/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is the Mozilla SMIL module. * * The Initial Developer of the Original Code is Brian Birtles. * Portions created by the Initial Developer are Copyright (C) 2005 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Brian Birtles * Daniel Holbert * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #ifndef NS_SMILANIMATIONFUNCTION_H_ #define NS_SMILANIMATIONFUNCTION_H_ #include "nsISMILAttr.h" #include "nsGkAtoms.h" #include "nsString.h" #include "nsSMILTargetIdentifier.h" #include "nsSMILTimeValue.h" #include "nsSMILKeySpline.h" #include "nsSMILValue.h" #include "nsAutoPtr.h" #include "nsTArray.h" #include "nsAttrValue.h" #include "nsSMILTypes.h" class nsISMILAnimationElement; //---------------------------------------------------------------------- // nsSMILAnimationFunction // // The animation function calculates animation values. It it is provided with // time parameters (sample time, repeat iteration etc.) and it uses this to // build an appropriate animation value by performing interpolation and // addition operations. // // It is responsible for implementing the animation parameters of an animation // element (e.g. from, by, to, values, calcMode, additive, accumulate, keyTimes, // keySplines) // class nsSMILAnimationFunction { public: nsSMILAnimationFunction(); /* * Sets the owning animation element which this class uses to query attribute * values and compare document positions. */ void SetAnimationElement(nsISMILAnimationElement* aAnimationElement); /* * Sets animation-specific attributes (or marks them dirty, in the case * of from/to/by/values). * * @param aAttribute The attribute being set * @param aValue The updated value of the attribute. * @param aResult The nsAttrValue object that may be used for storing the * parsed result. * @param aParseResult Outparam used for reporting parse errors. Will be set * to NS_OK if everything succeeds. * @return PR_TRUE if aAttribute is a recognized animation-related * attribute; PR_FALSE otherwise. */ virtual PRBool SetAttr(nsIAtom* aAttribute, const nsAString& aValue, nsAttrValue& aResult, nsresult* aParseResult = nsnull); /* * Unsets the given attribute. * * @returns PR_TRUE if aAttribute is a recognized animation-related * attribute; PR_FALSE otherwise. */ virtual PRBool UnsetAttr(nsIAtom* aAttribute); /** * Indicate a new sample has occurred. * * @param aSampleTime The sample time for this timed element expressed in * simple time. * @param aSimpleDuration The simple duration for this timed element. * @param aRepeatIteration The repeat iteration for this sample. The first * iteration has a value of 0. */ void SampleAt(nsSMILTime aSampleTime, const nsSMILTimeValue& aSimpleDuration, PRUint32 aRepeatIteration); /** * Indicate to sample using the last value defined for the animation function. * This value is not normally sampled due to the end-point exclusive timing * model but only occurs when the fill mode is "freeze" and the active * duration is an even multiple of the simple duration. * * @param aRepeatIteration The repeat iteration for this sample. The first * iteration has a value of 0. */ void SampleLastValue(PRUint32 aRepeatIteration); /** * Indicate that this animation is now active. This is used to instruct the * animation function that it should now add its result to the animation * sandwich. The begin time is also provided for proper prioritization of * animation functions, and for this reason, this method must be called * before either of the Sample methods. * * @param aBeginTime The begin time for the newly active interval. */ void Activate(nsSMILTime aBeginTime); /** * Indicate that this animation is no longer active. This is used to instruct * the animation function that it should no longer add its result to the * animation sandwich. * * @param aIsFrozen PR_TRUE if this animation should continue to contribute * to the animation sandwich using the most recent sample * parameters. */ void Inactivate(PRBool aIsFrozen); /** * Combines the result of this animation function for the last sample with the * specified value. * * @param aSMILAttr This animation's target attribute. Used here for * doing attribute-specific parsing of from/to/by/values. * * @param aResult The value to compose with. */ void ComposeResult(const nsISMILAttr& aSMILAttr, nsSMILValue& aResult); /** * Returns the relative priority of this animation to another. The priority is * used for determining the position of the animation in the animation * sandwich -- higher priority animations are applied on top of lower * priority animations. * * @return -1 if this animation has lower priority or 1 if this animation has * higher priority * * This method should never return any other value, including 0. */ PRInt8 CompareTo(const nsSMILAnimationFunction* aOther) const; /* * The following methods are provided so that the compositor can optimize its * operations by only composing those animation that will affect the final * result. */ /** * Indicates if the animation is currently active or frozen. Inactive * animations will not contribute to the composed result. * * @return PR_TRUE if the animation is active or frozen, PR_FALSE otherwise. */ PRBool IsActiveOrFrozen() const { /* * - Frozen animations should be considered active for the purposes of * compositing. * - This function does not assume that our nsSMILValues (by/from/to/values) * have already been parsed. */ return (mIsActive || mIsFrozen); } /** * Indicates if this animation will replace the passed in result rather than * adding to it. Animations that replace the underlying value may be called * without first calling lower priority animations. * * @return True if the animation will replace, false if it will add or * otherwise build on the passed in value. */ virtual PRBool WillReplace() const; /** * Indicates if the parameters for this animation have changed since the last * time it was composited. This allows rendering to be performed only when * necessary, particularly when no animations are active. * * Note that the caller is responsible for determining if the animation * target has changed (with help from my UpdateCachedTarget() method). * * @return PR_TRUE if the animation parameters have changed, PR_FALSE * otherwise. */ PRBool HasChanged() const; /** * This method lets us clear the 'HasChanged' flag for inactive animations * after we've reacted to their change to the 'inactive' state, so that we * won't needlessly recompose their targets in every sample. * * This should only be called on an animation function that is inactive and * that returns PR_TRUE from HasChanged(). */ void ClearHasChanged() { NS_ABORT_IF_FALSE(HasChanged(), "clearing mHasChanged flag, when it's already PR_FALSE"); NS_ABORT_IF_FALSE(!IsActiveOrFrozen(), "clearing mHasChanged flag for active animation"); mHasChanged = PR_FALSE; } /** * Updates the cached record of our animation target, and returns a boolean * that indicates whether the target has changed since the last call to this * function. (This lets nsSMILCompositor check whether its animation * functions have changed value or target since the last sample. If none of * them have, then the compositor doesn't need to do anything.) * * @param aNewTarget A nsSMILTargetIdentifier representing the animation * target of this function for this sample. * @return PR_TRUE if |aNewTarget| is different from the old cached value; * otherwise, PR_FALSE. */ PRBool UpdateCachedTarget(const nsSMILTargetIdentifier& aNewTarget); // Comparator utility class, used for sorting nsSMILAnimationFunctions class Comparator { public: PRBool Equals(const nsSMILAnimationFunction* aElem1, const nsSMILAnimationFunction* aElem2) const { return (aElem1->CompareTo(aElem2) == 0); } PRBool LessThan(const nsSMILAnimationFunction* aElem1, const nsSMILAnimationFunction* aElem2) const { return (aElem1->CompareTo(aElem2) < 0); } }; protected: // Typedefs typedef nsTArray nsSMILValueArray; // Types enum nsSMILCalcMode { CALC_LINEAR, CALC_DISCRETE, CALC_PACED, CALC_SPLINE }; // Used for sorting nsSMILAnimationFunctions nsSMILTime GetBeginTime() const { return mBeginTime; } // Property getters PRBool GetAccumulate() const; PRBool GetAdditive() const; virtual nsSMILCalcMode GetCalcMode() const; // Property setters nsresult SetAccumulate(const nsAString& aAccumulate, nsAttrValue& aResult); nsresult SetAdditive(const nsAString& aAdditive, nsAttrValue& aResult); nsresult SetCalcMode(const nsAString& aCalcMode, nsAttrValue& aResult); nsresult SetKeyTimes(const nsAString& aKeyTimes, nsAttrValue& aResult); nsresult SetKeySplines(const nsAString& aKeySplines, nsAttrValue& aResult); // Property un-setters void UnsetAccumulate(); void UnsetAdditive(); void UnsetCalcMode(); void UnsetKeyTimes(); void UnsetKeySplines(); // Helpers virtual nsresult InterpolateResult(const nsSMILValueArray& aValues, nsSMILValue& aResult, nsSMILValue& aBaseValue); nsresult AccumulateResult(const nsSMILValueArray& aValues, nsSMILValue& aResult); nsresult ComputePacedPosition(const nsSMILValueArray& aValues, double aSimpleProgress, double& aIntervalProgress, const nsSMILValue*& aFrom, const nsSMILValue*& aTo); double ComputePacedTotalDistance(const nsSMILValueArray& aValues) const; /** * Adjust the simple progress, that is, the point within the simple duration, * by applying any keyTimes. */ double ScaleSimpleProgress(double aProgress, nsSMILCalcMode aCalcMode); /** * Adjust the progress within an interval, that is, between two animation * values, by applying any keySplines. */ double ScaleIntervalProgress(double aProgress, PRUint32 aIntervalIndex); // Convenience attribute getters -- use these instead of querying // mAnimationElement as these may need to be overridden by subclasses virtual PRBool HasAttr(nsIAtom* aAttName) const; virtual const nsAttrValue* GetAttr(nsIAtom* aAttName) const; virtual PRBool GetAttr(nsIAtom* aAttName, nsAString& aResult) const; PRBool ParseAttr(nsIAtom* aAttName, const nsISMILAttr& aSMILAttr, nsSMILValue& aResult, PRBool& aPreventCachingOfSandwich) const; virtual nsresult GetValues(const nsISMILAttr& aSMILAttr, nsSMILValueArray& aResult); virtual void CheckValueListDependentAttrs(PRUint32 aNumValues); void CheckKeyTimes(PRUint32 aNumValues); void CheckKeySplines(PRUint32 aNumValues); virtual PRBool IsToAnimation() const { return !HasAttr(nsGkAtoms::values) && HasAttr(nsGkAtoms::to) && !HasAttr(nsGkAtoms::from); } inline PRBool IsAdditive() const { /* * Animation is additive if: * * (1) additive = "sum" (GetAdditive() == true), or * (2) it is 'by animation' (by is set, from and values are not) * * Although animation is not additive if it is 'to animation' */ PRBool isByAnimation = (!HasAttr(nsGkAtoms::values) && HasAttr(nsGkAtoms::by) && !HasAttr(nsGkAtoms::from)); return !IsToAnimation() && (GetAdditive() || isByAnimation); } // Setters for error flags // These correspond to bit-indices in mErrorFlags, for tracking parse errors // in these attributes, when those parse errors should block us from doing // animation. enum AnimationAttributeIdx { BF_ACCUMULATE = 0, BF_ADDITIVE = 1, BF_CALC_MODE = 2, BF_KEY_TIMES = 3, BF_KEY_SPLINES = 4, BF_KEY_POINTS = 5 // only }; inline void SetAccumulateErrorFlag(PRBool aNewValue) { SetErrorFlag(BF_ACCUMULATE, aNewValue); } inline void SetAdditiveErrorFlag(PRBool aNewValue) { SetErrorFlag(BF_ADDITIVE, aNewValue); } inline void SetCalcModeErrorFlag(PRBool aNewValue) { SetErrorFlag(BF_CALC_MODE, aNewValue); } inline void SetKeyTimesErrorFlag(PRBool aNewValue) { SetErrorFlag(BF_KEY_TIMES, aNewValue); } inline void SetKeySplinesErrorFlag(PRBool aNewValue) { SetErrorFlag(BF_KEY_SPLINES, aNewValue); } inline void SetKeyPointsErrorFlag(PRBool aNewValue) { SetErrorFlag(BF_KEY_POINTS, aNewValue); } // Helper method -- based on SET_BOOLBIT in nsHTMLInputElement.cpp inline void SetErrorFlag(AnimationAttributeIdx aField, PRBool aValue) { if (aValue) { mErrorFlags |= (0x01 << aField); } else { mErrorFlags &= ~(0x01 << aField); } } // Members // ------- static nsAttrValue::EnumTable sAdditiveTable[]; static nsAttrValue::EnumTable sCalcModeTable[]; static nsAttrValue::EnumTable sAccumulateTable[]; nsTArray mKeyTimes; nsTArray mKeySplines; PRPackedBool mIsActive; PRPackedBool mIsFrozen; // These are the parameters provided by the previous sample. Currently we // perform lazy calculation. That is, we only calculate the result if and when // instructed by the compositor. This allows us to apply the result directly // to the animation value and allows the compositor to filter out functions // that it determines will not contribute to the final result. nsSMILTime mSampleTime; // sample time within simple dur nsSMILTimeValue mSimpleDuration; PRUint32 mRepeatIteration; PRPackedBool mLastValue; PRPackedBool mHasChanged; PRPackedBool mValueNeedsReparsingEverySample; nsSMILTime mBeginTime; // document time // The owning animation element. This is used for sorting based on document // position and for fetching attribute values stored in the element. // Raw pointer is OK here, because this nsSMILAnimationFunction can't outlive // its owning animation element. nsISMILAnimationElement* mAnimationElement; // Which attributes have been set but have had errors. This is not used for // all attributes but only those which have specified error behaviour // associated with them. PRUint16 mErrorFlags; // This is for the very specific case where we have a 'to' animation that is // frozen part way through the simple duration and there are other active // lower-priority animations targetting the same attribute. In this case // SMILANIM 3.3.6 says: // // The value for F(t) when a to-animation is frozen (at the end of the // simple duration) is just the to value. If a to-animation is frozen // anywhere within the simple duration (e.g., using a repeatCount of "2.5"), // the value for F(t) when the animation is frozen is the value computed for // the end of the active duration. Even if other, lower priority animations // are active while a to-animation is frozen, the value for F(t) does not // change. // // To implement this properly we'd need to force a resample of all the lower // priority animations at the active end of this animation--something which // would introduce unwanted coupling between the timing and animation model. // Instead we just save the value calculated when this animation is frozen (in // which case this animation will be sampled at the active end and the lower // priority animations should be sampled at a time pretty close to this, // provided we have a reasonable frame rate and we aren't seeking). // // @see // http://www.w3.org/TR/2001/REC-smil-animation-20010904/#FromToByAndAdditive nsSMILValue mFrozenValue; // Allows us to check whether an animation function has changed target from // sample to sample (because if neither target nor animated value have // changed, we don't have to do anything). nsSMILWeakTargetIdentifier mLastTarget; }; #endif // NS_SMILANIMATIONFUNCTION_H_