/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is mozilla.org code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Roland Mainz * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "nsPrintEngine.h" #include "nsIStringBundle.h" #include "nsReadableUtils.h" #include "nsCRT.h" #include "nsISelection.h" #include "nsIScriptGlobalObject.h" #include "nsPIDOMWindow.h" #include "nsIDocShell.h" #include "nsIURI.h" #include "nsContentErrors.h" // Print Options #include "nsIPrintSettings.h" #include "nsIPrintSettingsService.h" #include "nsIPrintOptions.h" #include "nsIPrintSession.h" #include "nsGfxCIID.h" #include "nsIServiceManager.h" #include "nsGkAtoms.h" #include "nsXPCOM.h" #include "nsISupportsPrimitives.h" static const char sPrintSettingsServiceContractID[] = "@mozilla.org/gfx/printsettings-service;1"; // Printing Events #include "nsPrintPreviewListener.h" #include "nsThreadUtils.h" // Printing #include "nsIWebBrowserPrint.h" #include "nsIDOMHTMLFrameElement.h" #include "nsIDOMHTMLFrameSetElement.h" #include "nsIDOMHTMLIFrameElement.h" #include "nsIDOMHTMLObjectElement.h" #include "nsIDOMHTMLEmbedElement.h" // Print Preview #include "imgIContainer.h" // image animation mode constants #include "nsIWebBrowserPrint.h" // needed for PrintPreview Navigation constants // Print Progress #include "nsIPrintProgress.h" #include "nsIPrintProgressParams.h" #include "nsIObserver.h" // Print error dialog #include "nsIPrompt.h" #include "nsIWindowWatcher.h" #include "nsIStringBundle.h" // Printing Prompts #include "nsIPrintingPromptService.h" static const char kPrintingPromptService[] = "@mozilla.org/embedcomp/printingprompt-service;1"; // Printing Timer #include "nsPagePrintTimer.h" // FrameSet #include "nsIDocument.h" // Focus #include "nsIDOMEventTarget.h" #include "nsIDOMFocusListener.h" #include "nsISelectionController.h" // Misc #include "nsISupportsUtils.h" #include "nsIFrame.h" #include "nsIScriptContext.h" #include "nsILinkHandler.h" #include "nsIDOMDocument.h" #include "nsISelectionListener.h" #include "nsISelectionPrivate.h" #include "nsIDOMHTMLDocument.h" #include "nsIDOMNSDocument.h" #include "nsIDOMNSHTMLDocument.h" #include "nsIDOMHTMLCollection.h" #include "nsIDOMHTMLElement.h" #include "nsIDOMRange.h" #include "nsContentCID.h" #include "nsLayoutCID.h" #include "nsContentUtils.h" #include "nsIPresShell.h" #include "nsLayoutUtils.h" #include "nsViewsCID.h" #include "nsWidgetsCID.h" #include "nsIDeviceContext.h" #include "nsIDeviceContextSpec.h" #include "nsIViewManager.h" #include "nsIView.h" #include "nsIPageSequenceFrame.h" #include "nsIURL.h" #include "nsIContentViewerEdit.h" #include "nsIContentViewerFile.h" #include "nsIMarkupDocumentViewer.h" #include "nsIInterfaceRequestor.h" #include "nsIInterfaceRequestorUtils.h" #include "nsIDocShellTreeItem.h" #include "nsIDocShellTreeNode.h" #include "nsIDocShellTreeOwner.h" #include "nsIWebBrowserChrome.h" #include "nsIDocShell.h" #include "nsIBaseWindow.h" #include "nsIFrameDebug.h" #include "nsILayoutHistoryState.h" #include "nsFrameManager.h" #include "nsIParser.h" #include "nsGUIEvent.h" #include "nsHTMLReflowState.h" #include "nsIDOMHTMLAnchorElement.h" #include "nsIDOMHTMLAreaElement.h" #include "nsIDOMHTMLLinkElement.h" #include "nsIDOMHTMLImageElement.h" #include "nsIContentViewerContainer.h" #include "nsIContentViewer.h" #include "nsIDocumentViewerPrint.h" #include "nsPIDOMWindow.h" #include "nsFocusManager.h" #include "nsCDefaultURIFixup.h" #include "nsIURIFixup.h" //----------------------------------------------------- // PR LOGGING #ifdef MOZ_LOGGING #define FORCE_PR_LOG /* Allow logging in the release build */ #endif #include "prlog.h" #ifdef PR_LOGGING #ifdef NS_DEBUG // PR_LOGGING is force to always be on (even in release builds) // but we only want some of it on, //#define EXTENDED_DEBUG_PRINTING #endif #define DUMP_LAYOUT_LEVEL 9 // this turns on the dumping of each doucment's layout info static PRLogModuleInfo * kPrintingLogMod = PR_NewLogModule("printing"); #define PR_PL(_p1) PR_LOG(kPrintingLogMod, PR_LOG_DEBUG, _p1); #ifdef EXTENDED_DEBUG_PRINTING static PRUint32 gDumpFileNameCnt = 0; static PRUint32 gDumpLOFileNameCnt = 0; #endif #define PRT_YESNO(_p) ((_p)?"YES":"NO") static const char * gFrameTypesStr[] = {"eDoc", "eFrame", "eIFrame", "eFrameSet"}; static const char * gPrintFrameTypeStr[] = {"kNoFrames", "kFramesAsIs", "kSelectedFrame", "kEachFrameSep"}; static const char * gFrameHowToEnableStr[] = {"kFrameEnableNone", "kFrameEnableAll", "kFrameEnableAsIsAndEach"}; static const char * gPrintRangeStr[] = {"kRangeAllPages", "kRangeSpecifiedPageRange", "kRangeSelection", "kRangeFocusFrame"}; #else #define PRT_YESNO(_p) #define PR_PL(_p1) #endif #ifdef EXTENDED_DEBUG_PRINTING // Forward Declarations static void DumpPrintObjectsListStart(const char * aStr, nsTArray * aDocList); static void DumpPrintObjectsTree(nsPrintObject * aPO, int aLevel= 0, FILE* aFD = nsnull); static void DumpPrintObjectsTreeLayout(nsPrintObject * aPO,nsIDeviceContext * aDC, int aLevel= 0, FILE * aFD = nsnull); #define DUMP_DOC_LIST(_title) DumpPrintObjectsListStart((_title), mPrt->mPrintDocList); #define DUMP_DOC_TREE DumpPrintObjectsTree(mPrt->mPrintObject); #define DUMP_DOC_TREELAYOUT DumpPrintObjectsTreeLayout(mPrt->mPrintObject, mPrt->mPrintDC); #else #define DUMP_DOC_LIST(_title) #define DUMP_DOC_TREE #define DUMP_DOC_TREELAYOUT #endif class nsScriptSuppressor { public: nsScriptSuppressor(nsPrintEngine* aPrintEngine) : mPrintEngine(aPrintEngine), mSuppressed(PR_FALSE) {} ~nsScriptSuppressor() { Unsuppress(); } void Suppress() { if (mPrintEngine) { mSuppressed = PR_TRUE; mPrintEngine->TurnScriptingOn(PR_FALSE); } } void Unsuppress() { if (mPrintEngine && mSuppressed) { mPrintEngine->TurnScriptingOn(PR_TRUE); } mSuppressed = PR_FALSE; } void Disconnect() { mPrintEngine = nsnull; } protected: nsRefPtr mPrintEngine; PRBool mSuppressed; }; // Class IDs static NS_DEFINE_CID(kViewManagerCID, NS_VIEW_MANAGER_CID); static NS_DEFINE_CID(kWidgetCID, NS_CHILD_CID); NS_IMPL_ISUPPORTS1(nsPrintEngine, nsIObserver) //--------------------------------------------------- //-- nsPrintEngine Class Impl //--------------------------------------------------- nsPrintEngine::nsPrintEngine() : mIsCreatingPrintPreview(PR_FALSE), mIsDoingPrinting(PR_FALSE), mIsDoingPrintPreview(PR_FALSE), mProgressDialogIsShown(PR_FALSE), mContainer(nsnull), mDeviceContext(nsnull), mPrt(nsnull), mPagePrintTimer(nsnull), mPageSeqFrame(nsnull), mParentWidget(nsnull), mPrtPreview(nsnull), mOldPrtPreview(nsnull), mDebugFile(nsnull) { } //------------------------------------------------------- nsPrintEngine::~nsPrintEngine() { Destroy(); // for insurance } //------------------------------------------------------- void nsPrintEngine::Destroy() { if (mPrt) { delete mPrt; mPrt = nsnull; } #ifdef NS_PRINT_PREVIEW if (mPrtPreview) { delete mPrtPreview; mPrtPreview = nsnull; } // This is insruance if (mOldPrtPreview) { delete mOldPrtPreview; mOldPrtPreview = nsnull; } #endif mDocViewerPrint = nsnull; } //------------------------------------------------------- void nsPrintEngine::DestroyPrintingData() { if (mPrt) { delete mPrt; mPrt = nsnull; } } //--------------------------------------------------------------------------------- //-- Section: Methods needed by the DocViewer //--------------------------------------------------------------------------------- //-------------------------------------------------------- nsresult nsPrintEngine::Initialize(nsIDocumentViewerPrint* aDocViewerPrint, nsISupports* aContainer, nsIDocument* aDocument, nsIDeviceContext* aDevContext, nsIWidget* aParentWidget, FILE* aDebugFile) { NS_ENSURE_ARG_POINTER(aDocViewerPrint); NS_ENSURE_ARG_POINTER(aContainer); NS_ENSURE_ARG_POINTER(aDocument); NS_ENSURE_ARG_POINTER(aDevContext); NS_ENSURE_ARG_POINTER(aParentWidget); mDocViewerPrint = aDocViewerPrint; mContainer = aContainer; // weak reference mDocument = aDocument; mDeviceContext = aDevContext; // weak reference mParentWidget = aParentWidget; mDebugFile = aDebugFile; // ok to be NULL return NS_OK; } //------------------------------------------------------- PRBool nsPrintEngine::CheckBeforeDestroy() { if (mPrt && mPrt->mPreparingForPrint) { mPrt->mDocWasToBeDestroyed = PR_TRUE; return PR_TRUE; } return PR_FALSE; } //------------------------------------------------------- nsresult nsPrintEngine::Cancelled() { if (mPrt && mPrt->mPrintSettings) { return mPrt->mPrintSettings->SetIsCancelled(PR_TRUE); } return NS_ERROR_FAILURE; } //------------------------------------------------------- // Install our event listeners on the document to prevent // some events from being processed while in PrintPreview // // No return code - if this fails, there isn't much we can do void nsPrintEngine::InstallPrintPreviewListener() { if (!mPrt->mPPEventListeners) { nsCOMPtr win(do_GetInterface(mContainer)); nsCOMPtr target(do_QueryInterface(win->GetFrameElementInternal())); mPrt->mPPEventListeners = new nsPrintPreviewListener(target); if (mPrt->mPPEventListeners) { mPrt->mPPEventListeners->AddListeners(); } } } //---------------------------------------------------------------------- nsresult nsPrintEngine::GetSeqFrameAndCountPagesInternal(nsPrintObject* aPO, nsIFrame*& aSeqFrame, PRInt32& aCount) { NS_ENSURE_ARG_POINTER(aPO); // Finds the SimplePageSequencer frame nsIPageSequenceFrame* seqFrame = nsnull; aPO->mPresShell->GetPageSequenceFrame(&seqFrame); if (seqFrame) { aSeqFrame = do_QueryFrame(seqFrame); } else { aSeqFrame = nsnull; } if (aSeqFrame == nsnull) return NS_ERROR_FAILURE; // first count the total number of pages aCount = 0; nsIFrame* pageFrame = aSeqFrame->GetFirstChild(nsnull); while (pageFrame != nsnull) { aCount++; pageFrame = pageFrame->GetNextSibling(); } return NS_OK; } //----------------------------------------------------------------- nsresult nsPrintEngine::GetSeqFrameAndCountPages(nsIFrame*& aSeqFrame, PRInt32& aCount) { NS_ASSERTION(mPrtPreview, "mPrtPreview can't be null!"); return GetSeqFrameAndCountPagesInternal(mPrtPreview->mPrintObject, aSeqFrame, aCount); } //--------------------------------------------------------------------------------- //-- Done: Methods needed by the DocViewer //--------------------------------------------------------------------------------- //--------------------------------------------------------------------------------- //-- Section: nsIWebBrowserPrint //--------------------------------------------------------------------------------- // Foward decl for Debug Helper Functions #ifdef EXTENDED_DEBUG_PRINTING static int RemoveFilesInDir(const char * aDir); static void GetDocTitleAndURL(nsPrintObject* aPO, char *& aDocStr, char *& aURLStr); static void DumpPrintObjectsTree(nsPrintObject * aPO, int aLevel, FILE* aFD); static void DumpPrintObjectsList(nsTArray * aDocList); static void RootFrameList(nsPresContext* aPresContext, FILE* out, PRInt32 aIndent); static void DumpViews(nsIDocShell* aDocShell, FILE* out); static void DumpLayoutData(char* aTitleStr, char* aURLStr, nsPresContext* aPresContext, nsIDeviceContext * aDC, nsIFrame * aRootFrame, nsIDocShell * aDocShell, FILE* aFD); #endif //-------------------------------------------------------------------------------- nsresult nsPrintEngine::CommonPrint(PRBool aIsPrintPreview, nsIPrintSettings* aPrintSettings, nsIWebProgressListener* aWebProgressListener) { nsresult rv = DoCommonPrint(aIsPrintPreview, aPrintSettings, aWebProgressListener); if (NS_FAILED(rv)) { if (aIsPrintPreview) { SetIsCreatingPrintPreview(PR_FALSE); SetIsPrintPreview(PR_FALSE); } else { SetIsPrinting(PR_FALSE); } if (mProgressDialogIsShown) CloseProgressDialog(aWebProgressListener); if (rv != NS_ERROR_ABORT && rv != NS_ERROR_OUT_OF_MEMORY) ShowPrintErrorDialog(rv, !aIsPrintPreview); delete mPrt; mPrt = nsnull; } return rv; } nsresult nsPrintEngine::DoCommonPrint(PRBool aIsPrintPreview, nsIPrintSettings* aPrintSettings, nsIWebProgressListener* aWebProgressListener) { nsresult rv; if (aIsPrintPreview) { // The WebProgressListener can be QI'ed to nsIPrintingPromptService // then that means the progress dialog is already being shown. nsCOMPtr pps(do_QueryInterface(aWebProgressListener)); mProgressDialogIsShown = pps != nsnull; if (mIsDoingPrintPreview) { mOldPrtPreview = mPrtPreview; mPrtPreview = nsnull; } } else { mProgressDialogIsShown = PR_FALSE; } mPrt = new nsPrintData(aIsPrintPreview ? nsPrintData::eIsPrintPreview : nsPrintData::eIsPrinting); NS_ENSURE_TRUE(mPrt, NS_ERROR_OUT_OF_MEMORY); // if they don't pass in a PrintSettings, then get the Global PS mPrt->mPrintSettings = aPrintSettings; if (!mPrt->mPrintSettings) { rv = GetGlobalPrintSettings(getter_AddRefs(mPrt->mPrintSettings)); NS_ENSURE_SUCCESS(rv, rv); } rv = CheckForPrinters(mPrt->mPrintSettings); NS_ENSURE_SUCCESS(rv, rv); mPrt->mPrintSettings->SetIsCancelled(PR_FALSE); mPrt->mPrintSettings->GetShrinkToFit(&mPrt->mShrinkToFit); if (aIsPrintPreview) { SetIsCreatingPrintPreview(PR_TRUE); SetIsPrintPreview(PR_TRUE); nsCOMPtr viewer = do_QueryInterface(mDocViewerPrint); if (viewer) { viewer->SetTextZoom(1.0f); viewer->SetFullZoom(1.0f); } } else { SetIsPrinting(PR_TRUE); } // Create a print session and let the print settings know about it. // The print settings hold an nsWeakPtr to the session so it does not // need to be cleared from the settings at the end of the job. // XXX What lifetime does the printSession need to have? nsCOMPtr printSession; if (!aIsPrintPreview) { printSession = do_CreateInstance("@mozilla.org/gfx/printsession;1", &rv); NS_ENSURE_SUCCESS(rv, rv); mPrt->mPrintSettings->SetPrintSession(printSession); } if (aWebProgressListener != nsnull) { mPrt->mPrintProgressListeners.AppendObject(aWebProgressListener); } // Get the currently focused window and cache it // because the Print Dialog will "steal" focus and later when you try // to get the currently focused windows it will be NULL mPrt->mCurrentFocusWin = FindFocusedDOMWindow(); // Check to see if there is a "regular" selection PRBool isSelection = IsThereARangeSelection(mPrt->mCurrentFocusWin); // Get the docshell for this documentviewer nsCOMPtr webContainer(do_QueryInterface(mContainer, &rv)); NS_ENSURE_SUCCESS(rv, rv); mPrt->mPrintObject = new nsPrintObject(); NS_ENSURE_TRUE(mPrt->mPrintObject, NS_ERROR_OUT_OF_MEMORY); rv = mPrt->mPrintObject->Init(webContainer); NS_ENSURE_SUCCESS(rv, rv); NS_ENSURE_TRUE(mPrt->mPrintDocList.AppendElement(mPrt->mPrintObject), NS_ERROR_OUT_OF_MEMORY); mPrt->mIsParentAFrameSet = IsParentAFrameSet(webContainer); mPrt->mPrintObject->mFrameType = mPrt->mIsParentAFrameSet ? eFrameSet : eDoc; // Build the "tree" of PrintObjects nsCOMPtr parentAsNode(do_QueryInterface(webContainer)); BuildDocTree(parentAsNode, &mPrt->mPrintDocList, mPrt->mPrintObject); // XXX This isn't really correct... if (!mPrt->mPrintObject->mDocument->GetRootContent()) return NS_ERROR_GFX_PRINTER_STARTDOC; // Create the linkage from the sub-docs back to the content element // in the parent document MapContentToWebShells(mPrt->mPrintObject, mPrt->mPrintObject); mPrt->mIsIFrameSelected = IsThereAnIFrameSelected(webContainer, mPrt->mCurrentFocusWin, mPrt->mIsParentAFrameSet); // Setup print options for UI if (mPrt->mIsParentAFrameSet) { if (mPrt->mCurrentFocusWin) { mPrt->mPrintSettings->SetHowToEnableFrameUI(nsIPrintSettings::kFrameEnableAll); } else { mPrt->mPrintSettings->SetHowToEnableFrameUI(nsIPrintSettings::kFrameEnableAsIsAndEach); } } else { mPrt->mPrintSettings->SetHowToEnableFrameUI(nsIPrintSettings::kFrameEnableNone); } // Now determine how to set up the Frame print UI mPrt->mPrintSettings->SetPrintOptions(nsIPrintSettings::kEnableSelectionRB, isSelection || mPrt->mIsIFrameSelected); nsCOMPtr devspec (do_CreateInstance("@mozilla.org/gfx/devicecontextspec;1", &rv)); NS_ENSURE_SUCCESS(rv, rv); nsScriptSuppressor scriptSuppressor(this); if (!aIsPrintPreview) { #ifdef NS_DEBUG mPrt->mDebugFilePtr = mDebugFile; #endif scriptSuppressor.Suppress(); PRBool printSilently; mPrt->mPrintSettings->GetPrintSilent(&printSilently); // Check prefs for a default setting as to whether we should print silently printSilently = nsContentUtils::GetBoolPref("print.always_print_silent", printSilently); // Ask dialog to be Print Shown via the Plugable Printing Dialog Service // This service is for the Print Dialog and the Print Progress Dialog // If printing silently or you can't get the service continue on if (!printSilently) { nsCOMPtr printPromptService(do_GetService(kPrintingPromptService)); if (printPromptService) { nsIDOMWindow *domWin = mDocument->GetWindow(); NS_ENSURE_TRUE(domWin, NS_ERROR_FAILURE); // Platforms not implementing a given dialog for the service may // return NS_ERROR_NOT_IMPLEMENTED or an error code. // // NS_ERROR_NOT_IMPLEMENTED indicates they want default behavior // Any other error code means we must bail out // nsCOMPtr wbp(do_QueryInterface(mDocViewerPrint)); rv = printPromptService->ShowPrintDialog(domWin, wbp, mPrt->mPrintSettings); if (rv == NS_ERROR_NOT_IMPLEMENTED) { // This means the Dialog service was there, // but they choose not to implement this dialog and // are looking for default behavior from the toolkit rv = NS_OK; } else if (NS_SUCCEEDED(rv)) { // since we got the dialog and it worked then make sure we // are telling GFX we want to print silent printSilently = PR_TRUE; } // The user might have changed shrink-to-fit in the print dialog, so update our copy of its state mPrt->mPrintSettings->GetShrinkToFit(&mPrt->mShrinkToFit); } else { rv = NS_ERROR_GFX_NO_PRINTROMPTSERVICE; } } else { // Call any code that requires a run of the event loop. rv = mPrt->mPrintSettings->SetupSilentPrinting(); } // Check explicitly for abort because it's expected if (rv == NS_ERROR_ABORT) return rv; NS_ENSURE_SUCCESS(rv, rv); } rv = devspec->Init(nsnull, mPrt->mPrintSettings, aIsPrintPreview); NS_ENSURE_SUCCESS(rv, rv); mPrt->mPrintDC = do_CreateInstance("@mozilla.org/gfx/devicecontext;1", &rv); NS_ENSURE_SUCCESS(rv, rv); rv = mPrt->mPrintDC->InitForPrinting(devspec); NS_ENSURE_SUCCESS(rv, rv); if (aIsPrintPreview) { mPrt->mPrintSettings->SetPrintFrameType(nsIPrintSettings::kFramesAsIs); // override any UI that wants to PrintPreview any selection or page range // we want to view every page in PrintPreview each time mPrt->mPrintSettings->SetPrintRange(nsIPrintSettings::kRangeAllPages); } else { // Always check and set the print settings first and then fall back // onto the PrintService if there isn't a PrintSettings // // Posiible Usage values: // nsIPrintSettings::kUseInternalDefault // nsIPrintSettings::kUseSettingWhenPossible // // NOTE: The consts are the same for PrintSettings and PrintSettings PRInt16 printFrameTypeUsage = nsIPrintSettings::kUseSettingWhenPossible; mPrt->mPrintSettings->GetPrintFrameTypeUsage(&printFrameTypeUsage); // Ok, see if we are going to use our value and override the default if (printFrameTypeUsage == nsIPrintSettings::kUseSettingWhenPossible) { // Get the Print Options/Settings PrintFrameType to see what is preferred PRInt16 printFrameType = nsIPrintSettings::kEachFrameSep; mPrt->mPrintSettings->GetPrintFrameType(&printFrameType); // Don't let anybody do something stupid like try to set it to // kNoFrames when we are printing a FrameSet if (printFrameType == nsIPrintSettings::kNoFrames) { mPrt->mPrintFrameType = nsIPrintSettings::kEachFrameSep; mPrt->mPrintSettings->SetPrintFrameType(mPrt->mPrintFrameType); } else { // First find out from the PrinService what options are available // to us for Printing FrameSets PRInt16 howToEnableFrameUI; mPrt->mPrintSettings->GetHowToEnableFrameUI(&howToEnableFrameUI); if (howToEnableFrameUI != nsIPrintSettings::kFrameEnableNone) { switch (howToEnableFrameUI) { case nsIPrintSettings::kFrameEnableAll: mPrt->mPrintFrameType = printFrameType; break; case nsIPrintSettings::kFrameEnableAsIsAndEach: if (printFrameType != nsIPrintSettings::kSelectedFrame) { mPrt->mPrintFrameType = printFrameType; } else { // revert back to a good value mPrt->mPrintFrameType = nsIPrintSettings::kEachFrameSep; } break; } // switch mPrt->mPrintSettings->SetPrintFrameType(mPrt->mPrintFrameType); } } } else { mPrt->mPrintSettings->GetPrintFrameType(&mPrt->mPrintFrameType); } } if (aIsPrintPreview) { PRBool notifyOnInit = PR_FALSE; ShowPrintProgress(PR_FALSE, notifyOnInit); // Very important! Turn Off scripting TurnScriptingOn(PR_FALSE); if (!notifyOnInit) { rv = FinishPrintPreview(); } else { rv = NS_OK; } NS_ENSURE_SUCCESS(rv, rv); } else { PRUnichar * docTitleStr; PRUnichar * docURLStr; GetDisplayTitleAndURL(mPrt->mPrintObject, &docTitleStr, &docURLStr, eDocTitleDefURLDoc); // Nobody ever cared about the file name passed in, as far as I can tell rv = mPrt->mPrintDC->PrepareDocument(docTitleStr, nsnull); if (docTitleStr) nsMemory::Free(docTitleStr); if (docURLStr) nsMemory::Free(docURLStr); NS_ENSURE_SUCCESS(rv, rv); PRBool doNotify; ShowPrintProgress(PR_TRUE, doNotify); if (!doNotify) { // Print listener setup... mPrt->OnStartPrinting(); rv = DocumentReadyForPrinting(); NS_ENSURE_SUCCESS(rv, rv); } } // We will enable scripting later after printing has finished. scriptSuppressor.Disconnect(); return NS_OK; } //--------------------------------------------------------------------------------- NS_IMETHODIMP nsPrintEngine::Print(nsIPrintSettings* aPrintSettings, nsIWebProgressListener* aWebProgressListener) { return CommonPrint(PR_FALSE, aPrintSettings, aWebProgressListener); } NS_IMETHODIMP nsPrintEngine::PrintPreview(nsIPrintSettings* aPrintSettings, nsIDOMWindow *aChildDOMWin, nsIWebProgressListener* aWebProgressListener) { // Get the DocShell and see if it is busy // (We can't Print Preview this document if it is still busy) nsCOMPtr docShell(do_QueryInterface(mContainer)); NS_ASSERTION(docShell, "This has to be a docshell"); PRUint32 busyFlags = nsIDocShell::BUSY_FLAGS_NONE; if (NS_FAILED(docShell->GetBusyFlags(&busyFlags)) || busyFlags != nsIDocShell::BUSY_FLAGS_NONE) { CloseProgressDialog(aWebProgressListener); ShowPrintErrorDialog(NS_ERROR_GFX_PRINTER_DOC_IS_BUSY_PP, PR_FALSE); return NS_ERROR_FAILURE; } // Document is not busy -- go ahead with the Print Preview return CommonPrint(PR_TRUE, aPrintSettings, aWebProgressListener); } //---------------------------------------------------------------------------------- /* readonly attribute boolean isFramesetDocument; */ NS_IMETHODIMP nsPrintEngine::GetIsFramesetDocument(PRBool *aIsFramesetDocument) { nsCOMPtr webContainer(do_QueryInterface(mContainer)); *aIsFramesetDocument = IsParentAFrameSet(webContainer); return NS_OK; } //---------------------------------------------------------------------------------- /* readonly attribute boolean isIFrameSelected; */ NS_IMETHODIMP nsPrintEngine::GetIsIFrameSelected(PRBool *aIsIFrameSelected) { *aIsIFrameSelected = PR_FALSE; // Get the docshell for this documentviewer nsCOMPtr webContainer(do_QueryInterface(mContainer)); // Get the currently focused window nsCOMPtr currentFocusWin = FindFocusedDOMWindow(); if (currentFocusWin && webContainer) { // Get whether the doc contains a frameset // Also, check to see if the currently focus docshell // is a child of this docshell PRPackedBool isParentFrameSet; *aIsIFrameSelected = IsThereAnIFrameSelected(webContainer, currentFocusWin, isParentFrameSet); } return NS_OK; } //---------------------------------------------------------------------------------- /* readonly attribute boolean isRangeSelection; */ NS_IMETHODIMP nsPrintEngine::GetIsRangeSelection(PRBool *aIsRangeSelection) { // Get the currently focused window nsCOMPtr currentFocusWin = FindFocusedDOMWindow(); *aIsRangeSelection = IsThereARangeSelection(currentFocusWin); return NS_OK; } //---------------------------------------------------------------------------------- /* readonly attribute boolean isFramesetFrameSelected; */ NS_IMETHODIMP nsPrintEngine::GetIsFramesetFrameSelected(PRBool *aIsFramesetFrameSelected) { // Get the currently focused window nsCOMPtr currentFocusWin = FindFocusedDOMWindow(); *aIsFramesetFrameSelected = currentFocusWin != nsnull; return NS_OK; } //---------------------------------------------------------------------------------- /* readonly attribute long printPreviewNumPages; */ NS_IMETHODIMP nsPrintEngine::GetPrintPreviewNumPages(PRInt32 *aPrintPreviewNumPages) { NS_ENSURE_ARG_POINTER(aPrintPreviewNumPages); nsIFrame* seqFrame = nsnull; *aPrintPreviewNumPages = 0; if (!mPrtPreview || NS_FAILED(GetSeqFrameAndCountPagesInternal(mPrtPreview->mPrintObject, seqFrame, *aPrintPreviewNumPages))) { return NS_ERROR_FAILURE; } return NS_OK; } //---------------------------------------------------------------------------------- // Enumerate all the documents for their titles NS_IMETHODIMP nsPrintEngine::EnumerateDocumentNames(PRUint32* aCount, PRUnichar*** aResult) { NS_ENSURE_ARG(aCount); NS_ENSURE_ARG_POINTER(aResult); *aCount = 0; *aResult = nsnull; PRInt32 numDocs = mPrt->mPrintDocList.Length(); PRUnichar** array = (PRUnichar**) nsMemory::Alloc(numDocs * sizeof(PRUnichar*)); if (!array) return NS_ERROR_OUT_OF_MEMORY; for (PRInt32 i=0;imPrintDocList.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); PRUnichar * docTitleStr; PRUnichar * docURLStr; GetDocumentTitleAndURL(po->mDocument, &docTitleStr, &docURLStr); // Use the URL if the doc is empty if (!docTitleStr || !*docTitleStr) { if (docURLStr && *docURLStr) { nsMemory::Free(docTitleStr); docTitleStr = docURLStr; } else { nsMemory::Free(docURLStr); } docURLStr = nsnull; if (!docTitleStr || !*docTitleStr) { CleanupDocTitleArray(array, i); return NS_ERROR_OUT_OF_MEMORY; } } array[i] = docTitleStr; if (docURLStr) nsMemory::Free(docURLStr); } *aCount = numDocs; *aResult = array; return NS_OK; } //---------------------------------------------------------------------------------- /* readonly attribute nsIPrintSettings globalPrintSettings; */ nsresult nsPrintEngine::GetGlobalPrintSettings(nsIPrintSettings **aGlobalPrintSettings) { NS_ENSURE_ARG_POINTER(aGlobalPrintSettings); nsresult rv = NS_ERROR_FAILURE; nsCOMPtr printSettingsService = do_GetService(sPrintSettingsServiceContractID, &rv); if (NS_SUCCEEDED(rv)) { rv = printSettingsService->GetGlobalPrintSettings(aGlobalPrintSettings); } return rv; } //---------------------------------------------------------------------------------- /* readonly attribute boolean doingPrint; */ NS_IMETHODIMP nsPrintEngine::GetDoingPrint(PRBool *aDoingPrint) { NS_ENSURE_ARG_POINTER(aDoingPrint); *aDoingPrint = mIsDoingPrinting; return NS_OK; } //---------------------------------------------------------------------------------- /* readonly attribute boolean doingPrintPreview; */ NS_IMETHODIMP nsPrintEngine::GetDoingPrintPreview(PRBool *aDoingPrintPreview) { NS_ENSURE_ARG_POINTER(aDoingPrintPreview); *aDoingPrintPreview = mIsDoingPrintPreview; return NS_OK; } //---------------------------------------------------------------------------------- /* readonly attribute nsIPrintSettings currentPrintSettings; */ NS_IMETHODIMP nsPrintEngine::GetCurrentPrintSettings(nsIPrintSettings * *aCurrentPrintSettings) { NS_ENSURE_ARG_POINTER(aCurrentPrintSettings); if (mPrt) { *aCurrentPrintSettings = mPrt->mPrintSettings; } else if (mPrtPreview) { *aCurrentPrintSettings = mPrtPreview->mPrintSettings; } else { *aCurrentPrintSettings = nsnull; } NS_IF_ADDREF(*aCurrentPrintSettings); return NS_OK; } //----------------------------------------------------------------- //-- Section: Pre-Reflow Methods //----------------------------------------------------------------- //--------------------------------------------------------------------- // This method checks to see if there is at least one printer defined // and if so, it sets the first printer in the list as the default name // in the PrintSettings which is then used for Printer Preview nsresult nsPrintEngine::CheckForPrinters(nsIPrintSettings* aPrintSettings) { #ifdef XP_MACOSX // Mac doesn't support retrieving a printer list. return NS_OK; #else NS_ENSURE_ARG_POINTER(aPrintSettings); // See if aPrintSettings already has a printer nsXPIDLString printerName; nsresult rv = aPrintSettings->GetPrinterName(getter_Copies(printerName)); if (NS_SUCCEEDED(rv) && !printerName.IsEmpty()) { return NS_OK; } // aPrintSettings doesn't have a printer set. Try to fetch the default. nsCOMPtr printSettingsService = do_GetService(sPrintSettingsServiceContractID, &rv); NS_ENSURE_SUCCESS(rv, rv); rv = printSettingsService->GetDefaultPrinterName(getter_Copies(printerName)); if (NS_SUCCEEDED(rv) && !printerName.IsEmpty()) { rv = aPrintSettings->SetPrinterName(printerName.get()); } return rv; #endif } //---------------------------------------------------------------------- // Set up to use the "pluggable" Print Progress Dialog void nsPrintEngine::ShowPrintProgress(PRBool aIsForPrinting, PRBool& aDoNotify) { // default to not notifying, that if something here goes wrong // or we aren't going to show the progress dialog we can straight into // reflowing the doc for printing. aDoNotify = PR_FALSE; // Assume we can't do progress and then see if we can PRBool showProgresssDialog = PR_FALSE; // if it is already being shown then don't bother to find out if it should be // so skip this and leave mShowProgressDialog set to FALSE if (!mProgressDialogIsShown) { showProgresssDialog = nsContentUtils::GetBoolPref("print.show_print_progress"); } // Turning off the showing of Print Progress in Prefs overrides // whether the calling PS desire to have it on or off, so only check PS if // prefs says it's ok to be on. if (showProgresssDialog) { mPrt->mPrintSettings->GetShowPrintProgress(&showProgresssDialog); } // Now open the service to get the progress dialog // If we don't get a service, that's ok, then just don't show progress if (showProgresssDialog) { nsCOMPtr printPromptService(do_GetService(kPrintingPromptService)); if (printPromptService) { nsPIDOMWindow *domWin = mDocument->GetWindow(); if (!domWin) return; nsCOMPtr docShellItem = do_QueryInterface(domWin->GetDocShell()); if (!docShellItem) return; nsCOMPtr owner; docShellItem->GetTreeOwner(getter_AddRefs(owner)); nsCOMPtr browserChrome = do_GetInterface(owner); if (!browserChrome) return; PRBool isModal = PR_TRUE; browserChrome->IsWindowModal(&isModal); if (isModal) { // Showing a print progress dialog when printing a modal window // isn't supported. See bug 301560. return; } nsCOMPtr printProgressListener; nsCOMPtr wbp(do_QueryInterface(mDocViewerPrint)); nsresult rv = printPromptService->ShowProgress(domWin, wbp, mPrt->mPrintSettings, this, aIsForPrinting, getter_AddRefs(printProgressListener), getter_AddRefs(mPrt->mPrintProgressParams), &aDoNotify); if (NS_SUCCEEDED(rv)) { if (printProgressListener && mPrt->mPrintProgressParams) { mPrt->mPrintProgressListeners.AppendObject(printProgressListener); SetDocAndURLIntoProgress(mPrt->mPrintObject, mPrt->mPrintProgressParams); } } } } } //--------------------------------------------------------------------- PRBool nsPrintEngine::IsThereARangeSelection(nsIDOMWindow* aDOMWin) { nsCOMPtr presShell; if (aDOMWin) { nsCOMPtr window(do_QueryInterface(aDOMWin)); window->GetDocShell()->GetPresShell(getter_AddRefs(presShell)); } if (!presShell) return PR_FALSE; // check here to see if there is a range selection // so we know whether to turn on the "Selection" radio button nsCOMPtr selection; selection = presShell->GetCurrentSelection(nsISelectionController::SELECTION_NORMAL); if (selection) { PRInt32 count; selection->GetRangeCount(&count); if (count == 1) { nsCOMPtr range; if (NS_SUCCEEDED(selection->GetRangeAt(0, getter_AddRefs(range)))) { // check to make sure it isn't an insertion selection PRBool isCollapsed; selection->GetIsCollapsed(&isCollapsed); return !isCollapsed; } } if (count > 1) return PR_TRUE; } return PR_FALSE; } //--------------------------------------------------------------------- PRBool nsPrintEngine::IsParentAFrameSet(nsIDocShell * aParent) { NS_ASSERTION(aParent, "Pointer is null!"); nsCOMPtr shell; aParent->GetPresShell(getter_AddRefs(shell)); NS_ASSERTION(shell, "shell can't be null"); // See if the incoming doc is the root document nsCOMPtr parentAsItem(do_QueryInterface(aParent)); if (!parentAsItem) return PR_FALSE; // When it is the top level document we need to check // to see if it contains a frameset. If it does, then // we only want to print the doc's children and not the document itself // For anything else we always print all the children and the document // for example, if the doc contains an IFRAME we eant to print the child // document (the IFRAME) and then the rest of the document. // // XXX we really need to search the frame tree, and not the content // but there is no way to distinguish between IFRAMEs and FRAMEs // with the GetFrameType call. // Bug 53459 has been files so we can eventually distinguish // between IFRAME frames and FRAME frames PRBool isFrameSet = PR_FALSE; // only check to see if there is a frameset if there is // NO parent doc for this doc. meaning this parent is the root doc if (shell) { nsIDocument *doc = shell->GetDocument(); if (doc) { nsIContent *rootContent = doc->GetRootContent(); if (rootContent) { isFrameSet = HasFramesetChild(rootContent); } } } return isFrameSet; } //--------------------------------------------------------------------- // Recursively build a list of sub documents to be printed // that mirrors the document tree void nsPrintEngine::BuildDocTree(nsIDocShellTreeNode * aParentNode, nsTArray * aDocList, nsPrintObject * aPO) { NS_ASSERTION(aParentNode, "Pointer is null!"); NS_ASSERTION(aDocList, "Pointer is null!"); NS_ASSERTION(aPO, "Pointer is null!"); PRInt32 childWebshellCount; aParentNode->GetChildCount(&childWebshellCount); if (childWebshellCount > 0) { for (PRInt32 i=0;i child; aParentNode->GetChildAt(i, getter_AddRefs(child)); nsCOMPtr childAsShell(do_QueryInterface(child)); nsCOMPtr viewer; childAsShell->GetContentViewer(getter_AddRefs(viewer)); if (viewer) { nsCOMPtr viewerFile(do_QueryInterface(viewer)); if (viewerFile) { nsCOMPtr childDocShell(do_QueryInterface(child)); nsCOMPtr childNode(do_QueryInterface(child)); nsPrintObject * po = new nsPrintObject(); nsresult rv = po->Init(childDocShell); if (NS_FAILED(rv)) NS_NOTREACHED("Init failed?"); po->mParent = aPO; aPO->mKids.AppendElement(po); aDocList->AppendElement(po); BuildDocTree(childNode, aDocList, po); } } } } } //--------------------------------------------------------------------- void nsPrintEngine::GetDocumentTitleAndURL(nsIDocument* aDoc, PRUnichar** aTitle, PRUnichar** aURLStr) { NS_ASSERTION(aDoc, "Pointer is null!"); NS_ASSERTION(aTitle, "Pointer is null!"); NS_ASSERTION(aURLStr, "Pointer is null!"); *aTitle = nsnull; *aURLStr = nsnull; nsAutoString docTitle; nsCOMPtr doc = do_QueryInterface(aDoc); doc->GetTitle(docTitle); if (!docTitle.IsEmpty()) { *aTitle = ToNewUnicode(docTitle); } nsIURI* url = aDoc->GetDocumentURI(); if (!url) return; nsCOMPtr urifixup(do_GetService(NS_URIFIXUP_CONTRACTID)); if (!urifixup) return; nsCOMPtr exposableURI; urifixup->CreateExposableURI(url, getter_AddRefs(exposableURI)); if (!exposableURI) return; nsCAutoString urlCStr; exposableURI->GetSpec(urlCStr); *aURLStr = UTF8ToNewUnicode(urlCStr); } //--------------------------------------------------------------------- // The walks the PO tree and for each document it walks the content // tree looking for any content that are sub-shells // // It then sets the mContent pointer in the "found" PO object back to the // the document that contained it. void nsPrintEngine::MapContentToWebShells(nsPrintObject* aRootPO, nsPrintObject* aPO) { NS_ASSERTION(aRootPO, "Pointer is null!"); NS_ASSERTION(aPO, "Pointer is null!"); // Recursively walk the content from the root item // XXX Would be faster to enumerate the subdocuments, although right now // nsIDocument doesn't expose quite what would be needed. nsIContent *rootContent = aPO->mDocument->GetRootContent(); if (rootContent) { MapContentForPO(aPO, rootContent); } else { NS_WARNING("Null root content on (sub)document."); } // Continue recursively walking the chilren of this PO for (PRUint32 i=0;imKids.Length();i++) { MapContentToWebShells(aRootPO, aPO->mKids[i]); } } //------------------------------------------------------- // A Frame's sub-doc may contain content or a FrameSet // When it contains a FrameSet the mFrameType for the PrintObject // is always set to an eFrame. Which is fine when printing "AsIs" // but is incorrect when when printing "Each Frame Separately". // When printing "Each Frame Separately" the Frame really acts like // a frameset. // // This method walks the PO tree and checks to see if the PrintObject is // an eFrame and has children that are eFrames (meaning it's a Frame containing a FrameSet) // If so, then the mFrameType need to be changed to eFrameSet // // Also note: We only want to call this we are printing "Each Frame Separately" // when printing "As Is" leave it as an eFrame void nsPrintEngine::CheckForChildFrameSets(nsPrintObject* aPO) { NS_ASSERTION(aPO, "Pointer is null!"); // Continue recursively walking the chilren of this PO PRBool hasChildFrames = PR_FALSE; for (PRUint32 i=0;imKids.Length();i++) { nsPrintObject* po = aPO->mKids[i]; if (po->mFrameType == eFrame) { hasChildFrames = PR_TRUE; CheckForChildFrameSets(po); } } if (hasChildFrames && aPO->mFrameType == eFrame) { aPO->mFrameType = eFrameSet; } } //--------------------------------------------------------------------- // This method is key to the entire print mechanism. // // This "maps" or figures out which sub-doc represents a // given Frame or IFrame in its parent sub-doc. // // So the Mcontent pointer in the child sub-doc points to the // content in the its parent document, that caused it to be printed. // This is used later to (after reflow) to find the absolute location // of the sub-doc on its parent's page frame so it can be // printed in the correct location. // // This method recursvely "walks" the content for a document finding // all the Frames and IFrames, then sets the "mFrameType" data member // which tells us what type of PO we have void nsPrintEngine::MapContentForPO(nsPrintObject* aPO, nsIContent* aContent) { NS_PRECONDITION(aPO && aContent, "Null argument"); nsIDocument* doc = aContent->GetDocument(); NS_ASSERTION(doc, "Content without a document from a document tree?"); nsIDocument* subDoc = doc->GetSubDocumentFor(aContent); if (subDoc) { nsCOMPtr container = subDoc->GetContainer(); nsCOMPtr docShell(do_QueryInterface(container)); if (docShell) { nsPrintObject * po = nsnull; PRInt32 cnt = aPO->mKids.Length(); for (PRInt32 i=0;imKids.ElementAt(i); if (kid->mDocument == subDoc) { po = kid; break; } } // XXX If a subdocument has no onscreen presentation, there will be no PO // This is even if there should be a print presentation if (po) { po->mContent = aContent; nsCOMPtr frame(do_QueryInterface(aContent)); // "frame" elements not in a frameset context should be treated // as iframes if (frame && po->mParent->mFrameType == eFrameSet) { po->mFrameType = eFrame; } else { // Assume something iframe-like, i.e. iframe, object, or embed po->mFrameType = eIFrame; SetPrintAsIs(po, PR_TRUE); NS_ASSERTION(po->mParent, "The root must be a parent"); po->mParent->mPrintAsIs = PR_TRUE; } } } } // walk children content PRUint32 count = aContent->GetChildCount(); for (PRUint32 i = 0; i < count; ++i) { nsIContent *child = aContent->GetChildAt(i); MapContentForPO(aPO, child); } } //--------------------------------------------------------------------- PRBool nsPrintEngine::IsThereAnIFrameSelected(nsIDocShell* aDocShell, nsIDOMWindow* aDOMWin, PRPackedBool& aIsParentFrameSet) { aIsParentFrameSet = IsParentAFrameSet(aDocShell); PRBool iFrameIsSelected = PR_FALSE; if (mPrt && mPrt->mPrintObject) { nsPrintObject* po = FindPrintObjectByDOMWin(mPrt->mPrintObject, aDOMWin); iFrameIsSelected = po && po->mFrameType == eIFrame; } else { // First, check to see if we are a frameset if (!aIsParentFrameSet) { // Check to see if there is a currenlt focused frame // if so, it means the selected frame is either the main docshell // or an IFRAME if (aDOMWin) { // Get the main docshell's DOMWin to see if it matches // the frame that is selected nsCOMPtr domWin = do_GetInterface(aDocShell); if (domWin != aDOMWin) { iFrameIsSelected = PR_TRUE; // we have a selected IFRAME } } } } return iFrameIsSelected; } //--------------------------------------------------------------------- // Recursively sets all the PO items to be printed // from the given item down into the tree void nsPrintEngine::SetPrintPO(nsPrintObject* aPO, PRBool aPrint) { NS_ASSERTION(aPO, "Pointer is null!"); // Set whether to print flag aPO->mDontPrint = !aPrint; for (PRUint32 i=0;imKids.Length();i++) { SetPrintPO(aPO->mKids[i], aPrint); } } //--------------------------------------------------------------------- // This will first use a Title and/or URL from the PrintSettings // if one isn't set then it uses the one from the document // then if not title is there we will make sure we send something back // depending on the situation. void nsPrintEngine::GetDisplayTitleAndURL(nsPrintObject* aPO, PRUnichar** aTitle, PRUnichar** aURLStr, eDocTitleDefault aDefType) { NS_ASSERTION(aPO, "Pointer is null!"); NS_ASSERTION(aTitle, "Pointer is null!"); NS_ASSERTION(aURLStr, "Pointer is null!"); *aTitle = nsnull; *aURLStr = nsnull; if (!mPrt) return; // First check to see if the PrintSettings has defined an alternate title // and use that if it did PRUnichar * docTitleStrPS = nsnull; PRUnichar * docURLStrPS = nsnull; if (mPrt->mPrintSettings) { mPrt->mPrintSettings->GetTitle(&docTitleStrPS); mPrt->mPrintSettings->GetDocURL(&docURLStrPS); if (docTitleStrPS && *docTitleStrPS) { *aTitle = docTitleStrPS; } if (docURLStrPS && *docURLStrPS) { *aURLStr = docURLStrPS; } // short circut if (docTitleStrPS && docURLStrPS) { return; } } PRUnichar* docTitle; PRUnichar* docUrl; GetDocumentTitleAndURL(aPO->mDocument, &docTitle, &docUrl); if (docUrl) { if (!docURLStrPS) *aURLStr = docUrl; else nsMemory::Free(docUrl); } if (docTitle) { if (!docTitleStrPS) *aTitle = docTitle; else nsMemory::Free(docTitle); } else if (!docTitleStrPS) { switch (aDefType) { case eDocTitleDefBlank: *aTitle = ToNewUnicode(EmptyString()); break; case eDocTitleDefURLDoc: if (*aURLStr) { *aTitle = NS_strdup(*aURLStr); } else if (mPrt->mBrandName) { *aTitle = NS_strdup(mPrt->mBrandName); } break; case eDocTitleDefNone: // *aTitle defaults to nsnull break; } } } //--------------------------------------------------------------------- nsresult nsPrintEngine::DocumentReadyForPrinting() { if (mPrt->mPrintFrameType == nsIPrintSettings::kEachFrameSep) { CheckForChildFrameSets(mPrt->mPrintObject); } // // Send the document to the printer... // nsresult rv = SetupToPrintContent(); if (NS_FAILED(rv)) { // The print job was canceled or there was a problem // So remove all other documents from the print list DonePrintingPages(nsnull, rv); } return rv; } /** --------------------------------------------------- * Cleans up when an error occurred */ nsresult nsPrintEngine::CleanupOnFailure(nsresult aResult, PRBool aIsPrinting) { PR_PL(("**** Failed %s - rv 0x%X", aIsPrinting?"Printing":"Print Preview", aResult)); /* cleanup... */ if (mPagePrintTimer) { mPagePrintTimer->Stop(); NS_RELEASE(mPagePrintTimer); } if (aIsPrinting) { SetIsPrinting(PR_FALSE); } else { SetIsPrintPreview(PR_FALSE); SetIsCreatingPrintPreview(PR_FALSE); } /* cleanup done, let's fire-up an error dialog to notify the user * what went wrong... * * When rv == NS_ERROR_ABORT, it means we want out of the * print job without displaying any error messages */ if (aResult != NS_ERROR_ABORT) { ShowPrintErrorDialog(aResult, aIsPrinting); } FirePrintCompletionEvent(); return aResult; } //--------------------------------------------------------------------- void nsPrintEngine::ShowPrintErrorDialog(nsresult aPrintError, PRBool aIsPrinting) { PR_PL(("nsPrintEngine::ShowPrintErrorDialog(nsresult aPrintError=%lx, PRBool aIsPrinting=%d)\n", (long)aPrintError, (int)aIsPrinting)); nsCAutoString stringName; switch(aPrintError) { #define NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(nserr) case nserr: stringName.AssignLiteral(#nserr); break; NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_CMD_NOT_FOUND) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_CMD_FAILURE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_NO_PRINTER_AVAILABLE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_NAME_NOT_FOUND) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_ACCESS_DENIED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_INVALID_ATTRIBUTE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_PRINTER_NOT_READY) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_OUT_OF_PAPER) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_PRINTER_IO_ERROR) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_COULD_NOT_OPEN_FILE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_FILE_IO_ERROR) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_PRINTPREVIEW) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_UNEXPECTED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_OUT_OF_MEMORY) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_NOT_IMPLEMENTED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_NOT_AVAILABLE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_ABORT) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_STARTDOC) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_ENDDOC) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_STARTPAGE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_ENDPAGE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_PRINT_WHILE_PREVIEW) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_PAPER_SIZE_NOT_SUPPORTED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_ORIENTATION_NOT_SUPPORTED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_COLORSPACE_NOT_SUPPORTED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_TOO_MANY_COPIES) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_DRIVER_CONFIGURATION_ERROR) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_DOC_IS_BUSY_PP) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_DOC_WAS_DESTORYED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_NO_PRINTDIALOG_IN_TOOLKIT) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_NO_PRINTROMPTSERVICE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_NO_XUL) // Temporary code for Bug 136185 / bug 240490 NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_PLEX_NOT_SUPPORTED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_DOC_IS_BUSY) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTING_NOT_IMPLEMENTED) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_COULD_NOT_LOAD_PRINT_MODULE) NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_GFX_PRINTER_RESOLUTION_NOT_SUPPORTED) default: NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG(NS_ERROR_FAILURE) #undef NS_ERROR_TO_LOCALIZED_PRINT_ERROR_MSG } PR_PL(("ShowPrintErrorDialog: stringName='%s'\n", stringName.get())); nsXPIDLString msg, title; nsresult rv = nsContentUtils::GetLocalizedString(nsContentUtils::ePRINTING_PROPERTIES, stringName.get(), msg); if (NS_FAILED(rv)) { PR_PL(("GetLocalizedString failed\n")); return; } rv = nsContentUtils::GetLocalizedString(nsContentUtils::ePRINTING_PROPERTIES, aIsPrinting ? "print_error_dialog_title" : "printpreview_error_dialog_title", title); nsCOMPtr wwatch = do_GetService(NS_WINDOWWATCHER_CONTRACTID, &rv); if (NS_FAILED(rv)) { PR_PL(("ShowPrintErrorDialog(): wwatch==nsnull\n")); return; } nsCOMPtr active; wwatch->GetActiveWindow(getter_AddRefs(active)); nsCOMPtr dialog; /* |GetNewPrompter| allows that |active| is |nsnull| * (see bug 234982 ("nsPrintEngine::ShowPrintErrorDialog() fails in many cases")) */ wwatch->GetNewPrompter(active, getter_AddRefs(dialog)); if (!dialog) { PR_PL(("ShowPrintErrorDialog(): dialog==nsnull\n")); return; } dialog->Alert(title.get(), msg.get()); PR_PL(("ShowPrintErrorDialog(): alert displayed successfully.\n")); } //----------------------------------------------------------------- //-- Section: Reflow Methods //----------------------------------------------------------------- //------------------------------------------------------- nsresult nsPrintEngine::SetupToPrintContent() { // In this step we figure out which documents should be printed // i.e. if we are printing the selection then only enable that nsPrintObject // for printing if (NS_FAILED(EnablePOsForPrinting())) { return NS_ERROR_FAILURE; } DUMP_DOC_LIST("\nAfter Enable------------------------------------------"); // This is an Optimization // If we are in PP then we already know all the shrinkage information // so just transfer it to the PrintData and we will skip the extra shrinkage reflow // // doSetPixelScale tells Reflow whether to set the shrinkage value into the DC // The first time we do not want to do this, the second time through we do PRBool doSetPixelScale = PR_FALSE; PRBool ppIsShrinkToFit = mPrtPreview && mPrtPreview->mShrinkToFit; if (ppIsShrinkToFit) { mPrt->mShrinkRatio = mPrtPreview->mShrinkRatio; doSetPixelScale = PR_TRUE; } // Here we reflow all the PrintObjects nsresult rv = ReflowDocList(mPrt->mPrintObject, doSetPixelScale); if (NS_FAILED(rv)) { return NS_ERROR_FAILURE; } // Here is where we do the extra reflow for shrinking the content // But skip this step if we are in PrintPreview if (mPrt->mShrinkToFit && !ppIsShrinkToFit) { // Now look for the PO that has the smallest percent for shrink to fit if (mPrt->mPrintDocList.Length() > 1 && mPrt->mPrintObject->mFrameType == eFrameSet) { nsPrintObject* smallestPO = FindSmallestSTF(); NS_ASSERTION(smallestPO, "There must always be an XMost PO!"); if (smallestPO) { // Calc the shrinkage based on the entire content area mPrt->mShrinkRatio = smallestPO->mShrinkRatio; } } else { // Single document so use the Shrink as calculated for the PO mPrt->mShrinkRatio = mPrt->mPrintObject->mShrinkRatio; } // Only Shrink if we are smaller if (mPrt->mShrinkRatio < 0.998f) { // Clamp Shrink to Fit to 60% mPrt->mShrinkRatio = PR_MAX(mPrt->mShrinkRatio, 0.60f); for (PRUint32 i=0;imPrintDocList.Length();i++) { nsPrintObject* po = mPrt->mPrintDocList.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); // Wipe out the presentation before we reflow po->DestroyPresentation(); } #if (defined(XP_WIN) || defined(XP_OS2)) && defined(EXTENDED_DEBUG_PRINTING) // We need to clear all the output files here // because they will be re-created with second reflow of the docs if (kPrintingLogMod && kPrintingLogMod->level == DUMP_LAYOUT_LEVEL) { RemoveFilesInDir(".\\"); gDumpFileNameCnt = 0; gDumpLOFileNameCnt = 0; } #endif // Here we reflow all the PrintObjects a second time // this time using the shrinkage values // The last param here tells reflow to NOT calc the shrinkage values if (NS_FAILED(ReflowDocList(mPrt->mPrintObject, PR_TRUE))) { return NS_ERROR_FAILURE; } } #ifdef PR_LOGGING { float calcRatio = 0.0f; if (mPrt->mPrintDocList.Length() > 1 && mPrt->mPrintObject->mFrameType == eFrameSet) { nsPrintObject* smallestPO = FindSmallestSTF(); NS_ASSERTION(smallestPO, "There must always be an XMost PO!"); if (smallestPO) { // Calc the shrinkage based on the entire content area calcRatio = smallestPO->mShrinkRatio; } } else { // Single document so use the Shrink as calculated for the PO calcRatio = mPrt->mPrintObject->mShrinkRatio; } PR_PL(("**************************************************************************\n")); PR_PL(("STF Ratio is: %8.5f Effective Ratio: %8.5f Diff: %8.5f\n", mPrt->mShrinkRatio, calcRatio, mPrt->mShrinkRatio-calcRatio)); PR_PL(("**************************************************************************\n")); } #endif } DUMP_DOC_LIST(("\nAfter Reflow------------------------------------------")); PR_PL(("\n")); PR_PL(("-------------------------------------------------------\n")); PR_PL(("\n")); CalcNumPrintablePages(mPrt->mNumPrintablePages); PR_PL(("--- Printing %d pages\n", mPrt->mNumPrintablePages)); DUMP_DOC_TREELAYOUT; // Print listener setup... if (mPrt != nsnull) { mPrt->OnStartPrinting(); } PRUnichar* fileName = nsnull; // check to see if we are printing to a file PRBool isPrintToFile = PR_FALSE; mPrt->mPrintSettings->GetPrintToFile(&isPrintToFile); if (isPrintToFile) { // On some platforms The BeginDocument needs to know the name of the file // and it uses the PrintService to get it, so we need to set it into the PrintService here mPrt->mPrintSettings->GetToFileName(&fileName); } PRUnichar * docTitleStr; PRUnichar * docURLStr; GetDisplayTitleAndURL(mPrt->mPrintObject, &docTitleStr, &docURLStr, eDocTitleDefURLDoc); PRInt32 startPage = 1; PRInt32 endPage = mPrt->mNumPrintablePages; PRInt16 printRangeType = nsIPrintSettings::kRangeAllPages; mPrt->mPrintSettings->GetPrintRange(&printRangeType); if (printRangeType == nsIPrintSettings::kRangeSpecifiedPageRange) { mPrt->mPrintSettings->GetStartPageRange(&startPage); mPrt->mPrintSettings->GetEndPageRange(&endPage); if (endPage > mPrt->mNumPrintablePages) { endPage = mPrt->mNumPrintablePages; } } rv = NS_OK; // BeginDocument may pass back a FAILURE code // i.e. On Windows, if you are printing to a file and hit "Cancel" // to the "File Name" dialog, this comes back as an error // Don't start printing when regression test are executed if (!mPrt->mDebugFilePtr && mIsDoingPrinting) { rv = mPrt->mPrintDC->BeginDocument(docTitleStr, fileName, startPage, endPage); } if (mIsCreatingPrintPreview) { // Print Preview -- Pass ownership of docTitleStr and docURLStr // to the pageSequenceFrame, to be displayed in the header nsIPageSequenceFrame *seqFrame = nsnull; mPrt->mPrintObject->mPresShell->GetPageSequenceFrame(&seqFrame); if (seqFrame) { seqFrame->StartPrint(mPrt->mPrintObject->mPresContext, mPrt->mPrintSettings, docTitleStr, docURLStr); } } else { if (docTitleStr) nsMemory::Free(docTitleStr); if (docURLStr) nsMemory::Free(docURLStr); } PR_PL(("****************** Begin Document ************************\n")); NS_ENSURE_SUCCESS(rv, rv); // This will print the docshell document // when it completes asynchronously in the DonePrintingPages method // it will check to see if there are more docshells to be printed and // then PrintDocContent will be called again. if (mIsDoingPrinting) { PrintDocContent(mPrt->mPrintObject, rv); // ignore return value } return rv; } //------------------------------------------------------- // Recursively reflow each sub-doc and then calc // all the frame locations of the sub-docs nsresult nsPrintEngine::ReflowDocList(nsPrintObject* aPO, PRBool aSetPixelScale) { NS_ENSURE_ARG_POINTER(aPO); // Check to see if the subdocument's element has been hidden by the parent document if (aPO->mParent && aPO->mParent->mPresShell) { nsIFrame * frame = aPO->mParent->mPresShell->GetPrimaryFrameFor(aPO->mContent); if (frame) { if (!frame->GetStyleVisibility()->IsVisible()) { aPO->mDontPrint = PR_TRUE; aPO->mInvisible = PR_TRUE; return NS_OK; } } } // Here is where we set the shrinkage value into the DC // and this is what actually makes it shrink if (aSetPixelScale && aPO->mFrameType != eIFrame) { float ratio; if (mPrt->mPrintFrameType == nsIPrintSettings::kFramesAsIs || mPrt->mPrintFrameType == nsIPrintSettings::kNoFrames) { ratio = mPrt->mShrinkRatio - 0.005f; // round down } else { ratio = aPO->mShrinkRatio - 0.005f; // round down } aPO->mZoomRatio = ratio; } else if (!mPrt->mShrinkToFit) { double scaling; mPrt->mPrintSettings->GetScaling(&scaling); aPO->mZoomRatio = float(scaling); } nsresult rv; // Reflow the PO rv = ReflowPrintObject(aPO); NS_ENSURE_SUCCESS(rv, rv); PRInt32 cnt = aPO->mKids.Length(); for (PRInt32 i=0;imKids[i], aSetPixelScale); NS_ENSURE_SUCCESS(rv, rv); } return NS_OK; } //------------------------------------------------------- // Reflow a nsPrintObject nsresult nsPrintEngine::ReflowPrintObject(nsPrintObject * aPO) { NS_ASSERTION(aPO, "Pointer is null!"); if (!aPO) return NS_ERROR_FAILURE; nsSize adjSize; PRBool documentIsTopLevel; nsIFrame* frame = nsnull; if (!aPO->IsPrintable()) return NS_OK; if (aPO->mParent && aPO->mParent->IsPrintable()) { if (aPO->mParent->mPresShell) { frame = aPO->mParent->mPresShell->FrameManager()-> GetPrimaryFrameFor(aPO->mContent, -1); } // Without a frame, this document can't be displayed; therefore, there is no // point to reflowing it if (!frame) return NS_OK; adjSize = frame->GetContentRect().Size(); documentIsTopLevel = PR_FALSE; // presshell exists because parent is printable } else { nscoord pageWidth, pageHeight; mPrt->mPrintDC->GetDeviceSurfaceDimensions(pageWidth, pageHeight); #if defined(XP_UNIX) && !defined(XP_MACOSX) // If we're in landscape mode on Linux, the device surface will have // been rotated, so for the purposes of reflowing content, we'll // treat device's height as our width and its width as our height, PRInt32 orientation; mPrt->mPrintSettings->GetOrientation(&orientation); if (nsIPrintSettings::kLandscapeOrientation == orientation) { adjSize = nsSize(pageHeight, pageWidth); } else { adjSize = nsSize(pageWidth, pageHeight); } #else adjSize = nsSize(pageWidth, pageHeight); #endif // XP_UNIX && !XP_MACOSX documentIsTopLevel = PR_TRUE; } // Here we decide whether we need scrollbars and // what the parent will be of the widget // How this logic presently works: Print Preview is always as-is (as far // as I can tell; not sure how it would work in other cases); only the root // is not eIFrame or eFrame. The child documents get a parent widget from // logic in nsFrameFrame. In any case, a child widget is created for the root // view of the document. PRBool canCreateScrollbars = PR_TRUE; nsIView* parentView = nsnull; // the top nsPrintObject's widget will always have scrollbars if (frame && frame->GetType() == nsGkAtoms::subDocumentFrame) { nsIView* view = frame->GetView(); NS_ENSURE_TRUE(view, NS_ERROR_FAILURE); view = view->GetFirstChild(); NS_ENSURE_TRUE(view, NS_ERROR_FAILURE); parentView = view; canCreateScrollbars = PR_FALSE; } // create the PresContext aPO->mPresContext = new nsRootPresContext(aPO->mDocument, mIsCreatingPrintPreview ? nsPresContext::eContext_PrintPreview: nsPresContext::eContext_Print); NS_ENSURE_TRUE(aPO->mPresContext, NS_ERROR_OUT_OF_MEMORY); aPO->mPresContext->SetPrintSettings(mPrt->mPrintSettings); // set the presentation context to the value in the print settings PRBool printBGColors; mPrt->mPrintSettings->GetPrintBGColors(&printBGColors); aPO->mPresContext->SetBackgroundColorDraw(printBGColors); mPrt->mPrintSettings->GetPrintBGImages(&printBGColors); aPO->mPresContext->SetBackgroundImageDraw(printBGColors); // init it with the DC nsresult rv = aPO->mPresContext->Init(mPrt->mPrintDC); NS_ENSURE_SUCCESS(rv, rv); aPO->mViewManager = do_CreateInstance(kViewManagerCID, &rv); NS_ENSURE_SUCCESS(rv,rv); rv = aPO->mViewManager->Init(mPrt->mPrintDC); NS_ENSURE_SUCCESS(rv,rv); nsStyleSet* styleSet; rv = mDocViewerPrint->CreateStyleSet(aPO->mDocument, &styleSet); NS_ENSURE_SUCCESS(rv, rv); rv = aPO->mDocument->CreateShell(aPO->mPresContext, aPO->mViewManager, styleSet, getter_AddRefs(aPO->mPresShell)); if (NS_FAILED(rv)) { delete styleSet; return rv; } styleSet->EndUpdate(); // The pres shell now owns the style set object. PR_PL(("In DV::ReflowPrintObject PO: %p (%9s) Setting w,h to %d,%d\n", aPO, gFrameTypesStr[aPO->mFrameType], adjSize.width, adjSize.height)); // Create a child window of the parent that is our "root view/window" nsRect tbounds = nsRect(nsPoint(0, 0), adjSize); nsIView* rootView = aPO->mViewManager->CreateView(tbounds, parentView); NS_ENSURE_TRUE(rootView, NS_ERROR_OUT_OF_MEMORY); // Only create a widget for print preview; when printing, a widget is // unnecessary and unexpected // Also, no widget should be needed except for the top-level document if (mIsCreatingPrintPreview && documentIsTopLevel) { nsNativeWidget widget = nsnull; if (!frame) widget = mParentWidget->GetNativeData(NS_NATIVE_WIDGET); rv = rootView->CreateWidget(kWidgetCID, nsnull, widget, PR_TRUE, PR_TRUE, eContentTypeContent); NS_ENSURE_SUCCESS(rv, rv); aPO->mWindow = rootView->GetWidget(); aPO->mPresContext->SetPaginatedScrolling(canCreateScrollbars); } // Setup hierarchical relationship in view manager aPO->mViewManager->SetRootView(rootView); // This docshell stuff is weird; will go away when we stop having multiple // presentations per document nsCOMPtr supps(do_QueryInterface(aPO->mDocShell)); aPO->mPresContext->SetContainer(supps); aPO->mPresShell->BeginObservingDocument(); aPO->mPresContext->SetPageSize(adjSize); aPO->mPresContext->SetIsRootPaginatedDocument(documentIsTopLevel); aPO->mPresContext->SetPageScale(aPO->mZoomRatio); // Calculate scale factor from printer to screen float printDPI = float(mPrt->mPrintDC->AppUnitsPerInch()) / float(mPrt->mPrintDC->AppUnitsPerDevPixel()); float screenDPI = float(mDeviceContext->AppUnitsPerInch()) / float(mDeviceContext->AppUnitsPerDevPixel()); aPO->mPresContext->SetPrintPreviewScale(screenDPI / printDPI); rv = aPO->mPresShell->InitialReflow(adjSize.width, adjSize.height); NS_ENSURE_SUCCESS(rv, rv); NS_ASSERTION(aPO->mPresShell, "Presshell should still be here"); // Process the reflow event InitialReflow posted aPO->mPresShell->FlushPendingNotifications(Flush_Layout); nsCOMPtr displayShell; aPO->mDocShell->GetPresShell(getter_AddRefs(displayShell)); // Transfer Selection Ranges to the new Print PresShell nsCOMPtr selection, selectionPS; // It's okay if there is no display shell, just skip copying the selection if (displayShell) { selection = displayShell->GetCurrentSelection(nsISelectionController::SELECTION_NORMAL); } selectionPS = aPO->mPresShell->GetCurrentSelection(nsISelectionController::SELECTION_NORMAL); if (selection && selectionPS) { PRInt32 cnt; selection->GetRangeCount(&cnt); PRInt32 inx; for (inx=0;inx range; if (NS_SUCCEEDED(selection->GetRangeAt(inx, getter_AddRefs(range)))) selectionPS->AddRange(range); } } // If we are trying to shrink the contents to fit on the page // we must first locate the "pageContent" frame // Then we walk the frame tree and look for the "xmost" frame // this is the frame where the right-hand side of the frame extends // the furthest if (mPrt->mShrinkToFit && documentIsTopLevel) { nsIPageSequenceFrame* pageSequence; aPO->mPresShell->GetPageSequenceFrame(&pageSequence); pageSequence->GetSTFPercent(aPO->mShrinkRatio); } #ifdef EXTENDED_DEBUG_PRINTING if (kPrintingLogMod && kPrintingLogMod->level == DUMP_LAYOUT_LEVEL) { char * docStr; char * urlStr; GetDocTitleAndURL(aPO, docStr, urlStr); char filename[256]; sprintf(filename, "print_dump_%d.txt", gDumpFileNameCnt++); // Dump all the frames and view to a a file FILE * fd = fopen(filename, "w"); if (fd) { nsIFrame *theRootFrame = aPO->mPresShell->FrameManager()->GetRootFrame(); fprintf(fd, "Title: %s\n", docStr?docStr:""); fprintf(fd, "URL: %s\n", urlStr?urlStr:""); fprintf(fd, "--------------- Frames ----------------\n"); nsCOMPtr renderingContext; mPrt->mPrintDocDC->CreateRenderingContext(*getter_AddRefs(renderingContext)); RootFrameList(aPO->mPresContext, fd, 0); //DumpFrames(fd, aPO->mPresContext, renderingContext, theRootFrame, 0); fprintf(fd, "---------------------------------------\n\n"); fprintf(fd, "--------------- Views From Root Frame----------------\n"); nsIView* v = theRootFrame->GetView(); if (v) { v->List(fd); } else { printf("View is null!\n"); } if (docShell) { fprintf(fd, "--------------- All Views ----------------\n"); DumpViews(docShell, fd); fprintf(fd, "---------------------------------------\n\n"); } fclose(fd); } if (docStr) nsMemory::Free(docStr); if (urlStr) nsMemory::Free(urlStr); } #endif return NS_OK; } //------------------------------------------------------- // Figure out how many documents and how many total pages we are printing void nsPrintEngine::CalcNumPrintablePages(PRInt32& aNumPages) { aNumPages = 0; // Count the number of printable documents // and printable pages for (PRUint32 i=0; imPrintDocList.Length(); i++) { nsPrintObject* po = mPrt->mPrintDocList.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); if (po->mPresContext && po->mPresContext->IsRootPaginatedDocument()) { nsIPageSequenceFrame* pageSequence; po->mPresShell->GetPageSequenceFrame(&pageSequence); nsIFrame * seqFrame = do_QueryFrame(pageSequence); if (seqFrame) { nsIFrame* frame = seqFrame->GetFirstChild(nsnull); while (frame) { aNumPages++; frame = frame->GetNextSibling(); } } } } } //----------------------------------------------------------------- //-- Done: Reflow Methods //----------------------------------------------------------------- //----------------------------------------------------------------- //-- Section: Printing Methods //----------------------------------------------------------------- //------------------------------------------------------- // Called for each DocShell that needs to be printed PRBool nsPrintEngine::PrintDocContent(nsPrintObject* aPO, nsresult& aStatus) { NS_ASSERTION(aPO, "Pointer is null!"); aStatus = NS_OK; if (!aPO->mHasBeenPrinted && aPO->IsPrintable()) { aStatus = DoPrint(aPO); return PR_TRUE; } // If |aPO->mPrintAsIs| and |aPO->mHasBeenPrinted| are true, // the kids frames are already processed in |PrintPage|. if (!aPO->mInvisible && !(aPO->mPrintAsIs && aPO->mHasBeenPrinted)) { for (PRUint32 i=0;imKids.Length();i++) { nsPrintObject* po = aPO->mKids[i]; PRBool printed = PrintDocContent(po, aStatus); if (printed || NS_FAILED(aStatus)) { return PR_TRUE; } } } return PR_FALSE; } //------------------------------------------------------- nsresult nsPrintEngine::DoPrint(nsPrintObject * aPO) { PR_PL(("\n")); PR_PL(("**************************** %s ****************************\n", gFrameTypesStr[aPO->mFrameType])); PR_PL(("****** In DV::DoPrint PO: %p \n", aPO)); nsIPresShell* poPresShell = aPO->mPresShell; nsPresContext* poPresContext = aPO->mPresContext; NS_ASSERTION(poPresContext, "PrintObject has not been reflowed"); NS_ASSERTION(poPresContext->Type() != nsPresContext::eContext_PrintPreview, "How did this context end up here?"); if (mPrt->mPrintProgressParams) { SetDocAndURLIntoProgress(aPO, mPrt->mPrintProgressParams); } { PRInt16 printRangeType = nsIPrintSettings::kRangeAllPages; nsresult rv; if (mPrt->mPrintSettings != nsnull) { mPrt->mPrintSettings->GetPrintRange(&printRangeType); } // Ask the page sequence frame to print all the pages nsIPageSequenceFrame* pageSequence; poPresShell->GetPageSequenceFrame(&pageSequence); NS_ASSERTION(nsnull != pageSequence, "no page sequence frame"); // We are done preparing for printing, so we can turn this off mPrt->mPreparingForPrint = PR_FALSE; // mPrt->mDebugFilePtr this is onlu non-null when compiled for debugging if (nsnull != mPrt->mDebugFilePtr) { #ifdef NS_DEBUG // output the regression test nsIFrame* root = poPresShell->FrameManager()->GetRootFrame(); nsIFrameDebug* fdbg = do_QueryFrame(root); if (fdbg) { fdbg->DumpRegressionData(poPresContext, mPrt->mDebugFilePtr, 0); } fclose(mPrt->mDebugFilePtr); SetIsPrinting(PR_FALSE); #endif } else { #ifdef EXTENDED_DEBUG_PRINTING nsIFrame* rootFrame = poPresShell->FrameManager()->GetRootFrame(); if (aPO->IsPrintable()) { char * docStr; char * urlStr; GetDocTitleAndURL(aPO, docStr, urlStr); DumpLayoutData(docStr, urlStr, poPresContext, mPrt->mPrintDocDC, rootFrame, docShell, nsnull); if (docStr) nsMemory::Free(docStr); if (urlStr) nsMemory::Free(urlStr); } #endif if (mPrt->mPrintSettings) { PRUnichar * docTitleStr = nsnull; PRUnichar * docURLStr = nsnull; GetDisplayTitleAndURL(aPO, &docTitleStr, &docURLStr, eDocTitleDefBlank); if (nsIPrintSettings::kRangeSelection == printRangeType) { poPresContext->SetIsRenderingOnlySelection(PR_TRUE); // temporarily creating rendering context // which is needed to dinf the selection frames nsCOMPtr rc; mPrt->mPrintDC->CreateRenderingContext(*getter_AddRefs(rc)); // find the starting and ending page numbers // via the selection nsIFrame* startFrame; nsIFrame* endFrame; PRInt32 startPageNum; PRInt32 endPageNum; nsRect startRect; nsRect endRect; nsCOMPtr selectionPS; selectionPS = poPresShell->GetCurrentSelection(nsISelectionController::SELECTION_NORMAL); rv = GetPageRangeForSelection(poPresShell, poPresContext, *rc, selectionPS, pageSequence, &startFrame, startPageNum, startRect, &endFrame, endPageNum, endRect); if (NS_SUCCEEDED(rv)) { mPrt->mPrintSettings->SetStartPageRange(startPageNum); mPrt->mPrintSettings->SetEndPageRange(endPageNum); nsIntMargin marginTwips(0,0,0,0); nsIntMargin unwrtMarginTwips(0,0,0,0); mPrt->mPrintSettings->GetMarginInTwips(marginTwips); mPrt->mPrintSettings->GetUnwriteableMarginInTwips(unwrtMarginTwips); nsMargin totalMargin = poPresContext->TwipsToAppUnits(marginTwips + unwrtMarginTwips); if (startPageNum == endPageNum) { { startRect.y -= totalMargin.top; endRect.y -= totalMargin.top; // Clip out selection regions above the top of the first page if (startRect.y < 0) { // Reduce height to be the height of the positive-territory // region of original rect startRect.height = PR_MAX(0, startRect.YMost()); startRect.y = 0; } if (endRect.y < 0) { // Reduce height to be the height of the positive-territory // region of original rect endRect.height = PR_MAX(0, endRect.YMost()); endRect.y = 0; } NS_ASSERTION(endRect.y >= startRect.y, "Selection end point should be after start point"); NS_ASSERTION(startRect.height >= 0, "rect should have non-negative height."); NS_ASSERTION(endRect.height >= 0, "rect should have non-negative height."); nscoord selectionHgt = endRect.y + endRect.height - startRect.y; // XXX This is temporary fix for printing more than one page of a selection pageSequence->SetSelectionHeight(startRect.y * aPO->mZoomRatio, selectionHgt * aPO->mZoomRatio); // calc total pages by getting calculating the selection's height // and then dividing it by how page content frames will fit. nscoord pageWidth, pageHeight; mPrt->mPrintDC->GetDeviceSurfaceDimensions(pageWidth, pageHeight); pageHeight -= totalMargin.top + totalMargin.bottom; PRInt32 totalPages = NSToIntCeil(float(selectionHgt) * aPO->mZoomRatio / float(pageHeight)); pageSequence->SetTotalNumPages(totalPages); } } } } nsIFrame * seqFrame = do_QueryFrame(pageSequence); if (!seqFrame) { SetIsPrinting(PR_FALSE); return NS_ERROR_FAILURE; } mPageSeqFrame = pageSequence; mPageSeqFrame->StartPrint(poPresContext, mPrt->mPrintSettings, docTitleStr, docURLStr); // Schedule Page to Print PR_PL(("Scheduling Print of PO: %p (%s) \n", aPO, gFrameTypesStr[aPO->mFrameType])); StartPagePrintTimer(aPO); } else { // not sure what to do here! SetIsPrinting(PR_FALSE); return NS_ERROR_FAILURE; } } } return NS_OK; } //--------------------------------------------------------------------- void nsPrintEngine::SetDocAndURLIntoProgress(nsPrintObject* aPO, nsIPrintProgressParams* aParams) { NS_ASSERTION(aPO, "Must have vaild nsPrintObject"); NS_ASSERTION(aParams, "Must have vaild nsIPrintProgressParams"); if (!aPO || !aPO->mDocShell || !aParams) { return; } const PRUint32 kTitleLength = 64; PRUnichar * docTitleStr; PRUnichar * docURLStr; GetDisplayTitleAndURL(aPO, &docTitleStr, &docURLStr, eDocTitleDefURLDoc); // Make sure the Titles & URLS don't get too long for the progress dialog ElipseLongString(docTitleStr, kTitleLength, PR_FALSE); ElipseLongString(docURLStr, kTitleLength, PR_TRUE); aParams->SetDocTitle(docTitleStr); aParams->SetDocURL(docURLStr); if (docTitleStr != nsnull) nsMemory::Free(docTitleStr); if (docURLStr != nsnull) nsMemory::Free(docURLStr); } //--------------------------------------------------------------------- void nsPrintEngine::ElipseLongString(PRUnichar *& aStr, const PRUint32 aLen, PRBool aDoFront) { // Make sure the URLS don't get too long for the progress dialog if (aStr && nsCRT::strlen(aStr) > aLen) { if (aDoFront) { PRUnichar * ptr = &aStr[nsCRT::strlen(aStr)-aLen+3]; nsAutoString newStr; newStr.AppendLiteral("..."); newStr += ptr; nsMemory::Free(aStr); aStr = ToNewUnicode(newStr); } else { nsAutoString newStr(aStr); newStr.SetLength(aLen-3); newStr.AppendLiteral("..."); nsMemory::Free(aStr); aStr = ToNewUnicode(newStr); } } } //------------------------------------------------------- PRBool nsPrintEngine::PrintPage(nsPrintObject* aPO, PRBool& aInRange) { NS_ASSERTION(aPO, "aPO is null!"); NS_ASSERTION(mPageSeqFrame, "mPageSeqFrame is null!"); NS_ASSERTION(mPrt, "mPrt is null!"); // Although these should NEVER be NULL // This is added insurance, to make sure we don't crash in optimized builds if (!mPrt || !aPO || !mPageSeqFrame) { ShowPrintErrorDialog(NS_ERROR_FAILURE); return PR_TRUE; // means we are done printing } PR_PL(("-----------------------------------\n")); PR_PL(("------ In DV::PrintPage PO: %p (%s)\n", aPO, gFrameTypesStr[aPO->mFrameType])); // Check setting to see if someone request it be cancelled PRBool isCancelled = PR_FALSE; mPrt->mPrintSettings->GetIsCancelled(&isCancelled); if (isCancelled) return PR_TRUE; PRInt32 pageNum, numPages, endPage; mPageSeqFrame->GetCurrentPageNum(&pageNum); mPageSeqFrame->GetNumPages(&numPages); PRBool donePrinting; PRBool isDoingPrintRange; mPageSeqFrame->IsDoingPrintRange(&isDoingPrintRange); if (isDoingPrintRange) { PRInt32 fromPage; PRInt32 toPage; mPageSeqFrame->GetPrintRange(&fromPage, &toPage); if (fromPage > numPages) { return PR_TRUE; } if (toPage > numPages) { toPage = numPages; } PR_PL(("****** Printing Page %d printing from %d to page %d\n", pageNum, fromPage, toPage)); donePrinting = pageNum >= toPage; aInRange = pageNum >= fromPage && pageNum <= toPage; endPage = (toPage - fromPage)+1; } else { PR_PL(("****** Printing Page %d of %d page(s)\n", pageNum, numPages)); donePrinting = pageNum >= numPages; endPage = numPages; aInRange = PR_TRUE; } // XXX This is wrong, but the actual behavior in the presence of a print // range sucks. if (mPrt->mPrintFrameType == nsIPrintSettings::kEachFrameSep) endPage = mPrt->mNumPrintablePages; mPrt->DoOnProgressChange(++mPrt->mNumPagesPrinted, endPage, PR_FALSE, 0); // Print the Page // if a print job was cancelled externally, an EndPage or BeginPage may // fail and the failure is passed back here. // Returning PR_TRUE means we are done printing. // // When rv == NS_ERROR_ABORT, it means we want out of the // print job without displaying any error messages nsresult rv = mPageSeqFrame->PrintNextPage(); if (NS_FAILED(rv)) { if (rv != NS_ERROR_ABORT) { ShowPrintErrorDialog(rv); mPrt->mIsAborted = PR_TRUE; } return PR_TRUE; } mPageSeqFrame->DoPageEnd(); return donePrinting; } /** --------------------------------------------------- * Find by checking frames type */ nsresult nsPrintEngine::FindSelectionBoundsWithList(nsPresContext* aPresContext, nsIRenderingContext& aRC, nsIAtom* aList, nsIFrame * aParentFrame, nsRect& aRect, nsIFrame *& aStartFrame, nsRect& aStartRect, nsIFrame *& aEndFrame, nsRect& aEndRect) { NS_ASSERTION(aPresContext, "Pointer is null!"); NS_ASSERTION(aParentFrame, "Pointer is null!"); nsIFrame* child = aParentFrame->GetFirstChild(aList); aRect += aParentFrame->GetPosition(); while (child) { // only leaf frames have this bit flipped // then check the hard way PRBool isSelected = (child->GetStateBits() & NS_FRAME_SELECTED_CONTENT) == NS_FRAME_SELECTED_CONTENT; if (isSelected) { isSelected = child->IsVisibleForPainting(); } if (isSelected) { nsRect r = child->GetRect(); if (aStartFrame == nsnull) { aStartFrame = child; aStartRect.SetRect(aRect.x + r.x, aRect.y + r.y, r.width, r.height); } else { aEndFrame = child; aEndRect.SetRect(aRect.x + r.x, aRect.y + r.y, r.width, r.height); } } FindSelectionBounds(aPresContext, aRC, child, aRect, aStartFrame, aStartRect, aEndFrame, aEndRect); child = child->GetNextSibling(); } aRect -= aParentFrame->GetPosition(); return NS_OK; } //------------------------------------------------------- // Find the Frame that is XMost nsresult nsPrintEngine::FindSelectionBounds(nsPresContext* aPresContext, nsIRenderingContext& aRC, nsIFrame * aParentFrame, nsRect& aRect, nsIFrame *& aStartFrame, nsRect& aStartRect, nsIFrame *& aEndFrame, nsRect& aEndRect) { NS_ASSERTION(aPresContext, "Pointer is null!"); NS_ASSERTION(aParentFrame, "Pointer is null!"); // loop through named child lists nsIAtom* childListName = nsnull; PRInt32 childListIndex = 0; do { nsresult rv = FindSelectionBoundsWithList(aPresContext, aRC, childListName, aParentFrame, aRect, aStartFrame, aStartRect, aEndFrame, aEndRect); NS_ENSURE_SUCCESS(rv, rv); childListName = aParentFrame->GetAdditionalChildListName(childListIndex++); } while (childListName); return NS_OK; } /** --------------------------------------------------- * This method finds the starting and ending page numbers * of the selection and also returns rect for each where * the x,y of the rect is relative to the very top of the * frame tree (absolutely positioned) */ nsresult nsPrintEngine::GetPageRangeForSelection(nsIPresShell * aPresShell, nsPresContext* aPresContext, nsIRenderingContext& aRC, nsISelection* aSelection, nsIPageSequenceFrame* aPageSeqFrame, nsIFrame** aStartFrame, PRInt32& aStartPageNum, nsRect& aStartRect, nsIFrame** aEndFrame, PRInt32& aEndPageNum, nsRect& aEndRect) { NS_ASSERTION(aPresShell, "Pointer is null!"); NS_ASSERTION(aPresContext, "Pointer is null!"); NS_ASSERTION(aSelection, "Pointer is null!"); NS_ASSERTION(aPageSeqFrame, "Pointer is null!"); NS_ASSERTION(aStartFrame, "Pointer is null!"); NS_ASSERTION(aEndFrame, "Pointer is null!"); nsIFrame * seqFrame = do_QueryFrame(aPageSeqFrame); if (!seqFrame) { return NS_ERROR_FAILURE; } nsIFrame * startFrame = nsnull; nsIFrame * endFrame = nsnull; // start out with the sequence frame and search the entire frame tree // capturing the starting and ending child frames of the selection // and their rects nsRect r = seqFrame->GetRect(); FindSelectionBounds(aPresContext, aRC, seqFrame, r, startFrame, aStartRect, endFrame, aEndRect); #ifdef DEBUG_rodsX printf("Start Frame: %p\n", startFrame); printf("End Frame: %p\n", endFrame); #endif // initial the page numbers here // in case we don't find and frames aStartPageNum = -1; aEndPageNum = -1; nsIFrame * startPageFrame; nsIFrame * endPageFrame; // check to make sure we found a starting frame if (startFrame != nsnull) { // Now search up the tree to find what page the // start/ending selections frames are on // // Check to see if start should be same as end if // the end frame comes back null if (endFrame == nsnull) { // XXX the "GetPageFrame" step could be integrated into // the FindSelectionBounds step, but walking up to find // the parent of a child frame isn't expensive and it makes // FindSelectionBounds a little easier to understand startPageFrame = nsLayoutUtils::GetPageFrame(startFrame); endPageFrame = startPageFrame; aEndRect = aStartRect; } else { startPageFrame = nsLayoutUtils::GetPageFrame(startFrame); endPageFrame = nsLayoutUtils::GetPageFrame(endFrame); } } else { return NS_ERROR_FAILURE; } #ifdef DEBUG_rodsX printf("Start Page: %p\n", startPageFrame); printf("End Page: %p\n", endPageFrame); // dump all the pages and their pointers { PRInt32 pageNum = 1; nsIFrame* child = seqFrame->GetFirstChild(nsnull); while (child != nsnull) { printf("Page: %d - %p\n", pageNum, child); pageNum++; child = child->GetNextSibling(); } } #endif // Now that we have the page frames // find out what the page numbers are for each frame PRInt32 pageNum = 1; nsIFrame* page = seqFrame->GetFirstChild(nsnull); while (page != nsnull) { if (page == startPageFrame) { aStartPageNum = pageNum; } if (page == endPageFrame) { aEndPageNum = pageNum; } pageNum++; page = page->GetNextSibling(); } #ifdef DEBUG_rodsX printf("Start Page No: %d\n", aStartPageNum); printf("End Page No: %d\n", aEndPageNum); #endif *aStartFrame = startPageFrame; *aEndFrame = endPageFrame; return NS_OK; } //----------------------------------------------------------------- //-- Done: Printing Methods //----------------------------------------------------------------- //----------------------------------------------------------------- //-- Section: Misc Support Methods //----------------------------------------------------------------- //--------------------------------------------------------------------- void nsPrintEngine::SetIsPrinting(PRBool aIsPrinting) { mIsDoingPrinting = aIsPrinting; // Calling SetIsPrinting while in print preview confuses the document viewer // This is safe because we prevent exiting print preview while printing if (mDocViewerPrint && !mIsDoingPrintPreview) { mDocViewerPrint->SetIsPrinting(aIsPrinting); } if (mPrt && aIsPrinting) { mPrt->mPreparingForPrint = PR_TRUE; } } //--------------------------------------------------------------------- void nsPrintEngine::SetIsPrintPreview(PRBool aIsPrintPreview) { mIsDoingPrintPreview = aIsPrintPreview; if (mDocViewerPrint) { mDocViewerPrint->SetIsPrintPreview(aIsPrintPreview); } } //--------------------------------------------------------------------- void nsPrintEngine::CleanupDocTitleArray(PRUnichar**& aArray, PRInt32& aCount) { for (PRInt32 i = aCount - 1; i >= 0; i--) { nsMemory::Free(aArray[i]); } nsMemory::Free(aArray); aArray = NULL; aCount = 0; } //--------------------------------------------------------------------- // static PRBool nsPrintEngine::HasFramesetChild(nsIContent* aContent) { if (!aContent) { return PR_FALSE; } PRUint32 numChildren = aContent->GetChildCount(); // do a breadth search across all siblings for (PRUint32 i = 0; i < numChildren; ++i) { nsIContent *child = aContent->GetChildAt(i); if (child->Tag() == nsGkAtoms::frameset && child->IsNodeOfType(nsINode::eHTML)) { return PR_TRUE; } } return PR_FALSE; } /** --------------------------------------------------- * Get the Focused Frame for a documentviewer */ already_AddRefed nsPrintEngine::FindFocusedDOMWindow() { nsIFocusManager* fm = nsFocusManager::GetFocusManager(); if (fm) { nsCOMPtr domWin; fm->GetFocusedWindow(getter_AddRefs(domWin)); if (domWin && IsWindowsInOurSubTree(domWin)) return domWin.forget(); } return nsnull; } //--------------------------------------------------------------------- PRBool nsPrintEngine::IsWindowsInOurSubTree(nsIDOMWindow * aDOMWindow) { PRBool found = PR_FALSE; // now check to make sure it is in "our" tree of docshells nsCOMPtr window(do_QueryInterface(aDOMWindow)); if (window) { nsCOMPtr docShellAsItem = do_QueryInterface(window->GetDocShell()); if (docShellAsItem) { // get this DocViewer docshell nsCOMPtr thisDVDocShell(do_QueryInterface(mContainer)); while (!found) { nsCOMPtr parentDocshell(do_QueryInterface(docShellAsItem)); if (parentDocshell) { if (parentDocshell == thisDVDocShell) { found = PR_TRUE; break; } } else { break; // at top of tree } nsCOMPtr docShellParent; docShellAsItem->GetSameTypeParent(getter_AddRefs(docShellParent)); docShellAsItem = docShellParent; } // while } } // scriptobj return found; } //------------------------------------------------------- PRBool nsPrintEngine::DonePrintingPages(nsPrintObject* aPO, nsresult aResult) { //NS_ASSERTION(aPO, "Pointer is null!"); PR_PL(("****** In DV::DonePrintingPages PO: %p (%s)\n", aPO, aPO?gFrameTypesStr[aPO->mFrameType]:"")); if (aPO != nsnull) { aPO->mHasBeenPrinted = PR_TRUE; nsresult rv; PRBool didPrint = PrintDocContent(mPrt->mPrintObject, rv); if (NS_SUCCEEDED(rv) && didPrint) { PR_PL(("****** In DV::DonePrintingPages PO: %p (%s) didPrint:%s (Not Done Printing)\n", aPO, gFrameTypesStr[aPO->mFrameType], PRT_YESNO(didPrint))); return PR_FALSE; } } if (NS_SUCCEEDED(aResult)) { FirePrintCompletionEvent(); } TurnScriptingOn(PR_TRUE); SetIsPrinting(PR_FALSE); // Release reference to mPagePrintTimer; the timer object destroys itself // after this returns true NS_IF_RELEASE(mPagePrintTimer); return PR_TRUE; } //------------------------------------------------------- // Recursively sets the PO items to be printed "As Is" // from the given item down into the tree void nsPrintEngine::SetPrintAsIs(nsPrintObject* aPO, PRBool aAsIs) { NS_ASSERTION(aPO, "Pointer is null!"); aPO->mPrintAsIs = aAsIs; for (PRUint32 i=0;imKids.Length();i++) { SetPrintAsIs(aPO->mKids[i], aAsIs); } } //------------------------------------------------------- // Given a DOMWindow it recursively finds the PO object that matches nsPrintObject* nsPrintEngine::FindPrintObjectByDOMWin(nsPrintObject* aPO, nsIDOMWindow* aDOMWin) { NS_ASSERTION(aPO, "Pointer is null!"); // Often the CurFocused DOMWindow is passed in // andit is valid for it to be null, so short circut if (!aDOMWin) { return nsnull; } nsCOMPtr domWin(do_GetInterface(aPO->mDocShell)); if (domWin && domWin == aDOMWin) { return aPO; } PRInt32 cnt = aPO->mKids.Length(); for (PRInt32 i = 0; i < cnt; ++i) { nsPrintObject* po = FindPrintObjectByDOMWin(aPO->mKids[i], aDOMWin); if (po) { return po; } } return nsnull; } //------------------------------------------------------- nsresult nsPrintEngine::EnablePOsForPrinting() { // NOTE: All POs have been "turned off" for printing // this is where we decided which POs get printed. mPrt->mSelectedPO = nsnull; if (mPrt->mPrintSettings == nsnull) { return NS_ERROR_FAILURE; } mPrt->mPrintFrameType = nsIPrintSettings::kNoFrames; mPrt->mPrintSettings->GetPrintFrameType(&mPrt->mPrintFrameType); PRInt16 printHowEnable = nsIPrintSettings::kFrameEnableNone; mPrt->mPrintSettings->GetHowToEnableFrameUI(&printHowEnable); PRInt16 printRangeType = nsIPrintSettings::kRangeAllPages; mPrt->mPrintSettings->GetPrintRange(&printRangeType); PR_PL(("\n")); PR_PL(("********* nsPrintEngine::EnablePOsForPrinting *********\n")); PR_PL(("PrintFrameType: %s \n", gPrintFrameTypeStr[mPrt->mPrintFrameType])); PR_PL(("HowToEnableFrameUI: %s \n", gFrameHowToEnableStr[printHowEnable])); PR_PL(("PrintRange: %s \n", gPrintRangeStr[printRangeType])); PR_PL(("----\n")); // ***** This is the ultimate override ***** // if we are printing the selection (either an IFrame or selection range) // then set the mPrintFrameType as if it were the selected frame if (printRangeType == nsIPrintSettings::kRangeSelection) { mPrt->mPrintFrameType = nsIPrintSettings::kSelectedFrame; printHowEnable = nsIPrintSettings::kFrameEnableNone; } // This tells us that the "Frame" UI has turned off, // so therefore there are no FrameSets/Frames/IFrames to be printed // // This means there are not FrameSets, // but the document could contain an IFrame if (printHowEnable == nsIPrintSettings::kFrameEnableNone) { // Print all the pages or a sub range of pages if (printRangeType == nsIPrintSettings::kRangeAllPages || printRangeType == nsIPrintSettings::kRangeSpecifiedPageRange) { SetPrintPO(mPrt->mPrintObject, PR_TRUE); // Set the children so they are PrinAsIs // In this case, the children are probably IFrames if (mPrt->mPrintObject->mKids.Length() > 0) { for (PRUint32 i=0;imPrintObject->mKids.Length();i++) { nsPrintObject* po = mPrt->mPrintObject->mKids[i]; NS_ASSERTION(po, "nsPrintObject can't be null!"); SetPrintAsIs(po); } // ***** Another override ***** mPrt->mPrintFrameType = nsIPrintSettings::kFramesAsIs; } PR_PL(("PrintFrameType: %s \n", gPrintFrameTypeStr[mPrt->mPrintFrameType])); PR_PL(("HowToEnableFrameUI: %s \n", gFrameHowToEnableStr[printHowEnable])); PR_PL(("PrintRange: %s \n", gPrintRangeStr[printRangeType])); return NS_OK; } // This means we are either printed a selected IFrame or // we are printing the current selection if (printRangeType == nsIPrintSettings::kRangeSelection) { // If the currentFocusDOMWin can'r be null if something is selected if (mPrt->mCurrentFocusWin) { // Find the selected IFrame nsPrintObject * po = FindPrintObjectByDOMWin(mPrt->mPrintObject, mPrt->mCurrentFocusWin); if (po != nsnull) { mPrt->mSelectedPO = po; // Makes sure all of its children are be printed "AsIs" SetPrintAsIs(po); // Now, only enable this POs (the selected PO) and all of its children SetPrintPO(po, PR_TRUE); // check to see if we have a range selection, // as oppose to a insert selection // this means if the user just clicked on the IFrame then // there will not be a selection so we want the entire page to print // // XXX this is sort of a hack right here to make the page // not try to reposition itself when printing selection nsCOMPtr domWin = do_GetInterface(po->mDocShell); if (!IsThereARangeSelection(domWin)) { printRangeType = nsIPrintSettings::kRangeAllPages; mPrt->mPrintSettings->SetPrintRange(printRangeType); } PR_PL(("PrintFrameType: %s \n", gPrintFrameTypeStr[mPrt->mPrintFrameType])); PR_PL(("HowToEnableFrameUI: %s \n", gFrameHowToEnableStr[printHowEnable])); PR_PL(("PrintRange: %s \n", gPrintRangeStr[printRangeType])); return NS_OK; } } else { for (PRUint32 i=0;imPrintDocList.Length();i++) { nsPrintObject* po = mPrt->mPrintDocList.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); nsCOMPtr domWin = do_GetInterface(po->mDocShell); if (IsThereARangeSelection(domWin)) { mPrt->mCurrentFocusWin = domWin; SetPrintPO(po, PR_TRUE); break; } } return NS_OK; } } } // check to see if there is a selection when a FrameSet is present if (printRangeType == nsIPrintSettings::kRangeSelection) { // If the currentFocusDOMWin can'r be null if something is selected if (mPrt->mCurrentFocusWin) { // Find the selected IFrame nsPrintObject * po = FindPrintObjectByDOMWin(mPrt->mPrintObject, mPrt->mCurrentFocusWin); if (po != nsnull) { mPrt->mSelectedPO = po; // Makes sure all of its children are be printed "AsIs" SetPrintAsIs(po); // Now, only enable this POs (the selected PO) and all of its children SetPrintPO(po, PR_TRUE); // check to see if we have a range selection, // as oppose to a insert selection // this means if the user just clicked on the IFrame then // there will not be a selection so we want the entire page to print // // XXX this is sort of a hack right here to make the page // not try to reposition itself when printing selection nsCOMPtr domWin = do_GetInterface(po->mDocShell); if (!IsThereARangeSelection(domWin)) { printRangeType = nsIPrintSettings::kRangeAllPages; mPrt->mPrintSettings->SetPrintRange(printRangeType); } PR_PL(("PrintFrameType: %s \n", gPrintFrameTypeStr[mPrt->mPrintFrameType])); PR_PL(("HowToEnableFrameUI: %s \n", gFrameHowToEnableStr[printHowEnable])); PR_PL(("PrintRange: %s \n", gPrintRangeStr[printRangeType])); return NS_OK; } } } // If we are printing "AsIs" then sets all the POs to be printed as is if (mPrt->mPrintFrameType == nsIPrintSettings::kFramesAsIs) { SetPrintAsIs(mPrt->mPrintObject); SetPrintPO(mPrt->mPrintObject, PR_TRUE); return NS_OK; } // If we are printing the selected Frame then // find that PO for that selected DOMWin and set it all of its // children to be printed if (mPrt->mPrintFrameType == nsIPrintSettings::kSelectedFrame) { if ((mPrt->mIsParentAFrameSet && mPrt->mCurrentFocusWin) || mPrt->mIsIFrameSelected) { nsPrintObject * po = FindPrintObjectByDOMWin(mPrt->mPrintObject, mPrt->mCurrentFocusWin); if (po != nsnull) { mPrt->mSelectedPO = po; // NOTE: Calling this sets the "po" and // we don't want to do this for documents that have no children, // because then the "DoEndPage" gets called and it shouldn't if (po->mKids.Length() > 0) { // Makes sure that itself, and all of its children are printed "AsIs" SetPrintAsIs(po); } // Now, only enable this POs (the selected PO) and all of its children SetPrintPO(po, PR_TRUE); } } return NS_OK; } // If we are print each subdoc separately, // then don't print any of the FraneSet Docs if (mPrt->mPrintFrameType == nsIPrintSettings::kEachFrameSep) { SetPrintPO(mPrt->mPrintObject, PR_TRUE); PRInt32 cnt = mPrt->mPrintDocList.Length(); for (PRInt32 i=0;imPrintDocList.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); if (po->mFrameType == eFrameSet) { po->mDontPrint = PR_TRUE; } } } return NS_OK; } //------------------------------------------------------- // Return the nsPrintObject with that is XMost (The widest frameset frame) AND // contains the XMost (widest) layout frame nsPrintObject* nsPrintEngine::FindSmallestSTF() { float smallestRatio = 1.0f; nsPrintObject* smallestPO = nsnull; for (PRUint32 i=0;imPrintDocList.Length();i++) { nsPrintObject* po = mPrt->mPrintDocList.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); if (po->mFrameType != eFrameSet && po->mFrameType != eIFrame) { if (po->mShrinkRatio < smallestRatio) { smallestRatio = po->mShrinkRatio; smallestPO = po; } } } #ifdef EXTENDED_DEBUG_PRINTING if (smallestPO) printf("*PO: %p Type: %d %10.3f\n", smallestPO, smallestPO->mFrameType, smallestPO->mShrinkRatio); #endif return smallestPO; } //------------------------------------------------------- void nsPrintEngine::TurnScriptingOn(PRBool aDoTurnOn) { if (mIsDoingPrinting && aDoTurnOn && mDocViewerPrint && mDocViewerPrint->GetIsPrintPreview()) { // We don't want to turn scripting on if print preview is shown still after // printing. return; } nsPrintData* prt = mPrt; #ifdef NS_PRINT_PREVIEW if (!prt) { prt = mPrtPreview; } #endif if (!prt) { return; } NS_ASSERTION(mDocument, "We MUST have a document."); // First, get the script global object from the document... for (PRUint32 i=0;imPrintDocList.Length();i++) { nsPrintObject* po = prt->mPrintDocList.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); nsIDocument* doc = po->mDocument; if (!doc) { continue; } // get the script global object nsIScriptGlobalObject *scriptGlobalObj = doc->GetScriptGlobalObject(); if (scriptGlobalObj) { nsCOMPtr window = do_QueryInterface(scriptGlobalObj); NS_ASSERTION(window, "Can't get nsPIDOMWindow"); nsIScriptContext *scx = scriptGlobalObj->GetContext(); NS_WARN_IF_FALSE(scx, "Can't get nsIScriptContext"); nsresult propThere = NS_PROPTABLE_PROP_NOT_THERE; doc->GetProperty(nsGkAtoms::scriptEnabledBeforePrintOrPreview, &propThere); if (aDoTurnOn) { if (propThere != NS_PROPTABLE_PROP_NOT_THERE) { doc->DeleteProperty(nsGkAtoms::scriptEnabledBeforePrintOrPreview); if (scx) { scx->SetScriptsEnabled(PR_TRUE, PR_FALSE); } window->ResumeTimeouts(PR_FALSE); } } else { // Have to be careful, because people call us over and over again with // aDoTurnOn == PR_FALSE. So don't set the property if it's already // set, since in that case we'd set it to the wrong value. if (propThere == NS_PROPTABLE_PROP_NOT_THERE) { // Stash the current value of IsScriptEnabled on the document, so // that layout code running in print preview doesn't get confused. doc->SetProperty(nsGkAtoms::scriptEnabledBeforePrintOrPreview, NS_INT32_TO_PTR(doc->IsScriptEnabled())); if (scx) { scx->SetScriptsEnabled(PR_FALSE, PR_FALSE); } window->SuspendTimeouts(1, PR_FALSE); } } } } } //----------------------------------------------------------------- //-- Done: Misc Support Methods //----------------------------------------------------------------- //----------------------------------------------------------------- //-- Section: Finishing up or Cleaning up //----------------------------------------------------------------- //----------------------------------------------------------------- void nsPrintEngine::CloseProgressDialog(nsIWebProgressListener* aWebProgressListener) { if (aWebProgressListener) { aWebProgressListener->OnStateChange(nsnull, nsnull, nsIWebProgressListener::STATE_STOP|nsIWebProgressListener::STATE_IS_DOCUMENT, nsnull); } } //----------------------------------------------------------------- nsresult nsPrintEngine::FinishPrintPreview() { nsresult rv = NS_OK; #ifdef NS_PRINT_PREVIEW if (!mPrt) { /* we're already finished with print preview */ return rv; } rv = DocumentReadyForPrinting(); SetIsCreatingPrintPreview(PR_FALSE); /* cleaup on failure + notify user */ if (NS_FAILED(rv)) { /* cleanup done, let's fire-up an error dialog to notify the user * what went wrong... */ mPrt->OnEndPrinting(); TurnScriptingOn(PR_TRUE); return rv; } // At this point we are done preparing everything // before it is to be created if (mIsDoingPrintPreview && mOldPrtPreview) { delete mOldPrtPreview; mOldPrtPreview = nsnull; } InstallPrintPreviewListener(); mPrt->OnEndPrinting(); // PrintPreview was built using the mPrt (code reuse) // then we assign it over mPrtPreview = mPrt; mPrt = nsnull; #endif // NS_PRINT_PREVIEW return NS_OK; } //----------------------------------------------------------------- //-- Done: Finishing up or Cleaning up //----------------------------------------------------------------- /*=============== Timer Related Code ======================*/ nsresult nsPrintEngine::StartPagePrintTimer(nsPrintObject* aPO) { if (!mPagePrintTimer) { nsresult rv = NS_NewPagePrintTimer(&mPagePrintTimer); NS_ENSURE_SUCCESS(rv, rv); // Get the delay time in between the printing of each page // this gives the user more time to press cancel PRInt32 printPageDelay = 500; mPrt->mPrintSettings->GetPrintPageDelay(&printPageDelay); mPagePrintTimer->Init(this, mDocViewerPrint, printPageDelay); } return mPagePrintTimer->Start(aPO); } /*=============== nsIObserver Interface ======================*/ NS_IMETHODIMP nsPrintEngine::Observe(nsISupports *aSubject, const char *aTopic, const PRUnichar *aData) { nsresult rv = NS_ERROR_FAILURE; if (mIsDoingPrinting) { rv = DocumentReadyForPrinting(); /* cleaup on failure + notify user */ if (NS_FAILED(rv)) { CleanupOnFailure(rv, PR_TRUE); } } else { rv = FinishPrintPreview(); if (NS_FAILED(rv)) { CleanupOnFailure(rv, PR_FALSE); } if (mPrtPreview) { mPrtPreview->OnEndPrinting(); } rv = NS_OK; } return rv; } //--------------------------------------------------------------- //-- PLEvent Notification //--------------------------------------------------------------- class nsPrintCompletionEvent : public nsRunnable { public: nsPrintCompletionEvent(nsIDocumentViewerPrint *docViewerPrint) : mDocViewerPrint(docViewerPrint) { NS_ASSERTION(mDocViewerPrint, "mDocViewerPrint is null."); } NS_IMETHOD Run() { if (mDocViewerPrint) mDocViewerPrint->OnDonePrinting(); return NS_OK; } private: nsCOMPtr mDocViewerPrint; }; //----------------------------------------------------------- void nsPrintEngine::FirePrintCompletionEvent() { nsCOMPtr event = new nsPrintCompletionEvent(mDocViewerPrint); if (NS_FAILED(NS_DispatchToCurrentThread(event))) NS_WARNING("failed to dispatch print completion event"); } //--------------------------------------------------------------- //--------------------------------------------------------------- //-- Debug helper routines //--------------------------------------------------------------- //--------------------------------------------------------------- #if (defined(XP_WIN) || defined(XP_OS2)) && defined(EXTENDED_DEBUG_PRINTING) #include "windows.h" #include "process.h" #include "direct.h" #define MY_FINDFIRST(a,b) FindFirstFile(a,b) #define MY_FINDNEXT(a,b) FindNextFile(a,b) #define ISDIR(a) (a.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY) #define MY_FINDCLOSE(a) FindClose(a) #define MY_FILENAME(a) a.cFileName #define MY_FILESIZE(a) (a.nFileSizeHigh * MAXDWORD) + a.nFileSizeLow int RemoveFilesInDir(const char * aDir) { WIN32_FIND_DATA data_ptr; HANDLE find_handle; char path[MAX_PATH]; strcpy(path, aDir); // Append slash to the end of the directory names if not there if (path[strlen(path)-1] != '\\') strcat(path, "\\"); char findPath[MAX_PATH]; strcpy(findPath, path); strcat(findPath, "*.*"); find_handle = MY_FINDFIRST(findPath, &data_ptr); if (find_handle != INVALID_HANDLE_VALUE) { do { if (ISDIR(data_ptr) && (stricmp(MY_FILENAME(data_ptr),".")) && (stricmp(MY_FILENAME(data_ptr),".."))) { // skip } else if (!ISDIR(data_ptr)) { if (!strncmp(MY_FILENAME(data_ptr), "print_dump", 10)) { char fileName[MAX_PATH]; strcpy(fileName, aDir); strcat(fileName, "\\"); strcat(fileName, MY_FILENAME(data_ptr)); printf("Removing %s\n", fileName); remove(fileName); } } } while(MY_FINDNEXT(find_handle,&data_ptr)); MY_FINDCLOSE(find_handle); } return TRUE; } #endif #ifdef EXTENDED_DEBUG_PRINTING /** --------------------------------------------------- * Dumps Frames for Printing */ static void RootFrameList(nsPresContext* aPresContext, FILE* out, PRInt32 aIndent) { if (!aPresContext || !out) return; nsIPresShell *shell = aPresContext->GetPresShell(); if (shell) { nsIFrame* frame = shell->FrameManager()->GetRootFrame(); if (frame) { nsIFrameDebug* debugFrame = do_QueryFrame(frame); if (debugFrame) debugFrame->List(aPresContext, out, aIndent); } } } /** --------------------------------------------------- * Dumps Frames for Printing */ static void DumpFrames(FILE* out, nsPresContext* aPresContext, nsIRenderingContext * aRendContext, nsIFrame * aFrame, PRInt32 aLevel) { NS_ASSERTION(out, "Pointer is null!"); NS_ASSERTION(aPresContext, "Pointer is null!"); NS_ASSERTION(aRendContext, "Pointer is null!"); NS_ASSERTION(aFrame, "Pointer is null!"); nsIFrame* child = aFrame->GetFirstChild(nsnull); while (child != nsnull) { for (PRInt32 i=0;iGetFrameName(tmp); } fputs(NS_LossyConvertUTF16toASCII(tmp).get(), out); PRBool isSelected; if (NS_SUCCEEDED(child->IsVisibleForPainting(aPresContext, *aRendContext, PR_TRUE, &isSelected))) { fprintf(out, " %p %s", child, isSelected?"VIS":"UVS"); nsRect rect = child->GetRect(); fprintf(out, "[%d,%d,%d,%d] ", rect.x, rect.y, rect.width, rect.height); fprintf(out, "v: %p ", (void*)child->GetView()); fprintf(out, "\n"); DumpFrames(out, aPresContext, aRendContext, child, aLevel+1); child = child->GetNextSibling(); } } } /** --------------------------------------------------- * Dumps the Views from the DocShell */ static void DumpViews(nsIDocShell* aDocShell, FILE* out) { NS_ASSERTION(aDocShell, "Pointer is null!"); NS_ASSERTION(out, "Pointer is null!"); if (nsnull != aDocShell) { fprintf(out, "docshell=%p \n", aDocShell); nsIPresShell* shell = nsPrintEngine::GetPresShellFor(aDocShell); if (shell) { nsIViewManager* vm = shell->GetViewManager(); if (vm) { nsIView* root; vm->GetRootView(root); if (nsnull != root) { root->List(out); } } } else { fputs("null pres shell\n", out); } // dump the views of the sub documents PRInt32 i, n; nsCOMPtr docShellAsNode(do_QueryInterface(aDocShell)); docShellAsNode->GetChildCount(&n); for (i = 0; i < n; i++) { nsCOMPtr child; docShellAsNode->GetChildAt(i, getter_AddRefs(child)); nsCOMPtr childAsShell(do_QueryInterface(child)); if (childAsShell) { DumpViews(childAsShell, out); } } } } /** --------------------------------------------------- * Dumps the Views and Frames */ void DumpLayoutData(char* aTitleStr, char* aURLStr, nsPresContext* aPresContext, nsIDeviceContext * aDC, nsIFrame * aRootFrame, nsIDocShekk * aDocShell, FILE* aFD = nsnull) { if (!kPrintingLogMod || kPrintingLogMod->level != DUMP_LAYOUT_LEVEL) return; if (aPresContext == nsnull || aDC == nsnull) { return; } #ifdef NS_PRINT_PREVIEW if (aPresContext->Type() == nsPresContext::eContext_PrintPreview) { return; } #endif NS_ASSERTION(aRootFrame, "Pointer is null!"); NS_ASSERTION(aDocShell, "Pointer is null!"); // Dump all the frames and view to a a file char filename[256]; sprintf(filename, "print_dump_layout_%d.txt", gDumpLOFileNameCnt++); FILE * fd = aFD?aFD:fopen(filename, "w"); if (fd) { fprintf(fd, "Title: %s\n", aTitleStr?aTitleStr:""); fprintf(fd, "URL: %s\n", aURLStr?aURLStr:""); fprintf(fd, "--------------- Frames ----------------\n"); fprintf(fd, "--------------- Frames ----------------\n"); nsCOMPtr renderingContext; aDC->CreateRenderingContext(*getter_AddRefs(renderingContext)); RootFrameList(aPresContext, fd, 0); //DumpFrames(fd, aPresContext, renderingContext, aRootFrame, 0); fprintf(fd, "---------------------------------------\n\n"); fprintf(fd, "--------------- Views From Root Frame----------------\n"); nsIView* v = aRootFrame->GetView(); if (v) { v->List(fd); } else { printf("View is null!\n"); } if (aDocShell) { fprintf(fd, "--------------- All Views ----------------\n"); DumpViews(aDocShell, fd); fprintf(fd, "---------------------------------------\n\n"); } if (aFD == nsnull) { fclose(fd); } } } //------------------------------------------------------------- static void DumpPrintObjectsList(nsTArray * aDocList) { if (!kPrintingLogMod || kPrintingLogMod->level != DUMP_LAYOUT_LEVEL) return; NS_ASSERTION(aDocList, "Pointer is null!"); const char types[][3] = {"DC", "FR", "IF", "FS"}; PR_PL(("Doc List\n***************************************************\n")); PR_PL(("T P A H PO DocShell Seq Page Root Page# Rect\n")); PRInt32 cnt = aDocList->Length(); for (PRInt32 i=0;iElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); nsIFrame* rootFrame = nsnull; if (po->mPresShell) { rootFrame = po->mPresShell->FrameManager()->GetRootFrame(); while (rootFrame != nsnull) { nsIPageSequenceFrame * sqf = do_QueryFrame(rootFrame); if (sqf) { break; } rootFrame = rootFrame->GetFirstChild(nsnull); } } PR_PL(("%s %d %d %d %p %p %p %p %p %d %d,%d,%d,%d\n", types[po->mFrameType], po->IsPrintable(), po->mPrintAsIs, po->mHasBeenPrinted, po, po->mDocShell.get(), po->mSeqFrame, po->mPageFrame, rootFrame, po->mPageNum, po->mRect.x, po->mRect.y, po->mRect.width, po->mRect.height)); } } //------------------------------------------------------------- static void DumpPrintObjectsTree(nsPrintObject * aPO, int aLevel, FILE* aFD) { if (!kPrintingLogMod || kPrintingLogMod->level != DUMP_LAYOUT_LEVEL) return; NS_ASSERTION(aPO, "Pointer is null!"); FILE * fd = aFD?aFD:stdout; const char types[][3] = {"DC", "FR", "IF", "FS"}; if (aLevel == 0) { fprintf(fd, "DocTree\n***************************************************\n"); fprintf(fd, "T PO DocShell Seq Page Page# Rect\n"); } PRInt32 cnt = aPO->mKids.Length(); for (PRInt32 i=0;imKids.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); for (PRInt32 k=0;kmFrameType], po, po->mDocShell.get(), po->mSeqFrame, po->mPageFrame, po->mPageNum, po->mRect.x, po->mRect.y, po->mRect.width, po->mRect.height); } } //------------------------------------------------------------- static void GetDocTitleAndURL(nsPrintObject* aPO, char *& aDocStr, char *& aURLStr) { aDocStr = nsnull; aURLStr = nsnull; PRUnichar * docTitleStr; PRUnichar * docURLStr; nsPrintEngine::GetDisplayTitleAndURL(aPO, &docTitleStr, &docURLStr, nsPrintEngine::eDocTitleDefURLDoc); if (docTitleStr) { nsAutoString strDocTitle(docTitleStr); aDocStr = ToNewCString(strDocTitle); nsMemory::Free(docTitleStr); } if (docURLStr) { nsAutoString strURL(docURLStr); aURLStr = ToNewCString(strURL); nsMemory::Free(docURLStr); } } //------------------------------------------------------------- static void DumpPrintObjectsTreeLayout(nsPrintObject * aPO, nsIDeviceContext * aDC, int aLevel, FILE * aFD) { if (!kPrintingLogMod || kPrintingLogMod->level != DUMP_LAYOUT_LEVEL) return; NS_ASSERTION(aPO, "Pointer is null!"); NS_ASSERTION(aDC, "Pointer is null!"); const char types[][3] = {"DC", "FR", "IF", "FS"}; FILE * fd = nsnull; if (aLevel == 0) { fd = fopen("tree_layout.txt", "w"); fprintf(fd, "DocTree\n***************************************************\n"); fprintf(fd, "***************************************************\n"); fprintf(fd, "T PO DocShell Seq Page Page# Rect\n"); } else { fd = aFD; } if (fd) { nsIFrame* rootFrame = nsnull; if (aPO->mPresShell) { rootFrame = aPO->mPresShell->FrameManager()->GetRootFrame(); } for (PRInt32 k=0;kmFrameType], aPO, aPO->mDocShell.get(), aPO->mSeqFrame, aPO->mPageFrame, aPO->mPageNum, aPO->mRect.x, aPO->mRect.y, aPO->mRect.width, aPO->mRect.height); if (aPO->IsPrintable()) { char * docStr; char * urlStr; GetDocTitleAndURL(aPO, docStr, urlStr); DumpLayoutData(docStr, urlStr, aPO->mPresContext, aDC, rootFrame, aPO->mDocShell, fd); if (docStr) nsMemory::Free(docStr); if (urlStr) nsMemory::Free(urlStr); } fprintf(fd, "<***************************************************>\n"); PRInt32 cnt = aPO->mKids.Length(); for (PRInt32 i=0;imKids.ElementAt(i); NS_ASSERTION(po, "nsPrintObject can't be null!"); DumpPrintObjectsTreeLayout(po, aDC, aLevel+1, fd); } } if (aLevel == 0 && fd) { fclose(fd); } } //------------------------------------------------------------- static void DumpPrintObjectsListStart(const char * aStr, nsTArray * aDocList) { if (!kPrintingLogMod || kPrintingLogMod->level != DUMP_LAYOUT_LEVEL) return; NS_ASSERTION(aStr, "Pointer is null!"); NS_ASSERTION(aDocList, "Pointer is null!"); PR_PL(("%s\n", aStr)); DumpPrintObjectsList(aDocList); } #define DUMP_DOC_LIST(_title) DumpPrintObjectsListStart((_title), mPrt->mPrintDocList); #define DUMP_DOC_TREE DumpPrintObjectsTree(mPrt->mPrintObject); #define DUMP_DOC_TREELAYOUT DumpPrintObjectsTreeLayout(mPrt->mPrintObject, mPrt->mPrintDC); #else #define DUMP_DOC_LIST(_title) #define DUMP_DOC_TREE #define DUMP_DOC_TREELAYOUT #endif //--------------------------------------------------------------- //--------------------------------------------------------------- //-- End of debug helper routines //---------------------------------------------------------------