/* vim:set ts=2 sw=2 sts=2 et cindent: */ /* ***** BEGIN LICENSE BLOCK ***** * Version: ML 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla code. * * The Initial Developer of the Original Code is the Mozilla Corporation. * Portions created by the Initial Developer are Copyright (C) 2007 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Chris Double * Chris Pearce * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include #include "nsAudioStream.h" #include "nsTArray.h" #include "nsBuiltinDecoder.h" #include "nsBuiltinDecoderReader.h" #include "nsBuiltinDecoderStateMachine.h" #include "mozilla/mozalloc.h" #include "VideoUtils.h" using namespace mozilla; using namespace mozilla::layers; #ifdef PR_LOGGING extern PRLogModuleInfo* gBuiltinDecoderLog; #define LOG(type, msg) PR_LOG(gBuiltinDecoderLog, type, msg) #else #define LOG(type, msg) #endif // Wait this number of seconds when buffering, then leave and play // as best as we can if the required amount of data hasn't been // retrieved. #define BUFFERING_WAIT 30 // The amount of data to retrieve during buffering is computed based // on the download rate. BUFFERING_MIN_RATE is the minimum download // rate to be used in that calculation to help avoid constant buffering // attempts at a time when the average download rate has not stabilised. #define BUFFERING_MIN_RATE 50000 #define BUFFERING_RATE(x) ((x)< BUFFERING_MIN_RATE ? BUFFERING_MIN_RATE : (x)) // If audio queue has less than this many ms of decoded audio, we won't risk // trying to decode the video, we'll skip decoding video up to the next // keyframe. // // Also if the decode catches up with the end of the downloaded data, // we'll only go into BUFFERING state if we've got audio and have queued // less than LOW_AUDIO_MS of audio, or if we've got video and have queued // less than LOW_VIDEO_FRAMES frames. static const PRUint32 LOW_AUDIO_MS = 300; // If more than this many ms of decoded audio is queued, we'll hold off // decoding more audio. const unsigned AMPLE_AUDIO_MS = 2000; // Maximum number of bytes we'll allocate and write at once to the audio // hardware when the audio stream contains missing samples and we're // writing silence in order to fill the gap. We limit our silence-writes // to 32KB in order to avoid allocating an impossibly large chunk of // memory if we encounter a large chunk of silence. const PRUint32 SILENCE_BYTES_CHUNK = 32 * 1024; // If we have fewer than LOW_VIDEO_FRAMES decoded frames, and // we're not "pumping video", we'll skip the video up to the next keyframe // which is at or after the current playback position. // // Also if the decode catches up with the end of the downloaded data, // we'll only go into BUFFERING state if we've got audio and have queued // less than LOW_AUDIO_MS of audio, or if we've got video and have queued // less than LOW_VIDEO_FRAMES frames. static const PRUint32 LOW_VIDEO_FRAMES = 1; // If we've got more than AMPLE_VIDEO_FRAMES decoded video frames waiting in // the video queue, we will not decode any more video frames until some have // been consumed by the play state machine thread. static const PRUint32 AMPLE_VIDEO_FRAMES = 10; // Arbitrary "frame duration" when playing only audio. static const int AUDIO_DURATION_MS = 40; class nsAudioMetadataEventRunner : public nsRunnable { private: nsCOMPtr mDecoder; public: nsAudioMetadataEventRunner(nsBuiltinDecoder* aDecoder, PRUint32 aChannels, PRUint32 aRate, PRUint32 aFrameBufferLength) : mDecoder(aDecoder), mChannels(aChannels), mRate(aRate), mFrameBufferLength(aFrameBufferLength) { } NS_IMETHOD Run() { mDecoder->MetadataLoaded(mChannels, mRate, mFrameBufferLength); return NS_OK; } const PRUint32 mChannels; const PRUint32 mRate; const PRUint32 mFrameBufferLength; }; nsBuiltinDecoderStateMachine::nsBuiltinDecoderStateMachine(nsBuiltinDecoder* aDecoder, nsBuiltinDecoderReader* aReader) : mDecoder(aDecoder), mState(DECODER_STATE_DECODING_METADATA), mAudioMonitor("media.audiostream"), mCbCrSize(0), mPlayDuration(0), mBufferingEndOffset(0), mStartTime(-1), mEndTime(-1), mSeekTime(0), mReader(aReader), mCurrentFrameTime(0), mAudioStartTime(-1), mAudioEndTime(-1), mVideoFrameEndTime(-1), mVolume(1.0), mSeekable(PR_TRUE), mPositionChangeQueued(PR_FALSE), mAudioCompleted(PR_FALSE), mGotDurationFromMetaData(PR_FALSE), mStopDecodeThreads(PR_TRUE), mEventManager(aDecoder) { MOZ_COUNT_CTOR(nsBuiltinDecoderStateMachine); } nsBuiltinDecoderStateMachine::~nsBuiltinDecoderStateMachine() { MOZ_COUNT_DTOR(nsBuiltinDecoderStateMachine); } PRBool nsBuiltinDecoderStateMachine::HasFutureAudio() const { mDecoder->GetMonitor().AssertCurrentThreadIn(); NS_ASSERTION(HasAudio(), "Should only call HasFutureAudio() when we have audio"); // We've got audio ready to play if: // 1. We've not completed playback of audio, and // 2. we either have more than the threshold of decoded audio available, or // we've completely decoded all audio (but not finished playing it yet // as per 1). return !mAudioCompleted && (AudioDecodedMs() > LOW_AUDIO_MS || mReader->mAudioQueue.IsFinished()); } PRBool nsBuiltinDecoderStateMachine::HaveNextFrameData() const { mDecoder->GetMonitor().AssertCurrentThreadIn(); return (!HasAudio() || HasFutureAudio()) && (!HasVideo() || mReader->mVideoQueue.GetSize() > 0); } void nsBuiltinDecoderStateMachine::DecodeLoop() { NS_ASSERTION(OnDecodeThread(), "Should be on decode thread."); PRBool videoPlaying = PR_FALSE; PRBool audioPlaying = PR_FALSE; { MonitorAutoEnter mon(mDecoder->GetMonitor()); videoPlaying = HasVideo(); audioPlaying = HasAudio(); } // We want to "pump" the decode until we've got a few frames/samples decoded // before we consider whether decode is falling behind. PRBool audioPump = PR_TRUE; PRBool videoPump = PR_TRUE; // If the video decode is falling behind the audio, we'll start dropping the // inter-frames up until the next keyframe which is at or before the current // playback position. skipToNextKeyframe is PR_TRUE if we're currently // skipping up to the next keyframe. PRBool skipToNextKeyframe = PR_FALSE; // Once we've decoded more than videoPumpThreshold video frames, we'll // no longer be considered to be "pumping video". const unsigned videoPumpThreshold = AMPLE_VIDEO_FRAMES / 2; // After the audio decode fills with more than audioPumpThresholdMs ms // of decoded audio, we'll start to check whether the audio or video decode // is falling behind. const unsigned audioPumpThresholdMs = LOW_AUDIO_MS * 2; // Main decode loop. while (videoPlaying || audioPlaying) { PRBool audioWait = !audioPlaying; PRBool videoWait = !videoPlaying; { // Wait for more data to download if we've exhausted all our // buffered data. MonitorAutoEnter mon(mDecoder->GetMonitor()); if (mState == DECODER_STATE_SHUTDOWN || mStopDecodeThreads) break; } PRUint32 videoQueueSize = mReader->mVideoQueue.GetSize(); // Don't decode any more frames if we've filled our buffers. // Limits memory consumption. if (videoQueueSize > AMPLE_VIDEO_FRAMES) { videoWait = PR_TRUE; } // We don't want to consider skipping to the next keyframe if we've // only just started up the decode loop, so wait until we've decoded // some frames before allowing the keyframe skip. if (videoPump && videoQueueSize >= videoPumpThreshold) { videoPump = PR_FALSE; } if (audioPlaying && !videoPump && videoPlaying && videoQueueSize < LOW_VIDEO_FRAMES) { skipToNextKeyframe = PR_TRUE; } // Determine how much audio data is decoded ahead of the current playback // position. PRInt64 initialDownloadPosition = 0; PRInt64 currentTime = 0; PRInt64 audioDecoded = 0; { MonitorAutoEnter mon(mDecoder->GetMonitor()); currentTime = GetMediaTime(); audioDecoded = mReader->mAudioQueue.Duration(); if (mAudioEndTime != -1) { audioDecoded += mAudioEndTime - currentTime; } initialDownloadPosition = mDecoder->GetCurrentStream()->GetCachedDataEnd(mDecoder->mDecoderPosition); } // Don't decode any audio if the audio decode is way ahead. if (audioDecoded > AMPLE_AUDIO_MS) { audioWait = PR_TRUE; } if (audioPump && audioDecoded > audioPumpThresholdMs) { audioPump = PR_FALSE; } if (!audioPump && audioPlaying && audioDecoded < LOW_AUDIO_MS) { skipToNextKeyframe = PR_TRUE; } if (videoPlaying && !videoWait) { videoPlaying = mReader->DecodeVideoFrame(skipToNextKeyframe, currentTime); } { MonitorAutoEnter mon(mDecoder->GetMonitor()); initialDownloadPosition = mDecoder->GetCurrentStream()->GetCachedDataEnd(mDecoder->mDecoderPosition); mDecoder->GetMonitor().NotifyAll(); } if (audioPlaying && !audioWait) { audioPlaying = mReader->DecodeAudioData(); } { MonitorAutoEnter mon(mDecoder->GetMonitor()); if (!IsPlaying()) { // Update the ready state, so that the play DOM events fire. We only // need to do this if we're not playing; if we're playing the playback // code will do an update whenever it advances a frame. UpdateReadyState(); } if (mState == DECODER_STATE_SHUTDOWN || mStopDecodeThreads) { break; } if ((!HasAudio() || audioWait) && (!HasVideo() || videoWait)) { // All active bitstreams' decode is well ahead of the playback // position, we may as well wait for the playback to catch up. mon.Wait(); } } } { MonitorAutoEnter mon(mDecoder->GetMonitor()); if (!mStopDecodeThreads && mState != DECODER_STATE_SHUTDOWN && mState != DECODER_STATE_SEEKING) { mState = DECODER_STATE_COMPLETED; mDecoder->GetMonitor().NotifyAll(); } } LOG(PR_LOG_DEBUG, ("Shutting down DecodeLoop this=%p", this)); } PRBool nsBuiltinDecoderStateMachine::IsPlaying() { mDecoder->GetMonitor().AssertCurrentThreadIn(); return !mPlayStartTime.IsNull(); } void nsBuiltinDecoderStateMachine::AudioLoop() { NS_ASSERTION(OnAudioThread(), "Should be on audio thread."); LOG(PR_LOG_DEBUG, ("Begun audio thread/loop")); PRUint64 audioDuration = 0; PRInt64 audioStartTime = -1; PRUint32 channels, rate; float volume = -1; PRBool setVolume; { MonitorAutoEnter mon(mDecoder->GetMonitor()); mAudioCompleted = PR_FALSE; audioStartTime = mAudioStartTime; channels = mReader->GetInfo().mAudioChannels; rate = mReader->GetInfo().mAudioRate; NS_ASSERTION(audioStartTime != -1, "Should have audio start time by now"); } while (1) { // Wait while we're not playing, and we're not shutting down, or we're // playing and we've got no audio to play. { MonitorAutoEnter mon(mDecoder->GetMonitor()); NS_ASSERTION(mState != DECODER_STATE_DECODING_METADATA, "Should have meta data before audio started playing."); while (mState != DECODER_STATE_SHUTDOWN && !mStopDecodeThreads && (!IsPlaying() || mState == DECODER_STATE_BUFFERING || (mReader->mAudioQueue.GetSize() == 0 && !mReader->mAudioQueue.AtEndOfStream()))) { mon.Wait(); } // If we're shutting down, break out and exit the audio thread. if (mState == DECODER_STATE_SHUTDOWN || mStopDecodeThreads || mReader->mAudioQueue.AtEndOfStream()) { break; } // We only want to go to the expense of taking the audio monitor and // changing the volume if it's the first time we've entered the loop // (as we must sync the volume in case it's changed since the // nsAudioStream was created) or if the volume has changed. setVolume = volume != mVolume; volume = mVolume; } if (setVolume) { MonitorAutoEnter audioMon(mAudioMonitor); if (mAudioStream) { mAudioStream->SetVolume(volume); } } NS_ASSERTION(mReader->mAudioQueue.GetSize() > 0, "Should have data to play"); // See if there's missing samples in the audio stream. If there is, push // silence into the audio hardware, so we can play across the gap. const SoundData* s = mReader->mAudioQueue.PeekFront(); // Calculate the number of samples that have been pushed onto the audio // hardware. PRInt64 playedSamples = 0; if (!MsToSamples(audioStartTime, rate, playedSamples)) { NS_WARNING("Int overflow converting playedSamples"); break; } if (!AddOverflow(playedSamples, audioDuration, playedSamples)) { NS_WARNING("Int overflow adding playedSamples"); break; } // Calculate the timestamp of the next chunk of audio in numbers of // samples. PRInt64 sampleTime = 0; if (!MsToSamples(s->mTime, rate, sampleTime)) { NS_WARNING("Int overflow converting sampleTime"); break; } PRInt64 missingSamples = 0; if (!AddOverflow(sampleTime, -playedSamples, missingSamples)) { NS_WARNING("Int overflow adding missingSamples"); break; } if (missingSamples > 0) { // The next sound chunk begins some time after the end of the last chunk // we pushed to the sound hardware. We must push silence into the audio // hardware so that the next sound chunk begins playback at the correct // time. missingSamples = NS_MIN(static_cast(PR_UINT32_MAX), missingSamples); audioDuration += PlaySilence(static_cast(missingSamples), channels, playedSamples); } else { audioDuration += PlayFromAudioQueue(sampleTime, channels); } { MonitorAutoEnter mon(mDecoder->GetMonitor()); PRInt64 playedMs; if (!SamplesToMs(audioDuration, rate, playedMs)) { NS_WARNING("Int overflow calculating playedMs"); break; } if (!AddOverflow(audioStartTime, playedMs, mAudioEndTime)) { NS_WARNING("Int overflow calculating audio end time"); break; } PRInt64 audioAhead = mAudioEndTime - GetMediaTime(); if (audioAhead > AMPLE_AUDIO_MS) { // We've pushed enough audio onto the hardware that we've queued up a // significant amount ahead of the playback position. The decode // thread will be going to sleep, so we won't get any new samples // anyway, so sleep until we need to push to the hardware again. Wait(AMPLE_AUDIO_MS / 2); // Kick the decode thread; since above we only do a NotifyAll when // we pop an audio chunk of the queue, the decoder won't wake up if // we've got no more decoded chunks to push to the hardware. We can // hit this condition if the last sample in the stream doesn't have // it's EOS flag set, and the decode thread sleeps just after decoding // that packet, but before realising there's no more packets. mon.NotifyAll(); } } } if (mReader->mAudioQueue.AtEndOfStream() && mState != DECODER_STATE_SHUTDOWN && !mStopDecodeThreads) { // Last sample pushed to audio hardware, wait for the audio to finish, // before the audio thread terminates. MonitorAutoEnter audioMon(mAudioMonitor); if (mAudioStream) { mAudioStream->Drain(); // Fire one last event for any extra samples that didn't fill a framebuffer. mEventManager.Drain(mAudioEndTime); } LOG(PR_LOG_DEBUG, ("%p Reached audio stream end.", mDecoder)); } { MonitorAutoEnter mon(mDecoder->GetMonitor()); mAudioCompleted = PR_TRUE; UpdateReadyState(); // Kick the decode and state machine threads; they may be sleeping waiting // for this to finish. mDecoder->GetMonitor().NotifyAll(); } LOG(PR_LOG_DEBUG, ("Audio stream finished playing, audio thread exit")); } PRUint32 nsBuiltinDecoderStateMachine::PlaySilence(PRUint32 aSamples, PRUint32 aChannels, PRUint64 aSampleOffset) { MonitorAutoEnter audioMon(mAudioMonitor); if (mAudioStream->IsPaused()) { // The state machine has paused since we've released the decoder // monitor and acquired the audio monitor. Don't write any audio. return 0; } PRUint32 maxSamples = SILENCE_BYTES_CHUNK / aChannels; PRUint32 samples = NS_MIN(aSamples, maxSamples); PRUint32 numValues = samples * aChannels; nsAutoArrayPtr buf(new SoundDataValue[numValues]); memset(buf.get(), 0, sizeof(SoundDataValue) * numValues); mAudioStream->Write(buf, numValues, PR_TRUE); // Dispatch events to the DOM for the audio just written. mEventManager.QueueWrittenAudioData(buf.get(), numValues, (aSampleOffset + samples) * aChannels); return samples; } PRUint32 nsBuiltinDecoderStateMachine::PlayFromAudioQueue(PRUint64 aSampleOffset, PRUint32 aChannels) { nsAutoPtr sound(mReader->mAudioQueue.PopFront()); { MonitorAutoEnter mon(mDecoder->GetMonitor()); NS_WARN_IF_FALSE(IsPlaying(), "Should be playing"); // Awaken the decode loop if it's waiting for space to free up in the // audio queue. mDecoder->GetMonitor().NotifyAll(); } PRInt64 offset = -1; PRUint32 samples = 0; { MonitorAutoEnter audioMon(mAudioMonitor); if (!mAudioStream) { return 0; } // The state machine could have paused since we've released the decoder // monitor and acquired the audio monitor. Rather than acquire both // monitors, the audio stream also maintains whether its paused or not. // This prevents us from doing a blocking write while holding the audio // monitor while paused; we would block, and the state machine won't be // able to acquire the audio monitor in order to resume or destroy the // audio stream. if (!mAudioStream->IsPaused()) { mAudioStream->Write(sound->mAudioData, sound->AudioDataLength(), PR_TRUE); offset = sound->mOffset; samples = sound->mSamples; // Dispatch events to the DOM for the audio just written. mEventManager.QueueWrittenAudioData(sound->mAudioData.get(), sound->AudioDataLength(), (aSampleOffset + samples) * aChannels); } else { mReader->mAudioQueue.PushFront(sound); sound.forget(); } } if (offset != -1) { mDecoder->UpdatePlaybackOffset(offset); } return samples; } nsresult nsBuiltinDecoderStateMachine::Init(nsDecoderStateMachine* aCloneDonor) { nsBuiltinDecoderReader* cloneReader = nsnull; if (aCloneDonor) { cloneReader = static_cast(aCloneDonor)->mReader; } return mReader->Init(cloneReader); } void nsBuiltinDecoderStateMachine::StopPlayback(eStopMode aMode) { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); // Reset mPlayStartTime before we pause/shutdown the nsAudioStream. This is // so that if the audio loop is about to write audio, it will have the chance // to check to see if we're paused and not write the audio. If not, the // audio thread can block in the write, and we deadlock trying to acquire // the audio monitor upon resume playback. if (IsPlaying()) { mPlayDuration += TimeStamp::Now() - mPlayStartTime; mPlayStartTime = TimeStamp(); } if (HasAudio()) { MonitorAutoExit exitMon(mDecoder->GetMonitor()); MonitorAutoEnter audioMon(mAudioMonitor); if (mAudioStream) { if (aMode == AUDIO_PAUSE) { mAudioStream->Pause(); } else if (aMode == AUDIO_SHUTDOWN) { mAudioStream->Shutdown(); mAudioStream = nsnull; mEventManager.Clear(); } } } } void nsBuiltinDecoderStateMachine::StartPlayback() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); NS_ASSERTION(!IsPlaying(), "Shouldn't be playing when StartPlayback() is called"); mDecoder->GetMonitor().AssertCurrentThreadIn(); LOG(PR_LOG_DEBUG, ("%p StartPlayback", mDecoder)); if (HasAudio()) { MonitorAutoExit exitMon(mDecoder->GetMonitor()); MonitorAutoEnter audioMon(mAudioMonitor); if (mAudioStream) { // We have an audiostream, so it must have been paused the last time // StopPlayback() was called. mAudioStream->Resume(); } else { // No audiostream, create one. const nsVideoInfo& info = mReader->GetInfo(); mAudioStream = new nsAudioStream(); mAudioStream->Init(info.mAudioChannels, info.mAudioRate, MOZ_SOUND_DATA_FORMAT); mAudioStream->SetVolume(mVolume); } } mPlayStartTime = TimeStamp::Now(); mDecoder->GetMonitor().NotifyAll(); } void nsBuiltinDecoderStateMachine::UpdatePlaybackPosition(PRInt64 aTime) { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); NS_ASSERTION(mStartTime >= 0, "Should have positive mStartTime"); mCurrentFrameTime = aTime - mStartTime; NS_ASSERTION(mCurrentFrameTime >= 0, "CurrentTime should be positive!"); if (aTime > mEndTime) { NS_ASSERTION(mCurrentFrameTime > GetDuration(), "CurrentTime must be after duration if aTime > endTime!"); mEndTime = aTime; nsCOMPtr event = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::DurationChanged); NS_DispatchToMainThread(event, NS_DISPATCH_NORMAL); } if (!mPositionChangeQueued) { mPositionChangeQueued = PR_TRUE; nsCOMPtr event = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::PlaybackPositionChanged); NS_DispatchToMainThread(event, NS_DISPATCH_NORMAL); } // Notify DOM of any queued up audioavailable events mEventManager.DispatchPendingEvents(GetMediaTime()); } void nsBuiltinDecoderStateMachine::ClearPositionChangeFlag() { NS_ASSERTION(NS_IsMainThread(), "Should be on main thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); mPositionChangeQueued = PR_FALSE; } nsHTMLMediaElement::NextFrameStatus nsBuiltinDecoderStateMachine::GetNextFrameStatus() { MonitorAutoEnter mon(mDecoder->GetMonitor()); if (IsBuffering() || IsSeeking()) { return nsHTMLMediaElement::NEXT_FRAME_UNAVAILABLE_BUFFERING; } else if (HaveNextFrameData()) { return nsHTMLMediaElement::NEXT_FRAME_AVAILABLE; } return nsHTMLMediaElement::NEXT_FRAME_UNAVAILABLE; } void nsBuiltinDecoderStateMachine::SetVolume(float volume) { NS_ASSERTION(NS_IsMainThread(), "Should be on main thread."); MonitorAutoEnter mon(mDecoder->GetMonitor()); mVolume = volume; } float nsBuiltinDecoderStateMachine::GetCurrentTime() { NS_ASSERTION(NS_IsMainThread(), "Should be on main thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); return (float)mCurrentFrameTime / 1000.0; } PRInt64 nsBuiltinDecoderStateMachine::GetDuration() { mDecoder->GetMonitor().AssertCurrentThreadIn(); if (mEndTime == -1 || mStartTime == -1) return -1; return mEndTime - mStartTime; } void nsBuiltinDecoderStateMachine::SetDuration(PRInt64 aDuration) { NS_ASSERTION(NS_IsMainThread() || mDecoder->OnStateMachineThread(), "Should be on main or state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); if (mStartTime != -1) { mEndTime = mStartTime + aDuration; } else { mStartTime = 0; mEndTime = aDuration; } } void nsBuiltinDecoderStateMachine::SetSeekable(PRBool aSeekable) { NS_ASSERTION(NS_IsMainThread(), "Should be on main thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); mSeekable = aSeekable; } void nsBuiltinDecoderStateMachine::Shutdown() { NS_ASSERTION(NS_IsMainThread(), "Should be on main thread."); // Once we've entered the shutdown state here there's no going back. MonitorAutoEnter mon(mDecoder->GetMonitor()); // Change state before issuing shutdown request to threads so those // threads can start exiting cleanly during the Shutdown call. LOG(PR_LOG_DEBUG, ("%p Changed state to SHUTDOWN", mDecoder)); mState = DECODER_STATE_SHUTDOWN; mDecoder->GetMonitor().NotifyAll(); } void nsBuiltinDecoderStateMachine::Decode() { NS_ASSERTION(NS_IsMainThread(), "Should be on main thread."); // When asked to decode, switch to decoding only if // we are currently buffering. MonitorAutoEnter mon(mDecoder->GetMonitor()); if (mState == DECODER_STATE_BUFFERING) { LOG(PR_LOG_DEBUG, ("%p Changed state from BUFFERING to DECODING", mDecoder)); mState = DECODER_STATE_DECODING; mDecoder->GetMonitor().NotifyAll(); } } void nsBuiltinDecoderStateMachine::ResetPlayback() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mVideoFrameEndTime = -1; mAudioStartTime = -1; mAudioEndTime = -1; mAudioCompleted = PR_FALSE; } void nsBuiltinDecoderStateMachine::Seek(float aTime) { NS_ASSERTION(NS_IsMainThread(), "Should be on main thread."); MonitorAutoEnter mon(mDecoder->GetMonitor()); // nsBuiltinDecoder::mPlayState should be SEEKING while we seek, and // in that case nsBuiltinDecoder shouldn't be calling us. NS_ASSERTION(mState != DECODER_STATE_SEEKING, "We shouldn't already be seeking"); NS_ASSERTION(mState >= DECODER_STATE_DECODING, "We should have loaded metadata"); double t = aTime * 1000.0; if (t > PR_INT64_MAX) { // Prevent integer overflow. return; } mSeekTime = static_cast(t) + mStartTime; NS_ASSERTION(mSeekTime >= mStartTime && mSeekTime <= mEndTime, "Can only seek in range [0,duration]"); // Bound the seek time to be inside the media range. NS_ASSERTION(mStartTime != -1, "Should know start time by now"); NS_ASSERTION(mEndTime != -1, "Should know end time by now"); mSeekTime = NS_MIN(mSeekTime, mEndTime); mSeekTime = NS_MAX(mStartTime, mSeekTime); LOG(PR_LOG_DEBUG, ("%p Changed state to SEEKING (to %f)", mDecoder, aTime)); mState = DECODER_STATE_SEEKING; } void nsBuiltinDecoderStateMachine::StopDecodeThreads() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); mStopDecodeThreads = PR_TRUE; mDecoder->GetMonitor().NotifyAll(); if (mDecodeThread) { { MonitorAutoExit exitMon(mDecoder->GetMonitor()); mDecodeThread->Shutdown(); } mDecodeThread = nsnull; } if (mAudioThread) { { MonitorAutoExit exitMon(mDecoder->GetMonitor()); mAudioThread->Shutdown(); } mAudioThread = nsnull; } } nsresult nsBuiltinDecoderStateMachine::StartDecodeThreads() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); mStopDecodeThreads = PR_FALSE; if (!mDecodeThread && mState < DECODER_STATE_COMPLETED) { nsresult rv = NS_NewThread(getter_AddRefs(mDecodeThread)); if (NS_FAILED(rv)) { mState = DECODER_STATE_SHUTDOWN; return rv; } nsCOMPtr event = NS_NewRunnableMethod(this, &nsBuiltinDecoderStateMachine::DecodeLoop); mDecodeThread->Dispatch(event, NS_DISPATCH_NORMAL); } if (HasAudio() && !mAudioThread) { nsresult rv = NS_NewThread(getter_AddRefs(mAudioThread)); if (NS_FAILED(rv)) { mState = DECODER_STATE_SHUTDOWN; return rv; } nsCOMPtr event = NS_NewRunnableMethod(this, &nsBuiltinDecoderStateMachine::AudioLoop); mAudioThread->Dispatch(event, NS_DISPATCH_NORMAL); } return NS_OK; } PRInt64 nsBuiltinDecoderStateMachine::AudioDecodedMs() const { NS_ASSERTION(HasAudio(), "Should only call AudioDecodedMs() when we have audio"); // The amount of audio we have decoded is the amount of audio data we've // already decoded and pushed to the hardware, plus the amount of audio // data waiting to be pushed to the hardware. PRInt64 pushed = (mAudioEndTime != -1) ? (mAudioEndTime - GetMediaTime()) : 0; return pushed + mReader->mAudioQueue.Duration(); } PRBool nsBuiltinDecoderStateMachine::HasLowDecodedData() const { // We consider ourselves low on decoded data if we're low on audio, // provided we've not decoded to the end of the audio stream, or // if we're only playing video and we're low on video frames, provided // we've not decoded to the end of the video stream. return ((HasAudio() && !mReader->mAudioQueue.IsFinished() && AudioDecodedMs() < LOW_AUDIO_MS) || (!HasAudio() && HasVideo() && !mReader->mVideoQueue.IsFinished() && (PRUint32)mReader->mVideoQueue.GetSize() < LOW_VIDEO_FRAMES)); } PRBool nsBuiltinDecoderStateMachine::HasAmpleDecodedData() const { return (!HasAudio() || AudioDecodedMs() >= AMPLE_AUDIO_MS || mReader->mAudioQueue.IsFinished()) && (!HasVideo() || (PRUint32)mReader->mVideoQueue.GetSize() > AMPLE_VIDEO_FRAMES || mReader->mVideoQueue.AtEndOfStream()); } nsresult nsBuiltinDecoderStateMachine::Run() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); nsMediaStream* stream = mDecoder->GetCurrentStream(); NS_ENSURE_TRUE(stream, NS_ERROR_NULL_POINTER); while (PR_TRUE) { MonitorAutoEnter mon(mDecoder->GetMonitor()); switch (mState) { case DECODER_STATE_SHUTDOWN: if (IsPlaying()) { StopPlayback(AUDIO_SHUTDOWN); } StopDecodeThreads(); NS_ASSERTION(mState == DECODER_STATE_SHUTDOWN, "How did we escape from the shutdown state???"); return NS_OK; case DECODER_STATE_DECODING_METADATA: { LoadMetadata(); if (mState == DECODER_STATE_SHUTDOWN) { continue; } VideoData* videoData = FindStartTime(); if (videoData) { MonitorAutoExit exitMon(mDecoder->GetMonitor()); RenderVideoFrame(videoData); } // Start the decode threads, so that we can pre buffer the streams. // and calculate the start time in order to determine the duration. if (NS_FAILED(StartDecodeThreads())) { continue; } NS_ASSERTION(mStartTime != -1, "Must have start time"); NS_ASSERTION((!HasVideo() && !HasAudio()) || !mSeekable || mEndTime != -1, "Active seekable media should have end time"); NS_ASSERTION(!mSeekable || GetDuration() != -1, "Seekable media should have duration"); LOG(PR_LOG_DEBUG, ("%p Media goes from %lldms to %lldms (duration %lldms) seekable=%d", mDecoder, mStartTime, mEndTime, GetDuration(), mSeekable)); if (mState == DECODER_STATE_SHUTDOWN) continue; // Inform the element that we've loaded the metadata and the first frame, // setting the default framebuffer size for audioavailable events. Also, // if there is audio, let the MozAudioAvailable event manager know about // the metadata. const nsVideoInfo& info = mReader->GetInfo(); PRUint32 frameBufferLength = info.mAudioChannels * FRAMEBUFFER_LENGTH_PER_CHANNEL; nsCOMPtr metadataLoadedEvent = new nsAudioMetadataEventRunner(mDecoder, info.mAudioChannels, info.mAudioRate, frameBufferLength); NS_DispatchToMainThread(metadataLoadedEvent, NS_DISPATCH_NORMAL); if (HasAudio()) { mEventManager.Init(info.mAudioChannels, info.mAudioRate); mDecoder->RequestFrameBufferLength(frameBufferLength); } if (mState == DECODER_STATE_DECODING_METADATA) { LOG(PR_LOG_DEBUG, ("%p Changed state from DECODING_METADATA to DECODING", mDecoder)); mState = DECODER_STATE_DECODING; } // Start playback. if (mDecoder->GetState() == nsBuiltinDecoder::PLAY_STATE_PLAYING) { if (!IsPlaying()) { StartPlayback(); } } } break; case DECODER_STATE_DECODING: { if (NS_FAILED(StartDecodeThreads())) { continue; } AdvanceFrame(); if (mState != DECODER_STATE_DECODING) continue; if (HasLowDecodedData() && mDecoder->GetState() == nsBuiltinDecoder::PLAY_STATE_PLAYING && !stream->IsDataCachedToEndOfStream(mDecoder->mDecoderPosition) && !stream->IsSuspended()) { // We're low on decoded data, and/or our decode has caught up with // the download. Let's buffer to make sure we can play a decent // amount of video in the future. StartBuffering(); } } break; case DECODER_STATE_SEEKING: { // During the seek, don't have a lock on the decoder state, // otherwise long seek operations can block the main thread. // The events dispatched to the main thread are SYNC calls. // These calls are made outside of the decode monitor lock so // it is safe for the main thread to makes calls that acquire // the lock since it won't deadlock. We check the state when // acquiring the lock again in case shutdown has occurred // during the time when we didn't have the lock. PRInt64 seekTime = mSeekTime; mDecoder->StopProgressUpdates(); PRBool currentTimeChanged = false; PRInt64 mediaTime = GetMediaTime(); if (mediaTime != seekTime) { currentTimeChanged = true; // If in the midst of a seek, report the requested seek time // as the current time as required by step 8 of 4.8.10.9 'Seeking' // in the WHATWG spec. UpdatePlaybackPosition(seekTime); } // SeekingStarted will do a UpdateReadyStateForData which will // inform the element and its users that we have no frames // to display { MonitorAutoExit exitMon(mDecoder->GetMonitor()); nsCOMPtr startEvent = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::SeekingStarted); NS_DispatchToMainThread(startEvent, NS_DISPATCH_SYNC); } if (currentTimeChanged) { // The seek target is different than the current playback position, // we'll need to seek the playback position, so shutdown our decode // and audio threads. StopPlayback(AUDIO_SHUTDOWN); StopDecodeThreads(); ResetPlayback(); nsresult res; { MonitorAutoExit exitMon(mDecoder->GetMonitor()); // Now perform the seek. We must not hold the state machine monitor // while we seek, since the seek decodes. res = mReader->Seek(seekTime, mStartTime, mEndTime, mediaTime); } if (NS_SUCCEEDED(res)){ SoundData* audio = HasAudio() ? mReader->mAudioQueue.PeekFront() : nsnull; NS_ASSERTION(!audio || (audio->mTime <= seekTime && seekTime <= audio->mTime + audio->mDuration), "Seek target should lie inside the first audio block after seek"); PRInt64 startTime = (audio && audio->mTime < seekTime) ? audio->mTime : seekTime; mAudioStartTime = startTime; mPlayDuration = TimeDuration::FromMilliseconds(startTime); if (HasVideo()) { nsAutoPtr video(mReader->mVideoQueue.PeekFront()); if (video) { NS_ASSERTION(video->mTime <= seekTime && seekTime <= video->mEndTime, "Seek target should lie inside the first frame after seek"); RenderVideoFrame(video); mReader->mVideoQueue.PopFront(); } } } } mDecoder->StartProgressUpdates(); if (mState == DECODER_STATE_SHUTDOWN) continue; // Try to decode another frame to detect if we're at the end... LOG(PR_LOG_DEBUG, ("Seek completed, mCurrentFrameTime=%lld\n", mCurrentFrameTime)); // Change state to DECODING or COMPLETED now. SeekingStopped will // call nsBuiltinDecoderStateMachine::Seek to reset our state to SEEKING // if we need to seek again. nsCOMPtr stopEvent; if (GetMediaTime() == mEndTime) { LOG(PR_LOG_DEBUG, ("%p Changed state from SEEKING (to %lldms) to COMPLETED", mDecoder, seekTime)); stopEvent = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::SeekingStoppedAtEnd); mState = DECODER_STATE_COMPLETED; } else { LOG(PR_LOG_DEBUG, ("%p Changed state from SEEKING (to %lldms) to DECODING", mDecoder, seekTime)); stopEvent = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::SeekingStopped); mState = DECODER_STATE_DECODING; } mDecoder->GetMonitor().NotifyAll(); { MonitorAutoExit exitMon(mDecoder->GetMonitor()); NS_DispatchToMainThread(stopEvent, NS_DISPATCH_SYNC); } } break; case DECODER_STATE_BUFFERING: { // We will remain in the buffering state if we've not decoded enough // data to begin playback, or if we've not downloaded a reasonable // amount of data inside our buffering time. TimeDuration elapsed = TimeStamp::Now() - mBufferingStart; PRBool isLiveStream = mDecoder->GetCurrentStream()->GetLength() == -1; if (((!isLiveStream && !mDecoder->CanPlayThrough()) || !HasAmpleDecodedData()) && elapsed < TimeDuration::FromSeconds(BUFFERING_WAIT) && stream->GetCachedDataEnd(mDecoder->mDecoderPosition) < mBufferingEndOffset && !stream->IsDataCachedToEndOfStream(mDecoder->mDecoderPosition) && !stream->IsSuspended()) { LOG(PR_LOG_DEBUG, ("In buffering: buffering data until %u bytes available or %f seconds", PRUint32(mBufferingEndOffset - stream->GetCachedDataEnd(mDecoder->mDecoderPosition)), BUFFERING_WAIT - elapsed.ToSeconds())); Wait(1000); if (mState == DECODER_STATE_SHUTDOWN) continue; } else { LOG(PR_LOG_DEBUG, ("%p Changed state from BUFFERING to DECODING", mDecoder)); LOG(PR_LOG_DEBUG, ("%p Buffered for %lf seconds", mDecoder, (TimeStamp::Now() - mBufferingStart).ToSeconds())); mState = DECODER_STATE_DECODING; } if (mState != DECODER_STATE_BUFFERING) { // Notify to allow blocked decoder thread to continue mDecoder->GetMonitor().NotifyAll(); UpdateReadyState(); if (mDecoder->GetState() == nsBuiltinDecoder::PLAY_STATE_PLAYING) { if (!IsPlaying()) { StartPlayback(); } } } break; } case DECODER_STATE_COMPLETED: { if (NS_FAILED(StartDecodeThreads())) { continue; } // Play the remaining media. We want to run AdvanceFrame() at least // once to ensure the current playback position is advanced to the // end of the media, and so that we update the readyState. do { AdvanceFrame(); } while (mState == DECODER_STATE_COMPLETED && (mReader->mVideoQueue.GetSize() > 0 || (HasAudio() && !mAudioCompleted))); if (mAudioStream) { // Close the audio stream so that next time audio is used a new stream // is created. The StopPlayback call also resets the IsPlaying() state // so audio is restarted correctly. StopPlayback(AUDIO_SHUTDOWN); } if (mState != DECODER_STATE_COMPLETED) continue; LOG(PR_LOG_DEBUG, ("Shutting down the state machine thread")); StopDecodeThreads(); if (mDecoder->GetState() == nsBuiltinDecoder::PLAY_STATE_PLAYING) { PRInt64 videoTime = HasVideo() ? mVideoFrameEndTime : 0; PRInt64 clockTime = NS_MAX(mEndTime, NS_MAX(videoTime, GetAudioClock())); UpdatePlaybackPosition(clockTime); { MonitorAutoExit exitMon(mDecoder->GetMonitor()); nsCOMPtr event = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::PlaybackEnded); NS_DispatchToMainThread(event, NS_DISPATCH_SYNC); } } if (mState == DECODER_STATE_COMPLETED) { // We've finished playback. Shutdown the state machine thread, // in order to save memory on thread stacks, particuarly on Linux. nsCOMPtr event = new ShutdownThreadEvent(mDecoder->mStateMachineThread); NS_DispatchToMainThread(event, NS_DISPATCH_NORMAL); mDecoder->mStateMachineThread = nsnull; return NS_OK; } } break; } } return NS_OK; } void nsBuiltinDecoderStateMachine::RenderVideoFrame(VideoData* aData) { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); if (aData->mDuplicate) { return; } nsRefPtr image = aData->mImage; if (image) { const nsVideoInfo& info = mReader->GetInfo(); mDecoder->SetVideoData(gfxIntSize(info.mPicture.width, info.mPicture.height), info.mPixelAspectRatio, image); } } PRInt64 nsBuiltinDecoderStateMachine::GetAudioClock() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); if (!mAudioStream || !HasAudio()) return -1; PRInt64 t = mAudioStream->GetPosition(); return (t == -1) ? -1 : t + mAudioStartTime; } void nsBuiltinDecoderStateMachine::AdvanceFrame() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); // When it's time to display a frame, decode the frame and display it. if (mDecoder->GetState() == nsBuiltinDecoder::PLAY_STATE_PLAYING) { if (!IsPlaying()) { StartPlayback(); mDecoder->GetMonitor().NotifyAll(); } if (HasAudio() && mAudioStartTime == -1 && !mAudioCompleted) { // We've got audio (so we should sync off the audio clock), but we've not // played a sample on the audio thread, so we can't get a time from the // audio clock. Just wait and then return, to give the audio clock time // to tick. This should really wait for a specific signal from the audio // thread rather than polling after a sleep. See bug 568431 comment 4. Wait(AUDIO_DURATION_MS); return; } // Determine the clock time. If we've got audio, and we've not reached // the end of the audio, use the audio clock. However if we've finished // audio, or don't have audio, use the system clock. PRInt64 clock_time = -1; PRInt64 audio_time = GetAudioClock(); if (HasAudio() && !mAudioCompleted && audio_time != -1) { clock_time = audio_time; // Resync against the audio clock, while we're trusting the // audio clock. This ensures no "drift", particularly on Linux. mPlayStartTime = TimeStamp::Now() - TimeDuration::FromMilliseconds(clock_time); } else { // Sound is disabled on this system. Sync to the system clock. TimeDuration t = TimeStamp::Now() - mPlayStartTime + mPlayDuration; clock_time = (PRInt64)(1000 * t.ToSeconds()); // Ensure the clock can never go backwards. NS_ASSERTION(mCurrentFrameTime <= clock_time, "Clock should go forwards"); clock_time = NS_MAX(mCurrentFrameTime, clock_time) + mStartTime; } NS_ASSERTION(clock_time >= mStartTime, "Should have positive clock time."); nsAutoPtr videoData; if (mReader->mVideoQueue.GetSize() > 0) { VideoData* data = mReader->mVideoQueue.PeekFront(); while (clock_time >= data->mTime) { mVideoFrameEndTime = data->mEndTime; videoData = data; mReader->mVideoQueue.PopFront(); mDecoder->UpdatePlaybackOffset(data->mOffset); if (mReader->mVideoQueue.GetSize() == 0) break; data = mReader->mVideoQueue.PeekFront(); } } PRInt64 frameDuration = AUDIO_DURATION_MS; if (videoData) { // Decode one frame and display it NS_ASSERTION(videoData->mTime >= mStartTime, "Should have positive frame time"); { MonitorAutoExit exitMon(mDecoder->GetMonitor()); // If we have video, we want to increment the clock in steps of the frame // duration. RenderVideoFrame(videoData); } mDecoder->GetMonitor().NotifyAll(); frameDuration = videoData->mEndTime - videoData->mTime; videoData = nsnull; } // Cap the current time to the larger of the audio and video end time. // This ensures that if we're running off the system clock, we don't // advance the clock to after the media end time. if (mVideoFrameEndTime != -1 || mAudioEndTime != -1) { // These will be non -1 if we've displayed a video frame, or played an audio sample. clock_time = NS_MIN(clock_time, NS_MAX(mVideoFrameEndTime, mAudioEndTime)); if (clock_time > GetMediaTime()) { // Only update the playback position if the clock time is greater // than the previous playback position. The audio clock can // sometimes report a time less than its previously reported in // some situations, and we need to gracefully handle that. UpdatePlaybackPosition(clock_time); } } // If the number of audio/video samples queued has changed, either by // this function popping and playing a video sample, or by the audio // thread popping and playing an audio sample, we may need to update our // ready state. Post an update to do so. UpdateReadyState(); NS_ASSERTION(frameDuration >= 0, "Frame duration must be positive."); Wait(frameDuration); } else { if (IsPlaying()) { StopPlayback(AUDIO_PAUSE); mDecoder->GetMonitor().NotifyAll(); } if (mState == DECODER_STATE_DECODING || mState == DECODER_STATE_COMPLETED) { mDecoder->GetMonitor().Wait(); } } } void nsBuiltinDecoderStateMachine::Wait(PRUint32 aMs) { mDecoder->GetMonitor().AssertCurrentThreadIn(); TimeStamp end = TimeStamp::Now() + TimeDuration::FromMilliseconds(aMs); TimeStamp now; while ((now = TimeStamp::Now()) < end && mState != DECODER_STATE_SHUTDOWN && mState != DECODER_STATE_SEEKING) { TimeDuration d = end - now; PRInt64 ms = d.ToSeconds() * 1000; if (ms == 0) { break; } NS_ASSERTION(ms <= aMs && ms > 0, "nsBuiltinDecoderStateMachine::Wait interval very wrong!"); mDecoder->GetMonitor().Wait(PR_MillisecondsToInterval(ms)); } } VideoData* nsBuiltinDecoderStateMachine::FindStartTime() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); PRInt64 startTime = 0; mStartTime = 0; VideoData* v = nsnull; { MonitorAutoExit exitMon(mDecoder->GetMonitor()); v = mReader->FindStartTime(mReader->GetInfo().mDataOffset, startTime); } if (startTime != 0) { mStartTime = startTime; if (mGotDurationFromMetaData) { NS_ASSERTION(mEndTime != -1, "We should have mEndTime as supplied duration here"); // We were specified a duration from a Content-Duration HTTP header. // Adjust mEndTime so that mEndTime-mStartTime matches the specified // duration. mEndTime = mStartTime + mEndTime; } } // Set the audio start time to be start of media. If this lies before the // first acutal audio sample we have, we'll inject silence during playback // to ensure the audio starts at the correct time. mAudioStartTime = mStartTime; LOG(PR_LOG_DEBUG, ("%p Media start time is %lldms", mDecoder, mStartTime)); return v; } void nsBuiltinDecoderStateMachine::FindEndTime() { NS_ASSERTION(OnStateMachineThread(), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); nsMediaStream* stream = mDecoder->GetCurrentStream(); // Seek to the end of file to find the length and duration. PRInt64 length = stream->GetLength(); NS_ASSERTION(length > 0, "Must have a content length to get end time"); mEndTime = 0; PRInt64 endTime = 0; { MonitorAutoExit exitMon(mDecoder->GetMonitor()); endTime = mReader->FindEndTime(length); } if (endTime != -1) { mEndTime = endTime; } LOG(PR_LOG_DEBUG, ("%p Media end time is %lldms", mDecoder, mEndTime)); } void nsBuiltinDecoderStateMachine::UpdateReadyState() { mDecoder->GetMonitor().AssertCurrentThreadIn(); nsCOMPtr event; switch (GetNextFrameStatus()) { case nsHTMLMediaElement::NEXT_FRAME_UNAVAILABLE_BUFFERING: event = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::NextFrameUnavailableBuffering); break; case nsHTMLMediaElement::NEXT_FRAME_AVAILABLE: event = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::NextFrameAvailable); break; case nsHTMLMediaElement::NEXT_FRAME_UNAVAILABLE: event = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::NextFrameUnavailable); break; default: PR_NOT_REACHED("unhandled frame state"); } NS_DispatchToMainThread(event, NS_DISPATCH_NORMAL); } void nsBuiltinDecoderStateMachine::LoadMetadata() { NS_ASSERTION(IsCurrentThread(mDecoder->mStateMachineThread), "Should be on state machine thread."); mDecoder->GetMonitor().AssertCurrentThreadIn(); LOG(PR_LOG_DEBUG, ("Loading Media Headers")); nsresult res; { MonitorAutoExit exitMon(mDecoder->GetMonitor()); res = mReader->ReadMetadata(); } const nsVideoInfo& info = mReader->GetInfo(); if (NS_FAILED(res) || (!info.mHasVideo && !info.mHasAudio)) { mState = DECODER_STATE_SHUTDOWN; nsCOMPtr event = NS_NewRunnableMethod(mDecoder, &nsBuiltinDecoder::DecodeError); NS_DispatchToMainThread(event, NS_DISPATCH_NORMAL); return; } mDecoder->StartProgressUpdates(); mGotDurationFromMetaData = (GetDuration() != -1); } void nsBuiltinDecoderStateMachine::StartBuffering() { mDecoder->GetMonitor().AssertCurrentThreadIn(); if (IsPlaying()) { StopPlayback(AUDIO_PAUSE); mDecoder->GetMonitor().NotifyAll(); } // We need to tell the element that buffering has started. // We can't just directly send an asynchronous runnable that // eventually fires the "waiting" event. The problem is that // there might be pending main-thread events, such as "data // received" notifications, that mean we're not actually still // buffering by the time this runnable executes. So instead // we just trigger UpdateReadyStateForData; when it runs, it // will check the current state and decide whether to tell // the element we're buffering or not. UpdateReadyState(); mBufferingStart = TimeStamp::Now(); PRPackedBool reliable; double playbackRate = mDecoder->ComputePlaybackRate(&reliable); mBufferingEndOffset = mDecoder->mDecoderPosition + BUFFERING_RATE(playbackRate) * BUFFERING_WAIT; mState = DECODER_STATE_BUFFERING; LOG(PR_LOG_DEBUG, ("Changed state from DECODING to BUFFERING")); }