/* * This file is PRIVATE to SSL and should be the first thing included by * any SSL implementation file. * * ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is the Netscape security libraries. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1994-2000 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Dr Stephen Henson * Dr Vipul Gupta , Sun Microsystems Laboratories * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ /* $Id: sslimpl.h,v 1.76 2010/02/04 03:08:45 wtc%google.com Exp $ */ #ifndef __sslimpl_h_ #define __sslimpl_h_ #ifdef DEBUG #undef NDEBUG #else #undef NDEBUG #define NDEBUG #endif #include "secport.h" #include "secerr.h" #include "sslerr.h" #include "ssl3prot.h" #include "hasht.h" #include "nssilock.h" #include "pkcs11t.h" #if defined(XP_UNIX) || defined(XP_BEOS) #include "unistd.h" #endif #include "nssrwlk.h" #include "prthread.h" #include "sslt.h" /* for some formerly private types, now public */ /* to make some of these old enums public without namespace pollution, ** it was necessary to prepend ssl_ to the names. ** These #defines preserve compatibility with the old code here in libssl. */ typedef SSLKEAType SSL3KEAType; typedef SSLMACAlgorithm SSL3MACAlgorithm; typedef SSLSignType SSL3SignType; #define sign_null ssl_sign_null #define sign_rsa ssl_sign_rsa #define sign_dsa ssl_sign_dsa #define sign_ecdsa ssl_sign_ecdsa #define calg_null ssl_calg_null #define calg_rc4 ssl_calg_rc4 #define calg_rc2 ssl_calg_rc2 #define calg_des ssl_calg_des #define calg_3des ssl_calg_3des #define calg_idea ssl_calg_idea #define calg_fortezza ssl_calg_fortezza /* deprecated, must preserve */ #define calg_aes ssl_calg_aes #define calg_camellia ssl_calg_camellia #define calg_seed ssl_calg_seed #define mac_null ssl_mac_null #define mac_md5 ssl_mac_md5 #define mac_sha ssl_mac_sha #define hmac_md5 ssl_hmac_md5 #define hmac_sha ssl_hmac_sha #define SET_ERROR_CODE /* reminder */ #define SEND_ALERT /* reminder */ #define TEST_FOR_FAILURE /* reminder */ #define DEAL_WITH_FAILURE /* reminder */ #if defined(DEBUG) || defined(TRACE) #ifdef __cplusplus #define Debug 1 #else extern int Debug; #endif #else #undef Debug #endif #if defined(DEBUG) && !defined(TRACE) && !defined(NISCC_TEST) #define TRACE #endif #ifdef TRACE #define SSL_TRC(a,b) if (ssl_trace >= (a)) ssl_Trace b #define PRINT_BUF(a,b) if (ssl_trace >= (a)) ssl_PrintBuf b #define DUMP_MSG(a,b) if (ssl_trace >= (a)) ssl_DumpMsg b #else #define SSL_TRC(a,b) #define PRINT_BUF(a,b) #define DUMP_MSG(a,b) #endif #ifdef DEBUG #define SSL_DBG(b) if (ssl_debug) ssl_Trace b #else #define SSL_DBG(b) #endif #ifdef macintosh #include "pprthred.h" #else #include "private/pprthred.h" /* for PR_InMonitor() */ #endif #define ssl_InMonitor(m) PZ_InMonitor(m) #define LSB(x) ((unsigned char) ((x) & 0xff)) #define MSB(x) ((unsigned char) (((unsigned)(x)) >> 8)) /************************************************************************/ typedef enum { SSLAppOpRead = 0, SSLAppOpWrite, SSLAppOpRDWR, SSLAppOpPost, SSLAppOpHeader } SSLAppOperation; #define SSL_MIN_MASTER_KEY_BYTES 5 #define SSL_MAX_MASTER_KEY_BYTES 64 #define SSL2_SESSIONID_BYTES 16 #define SSL3_SESSIONID_BYTES 32 #define SSL_MIN_CHALLENGE_BYTES 16 #define SSL_MAX_CHALLENGE_BYTES 32 #define SSL_CHALLENGE_BYTES 16 #define SSL_CONNECTIONID_BYTES 16 #define SSL_MIN_CYPHER_ARG_BYTES 0 #define SSL_MAX_CYPHER_ARG_BYTES 32 #define SSL_MAX_MAC_BYTES 16 #define SSL3_RSA_PMS_LENGTH 48 #define SSL3_MASTER_SECRET_LENGTH 48 /* number of wrap mechanisms potentially used to wrap master secrets. */ #define SSL_NUM_WRAP_MECHS 16 /* This makes the cert cache entry exactly 4k. */ #define SSL_MAX_CACHED_CERT_LEN 4060 #define NUM_MIXERS 9 /* Mask of the 25 named curves we support. */ #ifndef NSS_ECC_MORE_THAN_SUITE_B #define SSL3_SUPPORTED_CURVES_MASK 0x3800000 /* only 3 curves, suite B*/ #else #define SSL3_SUPPORTED_CURVES_MASK 0x3fffffe #endif #ifndef BPB #define BPB 8 /* Bits Per Byte */ #endif #define EXPORT_RSA_KEY_LENGTH 64 /* bytes */ typedef struct sslBufferStr sslBuffer; typedef struct sslConnectInfoStr sslConnectInfo; typedef struct sslGatherStr sslGather; typedef struct sslSecurityInfoStr sslSecurityInfo; typedef struct sslSessionIDStr sslSessionID; typedef struct sslSocketStr sslSocket; typedef struct sslSocketOpsStr sslSocketOps; typedef struct ssl3StateStr ssl3State; typedef struct ssl3CertNodeStr ssl3CertNode; typedef struct ssl3BulkCipherDefStr ssl3BulkCipherDef; typedef struct ssl3MACDefStr ssl3MACDef; typedef struct ssl3KeyPairStr ssl3KeyPair; struct ssl3CertNodeStr { struct ssl3CertNodeStr *next; CERTCertificate * cert; }; typedef SECStatus (*sslHandshakeFunc)(sslSocket *ss); /* This type points to the low layer send func, ** e.g. ssl2_SendStream or ssl3_SendPlainText. ** These functions return the same values as PR_Send, ** i.e. >= 0 means number of bytes sent, < 0 means error. */ typedef PRInt32 (*sslSendFunc)(sslSocket *ss, const unsigned char *buf, PRInt32 n, PRInt32 flags); typedef void (*sslSessionIDCacheFunc) (sslSessionID *sid); typedef void (*sslSessionIDUncacheFunc)(sslSessionID *sid); typedef sslSessionID *(*sslSessionIDLookupFunc)(const PRIPv6Addr *addr, unsigned char* sid, unsigned int sidLen, CERTCertDBHandle * dbHandle); /* registerable callback function that either appends extension to buffer * or returns length of data that it would have appended. */ typedef PRInt32 (*ssl3HelloExtensionSenderFunc)(sslSocket *ss, PRBool append, PRUint32 maxBytes); /* registerable callback function that handles a received extension, * of the given type. */ typedef SECStatus (* ssl3HelloExtensionHandlerFunc)(sslSocket *ss, PRUint16 ex_type, SECItem * data); /* row in a table of hello extension senders */ typedef struct { PRInt32 ex_type; ssl3HelloExtensionSenderFunc ex_sender; } ssl3HelloExtensionSender; /* row in a table of hello extension handlers */ typedef struct { PRInt32 ex_type; ssl3HelloExtensionHandlerFunc ex_handler; } ssl3HelloExtensionHandler; extern SECStatus ssl3_RegisterServerHelloExtensionSender(sslSocket *ss, PRUint16 ex_type, ssl3HelloExtensionSenderFunc cb); extern PRInt32 ssl3_CallHelloExtensionSenders(sslSocket *ss, PRBool append, PRUint32 maxBytes, const ssl3HelloExtensionSender *sender); /* Socket ops */ struct sslSocketOpsStr { int (*connect) (sslSocket *, const PRNetAddr *); PRFileDesc *(*accept) (sslSocket *, PRNetAddr *); int (*bind) (sslSocket *, const PRNetAddr *); int (*listen) (sslSocket *, int); int (*shutdown)(sslSocket *, int); int (*close) (sslSocket *); int (*recv) (sslSocket *, unsigned char *, int, int); /* points to the higher-layer send func, e.g. ssl_SecureSend. */ int (*send) (sslSocket *, const unsigned char *, int, int); int (*read) (sslSocket *, unsigned char *, int); int (*write) (sslSocket *, const unsigned char *, int); int (*getpeername)(sslSocket *, PRNetAddr *); int (*getsockname)(sslSocket *, PRNetAddr *); }; /* Flags interpreted by ssl send functions. */ #define ssl_SEND_FLAG_FORCE_INTO_BUFFER 0x40000000 #define ssl_SEND_FLAG_NO_BUFFER 0x20000000 #define ssl_SEND_FLAG_MASK 0x7f000000 /* ** A buffer object. */ struct sslBufferStr { unsigned char * buf; unsigned int len; unsigned int space; }; /* ** SSL3 cipher suite policy and preference struct. */ typedef struct { #if !defined(_WIN32) unsigned int cipher_suite : 16; unsigned int policy : 8; unsigned int enabled : 1; unsigned int isPresent : 1; #else ssl3CipherSuite cipher_suite; PRUint8 policy; unsigned char enabled : 1; unsigned char isPresent : 1; #endif } ssl3CipherSuiteCfg; #ifdef NSS_ENABLE_ECC #define ssl_V3_SUITES_IMPLEMENTED 50 #else #define ssl_V3_SUITES_IMPLEMENTED 30 #endif /* NSS_ENABLE_ECC */ typedef struct sslOptionsStr { unsigned int useSecurity : 1; /* 1 */ unsigned int useSocks : 1; /* 2 */ unsigned int requestCertificate : 1; /* 3 */ unsigned int requireCertificate : 2; /* 4-5 */ unsigned int handshakeAsClient : 1; /* 6 */ unsigned int handshakeAsServer : 1; /* 7 */ unsigned int enableSSL2 : 1; /* 8 */ unsigned int enableSSL3 : 1; /* 9 */ unsigned int enableTLS : 1; /* 10 */ unsigned int noCache : 1; /* 11 */ unsigned int fdx : 1; /* 12 */ unsigned int v2CompatibleHello : 1; /* 13 */ unsigned int detectRollBack : 1; /* 14 */ unsigned int noStepDown : 1; /* 15 */ unsigned int bypassPKCS11 : 1; /* 16 */ unsigned int noLocks : 1; /* 17 */ unsigned int enableSessionTickets : 1; /* 18 */ unsigned int enableDeflate : 1; /* 19 */ unsigned int enableRenegotiation : 2; /* 20-21 */ unsigned int requireSafeNegotiation : 1; /* 22 */ } sslOptions; typedef enum { sslHandshakingUndetermined = 0, sslHandshakingAsClient, sslHandshakingAsServer } sslHandshakingType; typedef struct sslServerCertsStr { /* Configuration state for server sockets */ CERTCertificate * serverCert; CERTCertificateList * serverCertChain; ssl3KeyPair * serverKeyPair; unsigned int serverKeyBits; } sslServerCerts; #define SERVERKEY serverKeyPair->privKey #define SSL_LOCK_RANK_SPEC 255 #define SSL_LOCK_RANK_GLOBAL NSS_RWLOCK_RANK_NONE /* These are the valid values for shutdownHow. ** These values are each 1 greater than the NSPR values, and the code ** depends on that relation to efficiently convert PR_SHUTDOWN values ** into ssl_SHUTDOWN values. These values use one bit for read, and ** another bit for write, and can be used as bitmasks. */ #define ssl_SHUTDOWN_NONE 0 /* NOT shutdown at all */ #define ssl_SHUTDOWN_RCV 1 /* PR_SHUTDOWN_RCV +1 */ #define ssl_SHUTDOWN_SEND 2 /* PR_SHUTDOWN_SEND +1 */ #define ssl_SHUTDOWN_BOTH 3 /* PR_SHUTDOWN_BOTH +1 */ /* ** A gather object. Used to read some data until a count has been ** satisfied. Primarily for support of async sockets. ** Everything in here is protected by the recvBufLock. */ struct sslGatherStr { int state; /* see GS_ values below. */ /* ssl 2 & 3 */ /* "buf" holds received plaintext SSL records, after decrypt and MAC check. * SSL2: recv'd ciphertext records are put here, then decrypted in place. * SSL3: recv'd ciphertext records are put in inbuf (see below), then * decrypted into buf. */ sslBuffer buf; /*recvBufLock*/ /* ssl 2 & 3 */ /* number of bytes previously read into hdr or buf(ssl2) or inbuf (ssl3). ** (offset - writeOffset) is the number of ciphertext bytes read in but ** not yet deciphered. */ unsigned int offset; /* ssl 2 & 3 */ /* number of bytes to read in next call to ssl_DefRecv (recv) */ unsigned int remainder; /* ssl 2 & 3 */ /* Number of ciphertext bytes to read in after 2-byte SSL record header. */ unsigned int count; /* ssl2 only */ /* size of the final plaintext record. ** == count - (recordPadding + MAC size) */ unsigned int recordLen; /* ssl2 only */ /* number of bytes of padding to be removed after decrypting. */ /* This value is taken from the record's hdr[2], which means a too large * value could crash us. */ unsigned int recordPadding; /* ssl2 only */ /* plaintext DATA begins this many bytes into "buf". */ unsigned int recordOffset; /* ssl2 only */ int encrypted; /* SSL2 session is now encrypted. ssl2 only */ /* These next two values are used by SSL2 and SSL3. ** DoRecv uses them to extract application data. ** The difference between writeOffset and readOffset is the amount of ** data available to the application. Note that the actual offset of ** the data in "buf" is recordOffset (above), not readOffset. ** In the current implementation, this is made available before the ** MAC is checked!! */ unsigned int readOffset; /* Spot where DATA reader (e.g. application ** or handshake code) will read next. ** Always zero for SSl3 application data. */ /* offset in buf/inbuf/hdr into which new data will be read from socket. */ unsigned int writeOffset; /* Buffer for ssl3 to read (encrypted) data from the socket */ sslBuffer inbuf; /*recvBufLock*/ /* ssl3 only */ /* The ssl[23]_GatherData functions read data into this buffer, rather ** than into buf or inbuf, while in the GS_HEADER state. ** The portion of the SSL record header put here always comes off the wire ** as plaintext, never ciphertext. ** For SSL2, the plaintext portion is two bytes long. For SSl3 it is 5. */ unsigned char hdr[5]; /* ssl 2 & 3 */ }; /* sslGather.state */ #define GS_INIT 0 #define GS_HEADER 1 #define GS_MAC 2 #define GS_DATA 3 #define GS_PAD 4 typedef SECStatus (*SSLCipher)(void * context, unsigned char * out, int * outlen, int maxout, const unsigned char *in, int inlen); typedef SECStatus (*SSLCompressor)(void * context, unsigned char * out, int * outlen, int maxout, const unsigned char *in, int inlen); typedef SECStatus (*SSLDestroy)(void *context, PRBool freeit); /* ** ssl3State and CipherSpec structs */ /* The SSL bulk cipher definition */ typedef enum { cipher_null, cipher_rc4, cipher_rc4_40, cipher_rc4_56, cipher_rc2, cipher_rc2_40, cipher_des, cipher_3des, cipher_des40, cipher_idea, cipher_aes_128, cipher_aes_256, cipher_camellia_128, cipher_camellia_256, cipher_seed, cipher_missing /* reserved for no such supported cipher */ /* This enum must match ssl3_cipherName[] in ssl3con.c. */ } SSL3BulkCipher; typedef enum { type_stream, type_block } CipherType; #define MAX_IV_LENGTH 64 /* * Do not depend upon 64 bit arithmetic in the underlying machine. */ typedef struct { PRUint32 high; PRUint32 low; } SSL3SequenceNumber; #define MAX_MAC_CONTEXT_BYTES 400 #define MAX_MAC_CONTEXT_LLONGS (MAX_MAC_CONTEXT_BYTES / 8) #define MAX_CIPHER_CONTEXT_BYTES 2080 #define MAX_CIPHER_CONTEXT_LLONGS (MAX_CIPHER_CONTEXT_BYTES / 8) typedef struct { SSL3Opaque client_write_iv [24]; SSL3Opaque server_write_iv [24]; SSL3Opaque wrapped_master_secret [48]; PRUint16 wrapped_master_secret_len; PRUint8 msIsWrapped; PRUint8 resumable; } ssl3SidKeys; /* 100 bytes */ typedef struct { PK11SymKey *write_key; PK11SymKey *write_mac_key; PK11Context *write_mac_context; SECItem write_key_item; SECItem write_iv_item; SECItem write_mac_key_item; SSL3Opaque write_iv[MAX_IV_LENGTH]; PRUint64 cipher_context[MAX_CIPHER_CONTEXT_LLONGS]; } ssl3KeyMaterial; /* ** These are the "specs" in the "ssl3" struct. ** Access to the pointers to these specs, and all the specs' contents ** (direct and indirect) is protected by the reader/writer lock ss->specLock. */ typedef struct { const ssl3BulkCipherDef *cipher_def; const ssl3MACDef * mac_def; SSLCompressionMethod compression_method; int mac_size; SSLCipher encode; SSLCipher decode; SSLDestroy destroy; void * encodeContext; void * decodeContext; SSLCompressor compressor; /* Don't name these fields compress */ SSLCompressor decompressor; /* and uncompress because zconf.h */ /* may define them as macros. */ SSLDestroy destroyCompressContext; void * compressContext; SSLDestroy destroyDecompressContext; void * decompressContext; PRBool bypassCiphers; /* did double bypass (at least) */ PK11SymKey * master_secret; SSL3SequenceNumber write_seq_num; SSL3SequenceNumber read_seq_num; SSL3ProtocolVersion version; ssl3KeyMaterial client; ssl3KeyMaterial server; SECItem msItem; unsigned char key_block[NUM_MIXERS * MD5_LENGTH]; unsigned char raw_master_secret[56]; SECItem srvVirtName; /* for server: name that was negotiated * with a client. For client - is * always set to NULL.*/ } ssl3CipherSpec; typedef enum { never_cached, in_client_cache, in_server_cache, invalid_cache /* no longer in any cache. */ } Cached; struct sslSessionIDStr { sslSessionID * next; /* chain used for client sockets, only */ CERTCertificate * peerCert; const char * peerID; /* client only */ const char * urlSvrName; /* client only */ CERTCertificate * localCert; PRIPv6Addr addr; PRUint16 port; SSL3ProtocolVersion version; PRUint32 creationTime; /* seconds since Jan 1, 1970 */ PRUint32 lastAccessTime; /* seconds since Jan 1, 1970 */ PRUint32 expirationTime; /* seconds since Jan 1, 1970 */ Cached cached; int references; SSLSignType authAlgorithm; PRUint32 authKeyBits; SSLKEAType keaType; PRUint32 keaKeyBits; union { struct { /* the V2 code depends upon the size of sessionID. */ unsigned char sessionID[SSL2_SESSIONID_BYTES]; /* Stuff used to recreate key and read/write cipher objects */ SECItem masterKey; /* never wrapped */ int cipherType; SECItem cipherArg; int keyBits; int secretKeyBits; } ssl2; struct { /* values that are copied into the server's on-disk SID cache. */ uint8 sessionIDLength; SSL3Opaque sessionID[SSL3_SESSIONID_BYTES]; ssl3CipherSuite cipherSuite; SSLCompressionMethod compression; int policy; ssl3SidKeys keys; CK_MECHANISM_TYPE masterWrapMech; /* mechanism used to wrap master secret */ SSL3KEAType exchKeyType; /* key type used in exchange algorithm, * and to wrap the sym wrapping key. */ #ifdef NSS_ENABLE_ECC PRUint32 negotiatedECCurves; #endif /* NSS_ENABLE_ECC */ /* The following values are NOT restored from the server's on-disk * session cache, but are restored from the client's cache. */ PK11SymKey * clientWriteKey; PK11SymKey * serverWriteKey; /* The following values pertain to the slot that wrapped the ** master secret. (used only in client) */ SECMODModuleID masterModuleID; /* what module wrapped the master secret */ CK_SLOT_ID masterSlotID; PRUint16 masterWrapIndex; /* what's the key index for the wrapping key */ PRUint16 masterWrapSeries; /* keep track of the slot series, so we don't * accidently try to use new keys after the * card gets removed and replaced.*/ /* The following values pertain to the slot that did the signature ** for client auth. (used only in client) */ SECMODModuleID clAuthModuleID; CK_SLOT_ID clAuthSlotID; PRUint16 clAuthSeries; char masterValid; char clAuthValid; /* Session ticket if we have one, is sent as an extension in the * ClientHello message. This field is used by clients. */ NewSessionTicket sessionTicket; SECItem srvName; } ssl3; } u; }; typedef struct ssl3CipherSuiteDefStr { ssl3CipherSuite cipher_suite; SSL3BulkCipher bulk_cipher_alg; SSL3MACAlgorithm mac_alg; SSL3KeyExchangeAlgorithm key_exchange_alg; } ssl3CipherSuiteDef; /* ** There are tables of these, all const. */ typedef struct { SSL3KeyExchangeAlgorithm kea; SSL3KEAType exchKeyType; SSL3SignType signKeyType; PRBool is_limited; int key_size_limit; PRBool tls_keygen; } ssl3KEADef; typedef enum { kg_null, kg_strong, kg_export } SSL3KeyGenMode; /* ** There are tables of these, all const. */ struct ssl3BulkCipherDefStr { SSL3BulkCipher cipher; SSLCipherAlgorithm calg; int key_size; int secret_key_size; CipherType type; int iv_size; int block_size; SSL3KeyGenMode keygen_mode; }; /* ** There are tables of these, all const. */ struct ssl3MACDefStr { SSL3MACAlgorithm mac; CK_MECHANISM_TYPE mmech; int pad_size; int mac_size; }; typedef enum { wait_client_hello, wait_client_cert, wait_client_key, wait_cert_verify, wait_change_cipher, wait_finished, wait_server_hello, wait_server_cert, wait_server_key, wait_cert_request, wait_hello_done, wait_new_session_ticket, idle_handshake } SSL3WaitState; /* * TLS extension related constants and data structures. */ typedef struct TLSExtensionDataStr TLSExtensionData; typedef struct SessionTicketDataStr SessionTicketData; struct TLSExtensionDataStr { /* registered callbacks that send server hello extensions */ ssl3HelloExtensionSender serverSenders[SSL_MAX_EXTENSIONS]; /* Keep track of the extensions that are negotiated. */ PRUint16 numAdvertised; PRUint16 numNegotiated; PRUint16 advertised[SSL_MAX_EXTENSIONS]; PRUint16 negotiated[SSL_MAX_EXTENSIONS]; /* SessionTicket Extension related data. */ PRBool ticketTimestampVerified; PRBool emptySessionTicket; /* SNI Extension related data * Names data is not coppied from the input buffer. It can not be * used outside the scope where input buffer is defined and that * is beyond ssl3_HandleClientHello function. */ SECItem *sniNameArr; PRUint32 sniNameArrSize; }; /* ** This is the "hs" member of the "ssl3" struct. ** This entire struct is protected by ssl3HandshakeLock */ typedef struct SSL3HandshakeStateStr { SSL3Random server_random; SSL3Random client_random; SSL3WaitState ws; PRUint64 md5_cx[MAX_MAC_CONTEXT_LLONGS]; PRUint64 sha_cx[MAX_MAC_CONTEXT_LLONGS]; PK11Context * md5; /* handshake running hashes */ PK11Context * sha; const ssl3KEADef * kea_def; ssl3CipherSuite cipher_suite; const ssl3CipherSuiteDef *suite_def; SSLCompressionMethod compression; sslBuffer msg_body; /* protected by recvBufLock */ /* partial handshake message from record layer */ unsigned int header_bytes; /* number of bytes consumed from handshake */ /* message for message type and header length */ SSL3HandshakeType msg_type; unsigned long msg_len; SECItem ca_list; /* used only by client */ PRBool isResuming; /* are we resuming a session */ PRBool rehandshake; /* immediately start another handshake * when this one finishes */ PRBool usedStepDownKey; /* we did a server key exchange. */ PRBool sendingSCSV; /* instead of empty RI */ sslBuffer msgState; /* current state for handshake messages*/ /* protected by recvBufLock */ sslBuffer messages; /* Accumulated handshake messages */ PRUint16 finishedBytes; /* size of single finished below */ union { TLSFinished tFinished[2]; /* client, then server */ SSL3Hashes sFinished[2]; SSL3Opaque data[72]; } finishedMsgs; #ifdef NSS_ENABLE_ECC PRUint32 negotiatedECCurves; /* bit mask */ #endif /* NSS_ENABLE_ECC */ } SSL3HandshakeState; /* ** This is the "ssl3" struct, as in "ss->ssl3". ** note: ** usually, crSpec == cwSpec and prSpec == pwSpec. ** Sometimes, crSpec == pwSpec and prSpec == cwSpec. ** But there are never more than 2 actual specs. ** No spec must ever be modified if either "current" pointer points to it. */ struct ssl3StateStr { /* ** The following Specs and Spec pointers must be protected using the ** Spec Lock. */ ssl3CipherSpec * crSpec; /* current read spec. */ ssl3CipherSpec * prSpec; /* pending read spec. */ ssl3CipherSpec * cwSpec; /* current write spec. */ ssl3CipherSpec * pwSpec; /* pending write spec. */ CERTCertificate * clientCertificate; /* used by client */ SECKEYPrivateKey * clientPrivateKey; /* used by client */ CERTCertificateList *clientCertChain; /* used by client */ PRBool sendEmptyCert; /* used by client */ int policy; /* This says what cipher suites we can do, and should * be either SSL_ALLOWED or SSL_RESTRICTED */ PRArenaPool * peerCertArena; /* These are used to keep track of the peer CA */ void * peerCertChain; /* chain while we are trying to validate it. */ CERTDistNames * ca_list; /* used by server. trusted CAs for this socket. */ PRBool initialized; SSL3HandshakeState hs; ssl3CipherSpec specs[2]; /* one is current, one is pending. */ }; typedef struct { SSL3ContentType type; SSL3ProtocolVersion version; sslBuffer * buf; } SSL3Ciphertext; struct ssl3KeyPairStr { SECKEYPrivateKey * privKey; SECKEYPublicKey * pubKey; PRInt32 refCount; /* use PR_Atomic calls for this. */ }; typedef struct SSLWrappedSymWrappingKeyStr { SSL3Opaque wrappedSymmetricWrappingkey[512]; SSL3Opaque wrapIV[24]; CK_MECHANISM_TYPE symWrapMechanism; /* unwrapped symmetric wrapping key uses this mechanism */ CK_MECHANISM_TYPE asymWrapMechanism; /* mechanism used to wrap the SymmetricWrappingKey using * server's public and/or private keys. */ SSL3KEAType exchKeyType; /* type of keys used to wrap SymWrapKey*/ PRInt32 symWrapMechIndex; PRUint16 wrappedSymKeyLen; PRUint16 wrapIVLen; } SSLWrappedSymWrappingKey; typedef struct SessionTicketStr { uint16 ticket_version; SSL3ProtocolVersion ssl_version; ssl3CipherSuite cipher_suite; SSLCompressionMethod compression_method; SSLSignType authAlgorithm; uint32 authKeyBits; SSLKEAType keaType; uint32 keaKeyBits; /* * exchKeyType and msWrapMech contain meaningful values only if * ms_is_wrapped is true. */ uint8 ms_is_wrapped; SSLKEAType exchKeyType; /* XXX(wtc): same as keaType above? */ CK_MECHANISM_TYPE msWrapMech; uint16 ms_length; SSL3Opaque master_secret[48]; ClientIdentity client_identity; SECItem peer_cert; uint32 timestamp; SECItem srvName; /* negotiated server name */ } SessionTicket; /* * SSL2 buffers used in SSL3. * writeBuf in the SecurityInfo maintained by sslsecur.c is used * to hold the data just about to be passed to the kernel * sendBuf in the ConnectInfo maintained by sslcon.c is used * to hold handshake messages as they are accumulated */ /* ** This is "ci", as in "ss->sec.ci". ** ** Protection: All the variables in here are protected by ** firstHandshakeLock AND (in ssl3) ssl3HandshakeLock */ struct sslConnectInfoStr { /* outgoing handshakes appended to this. */ sslBuffer sendBuf; /*xmitBufLock*/ /* ssl 2 & 3 */ PRIPv6Addr peer; /* ssl 2 & 3 */ unsigned short port; /* ssl 2 & 3 */ sslSessionID *sid; /* ssl 2 & 3 */ /* see CIS_HAVE defines below for the bit values in *elements. */ char elements; /* ssl2 only */ char requiredElements; /* ssl2 only */ char sentElements; /* ssl2 only */ char sentFinished; /* ssl2 only */ /* Length of server challenge. Used by client when saving challenge */ int serverChallengeLen; /* ssl2 only */ /* type of authentication requested by server */ unsigned char authType; /* ssl2 only */ /* Challenge sent by client to server in client-hello message */ /* SSL3 gets a copy of this. See ssl3_StartHandshakeHash(). */ unsigned char clientChallenge[SSL_MAX_CHALLENGE_BYTES]; /* ssl 2 & 3 */ /* Connection-id sent by server to client in server-hello message */ unsigned char connectionID[SSL_CONNECTIONID_BYTES]; /* ssl2 only */ /* Challenge sent by server to client in request-certificate message */ unsigned char serverChallenge[SSL_MAX_CHALLENGE_BYTES]; /* ssl2 only */ /* Information kept to handle a request-certificate message */ unsigned char readKey[SSL_MAX_MASTER_KEY_BYTES]; /* ssl2 only */ unsigned char writeKey[SSL_MAX_MASTER_KEY_BYTES]; /* ssl2 only */ unsigned keySize; /* ssl2 only */ }; /* bit values for ci->elements, ci->requiredElements, sentElements. */ #define CIS_HAVE_MASTER_KEY 0x01 #define CIS_HAVE_CERTIFICATE 0x02 #define CIS_HAVE_FINISHED 0x04 #define CIS_HAVE_VERIFY 0x08 /* Note: The entire content of this struct and whatever it points to gets * blown away by SSL_ResetHandshake(). This is "sec" as in "ss->sec". * * Unless otherwise specified below, the contents of this struct are * protected by firstHandshakeLock AND (in ssl3) ssl3HandshakeLock. */ struct sslSecurityInfoStr { sslSendFunc send; /*xmitBufLock*/ /* ssl 2 & 3 */ int isServer; /* Spec Lock?*/ /* ssl 2 & 3 */ sslBuffer writeBuf; /*xmitBufLock*/ /* ssl 2 & 3 */ int cipherType; /* ssl 2 & 3 */ int keyBits; /* ssl 2 & 3 */ int secretKeyBits; /* ssl 2 & 3 */ CERTCertificate *localCert; /* ssl 2 & 3 */ CERTCertificate *peerCert; /* ssl 2 & 3 */ SECKEYPublicKey *peerKey; /* ssl3 only */ SSLSignType authAlgorithm; PRUint32 authKeyBits; SSLKEAType keaType; PRUint32 keaKeyBits; /* ** Procs used for SID cache (nonce) management. ** Different implementations exist for clients/servers ** The lookup proc is only used for servers. Baloney! */ sslSessionIDCacheFunc cache; /* ssl 2 & 3 */ sslSessionIDUncacheFunc uncache; /* ssl 2 & 3 */ /* ** everything below here is for ssl2 only. ** This stuff is equivalent to SSL3's "spec", and is protected by the ** same "Spec Lock" as used for SSL3's specs. */ PRUint32 sendSequence; /*xmitBufLock*/ /* ssl2 only */ PRUint32 rcvSequence; /*recvBufLock*/ /* ssl2 only */ /* Hash information; used for one-way-hash functions (MD2, MD5, etc.) */ const SECHashObject *hash; /* Spec Lock */ /* ssl2 only */ void *hashcx; /* Spec Lock */ /* ssl2 only */ SECItem sendSecret; /* Spec Lock */ /* ssl2 only */ SECItem rcvSecret; /* Spec Lock */ /* ssl2 only */ /* Session cypher contexts; one for each direction */ void *readcx; /* Spec Lock */ /* ssl2 only */ void *writecx; /* Spec Lock */ /* ssl2 only */ SSLCipher enc; /* Spec Lock */ /* ssl2 only */ SSLCipher dec; /* Spec Lock */ /* ssl2 only */ void (*destroy)(void *, PRBool); /* Spec Lock */ /* ssl2 only */ /* Blocking information for the session cypher */ int blockShift; /* Spec Lock */ /* ssl2 only */ int blockSize; /* Spec Lock */ /* ssl2 only */ /* These are used during a connection handshake */ sslConnectInfo ci; /* ssl 2 & 3 */ }; /* ** SSL Socket struct ** ** Protection: XXX */ struct sslSocketStr { PRFileDesc * fd; /* Pointer to operations vector for this socket */ const sslSocketOps * ops; /* SSL socket options */ sslOptions opt; /* State flags */ unsigned long clientAuthRequested; unsigned long delayDisabled; /* Nagle delay disabled */ unsigned long firstHsDone; /* first handshake is complete. */ unsigned long handshakeBegun; unsigned long lastWriteBlocked; unsigned long recvdCloseNotify; /* received SSL EOF. */ unsigned long TCPconnected; unsigned long appDataBuffered; unsigned long peerRequestedProtection; /* from old renegotiation */ /* version of the protocol to use */ SSL3ProtocolVersion version; SSL3ProtocolVersion clientHelloVersion; /* version sent in client hello. */ sslSecurityInfo sec; /* not a pointer any more */ /* protected by firstHandshakeLock AND (in ssl3) ssl3HandshakeLock. */ const char *url; /* ssl 2 & 3 */ sslHandshakeFunc handshake; /*firstHandshakeLock*/ sslHandshakeFunc nextHandshake; /*firstHandshakeLock*/ sslHandshakeFunc securityHandshake; /*firstHandshakeLock*/ /* the following variable is only used with socks or other proxies. */ char * peerID; /* String uniquely identifies target server. */ unsigned char * cipherSpecs; unsigned int sizeCipherSpecs; const unsigned char * preferredCipher; ssl3KeyPair * stepDownKeyPair; /* RSA step down keys */ /* Callbacks */ SSLAuthCertificate authCertificate; void *authCertificateArg; SSLGetClientAuthData getClientAuthData; void *getClientAuthDataArg; SSLSNISocketConfig sniSocketConfig; void *sniSocketConfigArg; SSLBadCertHandler handleBadCert; void *badCertArg; SSLHandshakeCallback handshakeCallback; void *handshakeCallbackData; void *pkcs11PinArg; PRIntervalTime rTimeout; /* timeout for NSPR I/O */ PRIntervalTime wTimeout; /* timeout for NSPR I/O */ PRIntervalTime cTimeout; /* timeout for NSPR I/O */ PZLock * recvLock; /* lock against multiple reader threads. */ PZLock * sendLock; /* lock against multiple sender threads. */ PZMonitor * recvBufLock; /* locks low level recv buffers. */ PZMonitor * xmitBufLock; /* locks low level xmit buffers. */ /* Only one thread may operate on the socket until the initial handshake ** is complete. This Monitor ensures that. Since SSL2 handshake is ** only done once, this is also effectively the SSL2 handshake lock. */ PZMonitor * firstHandshakeLock; /* This monitor protects the ssl3 handshake state machine data. ** Only one thread (reader or writer) may be in the ssl3 handshake state ** machine at any time. */ PZMonitor * ssl3HandshakeLock; /* reader/writer lock, protects the secret data needed to encrypt and MAC ** outgoing records, and to decrypt and MAC check incoming ciphertext ** records. */ NSSRWLock * specLock; /* handle to perm cert db (and implicitly to the temp cert db) used ** with this socket. */ CERTCertDBHandle * dbHandle; PRThread * writerThread; /* thread holds SSL_LOCK_WRITER lock */ PRUint16 shutdownHow; /* See ssl_SHUTDOWN defines below. */ PRUint16 allowedByPolicy; /* copy of global policy bits. */ PRUint16 maybeAllowedByPolicy; /* copy of global policy bits. */ PRUint16 chosenPreference; /* SSL2 cipher preferences. */ sslHandshakingType handshaking; /* Gather object used for gathering data */ sslGather gs; /*recvBufLock*/ sslBuffer saveBuf; /*xmitBufLock*/ sslBuffer pendingBuf; /*xmitBufLock*/ /* Configuration state for server sockets */ /* server cert and key for each KEA type */ sslServerCerts serverCerts[kt_kea_size]; ssl3CipherSuiteCfg cipherSuites[ssl_V3_SUITES_IMPLEMENTED]; ssl3KeyPair * ephemeralECDHKeyPair; /* for ECDHE-* handshake */ /* SSL3 state info. Formerly was a pointer */ ssl3State ssl3; /* * TLS extension related data. */ /* True when the current session is a stateless resume. */ PRBool statelessResume; TLSExtensionData xtnData; }; /* All the global data items declared here should be protected using the ** ssl_global_data_lock, which is a reader/writer lock. */ extern NSSRWLock * ssl_global_data_lock; extern char ssl_debug; extern char ssl_trace; extern FILE * ssl_trace_iob; extern FILE * ssl_keylog_iob; extern CERTDistNames * ssl3_server_ca_list; extern PRUint32 ssl_sid_timeout; extern PRUint32 ssl3_sid_timeout; extern PRBool ssl3_global_policy_some_restricted; extern const char * const ssl_cipherName[]; extern const char * const ssl3_cipherName[]; extern sslSessionIDLookupFunc ssl_sid_lookup; extern sslSessionIDCacheFunc ssl_sid_cache; extern sslSessionIDUncacheFunc ssl_sid_uncache; /************************************************************************/ SEC_BEGIN_PROTOS /* Implementation of ops for default (non socks, non secure) case */ extern int ssl_DefConnect(sslSocket *ss, const PRNetAddr *addr); extern PRFileDesc *ssl_DefAccept(sslSocket *ss, PRNetAddr *addr); extern int ssl_DefBind(sslSocket *ss, const PRNetAddr *addr); extern int ssl_DefListen(sslSocket *ss, int backlog); extern int ssl_DefShutdown(sslSocket *ss, int how); extern int ssl_DefClose(sslSocket *ss); extern int ssl_DefRecv(sslSocket *ss, unsigned char *buf, int len, int flags); extern int ssl_DefSend(sslSocket *ss, const unsigned char *buf, int len, int flags); extern int ssl_DefRead(sslSocket *ss, unsigned char *buf, int len); extern int ssl_DefWrite(sslSocket *ss, const unsigned char *buf, int len); extern int ssl_DefGetpeername(sslSocket *ss, PRNetAddr *name); extern int ssl_DefGetsockname(sslSocket *ss, PRNetAddr *name); extern int ssl_DefGetsockopt(sslSocket *ss, PRSockOption optname, void *optval, PRInt32 *optlen); extern int ssl_DefSetsockopt(sslSocket *ss, PRSockOption optname, const void *optval, PRInt32 optlen); /* Implementation of ops for socks only case */ extern int ssl_SocksConnect(sslSocket *ss, const PRNetAddr *addr); extern PRFileDesc *ssl_SocksAccept(sslSocket *ss, PRNetAddr *addr); extern int ssl_SocksBind(sslSocket *ss, const PRNetAddr *addr); extern int ssl_SocksListen(sslSocket *ss, int backlog); extern int ssl_SocksGetsockname(sslSocket *ss, PRNetAddr *name); extern int ssl_SocksRecv(sslSocket *ss, unsigned char *buf, int len, int flags); extern int ssl_SocksSend(sslSocket *ss, const unsigned char *buf, int len, int flags); extern int ssl_SocksRead(sslSocket *ss, unsigned char *buf, int len); extern int ssl_SocksWrite(sslSocket *ss, const unsigned char *buf, int len); /* Implementation of ops for secure only case */ extern int ssl_SecureConnect(sslSocket *ss, const PRNetAddr *addr); extern PRFileDesc *ssl_SecureAccept(sslSocket *ss, PRNetAddr *addr); extern int ssl_SecureRecv(sslSocket *ss, unsigned char *buf, int len, int flags); extern int ssl_SecureSend(sslSocket *ss, const unsigned char *buf, int len, int flags); extern int ssl_SecureRead(sslSocket *ss, unsigned char *buf, int len); extern int ssl_SecureWrite(sslSocket *ss, const unsigned char *buf, int len); extern int ssl_SecureShutdown(sslSocket *ss, int how); extern int ssl_SecureClose(sslSocket *ss); /* Implementation of ops for secure socks case */ extern int ssl_SecureSocksConnect(sslSocket *ss, const PRNetAddr *addr); extern PRFileDesc *ssl_SecureSocksAccept(sslSocket *ss, PRNetAddr *addr); extern PRFileDesc *ssl_FindTop(sslSocket *ss); /* Gather funcs. */ extern sslGather * ssl_NewGather(void); extern SECStatus ssl_InitGather(sslGather *gs); extern void ssl_DestroyGather(sslGather *gs); extern int ssl2_GatherData(sslSocket *ss, sslGather *gs, int flags); extern int ssl2_GatherRecord(sslSocket *ss, int flags); extern SECStatus ssl_GatherRecord1stHandshake(sslSocket *ss); extern SECStatus ssl2_HandleClientHelloMessage(sslSocket *ss); extern SECStatus ssl2_HandleServerHelloMessage(sslSocket *ss); extern int ssl2_StartGatherBytes(sslSocket *ss, sslGather *gs, unsigned int count); extern SECStatus ssl_CreateSecurityInfo(sslSocket *ss); extern SECStatus ssl_CopySecurityInfo(sslSocket *ss, sslSocket *os); extern void ssl_ResetSecurityInfo(sslSecurityInfo *sec, PRBool doMemset); extern void ssl_DestroySecurityInfo(sslSecurityInfo *sec); extern sslSocket * ssl_DupSocket(sslSocket *old); extern void ssl_PrintBuf(sslSocket *ss, const char *msg, const void *cp, int len); extern void ssl_DumpMsg(sslSocket *ss, unsigned char *bp, unsigned len); extern int ssl_SendSavedWriteData(sslSocket *ss); extern SECStatus ssl_SaveWriteData(sslSocket *ss, const void* p, unsigned int l); extern SECStatus ssl2_BeginClientHandshake(sslSocket *ss); extern SECStatus ssl2_BeginServerHandshake(sslSocket *ss); extern int ssl_Do1stHandshake(sslSocket *ss); extern SECStatus sslBuffer_Grow(sslBuffer *b, unsigned int newLen); extern SECStatus sslBuffer_Append(sslBuffer *b, const void * data, unsigned int len); extern void ssl2_UseClearSendFunc(sslSocket *ss); extern void ssl_ChooseSessionIDProcs(sslSecurityInfo *sec); extern sslSessionID *ssl3_NewSessionID(sslSocket *ss, PRBool is_server); extern sslSessionID *ssl_LookupSID(const PRIPv6Addr *addr, PRUint16 port, const char *peerID, const char *urlSvrName); extern void ssl_FreeSID(sslSessionID *sid); extern int ssl3_SendApplicationData(sslSocket *ss, const PRUint8 *in, int len, int flags); extern PRBool ssl_FdIsBlocking(PRFileDesc *fd); extern PRBool ssl_SocketIsBlocking(sslSocket *ss); extern void ssl_SetAlwaysBlock(sslSocket *ss); extern SECStatus ssl_EnableNagleDelay(sslSocket *ss, PRBool enabled); #define SSL_LOCK_READER(ss) if (ss->recvLock) PZ_Lock(ss->recvLock) #define SSL_UNLOCK_READER(ss) if (ss->recvLock) PZ_Unlock(ss->recvLock) #define SSL_LOCK_WRITER(ss) if (ss->sendLock) PZ_Lock(ss->sendLock) #define SSL_UNLOCK_WRITER(ss) if (ss->sendLock) PZ_Unlock(ss->sendLock) #define ssl_Get1stHandshakeLock(ss) \ { if (!ss->opt.noLocks) PZ_EnterMonitor((ss)->firstHandshakeLock); } #define ssl_Release1stHandshakeLock(ss) \ { if (!ss->opt.noLocks) PZ_ExitMonitor((ss)->firstHandshakeLock); } #define ssl_Have1stHandshakeLock(ss) \ (PZ_InMonitor((ss)->firstHandshakeLock)) #define ssl_GetSSL3HandshakeLock(ss) \ { if (!ss->opt.noLocks) PZ_EnterMonitor((ss)->ssl3HandshakeLock); } #define ssl_ReleaseSSL3HandshakeLock(ss) \ { if (!ss->opt.noLocks) PZ_ExitMonitor((ss)->ssl3HandshakeLock); } #define ssl_HaveSSL3HandshakeLock(ss) \ (PZ_InMonitor((ss)->ssl3HandshakeLock)) #define ssl_GetSpecReadLock(ss) \ { if (!ss->opt.noLocks) NSSRWLock_LockRead((ss)->specLock); } #define ssl_ReleaseSpecReadLock(ss) \ { if (!ss->opt.noLocks) NSSRWLock_UnlockRead((ss)->specLock); } #define ssl_GetSpecWriteLock(ss) \ { if (!ss->opt.noLocks) NSSRWLock_LockWrite((ss)->specLock); } #define ssl_ReleaseSpecWriteLock(ss) \ { if (!ss->opt.noLocks) NSSRWLock_UnlockWrite((ss)->specLock); } #define ssl_HaveSpecWriteLock(ss) \ (NSSRWLock_HaveWriteLock((ss)->specLock)) #define ssl_GetRecvBufLock(ss) \ { if (!ss->opt.noLocks) PZ_EnterMonitor((ss)->recvBufLock); } #define ssl_ReleaseRecvBufLock(ss) \ { if (!ss->opt.noLocks) PZ_ExitMonitor( (ss)->recvBufLock); } #define ssl_HaveRecvBufLock(ss) \ (PZ_InMonitor((ss)->recvBufLock)) #define ssl_GetXmitBufLock(ss) \ { if (!ss->opt.noLocks) PZ_EnterMonitor((ss)->xmitBufLock); } #define ssl_ReleaseXmitBufLock(ss) \ { if (!ss->opt.noLocks) PZ_ExitMonitor( (ss)->xmitBufLock); } #define ssl_HaveXmitBufLock(ss) \ (PZ_InMonitor((ss)->xmitBufLock)) extern SECStatus ssl3_KeyAndMacDeriveBypass(ssl3CipherSpec * pwSpec, const unsigned char * cr, const unsigned char * sr, PRBool isTLS, PRBool isExport); extern SECStatus ssl3_MasterKeyDeriveBypass( ssl3CipherSpec * pwSpec, const unsigned char * cr, const unsigned char * sr, const SECItem * pms, PRBool isTLS, PRBool isRSA); /* These functions are called from secnav, even though they're "private". */ extern int ssl2_SendErrorMessage(struct sslSocketStr *ss, int error); extern int SSL_RestartHandshakeAfterServerCert(struct sslSocketStr *ss); extern int SSL_RestartHandshakeAfterCertReq(struct sslSocketStr *ss, CERTCertificate *cert, SECKEYPrivateKey *key, CERTCertificateList *certChain); extern sslSocket *ssl_FindSocket(PRFileDesc *fd); extern void ssl_FreeSocket(struct sslSocketStr *ssl); extern SECStatus SSL3_SendAlert(sslSocket *ss, SSL3AlertLevel level, SSL3AlertDescription desc); extern int ssl2_RestartHandshakeAfterCertReq(sslSocket * ss, CERTCertificate * cert, SECKEYPrivateKey * key); extern SECStatus ssl3_RestartHandshakeAfterCertReq(sslSocket * ss, CERTCertificate * cert, SECKEYPrivateKey * key, CERTCertificateList *certChain); extern int ssl2_RestartHandshakeAfterServerCert(sslSocket *ss); extern int ssl3_RestartHandshakeAfterServerCert(sslSocket *ss); /* * for dealing with SSL 3.0 clients sending SSL 2.0 format hellos */ extern SECStatus ssl3_HandleV2ClientHello( sslSocket *ss, unsigned char *buffer, int length); extern SECStatus ssl3_StartHandshakeHash( sslSocket *ss, unsigned char *buf, int length); /* * SSL3 specific routines */ SECStatus ssl3_SendClientHello(sslSocket *ss); /* * input into the SSL3 machinery from the actualy network reading code */ SECStatus ssl3_HandleRecord( sslSocket *ss, SSL3Ciphertext *cipher, sslBuffer *out); int ssl3_GatherAppDataRecord(sslSocket *ss, int flags); int ssl3_GatherCompleteHandshake(sslSocket *ss, int flags); /* * When talking to export clients or using export cipher suites, servers * with public RSA keys larger than 512 bits need to use a 512-bit public * key, signed by the larger key. The smaller key is a "step down" key. * Generate that key pair and keep it around. */ extern SECStatus ssl3_CreateRSAStepDownKeys(sslSocket *ss); #ifdef NSS_ENABLE_ECC extern void ssl3_FilterECCipherSuitesByServerCerts(sslSocket *ss); extern PRBool ssl3_IsECCEnabled(sslSocket *ss); extern SECStatus ssl3_DisableECCSuites(sslSocket * ss, const ssl3CipherSuite * suite); /* Macro for finding a curve equivalent in strength to RSA key's */ #define SSL_RSASTRENGTH_TO_ECSTRENGTH(s) \ ((s <= 1024) ? 160 \ : ((s <= 2048) ? 224 \ : ((s <= 3072) ? 256 \ : ((s <= 7168) ? 384 : 521 ) ) ) ) /* Types and names of elliptic curves used in TLS */ typedef enum { ec_type_explicitPrime = 1, ec_type_explicitChar2Curve = 2, ec_type_named } ECType; typedef enum { ec_noName = 0, ec_sect163k1 = 1, ec_sect163r1 = 2, ec_sect163r2 = 3, ec_sect193r1 = 4, ec_sect193r2 = 5, ec_sect233k1 = 6, ec_sect233r1 = 7, ec_sect239k1 = 8, ec_sect283k1 = 9, ec_sect283r1 = 10, ec_sect409k1 = 11, ec_sect409r1 = 12, ec_sect571k1 = 13, ec_sect571r1 = 14, ec_secp160k1 = 15, ec_secp160r1 = 16, ec_secp160r2 = 17, ec_secp192k1 = 18, ec_secp192r1 = 19, ec_secp224k1 = 20, ec_secp224r1 = 21, ec_secp256k1 = 22, ec_secp256r1 = 23, ec_secp384r1 = 24, ec_secp521r1 = 25, ec_pastLastName } ECName; extern SECStatus ssl3_ECName2Params(PRArenaPool *arena, ECName curve, SECKEYECParams *params); ECName ssl3_GetCurveWithECKeyStrength(PRUint32 curvemsk, int requiredECCbits); #endif /* NSS_ENABLE_ECC */ extern SECStatus ssl3_CipherPrefSetDefault(ssl3CipherSuite which, PRBool on); extern SECStatus ssl3_CipherPrefGetDefault(ssl3CipherSuite which, PRBool *on); extern SECStatus ssl2_CipherPrefSetDefault(PRInt32 which, PRBool enabled); extern SECStatus ssl2_CipherPrefGetDefault(PRInt32 which, PRBool *enabled); extern SECStatus ssl3_CipherPrefSet(sslSocket *ss, ssl3CipherSuite which, PRBool on); extern SECStatus ssl3_CipherPrefGet(sslSocket *ss, ssl3CipherSuite which, PRBool *on); extern SECStatus ssl2_CipherPrefSet(sslSocket *ss, PRInt32 which, PRBool enabled); extern SECStatus ssl2_CipherPrefGet(sslSocket *ss, PRInt32 which, PRBool *enabled); extern SECStatus ssl3_SetPolicy(ssl3CipherSuite which, PRInt32 policy); extern SECStatus ssl3_GetPolicy(ssl3CipherSuite which, PRInt32 *policy); extern SECStatus ssl2_SetPolicy(PRInt32 which, PRInt32 policy); extern SECStatus ssl2_GetPolicy(PRInt32 which, PRInt32 *policy); extern void ssl2_InitSocketPolicy(sslSocket *ss); extern void ssl3_InitSocketPolicy(sslSocket *ss); extern SECStatus ssl3_ConstructV2CipherSpecsHack(sslSocket *ss, unsigned char *cs, int *size); extern SECStatus ssl3_RedoHandshake(sslSocket *ss, PRBool flushCache); extern void ssl3_DestroySSL3Info(sslSocket *ss); extern SECStatus ssl3_NegotiateVersion(sslSocket *ss, SSL3ProtocolVersion peerVersion); extern SECStatus ssl_GetPeerInfo(sslSocket *ss); #ifdef NSS_ENABLE_ECC /* ECDH functions */ extern SECStatus ssl3_SendECDHClientKeyExchange(sslSocket * ss, SECKEYPublicKey * svrPubKey); extern SECStatus ssl3_HandleECDHServerKeyExchange(sslSocket *ss, SSL3Opaque *b, PRUint32 length); extern SECStatus ssl3_HandleECDHClientKeyExchange(sslSocket *ss, SSL3Opaque *b, PRUint32 length, SECKEYPublicKey *srvrPubKey, SECKEYPrivateKey *srvrPrivKey); extern SECStatus ssl3_SendECDHServerKeyExchange(sslSocket *ss); #endif extern SECStatus ssl3_ComputeCommonKeyHash(PRUint8 * hashBuf, unsigned int bufLen, SSL3Hashes *hashes, PRBool bypassPKCS11); extern SECStatus ssl3_InitPendingCipherSpec(sslSocket *ss, PK11SymKey *pms); extern SECStatus ssl3_AppendHandshake(sslSocket *ss, const void *void_src, PRInt32 bytes); extern SECStatus ssl3_AppendHandshakeHeader(sslSocket *ss, SSL3HandshakeType t, PRUint32 length); extern SECStatus ssl3_AppendHandshakeNumber(sslSocket *ss, PRInt32 num, PRInt32 lenSize); extern SECStatus ssl3_AppendHandshakeVariable( sslSocket *ss, const SSL3Opaque *src, PRInt32 bytes, PRInt32 lenSize); extern SECStatus ssl3_ConsumeHandshake(sslSocket *ss, void *v, PRInt32 bytes, SSL3Opaque **b, PRUint32 *length); extern PRInt32 ssl3_ConsumeHandshakeNumber(sslSocket *ss, PRInt32 bytes, SSL3Opaque **b, PRUint32 *length); extern SECStatus ssl3_ConsumeHandshakeVariable(sslSocket *ss, SECItem *i, PRInt32 bytes, SSL3Opaque **b, PRUint32 *length); extern SECStatus ssl3_SignHashes(SSL3Hashes *hash, SECKEYPrivateKey *key, SECItem *buf, PRBool isTLS); extern SECStatus ssl3_VerifySignedHashes(SSL3Hashes *hash, CERTCertificate *cert, SECItem *buf, PRBool isTLS, void *pwArg); extern SECStatus ssl3_CacheWrappedMasterSecret(sslSocket *ss, sslSessionID *sid, ssl3CipherSpec *spec, SSL3KEAType effectiveExchKeyType); /* Functions that handle ClientHello and ServerHello extensions. */ extern SECStatus ssl3_HandleServerNameXtn(sslSocket * ss, PRUint16 ex_type, SECItem *data); extern SECStatus ssl3_HandleSupportedCurvesXtn(sslSocket * ss, PRUint16 ex_type, SECItem *data); extern SECStatus ssl3_HandleSupportedPointFormatsXtn(sslSocket * ss, PRUint16 ex_type, SECItem *data); extern SECStatus ssl3_ClientHandleSessionTicketXtn(sslSocket *ss, PRUint16 ex_type, SECItem *data); extern SECStatus ssl3_ServerHandleSessionTicketXtn(sslSocket *ss, PRUint16 ex_type, SECItem *data); /* ClientHello and ServerHello extension senders. * Note that not all extension senders are exposed here; only those that * that need exposure. */ extern PRInt32 ssl3_SendSessionTicketXtn(sslSocket *ss, PRBool append, PRUint32 maxBytes); /* ClientHello and ServerHello extension senders. * The code is in ssl3ext.c. */ extern PRInt32 ssl3_SendServerNameXtn(sslSocket *ss, PRBool append, PRUint32 maxBytes); /* Assigns new cert, cert chain and keys to ss->serverCerts * struct. If certChain is NULL, tries to find one. Aborts if * fails to do so. If cert and keyPair are NULL - unconfigures * sslSocket of kea type.*/ extern SECStatus ssl_ConfigSecureServer(sslSocket *ss, CERTCertificate *cert, CERTCertificateList *certChain, ssl3KeyPair *keyPair, SSLKEAType kea); /* Return key type for the cert */ extern SSLKEAType ssl_FindCertKEAType(CERTCertificate * cert); #ifdef NSS_ENABLE_ECC extern PRInt32 ssl3_SendSupportedCurvesXtn(sslSocket *ss, PRBool append, PRUint32 maxBytes); extern PRInt32 ssl3_SendSupportedPointFormatsXtn(sslSocket *ss, PRBool append, PRUint32 maxBytes); #endif /* call the registered extension handlers. */ extern SECStatus ssl3_HandleHelloExtensions(sslSocket *ss, SSL3Opaque **b, PRUint32 *length); /* Hello Extension related routines. */ extern PRBool ssl3_ExtensionNegotiated(sslSocket *ss, PRUint16 ex_type); extern SECStatus ssl3_SetSIDSessionTicket(sslSessionID *sid, NewSessionTicket *session_ticket); extern SECStatus ssl3_SendNewSessionTicket(sslSocket *ss); extern PRBool ssl_GetSessionTicketKeys(unsigned char *keyName, unsigned char *encKey, unsigned char *macKey); extern PRBool ssl_GetSessionTicketKeysPKCS11(SECKEYPrivateKey *svrPrivKey, SECKEYPublicKey *svrPubKey, void *pwArg, unsigned char *keyName, PK11SymKey **aesKey, PK11SymKey **macKey); /* Tell clients to consider tickets valid for this long. */ #define TLS_EX_SESS_TICKET_LIFETIME_HINT (2 * 24 * 60 * 60) /* 2 days */ #define TLS_EX_SESS_TICKET_VERSION (0x0100) /* Construct a new NSPR socket for the app to use */ extern PRFileDesc *ssl_NewPRSocket(sslSocket *ss, PRFileDesc *fd); extern void ssl_FreePRSocket(PRFileDesc *fd); /* Internal config function so SSL2 can initialize the present state of * various ciphers */ extern int ssl3_config_match_init(sslSocket *); /* Create a new ref counted key pair object from two keys. */ extern ssl3KeyPair * ssl3_NewKeyPair( SECKEYPrivateKey * privKey, SECKEYPublicKey * pubKey); /* get a new reference (bump ref count) to an ssl3KeyPair. */ extern ssl3KeyPair * ssl3_GetKeyPairRef(ssl3KeyPair * keyPair); /* Decrement keypair's ref count and free if zero. */ extern void ssl3_FreeKeyPair(ssl3KeyPair * keyPair); /* calls for accessing wrapping keys across processes. */ extern PRBool ssl_GetWrappingKey( PRInt32 symWrapMechIndex, SSL3KEAType exchKeyType, SSLWrappedSymWrappingKey *wswk); /* The caller passes in the new value it wants * to set. This code tests the wrapped sym key entry in the file on disk. * If it is uninitialized, this function writes the caller's value into * the disk entry, and returns false. * Otherwise, it overwrites the caller's wswk with the value obtained from * the disk, and returns PR_TRUE. * This is all done while holding the locks/semaphores necessary to make * the operation atomic. */ extern PRBool ssl_SetWrappingKey(SSLWrappedSymWrappingKey *wswk); /* get rid of the symmetric wrapping key references. */ extern SECStatus SSL3_ShutdownServerCache(void); extern SECStatus ssl_InitSymWrapKeysLock(void); extern SECStatus ssl_FreeSymWrapKeysLock(void); extern SECStatus ssl_InitSessionCacheLocks(PRBool lazyInit); extern SECStatus ssl_FreeSessionCacheLocks(void); /********************** misc calls *********************/ extern int ssl_MapLowLevelError(int hiLevelError); extern PRUint32 ssl_Time(void); extern void SSL_AtomicIncrementLong(long * x); SECStatus SSL_DisableDefaultExportCipherSuites(void); SECStatus SSL_DisableExportCipherSuites(PRFileDesc * fd); PRBool SSL_IsExportCipherSuite(PRUint16 cipherSuite); #ifdef TRACE #define SSL_TRACE(msg) ssl_Trace msg #else #define SSL_TRACE(msg) #endif void ssl_Trace(const char *format, ...); SEC_END_PROTOS #if defined(XP_UNIX) || defined(XP_OS2) || defined(XP_BEOS) #define SSL_GETPID getpid #elif defined(_WIN32_WCE) #define SSL_GETPID GetCurrentProcessId #elif defined(WIN32) extern int __cdecl _getpid(void); #define SSL_GETPID _getpid #else #define SSL_GETPID() 0 #endif #endif /* __sslimpl_h_ */