# # ***** BEGIN LICENSE BLOCK ***** # Version: MPL 1.1/GPL 2.0/LGPL 2.1 # # The contents of this file are subject to the Mozilla Public License Version # 1.1 (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # http://www.mozilla.org/MPL/ # # Software distributed under the License is distributed on an "AS IS" basis, # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License # for the specific language governing rights and limitations under the # License. # # The Original Code is mozilla.org code. # # The Initial Developer of the Original Code is # Netscape Communications Corporation. # Portions created by the Initial Developer are Copyright (C) 1998 # the Initial Developer. All Rights Reserved. # # Contributor(s): # # Alternatively, the contents of this file may be used under the terms of # either the GNU General Public License Version 2 or later (the "GPL"), or # the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), # in which case the provisions of the GPL or the LGPL are applicable instead # of those above. If you wish to allow use of your version of this file only # under the terms of either the GPL or the LGPL, and not to allow others to # use your version of this file under the terms of the MPL, indicate your # decision by deleting the provisions above and replace them with the notice # and other provisions required by the GPL or the LGPL. If you do not delete # the provisions above, a recipient may use your version of this file under # the terms of any one of the MPL, the GPL or the LGPL. # # ***** END LICENSE BLOCK ***** SignedBy=Authenticated by %S CertPassPrompt=Please enter the Personal Security Password for the PSM Private Keys security device. #These are for dialogs #Download Cert dialog newCAMessage1=Do you want to trust "%S" for the following purposes? unnamedCA=Certificate Authority (unnamed) #For editing cert trust editTrustWindowTitle=Edit certificate trust editTrustCA=The certificate "%S" represents a Certificate Authority. editTrustSSL=The certificate "%S" was issued by: editTrustEmail=The certificate "%S" was issued by: issuerNotTrusted=Because you do not trust the certificate authority that issued this certificate, you do not trust the authenticity of this certificate unless otherwise indicated here. issuerTrusted=Because you trust the certificate authority that issued this certificate, you trust the authenticity of this certificate unless otherwise indicated here. issuerNotKnown=Because you do not know the certificate authority that issued this certificate, you do not trust the authenticity of this certificate unless otherwise indicated here. issuerCertNotFound=Certificate for this certificate authority was not found #For Deleting Certificates deleteSslCertConfirm2=Are you sure you want to delete these web site exceptions? deleteSslCertImpact2=If you delete a web site exception, you restore the usual security checks for that site and require it uses a valid certificate. deleteSslCertTitle2=Delete Web Site Certificate Exceptions deleteUserCertConfirm=Are you sure you want to delete these certificates? deleteUserCertImpact=If you delete one of your own certificates, you can no longer use it to identify yourself. deleteUserCertTitle=Delete your Certificates deleteCaCertConfirm=Are you sure you want to delete these CA certificates? deleteCaCertImpactX=If you delete a certificate authority (CA) certificate, this application will no longer trust any certificates issued by that CA. deleteCaCertTitle=Delete CA Certificates deleteEmailCertConfirm=Are you sure you want to delete these people's e-mail certificates? deleteEmailCertImpactDesc=If you delete a person's e-mail certificate, you will no longer be able to send encrypted e-mail to that person. deleteEmailCertTitle=Delete E-Mail Certificates deleteOrphanCertConfirm=Are you sure you want to delete these certificates? deleteOrphanCertTitle=Delete Certificates #PKCS#12 file dialogs chooseP12RestoreFileDialog=File Name to Restore chooseP12BackupFileDialog=File Name to Backup file_browse_PKCS12_spec=PKCS12 Files #Preferences resetPreferences=Use this button to reset %S's security preferences to their factory settings. #Cert verification certVerified=This certificate has been verified for the following uses: certNotVerified_CertRevoked=Could not verify this certificate because it has been revoked. certNotVerified_CertExpired=Could not verify this certificate because it has expired. certNotVerified_CertNotTrusted=Could not verify this certificate because it is not trusted. certNotVerified_IssuerNotTrusted=Could not verify this certificate because the issuer is not trusted. certNotVerified_IssuerUnknown=Could not verify this certificate because the issuer is unknown. certNotVerified_CAInvalid=Could not verify this certificate because the CA certificate is invalid. certNotVerified_Unknown=Could not verify this certificate for unknown reasons. #Client auth clientAuthMessage1=Organization: "%S" clientAuthMessage2=Issued Under: "%S" #Page Info pageInfo_SiteNotVerified=Web Site Identity Not Verified pageInfo_WebSiteVerified=Web Site Identity Verified pageInfo_Identity_Verified=The web site %S supports authentication for the page you are viewing. The identity of this web site has been verified by %S, a certificate authority you trust for this purpose. pageInfo_ViewCertificate=View the security certificate that verifies this web site's identity. pageInfo_NoEncryption=Connection Not Encrypted pageInfo_Privacy_None1=The web site %S does not support encryption for the page you are viewing. pageInfo_Privacy_None2=Information sent over the Internet without encryption can be seen by other people while it is in transit. pageInfo_Privacy_None3=The page you are viewing is not encrypted. pageInfo_StrongEncryption=Connection Encrypted: High-grade Encryption (%S %S bit) pageInfo_Privacy_Strong1=The page you are viewing was encrypted before being transmitted over the Internet. pageInfo_Privacy_Strong2=Encryption makes it very difficult for unauthorized people to view information traveling between computers. It is therefore very unlikely that anyone read this page as it traveled across the network. pageInfo_WeakEncryption=Connection Encrypted: Low-grade Encryption (%S %S bit) pageInfo_Privacy_Weak1=The web site %S is using low-grade encryption for the page you are viewing. pageInfo_Privacy_Weak2=Low-grade encryption may allow some unauthorized people to view this information. pageInfo_MixedContent=Connection Partially Encrypted pageInfo_Privacy_Mixed1=Parts of the page you are viewing were not encrypted before being transmitted over the Internet. #Cert Viewer certDetails=Certificate Viewer: notPresent= unknownIssuer= escrowFinalMessage=You should click OK only if you trust "%S" to protect your encryption private key. #Token Manager password_not_set=(not set) failed_pw_change=Unable to change Master Password. incorrect_pw=You did not enter the correct current Master Password. Please try again. pw_change_ok=Master Password successfully changed. pw_erased_ok=Warning! You have deleted your Master Password. pw_not_wanted=Warning! You have decided not to use a Master Password. pw_empty_warning=Your stored web and email passwords, form data, and private keys will not be protected. pw_change2empty_in_fips_mode=You are currently in FIPS mode. FIPS requires a non-empty Master Password. login_failed=Failed to Login loadPK11TokenDialog=Choose a PKCS#11 device to load devinfo_modname=Module devinfo_modpath=Path devinfo_label=Label devinfo_manID=Manufacturer devinfo_serialnum=Serial Number devinfo_hwversion=HW Version devinfo_fwversion=FW Version devinfo_status=Status devinfo_desc=Description devinfo_stat_disabled=Disabled devinfo_stat_notpresent=Not Present devinfo_stat_uninitialized=Uninitialized devinfo_stat_notloggedin=Not Logged In devinfo_stat_loggedin=Logged In devinfo_stat_ready=Ready enable_fips=Enable FIPS disable_fips=Disable FIPS fips_nonempty_password_required=FIPS mode requires that you have a Master Password set for each security device. Please set the password before trying to enable FIPS mode. # CRL next update. crlNextUpdateMsg1=%S cannot establish an encrypted connection with "%S". crlNextUpdateMsg2=The certificate revocation list (CRL) from "%S" needs to be updated. NoUpdateFailure=None lastFetchUrlLabel=URL originally fetched from advertisedUrlLabel=URL advertised by the CA crlAutoUpdateDayCntError=Number of days before next update must be a number greater than zero. crlAutoUpdtaeFreqCntError=Frequency of update must be a number greater than zero. disabledStatement=Automatic Update is not enabled for this CRL. enabledStatement=Automatic Update is enabled for this CRL. crlAutoupdateQuestion1=Would you like to enable automatic update? crlAutoupdateQuestion2=Would you like to view the automatic update settings? undefinedValStr= undefinedURL=Auto update URL is not defined. yesButton=Yes noButton=No resetPasswordConfirmationTitle=Reset Master Password resetPasswordConfirmationMessage=Your password has been reset. crlAutoupdateEnabled=Enabled crlAutoupdateNotEnabled=Not Enabled crlAutoupdateOk=OK crlAutoupdateFailed=Failed crlImportNewCRLTitle=Import Certificate Revocation List crlImportNewCRLLabel=Import the CRL from: #Import certificate(s) file dialog importEmailCertPrompt=Select File containing somebody's Email certificate to import importCACertsPrompt=Select File containing CA certificate(s) to import importWebSiteCertPrompt=Select File containing Web Site certificate to import file_browse_Certificate_spec=Certificate Files # Form Signing confirmation prompt formSigningIntro=The site '%S' has requested that you sign the following text message: # Cert export SaveCertAs=Save Certificate To File CertFormatBase64=X.509 Certificate (PEM) CertFormatBase64Chain=X.509 Certificate with chain (PEM) CertFormatDER=X.509 Certificate (DER) CertFormatPKCS7=X.509 Certificate (PKCS#7) CertFormatPKCS7Chain=X.509 Certificate with chain (PKCS#7) writeFileFailure=File Error writeFileFailed=Can't write to file %S:\n%S. writeFileAccessDenied=Access denied writeFileIsLocked=File is locked writeFileNoDeviceSpace=No space left on device writeFileUnknownError=Unknown error #Add Security Exception dialog addExceptionBrandedWarning=You are about to override how %S identifies sites. addExceptionInvalidHeader=This site attempts to identity itself with invalid information. addExceptionDomainMismatchShort=Wrong Site addExceptionDomainMismatchLong=Certificate belongs to a different site, which could indicate an identity theft. addExceptionExpiredShort=Outdated Information addExceptionExpiredLong=Certificate is not currently valid. It is impossible to verify whether this identity was reported as stolen or lost. addExceptionUnverifiedShort=Unknown Identity addExceptionUnverifiedLong=Certificate is not trusted, because it hasn't been verified by a recognized authority. addExceptionValidShort=Valid Certificate addExceptionValidLong=This site provides valid, verified identification. There is no need to add an exception. addExceptionCheckingShort=Checking Information addExceptionCheckingLong=Attempting to identify the site... addExceptionNoCertShort=No Information Available addExceptionNoCertLong=Unable to obtain identification status for the given site. addExceptionConnectionFailed=Connection Failed