/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Bill Law * IBM Corp. * Rich Walsh * Masayuki Nakano * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #ifdef MOZ_OS2_HIGH_MEMORY // os2safe.h has to be included before os2.h, needed for high mem #include #endif #define INCL_PM #define INCL_GPI #define INCL_DOS #define INCL_DOSERRORS #include #include "nsStringSupport.h" #include "nsNativeAppSupportBase.h" #include "nsNativeAppSupportOS2.h" #include "nsICmdLineService.h" #include "nsCOMPtr.h" #include "nsIComponentManager.h" #include "nsComponentManagerUtils.h" #include "nsIServiceManager.h" #include "nsServiceManagerUtils.h" #include "nsICmdLineHandler.h" #include "nsIDOMWindow.h" #include "nsXPCOM.h" #include "nsISupportsPrimitives.h" #include "nsISupportsArray.h" #include "nsIWindowWatcher.h" #include "nsPIDOMWindow.h" #include "nsIDOMChromeWindow.h" #include "nsIBrowserDOMWindow.h" #include "nsIDocShell.h" #include "nsIBaseWindow.h" #include "nsIWidget.h" #include "nsIAppShellService.h" #include "nsIAppStartup.h" #include "nsIProfileInternal.h" #include "nsIXULWindow.h" #include "nsIInterfaceRequestor.h" #include "nsIInterfaceRequestorUtils.h" #include "nsIPrefBranch.h" #include "nsIPrefService.h" #include "nsIPromptService.h" #include "nsNetCID.h" #include "nsIIOService.h" #include "nsIURI.h" #include "nsIObserverService.h" #include "nsXPFEComponentsCID.h" #include "nsIURIFixup.h" #include "nsCDefaultURIFixup.h" // These are needed to load a URL in a browser window. #include "nsIDOMLocation.h" #include "nsIJSContextStack.h" #include "nsIWindowMediator.h" #include "nsPaletteOS2.h" #include #include #include #include "prprf.h" // getting from nsAppRunner. Use to help track down arguments. extern char **__argv; extern int *__pargc; /* trying to keep this like Window's COPYDATASTRUCT, but a compiler error is * forcing me to add chBuff so that we can append the data to the end of the * structure */ typedef struct _COPYDATASTRUCT { ULONG dwData; ULONG cbData; PVOID lpData; CHAR chBuff; }COPYDATASTRUCT, *PCOPYDATASTRUCT; #define WM_COPYDATA (WM_USER + 60) char szCommandLine[2*CCHMAXPATH]; static HWND hwndForDOMWindow( nsISupports * ); static nsresult GetMostRecentWindow(const PRUnichar* aType, nsIDOMWindowInternal** aWindow) { nsresult rv; nsCOMPtr med( do_GetService( NS_WINDOWMEDIATOR_CONTRACTID, &rv ) ); if ( NS_FAILED( rv ) ) return rv; if ( med ) return med->GetMostRecentWindow( aType, aWindow ); return NS_ERROR_FAILURE; } static void activateWindow( nsIDOMWindowInternal *win ) { // Try to get native window handle. HWND hwnd = hwndForDOMWindow( win ); if ( hwnd ) { /* if we are looking at a client window, then we really probably want * the frame so that we can manipulate THAT */ LONG id = WinQueryWindowUShort( hwnd, QWS_ID ); if( id == FID_CLIENT ) { hwnd = WinQueryWindow( hwnd, QW_PARENT ); } // Restore the window in case it is minimized. // Use the OS call, if possible. WinSetWindowPos( hwnd, 0L, 0L, 0L, 0L, 0L, SWP_SHOW | SWP_RESTORE | SWP_ACTIVATE ); } else { // Use internal method. win->Focus(); } } // Define this macro to 1 to get DDE debugging output. #define MOZ_DEBUG_DDE 0 #ifdef DEBUG_law #undef MOZ_DEBUG_DDE #define MOZ_DEBUG_DDE 1 #endif class nsSplashScreenOS2 : public nsISplashScreen { public: nsSplashScreenOS2(); ~nsSplashScreenOS2(); NS_IMETHOD Show(); NS_IMETHOD Hide(); // nsISupports methods NS_IMETHOD_(nsrefcnt) AddRef() { mRefCnt++; return mRefCnt; } NS_IMETHOD_(nsrefcnt) Release() { --mRefCnt; if ( !mRefCnt ) { delete this; return 0; } return mRefCnt; } NS_IMETHOD QueryInterface( const nsIID &iid, void**p ) { nsresult rv = NS_OK; if ( p ) { *p = 0; if ( iid.Equals( NS_GET_IID( nsISplashScreen ) ) ) { nsISplashScreen *result = this; *p = result; NS_ADDREF( result ); } else if ( iid.Equals( NS_GET_IID( nsISupports ) ) ) { nsISupports *result = NS_STATIC_CAST( nsISupports*, this ); *p = result; NS_ADDREF( result ); } else { rv = NS_NOINTERFACE; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } void SetDialog( HWND dlg ); void LoadBitmap(); static nsSplashScreenOS2* GetPointer( HWND dlg ); HWND mDlg; HBITMAP mBitmap; nsrefcnt mRefCnt; HDC hdcMemory; HPS hpsMemory; LONG mBitmapCX; LONG mBitmapCY; }; // class nsSplashScreenOS2 MRESULT EXPENTRY DialogProc( HWND dlg, ULONG msg, MPARAM mp1, MPARAM mp2 ); void ThreadProc (void *splashScreen); // Simple Win32 mutex wrapper. struct Mutex { Mutex( const char *name ) : mName( name ), mHandle( 0 ), mState( 0xFFFF ) { /* OS/2 named semaphores must begin with "\\SEM32\\" to be valid */ mName.Insert("\\SEM32\\", 0); APIRET rc = DosCreateMutexSem(mName.get(), &mHandle, 0, FALSE); if (rc != NO_ERROR) { #if MOZ_DEBUG_DDE printf( "CreateMutex error = 0x%08X\n", (int)rc ); #endif } } ~Mutex() { if ( mHandle ) { // Make sure we release it if we own it. Unlock(); APIRET rc = DosCloseMutexSem(mHandle); if (rc != NO_ERROR) { #if MOZ_DEBUG_DDE printf( "CloseHandle error = 0x%08X\n", (int)rc ); #endif } } } BOOL Lock( DWORD timeout ) { if ( mHandle ) { #if MOZ_DEBUG_DDE printf( "Waiting (%d msec) for DDE mutex...\n", (int)timeout ); #endif mState = DosRequestMutexSem( mHandle, timeout ); #if MOZ_DEBUG_DDE printf( "...wait complete, result = 0x%08X\n", (int)mState ); #endif return (mState == NO_ERROR); } else { return FALSE; } } void Unlock() { if ( mHandle && mState == NO_ERROR ) { #if MOZ_DEBUG_DDE printf( "Releasing DDE mutex\n" ); #endif DosReleaseMutexSem( mHandle ); mState = 0xFFFF; } } private: nsCString mName; HMTX mHandle; DWORD mState; }; /* DDE Notes * * This section describes the Win32 DDE service implementation for * SeaMonkey. DDE is used on Win32 platforms to communicate between * separate instances of seamonkey.exe (or other Mozilla-based * executables), or, between the Win32 desktop shell and SeaMonkey. * * The first instance of SeaMonkey will become the "server" and * subsequent executables (and the shell) will use DDE to send * requests to that process. The requests are DDE "execute" requests * that pass the command line arguments. * * SeaMonkey registers the DDE application "Mozilla" and currently * supports only the "WWW_OpenURL" topic. This should be reasonably * compatible with applications that interfaced with Netscape * Communicator (and its predecessors?). Note that even that topic * may not be supported in a compatible fashion as the command-line * options for SeaMonkey are different than for Communiator. * * It is imperative that at most one instance of SeaMonkey execute in * "server mode" at any one time. The "native app support" in SeaMonkey * on Win32 ensures that only the server process performs XPCOM * initialization (that is not required for subsequent client processes * to communicate with the server process). * * To guarantee that only one server starts up, a Win32 "mutex" is used * to ensure only one process executes the server-detection code. That * code consists of initializing DDE and doing a DdeConnect to SeaMonkey's * application/topic. If that connection succeeds, then a server process * must be running already. * * Otherwise, no server has started. In that case, the current process * calls DdeNameService to register that application/topic. Only at that * point does the mutex get released. * * There are a couple of subtleties that one should be aware of: * * 1. It is imperative that DdeInitialize be called only after the mutex * lock has been obtained. The reason is that at shutdown, DDE * notifications go out to all initialized DDE processes. Thus, if * the mutex is owned by a terminating intance of SeaMonkey, then * calling DdeInitialize and then WaitForSingleObject will cause the * DdeUninitialize from the terminating process to "hang" until the * process waiting for the mutex times out (and can then service the * notification that the DDE server is terminating). So, don't mess * with the sequence of things in the startup/shutdown logic. * * 2. All mutex requests are made with a reasonably long timeout value and * are designed to "fail safe" (i.e., a timeout is treated as failure). * * 3. An attempt has been made to minimize the degree to which the main * SeaMonkey application logic needs to be aware of the DDE mechanisms * implemented herein. As a result, this module surfaces a very * large-grained interface, consisting of simple start/stop methods. * As a consequence, details of certain scenarios can be "lost." * Particularly, incoming DDE requests can arrive after this module * initiates the DDE server, but before SeaMonkey is initialized to the * point where those requests can be serviced (e.g., open a browser * window to a particular URL). Since the client process sends the * request early on, it may not be prepared to respond to that error. * Thus, such situations may fail silently. The design goal is that * they fail harmlessly. Refinements on this point will be made as * details emerge (and time permits). */ /* Update 2001 March * * A significant DDE bug in Windows is causing SeaMonkey to get wedged at * startup. This is detailed in Bugzilla bug 53952 * (http://bugzilla.mozilla.org/show_bug.cgi?id=53952). * * To resolve this, we are using a new strategy: * o Use a "message window" to detect that SeaMonkey is already running and * to pass requests from a second instance back to the first; * o Run only as a "DDE server" (not as DDE client); this avoids the * problematic call to DDEConnect(). * * We still use the mutex semaphore to protect the code that detects * whether SeaMonkey is already running. */ class nsNativeAppSupportOS2 : public nsNativeAppSupportBase { public: // Overrides of base implementation. NS_IMETHOD Start( PRBool *aResult ); NS_IMETHOD Stop( PRBool *aResult ); NS_IMETHOD Quit(); NS_IMETHOD StartServerMode(); NS_IMETHOD OnLastWindowClosing(); NS_IMETHOD SetIsServerMode( PRBool isServerMode ); NS_IMETHOD EnsureProfile(nsICmdLineService* args); // The "old" Start method (renamed). NS_IMETHOD StartDDE(); // Utility function to handle a Win32-specific command line // option: "-console", which dynamically creates a Windows // console. // On OS/2, we use the return from CheckConsole to determine // whether or not to use the OS/2 specific turbo mode PRBool CheckConsole(); private: static HDDEDATA APIENTRY HandleDDENotification( ULONG idInst, USHORT uType, USHORT uFmt, HCONV hconv, HSZ hsz1, HSZ hsz2, HDDEDATA hdata, ULONG dwData1, ULONG dwData2 ); static nsresult HandleRequest( LPBYTE request, PRBool newWindow, nsIDOMWindow **aResult ); static void ParseDDEArg( HSZ args, int index, nsCString& string); static void ParseDDEArg( const char* args, int index, nsCString& aString); static void ActivateLastWindow(); static HDDEDATA CreateDDEData( DWORD value ); static HDDEDATA CreateDDEData( LPBYTE value, DWORD len ); static PRBool InitTopicStrings(); static int FindTopic( HSZ topic ); static nsresult GetCmdLineArgs( LPBYTE request, nsICmdLineService **aResult ); static nsresult OpenWindow( const char *urlstr, const nsAString& aArgs, nsIDOMWindow **aResult ); static nsresult OpenBrowserWindow( const nsAString& aArgs, PRBool newWindow, nsIDOMWindow **aResult ); static nsresult ReParent( nsISupports *window, HWND newParent ); static nsresult GetStartupURL(nsICmdLineService *args, nsCString& taskURL); static int mConversations; enum { topicOpenURL, topicActivate, topicCancelProgress, topicVersion, topicRegisterViewer, topicUnRegisterViewer, topicGetWindowInfo, // Note: Insert new values above this line!!!!! topicCount // Count of the number of real topics }; static HSZ mApplication, mTopics[ topicCount ]; static DWORD mInstance; static char *mAppName; static PRBool mInitialWindowActive; static PRBool mForceProfileStartup; static char mMutexName[]; static PRBool mUseDDE; friend struct MessageWindow; }; // nsNativeAppSupportOS2 nsSplashScreenOS2::nsSplashScreenOS2() : mDlg( 0 ), mBitmap( 0 ), mRefCnt( 0 ), hdcMemory( 0 ), hpsMemory( 0 ), mBitmapCX(0), mBitmapCY(0) { } nsSplashScreenOS2::~nsSplashScreenOS2() { #if MOZ_DEBUG_DDE printf( "splash screen dtor called\n" ); #endif // Make sure dialog is gone. Hide(); } NS_IMETHODIMP nsSplashScreenOS2::Show() { //Spawn new thread to display real splash screen. _beginthread( ThreadProc, NULL, 16384, (void *)this ); return NS_OK; } NS_IMETHODIMP nsSplashScreenOS2::Hide() { if ( mDlg ) { // Dismiss the dialog. WinPostMsg(mDlg, WM_CLOSE, 0, 0); mDlg = 0; GpiSetBitmap(hpsMemory, NULLHANDLE); if (mBitmap) { GpiDeleteBitmap(mBitmap); mBitmap = 0; } if (hdcMemory) { DevCloseDC(hdcMemory); hdcMemory = 0; } if (hpsMemory) { GpiDestroyPS(hpsMemory); hpsMemory = 0; } } return NS_OK; } HBITMAP LoadAndSetBitmapFromFile(HPS hps, PSZ pszFilename) { FILE *fp = fopen(pszFilename, "rb"); if (fp == NULL) { return NULLHANDLE; } fseek(fp, 0, SEEK_END ); ULONG cbFile = ftell(fp); if (cbFile ==0) { fclose(fp); return NULLHANDLE; } fseek(fp, 0, SEEK_SET ); PBYTE pBitmapData = (PBYTE)malloc(cbFile); fread((PVOID)pBitmapData, cbFile, 1, fp); fclose(fp); PBITMAPFILEHEADER2 pbfh2 = (PBITMAPFILEHEADER2)pBitmapData; PBITMAPINFOHEADER2 pbmp2 = NULL; switch (pbfh2->usType) { case BFT_BITMAPARRAY: /* * If this is a Bitmap-Array, adjust pointer to the normal * file header. We'll just use the first bitmap in the * array and ignore other device forms. */ pbfh2 = &(((PBITMAPARRAYFILEHEADER2) pBitmapData)->bfh2); pbmp2 = &pbfh2->bmp2; break; case BFT_BMAP: pbmp2 = &pbfh2->bmp2; break; case BFT_ICON: case BFT_POINTER: case BFT_COLORICON: case BFT_COLORPOINTER: default: break; } if (pbmp2 == NULL) { free(pBitmapData); return NULLHANDLE; } LONG lScans; if (pbmp2->cbFix == sizeof(BITMAPINFOHEADER)) lScans = (LONG) ((PBITMAPINFOHEADER)pbmp2)->cy; else lScans = pbmp2->cy; HBITMAP hbmp = GpiCreateBitmap(hps, pbmp2, 0L, NULL, NULL); if (!hbmp) { free(pBitmapData); return NULLHANDLE; } if (GpiSetBitmap(hps, hbmp) == HBM_ERROR) { GpiDeleteBitmap(hbmp); free(pBitmapData); return NULLHANDLE; } LONG lScansSet = GpiSetBitmapBits(hps, 0L, lScans, pBitmapData + pbfh2->offBits, (PBITMAPINFO2) pbmp2); free(pBitmapData); if (lScansSet != lScans) { GpiSetBitmap(hps, NULLHANDLE); GpiDeleteBitmap(hbmp); return NULLHANDLE; } return hbmp; } void nsSplashScreenOS2::LoadBitmap() { hdcMemory = DevOpenDC((HAB)0, OD_MEMORY, "*", 0L, NULL, 0L); SIZEL sizel = {0, 0}; hpsMemory = GpiCreatePS((HAB)0, hdcMemory, &sizel, PU_PELS | GPIF_DEFAULT | GPIT_MICRO | GPIA_ASSOC ); // Check for '.bmp" in same directory as executable. PPIB ppib; PTIB ptib; char fileName[CCHMAXPATH]; DosGetInfoBlocks( &ptib, &ppib); DosQueryModuleName( ppib->pib_hmte, CCHMAXPATH, fileName); int fileNameLen = strlen(fileName); if (fileNameLen >=3) { fileName[ fileNameLen - 3 ] = 0; strcat( fileName, "bmp" ); // Try to load bitmap from that file. mBitmap = LoadAndSetBitmapFromFile(hpsMemory, fileName); } if (!mBitmap) { mBitmap = GpiLoadBitmap(hpsMemory, NULL, IDB_SPLASH, 0L, 0L); GpiSetBitmap(hpsMemory, mBitmap); } BITMAPINFOHEADER bitmap; bitmap.cbFix = sizeof(BITMAPINFOHEADER); GpiQueryBitmapParameters(mBitmap, &bitmap); mBitmapCX = bitmap.cx; mBitmapCY = bitmap.cy; } MRESULT EXPENTRY DialogProc( HWND dlg, ULONG msg, MPARAM mp1, MPARAM mp2 ) { if ( msg == WM_INITDLG ) { // Store dialog handle. nsSplashScreenOS2 *splashScreen = (nsSplashScreenOS2*)mp2; if ( mp2 ) { splashScreen->SetDialog( dlg ); // Try to load customized bitmap. splashScreen->LoadBitmap(); } /* Size and center the splash screen correctly. The flags in the * dialog template do not do the right thing if the user's * machine is using large fonts. */ HBITMAP hbitmap = splashScreen->mBitmap; if ( hbitmap ) { WinSetWindowPos( dlg, HWND_TOP, WinQuerySysValue( HWND_DESKTOP, SV_CXSCREEN )/2 - splashScreen->mBitmapCX/2, WinQuerySysValue( HWND_DESKTOP, SV_CYSCREEN )/2 - splashScreen->mBitmapCY/2, splashScreen->mBitmapCX, splashScreen->mBitmapCY, SWP_ACTIVATE | SWP_MOVE | SWP_SIZE ); WinShowWindow( dlg, TRUE ); } return (MRESULT)FALSE; } else if ( msg == WM_PAINT ) { nsSplashScreenOS2 *splashScreen = (nsSplashScreenOS2*)WinQueryWindowPtr( dlg, QWL_USER ); HPS hps = WinBeginPaint (dlg, NULLHANDLE, NULL); #if 0 nsPaletteOS2::SelectGlobalPalette(hps, dlg); #endif GpiErase (hps); POINTL aptl[8] = {{0, 0}, {splashScreen->mBitmapCX, splashScreen->mBitmapCY}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}}; GpiBitBlt( hps, splashScreen->hpsMemory, 3L, aptl, ROP_SRCCOPY, 0L ); WinEndPaint( hps ); return (MRESULT)TRUE; } #if 0 else if ( msg == WM_REALIZEPALETTE ) { HPS hps = WinGetPS(dlg); nsPaletteOS2::SelectGlobalPalette(hps, dlg); WinReleasePS(hps); WinInvalidateRect( dlg, 0, TRUE); return (MRESULT)TRUE; } #endif return WinDefDlgProc (dlg, msg, mp1, mp2); } void nsSplashScreenOS2::SetDialog( HWND dlg ) { // Save dialog handle. mDlg = dlg; // Store this pointer in the dialog. WinSetWindowPtr( mDlg, QWL_USER, this ); } nsSplashScreenOS2 *nsSplashScreenOS2::GetPointer( HWND dlg ) { // Get result from dialog user data. PVOID data = WinQueryWindowPtr( dlg, QWL_USER ); return (nsSplashScreenOS2*)data; } void ThreadProc(void *splashScreen) { HAB hab = WinInitialize( 0 ); HMQ hmq = WinCreateMsgQueue( hab, 0 ); WinDlgBox( HWND_DESKTOP, HWND_DESKTOP, (PFNWP)DialogProc, NULLHANDLE, IDD_SPLASH, (MPARAM)splashScreen ); WinDestroyMsgQueue( hmq ); WinTerminate( hab ); // _endthread(); } #define TURBOD "mozturbo.exe" PRBool gAbortServer = PR_FALSE; PRBool nsNativeAppSupportOS2::CheckConsole() { CHAR pszAppPath[CCHMAXPATH]; PPIB ppib; PTIB ptib; DosGetInfoBlocks(&ptib, &ppib); DosQueryModuleName(ppib->pib_hmte, CCHMAXPATH, pszAppPath); *strrchr(pszAppPath, '\\') = '\0'; // XXX DBCS misery for ( int i = 1; i < *__pargc; i++ ) { if ( strcmp( "-turbo", __argv[i] ) == 0 || strcmp( "/turbo", __argv[i] ) == 0 || strcmp( "-server", __argv[i] ) == 0 || strcmp( "/server", __argv[i] ) == 0 ) { struct stat st; CHAR pszTurboPath[CCHMAXPATH]; strcpy(pszTurboPath, pszAppPath); strcat(pszTurboPath, "\\"); strcat(pszTurboPath, TURBOD); int statrv = stat(pszTurboPath, &st); /* If we can't find the turbo EXE, use the builtin turbo */ if (statrv == 0) { RESULTCODES rcodes; CHAR pszArgString[CCHMAXPATH]; strcpy(pszArgString, pszTurboPath); strcat(pszArgString, " -l -p "); strcat(pszArgString, pszAppPath); pszArgString[strlen(pszTurboPath)] = '\0'; DosExecPgm(NULL,0,EXEC_BACKGROUND, pszArgString, 0, &rcodes, pszTurboPath); return PR_FALSE; /* Don't start the app */ } else { // Start in server mode (and suppress splash screen). mServerMode = PR_TRUE; mShouldShowUI = PR_FALSE; __argv[i] = "-nosplash"; // Bit of a hack, but it works! // Ignore other args. break; } } } PRBool checkTurbo = PR_TRUE; for ( int j = 1; j < *__pargc; j++ ) { if (strcmp("-killAll", __argv[j]) == 0 || strcmp("/killAll", __argv[j]) == 0 || strcmp("-kill", __argv[j]) == 0 || strcmp("/kill", __argv[j]) == 0) { struct stat st; CHAR pszTurboPath[CCHMAXPATH]; strcpy(pszTurboPath, pszAppPath); strcat(pszTurboPath, "\\"); strcat(pszTurboPath, TURBOD); int statrv = stat(pszTurboPath, &st); /* If we can't find the turbo EXE, use the builtin turbo */ if (statrv == 0) { RESULTCODES rcodes; CHAR pszArgString[CCHMAXPATH]; strcpy(pszArgString, pszTurboPath); strcat(pszArgString, " -u"); pszArgString[strlen(pszTurboPath)] = '\0'; DosExecPgm(NULL,0,EXEC_BACKGROUND, pszArgString, 0, &rcodes, pszTurboPath); return PR_FALSE; /* Don't start the app */ } else { gAbortServer = PR_TRUE; } break; } if ( strcmp( "-silent", __argv[j] ) == 0 || strcmp( "/silent", __argv[j] ) == 0 ) { checkTurbo = PR_FALSE; } } // check if this is a restart of the browser after quiting from // the servermoded browser instance. if ( checkTurbo && !mServerMode ) { #if 0 HKEY key; LONG result = ::RegOpenKeyEx( HKEY_CURRENT_USER, "Software\\Microsoft\\Windows\\CurrentVersion\\Run", 0, KEY_QUERY_VALUE, &key ); if ( result == ERROR_SUCCESS ) { BYTE regvalue[_MAX_PATH]; DWORD type, len = sizeof(regvalue); result = ::RegQueryValueEx( key, NS_QUICKLAUNCH_RUN_KEY, NULL, &type, regvalue, &len); ::RegCloseKey( key ); if ( result == ERROR_SUCCESS && len > 0 ) { // Make sure the filename in the quicklaunch command matches us char fileName[_MAX_PATH]; int rv = ::GetModuleFileName( NULL, fileName, sizeof fileName ); nsCAutoString regvalueholder; regvalueholder.Assign((char *) regvalue); if ((FindInString(regvalueholder, fileName, PR_TRUE) != kNotFound) && (FindInString(regvalueholder, "-turbo", PR_TRUE) != kNotFound) ) { mServerMode = PR_TRUE; mShouldShowUI = PR_TRUE; } } } #endif } return PR_TRUE; /* Start the app */ } // Create and return an instance of class nsNativeAppSupportOS2. nsresult NS_CreateNativeAppSupport( nsINativeAppSupport **aResult ) { if ( aResult ) { nsNativeAppSupportOS2 *pNative = new nsNativeAppSupportOS2; if ( pNative ) { // Check for dynamic console creation request. // If CheckConsole returns PR_FALSE, we should // start the turbo daemon and close the app. if (pNative->CheckConsole() == PR_FALSE) { delete pNative; return NS_ERROR_FAILURE; } *aResult = pNative; NS_ADDREF( *aResult ); } else { return NS_ERROR_OUT_OF_MEMORY; } } else { return NS_ERROR_NULL_POINTER; } return NS_OK; } // Create instance of OS/2 splash screen object. nsresult NS_CreateSplashScreen( nsISplashScreen **aResult ) { /* In order to handle -splash on the command line, */ /* we use a variable to handle splash. Defaults to true. */ /* We set it to false if you have turned off the logo */ /* in OS/2, but then back to true if you specify -splash. */ BOOL doSplashScreen = TRUE; if ( aResult ) { *aResult = 0; CHAR pBuffer[3]; PrfQueryProfileString( HINI_USERPROFILE, "PM_ControlPanel", "LogoDisplayTime", "1", pBuffer, 3); if (pBuffer[0] == '0') { doSplashScreen = FALSE; } /* endif */ for ( int i = 1; i < *__pargc; i++ ) { if ( strcmp( "-quiet", __argv[i] ) == 0 || strcmp( "/quiet", __argv[i] ) == 0 ) { doSplashScreen = FALSE; } if ( strcmp( "-splash", __argv[i] ) == 0 || strcmp( "/splash", __argv[i] ) == 0 ) { doSplashScreen = TRUE; } } if (!doSplashScreen) { return NS_OK; } *aResult = new nsSplashScreenOS2; if ( *aResult ) { NS_ADDREF( *aResult ); } else { return NS_ERROR_OUT_OF_MEMORY; } } else { return NS_ERROR_NULL_POINTER; } return NS_OK; } // Constants #define MOZ_STARTUP_MUTEX_NAME "StartupMutex" #define MOZ_DDE_START_TIMEOUT 30000 #define MOZ_DDE_STOP_TIMEOUT 15000 #define MOZ_DDE_EXEC_TIMEOUT 15000 // The array entries must match the enum ordering! const char * const topicNames[] = { "WWW_OpenURL", "WWW_Activate", "WWW_CancelProgress", "WWW_Version", "WWW_RegisterViewer", "WWW_UnRegisterViewer", "WWW_GetWindowInfo" }; // Static member definitions. int nsNativeAppSupportOS2::mConversations = 0; HSZ nsNativeAppSupportOS2::mApplication = 0; HSZ nsNativeAppSupportOS2::mTopics[nsNativeAppSupportOS2::topicCount] = { 0 }; DWORD nsNativeAppSupportOS2::mInstance = 0; PRBool nsNativeAppSupportOS2::mInitialWindowActive = PR_FALSE; PRBool nsNativeAppSupportOS2::mForceProfileStartup = PR_FALSE; // Added this as pmddeml has no api like this int DdeCmpStringHandles( HSZ hsz1, HSZ hsz2 ) { char chhsz1[CCHMAXPATH], chhsz2[CCHMAXPATH]; int rc = -1; /* I am assuming that the strings will never be more that CCHMAXPATH in * length. Safe bet (for now). To find true length, call WinDdeQueryString * and pass in (hsz, NULL, 0L, 0) and it will return iLength. Passing 0 * for codepage will use the codepage of the current thread. */ WinDdeQueryString( hsz1, chhsz1, sizeof( chhsz1 ), 0 ); WinDdeQueryString( hsz2, chhsz2, sizeof( chhsz2 ),0 ); rc = stricmp( chhsz1, chhsz2 ); return(rc); } char *GetCommandLine() { /* This function is meant to be like the Window's GetCommandLine() function. * The value returned by pPIB->pib_pchcmd is of the format: * \0. So the first string is the * .exe and the second string is what followed on the command line. Dorky, * but I guess it'll have to do. */ PTIB pTIB = NULL; PPIB pPIB = NULL; APIRET rc = NO_ERROR; char *pchParam = NULL; rc = DosGetInfoBlocks( &pTIB, &pPIB ); if( rc == NO_ERROR ) { INT iLen = 0; char *pchTemp = NULL; pchParam = pPIB->pib_pchcmd; strcpy( szCommandLine, pchParam ); iLen = strlen( pchParam ); /* szCommandLine[iLen] is '\0', so see what's next. Probably be another * '\0', a space or start of the arguments */ pchTemp = &(pchParam[iLen+1]); /* At this point, szCommandLine holds just the program name. Now we * go for the parameters. If our next value is a space, ignore it * and go for the next character */ if( *pchTemp ) { szCommandLine[iLen] = ' '; iLen++; if( *pchTemp == ' ' ) { pchTemp++; } strcpy( &(szCommandLine[iLen]), pchTemp ); } } return( szCommandLine ); } typedef struct _DDEMLFN { PFN *fn; ULONG ord; } DDEMLFN, *PDDEMLFN; DDEMLFN ddemlfnTable[] = { { (PFN *)&WinDdeAbandonTransaction ,100 }, { (PFN *)&WinDdeAccessData ,101 }, { (PFN *)&WinDdeAddData ,102 }, { (PFN *)&WinDdeSubmitTransaction ,103 }, { (PFN *)&WinDdeCompareStringHandles ,104 }, { (PFN *)&WinDdeConnect ,105 }, { (PFN *)&WinDdeConnectList ,106 }, { (PFN *)&WinDdeCreateDataHandle ,107 }, { (PFN *)&WinDdeCreateStringHandle ,108 }, { (PFN *)&WinDdeDisconnect ,109 }, { (PFN *)&WinDdeDisconnectList ,110 }, { (PFN *)&WinDdeEnableCallback ,111 }, { (PFN *)&WinDdeFreeDataHandle ,112 }, { (PFN *)&WinDdeFreeStringHandle ,113 }, { (PFN *)&WinDdeGetData ,114 }, { (PFN *)&WinDdeInitialize ,116 }, { (PFN *)&WinDdeKeepStringHandle ,117 }, { (PFN *)&WinDdeNameService ,118 }, { (PFN *)&WinDdePostAdvise ,119 }, { (PFN *)&WinDdeQueryConvInfo ,120 }, { (PFN *)&WinDdeQueryNextServer ,121 }, { (PFN *)&WinDdeQueryString ,122 }, { (PFN *)&WinDdeReconnect ,123 }, { (PFN *)&WinDdeSetUserHandle ,124 }, { (PFN *)&WinDdeUninitialize ,126 }, { (PFN *)NULL , 0 } }; /* SetupOS2ddeml makes sure that we can get pointers to all of the DDEML * functions in demlfnTable using entrypoints. If we can't find one of them * or can't load pmddeml.dll, then returns FALSE */ BOOL SetupOS2ddeml() { BOOL bRC = FALSE; HMODULE hmodDDEML = NULLHANDLE; APIRET rc = NO_ERROR; rc = DosLoadModule( NULL, 0, "PMDDEML", &hmodDDEML ); if( rc == NO_ERROR ) { int i; /* all of this had better work. Get ready to be a success! */ bRC = TRUE; for( i=0; ddemlfnTable[i].ord != 0; i++ ) { rc = DosQueryProcAddr( hmodDDEML, ddemlfnTable[i].ord, NULL, ddemlfnTable[i].fn ); if( rc != NO_ERROR ) { /* we're horked. Return rc = horked */ bRC = FALSE; break; } } } /* load PMDDEML */ return( bRC ); } char nsNativeAppSupportOS2::mMutexName[ 128 ] = { 0 }; // Message window encapsulation. struct MessageWindow { // ctor/dtor are simplistic MessageWindow() { // Try to find window. HATOMTBL hatomtbl; HENUM henum; HWND hwndNext; char classname[CCHMAXPATH]; mHandle = NULLHANDLE; hatomtbl = WinQuerySystemAtomTable(); mMsgWindowAtom = WinFindAtom(hatomtbl, className()); if (mMsgWindowAtom == 0) { // If there is not atom in the system table for this class name, then // we can assume that the app is not currently running. mMsgWindowAtom = WinAddAtom(hatomtbl, className()); } else { // Found an existing atom for this class name. Cycle through existing // windows and see if one with our window id and class name already // exists henum = WinBeginEnumWindows(HWND_OBJECT); while ((hwndNext = WinGetNextWindow(henum)) != NULLHANDLE) { if (WinQueryWindowUShort(hwndNext, QWS_ID) == (USHORT)mMsgWindowAtom) { WinQueryClassName(hwndNext, CCHMAXPATH, classname); if (strcmp(classname, className()) == 0) { mHandle = hwndNext; break; } } } } } HWND getHWND() { return mHandle; } // Class name: appName + "MessageWindow" static const char *className() { static char classNameBuffer[128]; static char *mClassName = 0; if ( !mClassName ) { sprintf( classNameBuffer, "%s%s", nsNativeAppSupportOS2::mAppName, "MessageWindow" ); mClassName = classNameBuffer; } return mClassName; } // Create: Register class and create window. NS_IMETHOD Create() { // Register the window class. NS_ENSURE_TRUE( WinRegisterClass( 0, className(), (PFNWP)&MessageWindow::WindowProc, 0L, 0 ), NS_ERROR_FAILURE ); /* Giving a size but offscreen so that won't be seen, even if all * goes wrong. Giving a size so that can be seen and understood by * tools */ const char * pszClassName = className(); mHandle = WinCreateWindow( HWND_OBJECT, pszClassName, NULL, // name WS_DISABLED, // style 0,0, // x, y 0,0, // cx,cy HWND_DESKTOP,// owner HWND_BOTTOM, // hwndbehind (USHORT)mMsgWindowAtom, // id NULL, // pCtlData NULL ); // pres params #if MOZ_DEBUG_DDE printf( "Message window = 0x%08X\n", (int)mHandle ); #endif return NS_OK; } // Destory: Get rid of window and reset mHandle. NS_IMETHOD Destroy() { nsresult retval = NS_OK; if ( mHandle ) { HATOMTBL hatomtbl = WinQuerySystemAtomTable(); WinDeleteAtom(hatomtbl, mMsgWindowAtom); // DestroyWindow can only destroy windows created from // the same thread. BOOL desRes = WinDestroyWindow( mHandle ); if ( FALSE != desRes ) { mHandle = NULL; } else { retval = NS_ERROR_FAILURE; } } return retval; } // SendRequest: Pass string via WM_COPYDATA to message window. NS_IMETHOD SendRequest( const char *cmd ) { /* Nothing like WM_COPYDATA in OS/2, where the OS allows pointers to be * passed to a different process and automatically accessible by that * process. So we have to create shared mem on our side and then the * process that gets the WM_COPYDATA message has to do a * DosGetSharedMem on this pointer to be able to access the data */ COPYDATASTRUCT *pcds; APIRET rc = NO_ERROR; PVOID pvData = NULL; ULONG ulSize = sizeof(COPYDATASTRUCT)+strlen(cmd)+1; #ifdef MOZ_OS2_HIGH_MEMORY rc = DosAllocSharedMem( &pvData, NULL, ulSize, PAG_COMMIT | PAG_READ | PAG_WRITE | OBJ_GETTABLE | OBJ_ANY); if( rc != NO_ERROR ) // Did the kernel handle OBJ_ANY? { // Try again without OBJ_ANY and if the first failure was not caused // by OBJ_ANY then we will get the same failure, else we have taken // care of pre-FP13 systems where the kernel couldn't handle it. rc = DosAllocSharedMem( &pvData, NULL, ulSize, PAG_COMMIT | PAG_READ | PAG_WRITE | OBJ_GETTABLE); } #else rc = DosAllocSharedMem( &pvData, NULL, ulSize, PAG_COMMIT | PAG_READ | PAG_WRITE | OBJ_GETTABLE); #endif if( rc != NO_ERROR ) { /* don't even try doing anything else. Windows doesn't worry about * errors so I guess that we shouldn't either */ return NS_OK; } memset( pvData, '\0', ulSize ); pcds = (COPYDATASTRUCT *)(pvData); pcds->dwData = 0; pcds->cbData = strlen(cmd)+1; /* put the data in the buffer space immediately after the * COPYDATASTRUCT */ pcds->lpData = &(pcds->chBuff); if( cmd ) { strcpy( (char *)pcds->lpData, cmd ); } WinSendMsg( mHandle, WM_COPYDATA, 0, (MPARAM)pcds ); DosFreeMem( pvData ); return NS_OK; } // Window proc. static MRESULT EXPENTRY WindowProc( HWND msgWindow, ULONG msg, MPARAM wp, MPARAM lp ) { MRESULT rc = (MRESULT)TRUE; if ( msg == WM_COPYDATA ) { // This is an incoming request. COPYDATASTRUCT *cds = (COPYDATASTRUCT*)lp; DosGetSharedMem( (PVOID)cds, PAG_READ|PAG_WRITE ); #if MOZ_DEBUG_DDE printf( "Incoming request: %s\n", (const char*)cds->lpData ); #endif // Get current window and return its window handle. nsCOMPtr win; (void)nsNativeAppSupportOS2::HandleRequest( (LPBYTE)cds->lpData, PR_FALSE, getter_AddRefs( win ) ); return win ? (MRESULT)hwndForDOMWindow( win ) : 0; } /* We have to return a FALSE from WM_CREATE or this window will never * get off of the ground */ else if ( msg == WM_CREATE ) { rc = (MRESULT)FALSE; } return rc; } private: HWND mHandle; USHORT mMsgWindowAtom; }; // struct MessageWindow static char nameBuffer[128] = { 0 }; char *nsNativeAppSupportOS2::mAppName = nameBuffer; PRBool nsNativeAppSupportOS2::mUseDDE = PR_FALSE; /* Start: Tries to find the "message window" to determine if it * exists. If so, then SeaMonkey is already running. In that * case, we use the handle to the "message" window and send * a request corresponding to this process's command line * options. * * If not, then this is the first instance of SeaMonkey. In * that case, we create and set up the message window. * * The checking for existance of the message window must * be protected by use of a mutex semaphore. */ NS_IMETHODIMP nsNativeAppSupportOS2::Start( PRBool *aResult ) { NS_ENSURE_ARG( aResult ); NS_ENSURE_TRUE( mInstance == 0, NS_ERROR_NOT_INITIALIZED ); nsresult rv = NS_ERROR_FAILURE; *aResult = PR_FALSE; // see if DDE should be enabled AND remove OS/2-specific // options the app's commandline handler won't recognize // (-console was handled earlier by StartOS2App()) for (int i = 1; i < *__pargc; i++ ) { if (stricmp("-dde", __argv[i]) == 0 || stricmp("/dde", __argv[i]) == 0) mUseDDE = PR_TRUE; else if (stricmp("-console", __argv[i]) != 0 && stricmp("/console", __argv[i]) != 0) continue; for (int j = i; j < *__pargc; j++) __argv[j] = __argv[j+1]; (*__pargc)--; i--; } // if this is a standalone instance, turn off DDE regardless of the // commandline, then skip out before we look for another instance if (getenv("MOZ_NO_REMOTE")) { mUseDDE = PR_FALSE; *aResult = PR_TRUE; return NS_OK; } // Grab mutex first. int retval; UINT id = ID_DDE_APPLICATION_NAME; retval = WinLoadString( NULLHANDLE, NULLHANDLE, id, sizeof(nameBuffer), nameBuffer ); if ( retval == 0 ) { // No app name; just keep running. *aResult = PR_TRUE; return NS_OK; } // Build mutex name from app name. PR_snprintf( mMutexName, sizeof mMutexName, "%s%s", nameBuffer, MOZ_STARTUP_MUTEX_NAME ); Mutex startupLock = Mutex( mMutexName ); NS_ENSURE_TRUE( startupLock.Lock( MOZ_DDE_START_TIMEOUT ), NS_ERROR_FAILURE ); /* We need to have a message queue to do the MessageWindow stuff (for both * Create() and SendRequest()). If we don't have one, make it now. * If we are going to end up going away right after ::Start() returns, * then make sure to clean up the message queue. */ MQINFO mqinfo; HAB hab = NULLHANDLE; HMQ hmqCurrent = WinQueryQueueInfo( HMQ_CURRENT, &mqinfo, sizeof( MQINFO ) ); if( !hmqCurrent ) { hab = WinInitialize( 0 ); hmqCurrent = WinCreateMsgQueue( hab, 0 ); } // Search for existing message window. MessageWindow msgWindow; if ( msgWindow.getHWND() ) { // We are a client process. Pass request to message window. char *cmd = GetCommandLine(); rv = msgWindow.SendRequest( cmd ); } else { // We will be server. if (!gAbortServer) { rv = msgWindow.Create(); if ( NS_SUCCEEDED( rv ) ) { if (mUseDDE) { // Start up DDE server. this->StartDDE(); } // Tell caller to spin message loop. *aResult = PR_TRUE; } } } startupLock.Unlock(); if( *aResult == PR_FALSE ) { /* This process isn't going to continue much longer. Make sure that we * clean up the message queue */ if (hmqCurrent) WinDestroyMsgQueue(hmqCurrent); if (hab) WinTerminate(hab); } return rv; } PRBool nsNativeAppSupportOS2::InitTopicStrings() { for ( int i = 0; i < topicCount; i++ ) { if ( !( mTopics[ i ] = WinDdeCreateStringHandle( (PSZ)topicNames[ i ], CP_WINANSI ) ) ) { return PR_FALSE; } } return PR_TRUE; } int nsNativeAppSupportOS2::FindTopic( HSZ topic ) { for ( int i = 0; i < topicCount; i++ ) { if ( DdeCmpStringHandles( topic, mTopics[i] ) == 0 ) { return i; } } return -1; } // Start DDE server. // // This used to be the Start() method when we were using DDE as the // primary IPC mechanism between secondary SeaMonkey processes and the // initial "server" process. // // Now, it simply initializes the DDE server. The caller must check // that this process is to be the server, and, must acquire the DDE // startup mutex semaphore prior to calling this routine. See ::Start(), // above. NS_IMETHODIMP nsNativeAppSupportOS2::StartDDE() { NS_ENSURE_TRUE( mInstance == 0, NS_ERROR_NOT_INITIALIZED ); /* Get entrypoints for PMDDEML */ BOOL bDDEML = SetupOS2ddeml(); /* If we couldn't initialize DDEML, set mUSEDDE to PR_FALSE */ /* so we don't do anything else DDE related */ if (!bDDEML) { mUseDDE = PR_FALSE; return NS_OK; } // Initialize DDE. NS_ENSURE_TRUE( DDEERR_NO_ERROR == WinDdeInitialize( &mInstance, nsNativeAppSupportOS2::HandleDDENotification, APPCLASS_STANDARD, 0 ), NS_ERROR_FAILURE ); // Allocate DDE strings. NS_ENSURE_TRUE( ( mApplication = WinDdeCreateStringHandle( mAppName, CP_WINANSI ) ) && InitTopicStrings(), NS_ERROR_FAILURE ); // Next step is to register a DDE service. NS_ENSURE_TRUE( WinDdeNameService( mInstance, mApplication, 0, DNS_REGISTER ), NS_ERROR_FAILURE ); #if MOZ_DEBUG_DDE printf( "DDE server started\n" ); #endif return NS_OK; } // If no DDE conversations are pending, terminate DDE. NS_IMETHODIMP nsNativeAppSupportOS2::Stop( PRBool *aResult ) { NS_ENSURE_ARG( aResult ); NS_ENSURE_TRUE( mInstance, NS_ERROR_NOT_INITIALIZED ); nsresult rv = NS_OK; *aResult = PR_TRUE; if (!mUseDDE) { return rv; } Mutex ddeLock( mMutexName ); if ( ddeLock.Lock( MOZ_DDE_STOP_TIMEOUT ) ) { if ( mConversations == 0 ) { this->Quit(); } else { *aResult = PR_FALSE; } ddeLock.Unlock(); } else { // No DDE application name specified, but that's OK. Just // forge ahead. *aResult = PR_TRUE; } return rv; } // Terminate DDE regardless. NS_IMETHODIMP nsNativeAppSupportOS2::Quit() { // If another process wants to look for the message window, they need // to wait to hold the lock, in which case they will not find the // window as we will destroy ours under our lock. // When the mutex goes off the stack, it is unlocked via destructor. Mutex mutexLock(mMutexName); NS_ENSURE_TRUE(mutexLock.Lock(MOZ_DDE_START_TIMEOUT), NS_ERROR_FAILURE ); // If we've got a message window to receive IPC or new window requests, // get rid of it as we are shutting down. // Note: Destroy calls DestroyWindow, which will only work on a window // created by the same thread. MessageWindow mw; mw.Destroy(); if ( mInstance ) { // Unregister application name. WinDdeNameService( mInstance, mApplication, 0, DNS_UNREGISTER ); // Clean up strings. if ( mApplication ) { WinDdeFreeStringHandle( mApplication ); mApplication = 0; } for ( int i = 0; i < topicCount; i++ ) { if ( mTopics[i] ) { WinDdeFreeStringHandle( mTopics[i] ); mTopics[i] = 0; } } WinDdeUninitialize( mInstance ); mInstance = 0; } return NS_OK; } PRBool NS_CanRun() { return PR_FALSE; /* We do this so that we can bail if we are using custom turbo mode */ } #if MOZ_DEBUG_DDE // Macro to generate case statement for a given XTYP value. #define XTYP_CASE(t) \ case t: result = #t; break static nsCString uTypeDesc( UINT uType ) { nsCString result; switch ( uType ) { XTYP_CASE(XTYP_ADVSTART); XTYP_CASE(XTYP_CONNECT); XTYP_CASE(XTYP_ADVREQ); XTYP_CASE(XTYP_REQUEST); XTYP_CASE(XTYP_WILDCONNECT); XTYP_CASE(XTYP_ADVDATA); XTYP_CASE(XTYP_EXECUTE); XTYP_CASE(XTYP_POKE); XTYP_CASE(XTYP_ADVSTOP); XTYP_CASE(XTYP_CONNECT_CONFIRM); XTYP_CASE(XTYP_DISCONNECT); XTYP_CASE(XTYP_ERROR); XTYP_CASE(XTYP_MONITOR); XTYP_CASE(XTYP_REGISTER); XTYP_CASE(XTYP_XACT_COMPLETE); XTYP_CASE(XTYP_UNREGISTER); default: result = "XTYP_?????"; } return result; } static nsCString hszValue( DWORD instance, HSZ hsz ) { // Extract string from HSZ. nsCString result("["); DWORD len = WinDdeQueryString( hsz, NULL, NULL, CP_WINANSI ); if ( len ) { char buffer[ 256 ]; WinDdeQueryString( hsz, buffer, sizeof buffer, CP_WINANSI ); result += buffer; } result += "]"; return result; } #endif // Utility function to escape double-quotes within a string. static void escapeQuotes( nsString &aString ) { PRInt32 offset = -1; while( 1 ) { // Find next '"'. offset = FindCharInString( aString, '"', ++offset ); if ( offset == kNotFound ) { // No more quotes, exit. break; } else { // Insert back-slash ahead of the '"'. aString.Insert( PRUnichar('\\'), offset ); // Increment offset because we just inserted a slash offset++; } } return; } HDDEDATA APIENTRY nsNativeAppSupportOS2::HandleDDENotification( ULONG idInst, // DDEML instance USHORT uType, // transaction type USHORT uFmt, // clipboard data format HCONV hconv, // handle to the conversation HSZ hsz1, // handle to a string HSZ hsz2, // handle to a string HDDEDATA hdata, // handle to a global memory object ULONG dwData1, // transaction-specific data ULONG dwData2 ) { // transaction-specific data #if MOZ_DEBUG_DDE printf( "DDE: uType =%s\n", uTypeDesc( uType ).get() ); printf( " uFmt =%u\n", (unsigned)uFmt ); printf( " hconv =%08x\n", (int)hconv ); printf( " hsz1 =%08x:%s\n", (int)hsz1, hszValue( mInstance, hsz1 ).get() ); printf( " hsz2 =%08x:%s\n", (int)hsz2, hszValue( mInstance, hsz2 ).get() ); printf( " hdata =%08x\n", (int)hdata ); printf( " dwData1=%08x\n", (int)dwData1 ); printf( " dwData2=%08x\n", (int)dwData2 ); #endif HDDEDATA result = 0; if ( uType & XCLASS_BOOL ) { switch ( uType ) { case XTYP_CONNECT: // Make sure its for our service/topic. if ( FindTopic( hsz1 ) != -1 ) { // We support this connection. result = (HDDEDATA)1; } break; case XTYP_CONNECT_CONFIRM: // We don't care about the conversation handle, at this point. result = (HDDEDATA)1; break; } } else if ( uType & XCLASS_DATA ) { if ( uType == XTYP_REQUEST ) { switch ( FindTopic( hsz1 ) ) { case topicOpenURL: { // Open a given URL... // Default is to open in current window. PRBool new_window = PR_FALSE; // Get the URL from the first argument in the command. nsCAutoString url; ParseDDEArg(hsz2, 0, url); // Read the 3rd argument in the command to determine if a // new window is to be used. nsCAutoString windowID; ParseDDEArg(hsz2, 2, windowID); // "0" means to open the URL in a new window. if ( windowID.Equals( "0" ) ) { new_window = PR_TRUE; } // Make it look like command line args. url.Insert( NS_STRINGIFY(MOZ_APP_NAME) " -url ", 0 ); #if MOZ_DEBUG_DDE printf( "Handling dde XTYP_REQUEST request: [%s]...\n", url.get() ); #endif // Now handle it. nsCOMPtr win; HandleRequest( LPBYTE( url.get() ), new_window, getter_AddRefs( win ) ); // Return pseudo window ID. result = CreateDDEData( 1 ); break; } case topicGetWindowInfo: { // This topic has to get the current URL, get the current // page title and then format the output into the DDE // return string. The return value is "URL","Page Title", // "Window ID" however the window ID is not used for this // command, therefore it is returned as a null string // This isn't really a loop. We just use "break" // statements to bypass the remaining steps when // something goes wrong. do { // Get most recently used Nav window. nsCOMPtr navWin; GetMostRecentWindow( NS_LITERAL_STRING( "navigator:browser" ).get(), getter_AddRefs( navWin ) ); if ( !navWin ) { // There is not a window open break; } // Get content window. nsCOMPtr content; navWin->GetContent( getter_AddRefs( content ) ); if ( !content ) { break; } // Convert that to internal interface. nsCOMPtr internalContent( do_QueryInterface( content ) ); if ( !internalContent ) { break; } // Get location. nsCOMPtr location; internalContent->GetLocation( getter_AddRefs( location ) ); if ( !location ) { break; } // Get href for URL. nsAutoString url; if ( NS_FAILED( location->GetHref( url ) ) ) { break; } // Escape any double-quotes. escapeQuotes( url ); // Now for the title; first, get the "window" script global object. nsCOMPtr scrWin( do_QueryInterface( internalContent ) ); if ( !scrWin ) { break; } // Then from its doc shell get the base window... nsCOMPtr baseWindow = do_QueryInterface( scrWin->GetDocShell() ); if ( !baseWindow ) { break; } // And from the base window we can get the title. nsXPIDLString title; if(!baseWindow) { break; } baseWindow->GetTitle(getter_Copies(title)); // Escape any double-quotes in the title. escapeQuotes( title ); // Use a string buffer for the output data, first // save a quote. nsCAutoString outpt( NS_LITERAL_CSTRING("\"") ); // Now copy the URL converting the Unicode string // to a single-byte ASCII string outpt.Append( NS_LossyConvertUTF16toASCII( url ) ); // Add the "," used to separate the URL and the page // title outpt.Append( NS_LITERAL_CSTRING("\",\"") ); // Now copy the current page title to the return string outpt.Append( NS_LossyConvertUTF16toASCII( title )); // Fill out the return string with the remainin ","" outpt.Append( NS_LITERAL_CSTRING( "\",\"\"" )); // Create a DDE handle to a char string for the data // being returned, this copies and creates a "shared" // copy of the DDE response until the calling APP // reads it and says it can be freed. result = CreateDDEData( (LPBYTE)(const char*)outpt.get(), outpt.Length() + 1 ); #if MOZ_DEBUG_DDE printf( "WWW_GetWindowInfo->%s\n", outpt.get() ); #endif } while ( PR_FALSE ); break; } case topicActivate: { // Activate a Nav window... nsCAutoString windowID; ParseDDEArg(hsz2, 0, windowID); // 4294967295 is decimal for 0xFFFFFFFF which is also a // correct value to do that Activate last window stuff if ( windowID.Equals( "-1" ) || windowID.Equals( "4294967295" ) ) { // We only support activating the most recent window (or a new one). ActivateLastWindow(); // Return pseudo window ID. result = CreateDDEData( 1 ); } break; } case topicVersion: { // Return version. We're restarting at 1.0! DWORD version = 1 << 16; // "1.0" result = CreateDDEData( version ); break; } case topicRegisterViewer: { // Register new viewer (not implemented). result = CreateDDEData( PR_FALSE ); break; } case topicUnRegisterViewer: { // Unregister new viewer (not implemented). result = CreateDDEData( PR_FALSE ); break; } default: break; } } else if ( uType & XTYP_POKE ) { switch ( FindTopic( hsz1 ) ) { case topicCancelProgress: { // "Handle" progress cancel (actually, pretty much ignored). result = (HDDEDATA)DDE_FACK; break; } default: break; } } } else if ( uType & XCLASS_FLAGS ) { if ( uType == XTYP_EXECUTE ) { // Prove that we received the request. DWORD bytes; LPBYTE request = (LPBYTE)WinDdeAccessData( hdata, &bytes ); #if MOZ_DEBUG_DDE printf( "Handling dde request: [%s]...\n", (char*)request ); #endif // Default is to open in current window. PRBool new_window = PR_FALSE; nsCAutoString url; ParseDDEArg((const char*) request, 0, url); // Read the 3rd argument in the command to determine if a // new window is to be used. nsCAutoString windowID; ParseDDEArg((const char*) request, 2, windowID); // "0" means to open the URL in a new window. if ( windowID.Equals( "0" ) ) { new_window = PR_TRUE; } // Make it look like command line args. url.Insert( NS_STRINGIFY(MOZ_APP_NAME) " -url ", 0 ); #if MOZ_DEBUG_DDE printf( "Handling dde XTYP_REQUEST request: [%s]...\n", url.get() ); #endif // Now handle it. nsCOMPtr win; HandleRequest( LPBYTE( url.get() ), new_window, getter_AddRefs( win ) ); // Release the data. // DdeUnaccessData( hdata ); result = (HDDEDATA)DDE_FACK; } else { result = (HDDEDATA)DDE_NOTPROCESSED; } } else if ( uType & XCLASS_NOTIFICATION ) { } #if MOZ_DEBUG_DDE printf( "DDE result=%d (0x%08X)\n", (int)result, (int)result ); #endif return result; } // Utility function to advance to end of quoted string. // p+offset must point to the comma preceding the arg on entry. // On return, p+result points to the closing '"' (or end of the string // if the closing '"' is missing) if the arg is quoted. If the arg // is not quoted, then p+result will point to the first character // of the arg. static PRInt32 advanceToEndOfQuotedArg( const char *p, PRInt32 offset, PRInt32 len ) { // Check whether the current arg is quoted. if ( p[++offset] == '"' ) { // Advance past the closing quote. while ( offset < len && p[++offset] != '"' ) { // If the current character is a backslash, then the // next character can't be a *real* '"', so skip it. if ( p[offset] == '\\' ) { offset++; } } } return offset; } void nsNativeAppSupportOS2::ParseDDEArg( const char* args, int index, nsCString& aString) { if ( args ) { int argLen = strlen(args); nsDependentCString temp(args, argLen); // offset points to the comma preceding the desired arg. PRInt32 offset = -1; // Skip commas till we get to the arg we want. while( index-- ) { // If this arg is quoted, then go to closing quote. offset = advanceToEndOfQuotedArg( args, offset, argLen); // Find next comma. offset = FindCharInString( temp, ',', offset ); if ( offset == kNotFound ) { // No more commas, give up. aString = args; return; } } // The desired argument starts just past the preceding comma, // which offset points to, and extends until the following // comma (or the end of the string). // // Since the argument might be enclosed in quotes, we need to // deal with that before searching for the terminating comma. // We advance offset so it ends up pointing to the start of // the argument we want. PRInt32 end = advanceToEndOfQuotedArg( args, offset++, argLen ); // Find next comma (or end of string). end = FindCharInString( temp, ',', end ); if ( end == kNotFound ) { // Arg is the rest of the string. end = argLen; } // Extract result. aString.Assign( args + offset, end - offset ); } return; } // Utility to parse out argument from a DDE item string. void nsNativeAppSupportOS2::ParseDDEArg( HSZ args, int index, nsCString& aString) { DWORD argLen = WinDdeQueryString( args, NULL, NULL, CP_WINANSI ); // there wasn't any string, so return empty string if ( !argLen ) return; // Ensure result's buffer is sufficiently big. char *temp = (char *) malloc(argLen + 1); if ( !temp ) return; // Now get the string contents. WinDdeQueryString( args, temp, argLen + 1, CP_WINANSI ); // Parse out the given arg. ParseDDEArg(temp, index, aString); free(temp); } void nsNativeAppSupportOS2::ActivateLastWindow() { nsCOMPtr navWin; GetMostRecentWindow( NS_LITERAL_STRING("navigator:browser").get(), getter_AddRefs( navWin ) ); if ( navWin ) { // Activate that window. activateWindow( navWin ); } else { // Need to create a Navigator window, then. nsCOMPtr newWin; OpenBrowserWindow( NS_LITERAL_STRING( "about:blank" ), PR_TRUE, getter_AddRefs( newWin ) ); } } HDDEDATA nsNativeAppSupportOS2::CreateDDEData( DWORD value ) { return CreateDDEData( (LPBYTE)&value, sizeof value ); } HDDEDATA nsNativeAppSupportOS2::CreateDDEData( LPBYTE value, DWORD len ) { HDDEDATA result = WinDdeCreateDataHandle( value, len, 0, mApplication, CF_TEXT, 0 ); return result; } // Handle external request. The first argument is the command line // received from the external client. We convert that string to an // nsICmdLineService object via GetCmdLineArgs. Then, we look for certain // well-known arguments. This replicates code elsewhere, to some extent, // unfortunately (if you can fix that, please do). The second argument may // be set to PR_TRUE to override the user's external link preference. nsresult nsNativeAppSupportOS2::HandleRequest( LPBYTE request, PRBool newWindow, nsIDOMWindow **aResult ) { // if initial hidden window is still being displayed, we need to ignore requests // because such requests might not function properly. See bug 147223 for details if (mInitialWindowActive) { return NS_ERROR_FAILURE; } // Parse command line. nsCOMPtr args; nsresult rv; rv = GetCmdLineArgs( request, getter_AddRefs( args ) ); if (NS_FAILED(rv)) return rv; nsCOMPtr appStartup (do_GetService(NS_APPSTARTUP_CONTRACTID, &rv)); if (NS_FAILED(rv)) return rv; nsCOMPtr nativeApp; rv = appStartup->GetNativeAppSupport(getter_AddRefs( nativeApp )); if (NS_FAILED(rv)) return rv; // first see if there is a url nsXPIDLCString arg; rv = args->GetURLToLoad(getter_Copies(arg)); if (NS_FAILED(rv)) return rv; if (!arg.IsEmpty() ) { // Launch browser. #if MOZ_DEBUG_DDE printf( "Launching browser on url [%s]...\n", arg.get() ); #endif rv = nativeApp->EnsureProfile(args); if (NS_SUCCEEDED(rv)) { nsAutoString tmpArg; NS_CopyNativeToUnicode( arg, tmpArg ); rv = OpenBrowserWindow( tmpArg, newWindow, aResult ); } return rv; } // ok, let's try the -chrome argument rv = args->GetCmdLineValue("-chrome", getter_Copies(arg)); if (NS_SUCCEEDED(rv) && (const char*)arg ) { // Launch chrome. #if MOZ_DEBUG_DDE printf( "Launching chrome url [%s]...\n", (const char*)arg ); #endif rv = nativeApp->EnsureProfile(args); if (NS_SUCCEEDED(rv)) rv = OpenWindow( arg.get(), EmptyString(), aResult ); return rv; } // try for the "-profilemanager" argument, in which case we want the // profile manager to appear, but only if there are no windows open rv = args->GetCmdLineValue( "-profilemanager", getter_Copies(arg)); if ( NS_SUCCEEDED(rv) && (const char*)arg ) { // -profilemanager on command line nsCOMPtr window; GetMostRecentWindow(0, getter_AddRefs(window)); if (!window) { // there are no open windows mForceProfileStartup = PR_TRUE; } } // try for the "-kill" argument, to shut down the server rv = args->GetCmdLineValue( "-kill", getter_Copies(arg)); if ( NS_SUCCEEDED(rv) && (const char*)arg ) { // Turn off server mode. nsCOMPtr appStartup (do_GetService(NS_APPSTARTUP_CONTRACTID, &rv)); if (NS_FAILED(rv)) return rv; nsCOMPtr native; rv = appStartup->GetNativeAppSupport( getter_AddRefs( native )); if (NS_SUCCEEDED(rv)) { native->SetIsServerMode( PR_FALSE ); // close app if there are no more top-level windows. rv = appStartup->Quit(nsIAppStartup::eConsiderQuit); } return rv; } // Try standard startup's command-line handling logic from nsAppRunner.cpp... // Need profile before opening windows. rv = nativeApp->EnsureProfile(args); if (NS_FAILED(rv)) return rv; // This will tell us whether the command line processing opened a window. PRBool windowOpened = PR_FALSE; // Process command line options. rv = DoCommandLines( args, &windowOpened ); // If a window was opened, then we're done. // Note that we keep on trying in the unlikely event of an error. if (rv == NS_ERROR_NOT_AVAILABLE || rv == NS_ERROR_ABORT || windowOpened) { return NS_OK; } // ok, no idea what the param is. #if MOZ_DEBUG_DDE printf( "Unknown request [%s]\n", (char*) request ); #endif // if all else fails, open a browser window const char * const contractID = "@mozilla.org/commandlinehandler/general-startup;1?type=browser"; nsCOMPtr handler = do_GetService(contractID, &rv); if (NS_FAILED(rv)) return rv; nsXPIDLString defaultArgs; rv = handler->GetDefaultArgs(getter_Copies(defaultArgs)); if (NS_FAILED(rv) || defaultArgs.IsEmpty()) return rv; NS_ConvertUTF16toUTF8 url( defaultArgs ); return OpenBrowserWindow(defaultArgs, newWindow, aResult); } // Parse command line args according to MS spec // (see "Parsing C++ Command-Line Arguments" at // http://msdn.microsoft.com/library/devprods/vs6/visualc/vclang/_pluslang_parsing_c.2b2b_.command.2d.line_arguments.htm). nsresult nsNativeAppSupportOS2::GetCmdLineArgs( LPBYTE request, nsICmdLineService **aResult ) { nsresult rv = NS_OK; int justCounting = 1; char **argv = 0; // Flags, etc. int between = 1, quoted = 0, bSlashCount = 0; int argc = 0; char *p = (char*)request; nsCAutoString arg; // We loop if we've not finished the second pass through. while ( 1 ) { if ( between ) { // We are traversing whitespace between args. // Check for start of next arg. if ( *p != 0 && !isspace( *p ) ) { // Start of another arg. between = 0; arg = ""; switch ( *p ) { case '\\': // Count the backslash. bSlashCount = 1; break; case '"': // Remember we're inside quotes. quoted = 1; break; default: // Add character to arg. arg += *p; break; } } else { // Another space between args, ignore it. } } else { // We are processing the contents of an argument. // Check for whitespace or end. if ( *p == 0 || ( !quoted && isspace( *p ) ) ) { // Process pending backslashes (interpret them // literally since they're not followed by a "). while( bSlashCount ) { arg += '\\'; bSlashCount--; } // End current arg. if ( !justCounting ) { argv[argc] = new char[ arg.Length() + 1 ]; strcpy( argv[argc], arg.get() ); } argc++; // We're now between args. between = 1; } else { // Still inside argument, process the character. switch ( *p ) { case '"': // First, digest preceding backslashes (if any). while ( bSlashCount > 1 ) { // Put one backsplash in arg for each pair. arg += '\\'; bSlashCount -= 2; } if ( bSlashCount ) { // Quote is literal. arg += '"'; bSlashCount = 0; } else { // Quote starts or ends a quoted section. if ( quoted ) { // Check for special case of consecutive double // quotes inside a quoted section. if ( *(p+1) == '"' ) { // This implies a literal double-quote. Fake that // out by causing next double-quote to look as // if it was preceded by a backslash. bSlashCount = 1; } else { quoted = 0; } } else { quoted = 1; } } break; case '\\': // Add to count. bSlashCount++; break; default: // Accept any preceding backslashes literally. while ( bSlashCount ) { arg += '\\'; bSlashCount--; } // Just add next char to the current arg. arg += *p; break; } } } // Check for end of input. if ( *p ) { // Go to next character. p++; } else { // If on first pass, go on to second. if ( justCounting ) { // Allocate argv array. argv = new char*[ argc ]; // Start second pass, initialize again justCounting = 0; p = (char*)request; between = 1; argc = quoted = bSlashCount = 0; } else { // Quit. break; } } } nsCOMPtr compMgr; NS_GetComponentManager(getter_AddRefs(compMgr)); rv = compMgr->CreateInstanceByContractID( NS_COMMANDLINESERVICE_CONTRACTID, nsnull, NS_GET_IID(nsICmdLineService), (void**) aResult); if ( NS_FAILED( rv ) || NS_FAILED( ( rv = (*aResult)->Initialize( argc, argv ) ) ) ) { #if MOZ_DEBUG_DDE printf( "Error creating command line service = 0x%08X (argc=%d, argv=0x%08X)\n", (int)rv, (int)argc, (int)argv ); #endif } // Cleanup. while ( argc ) { delete [] argv[ --argc ]; } delete [] argv; return rv; } // Check to see if we have a profile. We will not have a profile // at this point if we were launched invisibly in -turbo mode, and // the profile mgr needed to show UI (to pick from multiple profiles). // At this point, we can show UI, so call DoProfileStartUp(). nsresult nsNativeAppSupportOS2::EnsureProfile(nsICmdLineService* args) { nsresult rv; nsCOMPtr profileMgr(do_GetService(NS_PROFILE_CONTRACTID, &rv)); if (NS_FAILED(rv)) return rv; nsCOMPtr appStartup(do_GetService(NS_APPSTARTUP_CONTRACTID, &rv)); if (NS_FAILED(rv)) return rv; // If we have a profile, everything is fine. // unless mForceProfileStartup is TRUE. This flag is set when the // last window is closed in -turbo mode. When TRUE, it forces the // profile UI to come up at the beginning of the next -turbo session // even if we currently have a profile. PRBool haveProfile; rv = profileMgr->IsCurrentProfileAvailable(&haveProfile); if (!mForceProfileStartup && NS_SUCCEEDED(rv) && haveProfile) return NS_OK; // If the profile selection is happening, fail. PRBool doingProfileStartup; rv = profileMgr->GetIsStartingUp(&doingProfileStartup); if (NS_FAILED(rv) || doingProfileStartup) return NS_ERROR_FAILURE; // See if profile manager is being suppressed via -silent flag. PRBool canInteract = PR_TRUE; nsXPIDLCString arg; if (NS_SUCCEEDED(args->GetCmdLineValue("-silent", getter_Copies(arg)))) { if (!arg.IsEmpty()) { canInteract = PR_FALSE; } } rv = appStartup->DoProfileStartup(args, canInteract); mForceProfileStartup = PR_FALSE; return rv; } nsresult nsNativeAppSupportOS2::OpenWindow( const char *urlstr, const nsAString& aArgs, nsIDOMWindow **aResult ) { nsresult rv = NS_ERROR_FAILURE; nsCOMPtr wwatch(do_GetService(NS_WINDOWWATCHER_CONTRACTID)); nsCOMPtr sarg(do_CreateInstance(NS_SUPPORTS_STRING_CONTRACTID)); if (sarg) sarg->SetData(aArgs); if (wwatch && sarg) { rv = wwatch->OpenWindow(0, urlstr, "_blank", "chrome,dialog=no,all", sarg, aResult); #if MOZ_DEBUG_DDE } else { printf("Get WindowWatcher (or create string) failed\n"); #endif } return rv; } HWND hwndForDOMWindow( nsISupports *window ) { nsCOMPtr win( do_QueryInterface(window) ); if ( !win ) { return 0; } nsCOMPtr ppBaseWindow = do_QueryInterface( win->GetDocShell() ); if ( !ppBaseWindow ) { return 0; } nsCOMPtr ppWidget; ppBaseWindow->GetMainWidget( getter_AddRefs( ppWidget ) ); return (HWND)( ppWidget->GetNativeData( NS_NATIVE_WIDGET ) ); } nsresult nsNativeAppSupportOS2::ReParent( nsISupports *window, HWND newParent ) { HWND hMainClient = hwndForDOMWindow( window ); if ( !hMainClient ) { return NS_ERROR_FAILURE; } HWND hMainFrame = WinQueryWindow(hMainClient, QW_PARENT); // Reset the parent. WinSetParent( hMainFrame, newParent, FALSE ); return NS_OK; } static const char sJSStackContractID[] = "@mozilla.org/js/xpc/ContextStack;1"; class SafeJSContext { public: SafeJSContext(); ~SafeJSContext(); nsresult Push(); JSContext *get() { return mContext; } protected: nsCOMPtr mService; JSContext *mContext; }; SafeJSContext::SafeJSContext() : mContext(nsnull) { } SafeJSContext::~SafeJSContext() { JSContext *cx; nsresult rv; if(mContext) { rv = mService->Pop(&cx); NS_ASSERTION(NS_SUCCEEDED(rv) && cx == mContext, "JSContext push/pop mismatch"); } } nsresult SafeJSContext::Push() { if (mContext) // only once return NS_ERROR_FAILURE; mService = do_GetService(sJSStackContractID); if(mService) { JSContext *cx; if (NS_SUCCEEDED(mService->GetSafeJSContext(&cx)) && cx && NS_SUCCEEDED(mService->Push(cx))) { // Save cx in mContext to indicate need to pop. mContext = cx; } } return mContext ? NS_OK : NS_ERROR_FAILURE; } nsresult nsNativeAppSupportOS2::OpenBrowserWindow( const nsAString& aArgs, PRBool newWindow, nsIDOMWindow **aResult ) { nsresult rv = NS_OK; // Open the argument URL according to the external link preference. // If there is no Nav window, or newWindow is PR_TRUE, open a new one. // Get most recently used Nav window. nsCOMPtr navWin; GetMostRecentWindow( NS_LITERAL_STRING( "navigator:browser" ).get(), getter_AddRefs( navWin ) ); // This isn't really a loop. We just use "break" statements to fall // out to the OpenWindow call when things go awry. do { // If caller requires a new window, then don't use an existing one. if ( newWindow ) { break; } if ( !navWin ) { // Have to open a new one. break; } nsCOMPtr chromeWin( do_QueryInterface( navWin ) ); if ( !chromeWin ) { break; } nsCOMPtr bwin; chromeWin->GetBrowserDOMWindow( getter_AddRefs( bwin ) ); if ( !bwin ) { break; } nsCOMPtr fixup( do_GetService( NS_URIFIXUP_CONTRACTID ) ); if ( !fixup ) { break; } nsCOMPtr uri; rv = fixup->CreateFixupURI( NS_ConvertUTF16toUTF8( aArgs ), nsIURIFixup::FIXUP_FLAG_NONE, getter_AddRefs( uri ) ); if ( NS_FAILED(rv) || !uri ) { break; } return bwin->OpenURI( uri, nsnull, nsIBrowserDOMWindow::OPEN_DEFAULTWINDOW, nsIBrowserDOMWindow::OPEN_EXTERNAL, aResult ); } while ( PR_FALSE ); nsCOMPtr handler(do_GetService("@mozilla.org/commandlinehandler/general-startup;1?type=browser", &rv)); if (NS_FAILED(rv)) return rv; nsXPIDLCString chromeUrlForTask; rv = handler->GetChromeUrlForTask(getter_Copies(chromeUrlForTask)); if (NS_FAILED(rv)) return rv; // Last resort is to open a brand new window. return OpenWindow( chromeUrlForTask.get(), aArgs, aResult ); } // This opens a special browser window for purposes of priming the pump for // server mode (getting stuff into the caching, loading .dlls, etc.). The // window will have these attributes: // - Load about:blank (no home page) // - No toolbar (so there's no sidebar panels loaded, either) // - Pass magic arg to cause window to close in onload handler. NS_IMETHODIMP nsNativeAppSupportOS2::StartServerMode() { if (mShouldShowUI) { // We don't have to anything anymore. The native UI // will create the window return NS_OK; } else { // Sometimes a window will have been opened even though mShouldShowUI is false // (e.g., "seamonkey -mail -turbo"). Detect that by testing whether there's a // window already open. nsCOMPtr win; GetMostRecentWindow( 0, getter_AddRefs( win ) ); if ( win ) { // Window already opened, don't need this special Nav window. return NS_OK; } } // Since native UI won't create any window, we create a hidden window // so thing work alright. // Create some of the objects we'll need. nsCOMPtr ww(do_GetService(NS_WINDOWWATCHER_CONTRACTID)); nsCOMPtr arg1(do_CreateInstance(NS_SUPPORTS_STRING_CONTRACTID)); nsCOMPtr arg2(do_CreateInstance(NS_SUPPORTS_STRING_CONTRACTID)); if ( !ww || !arg1 || !arg2 ) { return NS_OK; } // Create the array for the arguments. nsCOMPtr argArray = do_CreateInstance(NS_SUPPORTSARRAY_CONTRACTID); if ( !argArray ) { return NS_OK; } // arg1 is the url to load. // arg2 is the string that tells navigator.js to auto-close. arg1->SetData( NS_LITERAL_STRING( "about:blank" ) ); arg2->SetData( NS_LITERAL_STRING( "turbo=yes" ) ); // Put args into array. if ( NS_FAILED( argArray->AppendElement( arg1 ) ) || NS_FAILED( argArray->AppendElement( arg2 ) ) ) { return NS_OK; } // Now open the window. nsCOMPtr newWindow; ww->OpenWindow( 0, "chrome://navigator/content", "_blank", "chrome,dialog=no,toolbar=no", argArray, getter_AddRefs( newWindow ) ); if ( !newWindow ) { return NS_OK; } mInitialWindowActive = PR_TRUE; // Hide this window by re-parenting it (to ensure it doesn't appear). ReParent( newWindow, MessageWindow().getHWND() ); return NS_OK; } NS_IMETHODIMP nsNativeAppSupportOS2::SetIsServerMode( PRBool isServerMode ) { return nsNativeAppSupportBase::SetIsServerMode( isServerMode ); } NS_IMETHODIMP nsNativeAppSupportOS2::OnLastWindowClosing() { if ( !mServerMode ) return NS_OK; // If the last window closed is our special "turbo" window made // in StartServerMode(), don't do anything. if ( mInitialWindowActive ) { mInitialWindowActive = PR_FALSE; return NS_OK; } // If the last window closed is our confirmation dialog, // don't do anything. if ( mLastWindowIsConfirmation ) { mLastWindowIsConfirmation = PR_FALSE; return NS_OK; } nsresult rv; // If activated by the browser.turbo.singleProfileOnly pref, // check for multi-profile situation and turn off turbo mode // if there are multiple profiles. PRBool singleProfileOnly = PR_FALSE; nsCOMPtr prefService( do_GetService( NS_PREFSERVICE_CONTRACTID, &rv ) ); if ( NS_SUCCEEDED( rv ) ) { prefService->GetBoolPref( "browser.turbo.singleProfileOnly", &singleProfileOnly ); } if ( singleProfileOnly ) { nsCOMPtr profileMgr( do_GetService( NS_PROFILE_CONTRACTID, &rv ) ); if ( NS_SUCCEEDED( rv ) ) { PRInt32 profileCount = 0; if ( NS_SUCCEEDED( profileMgr->GetProfileCount( &profileCount ) ) && profileCount > 1 ) { // Turn off turbo mode and quit the application. SetIsServerMode( PR_FALSE ); nsCOMPtr appStartup (do_GetService(NS_APPSTARTUP_CONTRACTID, &rv)); if ( NS_SUCCEEDED( rv ) ) { appStartup->Quit(nsIAppStartup::eAttemptQuit); } return NS_OK; } } } if ( !mShownTurboDialog ) { PRBool showDialog = PR_TRUE; if ( NS_SUCCEEDED( rv ) ) prefService->GetBoolPref( "browser.turbo.showDialog", &showDialog ); if ( showDialog ) { /* show turbo dialog, unparented. at this point in the application shutdown process the last window is largely torn down and unsuitable for parenthood. */ nsCOMPtr wwatch(do_GetService(NS_WINDOWWATCHER_CONTRACTID)); if ( wwatch ) { nsCOMPtr newWindow; mShownTurboDialog = PR_TRUE; mLastWindowIsConfirmation = PR_TRUE; rv = wwatch->OpenWindow(0, "chrome://navigator/content/turboDialog.xul", "_blank", "chrome,modal,titlebar,centerscreen,dialog", 0, getter_AddRefs(newWindow)); } } } nsCOMPtr appStartup (do_GetService(NS_APPSTARTUP_CONTRACTID, &rv)); if ( NS_SUCCEEDED( rv ) ) { // Instead of staying alive, launch a new instance of the application and then // terminate for real. We take steps to ensure that the new instance will run // as a "server process" and not try to pawn off its request back on this // instance. // Grab mutex. Process termination will release it. Mutex mutexLock = Mutex(mMutexName); NS_ENSURE_TRUE(mutexLock.Lock(MOZ_DDE_START_TIMEOUT), NS_ERROR_FAILURE ); // Turn off MessageWindow so the other process can't see us. MessageWindow mw; mw.Destroy(); // Launch another instance. PPIB ppib; PTIB ptib; char filename[CCHMAXPATH]; char buffer[CCHMAXPATH]; DosGetInfoBlocks(&ptib, &ppib); DosQueryModuleName(ppib->pib_hmte, CCHMAXPATH, filename); strcpy(buffer, filename); // The new process must run in turbo mode (no splash screen, no window, etc.). strcat(buffer, " -turbo"); // Now do the OS/2 stuff... RESULTCODES resultcodes; CHAR szLoadError[CCHMAXPATH]; buffer[strlen(buffer)] = '\0'; buffer[strlen(buffer)+1] = '\0'; buffer[strlen(filename)] = '\0'; DosExecPgm(szLoadError, sizeof(szLoadError), EXEC_ASYNCRESULT, buffer, NULL, &resultcodes, buffer); #ifndef XP_OS2 STARTUPINFO startupInfo; ::GetStartupInfo( &startupInfo ); PROCESS_INFORMATION processInfo; DWORD rc = ::CreateProcess( 0, (LPTSTR)cmdLine.get(), 0, 0, 0, 0, 0, 0, &startupInfo, &processInfo ); #endif // Turn off turbo mode and quit the application. SetIsServerMode( PR_FALSE ); appStartup->Quit(nsIAppStartup::eAttemptQuit); // Done. This app will now commence shutdown. } return NS_OK; } // This is a public function called by nsAppRunner.cpp. Its primary // purpose is to determine if any commandline options require a VIO // ("console") window. If so and one isn't present, it will restart // the app in a VIO session. It is intended to be called as early as // possible during startup and before any other commandline processing. // It returns TRUE if the current instance should continue running and // FALSE if it should terminate upon this function's return. PRBool StartOS2App( int aArgc, char **aArgv) { PRBool rv = PR_TRUE; PPIB ppib; PTIB ptib; DosGetInfoBlocks(&ptib, &ppib); // if this isn't a PM session, reset the session type to enable use // of PM functions; if it is PM, look for args that require a VIO // session - however, ignore them if any of the turbo-mode args are // also present (why restart as VIO just to launch a detached process) if (ppib->pib_ultype != SSF_TYPE_PM) ppib->pib_ultype = SSF_TYPE_PM; else { for (int i = 1; i < aArgc; i++ ) { char *arg = aArgv[i]; if (*arg != '-' && *arg != '/') continue; arg++; // as soon as we find a turbo-mode arg, we're done; OTOH, if we // find a VIO-mode arg, keep looking so we don't miss a turbo arg if (stricmp("turbo", arg) == 0 || stricmp("server", arg) == 0 || stricmp("kill", arg) == 0 || stricmp("killall", arg) == 0) { rv = PR_TRUE; break; } else { if (stricmp("?", arg) == 0 || stricmp("h", arg) == 0 || stricmp("v", arg) == 0 || stricmp("help", arg) == 0 || stricmp("version", arg) == 0 || stricmp("console", arg) == 0) rv = PR_FALSE; } } } // if the session type is OK, increase the number of // file handles available to the app, then exit if (rv) { ULONG ulMaxFH = 0; LONG ulReqCount = 0; DosSetRelMaxFH(&ulReqCount, &ulMaxFH); if (ulMaxFH < 256) DosSetMaxFH(256); return rv; } // the app has to be restarted in a VIO session char szErrObj[64] = ""; STARTDATA x; memset(&x, 0, sizeof(x)); x.Length = sizeof(x); x.InheritOpt = SSF_INHERTOPT_PARENT; x.SessionType = SSF_TYPE_WINDOWABLEVIO; x.PgmControl = SSF_CONTROL_NOAUTOCLOSE; x.ObjectBuffer = szErrObj; x.ObjectBuffLen = sizeof(szErrObj); // the f/q exename is the string preceding ppib->pib_pchcmd; // the original commandline is the string following it char * ptr = ppib->pib_pchcmd - 2; while (*ptr) ptr--; x.PgmName = ptr + 1; x.PgmInputs = strchr(ppib->pib_pchcmd, 0) + 1; // restart the app; if this session is in the background, trying // to start in the foreground will produce an error, but the app // will still start; if DosStartSession has a real failure, forget // the console and let the current instance keep running ULONG ulSession; PID pid; ULONG rc = DosStartSession(&x, &ulSession, &pid); if (rc && rc != ERROR_SMG_START_IN_BACKGROUND) rv = PR_TRUE; return rv; }