //NS_ASSERTION(aMetrics.mCarriedOutBottomMargin.IsZero(), // "someone else set the margin"); nscoord nonCarriedOutVerticalMargin = 0; if (!aState.GetFlag(BRS_ISBOTTOMMARGINROOT)) { // Apply rule from CSS 2.1 section 8.3.1. If we have some empty // line with clearance and a non-zero top margin and all // subsequent lines are empty, then we do not allow our children's // carried out bottom margin to be carried out of us and collapse // with our own bottom margin. if (CheckForCollapsedBottomMarginFromClearanceLine()) { // Convert the children's carried out margin to something that // we will include in our height nonCarriedOutVerticalMargin = aState.mPrevBottomMargin.get(); aState.mPrevBottomMargin.Zero(); } aMetrics.mCarriedOutBottomMargin = aState.mPrevBottomMargin; } else { aMetrics.mCarriedOutBottomMargin.Zero(); } // Compute final height if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedHeight) { // Figure out how much of the computed height should be // applied to this frame. nscoord computedHeightLeftOver = aReflowState.mComputedHeight; if (GetPrevInFlow()) { // Reduce the height by the computed height of prev-in-flows. for (nsIFrame* prev = GetPrevInFlow(); prev; prev = prev->GetPrevInFlow()) { computedHeightLeftOver -= prev->GetRect().height; } // We just subtracted our top-border padding, since it was included in the // first frame's height. Add it back to get the content height. computedHeightLeftOver += aReflowState.mComputedBorderPadding.top; // We may have stretched the frame beyond its computed height. Oh well. computedHeightLeftOver = PR_MAX(0, computedHeightLeftOver); } if (NS_FRAME_IS_COMPLETE(aState.mReflowStatus)) { aMetrics.height = borderPadding.top + computedHeightLeftOver + borderPadding.bottom; if (computedHeightLeftOver > 0 && aMetrics.height > aReflowState.availableHeight) { // We don't fit and we consumed some of the computed height, // so we should consume all the available height and then // break. If our bottom border/padding straddles the break // point, then this will increase our height and push the // border/padding to the next page/column. aMetrics.height = aReflowState.availableHeight; aState.mReflowStatus |= NS_FRAME_NOT_COMPLETE; } } else { // Use the current height; continuations will take up the rest. // Do extend the height to at least consume the available // height, otherwise our left/right borders (for example) won't // extend all the way to the break. aMetrics.height = PR_MAX(aReflowState.availableHeight, aState.mY + nonCarriedOutVerticalMargin); // ... but don't take up more height than is available aMetrics.height = PR_MIN(aMetrics.height, borderPadding.top + computedHeightLeftOver); // XXX It's pretty wrong that our bottom border still gets drawn on // on its own on the last-in-flow, even if we ran out of height // here. We need GetSkipSides to check whether we ran out of content // height in the current frame, not whether it's last-in-flow. } // Don't carry out a bottom margin when our height is fixed. aMetrics.mCarriedOutBottomMargin.Zero(); } else { nscoord autoHeight = aState.mY + nonCarriedOutVerticalMargin; // Shrink wrap our height around our contents. if (aState.GetFlag(BRS_ISBOTTOMMARGINROOT)) { // When we are a bottom-margin root make sure that our last // childs bottom margin is fully applied. // Apply the margin only if there's space for it. if (autoHeight < aState.mReflowState.availableHeight) { // Truncate bottom margin if it doesn't fit to our available height. autoHeight = PR_MIN(autoHeight + aState.mPrevBottomMargin.get(), aState.mReflowState.availableHeight); } } if (aState.GetFlag(BRS_SPACE_MGR)) { // Include the space manager's state to properly account for the // bottom margin of any floated elements; e.g., inside a table cell. nscoord ymost; if (aReflowState.mSpaceManager->YMost(ymost) && autoHeight < ymost) autoHeight = ymost; } // Apply min/max values autoHeight -= borderPadding.top; nscoord oldAutoHeight = autoHeight; aReflowState.ApplyMinMaxConstraints(nsnull, &autoHeight); if (autoHeight != oldAutoHeight) { // Our min-height or max-height made our height change. Don't carry out // our kids' bottom margins. aMetrics.mCarriedOutBottomMargin.Zero(); } autoHeight += borderPadding.top + borderPadding.bottom; aMetrics.height = autoHeight; } #ifdef DEBUG_blocks if (CRAZY_WIDTH(aMetrics.width) || CRAZY_HEIGHT(aMetrics.height)) { ListTag(stdout); printf(": WARNING: desired:%d,%d\n", aMetrics.width, aMetrics.height); } #endif } void nsBlockFrame::ComputeCombinedArea(const nsHTMLReflowState& aReflowState, nsHTMLReflowMetrics& aMetrics) { // Compute the combined area of our children // XXX_perf: This can be done incrementally. It is currently one of // the things that makes incremental reflow O(N^2). nsRect area(0, 0, aMetrics.width, aMetrics.height); if (NS_STYLE_OVERFLOW_CLIP != aReflowState.mStyleDisplay->mOverflowX) { for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { area.UnionRect(area, line->GetCombinedArea()); } // Factor the bullet in; normally the bullet will be factored into // the line-box's combined area. However, if the line is a block // line then it won't; if there are no lines, it won't. So just // factor it in anyway (it can't hurt if it was already done). // XXXldb Can we just fix GetCombinedArea instead? if (mBullet) { area.UnionRect(area, mBullet->GetRect()); } } #ifdef NOISY_COMBINED_AREA ListTag(stdout); printf(": ca=%d,%d,%d,%d\n", area.x, area.y, area.width, area.height); #endif aMetrics.mOverflowArea = area; } nsresult nsBlockFrame::MarkLineDirty(line_iterator aLine) { // Mark aLine dirty aLine->MarkDirty(); #ifdef DEBUG if (gNoisyReflow) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": mark line %p dirty\n", NS_STATIC_CAST(void*, aLine.get())); } #endif // Mark previous line dirty if it's an inline line so that it can // maybe pullup something from the line just affected. // XXX We don't need to do this if aPrevLine ends in a break-after... if (aLine != mLines.front() && aLine->IsInline() && aLine.prev()->IsInline()) { aLine.prev()->MarkDirty(); #ifdef DEBUG if (gNoisyReflow) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": mark prev-line %p dirty\n", NS_STATIC_CAST(void*, aLine.prev().get())); } #endif } return NS_OK; } nsresult nsBlockFrame::PrepareResizeReflow(nsBlockReflowState& aState) { // we need to calculate if any part of then block itself // is impacted by a float (bug 19579) aState.GetAvailableSpace(); const nsStyleText* styleText = GetStyleText(); // See if we can try and avoid marking all the lines as dirty PRBool tryAndSkipLines = // There must be no floats. !aState.IsImpactedByFloat() && // The text must be left-aligned. (NS_STYLE_TEXT_ALIGN_LEFT == styleText->mTextAlign || (NS_STYLE_TEXT_ALIGN_DEFAULT == styleText->mTextAlign && NS_STYLE_DIRECTION_LTR == aState.mReflowState.mStyleVisibility->mDirection)) && // The left content-edge must be a constant distance from the left // border-edge. GetStylePadding()->mPadding.GetLeftUnit() != eStyleUnit_Percent; #ifdef DEBUG if (gDisableResizeOpt) { tryAndSkipLines = PR_FALSE; } if (gNoisyReflow) { if (!tryAndSkipLines) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": marking all lines dirty: availWidth=%d textAlign=%d\n", aState.mReflowState.availableWidth, styleText->mTextAlign); } } #endif if (tryAndSkipLines) { nscoord newAvailWidth = aState.mReflowState.mComputedBorderPadding.left + aState.mReflowState.ComputedWidth(); NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aState.mReflowState.mComputedBorderPadding.left && NS_UNCONSTRAINEDSIZE != aState.mReflowState.ComputedWidth(), "math on NS_UNCONSTRAINEDSIZE"); #ifdef DEBUG if (gNoisyReflow) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": trying to avoid marking all lines dirty\n"); } #endif for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { // We let child blocks make their own decisions the same // way we are here. if (line->IsBlock() || line->HasFloats() || (line != mLines.back() && !line->HasBreakAfter()) || line->ResizeReflowOptimizationDisabled() || line->IsImpactedByFloat() || (line->mBounds.XMost() > newAvailWidth)) { line->MarkDirty(); } #ifdef REALLY_NOISY_REFLOW if (!line->IsBlock()) { printf("PrepareResizeReflow thinks line %p is %simpacted by floats\n", line.get(), line->IsImpactedByFloat() ? "" : "not "); } #endif #ifdef DEBUG if (gNoisyReflow && !line->IsDirty()) { IndentBy(stdout, gNoiseIndent + 1); printf("skipped: line=%p next=%p %s %s%s%s breakTypeBefore/After=%d/%d xmost=%d\n", NS_STATIC_CAST(void*, line.get()), NS_STATIC_CAST(void*, (line.next() != end_lines() ? line.next().get() : nsnull)), line->IsBlock() ? "block" : "inline", line->HasBreakAfter() ? "has-break-after " : "", line->HasFloats() ? "has-floats " : "", line->IsImpactedByFloat() ? "impacted " : "", line->GetBreakTypeBefore(), line->GetBreakTypeAfter(), line->mBounds.XMost()); } #endif } } else { // Mark everything dirty for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { line->MarkDirty(); } } return NS_OK; } //---------------------------------------- nsBlockFrame::line_iterator nsBlockFrame::FindLineFor(nsIFrame* aFrame) { NS_PRECONDITION(aFrame, "why pass a null frame?"); line_iterator line = begin_lines(), line_end = end_lines(); for ( ; line != line_end; ++line) { // If the target frame is in-flow, and this line contains the it, // then we've found our line. if (line->Contains(aFrame)) return line; // If the target frame is floated, and this line contains the // float's placeholder, then we've found our line. if (line->HasFloats()) { for (nsFloatCache *fc = line->GetFirstFloat(); fc != nsnull; fc = fc->Next()) { if (aFrame == fc->mPlaceholder->GetOutOfFlowFrame()) return line; } } } return line_end; } /** * Propagate reflow "damage" from from earlier lines to the current * line. The reflow damage comes from the following sources: * 1. The regions of float damage remembered during reflow. * 2. The combination of nonzero |aDeltaY| and any impact by a float, * either the previous reflow or now. * * When entering this function, |aLine| is still at its old position and * |aDeltaY| indicates how much it will later be slid (assuming it * doesn't get marked dirty and reflowed entirely). */ void nsBlockFrame::PropagateFloatDamage(nsBlockReflowState& aState, nsLineBox* aLine, nscoord aDeltaY) { NS_PRECONDITION(!aLine->IsDirty(), "should never be called on dirty lines"); // Check the damage region recorded in the float damage. nsSpaceManager *spaceManager = aState.mReflowState.mSpaceManager; if (spaceManager->HasFloatDamage()) { nscoord lineYA = aLine->mBounds.y + aDeltaY; nscoord lineYB = lineYA + aLine->mBounds.height; if (spaceManager->IntersectsDamage(lineYA, lineYB)) { aLine->MarkDirty(); return; } } if (aDeltaY) { // Cases we need to find: // // 1. the line was impacted by a float and now isn't // 2. the line wasn't impacted by a float and now is // 3. the line is impacted by a float both before and after and // the float has changed position relative to the line (or it's // a different float). (XXXPerf we don't currently // check whether the float changed size. We currently just // mark blocks dirty and ignore any possibility of damage to // inlines by it being a different float with a different // size.) // // XXXPerf: An optimization: if the line was and is completely // impacted by a float and the float hasn't changed size, // then we don't need to mark the line dirty. aState.GetAvailableSpace(aLine->mBounds.y + aDeltaY, PR_FALSE); PRBool wasImpactedByFloat = aLine->IsImpactedByFloat(); PRBool isImpactedByFloat = aState.IsImpactedByFloat(); #ifdef REALLY_NOISY_REFLOW printf("nsBlockFrame::PropagateFloatDamage %p was = %d, is=%d\n", this, wasImpactedByFloat, isImpactedByFloat); #endif // Mark the line dirty if: // 1. It used to be impacted by a float and now isn't, or vice // versa. // 2. It is impacted by a float and it is a block, which means // that more or less of the line could be impacted than was in // the past. (XXXPerf This could be optimized further, since // we're marking the whole line dirty.) if ((wasImpactedByFloat != isImpactedByFloat) || (isImpactedByFloat && aLine->IsBlock())) { aLine->MarkDirty(); } } } static void PlaceFrameView(nsIFrame* aFrame); static PRBool LineHasClear(nsLineBox* aLine) { return aLine->GetBreakTypeBefore() || aLine->HasFloatBreakAfter() || (aLine->IsBlock() && (aLine->mFirstChild->GetStateBits() & NS_BLOCK_HAS_CLEAR_CHILDREN)); } /** * Reparent a whole list of floats from aOldParent to this block. The * floats might be taken from aOldParent's overflow list. They will be * removed from the list. They end up appended to our mFloats list. */ void nsBlockFrame::ReparentFloats(nsIFrame* aFirstFrame, nsBlockFrame* aOldParent, PRBool aFromOverflow, PRBool aReparentSiblings) { nsFrameList list; nsIFrame* tail = nsnull; aOldParent->CollectFloats(aFirstFrame, list, &tail, aFromOverflow, aReparentSiblings); if (list.NotEmpty()) { for (nsIFrame* f = list.FirstChild(); f; f = f->GetNextSibling()) { ReparentFrame(f, aOldParent, this); } mFloats.AppendFrames(nsnull, list.FirstChild()); } } static void DumpLine(const nsBlockReflowState& aState, nsLineBox* aLine, nscoord aDeltaY, PRInt32 aDeltaIndent) { #ifdef DEBUG if (nsBlockFrame::gNoisyReflow) { nsRect lca(aLine->GetCombinedArea()); nsBlockFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent + aDeltaIndent); printf("line=%p mY=%d dirty=%s oldBounds={%d,%d,%d,%d} oldCombinedArea={%d,%d,%d,%d} deltaY=%d mPrevBottomMargin=%d childCount=%d\n", NS_STATIC_CAST(void*, aLine), aState.mY, aLine->IsDirty() ? "yes" : "no", aLine->mBounds.x, aLine->mBounds.y, aLine->mBounds.width, aLine->mBounds.height, lca.x, lca.y, lca.width, lca.height, aDeltaY, aState.mPrevBottomMargin.get(), aLine->GetChildCount()); } #endif } /** * Reflow the dirty lines */ nsresult nsBlockFrame::ReflowDirtyLines(nsBlockReflowState& aState) { nsresult rv = NS_OK; PRBool keepGoing = PR_TRUE; PRBool repositionViews = PR_FALSE; // should we really need this? PRBool foundAnyClears = PR_FALSE; #ifdef DEBUG if (gNoisyReflow) { IndentBy(stdout, gNoiseIndent); ListTag(stdout); printf(": reflowing dirty lines"); printf(" computedWidth=%d\n", aState.mReflowState.ComputedWidth()); } AutoNoisyIndenter indent(gNoisyReflow); #endif PRBool selfDirty = (GetStateBits() & NS_FRAME_IS_DIRTY) || (aState.mReflowState.mFlags.mVResize && (GetStateBits() & NS_FRAME_CONTAINS_RELATIVE_HEIGHT)); // the amount by which we will slide the current line if it is not // dirty nscoord deltaY = 0; // whether we did NOT reflow the previous line and thus we need to // recompute the carried out margin before the line if we want to // reflow it or if its previous margin is dirty PRBool needToRecoverState = PR_FALSE; PRBool reflowedFloat = PR_FALSE; PRBool lastLineMovedUp = PR_FALSE; // We save up information about BR-clearance here PRUint8 inlineFloatBreakType = NS_STYLE_CLEAR_NONE; line_iterator line = begin_lines(), line_end = end_lines(); // Reflow the lines that are already ours for ( ; line != line_end; ++line, aState.AdvanceToNextLine()) { DumpLine(aState, line, deltaY, 0); #ifdef DEBUG AutoNoisyIndenter indent2(gNoisyReflow); #endif if (selfDirty) line->MarkDirty(); // This really sucks, but we have to look inside any blocks that have clear // elements inside them. // XXX what can we do smarter here? if (!line->IsDirty() && line->IsBlock() && (line->mFirstChild->GetStateBits() & NS_BLOCK_HAS_CLEAR_CHILDREN)) { line->MarkDirty(); } // We have to reflow the line if it's a block whose clearance // might have changed, so detect that. if (!line->IsDirty() && line->GetBreakTypeBefore() != NS_STYLE_CLEAR_NONE) { nscoord curY = aState.mY; // See where we would be after applying any clearance due to // BRs. if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) { curY = aState.ClearFloats(curY, inlineFloatBreakType); } nscoord newY = aState.ClearFloats(curY, line->GetBreakTypeBefore()); if (line->HasClearance()) { // Reflow the line if it might not have clearance anymore. if (newY == curY // aState.mY is the clearance point which should be the // top border-edge of the block frame. If sliding the // block by deltaY isn't going to put it in the predicted // position, then we'd better reflow the line. || newY != line->mBounds.y + deltaY) { line->MarkDirty(); } } else { // Reflow the line if the line might have clearance now. if (curY != newY) { line->MarkDirty(); } } } // We might have to reflow a line that is after a clearing BR. if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) { aState.mY = aState.ClearFloats(aState.mY, inlineFloatBreakType); if (aState.mY != line->mBounds.y + deltaY) { // SlideLine is not going to put the line where the clearance // put it. Reflow the line to be sure. line->MarkDirty(); } inlineFloatBreakType = NS_STYLE_CLEAR_NONE; } PRBool previousMarginWasDirty = line->IsPreviousMarginDirty(); if (previousMarginWasDirty) { // If the previous margin is dirty, reflow the current line line->MarkDirty(); line->ClearPreviousMarginDirty(); } else if (line->mBounds.YMost() + deltaY > aState.mBottomEdge) { // Lines that aren't dirty but get slid past our height constraint must // be reflowed. line->MarkDirty(); } if (!line->IsDirty()) { // See if there's any reflow damage that requires that we mark the // line dirty. PropagateFloatDamage(aState, line, deltaY); } if (needToRecoverState && line->IsDirty()) { // We need to reconstruct the bottom margin only if we didn't // reflow the previous line and we do need to reflow (or repair // the top position of) the next line. aState.ReconstructMarginAbove(line); } if (needToRecoverState) { needToRecoverState = PR_FALSE; // Update aState.mPrevChild as if we had reflowed all of the frames in // this line. This is expensive in some cases, since it requires // walking |GetNextSibling|. if (line->IsDirty()) aState.mPrevChild = line.prev()->LastChild(); } // Now repair the line and update |aState.mY| by calling // |ReflowLine| or |SlideLine|. if (line->IsDirty()) { lastLineMovedUp = PR_TRUE; PRBool maybeReflowingForFirstTime = line->mBounds.x == 0 && line->mBounds.y == 0 && line->mBounds.width == 0 && line->mBounds.height == 0; // Compute the dirty lines "before" YMost, after factoring in // the running deltaY value - the running value is implicit in // aState.mY. nscoord oldY = line->mBounds.y; nscoord oldYMost = line->mBounds.YMost(); // Reflow the dirty line. If it's an incremental reflow, then force // it to invalidate the dirty area if necessary rv = ReflowLine(aState, line, &keepGoing); NS_ENSURE_SUCCESS(rv, rv); if (line->HasFloats()) { reflowedFloat = PR_TRUE; } if (!keepGoing) { DumpLine(aState, line, deltaY, -1); if (0 == line->GetChildCount()) { DeleteLine(aState, line, line_end); } break; } // Test to see whether the margin that should be carried out // to the next line (NL) might have changed. In ReflowBlockFrame // we call nextLine->MarkPreviousMarginDirty if the block's // actual carried-out bottom margin changed. So here we only // need to worry about the following effects: // 1) the line was just created, and it might now be blocking // a carried-out bottom margin from previous lines that // used to reach NL from reaching NL // 2) the line used to be empty, and is now not empty, // thus blocking a carried-out bottom margin from previous lines // that used to reach NL from reaching NL // 3) the line wasn't empty, but now is, so a carried-out // bottom margin from previous lines that didn't used to reach NL // now does // 4) the line might have changed in a way that affects NL's // ShouldApplyTopMargin decision. The three things that matter // are the line's emptiness, its adjacency to the top of the block, // and whether it has clearance (the latter only matters if the block // was and is adjacent to the top and empty). // // If the line is empty now, we can't reliably tell if the line was empty // before, so we just assume it was and do nextLine->MarkPreviousMarginDirty. // This means the checks in 4) are redundant; if the line is empty now // we don't need to check 4), but if the line is not empty now and we're sure // it wasn't empty before, any adjacency and clearance changes are irrelevant // to the result of nextLine->ShouldApplyTopMargin. if (line.next() != end_lines()) { PRBool maybeWasEmpty = oldY == oldYMost; PRBool isEmpty = line->mBounds.height == 0 && line->CachedIsEmpty(); if (maybeReflowingForFirstTime /*1*/ || (isEmpty || maybeWasEmpty) /*2/3/4*/) { line.next()->MarkPreviousMarginDirty(); // since it's marked dirty, nobody will care about |deltaY| } } // If the line was just reflowed for the first time, then its // old mBounds cannot be trusted so this deltaY computation is // bogus. But that's OK because we just did // MarkPreviousMarginDirty on the next line which will force it // to be reflowed, so this computation of deltaY will not be // used. deltaY = line->mBounds.YMost() - oldYMost; } else { lastLineMovedUp = deltaY < 0; if (deltaY != 0) SlideLine(aState, line, deltaY); else repositionViews = PR_TRUE; // XXX EVIL O(N^2) EVIL aState.RecoverStateFrom(line, deltaY); // Keep mY up to date in case we're propagating reflow damage // and also because our final height may depend on it. If the // line is inlines, then only update mY if the line is not // empty, because that's what PlaceLine does. (Empty blocks may // want to update mY, e.g. if they have clearance.) if (line->IsBlock() || !line->CachedIsEmpty()) { aState.mY = line->mBounds.YMost(); } needToRecoverState = PR_TRUE; } // Record if we need to clear floats before reflowing the next // line. Note that inlineFloatBreakType will be handled and // cleared before the next line is processed, so there is no // need to combine break types here. if (line->HasFloatBreakAfter()) { inlineFloatBreakType = line->GetBreakTypeAfter(); } if (LineHasClear(line.get())) { foundAnyClears = PR_TRUE; } DumpLine(aState, line, deltaY, -1); } // Handle BR-clearance from the last line of the block if (inlineFloatBreakType != NS_STYLE_CLEAR_NONE) { aState.mY = aState.ClearFloats(aState.mY, inlineFloatBreakType); } if (needToRecoverState) { // Is this expensive? aState.ReconstructMarginAbove(line); // Update aState.mPrevChild as if we had reflowed all of the frames in // the last line. This is expensive in some cases, since it requires // walking |GetNextSibling|. aState.mPrevChild = line.prev()->LastChild(); } // Should we really have to do this? if (repositionViews) ::PlaceFrameView(this); // We can skip trying to pull up the next line if there is no next // in flow or we were told not to or we know it will be futile, i.e., // -- the next in flow is not changing // -- and we cannot have added more space for its first line to be // pulled up into, // -- it's an incremental reflow of a descendant // -- and we didn't reflow any floats (so the available space // didn't change) // XXXldb We should also check that the first line of the next-in-flow // isn't dirty. if (!aState.mNextInFlow || (aState.mReflowState.mFlags.mNextInFlowUntouched && !lastLineMovedUp && !(GetStateBits() & NS_FRAME_IS_DIRTY) && !reflowedFloat)) { if (aState.mNextInFlow) { aState.mReflowStatus |= NS_FRAME_NOT_COMPLETE; } } else { // Pull data from a next-in-flow if there's still room for more // content here. while (keepGoing && (nsnull != aState.mNextInFlow)) { // Grab first line from our next-in-flow nsBlockFrame* nextInFlow = aState.mNextInFlow; line_iterator nifLine = nextInFlow->begin_lines(); nsLineBox *toMove; PRBool collectOverflowFloats; if (nifLine != nextInFlow->end_lines()) { if (HandleOverflowPlaceholdersOnPulledLine(aState, nifLine)) { // go around again in case the line was deleted continue; } toMove = nifLine; nextInFlow->mLines.erase(nifLine); collectOverflowFloats = PR_FALSE; } else { // Grab an overflow line if there are any nsLineList* overflowLines = nextInFlow->GetOverflowLines(); if (overflowLines && HandleOverflowPlaceholdersOnPulledLine(aState, overflowLines->front())) { // go around again in case the line was deleted continue; } if (!overflowLines) { aState.mNextInFlow = NS_STATIC_CAST(nsBlockFrame*, nextInFlow->GetNextInFlow()); continue; } nifLine = overflowLines->begin(); NS_ASSERTION(nifLine != overflowLines->end(), "Stored overflow line list should not be empty"); toMove = nifLine; nextInFlow->RemoveOverflowLines(); nifLine = overflowLines->erase(nifLine); if (nifLine != overflowLines->end()) { // We need to this remove-and-put-back dance because we want // to avoid making the overflow line list empty while it's // stored in the property (because the property has the // invariant that the list is never empty). nextInFlow->SetOverflowLines(overflowLines); } collectOverflowFloats = PR_TRUE; } if (0 == toMove->GetChildCount()) { // The line is empty. Try the next one. NS_ASSERTION(nsnull == toMove->mFirstChild, "bad empty line"); aState.FreeLineBox(toMove); continue; } // XXX move to a subroutine: run-in, overflow, pullframe and this do this // Make the children in the line ours. nsIFrame* frame = toMove->mFirstChild; nsIFrame* lastFrame = nsnull; PRInt32 n = toMove->GetChildCount(); while (--n >= 0) { ReparentFrame(frame, nextInFlow, this); lastFrame = frame; frame = frame->GetNextSibling(); } lastFrame->SetNextSibling(nsnull); // Reparent floats whose placeholders are in the line. ReparentFloats(toMove->mFirstChild, nextInFlow, collectOverflowFloats, PR_TRUE); // Add line to our line list if (aState.mPrevChild) { aState.mPrevChild->SetNextSibling(toMove->mFirstChild); } line = mLines.before_insert(end_lines(), toMove); DumpLine(aState, toMove, deltaY, 0); #ifdef DEBUG AutoNoisyIndenter indent2(gNoisyReflow); #endif // Now reflow it and any lines that it makes during it's reflow // (we have to loop here because reflowing the line may case a new // line to be created; see SplitLine's callers for examples of // when this happens). while (line != end_lines()) { rv = ReflowLine(aState, line, &keepGoing); NS_ENSURE_SUCCESS(rv, rv); DumpLine(aState, line, deltaY, -1); if (!keepGoing) { if (0 == line->GetChildCount()) { DeleteLine(aState, line, line_end); } break; } if (LineHasClear(line.get())) { foundAnyClears = PR_TRUE; } // If this is an inline frame then its time to stop ++line; aState.AdvanceToNextLine(); } } if (NS_FRAME_IS_NOT_COMPLETE(aState.mReflowStatus)) { aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW; } } // Handle an odd-ball case: a list-item with no lines if (mBullet && HaveOutsideBullet() && mLines.empty()) { nsHTMLReflowMetrics metrics; ReflowBullet(aState, metrics); // There are no lines so we have to fake up some y motion so that // we end up with *some* height. aState.mY += metrics.height; } if (foundAnyClears) { AddStateBits(NS_BLOCK_HAS_CLEAR_CHILDREN); } else { RemoveStateBits(NS_BLOCK_HAS_CLEAR_CHILDREN); } #ifdef DEBUG if (gNoisyReflow) { IndentBy(stdout, gNoiseIndent - 1); ListTag(stdout); printf(": done reflowing dirty lines (status=%x)\n", aState.mReflowStatus); } #endif return rv; } void nsBlockFrame::DeleteLine(nsBlockReflowState& aState, nsLineList::iterator aLine, nsLineList::iterator aLineEnd) { NS_PRECONDITION(0 == aLine->GetChildCount(), "can't delete !empty line"); if (0 == aLine->GetChildCount()) { NS_ASSERTION(aState.mCurrentLine == aLine, "using function more generally than designed, " "but perhaps OK now"); nsLineBox *line = aLine; aLine = mLines.erase(aLine); aState.FreeLineBox(line); // Mark the previous margin of the next line dirty since we need to // recompute its top position. if (aLine != aLineEnd) aLine->MarkPreviousMarginDirty(); } } /** * Takes two rectangles whose origins must be the same, and computes * the difference between their union and their intersection as two * rectangles. (This difference is a superset of the difference * between the two rectangles.) */ static void GetRectDifferenceStrips(const nsRect& aR1, const nsRect& aR2, nsRect* aHStrip, nsRect* aVStrip) { NS_ASSERTION(aR1.TopLeft() == aR2.TopLeft(), "expected rects at the same position"); nsRect unionRect(aR1.x, aR1.y, PR_MAX(aR1.width, aR2.width), PR_MAX(aR1.height, aR2.height)); nscoord VStripStart = PR_MIN(aR1.width, aR2.width); nscoord HStripStart = PR_MIN(aR1.height, aR2.height); *aVStrip = unionRect; aVStrip->x += VStripStart; aVStrip->width -= VStripStart; *aHStrip = unionRect; aHStrip->y += HStripStart; aHStrip->height -= HStripStart; } /** * Reflow a line. The line will either contain a single block frame * or contain 1 or more inline frames. aKeepReflowGoing indicates * whether or not the caller should continue to reflow more lines. */ nsresult nsBlockFrame::ReflowLine(nsBlockReflowState& aState, line_iterator aLine, PRBool* aKeepReflowGoing) { nsresult rv = NS_OK; NS_ABORT_IF_FALSE(aLine->GetChildCount(), "reflowing empty line"); // Setup the line-layout for the new line aState.mCurrentLine = aLine; aLine->ClearDirty(); aLine->InvalidateCachedIsEmpty(); // Now that we know what kind of line we have, reflow it if (aLine->IsBlock()) { nsRect oldBounds = aLine->mFirstChild->GetRect(); nsRect oldCombinedArea(aLine->GetCombinedArea()); rv = ReflowBlockFrame(aState, aLine, aKeepReflowGoing); nsRect newBounds = aLine->mFirstChild->GetRect(); // We expect blocks to damage any area inside their bounds that is // dirty; however, if the frame changes size or position then we // need to do some repainting. // XXX roc --- the above statement is ambiguous about whether 'bounds' // means the frame's bounds or overflowArea, and in fact this is a source // of much confusion and bugs. Thus the following hack considers *both* // overflowArea and bounds. This should be considered a temporary hack // until we decide how it's really supposed to work. nsRect lineCombinedArea(aLine->GetCombinedArea()); if (oldCombinedArea.TopLeft() != lineCombinedArea.TopLeft() || oldBounds.TopLeft() != newBounds.TopLeft()) { // The block has moved, and so to be safe we need to repaint // XXX We need to improve on this... nsRect dirtyRect; dirtyRect.UnionRect(oldCombinedArea, lineCombinedArea); #ifdef NOISY_BLOCK_INVALIDATE printf("%p invalidate 6 (%d, %d, %d, %d)\n", this, dirtyRect.x, dirtyRect.y, dirtyRect.width, dirtyRect.height); #endif Invalidate(dirtyRect); } else { nsRect combinedAreaHStrip, combinedAreaVStrip; nsRect boundsHStrip, boundsVStrip; GetRectDifferenceStrips(oldBounds, newBounds, &boundsHStrip, &boundsVStrip); GetRectDifferenceStrips(oldCombinedArea, lineCombinedArea, &combinedAreaHStrip, &combinedAreaVStrip); #ifdef NOISY_BLOCK_INVALIDATE printf("%p invalidate boundsVStrip (%d, %d, %d, %d)\n", this, boundsVStrip.x, boundsVStrip.y, boundsVStrip.width, boundsVStrip.height); printf("%p invalidate boundsHStrip (%d, %d, %d, %d)\n", this, boundsHStrip.x, boundsHStrip.y, boundsHStrip.width, boundsHStrip.height); printf("%p invalidate combinedAreaVStrip (%d, %d, %d, %d)\n", this, combinedAreaVStrip.x, combinedAreaVStrip.y, combinedAreaVStrip.width, combinedAreaVStrip.height); printf("%p invalidate combinedAreaHStrip (%d, %d, %d, %d)\n", this, combinedAreaHStrip.x, combinedAreaHStrip.y, combinedAreaHStrip.width, combinedAreaHStrip.height); #endif // The first thing Invalidate does is check if the rect is empty, so // don't bother doing that here. Invalidate(boundsVStrip); Invalidate(boundsHStrip); Invalidate(combinedAreaVStrip); Invalidate(combinedAreaHStrip); } } else { nsRect oldCombinedArea(aLine->GetCombinedArea()); aLine->SetLineWrapped(PR_FALSE); rv = ReflowInlineFrames(aState, aLine, aKeepReflowGoing); // We don't really know what changed in the line, so use the union // of the old and new combined areas nsRect dirtyRect; dirtyRect.UnionRect(oldCombinedArea, aLine->GetCombinedArea()); #ifdef NOISY_BLOCK_INVALIDATE printf("%p invalidate (%d, %d, %d, %d)\n", this, dirtyRect.x, dirtyRect.y, dirtyRect.width, dirtyRect.height); if (aLine->IsForceInvalidate()) printf(" dirty line is %p\n", NS_STATIC_CAST(void*, aLine.get()); #endif Invalidate(dirtyRect); } return rv; } /** * Pull frame from the next available location (one of our lines or * one of our next-in-flows lines). */ nsresult nsBlockFrame::PullFrame(nsBlockReflowState& aState, line_iterator aLine, nsIFrame*& aFrameResult) { aFrameResult = nsnull; // First check our remaining lines if (end_lines() != aLine.next()) { #ifdef DEBUG PRBool retry = #endif PullFrameFrom(aState, aLine, this, PR_FALSE, aLine.next(), aFrameResult); NS_ASSERTION(!retry, "Shouldn't have to retry in the current block"); return NS_OK; } NS_ASSERTION(!GetOverflowLines(), "Our overflow lines should have been removed at the start of reflow"); // Try each next in flows nsBlockFrame* nextInFlow = aState.mNextInFlow; while (nextInFlow) { // first normal lines, then overflow lines if (!nextInFlow->mLines.empty()) { if (PullFrameFrom(aState, aLine, nextInFlow, PR_FALSE, nextInFlow->mLines.begin(), aFrameResult)) { // try again with the same value of nextInFlow continue; } break; } nsLineList* overflowLines = nextInFlow->GetOverflowLines(); if (overflowLines) { if (PullFrameFrom(aState, aLine, nextInFlow, PR_TRUE, overflowLines->begin(), aFrameResult)) { // try again with the same value of nextInFlow continue; } break; } nextInFlow = (nsBlockFrame*) nextInFlow->GetNextInFlow(); aState.mNextInFlow = nextInFlow; } return NS_OK; } /** * Try to pull a frame out of a line pointed at by aFromLine. If * aUpdateGeometricParent is set then the pulled frames geometric parent * will be updated (e.g. when pulling from a next-in-flows line list). * * Note: pulling a frame from a line that is a place-holder frame * doesn't automatically remove the corresponding float from the * line's float array. This happens indirectly: either the line gets * emptied (and destroyed) or the line gets reflowed (because we mark * it dirty) and the code at the top of ReflowLine empties the * array. So eventually, it will be removed, just not right away. * * @return PR_TRUE to force retrying of the pull. */ PRBool nsBlockFrame::PullFrameFrom(nsBlockReflowState& aState, nsLineBox* aLine, nsBlockFrame* aFromContainer, PRBool aFromOverflowLine, nsLineList::iterator aFromLine, nsIFrame*& aFrameResult) { nsLineBox* fromLine = aFromLine; NS_ABORT_IF_FALSE(fromLine, "bad line to pull from"); NS_ABORT_IF_FALSE(fromLine->GetChildCount(), "empty line"); NS_ABORT_IF_FALSE(aLine->GetChildCount(), "empty line"); NS_ASSERTION(fromLine->IsBlock() == fromLine->mFirstChild->GetStyleDisplay()->IsBlockLevel(), "Disagreement about whether it's a block or not"); if (fromLine->IsBlock()) { // If our line is not empty and the child in aFromLine is a block // then we cannot pull up the frame into this line. In this case // we stop pulling. aFrameResult = nsnull; } else { // Take frame from fromLine nsIFrame* frame = fromLine->mFirstChild; if (aFromContainer != this) { if (HandleOverflowPlaceholdersForPulledFrame(aState, frame)) { // we lost this one, retry return PR_TRUE; } aLine->LastChild()->SetNextSibling(frame); } // when aFromContainer is 'this', then aLine->LastChild()'s next sibling // is already set correctly. aLine->SetChildCount(aLine->GetChildCount() + 1); PRInt32 fromLineChildCount = fromLine->GetChildCount(); if (0 != --fromLineChildCount) { // Mark line dirty now that we pulled a child fromLine->SetChildCount(fromLineChildCount); fromLine->MarkDirty(); fromLine->mFirstChild = frame->GetNextSibling(); } else { // Free up the fromLine now that it's empty // Its bounds might need to be redrawn, though. // XXX WHY do we invalidate the bounds AND the combined area? doesn't // the combined area always enclose the bounds? Invalidate(fromLine->mBounds); nsLineList* fromLineList = aFromOverflowLine ? aFromContainer->RemoveOverflowLines() : &aFromContainer->mLines; if (aFromLine.next() != fromLineList->end()) aFromLine.next()->MarkPreviousMarginDirty(); Invalidate(fromLine->GetCombinedArea()); fromLineList->erase(aFromLine); // Note that aFromLine just got incremented, so don't use it again here! aState.FreeLineBox(fromLine); // Put any remaining overflow lines back. if (aFromOverflowLine && !fromLineList->empty()) { aFromContainer->SetOverflowLines(fromLineList); } } // Change geometric parents if (aFromContainer != this) { // When pushing and pulling frames we need to check for whether any // views need to be reparented NS_ASSERTION(frame->GetParent() == aFromContainer, "unexpected parent frame"); ReparentFrame(frame, aFromContainer, this); // The frame is being pulled from a next-in-flow; therefore we // need to add it to our sibling list. frame->SetNextSibling(nsnull); if (nsnull != aState.mPrevChild) { aState.mPrevChild->SetNextSibling(frame); } // The frame might have (or contain) floats that need to be // brought over too. ReparentFloats(frame, aFromContainer, aFromOverflowLine, PR_TRUE); } // Stop pulling because we found a frame to pull aFrameResult = frame; #ifdef DEBUG VerifyLines(PR_TRUE); #endif } return PR_FALSE; } static void PlaceFrameView(nsIFrame* aFrame) { if (aFrame->HasView()) nsContainerFrame::PositionFrameView(aFrame); else nsContainerFrame::PositionChildViews(aFrame); } void nsBlockFrame::SlideLine(nsBlockReflowState& aState, nsLineBox* aLine, nscoord aDY) { NS_PRECONDITION(aDY != 0, "why slide a line nowhere?"); Invalidate(aLine->GetCombinedArea()); // Adjust line state aLine->SlideBy(aDY); Invalidate(aLine->GetCombinedArea()); // Adjust the frames in the line nsIFrame* kid = aLine->mFirstChild; if (!kid) { return; } if (aLine->IsBlock()) { if (aDY) { nsPoint p = kid->GetPosition(); p.y += aDY; kid->SetPosition(p); } // Make sure the frame's view and any child views are updated ::PlaceFrameView(kid); } else { // Adjust the Y coordinate of the frames in the line. // Note: we need to re-position views even if aDY is 0, because // one of our parent frames may have moved and so the view's position // relative to its parent may have changed PRInt32 n = aLine->GetChildCount(); while (--n >= 0) { if (aDY) { nsPoint p = kid->GetPosition(); p.y += aDY; kid->SetPosition(p); } // Make sure the frame's view and any child views are updated ::PlaceFrameView(kid); kid = kid->GetNextSibling(); } } } NS_IMETHODIMP nsBlockFrame::AttributeChanged(PRInt32 aNameSpaceID, nsIAtom* aAttribute, PRInt32 aModType) { nsresult rv = nsBlockFrameSuper::AttributeChanged(aNameSpaceID, aAttribute, aModType); if (NS_FAILED(rv)) { return rv; } if (nsGkAtoms::start == aAttribute) { nsPresContext* presContext = PresContext(); // XXX Not sure if this is necessary anymore if (RenumberLists(presContext)) { presContext->PresShell()-> FrameNeedsReflow(this, nsIPresShell::eStyleChange, NS_FRAME_HAS_DIRTY_CHILDREN); } } else if (nsGkAtoms::value == aAttribute) { const nsStyleDisplay* styleDisplay = GetStyleDisplay(); if (NS_STYLE_DISPLAY_LIST_ITEM == styleDisplay->mDisplay) { // Search for the closest ancestor that's a block frame. We // make the assumption that all related list items share a // common block parent. // XXXldb I think that's a bad assumption. nsBlockFrame* blockParent = nsLayoutUtils::FindNearestBlockAncestor(this); // Tell the enclosing block frame to renumber list items within // itself if (nsnull != blockParent) { nsPresContext* presContext = PresContext(); // XXX Not sure if this is necessary anymore if (blockParent->RenumberLists(presContext)) { presContext->PresShell()-> FrameNeedsReflow(blockParent, nsIPresShell::eStyleChange, NS_FRAME_HAS_DIRTY_CHILDREN); } } } } return rv; } inline PRBool IsPaddingZero(nsStyleUnit aUnit, nsStyleCoord &aCoord) { return ((aUnit == eStyleUnit_Coord && aCoord.GetCoordValue() == 0) || (aUnit == eStyleUnit_Percent && aCoord.GetPercentValue() == 0.0)); } inline PRBool IsMarginZero(nsStyleUnit aUnit, nsStyleCoord &aCoord) { return (aUnit == eStyleUnit_Auto || (aUnit == eStyleUnit_Coord && aCoord.GetCoordValue() == 0) || (aUnit == eStyleUnit_Percent && aCoord.GetPercentValue() == 0.0)); } /* virtual */ PRBool nsBlockFrame::IsSelfEmpty() { const nsStylePosition* position = GetStylePosition(); switch (position->mMinHeight.GetUnit()) { case eStyleUnit_Coord: if (position->mMinHeight.GetCoordValue() != 0) return PR_FALSE; break; case eStyleUnit_Percent: if (position->mMinHeight.GetPercentValue() != 0.0f) return PR_FALSE; break; default: return PR_FALSE; } switch (position->mHeight.GetUnit()) { case eStyleUnit_Auto: break; case eStyleUnit_Coord: if (position->mHeight.GetCoordValue() != 0) return PR_FALSE; break; case eStyleUnit_Percent: if (position->mHeight.GetPercentValue() != 0.0f) return PR_FALSE; break; default: return PR_FALSE; } const nsStyleBorder* border = GetStyleBorder(); const nsStylePadding* padding = GetStylePadding(); nsStyleCoord coord; if (border->GetBorderWidth(NS_SIDE_TOP) != 0 || border->GetBorderWidth(NS_SIDE_BOTTOM) != 0 || !IsPaddingZero(padding->mPadding.GetTopUnit(), padding->mPadding.GetTop(coord)) || !IsPaddingZero(padding->mPadding.GetBottomUnit(), padding->mPadding.GetBottom(coord))) { return PR_FALSE; } return PR_TRUE; } PRBool nsBlockFrame::CachedIsEmpty() { if (!IsSelfEmpty()) { return PR_FALSE; } for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { if (!line->CachedIsEmpty()) return PR_FALSE; } return PR_TRUE; } PRBool nsBlockFrame::IsEmpty() { if (!IsSelfEmpty()) { return PR_FALSE; } for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { if (!line->IsEmpty()) return PR_FALSE; } return PR_TRUE; } PRBool nsBlockFrame::ShouldApplyTopMargin(nsBlockReflowState& aState, nsLineBox* aLine) { if (aState.GetFlag(BRS_APPLYTOPMARGIN)) { // Apply short-circuit check to avoid searching the line list return PR_TRUE; } if (!aState.IsAdjacentWithTop()) { // If we aren't at the top Y coordinate then something of non-zero // height must have been placed. Therefore the childs top-margin // applies. aState.SetFlag(BRS_APPLYTOPMARGIN, PR_TRUE); return PR_TRUE; } // Determine if this line is "essentially" the first line line_iterator line = begin_lines(); if (aState.GetFlag(BRS_HAVELINEADJACENTTOTOP)) { line = aState.mLineAdjacentToTop; } while (line != aLine) { if (!line->CachedIsEmpty() || line->HasClearance()) { // A line which precedes aLine is non-empty, or has clearance, // so therefore the top margin applies. aState.SetFlag(BRS_APPLYTOPMARGIN, PR_TRUE); return PR_TRUE; } // No need to apply the top margin if the line has floats. We // should collapse anyway (bug 44419) ++line; aState.SetFlag(BRS_HAVELINEADJACENTTOTOP, PR_TRUE); aState.mLineAdjacentToTop = line; } // The line being reflowed is "essentially" the first line in the // block. Therefore its top-margin will be collapsed by the // generational collapsing logic with its parent (us). return PR_FALSE; } nsIFrame* nsBlockFrame::GetTopBlockChild(nsPresContext* aPresContext) { if (mLines.empty()) return nsnull; nsLineBox *firstLine = mLines.front(); if (firstLine->IsBlock()) return firstLine->mFirstChild; if (!firstLine->CachedIsEmpty()) return nsnull; line_iterator secondLine = begin_lines(); ++secondLine; if (secondLine == end_lines() || !secondLine->IsBlock()) return nsnull; return secondLine->mFirstChild; } // If placeholders/floats split during reflowing a line, but that line will // be put on the next page, then put the placeholders/floats back the way // they were before the line was reflowed. void nsBlockFrame::UndoSplitPlaceholders(nsBlockReflowState& aState, nsIFrame* aLastPlaceholder) { nsIFrame* undoPlaceholder; if (aLastPlaceholder) { undoPlaceholder = aLastPlaceholder->GetNextSibling(); aLastPlaceholder->SetNextSibling(nsnull); } else { undoPlaceholder = aState.mOverflowPlaceholders.FirstChild(); aState.mOverflowPlaceholders.SetFrames(nsnull); } // remove the next in flows of the placeholders that need to be removed for (nsPlaceholderFrame* placeholder = NS_STATIC_CAST(nsPlaceholderFrame*, undoPlaceholder); placeholder; ) { NS_ASSERTION(!placeholder->GetNextInFlow(), "Must be the last placeholder"); nsFrameManager* fm = aState.mPresContext->GetPresShell()->FrameManager(); fm->UnregisterPlaceholderFrame(placeholder); placeholder->SetOutOfFlowFrame(nsnull); // XXX we probably should be doing something with oof here. But what? nsSplittableFrame::RemoveFromFlow(placeholder); nsIFrame* savePlaceholder = placeholder; placeholder = NS_STATIC_CAST(nsPlaceholderFrame*, placeholder->GetNextSibling()); savePlaceholder->Destroy(); } } nsresult nsBlockFrame::ReflowBlockFrame(nsBlockReflowState& aState, line_iterator aLine, PRBool* aKeepReflowGoing) { NS_PRECONDITION(*aKeepReflowGoing, "bad caller"); nsresult rv = NS_OK; nsIFrame* frame = aLine->mFirstChild; if (!frame) { NS_ASSERTION(PR_FALSE, "program error - unexpected empty line"); return NS_ERROR_NULL_POINTER; } // Prepare the block reflow engine const nsStyleDisplay* display = frame->GetStyleDisplay(); nsBlockReflowContext brc(aState.mPresContext, aState.mReflowState); PRUint8 breakType = display->mBreakType; // If a float split and its prev-in-flow was followed by a
    , then combine // the
    's break type with the block's break type (the block will be the very // next frame after the split float). if (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType) { breakType = nsLayoutUtils::CombineBreakType(breakType, aState.mFloatBreakType); aState.mFloatBreakType = NS_STYLE_CLEAR_NONE; } // Clear past floats before the block if the clear style is not none aLine->SetBreakTypeBefore(breakType); // See if we should apply the top margin. If the block frame being // reflowed is a continuation (non-null prev-in-flow) then we don't // apply its top margin because it's not significant. Otherwise, dig // deeper. PRBool applyTopMargin = !frame->GetPrevInFlow() && ShouldApplyTopMargin(aState, aLine); if (applyTopMargin) { // The HasClearance setting is only valid if ShouldApplyTopMargin // returned PR_FALSE (in which case the top-margin-root set our // clearance flag). Otherwise clear it now. We'll set it later on // ourselves if necessary. aLine->ClearHasClearance(); } PRBool treatWithClearance = aLine->HasClearance(); // If our top margin was counted as part of some parents top-margin // collapse and we are being speculatively reflowed assuming this // frame DID NOT need clearance, then we need to check that // assumption. if (!treatWithClearance && !applyTopMargin && breakType != NS_STYLE_CLEAR_NONE && aState.mReflowState.mDiscoveredClearance) { nscoord curY = aState.mY + aState.mPrevBottomMargin.get(); nscoord clearY = aState.ClearFloats(curY, breakType); if (clearY != curY) { // Looks like that assumption was invalid, we do need // clearance. Tell our ancestor so it can reflow again. It is // responsible for actually setting our clearance flag before // the next reflow. treatWithClearance = PR_TRUE; // Only record the first frame that requires clearance if (!*aState.mReflowState.mDiscoveredClearance) { *aState.mReflowState.mDiscoveredClearance = frame; } // Exactly what we do now is flexible since we'll definitely be // reflowed. } } if (treatWithClearance) { applyTopMargin = PR_TRUE; } nsIFrame* clearanceFrame = nsnull; nscoord startingY = aState.mY; nsCollapsingMargin incomingMargin = aState.mPrevBottomMargin; nscoord clearance; // Save the original position of the frame so that we can reposition // its view as needed. nsPoint originalPosition = frame->GetPosition(); while (PR_TRUE) { // Save the frame's current position. We might need it later. nscoord passOriginalY = frame->GetRect().y; clearance = 0; nscoord topMargin = 0; PRBool mayNeedRetry = PR_FALSE; if (applyTopMargin) { // Precompute the blocks top margin value so that we can get the // correct available space (there might be a float that's // already been placed below the aState.mPrevBottomMargin // Setup a reflowState to get the style computed margin-top // value. We'll use a reason of `resize' so that we don't fudge // any incremental reflow state. // The availSpace here is irrelevant to our needs - all we want // out if this setup is the margin-top value which doesn't depend // on the childs available space. // XXX building a complete nsHTMLReflowState just to get the margin-top // seems like a waste. And we do this for almost every block! nsSize availSpace(aState.mContentArea.width, NS_UNCONSTRAINEDSIZE); nsHTMLReflowState reflowState(aState.mPresContext, aState.mReflowState, frame, availSpace); if (treatWithClearance) { aState.mY += aState.mPrevBottomMargin.get(); aState.mPrevBottomMargin.Zero(); } // Now compute the collapsed margin-top value into aState.mPrevBottomMargin, assuming // that all child margins collapse down to clearanceFrame. nsBlockReflowContext::ComputeCollapsedTopMargin(reflowState, &aState.mPrevBottomMargin, clearanceFrame, &mayNeedRetry); // XXX optimization; we could check the collapsing children to see if they are sure // to require clearance, and so avoid retrying them if (clearanceFrame) { // Don't allow retries on the second pass. The clearance decisions for the // blocks whose top-margins collapse with ours are now fixed. mayNeedRetry = PR_FALSE; } if (!treatWithClearance && !clearanceFrame && breakType != NS_STYLE_CLEAR_NONE) { // We don't know if we need clearance and this is the first, // optimistic pass. So determine whether *this block* needs // clearance. Note that we do not allow the decision for whether // this block has clearance to change on the second pass; that // decision is only allowed to be made under the optimistic // first pass. nscoord curY = aState.mY + aState.mPrevBottomMargin.get(); nscoord clearY = aState.ClearFloats(curY, breakType); if (clearY != curY) { // Looks like we need clearance and we didn't know about it already. So // recompute collapsed margin treatWithClearance = PR_TRUE; // Remember this decision, needed for incremental reflow aLine->SetHasClearance(); // Apply incoming margins aState.mY += aState.mPrevBottomMargin.get(); aState.mPrevBottomMargin.Zero(); // Compute the collapsed margin again, ignoring the incoming margin this time mayNeedRetry = PR_FALSE; nsBlockReflowContext::ComputeCollapsedTopMargin(reflowState, &aState.mPrevBottomMargin, clearanceFrame, &mayNeedRetry); } } // Temporarily advance the running Y value so that the // GetAvailableSpace method will return the right available // space. This undone as soon as the horizontal margins are // computed. topMargin = aState.mPrevBottomMargin.get(); if (treatWithClearance) { nscoord currentY = aState.mY; // advance mY to the clear position. aState.mY = aState.ClearFloats(aState.mY, breakType); // Compute clearance. It's the amount we need to add to the top // border-edge of the frame, after applying collapsed margins // from the frame and its children, to get it to line up with // the bottom of the floats. The former is currentY + topMargin, // the latter is the current aState.mY. // Note that negative clearance is possible clearance = aState.mY - (currentY + topMargin); // Add clearance to our top margin while we compute available // space for the frame topMargin += clearance; // Note that aState.mY should stay where it is: at the top // border-edge of the frame } else { // Advance aState.mY to the top border-edge of the frame. aState.mY += topMargin; } } // Here aState.mY is the top border-edge of the block. // Compute the available space for the block aState.GetAvailableSpace(); #ifdef REALLY_NOISY_REFLOW printf("setting line %p isImpacted to %s\n", aLine.get(), aState.IsImpactedByFloat()?"true":"false"); #endif PRBool isImpacted = aState.IsImpactedByFloat() ? PR_TRUE : PR_FALSE; aLine->SetLineIsImpactedByFloat(isImpacted); nsRect availSpace; aState.ComputeBlockAvailSpace(frame, display, availSpace); // Now put the Y coordinate back to the top of the top-margin + // clearance, and flow the block. aState.mY -= topMargin; availSpace.y -= topMargin; if (NS_UNCONSTRAINEDSIZE != availSpace.height) { availSpace.height += topMargin; } // keep track of the last overflow float in case we need to undo any new additions nsIFrame* lastPlaceholder = aState.mOverflowPlaceholders.LastChild(); // Reflow the block into the available space nsMargin computedOffsets; // construct the html reflow state for the block. ReflowBlock // will initialize it nsHTMLReflowState blockHtmlRS(aState.mPresContext, aState.mReflowState, frame, nsSize(availSpace.width, availSpace.height)); blockHtmlRS.mFlags.mHasClearance = aLine->HasClearance(); nsSpaceManager::SavedState spaceManagerState; if (mayNeedRetry) { blockHtmlRS.mDiscoveredClearance = &clearanceFrame; aState.mSpaceManager->PushState(&spaceManagerState); } else if (!applyTopMargin) { blockHtmlRS.mDiscoveredClearance = aState.mReflowState.mDiscoveredClearance; } nsReflowStatus frameReflowStatus = NS_FRAME_COMPLETE; rv = brc.ReflowBlock(availSpace, applyTopMargin, aState.mPrevBottomMargin, clearance, aState.IsAdjacentWithTop(), computedOffsets, blockHtmlRS, frameReflowStatus); // If this was a second-pass reflow and the block's vertical position // changed, invalidates from the first pass might have happened in the // wrong places. Invalidate the entire overflow rect at the new position. if (!mayNeedRetry && clearanceFrame && frame->GetRect().y != passOriginalY) { Invalidate(frame->GetOverflowRect() + frame->GetPosition()); } NS_ENSURE_SUCCESS(rv, rv); if (mayNeedRetry && clearanceFrame) { UndoSplitPlaceholders(aState, lastPlaceholder); aState.mSpaceManager->PopState(&spaceManagerState); aState.mY = startingY; aState.mPrevBottomMargin = incomingMargin; continue; } aState.mPrevChild = frame; #if defined(REFLOW_STATUS_COVERAGE) RecordReflowStatus(PR_TRUE, frameReflowStatus); #endif if (NS_INLINE_IS_BREAK_BEFORE(frameReflowStatus)) { // None of the child block fits. UndoSplitPlaceholders(aState, lastPlaceholder); PushLines(aState, aLine.prev()); *aKeepReflowGoing = PR_FALSE; aState.mReflowStatus = NS_FRAME_NOT_COMPLETE; } else { // Note: line-break-after a block is a nop // Try to place the child block. // Don't force the block to fit if we have positive clearance, because // pushing it to the next page would give it more room. // Don't force the block to fit if it's impacted by a float. If it is, // then pushing it to the next page would give it more room. Note that // isImpacted doesn't include impact from the block's own floats. PRBool forceFit = aState.IsAdjacentWithTop() && clearance <= 0 && !isImpacted; nsCollapsingMargin collapsedBottomMargin; nsRect combinedArea(0,0,0,0); *aKeepReflowGoing = brc.PlaceBlock(blockHtmlRS, forceFit, aLine.get(), computedOffsets, collapsedBottomMargin, aLine->mBounds, combinedArea, frameReflowStatus); if (aLine->SetCarriedOutBottomMargin(collapsedBottomMargin)) { line_iterator nextLine = aLine; ++nextLine; if (nextLine != end_lines()) { nextLine->MarkPreviousMarginDirty(); } } aLine->SetCombinedArea(combinedArea); if (*aKeepReflowGoing) { // Some of the child block fit // Advance to new Y position nscoord newY = aLine->mBounds.YMost(); aState.mY = newY; // Continue the block frame now if it didn't completely fit in // the available space. if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) { PRBool madeContinuation; rv = CreateContinuationFor(aState, nsnull, frame, madeContinuation); NS_ENSURE_SUCCESS(rv, rv); nsIFrame* nextFrame = frame->GetNextInFlow(); // Push continuation to a new line, but only if we actually made one. if (madeContinuation) { nsLineBox* line = aState.NewLineBox(nextFrame, 1, PR_TRUE); NS_ENSURE_TRUE(line, NS_ERROR_OUT_OF_MEMORY); mLines.after_insert(aLine, line); } // Advance to next line since some of the block fit. That way // only the following lines will be pushed. PushLines(aState, aLine); aState.mReflowStatus = NS_FRAME_NOT_COMPLETE; // If we need to reflow the continuation of the block child, // then we'd better reflow our continuation if (frameReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) { aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW; // We also need to make that continuation's line dirty so // it gets reflowed when we reflow our next in flow. The // nif's line must always be either a line of the nif's // parent block (only if we didn't make a continuation) or // else one of our own overflow lines. In the latter case // the line is already marked dirty, so just handle the // first case. if (!madeContinuation) { nsBlockFrame* nifBlock = NS_STATIC_CAST(nsBlockFrame*, nextFrame->GetParent()); NS_ASSERTION(nifBlock->GetType() == nsGkAtoms::blockFrame || nifBlock->GetType() == nsGkAtoms::areaFrame, "A block's child's next in flow's parent must be a block!"); for (line_iterator line = nifBlock->begin_lines(), line_end = nifBlock->end_lines(); line != line_end; ++line) { if (line->Contains(nextFrame)) { line->MarkDirty(); break; } } } } *aKeepReflowGoing = PR_FALSE; // The bottom margin for a block is only applied on the last // flow block. Since we just continued the child block frame, // we know that line->mFirstChild is not the last flow block // therefore zero out the running margin value. #ifdef NOISY_VERTICAL_MARGINS ListTag(stdout); printf(": reflow incomplete, frame="); nsFrame::ListTag(stdout, frame); printf(" prevBottomMargin=%d, setting to zero\n", aState.mPrevBottomMargin); #endif aState.mPrevBottomMargin.Zero(); } else { #ifdef NOISY_VERTICAL_MARGINS ListTag(stdout); printf(": reflow complete for "); nsFrame::ListTag(stdout, frame); printf(" prevBottomMargin=%d collapsedBottomMargin=%d\n", aState.mPrevBottomMargin, collapsedBottomMargin.get()); #endif aState.mPrevBottomMargin = collapsedBottomMargin; } #ifdef NOISY_VERTICAL_MARGINS ListTag(stdout); printf(": frame="); nsFrame::ListTag(stdout, frame); printf(" carriedOutBottomMargin=%d collapsedBottomMargin=%d => %d\n", brc.GetCarriedOutBottomMargin(), collapsedBottomMargin.get(), aState.mPrevBottomMargin); #endif } else { // None of the block fits. Determine the correct reflow status. if (aLine == mLines.front()) { // If it's our very first line then we need to be pushed to // our parents next-in-flow. Therefore, return break-before // status for our reflow status. aState.mReflowStatus = NS_INLINE_LINE_BREAK_BEFORE(); } else { // Push the line that didn't fit and any lines that follow it // to our next-in-flow. UndoSplitPlaceholders(aState, lastPlaceholder); PushLines(aState, aLine.prev()); aState.mReflowStatus = NS_FRAME_NOT_COMPLETE; } } } break; // out of the reflow retry loop } // Now that we've got its final position all figured out, position any child // views it may have. Note that the case when frame has a view got handled // by FinishReflowChild, but that function didn't have the coordinates needed // to correctly decide whether to reposition child views. if (originalPosition != frame->GetPosition() && !frame->HasView()) { nsContainerFrame::PositionChildViews(frame); } #ifdef DEBUG VerifyLines(PR_TRUE); #endif return rv; } nsresult nsBlockFrame::ReflowInlineFrames(nsBlockReflowState& aState, line_iterator aLine, PRBool* aKeepReflowGoing) { nsresult rv = NS_OK; *aKeepReflowGoing = PR_TRUE; #ifdef DEBUG PRInt32 spins = 0; #endif LineReflowStatus lineReflowStatus = LINE_REFLOW_REDO_NEXT_BAND; PRBool movedPastFloat = PR_FALSE; do { PRBool allowPullUp = PR_TRUE; nsIContent* forceBreakInContent = nsnull; PRInt32 forceBreakOffset = -1; do { nsSpaceManager::SavedState spaceManagerState; aState.mReflowState.mSpaceManager->PushState(&spaceManagerState); // Once upon a time we allocated the first 30 nsLineLayout objects // on the stack, and then we switched to the heap. At that time // these objects were large (1100 bytes on a 32 bit system). // Then the nsLineLayout object was shrunk to 156 bytes by // removing some internal buffers. Given that it is so much // smaller, the complexity of 2 different ways of allocating // no longer makes sense. Now we always allocate on the stack nsLineLayout lineLayout(aState.mPresContext, aState.mReflowState.mSpaceManager, &aState.mReflowState, &aLine); lineLayout.Init(&aState, aState.mMinLineHeight, aState.mLineNumber); if (forceBreakInContent) { lineLayout.ForceBreakAtPosition(forceBreakInContent, forceBreakOffset); } rv = DoReflowInlineFrames(aState, lineLayout, aLine, aKeepReflowGoing, &lineReflowStatus, allowPullUp); lineLayout.EndLineReflow(); if (LINE_REFLOW_REDO_NO_PULL == lineReflowStatus || LINE_REFLOW_REDO_NEXT_BAND == lineReflowStatus) { if (lineLayout.NeedsBackup()) { NS_ASSERTION(!forceBreakInContent, "Backing up twice; this should never be necessary"); // If there is no saved break position, then this will set // set forceBreakInContent to null and we won't back up, which is // correct. forceBreakInContent = lineLayout.GetLastOptionalBreakPosition(&forceBreakOffset); } else { forceBreakInContent = nsnull; } // restore the space manager state aState.mReflowState.mSpaceManager->PopState(&spaceManagerState); // Clear out float lists aState.mCurrentLineFloats.DeleteAll(); aState.mBelowCurrentLineFloats.DeleteAll(); } #ifdef DEBUG spins++; if (1000 == spins) { ListTag(stdout); printf(": yikes! spinning on a line over 1000 times!\n"); NS_ABORT(); } #endif // Don't allow pullup on a subsequent LINE_REFLOW_REDO_NO_PULL pass allowPullUp = PR_FALSE; } while (NS_SUCCEEDED(rv) && LINE_REFLOW_REDO_NO_PULL == lineReflowStatus); if (LINE_REFLOW_REDO_NEXT_BAND == lineReflowStatus) { movedPastFloat = PR_TRUE; } } while (NS_SUCCEEDED(rv) && LINE_REFLOW_REDO_NEXT_BAND == lineReflowStatus); // If we did at least one REDO_FOR_FLOAT, then the line did not fit next to some float. // Mark it as impacted by a float, even if it no longer is next to a float. if (movedPastFloat) { aLine->SetLineIsImpactedByFloat(PR_TRUE); } return rv; } // If at least one float on the line was complete, not at the top of // page, but was truncated, then restore the overflow floats to what // they were before and push the line. The floats that will be removed // from the list aren't yet known by the block's next in flow. void nsBlockFrame::PushTruncatedPlaceholderLine(nsBlockReflowState& aState, line_iterator aLine, nsIFrame* aLastPlaceholder, PRBool& aKeepReflowGoing) { UndoSplitPlaceholders(aState, aLastPlaceholder); line_iterator prevLine = aLine; --prevLine; PushLines(aState, prevLine); aKeepReflowGoing = PR_FALSE; aState.mReflowStatus = NS_FRAME_NOT_COMPLETE; } #ifdef DEBUG static const char* LineReflowStatusNames[] = { "LINE_REFLOW_OK", "LINE_REFLOW_STOP", "LINE_REFLOW_REDO_NO_PULL", "LINE_REFLOW_REDO_NEXT_BAND", "LINE_REFLOW_TRUNCATED" }; #endif nsresult nsBlockFrame::DoReflowInlineFrames(nsBlockReflowState& aState, nsLineLayout& aLineLayout, line_iterator aLine, PRBool* aKeepReflowGoing, LineReflowStatus* aLineReflowStatus, PRBool aAllowPullUp) { // Forget all of the floats on the line aLine->FreeFloats(aState.mFloatCacheFreeList); aState.mFloatCombinedArea.SetRect(0, 0, 0, 0); // Setup initial coordinate system for reflowing the inline frames // into. Apply a previous block frame's bottom margin first. if (ShouldApplyTopMargin(aState, aLine)) { aState.mY += aState.mPrevBottomMargin.get(); } aState.GetAvailableSpace(); PRBool impactedByFloats = aState.IsImpactedByFloat() ? PR_TRUE : PR_FALSE; aLine->SetLineIsImpactedByFloat(impactedByFloats); #ifdef REALLY_NOISY_REFLOW printf("nsBlockFrame::DoReflowInlineFrames %p impacted = %d\n", this, impactedByFloats); #endif const nsMargin& borderPadding = aState.BorderPadding(); nscoord x = aState.mAvailSpaceRect.x + borderPadding.left; nscoord availWidth = aState.mAvailSpaceRect.width; nscoord availHeight; if (aState.GetFlag(BRS_UNCONSTRAINEDHEIGHT)) { availHeight = NS_UNCONSTRAINEDSIZE; } else { /* XXX get the height right! */ availHeight = aState.mAvailSpaceRect.height; } // Make sure to enable resize optimization before we call BeginLineReflow // because it might get disabled there aLine->EnableResizeReflowOptimization(); aLineLayout.BeginLineReflow(x, aState.mY, availWidth, availHeight, impactedByFloats, PR_FALSE /*XXX isTopOfPage*/); // XXX Unfortunately we need to know this before reflowing the first // inline frame in the line. FIX ME. if ((0 == aLineLayout.GetLineNumber()) && (NS_BLOCK_HAS_FIRST_LETTER_STYLE & mState)) { aLineLayout.SetFirstLetterStyleOK(PR_TRUE); } // keep track of the last overflow float in case we need to undo any new additions nsIFrame* lastPlaceholder = aState.mOverflowPlaceholders.LastChild(); // Reflow the frames that are already on the line first nsresult rv = NS_OK; LineReflowStatus lineReflowStatus = LINE_REFLOW_OK; PRInt32 i; nsIFrame* frame = aLine->mFirstChild; // Determine whether this is a line of placeholders for out-of-flow // continuations PRBool isContinuingPlaceholders = PR_FALSE; if (impactedByFloats) { // There is a soft break opportunity at the start of the line, because // we can always move this line down below float(s). if (aLineLayout.NotifyOptionalBreakPosition(frame->GetContent(), 0, PR_TRUE)) { lineReflowStatus = LINE_REFLOW_REDO_NEXT_BAND; } } // need to repeatedly call GetChildCount here, because the child // count can change during the loop! for (i = 0; LINE_REFLOW_OK == lineReflowStatus && i < aLine->GetChildCount(); i++, frame = frame->GetNextSibling()) { if (IsContinuationPlaceholder(frame)) { isContinuingPlaceholders = PR_TRUE; } rv = ReflowInlineFrame(aState, aLineLayout, aLine, frame, &lineReflowStatus); NS_ENSURE_SUCCESS(rv, rv); if (LINE_REFLOW_OK != lineReflowStatus) { // It is possible that one or more of next lines are empty // (because of DeleteNextInFlowChild). If so, delete them now // in case we are finished. ++aLine; while ((aLine != end_lines()) && (0 == aLine->GetChildCount())) { // XXX Is this still necessary now that DeleteNextInFlowChild // uses DoRemoveFrame? nsLineBox *toremove = aLine; aLine = mLines.erase(aLine); NS_ASSERTION(nsnull == toremove->mFirstChild, "bad empty line"); aState.FreeLineBox(toremove); } --aLine; if (LINE_REFLOW_TRUNCATED == lineReflowStatus) { // Push the line with the truncated float PushTruncatedPlaceholderLine(aState, aLine, lastPlaceholder, *aKeepReflowGoing); } } } // Don't pull up new frames into lines with continuation placeholders if (!isContinuingPlaceholders && aAllowPullUp) { // Pull frames and reflow them until we can't while (LINE_REFLOW_OK == lineReflowStatus) { rv = PullFrame(aState, aLine, frame); NS_ENSURE_SUCCESS(rv, rv); if (nsnull == frame) { break; } while (LINE_REFLOW_OK == lineReflowStatus) { PRInt32 oldCount = aLine->GetChildCount(); rv = ReflowInlineFrame(aState, aLineLayout, aLine, frame, &lineReflowStatus); NS_ENSURE_SUCCESS(rv, rv); if (aLine->GetChildCount() != oldCount) { // We just created a continuation for aFrame AND its going // to end up on this line (e.g. :first-letter // situation). Therefore we have to loop here before trying // to pull another frame. frame = frame->GetNextSibling(); } else { break; } } } } // We only need to backup if the line isn't going to be reflowed again anyway PRBool needsBackup = aLineLayout.NeedsBackup() && (lineReflowStatus == LINE_REFLOW_STOP || lineReflowStatus == LINE_REFLOW_OK); if (needsBackup && aLineLayout.HaveForcedBreakPosition()) { NS_WARNING("We shouldn't be backing up more than once! " "Someone must have set a break opportunity beyond the available width, " "even though there were better break opportunities before it"); needsBackup = PR_FALSE; } if (needsBackup) { // We need to try backing up to before a text run PRInt32 offset; nsIContent* breakContent = aLineLayout.GetLastOptionalBreakPosition(&offset); // XXX It's possible, in fact not unusual, for the break opportunity to already // be the end of the line. We should detect that and optimize to not // re-do the line. if (breakContent) { // We can back up! lineReflowStatus = LINE_REFLOW_REDO_NO_PULL; } } else { // In case we reflow this line again, remember that we don't // need to force any breaking aLineLayout.ClearOptionalBreakPosition(); } if (LINE_REFLOW_REDO_NEXT_BAND == lineReflowStatus) { // This happens only when we have a line that is impacted by // floats and the first element in the line doesn't fit with // the floats. // // What we do is to advance past the first float we find and // then reflow the line all over again. NS_ASSERTION(aState.IsImpactedByFloat(), "redo line on totally empty line"); NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aState.mAvailSpaceRect.height, "unconstrained height on totally empty line"); if (aState.mAvailSpaceRect.height > 0) { aState.mY += aState.mAvailSpaceRect.height; } else { NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aState.mReflowState.availableHeight, "We shouldn't be running out of height here"); if (NS_UNCONSTRAINEDSIZE == aState.mReflowState.availableHeight) { // just move it down a bit to try to get out of this mess aState.mY += 1; } else { // There's nowhere to retry placing the line. Just treat it as if // we placed the float but it was truncated so we need this line // to go to the next page/column. lineReflowStatus = LINE_REFLOW_TRUNCATED; // Push the line that didn't fit PushTruncatedPlaceholderLine(aState, aLine, lastPlaceholder, *aKeepReflowGoing); } } // We don't want to advance by the bottom margin anymore (we did it // once at the beginning of this function, which will just be called // again), and we certainly don't want to go back if it's negative // (infinite loop, bug 153429). aState.mPrevBottomMargin.Zero(); // XXX: a small optimization can be done here when paginating: // if the new Y coordinate is past the end of the block then // push the line and return now instead of later on after we are // past the float. } else if (LINE_REFLOW_REDO_NO_PULL == lineReflowStatus) { // We don't want to advance by the bottom margin anymore (we did it // once at the beginning of this function, which will just be called // again), and we certainly don't want to go back if it's negative // (infinite loop, bug 153429). aState.mPrevBottomMargin.Zero(); } else if (LINE_REFLOW_TRUNCATED != lineReflowStatus) { // If we are propagating out a break-before status then there is // no point in placing the line. if (!NS_INLINE_IS_BREAK_BEFORE(aState.mReflowStatus)) { if (PlaceLine(aState, aLineLayout, aLine, aKeepReflowGoing)) { UndoSplitPlaceholders(aState, lastPlaceholder); // undo since we pushed the current line } } } #ifdef DEBUG if (gNoisyReflow) { printf("Line reflow status = %s\n", LineReflowStatusNames[lineReflowStatus]); } #endif *aLineReflowStatus = lineReflowStatus; return rv; } /** * Reflow an inline frame. The reflow status is mapped from the frames * reflow status to the lines reflow status (not to our reflow status). * The line reflow status is simple: PR_TRUE means keep placing frames * on the line; PR_FALSE means don't (the line is done). If the line * has some sort of breaking affect then aLine's break-type will be set * to something other than NS_STYLE_CLEAR_NONE. */ nsresult nsBlockFrame::ReflowInlineFrame(nsBlockReflowState& aState, nsLineLayout& aLineLayout, line_iterator aLine, nsIFrame* aFrame, LineReflowStatus* aLineReflowStatus) { NS_ENSURE_ARG_POINTER(aFrame); *aLineReflowStatus = LINE_REFLOW_OK; // If it's currently ok to be reflowing in first-letter style then // we must be about to reflow a frame that has first-letter style. PRBool reflowingFirstLetter = aLineLayout.GetFirstLetterStyleOK(); #ifdef NOISY_FIRST_LETTER ListTag(stdout); printf(": reflowing "); nsFrame::ListTag(stdout, aFrame); printf(" reflowingFirstLetter=%s\n", reflowingFirstLetter ? "on" : "off"); #endif // Reflow the inline frame nsReflowStatus frameReflowStatus; PRBool pushedFrame; nsresult rv = aLineLayout.ReflowFrame(aFrame, frameReflowStatus, nsnull, pushedFrame); NS_ENSURE_SUCCESS(rv, rv); if (frameReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) { // we need to ensure that the frame's nextinflow gets reflowed. aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW; nsBlockFrame* ourNext = NS_STATIC_CAST(nsBlockFrame*, GetNextInFlow()); if (ourNext && aFrame->GetNextInFlow()) { line_iterator f = ourNext->FindLineFor(aFrame->GetNextInFlow()); if (f != ourNext->end_lines()) { f->MarkDirty(); } } } NS_ENSURE_SUCCESS(rv, rv); #ifdef REALLY_NOISY_REFLOW_CHILD nsFrame::ListTag(stdout, aFrame); printf(": status=%x\n", frameReflowStatus); #endif #if defined(REFLOW_STATUS_COVERAGE) RecordReflowStatus(PR_FALSE, frameReflowStatus); #endif // Send post-reflow notification aState.mPrevChild = aFrame; /* XXX This is where we need to add logic to handle some odd behavior. For one thing, we should usually place at least one thing next to a left float, even when that float takes up all the width on a line. see bug 22496 */ // Process the child frames reflow status. There are 5 cases: // complete, not-complete, break-before, break-after-complete, // break-after-not-complete. There are two situations: we are a // block or we are an inline. This makes a total of 10 cases // (fortunately, there is some overlap). aLine->SetBreakTypeAfter(NS_STYLE_CLEAR_NONE); if (NS_INLINE_IS_BREAK(frameReflowStatus) || (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType)) { // Always abort the line reflow (because a line break is the // minimal amount of break we do). *aLineReflowStatus = LINE_REFLOW_STOP; // XXX what should aLine's break-type be set to in all these cases? PRUint8 breakType = NS_INLINE_GET_BREAK_TYPE(frameReflowStatus); NS_ASSERTION((NS_STYLE_CLEAR_NONE != breakType) || (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType), "bad break type"); NS_ASSERTION(NS_STYLE_CLEAR_PAGE != breakType, "no page breaks yet"); if (NS_INLINE_IS_BREAK_BEFORE(frameReflowStatus)) { // Break-before cases. if (aFrame == aLine->mFirstChild) { // If we break before the first frame on the line then we must // be trying to place content where there's no room (e.g. on a // line with wide floats). Inform the caller to reflow the // line after skipping past a float. *aLineReflowStatus = LINE_REFLOW_REDO_NEXT_BAND; } else { // It's not the first child on this line so go ahead and split // the line. We will see the frame again on the next-line. rv = SplitLine(aState, aLineLayout, aLine, aFrame, aLineReflowStatus); NS_ENSURE_SUCCESS(rv, rv); // If we're splitting the line because the frame didn't fit and it // was pushed, then mark the line as having word wrapped. We need to // know that if we're shrink wrapping our width if (pushedFrame) { aLine->SetLineWrapped(PR_TRUE); } } } else { // If a float split and its prev-in-flow was followed by a
    , then combine // the
    's break type with the inline's break type (the inline will be the very // next frame after the split float). if (NS_STYLE_CLEAR_NONE != aState.mFloatBreakType) { breakType = nsLayoutUtils::CombineBreakType(breakType, aState.mFloatBreakType); aState.mFloatBreakType = NS_STYLE_CLEAR_NONE; } // Break-after cases if (breakType == NS_STYLE_CLEAR_LINE) { if (!aLineLayout.GetLineEndsInBR()) { breakType = NS_STYLE_CLEAR_NONE; } } aLine->SetBreakTypeAfter(breakType); if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) { // Create a continuation for the incomplete frame. Note that the // frame may already have a continuation. PRBool madeContinuation; rv = CreateContinuationFor(aState, aLine, aFrame, madeContinuation); NS_ENSURE_SUCCESS(rv, rv); if (!aLineLayout.GetLineEndsInBR()) { // Remember that the line has wrapped aLine->SetLineWrapped(PR_TRUE); } } // Split line, but after the frame just reflowed rv = SplitLine(aState, aLineLayout, aLine, aFrame->GetNextSibling(), aLineReflowStatus); NS_ENSURE_SUCCESS(rv, rv); if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus) || (NS_INLINE_IS_BREAK_AFTER(frameReflowStatus) && !aLineLayout.GetLineEndsInBR())) { // Mark next line dirty in case SplitLine didn't end up // pushing any frames. nsLineList_iterator next = aLine.next(); if (next != end_lines() && !next->IsBlock()) { next->MarkDirty(); } } } } else if (NS_FRAME_IS_NOT_COMPLETE(frameReflowStatus)) { // Frame is not-complete, no special breaking status nsIAtom* frameType = aFrame->GetType(); // Create a continuation for the incomplete frame. Note that the // frame may already have a continuation. PRBool madeContinuation; rv = (nsGkAtoms::placeholderFrame == frameType) ? SplitPlaceholder(aState, aFrame) : CreateContinuationFor(aState, aLine, aFrame, madeContinuation); NS_ENSURE_SUCCESS(rv, rv); // Remember that the line has wrapped if (!aLineLayout.GetLineEndsInBR()) { aLine->SetLineWrapped(PR_TRUE); } // If we are reflowing the first letter frame or a placeholder then // don't split the line and don't stop the line reflow... PRBool splitLine = !reflowingFirstLetter && nsGkAtoms::placeholderFrame != frameType; if (reflowingFirstLetter) { if ((nsGkAtoms::inlineFrame == frameType) || (nsGkAtoms::lineFrame == frameType)) { splitLine = PR_TRUE; } } if (splitLine) { // Split line after the current frame *aLineReflowStatus = LINE_REFLOW_STOP; rv = SplitLine(aState, aLineLayout, aLine, aFrame->GetNextSibling(), aLineReflowStatus); NS_ENSURE_SUCCESS(rv, rv); // Mark next line dirty in case SplitLine didn't end up // pushing any frames. nsLineList_iterator next = aLine.next(); if (next != end_lines() && !next->IsBlock()) { next->MarkDirty(); } } } else if (NS_FRAME_IS_TRUNCATED(frameReflowStatus)) { // if the frame is a placeholder and was complete but truncated (and not at the top // of page), the entire line will be pushed to give it another chance to not truncate. if (nsGkAtoms::placeholderFrame == aFrame->GetType()) { *aLineReflowStatus = LINE_REFLOW_TRUNCATED; } } return NS_OK; } /** * Create a continuation, if necessary, for aFrame. Place it in aLine * if aLine is not null. Set aMadeNewFrame to PR_TRUE if a new frame is created. */ nsresult nsBlockFrame::CreateContinuationFor(nsBlockReflowState& aState, nsLineBox* aLine, nsIFrame* aFrame, PRBool& aMadeNewFrame) { aMadeNewFrame = PR_FALSE; nsresult rv; nsIFrame* nextInFlow; rv = CreateNextInFlow(aState.mPresContext, this, aFrame, nextInFlow); NS_ENSURE_SUCCESS(rv, rv); if (nsnull != nextInFlow) { aMadeNewFrame = PR_TRUE; if (aLine) { aLine->SetChildCount(aLine->GetChildCount() + 1); } } #ifdef DEBUG VerifyLines(PR_FALSE); #endif return rv; } nsresult nsBlockFrame::SplitPlaceholder(nsBlockReflowState& aState, nsIFrame* aPlaceholder) { nsIFrame* nextInFlow; nsresult rv = CreateNextInFlow(aState.mPresContext, this, aPlaceholder, nextInFlow); NS_ENSURE_SUCCESS(rv, rv); if (!nextInFlow) { // Next in flow was not created because it already exists. return NS_OK; } // put the sibling list back to what it was before the continuation was created nsIFrame *contFrame = aPlaceholder->GetNextSibling(); nsIFrame *next = contFrame->GetNextSibling(); aPlaceholder->SetNextSibling(next); contFrame->SetNextSibling(nsnull); NS_ASSERTION(IsContinuationPlaceholder(contFrame), "Didn't create the right kind of frame"); // The new out of flow frame does not get put anywhere; the out-of-flows // for placeholders in mOverflowPlaceholders are not kept in any child list aState.mOverflowPlaceholders.AppendFrame(this, contFrame); return NS_OK; } static nsFloatCache* GetLastFloat(nsLineBox* aLine) { nsFloatCache* fc = aLine->GetFirstFloat(); while (fc && fc->Next()) { fc = fc->Next(); } return fc; } static PRBool CheckPlaceholderInLine(nsIFrame* aBlock, nsLineBox* aLine, nsFloatCache* aFC) { if (!aFC) return PR_TRUE; for (nsIFrame* f = aFC->mPlaceholder; f; f = f->GetParent()) { if (f->GetParent() == aBlock) return aLine->Contains(f); } NS_ASSERTION(PR_FALSE, "aBlock is not an ancestor of aFrame!"); return PR_TRUE; } nsresult nsBlockFrame::SplitLine(nsBlockReflowState& aState, nsLineLayout& aLineLayout, line_iterator aLine, nsIFrame* aFrame, LineReflowStatus* aLineReflowStatus) { NS_ABORT_IF_FALSE(aLine->IsInline(), "illegal SplitLine on block line"); PRInt32 pushCount = aLine->GetChildCount() - aLineLayout.GetCurrentSpanCount(); NS_ABORT_IF_FALSE(pushCount >= 0, "bad push count"); #ifdef DEBUG if (gNoisyReflow) { nsFrame::IndentBy(stdout, gNoiseIndent); printf("split line: from line=%p pushCount=%d aFrame=", NS_STATIC_CAST(void*, aLine.get()), pushCount); if (aFrame) { nsFrame::ListTag(stdout, aFrame); } else { printf("(null)"); } printf("\n"); if (gReallyNoisyReflow) { aLine->List(stdout, gNoiseIndent+1); } } #endif if (0 != pushCount) { NS_ABORT_IF_FALSE(aLine->GetChildCount() > pushCount, "bad push"); NS_ABORT_IF_FALSE(nsnull != aFrame, "whoops"); NS_ASSERTION(nsFrameList(aFrame).GetLength() >= pushCount, "Not enough frames to push"); // Put frames being split out into their own line nsLineBox* newLine = aState.NewLineBox(aFrame, pushCount, PR_FALSE); if (!newLine) { return NS_ERROR_OUT_OF_MEMORY; } mLines.after_insert(aLine, newLine); aLine->SetChildCount(aLine->GetChildCount() - pushCount); #ifdef DEBUG if (gReallyNoisyReflow) { newLine->List(stdout, gNoiseIndent+1); } #endif // Let line layout know that some frames are no longer part of its // state. aLineLayout.SplitLineTo(aLine->GetChildCount()); // If floats have been placed whose placeholders have been pushed to the new // line, we need to reflow the old line again. We don't want to look at the // frames in the new line, because as a large paragraph is laid out the // we'd get O(N^2) performance. So instead we just check that the last // float and the last below-current-line float are still in aLine. if (!CheckPlaceholderInLine(this, aLine, GetLastFloat(aLine)) || !CheckPlaceholderInLine(this, aLine, aState.mBelowCurrentLineFloats.Tail())) { *aLineReflowStatus = LINE_REFLOW_REDO_NO_PULL; } #ifdef DEBUG VerifyLines(PR_TRUE); #endif } return NS_OK; } PRBool nsBlockFrame::ShouldJustifyLine(nsBlockReflowState& aState, line_iterator aLine) { while (++aLine != end_lines()) { // There is another line if (0 != aLine->GetChildCount()) { // If the next line is a block line then we must not justify // this line because it means that this line is the last in a // group of inline lines. return !aLine->IsBlock(); } // The next line is empty, try the next one } // XXX Not sure about this part // Try our next-in-flows lines to answer the question nsBlockFrame* nextInFlow = (nsBlockFrame*) GetNextInFlow(); while (nsnull != nextInFlow) { for (line_iterator line = nextInFlow->begin_lines(), line_end = nextInFlow->end_lines(); line != line_end; ++line) { if (0 != line->GetChildCount()) return !line->IsBlock(); } nextInFlow = (nsBlockFrame*) nextInFlow->GetNextInFlow(); } // This is the last line - so don't allow justification return PR_FALSE; } PRBool nsBlockFrame::PlaceLine(nsBlockReflowState& aState, nsLineLayout& aLineLayout, line_iterator aLine, PRBool* aKeepReflowGoing) { // Trim extra white-space from the line before placing the frames aLineLayout.TrimTrailingWhiteSpace(); // Vertically align the frames on this line. // // According to the CSS2 spec, section 12.6.1, the "marker" box // participates in the height calculation of the list-item box's // first line box. // // There are exactly two places a bullet can be placed: near the // first or second line. It's only placed on the second line in a // rare case: an empty first line followed by a second line that // contains a block (example:

  • \n

    ... ). // // For this code, only the first case is possible because this // method is used for placing a line of inline frames. If the rare // case is happening then the worst that will happen is that the // bullet frame will be reflowed twice. PRBool addedBullet = PR_FALSE; if (mBullet && HaveOutsideBullet() && (aLine == mLines.front()) && (!aLineLayout.IsZeroHeight() || (aLine == mLines.back()))) { nsHTMLReflowMetrics metrics; ReflowBullet(aState, metrics); aLineLayout.AddBulletFrame(mBullet, metrics); addedBullet = PR_TRUE; } aLineLayout.VerticalAlignLine(); #ifdef DEBUG { static nscoord lastHeight = 0; if (CRAZY_HEIGHT(aLine->mBounds.y)) { lastHeight = aLine->mBounds.y; if (abs(aLine->mBounds.y - lastHeight) > CRAZY_H/10) { nsFrame::ListTag(stdout); printf(": line=%p y=%d line.bounds.height=%d\n", NS_STATIC_CAST(void*, aLine.get()), aLine->mBounds.y, aLine->mBounds.height); } } else { lastHeight = 0; } } #endif // Only block frames horizontally align their children because // inline frames "shrink-wrap" around their children (therefore // there is no extra horizontal space). const nsStyleText* styleText = GetStyleText(); PRBool allowJustify = NS_STYLE_TEXT_ALIGN_JUSTIFY == styleText->mTextAlign && !aLineLayout.GetLineEndsInBR() && ShouldJustifyLine(aState, aLine); aLineLayout.HorizontalAlignFrames(aLine->mBounds, allowJustify); // XXX: not only bidi: right alignment can be broken after // RelativePositionFrames!!! // XXXldb Is something here considering relatively positioned frames at // other than their original positions? #ifdef IBMBIDI // XXXldb Why don't we do this earlier? if (aState.mPresContext->BidiEnabled()) { if (!aState.mPresContext->IsVisualMode()) { nsBidiPresUtils* bidiUtils = aState.mPresContext->GetBidiUtils(); if (bidiUtils && bidiUtils->IsSuccessful() ) { bidiUtils->ReorderFrames(aState.mPresContext, aState.mReflowState.rendContext, aLine->mFirstChild, aLine->GetChildCount()); } // bidiUtils } // not visual mode } // bidi enabled #endif // IBMBIDI nsRect combinedArea; aLineLayout.RelativePositionFrames(combinedArea); // XXXldb This returned width as -15, 2001-06-12, Bugzilla aLine->SetCombinedArea(combinedArea); if (addedBullet) { aLineLayout.RemoveBulletFrame(mBullet); } // Inline lines do not have margins themselves; however they are // impacted by prior block margins. If this line ends up having some // height then we zero out the previous bottom margin value that was // already applied to the line's starting Y coordinate. Otherwise we // leave it be so that the previous blocks bottom margin can be // collapsed with a block that follows. nscoord newY; if (!aLine->CachedIsEmpty()) { // This line has some height. Therefore the application of the // previous-bottom-margin should stick. aState.mPrevBottomMargin.Zero(); newY = aLine->mBounds.YMost(); } else { // Don't let the previous-bottom-margin value affect the newY // coordinate (it was applied in ReflowInlineFrames speculatively) // since the line is empty. // We already called |ShouldApplyTopMargin|, and if we applied it // then BRS_APPLYTOPMARGIN is set. nscoord dy = aState.GetFlag(BRS_APPLYTOPMARGIN) ? -aState.mPrevBottomMargin.get() : 0; newY = aState.mY + dy; aLine->SlideBy(dy); // XXXldb Do we really want to do this? } // See if the line fit. If it doesn't we need to push it. Our first // line will always fit. if (mLines.front() != aLine && newY > aState.mBottomEdge && aState.mBottomEdge != NS_UNCONSTRAINEDSIZE) { // Push this line and all of its children and anything else that // follows to our next-in-flow NS_ASSERTION((aState.mCurrentLine == aLine), "oops"); PushLines(aState, aLine.prev()); // Stop reflow and whack the reflow status if reflow hasn't // already been stopped. if (*aKeepReflowGoing) { aState.mReflowStatus |= NS_FRAME_NOT_COMPLETE; *aKeepReflowGoing = PR_FALSE; } return PR_TRUE; } // May be needed below PRBool wasAdjacentWIthTop = aState.IsAdjacentWithTop(); aState.mY = newY; // Add the already placed current-line floats to the line aLine->AppendFloats(aState.mCurrentLineFloats); // Any below current line floats to place? if (aState.mBelowCurrentLineFloats.NotEmpty()) { // Reflow the below-current-line floats, then add them to the // lines float list if there aren't any truncated floats. if (aState.PlaceBelowCurrentLineFloats(aState.mBelowCurrentLineFloats, wasAdjacentWIthTop)) { aLine->AppendFloats(aState.mBelowCurrentLineFloats); } else { // At least one float is truncated, so fix up any placeholders that got split and // push the line. XXX It may be better to put the float on the next line, but this // is not common enough to justify the complexity. Or maybe it is now... nsIFrame* lastPlaceholder = aState.mOverflowPlaceholders.LastChild(); PushTruncatedPlaceholderLine(aState, aLine, lastPlaceholder, *aKeepReflowGoing); } } // When a line has floats, factor them into the combined-area // computations. if (aLine->HasFloats()) { // Combine the float combined area (stored in aState) and the // value computed by the line layout code. nsRect lineCombinedArea(aLine->GetCombinedArea()); #ifdef NOISY_COMBINED_AREA ListTag(stdout); printf(": lineCA=%d,%d,%d,%d floatCA=%d,%d,%d,%d\n", lineCombinedArea.x, lineCombinedArea.y, lineCombinedArea.width, lineCombinedArea.height, aState.mFloatCombinedArea.x, aState.mFloatCombinedArea.y, aState.mFloatCombinedArea.width, aState.mFloatCombinedArea.height); #endif lineCombinedArea.UnionRect(aState.mFloatCombinedArea, lineCombinedArea); aLine->SetCombinedArea(lineCombinedArea); #ifdef NOISY_COMBINED_AREA printf(" ==> final lineCA=%d,%d,%d,%d\n", lineCombinedArea.x, lineCombinedArea.y, lineCombinedArea.width, lineCombinedArea.height); #endif } // Apply break-after clearing if necessary // This must stay in sync with |ReflowDirtyLines|. if (aLine->HasFloatBreakAfter()) { aState.mY = aState.ClearFloats(aState.mY, aLine->GetBreakTypeAfter()); } return PR_FALSE; } void nsBlockFrame::PushLines(nsBlockReflowState& aState, nsLineList::iterator aLineBefore) { nsLineList::iterator overBegin(aLineBefore.next()); // PushTruncatedPlaceholderLine sometimes pushes the first line. Ugh. PRBool firstLine = overBegin == begin_lines(); if (overBegin != end_lines()) { // Remove floats in the lines from mFloats nsFrameList floats; nsIFrame* tail = nsnull; CollectFloats(overBegin->mFirstChild, floats, &tail, PR_FALSE, PR_TRUE); if (floats.NotEmpty()) { // Push the floats onto the front of the overflow out-of-flows list nsFrameList oofs = GetOverflowOutOfFlows(); if (oofs.NotEmpty()) { floats.InsertFrames(nsnull, tail, oofs.FirstChild()); } SetOverflowOutOfFlows(floats); } // overflow lines can already exist in some cases, in particular, // when shrinkwrapping and we discover that the shrinkwap causes // the height of some child block to grow which creates additional // overflowing content. In such cases we must prepend the new // overflow to the existing overflow. nsLineList* overflowLines = RemoveOverflowLines(); if (!overflowLines) { // XXXldb use presshell arena! overflowLines = new nsLineList(); } if (overflowLines) { if (!overflowLines->empty()) { mLines.back()->LastChild()->SetNextSibling(overflowLines->front()->mFirstChild); } overflowLines->splice(overflowLines->begin(), mLines, overBegin, end_lines()); NS_ASSERTION(!overflowLines->empty(), "should not be empty"); // this takes ownership but it won't delete it immediately so we // can keep using it. SetOverflowLines(overflowLines); // Mark all the overflow lines dirty so that they get reflowed when // they are pulled up by our next-in-flow. // XXXldb Can this get called O(N) times making the whole thing O(N^2)? for (line_iterator line = overflowLines->begin(), line_end = overflowLines->end(); line != line_end; ++line) { line->MarkDirty(); line->MarkPreviousMarginDirty(); line->mBounds.SetRect(0, 0, 0, 0); if (line->HasFloats()) { line->FreeFloats(aState.mFloatCacheFreeList); } } } } // Break frame sibling list if (!firstLine) aLineBefore->LastChild()->SetNextSibling(nsnull); #ifdef DEBUG VerifyOverflowSituation(); #endif } /** * Call this when a frame will be pulled from the block's * next-in-flow into this frame. If it's a continuation placeholder, * it should not be here so we push it into our overflow placeholders * list. To avoid creating holes (e.g., the following block doesn't * have a placeholder but the block after it does) we also need to * pull all the following placeholders and put them in our overflow * placeholders list too. * * If it's a first-in-flow placeholder, or it contains one, then we * need to do this to the continuation placeholders. * * We return PR_TRUE if we removed the frame and it cannot be used. * If we return PR_FALSE then the frame *must* be pulled immediately. */ PRBool nsBlockFrame::HandleOverflowPlaceholdersForPulledFrame( nsBlockReflowState& aState, nsIFrame* aFrame) { if (nsGkAtoms::placeholderFrame != aFrame->GetType()) { // Descend into children that are not float containing blocks. // We should encounter only first-in-flow placeholders, so the // frame subtree rooted at aFrame should not change. if (!aFrame->IsFloatContainingBlock()) { for (nsIFrame* f = aFrame->GetFirstChild(nsnull); f; f = f->GetNextSibling()) { #ifdef DEBUG PRBool changed = #endif HandleOverflowPlaceholdersForPulledFrame(aState, f); NS_ASSERTION(!changed, "Shouldn't find any continuation placeholders inside inlines"); } } return PR_FALSE; } PRBool taken = PR_TRUE; nsIFrame* frame = aFrame; if (!aFrame->GetPrevInFlow()) { // First in flow frame. We only want to deal with its // next in flows, if there are any. taken = PR_FALSE; frame = frame->GetNextInFlow(); if (!frame) return PR_FALSE; } nsBlockFrame* parent = NS_STATIC_CAST(nsBlockFrame*, frame->GetParent()); // Remove aFrame and all its next in flows from their parents, but // don't destroy the frames. #ifdef DEBUG nsresult rv = #endif parent->DoRemoveFrame(frame, PR_FALSE); NS_ASSERTION(NS_SUCCEEDED(rv), "frame should be in parent's lists"); nsIFrame* lastOverflowPlace = aState.mOverflowPlaceholders.LastChild(); while (frame) { NS_ASSERTION(IsContinuationPlaceholder(frame), "Should only be dealing with continuation placeholders here"); parent = NS_STATIC_CAST(nsBlockFrame*, frame->GetParent()); ReparentFrame(frame, parent, this); // continuation placeholders are always direct children of a block nsIFrame* outOfFlow = nsPlaceholderFrame::GetRealFrameForPlaceholder(frame); if (!parent->mFloats.RemoveFrame(outOfFlow)) { nsAutoOOFFrameList oofs(parent); #ifdef DEBUG PRBool found = #endif oofs.mList.RemoveFrame(outOfFlow); NS_ASSERTION(found, "Must have the out of flow in some child list"); } ReparentFrame(outOfFlow, parent, this); aState.mOverflowPlaceholders.InsertFrames(nsnull, lastOverflowPlace, frame); // outOfFlow isn't inserted anywhere yet. Eventually the overflow // placeholders get put into the overflow lines, and at the same time we // insert the placeholders' out of flows into the overflow out-of-flows // list. lastOverflowPlace = frame; frame = frame->GetNextInFlow(); } return taken; } /** * Call this when a line will be pulled from the block's * next-in-flow's line. * * @return PR_TRUE we consumed the entire line, delete it and try again */ PRBool nsBlockFrame::HandleOverflowPlaceholdersOnPulledLine( nsBlockReflowState& aState, nsLineBox* aLine) { // First, see if it's a line of continuation placeholders. If it // is, remove one and retry. if (aLine->mFirstChild && IsContinuationPlaceholder(aLine->mFirstChild)) { PRBool taken = HandleOverflowPlaceholdersForPulledFrame(aState, aLine->mFirstChild); NS_ASSERTION(taken, "We must have removed that frame"); return PR_TRUE; } // OK, it's a normal line. Scan it for floats with continuations that // need to be taken care of. We won't need to change the line. PRInt32 n = aLine->GetChildCount(); for (nsIFrame* f = aLine->mFirstChild; n > 0; f = f->GetNextSibling(), --n) { #ifdef DEBUG PRBool taken = #endif HandleOverflowPlaceholdersForPulledFrame(aState, f); NS_ASSERTION(!taken, "Shouldn't be any continuation placeholders on this line"); } return PR_FALSE; } // The overflowLines property is stored as a pointer to a line list, // which must be deleted. However, the following functions all maintain // the invariant that the property is never set if the list is empty. PRBool nsBlockFrame::DrainOverflowLines(nsBlockReflowState& aState) { #ifdef DEBUG VerifyOverflowSituation(); #endif nsLineList* overflowLines = nsnull; nsLineList* ourOverflowLines = nsnull; // First grab the prev-in-flows overflow lines nsBlockFrame* prevBlock = (nsBlockFrame*) GetPrevInFlow(); if (prevBlock) { overflowLines = prevBlock->RemoveOverflowLines(); if (overflowLines) { NS_ASSERTION(! overflowLines->empty(), "overflow lines should never be set and empty"); // Make all the frames on the overflow line list mine nsIFrame* frame = overflowLines->front()->mFirstChild; while (nsnull != frame) { ReparentFrame(frame, prevBlock, this); // Get the next frame frame = frame->GetNextSibling(); } // make the overflow out-of-flow frames mine too nsAutoOOFFrameList oofs(prevBlock); if (oofs.mList.NotEmpty()) { for (nsIFrame* f = oofs.mList.FirstChild(); f; f = f->GetNextSibling()) { ReparentFrame(f, prevBlock, this); } mFloats.InsertFrames(nsnull, nsnull, oofs.mList.FirstChild()); oofs.mList.SetFrames(nsnull); } } // The lines on the overflow list have already been marked dirty and their // previous margins marked dirty also. } // Don't need to reparent frames in our own overflow lines/oofs, because they're // already ours. But we should put overflow floats back in mFloats. ourOverflowLines = RemoveOverflowLines(); if (ourOverflowLines) { nsAutoOOFFrameList oofs(this); if (oofs.mList.NotEmpty()) { // The overflow floats go after our regular floats mFloats.AppendFrames(nsnull, oofs.mList.FirstChild()); oofs.mList.SetFrames(nsnull); } } if (!overflowLines && !ourOverflowLines) { // nothing to do; always the case for non-constrained-height reflows return PR_FALSE; } NS_ASSERTION(aState.mOverflowPlaceholders.IsEmpty(), "Should have no overflow placeholders yet"); // HANDLING CONTINUATION PLACEHOLDERS (floats only at the moment, because // abs-pos frames don't have continuations) // // All continuation placeholders need to be moved to the front of // our line list. We also need to maintain the invariant that at // most one frame for a given piece of content is in our normal // child list, by pushing all but the first placeholder to our // overflow placeholders list. // // One problem we have to deal with is that some of these // continuation placeholders may have been donated to us by a // descendant block that was complete. We need to push them down to // a lower block if possible. // // We keep the lists ordered so that prev in flows come before their // next in flows. We do not worry about properly ordering the // placeholders for different content relative to each other until // the end. Then we sort them. // // When we're shuffling placeholders we also need to shuffle their out of // flows to match. As we put placeholders into keepPlaceholders, we unhook // their floats from mFloats. Later we put the floats back based on the // order of the placeholders. nsIFrame* lastOP = nsnull; nsFrameList keepPlaceholders; nsFrameList keepOutOfFlows; nsIFrame* lastKP = nsnull; nsIFrame* lastKOOF = nsnull; nsLineList* lineLists[3] = { overflowLines, &mLines, ourOverflowLines }; static const PRPackedBool searchFirstLinesOnly[3] = { PR_FALSE, PR_TRUE, PR_FALSE }; for (PRInt32 i = 0; i < 3; ++i) { nsLineList* ll = lineLists[i]; if (ll && !ll->empty()) { line_iterator iter = ll->begin(); line_iterator iter_end = ll->end(); nsIFrame* lastFrame = nsnull; while (iter != iter_end) { PRUint32 n = iter->GetChildCount(); if (n == 0 || !IsContinuationPlaceholder(iter->mFirstChild)) { if (lastFrame) { lastFrame->SetNextSibling(iter->mFirstChild); } if (searchFirstLinesOnly[i]) { break; } lastFrame = iter->LastChild(); ++iter; } else { nsLineBox* line = iter; iter = ll->erase(iter); nsIFrame* next; for (nsPlaceholderFrame* f = NS_STATIC_CAST(nsPlaceholderFrame*, line->mFirstChild); n > 0; --n, f = NS_STATIC_CAST(nsPlaceholderFrame*, next)) { if (!IsContinuationPlaceholder(f)) { NS_ASSERTION(IsContinuationPlaceholder(f), "Line frames should all be continuation placeholders"); } next = f->GetNextSibling(); nsIFrame* fpif = f->GetPrevInFlow(); nsIFrame* oof = f->GetOutOfFlowFrame(); // Take this out of mFloats for now. We may put it back later in // this function #ifdef DEBUG PRBool found = #endif mFloats.RemoveFrame(oof); NS_ASSERTION(found, "Float should have been put in our mFloats list"); PRBool isAncestor = nsLayoutUtils::IsProperAncestorFrame(this, fpif); if (isAncestor) { // oops. we already have a prev-in-flow for this // placeholder. We have to move this frame out of here. We // can put it in our overflow placeholders. aState.mOverflowPlaceholders.InsertFrame(nsnull, lastOP, f); // Let oof dangle for now, because placeholders in // mOverflowPlaceholders do not keep their floats in any child list lastOP = f; } else { if (fpif->GetParent() == prevBlock) { keepPlaceholders.InsertFrame(nsnull, lastKP, f); keepOutOfFlows.InsertFrame(nsnull, lastKOOF, oof); lastKP = f; lastKOOF = oof; } else { // Ok, now we're in the tough situation where some child // of prevBlock was complete and pushed its overflow // placeholders up to prevBlock's overflow. We might be // able to find a more appropriate parent for f somewhere // down in our descendants. NS_ASSERTION(nsLayoutUtils::IsProperAncestorFrame(prevBlock, fpif), "bad prev-in-flow ancestor chain"); // Find the first ancestor of f's prev-in-flow that has a next in flow // that can contain the float. // That next in flow should become f's parent. nsIFrame* fpAncestor; for (fpAncestor = fpif->GetParent(); !fpAncestor->GetNextInFlow() || !fpAncestor->IsFloatContainingBlock(); fpAncestor = fpAncestor->GetParent()) ; if (fpAncestor == prevBlock) { // We're still the best parent. keepPlaceholders.InsertFrame(nsnull, lastKP, f); keepOutOfFlows.InsertFrame(nsnull, lastKOOF, oof); lastKP = f; lastKOOF = oof; } else { // Just put it at the front of // fpAncestor->GetNextInFlow()'s lines. nsLineBox* newLine = aState.NewLineBox(f, 1, PR_FALSE); if (newLine) { nsBlockFrame* target = NS_STATIC_CAST(nsBlockFrame*, fpAncestor->GetNextInFlow()); if (!target->mLines.empty()) { f->SetNextSibling(target->mLines.front()->mFirstChild); } else { f->SetNextSibling(nsnull); } target->mLines.push_front(newLine); ReparentFrame(f, this, target); target->mFloats.InsertFrame(nsnull, nsnull, oof); ReparentFrame(oof, this, target); } } } } } aState.FreeLineBox(line); } } if (lastFrame) { lastFrame->SetNextSibling(nsnull); } } } // Now join the line lists into mLines if (overflowLines) { if (!overflowLines->empty()) { // Join the line lists if (! mLines.empty()) { // Remember to recompute the margins on the first line. This will // also recompute the correct deltaY if necessary. mLines.front()->MarkPreviousMarginDirty(); // Join the sibling lists together nsIFrame* lastFrame = overflowLines->back()->LastChild(); lastFrame->SetNextSibling(mLines.front()->mFirstChild); } // Place overflow lines at the front of our line list mLines.splice(mLines.begin(), *overflowLines); NS_ASSERTION(overflowLines->empty(), "splice should empty list"); } delete overflowLines; } if (ourOverflowLines) { if (!ourOverflowLines->empty()) { if (!mLines.empty()) { mLines.back()->LastChild()-> SetNextSibling(ourOverflowLines->front()->mFirstChild); } // append the overflow to mLines mLines.splice(mLines.end(), *ourOverflowLines); } delete ourOverflowLines; } // store the placeholders that we're keeping in our frame list if (keepPlaceholders.NotEmpty()) { keepPlaceholders.SortByContentOrder(); nsLineBox* newLine = aState.NewLineBox(keepPlaceholders.FirstChild(), keepPlaceholders.GetLength(), PR_FALSE); if (newLine) { if (!mLines.empty()) { keepPlaceholders.LastChild()->SetNextSibling(mLines.front()->mFirstChild); } mLines.push_front(newLine); } // Put the placeholders' out of flows into the float list keepOutOfFlows.SortByContentOrder(); mFloats.InsertFrames(nsnull, nsnull, keepOutOfFlows.FirstChild()); } return PR_TRUE; } nsLineList* nsBlockFrame::GetOverflowLines() const { if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_LINES)) { return nsnull; } nsLineList* lines = NS_STATIC_CAST(nsLineList*, GetProperty(nsGkAtoms::overflowLinesProperty)); NS_ASSERTION(lines && !lines->empty(), "value should always be stored and non-empty when state set"); return lines; } nsLineList* nsBlockFrame::RemoveOverflowLines() { if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_LINES)) { return nsnull; } nsLineList* lines = NS_STATIC_CAST(nsLineList*, UnsetProperty(nsGkAtoms::overflowLinesProperty)); NS_ASSERTION(lines && !lines->empty(), "value should always be stored and non-empty when state set"); RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_LINES); return lines; } // Destructor function for the overflowLines frame property static void DestroyOverflowLines(void* aFrame, nsIAtom* aPropertyName, void* aPropertyValue, void* aDtorData) { if (aPropertyValue) { nsLineList* lines = NS_STATIC_CAST(nsLineList*, aPropertyValue); nsPresContext *context = NS_STATIC_CAST(nsPresContext*, aDtorData); nsLineBox::DeleteLineList(context, *lines); delete lines; } } // This takes ownership of aOverflowLines. // XXX We should allocate overflowLines from presShell arena! nsresult nsBlockFrame::SetOverflowLines(nsLineList* aOverflowLines) { NS_ASSERTION(aOverflowLines, "null lines"); NS_ASSERTION(!aOverflowLines->empty(), "empty lines"); NS_ASSERTION(!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_LINES), "Overwriting existing overflow lines"); nsPresContext *presContext = PresContext(); nsresult rv = presContext->PropertyTable()-> SetProperty(this, nsGkAtoms::overflowLinesProperty, aOverflowLines, DestroyOverflowLines, presContext); // Verify that we didn't overwrite an existing overflow list NS_ASSERTION(rv != NS_PROPTABLE_PROP_OVERWRITTEN, "existing overflow list"); AddStateBits(NS_BLOCK_HAS_OVERFLOW_LINES); return rv; } nsFrameList nsBlockFrame::GetOverflowOutOfFlows() const { if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS)) { return nsFrameList(); } nsIFrame* result = NS_STATIC_CAST(nsIFrame*, GetProperty(nsGkAtoms::overflowOutOfFlowsProperty)); NS_ASSERTION(result, "value should always be non-empty when state set"); return nsFrameList(result); } // This takes ownership of the frames void nsBlockFrame::SetOverflowOutOfFlows(const nsFrameList& aList) { if (aList.IsEmpty()) { if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS)) { return; } nsIFrame* result = NS_STATIC_CAST(nsIFrame*, UnsetProperty(nsGkAtoms::overflowOutOfFlowsProperty)); NS_ASSERTION(result, "value should always be non-empty when state set"); RemoveStateBits(NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS); } else { SetProperty(nsGkAtoms::overflowOutOfFlowsProperty, aList.FirstChild(), nsnull); AddStateBits(NS_BLOCK_HAS_OVERFLOW_OUT_OF_FLOWS); } } nsFrameList* nsBlockFrame::GetOverflowPlaceholders() const { if (!(GetStateBits() & NS_BLOCK_HAS_OVERFLOW_PLACEHOLDERS)) { return nsnull; } nsFrameList* result = NS_STATIC_CAST(nsFrameList*, GetProperty(nsGkAtoms::overflowPlaceholdersProperty)); NS_ASSERTION(result, "value should always be non-empty when state set"); return result; } ////////////////////////////////////////////////////////////////////// // Frame list manipulation routines nsIFrame* nsBlockFrame::LastChild() { if (! mLines.empty()) { return mLines.back()->LastChild(); } return nsnull; } NS_IMETHODIMP nsBlockFrame::AppendFrames(nsIAtom* aListName, nsIFrame* aFrameList) { if (nsnull == aFrameList) { return NS_OK; } if (aListName) { if (mAbsoluteContainer.GetChildListName() == aListName) { return mAbsoluteContainer.AppendFrames(this, aListName, aFrameList); } else if (nsGkAtoms::floatList == aListName) { mFloats.AppendFrames(nsnull, aFrameList); return NS_OK; } else { NS_ERROR("unexpected child list"); return NS_ERROR_INVALID_ARG; } } // Find the proper last-child for where the append should go nsIFrame* lastKid = nsnull; nsLineBox* lastLine = mLines.empty() ? nsnull : mLines.back(); if (lastLine) { lastKid = lastLine->LastChild(); } // Add frames after the last child #ifdef NOISY_REFLOW_REASON ListTag(stdout); printf(": append "); nsFrame::ListTag(stdout, aFrameList); if (lastKid) { printf(" after "); nsFrame::ListTag(stdout, lastKid); } printf("\n"); #endif nsresult rv = AddFrames(aFrameList, lastKid); if (NS_SUCCEEDED(rv)) { PresContext()->PresShell()-> FrameNeedsReflow(this, nsIPresShell::eTreeChange, NS_FRAME_HAS_DIRTY_CHILDREN); // XXX sufficient? } return rv; } NS_IMETHODIMP nsBlockFrame::InsertFrames(nsIAtom* aListName, nsIFrame* aPrevFrame, nsIFrame* aFrameList) { NS_ASSERTION(!aPrevFrame || aPrevFrame->GetParent() == this, "inserting after sibling frame with different parent"); if (aListName) { if (mAbsoluteContainer.GetChildListName() == aListName) { return mAbsoluteContainer.InsertFrames(this, aListName, aPrevFrame, aFrameList); } else if (nsGkAtoms::floatList == aListName) { mFloats.InsertFrames(this, aPrevFrame, aFrameList); return NS_OK; } #ifdef IBMBIDI else if (nsGkAtoms::nextBidi == aListName) {} #endif // IBMBIDI else { NS_ERROR("unexpected child list"); return NS_ERROR_INVALID_ARG; } } #ifdef NOISY_REFLOW_REASON ListTag(stdout); printf(": insert "); nsFrame::ListTag(stdout, aFrameList); if (aPrevFrame) { printf(" after "); nsFrame::ListTag(stdout, aPrevFrame); } printf("\n"); #endif nsresult rv = AddFrames(aFrameList, aPrevFrame); #ifdef IBMBIDI if (aListName != nsGkAtoms::nextBidi) #endif // IBMBIDI if (NS_SUCCEEDED(rv)) { PresContext()->PresShell()-> FrameNeedsReflow(this, nsIPresShell::eTreeChange, NS_FRAME_HAS_DIRTY_CHILDREN); // XXX sufficient? } return rv; } static PRBool ShouldPutNextSiblingOnNewLine(nsIFrame* aLastFrame) { nsIAtom* type = aLastFrame->GetType(); if (type == nsGkAtoms::brFrame) return PR_TRUE; if (type == nsGkAtoms::textFrame) return aLastFrame->HasTerminalNewline() && aLastFrame->GetStyleText()->WhiteSpaceIsSignificant(); if (type == nsGkAtoms::placeholderFrame) return IsContinuationPlaceholder(aLastFrame); return PR_FALSE; } nsresult nsBlockFrame::AddFrames(nsIFrame* aFrameList, nsIFrame* aPrevSibling) { // Clear our line cursor, since our lines may change. ClearLineCursor(); if (nsnull == aFrameList) { return NS_OK; } // If we're inserting at the beginning of our list and we have an // inside bullet, insert after that bullet. if (!aPrevSibling && mBullet && !HaveOutsideBullet()) { NS_ASSERTION(!nsFrameList(aFrameList).ContainsFrame(mBullet), "Trying to make mBullet prev sibling to itself"); aPrevSibling = mBullet; } nsIPresShell *presShell = PresContext()->PresShell(); // Attempt to find the line that contains the previous sibling nsLineList::iterator prevSibLine = end_lines(); PRInt32 prevSiblingIndex = -1; if (aPrevSibling) { // XXX_perf This is technically O(N^2) in some cases, but by using // RFind instead of Find, we make it O(N) in the most common case, // which is appending content. // Find the line that contains the previous sibling if (! nsLineBox::RFindLineContaining(aPrevSibling, begin_lines(), prevSibLine, &prevSiblingIndex)) { // Note: defensive code! RFindLineContaining must not return // false in this case, so if it does... NS_NOTREACHED("prev sibling not in line list"); aPrevSibling = nsnull; prevSibLine = end_lines(); } } // Find the frame following aPrevSibling so that we can join up the // two lists of frames. nsIFrame* prevSiblingNextFrame = nsnull; if (aPrevSibling) { prevSiblingNextFrame = aPrevSibling->GetNextSibling(); // Split line containing aPrevSibling in two if the insertion // point is somewhere in the middle of the line. PRInt32 rem = prevSibLine->GetChildCount() - prevSiblingIndex - 1; if (rem) { // Split the line in two where the frame(s) are being inserted. nsLineBox* line = NS_NewLineBox(presShell, prevSiblingNextFrame, rem, PR_FALSE); if (!line) { return NS_ERROR_OUT_OF_MEMORY; } mLines.after_insert(prevSibLine, line); prevSibLine->SetChildCount(prevSibLine->GetChildCount() - rem); prevSibLine->MarkDirty(); } // Now (partially) join the sibling lists together aPrevSibling->SetNextSibling(aFrameList); } else if (! mLines.empty()) { prevSiblingNextFrame = mLines.front()->mFirstChild; } // Walk through the new frames being added and update the line data // structures to fit. nsIFrame* newFrame = aFrameList; while (newFrame) { PRBool isBlock = nsLineLayout::TreatFrameAsBlock(newFrame); // If the frame is a block frame, or if there is no previous line or if the // previous line is a block line we need to make a new line. We also make // a new line, as an optimization, in the three cases we know we'll need it: // if the previous line ended with a
    , if it has significant whitespace and // ended in a newline, or if it contains continuation placeholders. if (isBlock || prevSibLine == end_lines() || prevSibLine->IsBlock() || (aPrevSibling && ShouldPutNextSiblingOnNewLine(aPrevSibling))) { // Create a new line for the frame and add its line to the line // list. nsLineBox* line = NS_NewLineBox(presShell, newFrame, 1, isBlock); if (!line) { return NS_ERROR_OUT_OF_MEMORY; } if (prevSibLine != end_lines()) { // Append new line after prevSibLine mLines.after_insert(prevSibLine, line); ++prevSibLine; } else { // New line is going before the other lines mLines.push_front(line); prevSibLine = begin_lines(); } } else { prevSibLine->SetChildCount(prevSibLine->GetChildCount() + 1); prevSibLine->MarkDirty(); } aPrevSibling = newFrame; newFrame = newFrame->GetNextSibling(); } if (prevSiblingNextFrame) { // Connect the last new frame to the remainder of the sibling list aPrevSibling->SetNextSibling(prevSiblingNextFrame); } #ifdef DEBUG VerifyLines(PR_TRUE); #endif return NS_OK; } nsBlockFrame::line_iterator nsBlockFrame::RemoveFloat(nsIFrame* aFloat) { // Find which line contains the float, so we can update // the float cache. line_iterator line = begin_lines(), line_end = end_lines(); for ( ; line != line_end; ++line) { if (line->IsInline() && line->RemoveFloat(aFloat)) { break; } } // Unlink the placeholder *after* we searched the lines, because // the line search uses the placeholder relationship. nsFrameManager* fm = PresContext()->GetPresShell()->FrameManager(); nsPlaceholderFrame* placeholder = fm->GetPlaceholderFrameFor(aFloat); if (placeholder) { fm->UnregisterPlaceholderFrame(placeholder); placeholder->SetOutOfFlowFrame(nsnull); } // Try to destroy if it's in mFloats. if (mFloats.DestroyFrame(aFloat)) { return line; } // Try our overflow list { nsAutoOOFFrameList oofs(this); if (oofs.mList.DestroyFrame(aFloat)) { return line_end; } } // If this is during reflow, it could be the out-of-flow frame for a // placeholder in our block reflow state's mOverflowPlaceholders. But that's // OK; it's not part of any child list, so we can just go ahead and delete it. aFloat->Destroy(); return line_end; } static void MarkAllDescendantLinesDirty(nsBlockFrame* aBlock) { nsLineList::iterator line = aBlock->begin_lines(); nsLineList::iterator endLine = aBlock->end_lines(); while (line != endLine) { if (line->IsBlock()) { nsIFrame* f = line->mFirstChild; void* bf; if (NS_SUCCEEDED(f->QueryInterface(kBlockFrameCID, &bf))) { MarkAllDescendantLinesDirty(NS_STATIC_CAST(nsBlockFrame*, f)); } } line->MarkDirty(); ++line; } } static void MarkSameSpaceManagerLinesDirty(nsBlockFrame* aBlock) { nsBlockFrame* blockWithSpaceMgr = aBlock; while (!(blockWithSpaceMgr->GetStateBits() & NS_BLOCK_SPACE_MGR)) { void* bf; if (NS_FAILED(blockWithSpaceMgr->GetParent()-> QueryInterface(kBlockFrameCID, &bf))) { break; } blockWithSpaceMgr = NS_STATIC_CAST(nsBlockFrame*, blockWithSpaceMgr->GetParent()); } // Mark every line at and below the line where the float was // dirty, and mark their lines dirty too. We could probably do // something more efficient --- e.g., just dirty the lines that intersect // the float vertically. MarkAllDescendantLinesDirty(blockWithSpaceMgr); } /** * Returns PR_TRUE if aFrame is a block that has one or more float children. */ static PRBool BlockHasAnyFloats(nsIFrame* aFrame) { void* bf; if (NS_FAILED(aFrame->QueryInterface(kBlockFrameCID, &bf))) return PR_FALSE; nsBlockFrame* block = NS_STATIC_CAST(nsBlockFrame*, aFrame); if (block->GetFirstChild(nsGkAtoms::floatList)) return PR_TRUE; nsLineList::iterator line = block->begin_lines(); nsLineList::iterator endLine = block->end_lines(); while (line != endLine) { if (line->IsBlock() && BlockHasAnyFloats(line->mFirstChild)) return PR_TRUE; ++line; } return PR_FALSE; } NS_IMETHODIMP nsBlockFrame::RemoveFrame(nsIAtom* aListName, nsIFrame* aOldFrame) { nsresult rv = NS_OK; #ifdef NOISY_REFLOW_REASON ListTag(stdout); printf(": remove "); nsFrame::ListTag(stdout, aOldFrame); printf("\n"); #endif if (nsnull == aListName) { PRBool hasFloats = BlockHasAnyFloats(aOldFrame); rv = DoRemoveFrame(aOldFrame, PR_TRUE, PR_FALSE); if (hasFloats) { MarkSameSpaceManagerLinesDirty(this); } } else if (mAbsoluteContainer.GetChildListName() == aListName) { return mAbsoluteContainer.RemoveFrame(this, aListName, aOldFrame); } else if (nsGkAtoms::floatList == aListName) { RemoveFloat(aOldFrame); MarkSameSpaceManagerLinesDirty(this); } #ifdef IBMBIDI else if (nsGkAtoms::nextBidi == aListName) { // Skip the call to |FrameNeedsReflow| below by returning now. return DoRemoveFrame(aOldFrame, PR_TRUE, PR_FALSE); } #endif // IBMBIDI else { NS_ERROR("unexpected child list"); rv = NS_ERROR_INVALID_ARG; } if (NS_SUCCEEDED(rv)) { PresContext()->PresShell()-> FrameNeedsReflow(this, nsIPresShell::eTreeChange, NS_FRAME_HAS_DIRTY_CHILDREN); // XXX sufficient? } return rv; } void nsBlockFrame::DoRemoveOutOfFlowFrame(nsIFrame* aFrame) { // First remove aFrame's next in flow nsIFrame* nextInFlow = aFrame->GetNextInFlow(); if (nextInFlow) { nsBlockFrame::DoRemoveOutOfFlowFrame(nextInFlow); } // Now remove aFrame const nsStyleDisplay* display = aFrame->GetStyleDisplay(); // The containing block is always the parent of aFrame. nsBlockFrame* block = (nsBlockFrame*)aFrame->GetParent(); // Remove aFrame from the appropriate list. if (display->IsAbsolutelyPositioned()) { block->mAbsoluteContainer.RemoveFrame(block, block->mAbsoluteContainer.GetChildListName(), aFrame); aFrame->Destroy(); } else { // This also destroys the frame. block->RemoveFloat(aFrame); } } /** * This helps us iterate over the list of all normal + overflow lines */ void nsBlockFrame::TryAllLines(nsLineList::iterator* aIterator, nsLineList::iterator* aEndIterator, PRBool* aInOverflowLines) { if (*aIterator == *aEndIterator) { if (!*aInOverflowLines) { *aInOverflowLines = PR_TRUE; // Try the overflow lines nsLineList* overflowLines = GetOverflowLines(); if (overflowLines) { *aIterator = overflowLines->begin(); *aEndIterator = overflowLines->end(); } } } } static nsresult RemoveBlockChild(nsIFrame* aFrame, PRBool aDestroyFrames) { if (!aFrame) return NS_OK; nsBlockFrame* nextBlock = NS_STATIC_CAST(nsBlockFrame*, aFrame->GetParent()); NS_ASSERTION(nextBlock->GetType() == nsGkAtoms::blockFrame || nextBlock->GetType() == nsGkAtoms::areaFrame, "Our child's continuation's parent is not a block?"); return nextBlock->DoRemoveFrame(aFrame, aDestroyFrames); } // This function removes aDeletedFrame and all its continuations. It // is optimized for deleting a whole series of frames. The easy // implementation would invoke itself recursively on // aDeletedFrame->GetNextContinuation, then locate the line containing // aDeletedFrame and remove aDeletedFrame from that line. But here we // start by locating aDeletedFrame and then scanning from that point // on looking for continuations. nsresult nsBlockFrame::DoRemoveFrame(nsIFrame* aDeletedFrame, PRBool aDestroyFrames, PRBool aRemoveOnlyFluidContinuations) { // Clear our line cursor, since our lines may change. ClearLineCursor(); if (aDeletedFrame->GetStateBits() & NS_FRAME_OUT_OF_FLOW) { NS_ASSERTION(aDestroyFrames, "We can't not destroy out of flows"); DoRemoveOutOfFlowFrame(aDeletedFrame); return NS_OK; } nsPresContext* presContext = PresContext(); nsIPresShell* presShell = presContext->PresShell(); PRBool isPlaceholder = nsGkAtoms::placeholderFrame == aDeletedFrame->GetType(); if (isPlaceholder) { nsFrameList* overflowPlaceholders = GetOverflowPlaceholders(); if (overflowPlaceholders && overflowPlaceholders->RemoveFrame(aDeletedFrame)) { nsIFrame* nif = aDeletedFrame->GetNextInFlow(); if (aDestroyFrames) { aDeletedFrame->Destroy(); } else { aDeletedFrame->SetNextSibling(nsnull); } return RemoveBlockChild(nif, aDestroyFrames); } } // Find the line and the previous sibling that contains // deletedFrame; we also find the pointer to the line. nsLineList::iterator line = mLines.begin(), line_end = mLines.end(); PRBool searchingOverflowList = PR_FALSE; nsIFrame* prevSibling = nsnull; // Make sure we look in the overflow lines even if the normal line // list is empty TryAllLines(&line, &line_end, &searchingOverflowList); while (line != line_end) { nsIFrame* frame = line->mFirstChild; PRInt32 n = line->GetChildCount(); while (--n >= 0) { if (frame == aDeletedFrame) { goto found_frame; } prevSibling = frame; frame = frame->GetNextSibling(); } ++line; TryAllLines(&line, &line_end, &searchingOverflowList); } found_frame:; if (line == line_end) { NS_ERROR("can't find deleted frame in lines"); return NS_ERROR_FAILURE; } if (prevSibling && !prevSibling->GetNextSibling()) { // We must have found the first frame in the overflow line list. So // there is no prevSibling prevSibling = nsnull; } NS_ASSERTION(!prevSibling || prevSibling->GetNextSibling() == aDeletedFrame, "bad prevSibling"); while ((line != line_end) && (nsnull != aDeletedFrame)) { NS_ASSERTION(this == aDeletedFrame->GetParent(), "messed up delete code"); NS_ASSERTION(line->Contains(aDeletedFrame), "frame not in line"); // If the frame being deleted is the last one on the line then // optimize away the line->Contains(next-in-flow) call below. PRBool isLastFrameOnLine = (1 == line->GetChildCount() || line->LastChild() == aDeletedFrame); // Remove aDeletedFrame from the line nsIFrame* nextFrame = aDeletedFrame->GetNextSibling(); if (line->mFirstChild == aDeletedFrame) { // We should be setting this to null if aDeletedFrame // is the only frame on the line. HOWEVER in that case // we will be removing the line anyway, see below. line->mFirstChild = nextFrame; } // Hmm, this won't do anything if we're removing a frame in the first // overflow line... Hopefully doesn't matter --line; if (line != line_end && !line->IsBlock()) { // Since we just removed a frame that follows some inline // frames, we need to reflow the previous line. line->MarkDirty(); } ++line; // Take aDeletedFrame out of the sibling list. Note that // prevSibling will only be nsnull when we are deleting the very // first frame in the main or overflow list. if (prevSibling) { prevSibling->SetNextSibling(nextFrame); } // Update the child count of the line to be accurate PRInt32 lineChildCount = line->GetChildCount(); lineChildCount--; line->SetChildCount(lineChildCount); // Destroy frame; capture its next continuation first in case we need // to destroy that too. nsIFrame* deletedNextContinuation = aRemoveOnlyFluidContinuations ? aDeletedFrame->GetNextInFlow() : aDeletedFrame->GetNextContinuation(); #ifdef NOISY_REMOVE_FRAME printf("DoRemoveFrame: %s line=%p frame=", searchingOverflowList?"overflow":"normal", line.get()); nsFrame::ListTag(stdout, aDeletedFrame); printf(" prevSibling=%p deletedNextContinuation=%p\n", prevSibling, deletedNextContinuation); #endif if (aDestroyFrames) { aDeletedFrame->Destroy(); } else { aDeletedFrame->SetNextSibling(nsnull); } aDeletedFrame = deletedNextContinuation; PRBool haveAdvancedToNextLine = PR_FALSE; // If line is empty, remove it now. if (0 == lineChildCount) { #ifdef NOISY_REMOVE_FRAME printf("DoRemoveFrame: %s line=%p became empty so it will be removed\n", searchingOverflowList?"overflow":"normal", line.get()); #endif nsLineBox *cur = line; if (!searchingOverflowList) { line = mLines.erase(line); // Invalidate the space taken up by the line. // XXX We need to do this if we're removing a frame as a result of // a call to RemoveFrame(), but we may not need to do this in all // cases... nsRect lineCombinedArea(cur->GetCombinedArea()); #ifdef NOISY_BLOCK_INVALIDATE printf("%p invalidate 10 (%d, %d, %d, %d)\n", this, lineCombinedArea.x, lineCombinedArea.y, lineCombinedArea.width, lineCombinedArea.height); #endif Invalidate(lineCombinedArea); } else { nsLineList* lineList = RemoveOverflowLines(); line = lineList->erase(line); if (!lineList->empty()) { SetOverflowLines(lineList); } } cur->Destroy(presShell); // If we're removing a line, ReflowDirtyLines isn't going to // know that it needs to slide lines unless something is marked // dirty. So mark the previous margin of the next line dirty if // there is one. if (line != line_end) { line->MarkPreviousMarginDirty(); } haveAdvancedToNextLine = PR_TRUE; } else { // Make the line that just lost a frame dirty, and advance to // the next line. if (!deletedNextContinuation || isLastFrameOnLine || !line->Contains(deletedNextContinuation)) { line->MarkDirty(); ++line; haveAdvancedToNextLine = PR_TRUE; } } if (deletedNextContinuation) { // Continuations for placeholder frames don't always appear in // consecutive lines. So for placeholders, just continue the slow easy way. if (isPlaceholder) { return RemoveBlockChild(deletedNextContinuation, aDestroyFrames); } // See if we should keep looking in the current flow's line list. if (deletedNextContinuation->GetParent() != this) { // The deceased frames continuation is not a child of the // current block. So break out of the loop so that we advance // to the next parent. break; } // If we advanced to the next line then check if we should switch to the // overflow line list. if (haveAdvancedToNextLine) { if (line != line_end && !searchingOverflowList && !line->Contains(deletedNextContinuation)) { // We have advanced to the next *normal* line but the next-in-flow // is not there - force a switch to the overflow line list. line = line_end; } PRBool wasSearchingOverflowList = searchingOverflowList; TryAllLines(&line, &line_end, &searchingOverflowList); if (NS_UNLIKELY(searchingOverflowList && !wasSearchingOverflowList && prevSibling)) { // We switched to the overflow line list and we have a prev sibling // (in the main list), in this case we don't want to pick up any // sibling list from the deceased frames (bug 344557). prevSibling->SetNextSibling(nsnull); prevSibling = nsnull; } #ifdef NOISY_REMOVE_FRAME printf("DoRemoveFrame: now on %s line=%p prevSibling=%p\n", searchingOverflowList?"overflow":"normal", line.get(), prevSibling); #endif } } } #ifdef DEBUG VerifyLines(PR_TRUE); #endif // Advance to next flow block if the frame has more continuations return RemoveBlockChild(aDeletedFrame, aDestroyFrames); } void nsBlockFrame::DeleteNextInFlowChild(nsPresContext* aPresContext, nsIFrame* aNextInFlow) { nsIFrame* prevInFlow = aNextInFlow->GetPrevInFlow(); NS_PRECONDITION(prevInFlow, "bad next-in-flow"); NS_PRECONDITION(IsChild(aNextInFlow), "bad geometric parent"); DoRemoveFrame(aNextInFlow); } //////////////////////////////////////////////////////////////////////// // Float support nsresult nsBlockFrame::ReflowFloat(nsBlockReflowState& aState, nsPlaceholderFrame* aPlaceholder, nsMargin& aFloatMargin, nsReflowStatus& aReflowStatus) { // Reflow the float. nsIFrame* floatFrame = aPlaceholder->GetOutOfFlowFrame(); aReflowStatus = NS_FRAME_COMPLETE; #ifdef NOISY_FLOAT printf("Reflow Float %p in parent %p, availSpace(%d,%d,%d,%d)\n", aPlaceholder->GetOutOfFlowFrame(), this, aState.mAvailSpaceRect.x, aState.mAvailSpaceRect.y, aState.mAvailSpaceRect.width, aState.mAvailSpaceRect.height ); #endif // Compute the available width. By default, assume the width of the // containing block. nscoord availWidth; const nsStyleDisplay* floatDisplay = floatFrame->GetStyleDisplay(); if (NS_STYLE_DISPLAY_TABLE != floatDisplay->mDisplay || eCompatibility_NavQuirks != aState.mPresContext->CompatibilityMode() ) { availWidth = aState.mContentArea.width; } else { // This quirk matches the one in nsBlockReflowState::FlowAndPlaceFloat // give tables only the available space // if they can shrink we may not be constrained to place // them in the next line availWidth = aState.mAvailSpaceRect.width; // round down to twips per pixel so that we fit // needed when prev. float has procentage width // (maybe is a table flaw that makes table chose to round up // but I don't want to change that, too risky) nscoord twp = nsPresContext::CSSPixelsToAppUnits(1); availWidth -= availWidth % twp; } // aState.mY is relative to the border-top, make it relative to the content-top nscoord contentYOffset = aState.mY - aState.BorderPadding().top; nscoord availHeight = NS_UNCONSTRAINEDSIZE == aState.mContentArea.height ? NS_UNCONSTRAINEDSIZE : PR_MAX(0, aState.mContentArea.height - contentYOffset); nsRect availSpace(aState.BorderPadding().left, aState.BorderPadding().top, availWidth, availHeight); // construct the html reflow state for the float. ReflowBlock will // initialize it. nsHTMLReflowState floatRS(aState.mPresContext, aState.mReflowState, floatFrame, nsSize(availSpace.width, availSpace.height)); // Setup a block reflow state to reflow the float. nsBlockReflowContext brc(aState.mPresContext, aState.mReflowState); // Reflow the float PRBool isAdjacentWithTop = aState.IsAdjacentWithTop(); nsIFrame* clearanceFrame = nsnull; nsresult rv; do { nsCollapsingMargin margin; PRBool mayNeedRetry = PR_FALSE; floatRS.mDiscoveredClearance = nsnull; // Only first in flow gets a top margin. if (!floatFrame->GetPrevInFlow()) { nsBlockReflowContext::ComputeCollapsedTopMargin(floatRS, &margin, clearanceFrame, &mayNeedRetry); if (mayNeedRetry && !clearanceFrame) { floatRS.mDiscoveredClearance = &clearanceFrame; // We don't need to push the space manager state because the the block has its own // space manager that will be destroyed and recreated } } nsMargin offsets; // Don't bother returning this to the caller; it's stored // on a frame property anyawy rv = brc.ReflowBlock(availSpace, PR_TRUE, margin, 0, isAdjacentWithTop, offsets, floatRS, aReflowStatus); } while (NS_SUCCEEDED(rv) && clearanceFrame); // An incomplete reflow status means we should split the float // if the height is constrained (bug 145305). if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus) && (NS_UNCONSTRAINEDSIZE == availHeight)) aReflowStatus = NS_FRAME_COMPLETE; if (NS_FRAME_IS_COMPLETE(aReflowStatus)) { // Float is now complete, so delete the placeholder's next in // flows, if any; their floats (which are this float's continuations) // have already been deleted. // XXX won't this be done later in nsLineLayout::ReflowFrame anyway?? nsIFrame* nextInFlow = aPlaceholder->GetNextInFlow(); if (nextInFlow) { NS_STATIC_CAST(nsHTMLContainerFrame*, nextInFlow->GetParent()) ->DeleteNextInFlowChild(aState.mPresContext, nextInFlow); // that takes care of all subsequent nextinflows too } } if (aReflowStatus & NS_FRAME_REFLOW_NEXTINFLOW) { aState.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW; } if (floatFrame->GetType() == nsGkAtoms::letterFrame) { // We never split floating first letters; an incomplete state for // such frames simply means that there is more content to be // reflowed on the line. if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus)) aReflowStatus = NS_FRAME_COMPLETE; } if (NS_FAILED(rv)) { return rv; } // Capture the margin information for the caller const nsMargin& m = brc.GetMargin(); aFloatMargin.top = brc.GetTopMargin(); aFloatMargin.right = m.right; // Only last in flows get a bottom margin if (NS_FRAME_IS_COMPLETE(aReflowStatus)) { brc.GetCarriedOutBottomMargin().Include(m.bottom); } aFloatMargin.bottom = brc.GetCarriedOutBottomMargin().get(); aFloatMargin.left = m.left; const nsHTMLReflowMetrics& metrics = brc.GetMetrics(); // Set the rect, make sure the view is properly sized and positioned, // and tell the frame we're done reflowing it // XXXldb This seems like the wrong place to be doing this -- shouldn't // we be doing this in nsBlockReflowState::FlowAndPlaceFloat after // we've positioned the float, and shouldn't we be doing the equivalent // of |::PlaceFrameView| here? floatFrame->SetSize(nsSize(metrics.width, metrics.height)); if (floatFrame->HasView()) { nsContainerFrame::SyncFrameViewAfterReflow(aState.mPresContext, floatFrame, floatFrame->GetView(), &metrics.mOverflowArea, NS_FRAME_NO_MOVE_VIEW); } // Pass floatRS so the frame hierarchy can be used (redoFloatRS has the same hierarchy) floatFrame->DidReflow(aState.mPresContext, &floatRS, NS_FRAME_REFLOW_FINISHED); #ifdef NOISY_FLOAT printf("end ReflowFloat %p, sized to %d,%d\n", floatFrame, metrics.width, metrics.height); #endif // If the placeholder was continued and its first-in-flow was followed by a //
    , then cache the
    's break type in aState.mFloatBreakType so that // the next frame after the placeholder can combine that break type with its own nsIFrame* prevPlaceholder = aPlaceholder->GetPrevInFlow(); if (prevPlaceholder) { // the break occurs only after the last continued placeholder PRBool lastPlaceholder = PR_TRUE; nsIFrame* next = aPlaceholder->GetNextSibling(); if (next) { if (nsGkAtoms::placeholderFrame == next->GetType()) { lastPlaceholder = PR_FALSE; } } if (lastPlaceholder) { // get the containing block of prevPlaceholder which is our prev-in-flow if (GetPrevInFlow()) { // get the break type of the last line in mPrevInFlow line_iterator endLine = --((nsBlockFrame*)GetPrevInFlow())->end_lines(); if (endLine->HasFloatBreakAfter()) { aState.mFloatBreakType = endLine->GetBreakTypeAfter(); } } else NS_ASSERTION(PR_FALSE, "no prev in flow"); } } return NS_OK; } ////////////////////////////////////////////////////////////////////// // Painting, event handling PRIntn nsBlockFrame::GetSkipSides() const { PRIntn skip = 0; if (nsnull != GetPrevInFlow()) { skip |= 1 << NS_SIDE_TOP; } if (nsnull != GetNextInFlow()) { skip |= 1 << NS_SIDE_BOTTOM; } return skip; } #ifdef DEBUG static void ComputeCombinedArea(nsLineList& aLines, nscoord aWidth, nscoord aHeight, nsRect& aResult) { nscoord xa = 0, ya = 0, xb = aWidth, yb = aHeight; for (nsLineList::iterator line = aLines.begin(), line_end = aLines.end(); line != line_end; ++line) { // Compute min and max x/y values for the reflowed frame's // combined areas nsRect lineCombinedArea(line->GetCombinedArea()); nscoord x = lineCombinedArea.x; nscoord y = lineCombinedArea.y; nscoord xmost = x + lineCombinedArea.width; nscoord ymost = y + lineCombinedArea.height; if (x < xa) { xa = x; } if (xmost > xb) { xb = xmost; } if (y < ya) { ya = y; } if (ymost > yb) { yb = ymost; } } aResult.x = xa; aResult.y = ya; aResult.width = xb - xa; aResult.height = yb - ya; } #endif PRBool nsBlockFrame::IsVisibleInSelection(nsISelection* aSelection) { nsCOMPtr html(do_QueryInterface(mContent)); nsCOMPtr body(do_QueryInterface(mContent)); if (html || body) return PR_TRUE; nsCOMPtr node(do_QueryInterface(mContent)); PRBool visible; nsresult rv = aSelection->ContainsNode(node, PR_TRUE, &visible); return NS_SUCCEEDED(rv) && visible; } /* virtual */ void nsBlockFrame::PaintTextDecorationLine(nsIRenderingContext& aRenderingContext, nsPoint aPt, nsLineBox* aLine, nscolor aColor, nscoord aOffset, nscoord aAscent, nscoord aSize) { aRenderingContext.SetColor(aColor); NS_ASSERTION(!aLine->IsBlock(), "Why did we ask for decorations on a block?"); nscoord start = aLine->mBounds.x; nscoord width = aLine->mBounds.width; if (aLine == begin_lines().get()) { // Adjust for the text-indent. See similar code in // nsLineLayout::BeginLineReflow. nscoord indent = 0; const nsStyleText* styleText = GetStyleText(); nsStyleUnit unit = styleText->mTextIndent.GetUnit(); if (eStyleUnit_Coord == unit) { indent = styleText->mTextIndent.GetCoordValue(); } else if (eStyleUnit_Percent == unit) { // It's a percentage of the containing block width. nsIFrame* containingBlock = nsHTMLReflowState::GetContainingBlockFor(this); NS_ASSERTION(containingBlock, "Must have containing block!"); indent = nscoord(styleText->mTextIndent.GetPercentValue() * containingBlock->GetContentRect().width); } // Adjust the start position and the width of the decoration by the // value of the indent. Note that indent can be negative; that's OK. // It'll just increase the width (which can also happen to be // negative!). start += indent; width -= indent; } // Only paint if we have a positive width if (width > 0) { aRenderingContext.FillRect(start + aPt.x, aLine->mBounds.y + aLine->GetAscent() - aOffset + aPt.y, width, aSize); } } #ifdef DEBUG static void DebugOutputDrawLine(PRInt32 aDepth, nsLineBox* aLine, PRBool aDrawn) { if (nsBlockFrame::gNoisyDamageRepair) { nsFrame::IndentBy(stdout, aDepth+1); nsRect lineArea = aLine->GetCombinedArea(); printf("%s line=%p bounds=%d,%d,%d,%d ca=%d,%d,%d,%d\n", aDrawn ? "draw" : "skip", NS_STATIC_CAST(void*, aLine), aLine->mBounds.x, aLine->mBounds.y, aLine->mBounds.width, aLine->mBounds.height, lineArea.x, lineArea.y, lineArea.width, lineArea.height); } } #endif static nsresult DisplayLine(nsDisplayListBuilder* aBuilder, const nsRect& aLineArea, const nsRect& aDirtyRect, nsBlockFrame::line_iterator& aLine, PRInt32 aDepth, PRInt32& aDrawnLines, const nsDisplayListSet& aLists, nsBlockFrame* aFrame) { // If the line's combined area (which includes child frames that // stick outside of the line's bounding box or our bounding box) // intersects the dirty rect then paint the line. PRBool intersect = aLineArea.Intersects(aDirtyRect); #ifdef DEBUG if (nsBlockFrame::gLamePaintMetrics) { aDrawnLines++; } DebugOutputDrawLine(aDepth, aLine.get(), intersect); #endif // The line might contain a placeholder for a visible out-of-flow, in which // case we need to descend into it. If there is such a placeholder, we will // have NS_FRAME_FORCE_DISPLAY_LIST_DESCEND_INTO set. if (!intersect && !(aFrame->GetStateBits() & NS_FRAME_FORCE_DISPLAY_LIST_DESCEND_INTO)) return NS_OK; nsresult rv; nsDisplayList aboveTextDecorations; PRBool lineInline = aLine->IsInline(); if (lineInline) { // Display the text-decoration for the hypothetical anonymous inline box // that wraps these inlines rv = aFrame->DisplayTextDecorations(aBuilder, aLists.Content(), &aboveTextDecorations, aLine); NS_ENSURE_SUCCESS(rv, rv); } // Block-level child backgrounds go on the blockBorderBackgrounds list ... // Inline-level child backgrounds go on the regular child content list. nsDisplayListSet childLists(aLists, lineInline ? aLists.Content() : aLists.BlockBorderBackgrounds()); nsIFrame* kid = aLine->mFirstChild; PRInt32 n = aLine->GetChildCount(); while (--n >= 0) { rv = aFrame->BuildDisplayListForChild(aBuilder, kid, aDirtyRect, childLists, lineInline ? nsIFrame::DISPLAY_CHILD_INLINE : 0); NS_ENSURE_SUCCESS(rv, rv); kid = kid->GetNextSibling(); } aLists.Content()->AppendToTop(&aboveTextDecorations); return NS_OK; } NS_IMETHODIMP nsBlockFrame::BuildDisplayList(nsDisplayListBuilder* aBuilder, const nsRect& aDirtyRect, const nsDisplayListSet& aLists) { PRInt32 drawnLines; // Will only be used if set (gLamePaintMetrics). PRInt32 depth = 0; #ifdef DEBUG if (gNoisyDamageRepair) { depth = GetDepth(); nsRect ca; ::ComputeCombinedArea(mLines, mRect.width, mRect.height, ca); nsFrame::IndentBy(stdout, depth); ListTag(stdout); printf(": bounds=%d,%d,%d,%d dirty(absolute)=%d,%d,%d,%d ca=%d,%d,%d,%d\n", mRect.x, mRect.y, mRect.width, mRect.height, aDirtyRect.x, aDirtyRect.y, aDirtyRect.width, aDirtyRect.height, ca.x, ca.y, ca.width, ca.height); } PRTime start = LL_ZERO; // Initialize these variables to silence the compiler. if (gLamePaintMetrics) { start = PR_Now(); drawnLines = 0; } #endif DisplayBorderBackgroundOutline(aBuilder, aLists); aBuilder->MarkFramesForDisplayList(this, mFloats.FirstChild(), aDirtyRect); aBuilder->MarkFramesForDisplayList(this, mAbsoluteContainer.GetFirstChild(), aDirtyRect); // Don't use the line cursor if we might have a descendant placeholder ... // it might skip lines that contain placeholders but don't themselves // intersect with the dirty area. nsLineBox* cursor = GetStateBits() & NS_FRAME_FORCE_DISPLAY_LIST_DESCEND_INTO ? nsnull : GetFirstLineContaining(aDirtyRect.y); line_iterator line_end = end_lines(); nsresult rv = NS_OK; if (cursor) { for (line_iterator line = mLines.begin(cursor); line != line_end; ++line) { nsRect lineArea = line->GetCombinedArea(); if (!lineArea.IsEmpty()) { // Because we have a cursor, the combinedArea.ys are non-decreasing. // Once we've passed aDirtyRect.YMost(), we can never see it again. if (lineArea.y >= aDirtyRect.YMost()) { break; } rv = DisplayLine(aBuilder, lineArea, aDirtyRect, line, depth, drawnLines, aLists, this); if (NS_FAILED(rv)) break; } } } else { PRBool nonDecreasingYs = PR_TRUE; PRInt32 lineCount = 0; nscoord lastY = PR_INT32_MIN; nscoord lastYMost = PR_INT32_MIN; for (line_iterator line = begin_lines(); line != line_end; ++line) { nsRect lineArea = line->GetCombinedArea(); rv = DisplayLine(aBuilder, lineArea, aDirtyRect, line, depth, drawnLines, aLists, this); if (NS_FAILED(rv)) break; if (!lineArea.IsEmpty()) { if (lineArea.y < lastY || lineArea.YMost() < lastYMost) { nonDecreasingYs = PR_FALSE; } lastY = lineArea.y; lastYMost = lineArea.YMost(); } lineCount++; } if (NS_SUCCEEDED(rv) && nonDecreasingYs && lineCount >= MIN_LINES_NEEDING_CURSOR) { SetupLineCursor(); } } if (NS_SUCCEEDED(rv) && (nsnull != mBullet) && HaveOutsideBullet()) { // Display outside bullets manually rv = BuildDisplayListForChild(aBuilder, mBullet, aDirtyRect, aLists); } #ifdef DEBUG if (gLamePaintMetrics) { PRTime end = PR_Now(); PRInt32 numLines = mLines.size(); if (!numLines) numLines = 1; PRTime lines, deltaPerLine, delta; LL_I2L(lines, numLines); LL_SUB(delta, end, start); LL_DIV(deltaPerLine, delta, lines); ListTag(stdout); char buf[400]; PR_snprintf(buf, sizeof(buf), ": %lld elapsed (%lld per line) lines=%d drawn=%d skip=%d", delta, deltaPerLine, numLines, drawnLines, numLines - drawnLines); printf("%s\n", buf); } #endif return rv; } #ifdef ACCESSIBILITY NS_IMETHODIMP nsBlockFrame::GetAccessible(nsIAccessible** aAccessible) { *aAccessible = nsnull; nsCOMPtr accService = do_GetService("@mozilla.org/accessibilityService;1"); NS_ENSURE_TRUE(accService, NS_ERROR_FAILURE); // block frame may be for

    if (mContent->Tag() == nsGkAtoms::hr) { return accService->CreateHTMLHRAccessible(NS_STATIC_CAST(nsIFrame*, this), aAccessible); } nsPresContext *aPresContext = PresContext(); if (!mBullet || !aPresContext) { if (!mContent || !mContent->GetParent()) { // Don't create accessible objects for the root content node, they are redundant with // the nsDocAccessible object created with the document node return NS_ERROR_FAILURE; } nsCOMPtr htmlDoc = do_QueryInterface(mContent->GetDocument()); if (htmlDoc) { nsCOMPtr body; htmlDoc->GetBody(getter_AddRefs(body)); if (SameCOMIdentity(body, mContent)) { // Don't create accessible objects for the body, they are redundant with // the nsDocAccessible object created with the document node return NS_ERROR_FAILURE; } } // Not a bullet, treat as normal HTML container return accService->CreateHyperTextAccessible(NS_STATIC_CAST(nsIFrame*, this), aAccessible); } // Create special list bullet accessible const nsStyleList* myList = GetStyleList(); nsAutoString bulletText; if (myList->mListStyleImage || myList->mListStyleType == NS_STYLE_LIST_STYLE_DISC || myList->mListStyleType == NS_STYLE_LIST_STYLE_CIRCLE || myList->mListStyleType == NS_STYLE_LIST_STYLE_SQUARE) { bulletText.Assign(PRUnichar(0x2022));; // Unicode bullet character } else if (myList->mListStyleType != NS_STYLE_LIST_STYLE_NONE) { mBullet->GetListItemText(*myList, bulletText); } return accService->CreateHTMLLIAccessible(NS_STATIC_CAST(nsIFrame*, this), NS_STATIC_CAST(nsIFrame*, mBullet), bulletText, aAccessible); } #endif void nsBlockFrame::ClearLineCursor() { if (!(GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR)) { return; } UnsetProperty(nsGkAtoms::lineCursorProperty); RemoveStateBits(NS_BLOCK_HAS_LINE_CURSOR); } void nsBlockFrame::SetupLineCursor() { if (GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR || mLines.empty()) { return; } SetProperty(nsGkAtoms::lineCursorProperty, mLines.front(), nsnull); AddStateBits(NS_BLOCK_HAS_LINE_CURSOR); } nsLineBox* nsBlockFrame::GetFirstLineContaining(nscoord y) { if (!(GetStateBits() & NS_BLOCK_HAS_LINE_CURSOR)) { return nsnull; } nsLineBox* property = NS_STATIC_CAST(nsLineBox*, GetProperty(nsGkAtoms::lineCursorProperty)); line_iterator cursor = mLines.begin(property); nsRect cursorArea = cursor->GetCombinedArea(); while ((cursorArea.IsEmpty() || cursorArea.YMost() > y) && cursor != mLines.front()) { cursor = cursor.prev(); cursorArea = cursor->GetCombinedArea(); } while ((cursorArea.IsEmpty() || cursorArea.YMost() <= y) && cursor != mLines.back()) { cursor = cursor.next(); cursorArea = cursor->GetCombinedArea(); } if (cursor.get() != property) { SetProperty(nsGkAtoms::lineCursorProperty, cursor.get(), nsnull); } return cursor.get(); } /* virtual */ void nsBlockFrame::ChildIsDirty(nsIFrame* aChild) { // See if the child is absolutely positioned if (aChild->GetStateBits() & NS_FRAME_OUT_OF_FLOW && aChild->GetStyleDisplay()->IsAbsolutelyPositioned()) { // do nothing } else if (aChild == mBullet && HaveOutsideBullet()) { // The bullet lives in the first line, unless the first line has // height 0 and there is a second line, in which case it lives // in the second line. line_iterator bulletLine = begin_lines(); if (bulletLine != end_lines() && bulletLine->mBounds.height == 0 && bulletLine != mLines.back()) { bulletLine = bulletLine.next(); } if (bulletLine != end_lines()) { MarkLineDirty(bulletLine); } // otherwise we have an empty line list, and ReflowDirtyLines // will handle reflowing the bullet. } else { // Mark the line containing the child frame dirty. line_iterator fline = FindLineFor(aChild); if (fline != end_lines()) MarkLineDirty(fline); } nsBlockFrameSuper::ChildIsDirty(aChild); } ////////////////////////////////////////////////////////////////////// // Start Debugging #ifdef NS_DEBUG static PRBool InLineList(nsLineList& aLines, nsIFrame* aFrame) { for (nsLineList::iterator line = aLines.begin(), line_end = aLines.end(); line != line_end; ++line) { nsIFrame* frame = line->mFirstChild; PRInt32 n = line->GetChildCount(); while (--n >= 0) { if (frame == aFrame) { return PR_TRUE; } frame = frame->GetNextSibling(); } } return PR_FALSE; } static PRBool InSiblingList(nsLineList& aLines, nsIFrame* aFrame) { if (! aLines.empty()) { nsIFrame* frame = aLines.front()->mFirstChild; while (frame) { if (frame == aFrame) { return PR_TRUE; } frame = frame->GetNextSibling(); } } return PR_FALSE; } PRBool nsBlockFrame::IsChild(nsIFrame* aFrame) { // Continued out-of-flows don't satisfy InLineList(), continued out-of-flows // and placeholders don't satisfy InSiblingList(). PRBool skipLineList = PR_FALSE; PRBool skipSiblingList = PR_FALSE; nsIFrame* prevInFlow = aFrame->GetPrevInFlow(); PRBool isPlaceholder = nsGkAtoms::placeholderFrame == aFrame->GetType(); if (prevInFlow) { nsFrameState state = aFrame->GetStateBits(); skipLineList = (state & NS_FRAME_OUT_OF_FLOW); skipSiblingList = isPlaceholder || (state & NS_FRAME_OUT_OF_FLOW); } if (isPlaceholder) { nsFrameList* overflowPlaceholders = GetOverflowPlaceholders(); if (overflowPlaceholders && overflowPlaceholders->ContainsFrame(aFrame)) { return PR_TRUE; } } if (aFrame->GetParent() != (nsIFrame*)this) { return PR_FALSE; } if ((skipLineList || InLineList(mLines, aFrame)) && (skipSiblingList || InSiblingList(mLines, aFrame))) { return PR_TRUE; } nsLineList* overflowLines = GetOverflowLines(); if (overflowLines && (skipLineList || InLineList(*overflowLines, aFrame)) && (skipSiblingList || InSiblingList(*overflowLines, aFrame))) { return PR_TRUE; } return PR_FALSE; } NS_IMETHODIMP nsBlockFrame::VerifyTree() const { // XXX rewrite this return NS_OK; } #endif // End Debugging ////////////////////////////////////////////////////////////////////// NS_IMETHODIMP nsBlockFrame::Init(nsIContent* aContent, nsIFrame* aParent, nsIFrame* aPrevInFlow) { if (aPrevInFlow) { // Copy over the block/area frame type flags nsBlockFrame* blockFrame = (nsBlockFrame*)aPrevInFlow; SetFlags(blockFrame->mState & (NS_BLOCK_FLAGS_MASK & ~NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET)); } nsresult rv = nsBlockFrameSuper::Init(aContent, aParent, aPrevInFlow); return rv; } NS_IMETHODIMP nsBlockFrame::SetInitialChildList(nsIAtom* aListName, nsIFrame* aChildList) { nsresult rv = NS_OK; if (mAbsoluteContainer.GetChildListName() == aListName) { mAbsoluteContainer.SetInitialChildList(this, aListName, aChildList); } else if (nsGkAtoms::floatList == aListName) { mFloats.SetFrames(aChildList); } else { nsPresContext* presContext = PresContext(); #ifdef DEBUG // The only times a block that is an anonymous box is allowed to have a // first-letter frame are when it's the block inside a non-anonymous cell, // the block inside a fieldset, a scrolled content block, or a column // content block. Note that this means that blocks which are the anonymous // block in {ib} splits do NOT get first-letter frames. Also, a block that // has a previous continuation can't have a first letter frame. nsIAtom *pseudo = GetStyleContext()->GetPseudoType(); PRBool haveFirstLetterStyle = !GetPrevContinuation() && (!pseudo || (pseudo == nsCSSAnonBoxes::cellContent && mParent->GetStyleContext()->GetPseudoType() == nsnull) || pseudo == nsCSSAnonBoxes::fieldsetContent || pseudo == nsCSSAnonBoxes::scrolledContent || pseudo == nsCSSAnonBoxes::columnContent) && nsRefPtr(GetFirstLetterStyle(presContext)) != nsnull; NS_ASSERTION(haveFirstLetterStyle == ((mState & NS_BLOCK_HAS_FIRST_LETTER_STYLE) != 0), "NS_BLOCK_HAS_FIRST_LETTER_STYLE state out of sync"); #endif rv = AddFrames(aChildList, nsnull); if (NS_FAILED(rv)) { return rv; } // Create list bullet if this is a list-item. Note that this is done // here so that RenumberLists will work (it needs the bullets to // store the bullet numbers). const nsStyleDisplay* styleDisplay = GetStyleDisplay(); if ((nsnull == GetPrevInFlow()) && (NS_STYLE_DISPLAY_LIST_ITEM == styleDisplay->mDisplay) && (nsnull == mBullet)) { // Resolve style for the bullet frame const nsStyleList* styleList = GetStyleList(); nsIAtom *pseudoElement; switch (styleList->mListStyleType) { case NS_STYLE_LIST_STYLE_DISC: case NS_STYLE_LIST_STYLE_CIRCLE: case NS_STYLE_LIST_STYLE_SQUARE: pseudoElement = nsCSSPseudoElements::mozListBullet; break; default: pseudoElement = nsCSSPseudoElements::mozListNumber; break; } nsIPresShell *shell = presContext->PresShell(); nsRefPtr kidSC = shell->StyleSet()-> ResolvePseudoStyleFor(mContent, pseudoElement, mStyleContext); // Create bullet frame nsBulletFrame* bullet = new (shell) nsBulletFrame(kidSC); if (nsnull == bullet) { return NS_ERROR_OUT_OF_MEMORY; } bullet->Init(mContent, this, nsnull); // If the list bullet frame should be positioned inside then add // it to the flow now. if (NS_STYLE_LIST_STYLE_POSITION_INSIDE == styleList->mListStylePosition) { AddFrames(bullet, nsnull); mState &= ~NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET; } else { mState |= NS_BLOCK_FRAME_HAS_OUTSIDE_BULLET; } mBullet = bullet; } } return NS_OK; } // static PRBool nsBlockFrame::FrameStartsCounterScope(nsIFrame* aFrame) { nsIContent* content = aFrame->GetContent(); if (!content || !content->IsNodeOfType(nsINode::eHTML)) return PR_FALSE; nsIAtom *localName = content->NodeInfo()->NameAtom(); return localName == nsGkAtoms::ol || localName == nsGkAtoms::ul || localName == nsGkAtoms::dir || localName == nsGkAtoms::menu; } PRBool nsBlockFrame::RenumberLists(nsPresContext* aPresContext) { if (!FrameStartsCounterScope(this)) { // If this frame doesn't start a counter scope then we don't need // to renumber child list items. return PR_FALSE; } // Setup initial list ordinal value // XXX Map html's start property to counter-reset style PRInt32 ordinal = 1; nsGenericHTMLElement *hc = nsGenericHTMLElement::FromContent(mContent); if (hc) { const nsAttrValue* attr = hc->GetParsedAttr(nsGkAtoms::start); if (attr && attr->Type() == nsAttrValue::eInteger) { ordinal = attr->GetIntegerValue(); } } // Get to first-in-flow nsBlockFrame* block = (nsBlockFrame*) GetFirstInFlow(); return RenumberListsInBlock(aPresContext, block, &ordinal, 0); } PRBool nsBlockFrame::RenumberListsInBlock(nsPresContext* aPresContext, nsBlockFrame* aBlockFrame, PRInt32* aOrdinal, PRInt32 aDepth) { PRBool renumberedABullet = PR_FALSE; while (nsnull != aBlockFrame) { // Examine each line in the block for (line_iterator line = aBlockFrame->begin_lines(), line_end = aBlockFrame->end_lines(); line != line_end; ++line) { nsIFrame* kid = line->mFirstChild; PRInt32 n = line->GetChildCount(); while (--n >= 0) { PRBool kidRenumberedABullet = RenumberListsFor(aPresContext, kid, aOrdinal, aDepth); if (kidRenumberedABullet) { line->MarkDirty(); renumberedABullet = PR_TRUE; } kid = kid->GetNextSibling(); } } // Advance to the next continuation aBlockFrame = NS_STATIC_CAST(nsBlockFrame*, aBlockFrame->GetNextInFlow()); } return renumberedABullet; } PRBool nsBlockFrame::RenumberListsFor(nsPresContext* aPresContext, nsIFrame* aKid, PRInt32* aOrdinal, PRInt32 aDepth) { NS_PRECONDITION(aPresContext && aKid && aOrdinal, "null params are immoral!"); // add in a sanity check for absurdly deep frame trees. See bug 42138 if (MAX_DEPTH_FOR_LIST_RENUMBERING < aDepth) return PR_FALSE; PRBool kidRenumberedABullet = PR_FALSE; // if the frame is a placeholder, then get the out of flow frame nsIFrame* kid = nsPlaceholderFrame::GetRealFrameFor(aKid); // drill down through any wrappers to the real frame kid = kid->GetContentInsertionFrame(); // If the frame is a list-item and the frame implements our // block frame API then get its bullet and set the list item // ordinal. const nsStyleDisplay* display = kid->GetStyleDisplay(); if (NS_STYLE_DISPLAY_LIST_ITEM == display->mDisplay) { // Make certain that the frame is a block frame in case // something foreign has crept in. nsBlockFrame* listItem; nsresult rv = kid->QueryInterface(kBlockFrameCID, (void**)&listItem); if (NS_SUCCEEDED(rv)) { if (nsnull != listItem->mBullet) { PRBool changed; *aOrdinal = listItem->mBullet->SetListItemOrdinal(*aOrdinal, &changed); if (changed) { kidRenumberedABullet = PR_TRUE; // Invalidate the bullet content area since it may look different now nsRect damageRect(nsPoint(0, 0), listItem->mBullet->GetSize()); listItem->mBullet->Invalidate(damageRect); } } // XXX temporary? if the list-item has child list-items they // should be numbered too; especially since the list-item is // itself (ASSUMED!) not to be a counter-resetter. PRBool meToo = RenumberListsInBlock(aPresContext, listItem, aOrdinal, aDepth + 1); if (meToo) { kidRenumberedABullet = PR_TRUE; } } } else if (NS_STYLE_DISPLAY_BLOCK == display->mDisplay) { if (FrameStartsCounterScope(kid)) { // Don't bother recursing into a block frame that is a new // counter scope. Any list-items in there will be handled by // it. } else { // If the display=block element is a block frame then go ahead // and recurse into it, as it might have child list-items. nsBlockFrame* kidBlock; nsresult rv = kid->QueryInterface(kBlockFrameCID, (void**) &kidBlock); if (NS_SUCCEEDED(rv)) { kidRenumberedABullet = RenumberListsInBlock(aPresContext, kidBlock, aOrdinal, aDepth + 1); } } } return kidRenumberedABullet; } void nsBlockFrame::ReflowBullet(nsBlockReflowState& aState, nsHTMLReflowMetrics& aMetrics) { const nsHTMLReflowState &rs = aState.mReflowState; // Reflow the bullet now nsSize availSize; // Make up a width since it doesn't really matter (XXX). availSize.width = rs.ComputedWidth(); availSize.height = NS_UNCONSTRAINEDSIZE; // Get the reason right. // XXXwaterson Should this look just like the logic in // nsBlockReflowContext::ReflowBlock and nsLineLayout::ReflowFrame? nsHTMLReflowState reflowState(aState.mPresContext, rs, mBullet, availSize); nsReflowStatus status; mBullet->WillReflow(aState.mPresContext); mBullet->Reflow(aState.mPresContext, aMetrics, reflowState, status); // Place the bullet now; use its right margin to distance it // from the rest of the frames in the line nscoord x = #ifdef IBMBIDI (NS_STYLE_DIRECTION_RTL == GetStyleVisibility()->mDirection) // According to the CSS2 spec, section 12.6.1, outside marker box // is distanced from the associated principal box's border edge. // |rs.availableWidth| reflects exactly a border edge: it includes // border, padding, and content area, without margins. ? rs.ComputedWidth() + rs.mComputedBorderPadding.LeftRight() + reflowState.mComputedMargin.left : #endif - reflowState.mComputedMargin.right - aMetrics.width; // Approximate the bullets position; vertical alignment will provide // the final vertical location. const nsMargin& bp = aState.BorderPadding(); nscoord y = bp.top; mBullet->SetRect(nsRect(x, y, aMetrics.width, aMetrics.height)); mBullet->DidReflow(aState.mPresContext, &aState.mReflowState, NS_FRAME_REFLOW_FINISHED); } // This is used to scan frames for any float placeholders, add their // floats to the list represented by aHead and aTail, and remove the // floats from whatever list they might be in. We don't search descendants // that are float containing blocks. The floats must be children of 'this'. void nsBlockFrame::CollectFloats(nsIFrame* aFrame, nsFrameList& aList, nsIFrame** aTail, PRBool aFromOverflow, PRBool aCollectSiblings) { while (aFrame) { // Don't descend into float containing blocks. if (!aFrame->IsFloatContainingBlock()) { nsIFrame *outOfFlowFrame = nsLayoutUtils::GetFloatFromPlaceholder(aFrame); if (outOfFlowFrame) { // Make sure that its parent is us. Otherwise we don't want // to mess around with it because it belongs to someone // else. I think this could happen if the overflow lines // contain a block descendant which owns its own floats. NS_ASSERTION(outOfFlowFrame->GetParent() == this, "Out of flow frame doesn't have the expected parent"); if (aFromOverflow) { nsAutoOOFFrameList oofs(this); oofs.mList.RemoveFrame(outOfFlowFrame); } else { mFloats.RemoveFrame(outOfFlowFrame); } aList.InsertFrame(nsnull, *aTail, outOfFlowFrame); *aTail = outOfFlowFrame; } CollectFloats(aFrame->GetFirstChild(nsnull), aList, aTail, aFromOverflow, PR_TRUE); } if (!aCollectSiblings) break; aFrame = aFrame->GetNextSibling(); } } void nsBlockFrame::CheckFloats(nsBlockReflowState& aState) { #ifdef DEBUG // Check that the float list is what we would have built nsAutoVoidArray lineFloats; for (line_iterator line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { if (line->HasFloats()) { nsFloatCache* fc = line->GetFirstFloat(); while (fc) { nsIFrame* floatFrame = fc->mPlaceholder->GetOutOfFlowFrame(); lineFloats.AppendElement(floatFrame); fc = fc->Next(); } } } nsAutoVoidArray storedFloats; PRBool equal = PR_TRUE; PRInt32 i = 0; for (nsIFrame* f = mFloats.FirstChild(); f; f = f->GetNextSibling()) { storedFloats.AppendElement(f); if (i < lineFloats.Count() && lineFloats.ElementAt(i) != f) { equal = PR_FALSE; } ++i; } if (!equal || lineFloats.Count() != storedFloats.Count()) { NS_WARNING("nsBlockFrame::CheckFloats: Explicit float list is out of sync with float cache"); #if defined(DEBUG_roc) nsIFrameDebug::RootFrameList(PresContext(), stdout, 0); for (i = 0; i < lineFloats.Count(); ++i) { printf("Line float: %p\n", lineFloats.ElementAt(i)); } for (i = 0; i < storedFloats.Count(); ++i) { printf("Stored float: %p\n", storedFloats.ElementAt(i)); } #endif } #endif nsFrameList oofs = GetOverflowOutOfFlows(); if (oofs.NotEmpty()) { // Floats that were pushed should be removed from our space // manager. Otherwise the space manager's YMost or XMost might // be larger than necessary, causing this block to get an // incorrect desired height (or width). Some of these floats // may not actually have been added to the space manager because // they weren't reflowed before being pushed; that's OK, // RemoveRegions will ignore them. It is safe to do this here // because we know from here on the space manager will only be // used for its XMost and YMost, not to place new floats and // lines. aState.mSpaceManager->RemoveTrailingRegions(oofs.FirstChild()); } } /* static */ PRBool nsBlockFrame::BlockIsMarginRoot(nsIFrame* aBlock) { NS_PRECONDITION(aBlock, "Must have a frame"); #ifdef DEBUG nsBlockFrame* blockFrame; aBlock->QueryInterface(kBlockFrameCID, (void**)&blockFrame); NS_ASSERTION(blockFrame, "aBlock must be a block"); #endif nsIFrame* parent = aBlock->GetParent(); return (aBlock->GetStateBits() & NS_BLOCK_MARGIN_ROOT) || (parent && !parent->IsFloatContainingBlock() && parent->GetType() != nsGkAtoms::columnSetFrame); } /* static */ PRBool nsBlockFrame::BlockNeedsSpaceManager(nsIFrame* aBlock) { NS_PRECONDITION(aBlock, "Must have a frame"); #ifdef DEBUG nsBlockFrame* blockFrame; aBlock->QueryInterface(kBlockFrameCID, (void**)&blockFrame); NS_ASSERTION(blockFrame, "aBlock must be a block"); #endif nsIFrame* parent = aBlock->GetParent(); return (aBlock->GetStateBits() & NS_BLOCK_SPACE_MGR) || (parent && !parent->IsFloatContainingBlock()); } // XXX keep the text-run data in the first-in-flow of the block #ifdef IBMBIDI nsresult nsBlockFrame::ResolveBidi() { nsPresContext* presContext = PresContext(); if (!presContext->BidiEnabled()) { return NS_OK; } if (mLines.empty()) { return NS_OK; } nsBidiPresUtils* bidiUtils = presContext->GetBidiUtils(); if (!bidiUtils) return NS_OK; return bidiUtils->Resolve(presContext, this, mLines.front()->mFirstChild, IsVisualFormControl(presContext)); } PRBool nsBlockFrame::IsVisualFormControl(nsPresContext* aPresContext) { // This check is only necessary on visual bidi pages, because most // visual pages use logical order for form controls so that they will // display correctly on native widgets in OSs with Bidi support. // So bail out if the page is not visual, or if the pref is // set to use visual order on forms in visual pages if (!aPresContext->IsVisualMode()) { return PR_FALSE; } PRUint32 options = aPresContext->GetBidi(); if (IBMBIDI_CONTROLSTEXTMODE_LOGICAL != GET_BIDI_OPTION_CONTROLSTEXTMODE(options)) { return PR_FALSE; } nsIContent* content = GetContent(); for ( ; content; content = content->GetParent()) { if (content->IsNodeOfType(nsINode::eHTML_FORM_CONTROL)) { return PR_TRUE; } } return PR_FALSE; } #endif #ifdef DEBUG void nsBlockFrame::VerifyLines(PRBool aFinalCheckOK) { if (!gVerifyLines) { return; } if (mLines.empty()) { return; } // Add up the counts on each line. Also validate that IsFirstLine is // set properly. PRInt32 count = 0; PRBool seenBlock = PR_FALSE; line_iterator line, line_end; for (line = begin_lines(), line_end = end_lines(); line != line_end; ++line) { if (aFinalCheckOK) { NS_ABORT_IF_FALSE(line->GetChildCount(), "empty line"); if (line->IsBlock()) { seenBlock = PR_TRUE; } if (line->IsBlock()) { NS_ASSERTION(1 == line->GetChildCount(), "bad first line"); } } count += line->GetChildCount(); } // Then count the frames PRInt32 frameCount = 0; nsIFrame* frame = mLines.front()->mFirstChild; while (frame) { frameCount++; frame = frame->GetNextSibling(); } NS_ASSERTION(count == frameCount, "bad line list"); // Next: test that each line has right number of frames on it for (line = begin_lines(), line_end = end_lines(); line != line_end; ) { count = line->GetChildCount(); frame = line->mFirstChild; while (--count >= 0) { frame = frame->GetNextSibling(); } ++line; if ((line != line_end) && (0 != line->GetChildCount())) { NS_ASSERTION(frame == line->mFirstChild, "bad line list"); } } } // Its possible that a frame can have some frames on an overflow // list. But its never possible for multiple frames to have overflow // lists. Check that this fact is actually true. void nsBlockFrame::VerifyOverflowSituation() { nsBlockFrame* flow = (nsBlockFrame*) GetFirstInFlow(); while (nsnull != flow) { nsLineList* overflowLines = GetOverflowLines(); if (nsnull != overflowLines) { NS_ASSERTION(! overflowLines->empty(), "should not be empty if present"); NS_ASSERTION(overflowLines->front()->mFirstChild, "bad overflow list"); } flow = (nsBlockFrame*) flow->GetNextInFlow(); } } PRInt32 nsBlockFrame::GetDepth() const { PRInt32 depth = 0; nsIFrame* parent = mParent; while (parent) { parent = parent->GetParent(); depth++; } return depth; } #endif