/* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Bookmarks Sync. * * The Initial Developer of the Original Code is Mozilla. * Portions created by the Initial Developer are Copyright (C) 2007 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Dan Mills * Anant Narayanan * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ const EXPORTED_SYMBOLS = ["Resource"]; const Cc = Components.classes; const Ci = Components.interfaces; const Cr = Components.results; const Cu = Components.utils; Cu.import("resource://weave/ext/Observers.js"); Cu.import("resource://weave/ext/Preferences.js"); Cu.import("resource://weave/ext/Sync.js"); Cu.import("resource://weave/log4moz.js"); Cu.import("resource://weave/constants.js"); Cu.import("resource://weave/util.js"); Cu.import("resource://weave/auth.js"); // = Resource = // // Represents a remote network resource, identified by a URI. function Resource(uri) { this._log = Log4Moz.repository.getLogger(this._logName); this._log.level = Log4Moz.Level[Utils.prefs.getCharPref("log.logger.network.resources")]; this.uri = uri; this._headers = {}; } Resource.prototype = { _logName: "Net.Resource", // ** {{{ Resource.serverTime }}} ** // // Caches the latest server timestamp (X-Weave-Timestamp header). serverTime: null, // ** {{{ Resource.authenticator }}} ** // // Getter and setter for the authenticator module // responsible for this particular resource. The authenticator // module may modify the headers to perform authentication // while performing a request for the resource, for example. get authenticator() { if (this._authenticator) return this._authenticator; else return Auth.lookupAuthenticator(this.spec); }, set authenticator(value) { this._authenticator = value; }, // ** {{{ Resource.headers }}} ** // // Headers to be included when making a request for the resource. // Note: Header names should be all lower case, there's no explicit // check for duplicates due to case! get headers() { return this.authenticator.onRequest(this._headers); }, set headers(value) { this._headers = value; }, setHeader: function Res_setHeader() { if (arguments.length % 2) throw "setHeader only accepts arguments in multiples of 2"; for (let i = 0; i < arguments.length; i += 2) { this._headers[arguments[i].toLowerCase()] = arguments[i + 1]; } }, // ** {{{ Resource.uri }}} ** // // URI representing this resource. get uri() { return this._uri; }, set uri(value) { if (typeof value == 'string') this._uri = Utils.makeURI(value); else this._uri = value; }, // ** {{{ Resource.spec }}} ** // // Get the string representation of the URI. get spec() { if (this._uri) return this._uri.spec; return null; }, // ** {{{ Resource.data }}} ** // // Get and set the data encapulated in the resource. _data: null, get data() this._data, set data(value) { this._data = value; }, // ** {{{ Resource._createRequest }}} ** // // This method returns a new IO Channel for requests to be made // through. It is never called directly, only {{{_request}}} uses it // to obtain a request channel. // _createRequest: function Res__createRequest() { let channel = Svc.IO.newChannel(this.spec, null, null). QueryInterface(Ci.nsIRequest).QueryInterface(Ci.nsIHttpChannel); // Always validate the cache: channel.loadFlags |= Ci.nsIRequest.LOAD_BYPASS_CACHE; channel.loadFlags |= Ci.nsIRequest.INHIBIT_CACHING; // Setup a callback to handle bad HTTPS certificates. channel.notificationCallbacks = new BadCertListener(); // Avoid calling the authorizer more than once let headers = this.headers; for (let key in headers) { if (key == 'Authorization') this._log.trace("HTTP Header " + key + ": ***** (suppressed)"); else this._log.trace("HTTP Header " + key + ": " + headers[key]); channel.setRequestHeader(key, headers[key], false); } return channel; }, _onProgress: function Res__onProgress(channel) {}, // ** {{{ Resource._request }}} ** // // Perform a particular HTTP request on the resource. This method // is never called directly, but is used by the high-level // {{{get}}}, {{{put}}}, {{{post}}} and {{delete}} methods. _request: function Res__request(action, data) { let iter = 0; let channel = this._createRequest(); if ("undefined" != typeof(data)) this._data = data; // PUT and POST are trreated differently because // they have payload data. if ("PUT" == action || "POST" == action) { // Convert non-string bodies into JSON if (this._data.constructor.toString() != String) this._data = JSON.stringify(this._data); this._log.debug(action + " Length: " + this._data.length); this._log.trace(action + " Body: " + this._data); let type = ('content-type' in this._headers) ? this._headers['content-type'] : 'text/plain'; let stream = Cc["@mozilla.org/io/string-input-stream;1"]. createInstance(Ci.nsIStringInputStream); stream.setData(this._data, this._data.length); channel.QueryInterface(Ci.nsIUploadChannel); channel.setUploadStream(stream, type, this._data.length); } // Setup a channel listener so that the actual network operation // is performed asynchronously. let [chanOpen, chanCb] = Sync.withCb(channel.asyncOpen, channel); let listener = new ChannelListener(chanCb, this._onProgress, this._log); channel.requestMethod = action; // The channel listener might get a failure code try { this._data = chanOpen(listener, null); } catch(ex) { // Combine the channel stack with this request stack let error = Error(ex.message); let chanStack = []; if (ex.stack) chanStack = ex.stack.trim().split(/\n/).slice(1); let requestStack = error.stack.split(/\n/).slice(1); // Strip out the args for the last 2 frames because they're usually HUGE! for (let i = 0; i <= 1; i++) requestStack[i] = requestStack[i].replace(/\(".*"\)@/, "(...)@"); error.stack = chanStack.concat(requestStack).join("\n"); throw error; } // Set some default values in-case there's no response header let headers = {}; let status = 0; let success = true; try { // Read out the response headers if available channel.visitResponseHeaders({ visitHeader: function visitHeader(header, value) { headers[header.toLowerCase()] = value; } }); status = channel.responseStatus; success = channel.requestSucceeded; // Log the status of the request let mesg = [action, success ? "success" : "fail", status, channel.URI.spec].join(" "); if (mesg.length > 200) mesg = mesg.substr(0, 200) + "…"; this._log.debug(mesg); // Additionally give the full response body when Trace logging if (this._log.level <= Log4Moz.Level.Trace) this._log.trace(action + " body: " + this._data); // this is a server-side safety valve to allow slowing down clients without hurting performance if (headers["x-weave-backoff"]) Observers.notify("weave:service:backoff:interval", parseInt(headers["x-weave-backoff"], 10)) } // Got a response but no header; must be cached (use default values) catch(ex) { this._log.debug(action + " cached: " + status); } let ret = new String(this._data); ret.headers = headers; ret.status = status; ret.success = success; // Make a lazy getter to convert the json response into an object Utils.lazy2(ret, "obj", function() JSON.parse(ret)); // Notify if we get a 401 to maybe try again with a new uri if (status == 401) { // Create an object to allow observers to decide if we should try again let subject = { newUri: "", resource: this, response: ret } Observers.notify("weave:resource:status:401", subject); // Do the same type of request but with the new uri if (subject.newUri != "") { this.uri = subject.newUri; return this._request.apply(this, arguments); } } return ret; }, // ** {{{ Resource.get }}} ** // // Perform an asynchronous HTTP GET for this resource. // onComplete will be called on completion of the request. get: function Res_get() { return this._request("GET"); }, // ** {{{ Resource.get }}} ** // // Perform a HTTP PUT for this resource. put: function Res_put(data) { return this._request("PUT", data); }, // ** {{{ Resource.post }}} ** // // Perform a HTTP POST for this resource. post: function Res_post(data) { return this._request("POST", data); }, // ** {{{ Resource.delete }}} ** // // Perform a HTTP DELETE for this resource. delete: function Res_delete() { return this._request("DELETE"); } }; // = ChannelListener = // // This object implements the {{{nsIStreamListener}}} interface // and is called as the network operation proceeds. function ChannelListener(onComplete, onProgress, logger) { this._onComplete = onComplete; this._onProgress = onProgress; this._log = logger; this.delayAbort(); } ChannelListener.prototype = { // Wait 5 minutes before killing a request ABORT_TIMEOUT: 300000, onStartRequest: function Channel_onStartRequest(channel) { channel.QueryInterface(Ci.nsIHttpChannel); // Save the latest server timestamp when possible try { Resource.serverTime = channel.getResponseHeader("X-Weave-Timestamp") - 0; } catch(ex) {} this._log.trace(channel.requestMethod + " " + channel.URI.spec); this._data = ''; this.delayAbort(); }, onStopRequest: function Channel_onStopRequest(channel, context, status) { // Clear the abort timer now that the channel is done this.abortTimer.clear(); if (this._data == '') this._data = null; // Throw the failure code name (and stop execution) if (!Components.isSuccessCode(status)) this._onComplete.throw(Error(Components.Exception("", status).name)); this._onComplete(this._data); }, onDataAvailable: function Channel_onDataAvail(req, cb, stream, off, count) { let siStream = Cc["@mozilla.org/scriptableinputstream;1"]. createInstance(Ci.nsIScriptableInputStream); siStream.init(stream); this._data += siStream.read(count); this._onProgress(); this.delayAbort(); }, /** * Create or push back the abort timer that kills this request */ delayAbort: function delayAbort() { Utils.delay(this.abortRequest, this.ABORT_TIMEOUT, this, "abortTimer"); }, abortRequest: function abortRequest() { // Ignore any callbacks if we happen to get any now this.onStopRequest = function() {}; this.onDataAvailable = function() {}; this._onComplete.throw(Error("Aborting due to channel inactivity.")); } }; // = BadCertListener = // // We use this listener to ignore bad HTTPS // certificates and continue a request on a network // channel. Probably not a very smart thing to do, // but greatly simplifies debugging and is just very // convenient. function BadCertListener() { } BadCertListener.prototype = { getInterface: function(aIID) { return this.QueryInterface(aIID); }, QueryInterface: function(aIID) { if (aIID.equals(Components.interfaces.nsIBadCertListener2) || aIID.equals(Components.interfaces.nsIInterfaceRequestor) || aIID.equals(Components.interfaces.nsISupports)) return this; throw Components.results.NS_ERROR_NO_INTERFACE; }, notifyCertProblem: function certProblem(socketInfo, sslStatus, targetHost) { // Silently ignore? let log = Log4Moz.repository.getLogger("Service.CertListener"); log.level = Log4Moz.Level[Utils.prefs.getCharPref("log.logger.network.resources")]; log.debug("Invalid HTTPS certificate encountered, ignoring!"); return true; } };