/* -*- Mode: Java; c-basic-offset: 4; tab-width: 20; indent-tabs-mode: nil; -*- * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Android code. * * The Initial Developer of the Original Code is Mozilla Foundation. * Portions created by the Initial Developer are Copyright (C) 2009-2012 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Patrick Walton * Kartikaya Gupta * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ package org.mozilla.gecko.ui; import org.json.JSONObject; import org.json.JSONException; import org.mozilla.gecko.gfx.FloatSize; import org.mozilla.gecko.gfx.LayerController; import org.mozilla.gecko.gfx.PointUtils; import org.mozilla.gecko.gfx.ViewportMetrics; import org.mozilla.gecko.FloatUtils; import org.mozilla.gecko.GeckoApp; import org.mozilla.gecko.GeckoAppShell; import org.mozilla.gecko.GeckoEvent; import org.mozilla.gecko.GeckoEventListener; import android.graphics.PointF; import android.graphics.RectF; import android.util.FloatMath; import android.util.Log; import android.view.GestureDetector; import android.view.MotionEvent; import java.util.Timer; import java.util.TimerTask; /* * Handles the kinetic scrolling and zooming physics for a layer controller. * * Many ideas are from Joe Hewitt's Scrollability: * https://github.com/joehewitt/scrollability/ */ public class PanZoomController extends GestureDetector.SimpleOnGestureListener implements SimpleScaleGestureDetector.SimpleScaleGestureListener, GeckoEventListener { private static final String LOGTAG = "GeckoPanZoomController"; private static String MESSAGE_ZOOM_RECT = "Browser:ZoomToRect"; private static String MESSAGE_ZOOM_PAGE = "Browser:ZoomToPageWidth"; // Animation stops if the velocity is below this value when overscrolled or panning. private static final float STOPPED_THRESHOLD = 4.0f; // Animation stops is the velocity is below this threshold when flinging. private static final float FLING_STOPPED_THRESHOLD = 0.1f; // The distance the user has to pan before we recognize it as such (e.g. to avoid 1-pixel pans // between the touch-down and touch-up of a click). In units of density-independent pixels. public static final float PAN_THRESHOLD = 1/16f * GeckoAppShell.getDpi(); // Angle from axis within which we stay axis-locked private static final double AXIS_LOCK_ANGLE = Math.PI / 6.0; // 30 degrees // The maximum amount we allow you to zoom into a page private static final float MAX_ZOOM = 4.0f; /* 16 precomputed frames of the _ease-out_ animation from the CSS Transitions specification. */ private static final float[] EASE_OUT_ANIMATION_FRAMES = { 0.00000f, /* 0 */ 0.10211f, /* 1 */ 0.19864f, /* 2 */ 0.29043f, /* 3 */ 0.37816f, /* 4 */ 0.46155f, /* 5 */ 0.54054f, /* 6 */ 0.61496f, /* 7 */ 0.68467f, /* 8 */ 0.74910f, /* 9 */ 0.80794f, /* 10 */ 0.86069f, /* 11 */ 0.90651f, /* 12 */ 0.94471f, /* 13 */ 0.97401f, /* 14 */ 0.99309f, /* 15 */ }; private enum PanZoomState { NOTHING, /* no touch-start events received */ FLING, /* all touches removed, but we're still scrolling page */ TOUCHING, /* one touch-start event received */ PANNING_LOCKED, /* touch-start followed by move (i.e. panning with axis lock) */ PANNING, /* panning without axis lock */ PANNING_HOLD, /* in panning, but not moving. * similar to TOUCHING but after starting a pan */ PANNING_HOLD_LOCKED, /* like PANNING_HOLD, but axis lock still in effect */ PINCHING, /* nth touch-start, where n > 1. this mode allows pan and zoom */ ANIMATED_ZOOM /* animated zoom to a new rect */ } private final LayerController mController; private final SubdocumentScrollHelper mSubscroller; private final Axis mX; private final Axis mY; private Thread mMainThread; /* The timer that handles flings or bounces. */ private Timer mAnimationTimer; /* The runnable being scheduled by the animation timer. */ private AnimationRunnable mAnimationRunnable; /* The zoom focus at the first zoom event (in page coordinates). */ private PointF mLastZoomFocus; /* The time the last motion event took place. */ private long mLastEventTime; /* Current state the pan/zoom UI is in. */ private PanZoomState mState; public PanZoomController(LayerController controller) { mController = controller; mSubscroller = new SubdocumentScrollHelper(this); mX = new AxisX(mSubscroller); mY = new AxisY(mSubscroller); mMainThread = GeckoApp.mAppContext.getMainLooper().getThread(); checkMainThread(); mState = PanZoomState.NOTHING; GeckoAppShell.registerGeckoEventListener(MESSAGE_ZOOM_RECT, this); GeckoAppShell.registerGeckoEventListener(MESSAGE_ZOOM_PAGE, this); } // for debugging bug 713011; it can be taken out once that is resolved. private void checkMainThread() { if (mMainThread != Thread.currentThread()) { // log with full stack trace Log.e(LOGTAG, "Uh-oh, we're running on the wrong thread!", new Exception()); } } public void handleMessage(String event, JSONObject message) { Log.i(LOGTAG, "Got message: " + event); try { if (MESSAGE_ZOOM_RECT.equals(event)) { float x = (float)message.getDouble("x"); float y = (float)message.getDouble("y"); final RectF zoomRect = new RectF(x, y, x + (float)message.getDouble("w"), y + (float)message.getDouble("h")); mController.post(new Runnable() { public void run() { animatedZoomTo(zoomRect); } }); } else if (MESSAGE_ZOOM_PAGE.equals(event)) { FloatSize pageSize = mController.getPageSize(); RectF viewableRect = mController.getViewport(); float y = viewableRect.top; // attempt to keep zoom keep focused on the center of the viewport float newHeight = viewableRect.height() * pageSize.width / viewableRect.width(); float dh = viewableRect.height() - newHeight; // increase in the height final RectF r = new RectF(0.0f, y + dh/2, pageSize.width, y + dh/2 + newHeight); mController.post(new Runnable() { public void run() { animatedZoomTo(r); } }); } } catch (Exception e) { Log.e(LOGTAG, "Exception handling message \"" + event + "\":", e); } } public boolean onTouchEvent(MotionEvent event) { switch (event.getAction() & MotionEvent.ACTION_MASK) { case MotionEvent.ACTION_DOWN: return onTouchStart(event); case MotionEvent.ACTION_MOVE: return onTouchMove(event); case MotionEvent.ACTION_UP: return onTouchEnd(event); case MotionEvent.ACTION_CANCEL: return onTouchCancel(event); default: return false; } } /** This function must be called from the UI thread. */ public void abortAnimation() { checkMainThread(); // this happens when gecko changes the viewport on us or if the device is rotated. // if that's the case, abort any animation in progress and re-zoom so that the page // snaps to edges. for other cases (where the user's finger(s) are down) don't do // anything special. switch (mState) { case FLING: mX.stopFling(); mY.stopFling(); mState = PanZoomState.NOTHING; // fall through case ANIMATED_ZOOM: // the zoom that's in progress likely makes no sense any more (such as if // the screen orientation changed) so abort it // fall through case NOTHING: // Don't do animations here; they're distracting and can cause flashes on page // transitions. mController.setViewportMetrics(getValidViewportMetrics()); mController.notifyLayerClientOfGeometryChange(); break; } } /** This must be called on the UI thread. */ public void pageSizeUpdated() { if (mState == PanZoomState.NOTHING) { ViewportMetrics validated = getValidViewportMetrics(); if (! mController.getViewportMetrics().fuzzyEquals(validated)) { // page size changed such that we are now in overscroll. snap to the // the nearest valid viewport mController.setViewportMetrics(validated); mController.notifyLayerClientOfGeometryChange(); } } } /* * Panning/scrolling */ private boolean onTouchStart(MotionEvent event) { Log.d(LOGTAG, "onTouchStart in state " + mState); // user is taking control of movement, so stop // any auto-movement we have going stopAnimationTimer(); mSubscroller.cancel(); switch (mState) { case ANIMATED_ZOOM: return false; case FLING: case NOTHING: startTouch(event.getX(0), event.getY(0), event.getEventTime()); return false; case TOUCHING: case PANNING: case PANNING_LOCKED: case PANNING_HOLD: case PANNING_HOLD_LOCKED: case PINCHING: Log.e(LOGTAG, "Received impossible touch down while in " + mState); return false; } Log.e(LOGTAG, "Unhandled case " + mState + " in onTouchStart"); return false; } private boolean onTouchMove(MotionEvent event) { Log.d(LOGTAG, "onTouchMove in state " + mState); switch (mState) { case NOTHING: case FLING: // should never happen Log.e(LOGTAG, "Received impossible touch move while in " + mState); return false; case TOUCHING: if (panDistance(event) < PAN_THRESHOLD) { return false; } cancelTouch(); startPanning(event.getX(0), event.getY(0), event.getEventTime()); GeckoApp.mAppContext.hidePlugins(false /* don't hide layers */); GeckoApp.mAutoCompletePopup.hide(); track(event); return true; case PANNING_HOLD_LOCKED: GeckoApp.mAutoCompletePopup.hide(); mState = PanZoomState.PANNING_LOCKED; // fall through case PANNING_LOCKED: track(event); return true; case PANNING_HOLD: GeckoApp.mAutoCompletePopup.hide(); mState = PanZoomState.PANNING; // fall through case PANNING: track(event); return true; case ANIMATED_ZOOM: case PINCHING: // scale gesture listener will handle this return false; } Log.e(LOGTAG, "Unhandled case " + mState + " in onTouchMove"); return false; } private boolean onTouchEnd(MotionEvent event) { Log.d(LOGTAG, "onTouchEnd in " + mState); switch (mState) { case NOTHING: case FLING: // should never happen Log.e(LOGTAG, "Received impossible touch end while in " + mState); return false; case TOUCHING: mState = PanZoomState.NOTHING; // the switch into TOUCHING might have happened while the page was // snapping back after overscroll. we need to finish the snap if that // was the case bounce(); return false; case PANNING: case PANNING_LOCKED: case PANNING_HOLD: case PANNING_HOLD_LOCKED: mState = PanZoomState.FLING; fling(); return true; case PINCHING: mState = PanZoomState.NOTHING; return true; case ANIMATED_ZOOM: return false; } Log.e(LOGTAG, "Unhandled case " + mState + " in onTouchEnd"); return false; } private boolean onTouchCancel(MotionEvent event) { Log.d(LOGTAG, "onTouchCancel in " + mState); mState = PanZoomState.NOTHING; // ensure we snap back if we're overscrolled bounce(); return false; } private void startTouch(float x, float y, long time) { mX.startTouch(x); mY.startTouch(y); mState = PanZoomState.TOUCHING; mLastEventTime = time; } private void startPanning(float x, float y, long time) { float dx = mX.panDistance(x); float dy = mY.panDistance(y); double angle = Math.atan2(dy, dx); // range [-pi, pi] angle = Math.abs(angle); // range [0, pi] // When the touch move breaks through the pan threshold, reposition the touch down origin // so the page won't jump when we start panning. mX.startTouch(x); mY.startTouch(y); mLastEventTime = time; if (angle < AXIS_LOCK_ANGLE || angle > (Math.PI - AXIS_LOCK_ANGLE)) { mY.setScrollingDisabled(true); mState = PanZoomState.PANNING_LOCKED; } else if (Math.abs(angle - (Math.PI / 2)) < AXIS_LOCK_ANGLE) { mX.setScrollingDisabled(true); mState = PanZoomState.PANNING_LOCKED; } else { mState = PanZoomState.PANNING; } } private float panDistance(MotionEvent move) { float dx = mX.panDistance(move.getX(0)); float dy = mY.panDistance(move.getY(0)); return FloatMath.sqrt(dx * dx + dy * dy); } private void track(float x, float y, long time) { float timeDelta = (float)(time - mLastEventTime); if (FloatUtils.fuzzyEquals(timeDelta, 0)) { // probably a duplicate event, ignore it. using a zero timeDelta will mess // up our velocity return; } mLastEventTime = time; mX.updateWithTouchAt(x, timeDelta); mY.updateWithTouchAt(y, timeDelta); } private void track(MotionEvent event) { mX.saveTouchPos(); mY.saveTouchPos(); for (int i = 0; i < event.getHistorySize(); i++) { track(event.getHistoricalX(0, i), event.getHistoricalY(0, i), event.getHistoricalEventTime(i)); } track(event.getX(0), event.getY(0), event.getEventTime()); if (stopped()) { if (mState == PanZoomState.PANNING) { mState = PanZoomState.PANNING_HOLD; } else if (mState == PanZoomState.PANNING_LOCKED) { mState = PanZoomState.PANNING_HOLD_LOCKED; } else { // should never happen, but handle anyway for robustness Log.e(LOGTAG, "Impossible case " + mState + " when stopped in track"); mState = PanZoomState.PANNING_HOLD_LOCKED; } } mX.startPan(); mY.startPan(); updatePosition(); } private void fling() { updatePosition(); stopAnimationTimer(); boolean stopped = stopped(); mX.startFling(stopped); mY.startFling(stopped); startAnimationTimer(new FlingRunnable()); } /* Performs a bounce-back animation to the given viewport metrics. */ private void bounce(ViewportMetrics metrics) { stopAnimationTimer(); ViewportMetrics bounceStartMetrics = new ViewportMetrics(mController.getViewportMetrics()); if (bounceStartMetrics.fuzzyEquals(metrics)) { mState = PanZoomState.NOTHING; return; } mState = PanZoomState.FLING; Log.d(LOGTAG, "end bounce at " + metrics); startAnimationTimer(new BounceRunnable(bounceStartMetrics, metrics)); } /* Performs a bounce-back animation to the nearest valid viewport metrics. */ private void bounce() { bounce(getValidViewportMetrics()); } /* Starts the fling or bounce animation. */ private void startAnimationTimer(final AnimationRunnable runnable) { if (mAnimationTimer != null) { Log.e(LOGTAG, "Attempted to start a new fling without canceling the old one!"); stopAnimationTimer(); } GeckoApp.mAppContext.hidePlugins(false /* don't hide layers */); mAnimationTimer = new Timer("Animation Timer"); mAnimationRunnable = runnable; mAnimationTimer.scheduleAtFixedRate(new TimerTask() { @Override public void run() { mController.post(runnable); } }, 0, 1000L/60L); } /* Stops the fling or bounce animation. */ private void stopAnimationTimer() { if (mAnimationTimer != null) { mAnimationTimer.cancel(); mAnimationTimer = null; } if (mAnimationRunnable != null) { mAnimationRunnable.terminate(); mAnimationRunnable = null; } GeckoApp.mAppContext.showPlugins(); } private float getVelocity() { float xvel = mX.getRealVelocity(); float yvel = mY.getRealVelocity(); return FloatMath.sqrt(xvel * xvel + yvel * yvel); } private boolean stopped() { return getVelocity() < STOPPED_THRESHOLD; } PointF getDisplacement() { return new PointF(mX.resetDisplacement(), mY.resetDisplacement()); } private void updatePosition() { mX.displace(); mY.displace(); PointF displacement = getDisplacement(); if (! mSubscroller.scrollBy(displacement)) { synchronized (mController) { mController.scrollBy(displacement); } } } private abstract class AnimationRunnable implements Runnable { private boolean mAnimationTerminated; /* This should always run on the UI thread */ public final void run() { /* * Since the animation timer queues this runnable on the UI thread, it * is possible that even when the animation timer is cancelled, there * are multiple instances of this queued, so we need to have another * mechanism to abort. This is done by using the mAnimationTerminated flag. */ if (mAnimationTerminated) { return; } animateFrame(); } protected abstract void animateFrame(); /* This should always run on the UI thread */ protected final void terminate() { mAnimationTerminated = true; } } /* The callback that performs the bounce animation. */ private class BounceRunnable extends AnimationRunnable { /* The current frame of the bounce-back animation */ private int mBounceFrame; /* * The viewport metrics that represent the start and end of the bounce-back animation, * respectively. */ private ViewportMetrics mBounceStartMetrics; private ViewportMetrics mBounceEndMetrics; BounceRunnable(ViewportMetrics startMetrics, ViewportMetrics endMetrics) { mBounceStartMetrics = startMetrics; mBounceEndMetrics = endMetrics; } protected void animateFrame() { /* * The pan/zoom controller might have signaled to us that it wants to abort the * animation by setting the state to PanZoomState.NOTHING. Handle this case and bail * out. */ if (mState != PanZoomState.FLING) { finishAnimation(); return; } /* Perform the next frame of the bounce-back animation. */ if (mBounceFrame < EASE_OUT_ANIMATION_FRAMES.length) { advanceBounce(); return; } /* Finally, if there's nothing else to do, complete the animation and go to sleep. */ finishBounce(); finishAnimation(); mState = PanZoomState.NOTHING; } /* Performs one frame of a bounce animation. */ private void advanceBounce() { synchronized (mController) { float t = EASE_OUT_ANIMATION_FRAMES[mBounceFrame]; ViewportMetrics newMetrics = mBounceStartMetrics.interpolate(mBounceEndMetrics, t); mController.setViewportMetrics(newMetrics); mController.notifyLayerClientOfGeometryChange(); mBounceFrame++; } } /* Concludes a bounce animation and snaps the viewport into place. */ private void finishBounce() { synchronized (mController) { mController.setViewportMetrics(mBounceEndMetrics); mController.notifyLayerClientOfGeometryChange(); mBounceFrame = -1; } } } // The callback that performs the fling animation. private class FlingRunnable extends AnimationRunnable { protected void animateFrame() { /* * The pan/zoom controller might have signaled to us that it wants to abort the * animation by setting the state to PanZoomState.NOTHING. Handle this case and bail * out. */ if (mState != PanZoomState.FLING) { finishAnimation(); return; } /* Advance flings, if necessary. */ boolean flingingX = mX.advanceFling(); boolean flingingY = mY.advanceFling(); boolean overscrolled = (mX.overscrolled() || mY.overscrolled()); /* If we're still flinging in any direction, update the origin. */ if (flingingX || flingingY) { updatePosition(); /* * Check to see if we're still flinging with an appreciable velocity. The threshold is * higher in the case of overscroll, so we bounce back eagerly when overscrolling but * coast smoothly to a stop when not. In other words, require a greater velocity to * maintain the fling once we enter overscroll. */ float threshold = (overscrolled && !mSubscroller.scrolling() ? STOPPED_THRESHOLD : FLING_STOPPED_THRESHOLD); if (getVelocity() >= threshold) { // we're still flinging return; } mX.stopFling(); mY.stopFling(); } /* Perform a bounce-back animation if overscrolled. */ if (overscrolled) { bounce(); } else { finishAnimation(); mState = PanZoomState.NOTHING; } } } private void finishAnimation() { checkMainThread(); Log.d(LOGTAG, "Finishing animation at " + mController.getViewportMetrics()); stopAnimationTimer(); // Force a viewport synchronisation GeckoApp.mAppContext.showPlugins(); mController.setForceRedraw(); mController.notifyLayerClientOfGeometryChange(); } /* Returns the nearest viewport metrics with no overscroll visible. */ private ViewportMetrics getValidViewportMetrics() { return getValidViewportMetrics(new ViewportMetrics(mController.getViewportMetrics())); } private ViewportMetrics getValidViewportMetrics(ViewportMetrics viewportMetrics) { Log.d(LOGTAG, "generating valid viewport using " + viewportMetrics); /* First, we adjust the zoom factor so that we can make no overscrolled area visible. */ float zoomFactor = viewportMetrics.getZoomFactor(); FloatSize pageSize = viewportMetrics.getPageSize(); RectF viewport = viewportMetrics.getViewport(); float focusX = viewport.width() / 2.0f; float focusY = viewport.height() / 2.0f; float minZoomFactor = 0.0f; if (viewport.width() > pageSize.width && pageSize.width > 0) { float scaleFactor = viewport.width() / pageSize.width; minZoomFactor = Math.max(minZoomFactor, zoomFactor * scaleFactor); focusX = 0.0f; } if (viewport.height() > pageSize.height && pageSize.height > 0) { float scaleFactor = viewport.height() / pageSize.height; minZoomFactor = Math.max(minZoomFactor, zoomFactor * scaleFactor); focusY = 0.0f; } if (!FloatUtils.fuzzyEquals(minZoomFactor, 0.0f)) { // if one (or both) of the page dimensions is smaller than the viewport, // zoom using the top/left as the focus on that axis. this prevents the // scenario where, if both dimensions are smaller than the viewport, but // by different scale factors, we end up scrolled to the end on one axis // after applying the scale PointF center = new PointF(focusX, focusY); viewportMetrics.scaleTo(minZoomFactor, center); } else if (zoomFactor > MAX_ZOOM) { PointF center = new PointF(viewport.width() / 2.0f, viewport.height() / 2.0f); viewportMetrics.scaleTo(MAX_ZOOM, center); } /* Now we pan to the right origin. */ viewportMetrics.setViewport(viewportMetrics.getClampedViewport()); Log.d(LOGTAG, "generated valid viewport as " + viewportMetrics); return viewportMetrics; } private class AxisX extends Axis { AxisX(SubdocumentScrollHelper subscroller) { super(subscroller); } @Override public float getOrigin() { return mController.getOrigin().x; } @Override protected float getViewportLength() { return mController.getViewportSize().width; } @Override protected float getPageLength() { return mController.getPageSize().width; } } private class AxisY extends Axis { AxisY(SubdocumentScrollHelper subscroller) { super(subscroller); } @Override public float getOrigin() { return mController.getOrigin().y; } @Override protected float getViewportLength() { return mController.getViewportSize().height; } @Override protected float getPageLength() { return mController.getPageSize().height; } } /* * Zooming */ @Override public boolean onScaleBegin(SimpleScaleGestureDetector detector) { Log.d(LOGTAG, "onScaleBegin in " + mState); if (mState == PanZoomState.ANIMATED_ZOOM) return false; mState = PanZoomState.PINCHING; mLastZoomFocus = new PointF(detector.getFocusX(), detector.getFocusY()); GeckoApp.mAppContext.hidePlugins(false /* don't hide layers, only views */); GeckoApp.mAutoCompletePopup.hide(); cancelTouch(); return true; } @Override public boolean onScale(SimpleScaleGestureDetector detector) { Log.d(LOGTAG, "onScale in state " + mState); if (mState == PanZoomState.ANIMATED_ZOOM) return false; float prevSpan = detector.getPreviousSpan(); if (FloatUtils.fuzzyEquals(prevSpan, 0.0f)) { // let's eat this one to avoid setting the new zoom to infinity (bug 711453) return true; } float spanRatio = detector.getCurrentSpan() / prevSpan; /* * Apply edge resistance if we're zoomed out smaller than the page size by scaling the zoom * factor toward 1.0. */ float resistance = Math.min(mX.getEdgeResistance(), mY.getEdgeResistance()); if (spanRatio > 1.0f) spanRatio = 1.0f + (spanRatio - 1.0f) * resistance; else spanRatio = 1.0f - (1.0f - spanRatio) * resistance; synchronized (mController) { float newZoomFactor = mController.getZoomFactor() * spanRatio; if (newZoomFactor >= MAX_ZOOM) { // apply resistance when zooming past MAX_ZOOM, // such that it asymptotically reaches MAX_ZOOM + 1.0 // but never exceeds that float excessZoom = newZoomFactor - MAX_ZOOM; excessZoom = 1.0f - (float)Math.exp(-excessZoom); newZoomFactor = MAX_ZOOM + excessZoom; } mController.scrollBy(new PointF(mLastZoomFocus.x - detector.getFocusX(), mLastZoomFocus.y - detector.getFocusY())); PointF focus = new PointF(detector.getFocusX(), detector.getFocusY()); mController.scaleWithFocus(newZoomFactor, focus); } mLastZoomFocus.set(detector.getFocusX(), detector.getFocusY()); return true; } @Override public void onScaleEnd(SimpleScaleGestureDetector detector) { Log.d(LOGTAG, "onScaleEnd in " + mState); if (mState == PanZoomState.ANIMATED_ZOOM) return; // switch back to the touching state startTouch(detector.getFocusX(), detector.getFocusY(), detector.getEventTime()); // Force a viewport synchronisation GeckoApp.mAppContext.showPlugins(); mController.setForceRedraw(); mController.notifyLayerClientOfGeometryChange(); } public boolean getRedrawHint() { return (mState == PanZoomState.NOTHING || mState == PanZoomState.FLING); } private void sendPointToGecko(String event, MotionEvent motionEvent) { String json; try { PointF point = new PointF(motionEvent.getX(), motionEvent.getY()); point = mController.convertViewPointToLayerPoint(point); if (point == null) { return; } json = PointUtils.toJSON(point).toString(); } catch (Exception e) { Log.e(LOGTAG, "Unable to convert point to JSON for " + event, e); return; } GeckoAppShell.sendEventToGecko(GeckoEvent.createBroadcastEvent(event, json)); } @Override public void onLongPress(MotionEvent motionEvent) { sendPointToGecko("Gesture:LongPress", motionEvent); } @Override public boolean onDown(MotionEvent motionEvent) { sendPointToGecko("Gesture:ShowPress", motionEvent); return false; } @Override public boolean onSingleTapConfirmed(MotionEvent motionEvent) { GeckoApp.mAutoCompletePopup.hide(); sendPointToGecko("Gesture:SingleTap", motionEvent); return true; } @Override public boolean onDoubleTap(MotionEvent motionEvent) { sendPointToGecko("Gesture:DoubleTap", motionEvent); return true; } public void cancelTouch() { GeckoEvent e = GeckoEvent.createBroadcastEvent("Gesture:CancelTouch", ""); GeckoAppShell.sendEventToGecko(e); } private boolean animatedZoomTo(RectF zoomToRect) { GeckoApp.mAutoCompletePopup.hide(); mState = PanZoomState.ANIMATED_ZOOM; final float startZoom = mController.getZoomFactor(); RectF viewport = mController.getViewport(); // 1. adjust the aspect ratio of zoomToRect to match that of the current viewport, // enlarging as necessary (if it gets too big, it will get shrunk in the next step). // while enlarging make sure we enlarge equally on both sides to keep the target rect // centered. float targetRatio = viewport.width() / viewport.height(); float rectRatio = zoomToRect.width() / zoomToRect.height(); if (FloatUtils.fuzzyEquals(targetRatio, rectRatio)) { // all good, do nothing } else if (targetRatio < rectRatio) { // need to increase zoomToRect height float newHeight = zoomToRect.width() / targetRatio; zoomToRect.top -= (newHeight - zoomToRect.height()) / 2; zoomToRect.bottom = zoomToRect.top + newHeight; } else { // targetRatio > rectRatio) { // need to increase zoomToRect width float newWidth = targetRatio * zoomToRect.height(); zoomToRect.left -= (newWidth - zoomToRect.width()) / 2; zoomToRect.right = zoomToRect.left + newWidth; } float finalZoom = viewport.width() * startZoom / zoomToRect.width(); ViewportMetrics finalMetrics = new ViewportMetrics(mController.getViewportMetrics()); finalMetrics.setOrigin(new PointF(zoomToRect.left, zoomToRect.top)); finalMetrics.scaleTo(finalZoom, new PointF(0.0f, 0.0f)); // 2. now run getValidViewportMetrics on it, so that the target viewport is // clamped down to prevent overscroll, over-zoom, and other bad conditions. finalMetrics = getValidViewportMetrics(finalMetrics); bounce(finalMetrics); return true; } }