From c6e8912c9f831a7d9992662c2ebc854ddcdc9c2b Mon Sep 17 00:00:00 2001 From: Boris Zbarsky Date: Mon, 13 Jan 2014 15:08:55 -0500 Subject: [PATCH 01/19] Bug 881487. Make anchor scrolls on wyciwyg documents work correctly. r=smaug --- docshell/base/nsDocShell.cpp | 25 +++++---- ...ile_anchor_scroll_after_document_open.html | 15 +++++ docshell/test/mochitest.ini | 2 + ...est_anchor_scroll_after_document_open.html | 55 +++++++++++++++++++ 4 files changed, 87 insertions(+), 10 deletions(-) create mode 100644 docshell/test/file_anchor_scroll_after_document_open.html create mode 100644 docshell/test/test_anchor_scroll_after_document_open.html diff --git a/docshell/base/nsDocShell.cpp b/docshell/base/nsDocShell.cpp index a2f95ff0e51..a95989d5158 100644 --- a/docshell/base/nsDocShell.cpp +++ b/docshell/base/nsDocShell.cpp @@ -9115,13 +9115,21 @@ nsDocShell::InternalLoad(nsIURI * aURI, aLoadType == LOAD_HISTORY || aLoadType == LOAD_LINK) { - // Split mCurrentURI and aURI on the '#' character. Make sure we read + nsCOMPtr currentURI; + if (sURIFixup && mCurrentURI) { + rv = sURIFixup->CreateExposableURI(mCurrentURI, + getter_AddRefs(currentURI)); + NS_ENSURE_SUCCESS(rv, rv); + } else { + currentURI = mCurrentURI; + } + // Split currentURI and aURI on the '#' character. Make sure we read // the return values of SplitURIAtHash; if it fails, we don't want to // allow a short-circuited navigation. nsAutoCString curBeforeHash, curHash, newBeforeHash, newHash; nsresult splitRv1, splitRv2; - splitRv1 = mCurrentURI ? - nsContentUtils::SplitURIAtHash(mCurrentURI, + splitRv1 = currentURI ? + nsContentUtils::SplitURIAtHash(currentURI, curBeforeHash, curHash) : NS_ERROR_FAILURE; splitRv2 = nsContentUtils::SplitURIAtHash(aURI, newBeforeHash, newHash); @@ -9179,9 +9187,6 @@ nsDocShell::InternalLoad(nsIURI * aURI, mDocumentRequest->Cancel(NS_BINDING_ABORTED); } - // Save the current URI; we need it if we fire a hashchange later. - nsCOMPtr oldURI = mCurrentURI; - // Save the position of the scrollers. nscoord cx = 0, cy = 0; GetCurScrollPos(ScrollOrientation_X, &cx); @@ -9342,15 +9347,15 @@ nsDocShell::InternalLoad(nsIURI * aURI, } if (doHashchange) { - // Make sure to use oldURI here, not mCurrentURI, because by - // now, mCurrentURI has changed! - win->DispatchAsyncHashchange(oldURI, aURI); + // Note that currentURI hasn't changed because it's on the + // stack, so we can just use it directly as the old URI. + win->DispatchAsyncHashchange(currentURI, aURI); } } // Inform the favicon service that the favicon for oldURI also // applies to aURI. - CopyFavicon(oldURI, aURI, mInPrivateBrowsing); + CopyFavicon(currentURI, aURI, mInPrivateBrowsing); return NS_OK; } diff --git a/docshell/test/file_anchor_scroll_after_document_open.html b/docshell/test/file_anchor_scroll_after_document_open.html new file mode 100644 index 00000000000..7903380eac6 --- /dev/null +++ b/docshell/test/file_anchor_scroll_after_document_open.html @@ -0,0 +1,15 @@ + + diff --git a/docshell/test/mochitest.ini b/docshell/test/mochitest.ini index 4776de84e0f..44953253301 100644 --- a/docshell/test/mochitest.ini +++ b/docshell/test/mochitest.ini @@ -11,6 +11,7 @@ support-files = bug668513_redirect.html bug668513_redirect.html^headers^ bug691547_frame.html + file_anchor_scroll_after_document_open.html file_bug385434_1.html file_bug385434_2.html file_bug385434_3.html @@ -33,6 +34,7 @@ support-files = file_bug728939.html historyframes.html +[test_anchor_scroll_after_document_open.html] [test_bfcache_plus_hash.html] [test_bug123696.html] [test_bug369814.html] diff --git a/docshell/test/test_anchor_scroll_after_document_open.html b/docshell/test/test_anchor_scroll_after_document_open.html new file mode 100644 index 00000000000..93fa4615b42 --- /dev/null +++ b/docshell/test/test_anchor_scroll_after_document_open.html @@ -0,0 +1,55 @@ + + + + + + Test for Bug 881487 + + + + + +Mozilla Bug 881487 +

+ + +

+ +
+
+ + From 9cd7f0e1796312bbdf85653682ff1b4c527c0d63 Mon Sep 17 00:00:00 2001 From: Boris Zbarsky Date: Mon, 13 Jan 2014 15:08:56 -0500 Subject: [PATCH 02/19] Bug 957479. Make pushState work correctly after document.open(). r=smaug --- docshell/base/nsDocShell.cpp | 26 ++++++++----- .../file_pushState_after_document_open.html | 11 ++++++ docshell/test/mochitest.ini | 2 + .../test_pushState_after_document_open.html | 37 +++++++++++++++++++ 4 files changed, 67 insertions(+), 9 deletions(-) create mode 100644 docshell/test/file_pushState_after_document_open.html create mode 100644 docshell/test/test_pushState_after_document_open.html diff --git a/docshell/base/nsDocShell.cpp b/docshell/base/nsDocShell.cpp index a95989d5158..ca080b06df3 100644 --- a/docshell/base/nsDocShell.cpp +++ b/docshell/base/nsDocShell.cpp @@ -10566,10 +10566,18 @@ nsDocShell::AddState(const JS::Value &aData, const nsAString& aTitle, // Step 2: Resolve aURL bool equalURIs = true; - nsCOMPtr oldURI = mCurrentURI; + nsCOMPtr currentURI; + if (sURIFixup && mCurrentURI) { + rv = sURIFixup->CreateExposableURI(mCurrentURI, + getter_AddRefs(currentURI)); + NS_ENSURE_SUCCESS(rv, rv); + } else { + currentURI = mCurrentURI; + } + nsCOMPtr oldURI = currentURI; nsCOMPtr newURI; if (aURL.Length() == 0) { - newURI = mCurrentURI; + newURI = currentURI; } else { // 2a: Resolve aURL relative to mURI @@ -10599,7 +10607,7 @@ nsDocShell::AddState(const JS::Value &aData, const nsAString& aTitle, // the new URI has the same origin as our current URI, we also // check that the two URIs have the same userpass. (The // security manager says that |http://foo.com| and - // |http://me@foo.com| have the same origin.) mCurrentURI + // |http://me@foo.com| have the same origin.) currentURI // won't contain the password part of the userpass, so this // means that it's never valid to specify a password in a // pushState or replaceState URI. @@ -10609,14 +10617,14 @@ nsDocShell::AddState(const JS::Value &aData, const nsAString& aTitle, NS_ENSURE_TRUE(secMan, NS_ERROR_FAILURE); // It's very important that we check that newURI is of the same - // origin as mCurrentURI, not docBaseURI, because a page can + // origin as currentURI, not docBaseURI, because a page can // set docBaseURI arbitrarily to any domain. nsAutoCString currentUserPass, newUserPass; - NS_ENSURE_SUCCESS(mCurrentURI->GetUserPass(currentUserPass), + NS_ENSURE_SUCCESS(currentURI->GetUserPass(currentUserPass), NS_ERROR_FAILURE); NS_ENSURE_SUCCESS(newURI->GetUserPass(newUserPass), NS_ERROR_FAILURE); - if (NS_FAILED(secMan->CheckSameOriginURI(mCurrentURI, + if (NS_FAILED(secMan->CheckSameOriginURI(currentURI, newURI, true)) || !currentUserPass.Equals(newUserPass)) { @@ -10641,8 +10649,8 @@ nsDocShell::AddState(const JS::Value &aData, const nsAString& aTitle, } } - if (mCurrentURI) { - mCurrentURI->Equals(newURI, &equalURIs); + if (currentURI) { + currentURI->Equals(newURI, &equalURIs); } else { equalURIs = false; @@ -10704,7 +10712,7 @@ nsDocShell::AddState(const JS::Value &aData, const nsAString& aTitle, // SHEntry's URI was modified in this way by a push/replaceState call // set URIWasModified to true for the current SHEntry (bug 669671). bool sameExceptHashes = true, oldURIWasModified = false; - newURI->EqualsExceptRef(mCurrentURI, &sameExceptHashes); + newURI->EqualsExceptRef(currentURI, &sameExceptHashes); oldOSHE->GetURIWasModified(&oldURIWasModified); newSHEntry->SetURIWasModified(!sameExceptHashes || oldURIWasModified); diff --git a/docshell/test/file_pushState_after_document_open.html b/docshell/test/file_pushState_after_document_open.html new file mode 100644 index 00000000000..97a6954f2ee --- /dev/null +++ b/docshell/test/file_pushState_after_document_open.html @@ -0,0 +1,11 @@ + + diff --git a/docshell/test/mochitest.ini b/docshell/test/mochitest.ini index 44953253301..06ac16ba6d7 100644 --- a/docshell/test/mochitest.ini +++ b/docshell/test/mochitest.ini @@ -32,6 +32,7 @@ support-files = file_bug680257.html file_bug703855.html file_bug728939.html + file_pushState_after_document_open.html historyframes.html [test_anchor_scroll_after_document_open.html] @@ -71,4 +72,5 @@ support-files = [test_bug728939.html] [test_bug797909.html] [test_framedhistoryframes.html] +[test_pushState_after_document_open.html] [test_windowedhistoryframes.html] diff --git a/docshell/test/test_pushState_after_document_open.html b/docshell/test/test_pushState_after_document_open.html new file mode 100644 index 00000000000..51ba1050c21 --- /dev/null +++ b/docshell/test/test_pushState_after_document_open.html @@ -0,0 +1,37 @@ + + + + + + Test for Bug 957479 + + + + + +Mozilla Bug 957479 +

+ +
+
+ + From 661130813abe4722190d5dc79279ac63056a4ec2 Mon Sep 17 00:00:00 2001 From: Boris Zbarsky Date: Mon, 13 Jan 2014 15:08:56 -0500 Subject: [PATCH 03/19] Bug 952365. Add a TreatNonObjectAsNull annotation for WebIDL callback functions and use it for event handlers, since web sites depend on assigning non-callable objects to them in some cases. r=peterv --- dom/bindings/CallbackFunction.h | 1 - dom/bindings/Codegen.py | 43 +++++++++-- dom/bindings/parser/WebIDL.py | 18 ++++- .../tests/test_treatNonCallableAsNull.py | 15 ++++ dom/bindings/test/mochitest.ini | 1 + .../test/test_treat_non_object_as_null.html | 39 ++++++++++ .../test_event-handler-spec-example.html | 73 +++++++++++++++---- dom/webidl/EventHandler.webidl | 6 +- 8 files changed, 168 insertions(+), 28 deletions(-) create mode 100644 dom/bindings/test/test_treat_non_object_as_null.html diff --git a/dom/bindings/CallbackFunction.h b/dom/bindings/CallbackFunction.h index 63a48af5374..400c19942be 100644 --- a/dom/bindings/CallbackFunction.h +++ b/dom/bindings/CallbackFunction.h @@ -29,7 +29,6 @@ public: nsIGlobalObject* aIncumbentGlobal) : CallbackObject(aCallable, aIncumbentGlobal) { - MOZ_ASSERT(JS_ObjectIsCallable(nullptr, mCallback)); } JS::Handle Callable() const diff --git a/dom/bindings/Codegen.py b/dom/bindings/Codegen.py index d72cb64b6c3..d16a2e6fc45 100644 --- a/dom/bindings/Codegen.py +++ b/dom/bindings/Codegen.py @@ -2841,8 +2841,9 @@ def getJSToNativeConversionInfo(type, descriptorProvider, failureCode=None, If lenientFloatCode is not None, it should be used in cases when we're a non-finite float that's not unrestricted. - If allowTreatNonCallableAsNull is true, then [TreatNonCallableAsNull] - extended attributes on nullable callback functions will be honored. + If allowTreatNonCallableAsNull is true, then [TreatNonCallableAsNull] and + [TreatNonObjectAsNull] extended attributes on nullable callback functions + will be honored. If isCallbackReturnValue is "JSImpl" or "Callback", then the declType may be adjusted to make it easier to return from a callback. Since that type is @@ -3737,6 +3738,8 @@ for (uint32_t i = 0; i < length; ++i) { if type.isCallback(): assert not isEnforceRange and not isClamp assert not type.treatNonCallableAsNull() or type.nullable() + assert not type.treatNonObjectAsNull() or type.nullable() + assert not type.treatNonObjectAsNull() or not type.treatNonCallableAsNull() name = type.unroll().identifier.name if type.nullable(): @@ -3758,6 +3761,17 @@ for (uint32_t i = 0; i < length; ++i) { "} else {\n" " ${declName} = nullptr;\n" "}") + elif allowTreatNonCallableAsNull and type.treatNonObjectAsNull(): + if not isDefinitelyObject: + haveObject = "${val}.isObject()" + if defaultValue is not None: + assert(isinstance(defaultValue, IDLNullValue)) + haveObject = "${haveValue} && " + haveObject + template = CGIfElseWrapper(haveObject, + CGGeneric(conversion), + CGGeneric("${declName} = nullptr;")).define() + else: + template = conversion else: template = wrapObjectTemplate( "if (JS_ObjectIsCallable(cx, &${val}.toObject())) {\n" + @@ -10774,6 +10788,7 @@ class CGCallback(CGClass): getters=[], setters=[]): self.baseName = baseName self._deps = idlObject.getDeps() + self.idlObject = idlObject name = idlObject.identifier.name if isJSImplementedDescriptor(descriptorProvider): name = jsImplName(name) @@ -10801,6 +10816,13 @@ class CGCallback(CGClass): methods=realMethods+getters+setters) def getConstructors(self): + if (not self.idlObject.isInterface() and + not self.idlObject._treatNonObjectAsNull): + body = "MOZ_ASSERT(JS_ObjectIsCallable(nullptr, mCallback));" + else: + # Not much we can assert about it, other than not being null, and + # CallbackObject does that already. + body = "" return [ClassConstructor( [Argument("JS::Handle", "aCallback"), Argument("nsIGlobalObject*", "aIncumbentGlobal")], bodyInHeader=True, @@ -10808,7 +10830,8 @@ class CGCallback(CGClass): explicit=True, baseConstructors=[ "%s(aCallback, aIncumbentGlobal)" % self.baseName, - ])] + ], + body=body)] def getMethodImpls(self, method): assert method.needThisHandling @@ -10872,6 +10895,7 @@ class CGCallback(CGClass): class CGCallbackFunction(CGCallback): def __init__(self, callback, descriptorProvider): + self.callback = callback CGCallback.__init__(self, callback, descriptorProvider, "CallbackFunction", methods=[CallCallback(callback, descriptorProvider)]) @@ -11176,7 +11200,8 @@ class CallbackMethod(CallbackMember): replacements = { "errorReturn" : self.getDefaultRetval(), "thisObj": self.getThisObj(), - "getCallable": self.getCallableDecl() + "getCallable": self.getCallableDecl(), + "callGuard": self.getCallGuard() } if self.argCount > 0: replacements["argv"] = "argv.begin()" @@ -11185,7 +11210,7 @@ class CallbackMethod(CallbackMember): replacements["argv"] = "nullptr" replacements["argc"] = "0" return string.Template("${getCallable}" - "if (!JS_CallFunctionValue(cx, ${thisObj}, callable,\n" + "if (${callGuard}!JS_CallFunctionValue(cx, ${thisObj}, callable,\n" " ${argc}, ${argv}, rval.address())) {\n" " aRv.Throw(NS_ERROR_UNEXPECTED);\n" " return${errorReturn};\n" @@ -11206,6 +11231,11 @@ class CallCallback(CallbackMethod): def getPrettyName(self): return self.callback.identifier.name + def getCallGuard(self): + if self.callback._treatNonObjectAsNull: + return "JS_ObjectIsCallable(cx, mCallback) && " + return "" + class CallbackOperationBase(CallbackMethod): """ Common class for implementing various callback operations. @@ -11244,6 +11274,9 @@ class CallbackOperationBase(CallbackMethod): '%s' '}\n' % CGIndenter(CGGeneric(getCallableFromProp)).define()) + def getCallGuard(self): + return "" + class CallbackOperation(CallbackOperationBase): """ Codegen actual WebIDL operations on callback interfaces. diff --git a/dom/bindings/parser/WebIDL.py b/dom/bindings/parser/WebIDL.py index 1f9fd24aa94..bede74e7675 100644 --- a/dom/bindings/parser/WebIDL.py +++ b/dom/bindings/parser/WebIDL.py @@ -876,6 +876,9 @@ class IDLInterface(IDLObjectWithScope): if identifier == "TreatNonCallableAsNull": raise WebIDLError("TreatNonCallableAsNull cannot be specified on interfaces", [attr.location, self.location]) + if identifier == "TreatNonObjectAsNull": + raise WebIDLError("TreatNonObjectAsNull cannot be specified on interfaces", + [attr.location, self.location]) elif identifier == "NoInterfaceObject": if not attr.noArguments(): raise WebIDLError("[NoInterfaceObject] must take no arguments", @@ -1411,6 +1414,10 @@ class IDLType(IDLObject): assert self.tag() == IDLType.Tags.callback return self.nullable() and self.inner._treatNonCallableAsNull + def treatNonObjectAsNull(self): + assert self.tag() == IDLType.Tags.callback + return self.nullable() and self.inner._treatNonObjectAsNull + def addExtendedAttributes(self, attrs): assert len(attrs) == 0 @@ -2690,10 +2697,7 @@ class IDLAttribute(IDLInterfaceMember): def handleExtendedAttribute(self, attr): identifier = attr.identifier() - if identifier == "TreatNonCallableAsNull": - raise WebIDLError("TreatNonCallableAsNull cannot be specified on attributes", - [attr.location, self.location]) - elif identifier == "SetterThrows" and self.readonly: + if identifier == "SetterThrows" and self.readonly: raise WebIDLError("Readonly attributes must not be flagged as " "[SetterThrows]", [self.location]) @@ -2937,6 +2941,7 @@ class IDLCallbackType(IDLType, IDLObjectWithScope): argument.resolve(self) self._treatNonCallableAsNull = False + self._treatNonObjectAsNull = False def isCallback(self): return True @@ -2982,8 +2987,13 @@ class IDLCallbackType(IDLType, IDLObjectWithScope): for attr in attrs: if attr.identifier() == "TreatNonCallableAsNull": self._treatNonCallableAsNull = True + elif attr.identifier() == "TreatNonObjectAsNull": + self._treatNonObjectAsNull = True else: unhandledAttrs.append(attr) + if self._treatNonCallableAsNull and self._treatNonObjectAsNull: + raise WebIDLError("Cannot specify both [TreatNonCallableAsNull] " + "and [TreatNonObjectAsNull]", [self.location]) if len(unhandledAttrs) != 0: IDLType.addExtendedAttributes(self, unhandledAttrs) diff --git a/dom/bindings/parser/tests/test_treatNonCallableAsNull.py b/dom/bindings/parser/tests/test_treatNonCallableAsNull.py index f89ed06eda3..7a0bde8a6dc 100644 --- a/dom/bindings/parser/tests/test_treatNonCallableAsNull.py +++ b/dom/bindings/parser/tests/test_treatNonCallableAsNull.py @@ -54,3 +54,18 @@ def WebIDLTest(parser, harness): threw = True harness.ok(threw, "Should have thrown.") + + parser = parser.reset() + + threw = False + try: + parser.parse(""" + [TreatNonCallableAsNull, TreatNonObjectAsNull] + callback Function = any(any... arguments); + """) + + results = parser.finish() + except: + threw = True + + harness.ok(threw, "Should have thrown.") diff --git a/dom/bindings/test/mochitest.ini b/dom/bindings/test/mochitest.ini index e6fbde9ea04..77d94cbd106 100644 --- a/dom/bindings/test/mochitest.ini +++ b/dom/bindings/test/mochitest.ini @@ -31,4 +31,5 @@ support-files = [test_namedNoIndexed.html] [test_queryInterface.html] [test_sequence_wrapping.html] +[test_treat_non_object_as_null.html] [test_traceProtos.html] diff --git a/dom/bindings/test/test_treat_non_object_as_null.html b/dom/bindings/test/test_treat_non_object_as_null.html new file mode 100644 index 00000000000..ddcb73a87f7 --- /dev/null +++ b/dom/bindings/test/test_treat_non_object_as_null.html @@ -0,0 +1,39 @@ + + + + + + Test for Bug 952365 + + + + + +Mozilla Bug 952365 +

+ +
+
+ + diff --git a/dom/imptests/html/html/webappapis/scripting/events/test_event-handler-spec-example.html b/dom/imptests/html/html/webappapis/scripting/events/test_event-handler-spec-example.html index 28273f1b95f..6852e86caa6 100644 --- a/dom/imptests/html/html/webappapis/scripting/events/test_event-handler-spec-example.html +++ b/dom/imptests/html/html/webappapis/scripting/events/test_event-handler-spec-example.html @@ -3,20 +3,63 @@
- diff --git a/dom/webidl/EventHandler.webidl b/dom/webidl/EventHandler.webidl index fd1d811b16b..ee3c0eda44b 100644 --- a/dom/webidl/EventHandler.webidl +++ b/dom/webidl/EventHandler.webidl @@ -10,17 +10,17 @@ * Opera Software ASA. You are granted a license to use, reproduce * and create derivative works of this document. */ -[TreatNonCallableAsNull] +[TreatNonObjectAsNull] callback EventHandlerNonNull = any (Event event); typedef EventHandlerNonNull? EventHandler; -[TreatNonCallableAsNull] +[TreatNonObjectAsNull] // https://www.w3.org/Bugs/Public/show_bug.cgi?id=23489 //callback OnBeforeUnloadEventHandlerNonNull = DOMString (Event event); callback OnBeforeUnloadEventHandlerNonNull = DOMString? (Event event); typedef OnBeforeUnloadEventHandlerNonNull? OnBeforeUnloadEventHandler; -[TreatNonCallableAsNull] +[TreatNonObjectAsNull] callback OnErrorEventHandlerNonNull = boolean ((Event or DOMString) event, optional DOMString source, optional unsigned long lineno, optional unsigned long column); typedef OnErrorEventHandlerNonNull? OnErrorEventHandler; From 7ad0d371c908aae13305b3c91d927e0ec95c27e8 Mon Sep 17 00:00:00 2001 From: Boris Zbarsky Date: Mon, 13 Jan 2014 15:08:57 -0500 Subject: [PATCH 04/19] Bug 957929. Pass undefined, not null, as the this value to callbacks if no other value is provided. r=peterv --- dom/bindings/Codegen.py | 28 ++++++++------- dom/bindings/test/mochitest.ini | 1 + .../test/test_callback_default_thisval.html | 36 +++++++++++++++++++ 3 files changed, 52 insertions(+), 13 deletions(-) create mode 100644 dom/bindings/test/test_callback_default_thisval.html diff --git a/dom/bindings/Codegen.py b/dom/bindings/Codegen.py index d16a2e6fc45..18e338201a9 100644 --- a/dom/bindings/Codegen.py +++ b/dom/bindings/Codegen.py @@ -10839,13 +10839,13 @@ class CGCallback(CGClass): # Strip out the JSContext*/JSObject* args # that got added. assert args[0].name == "cx" and args[0].argType == "JSContext*" - assert args[1].name == "aThisObj" and args[1].argType == "JS::Handle" + assert args[1].name == "aThisVal" and args[1].argType == "JS::Handle" args = args[2:] # Record the names of all the arguments, so we can use them when we call # the private method. argnames = [arg.name for arg in args] - argnamesWithThis = ["s.GetContext()", "thisObjJS"] + argnames - argnamesWithoutThis = ["s.GetContext()", "JS::NullPtr()"] + argnames + argnamesWithThis = ["s.GetContext()", "thisValJS"] + argnames + argnamesWithoutThis = ["s.GetContext()", "JS::UndefinedHandleValue"] + argnames # Now that we've recorded the argnames for our call to our private # method, insert our optional argument for deciding whether the # CallSetup should re-throw exceptions on aRv. @@ -10869,6 +10869,8 @@ class CGCallback(CGClass): " aRv.Throw(NS_ERROR_FAILURE);\n" " return${errorReturn};\n" "}\n" + "JS::Rooted thisValJS(s.GetContext(),\n" + " JS::ObjectValue(*thisObjJS));\n" "return ${methodName}(${callArgs});").substitute({ "errorReturn" : method.getDefaultRetval(), "callArgs" : ", ".join(argnamesWithThis), @@ -11143,10 +11145,10 @@ class CallbackMember(CGNativeMember): args.append(Argument("ExceptionHandling", "aExceptionHandling", "eReportExceptions")) return args - # We want to allow the caller to pass in a "this" object, as + # We want to allow the caller to pass in a "this" value, as # well as a JSContext. return [Argument("JSContext*", "cx"), - Argument("JS::Handle", "aThisObj")] + args + Argument("JS::Handle", "aThisVal")] + args def getCallSetup(self): if self.needThisHandling: @@ -11199,7 +11201,7 @@ class CallbackMethod(CallbackMember): def getCall(self): replacements = { "errorReturn" : self.getDefaultRetval(), - "thisObj": self.getThisObj(), + "thisVal": self.getThisVal(), "getCallable": self.getCallableDecl(), "callGuard": self.getCallGuard() } @@ -11210,8 +11212,8 @@ class CallbackMethod(CallbackMember): replacements["argv"] = "nullptr" replacements["argc"] = "0" return string.Template("${getCallable}" - "if (${callGuard}!JS_CallFunctionValue(cx, ${thisObj}, callable,\n" - " ${argc}, ${argv}, rval.address())) {\n" + "if (${callGuard}!JS::Call(cx, ${thisVal}, callable,\n" + " ${argc}, ${argv}, &rval)) {\n" " aRv.Throw(NS_ERROR_UNEXPECTED);\n" " return${errorReturn};\n" "}\n").substitute(replacements) @@ -11222,8 +11224,8 @@ class CallCallback(CallbackMethod): CallbackMethod.__init__(self, callback.signatures()[0], "Call", descriptorProvider, needThisHandling=True) - def getThisObj(self): - return "aThisObj" + def getThisVal(self): + return "aThisVal" def getCallableDecl(self): return "JS::Rooted callable(cx, JS::ObjectValue(*mCallback));\n" @@ -11245,13 +11247,13 @@ class CallbackOperationBase(CallbackMethod): self.methodName = descriptor.binaryNames.get(jsName, jsName) CallbackMethod.__init__(self, signature, nativeName, descriptor, singleOperation, rethrowContentException) - def getThisObj(self): + def getThisVal(self): if not self.singleOperation: - return "mCallback" + return "JS::ObjectValue(*mCallback)" # This relies on getCallableDecl declaring a boolean # isCallable in the case when we're a single-operation # interface. - return "isCallable ? aThisObj.get() : mCallback" + return "isCallable ? aThisVal.get() : JS::ObjectValue(*mCallback)" def getCallableDecl(self): replacements = { diff --git a/dom/bindings/test/mochitest.ini b/dom/bindings/test/mochitest.ini index 77d94cbd106..30b8b5d9a17 100644 --- a/dom/bindings/test/mochitest.ini +++ b/dom/bindings/test/mochitest.ini @@ -17,6 +17,7 @@ support-files = [test_bug852846.html] [test_bug862092.html] [test_barewordGetsWindow.html] +[test_callback_default_thisval.html] [test_cloneAndImportNode.html] [test_defineProperty.html] [test_enums.html] diff --git a/dom/bindings/test/test_callback_default_thisval.html b/dom/bindings/test/test_callback_default_thisval.html new file mode 100644 index 00000000000..f67d09ccce4 --- /dev/null +++ b/dom/bindings/test/test_callback_default_thisval.html @@ -0,0 +1,36 @@ + + + + + + Test for Bug 957929 + + + + + +Mozilla Bug 957929 +

+ +
+
+ + From b050660309ca1aaf891b6f54f53974571f5e9a67 Mon Sep 17 00:00:00 2001 From: "Nicholas D. Matsakis" Date: Wed, 8 Jan 2014 05:00:05 -0500 Subject: [PATCH 05/19] Bug 953270 - Canonicalize NaN on lane access r=till --- js/src/builtin/SIMD.cpp | 6 ++++- .../ecma_6/TypedObject/simd/bug953270.js | 27 +++++++++++++++++++ 2 files changed, 32 insertions(+), 1 deletion(-) create mode 100644 js/src/tests/ecma_6/TypedObject/simd/bug953270.js diff --git a/js/src/builtin/SIMD.cpp b/js/src/builtin/SIMD.cpp index 3d5845f990f..bae570e28d7 100644 --- a/js/src/builtin/SIMD.cpp +++ b/js/src/builtin/SIMD.cpp @@ -12,9 +12,13 @@ */ #include "builtin/SIMD.h" + #include "jsapi.h" #include "jsfriendapi.h" + #include "builtin/TypedObject.h" +#include "js/Value.h" + #include "jsobjinlines.h" using namespace js; @@ -48,7 +52,7 @@ struct Float32x4 { *out = v.toNumber(); } static void setReturn(CallArgs &args, float value) { - args.rval().setDouble(value); + args.rval().setDouble(JS::CanonicalizeNaN(value)); } }; diff --git a/js/src/tests/ecma_6/TypedObject/simd/bug953270.js b/js/src/tests/ecma_6/TypedObject/simd/bug953270.js new file mode 100644 index 00000000000..74ac44dc92b --- /dev/null +++ b/js/src/tests/ecma_6/TypedObject/simd/bug953270.js @@ -0,0 +1,27 @@ +// |reftest| skip-if(!this.hasOwnProperty("SIMD")) + +/* + * Any copyright is dedicated to the Public Domain. + * http://creativecommons.org/licenses/publicdomain/ + */ + +var BUGNUMBER = 953270; +var summary = 'Handles'; + +// Check that NaN normalization is applied when extracting the x lane +// out, after bit conversion has occurred. + +var int32x4 = SIMD.int32x4; +var a = int32x4((4294967295), 200, 300, 400); +var c = SIMD.int32x4.bitsToFloat32x4(a); + +// NaN canonicalization occurs when extracting out x lane: +assertEq(c.x, NaN); + +// but underlying bits are faithfully transmitted +// (though reinterpreted as a signed integer): +var d = SIMD.float32x4.bitsToInt32x4(c); +assertEq(d.x, -1); + +reportCompare(true, true); +print("Tests complete"); From 865a3925a09cd26ea4958116fba5e18a9763e25e Mon Sep 17 00:00:00 2001 From: Nathan Froyd Date: Fri, 10 Jan 2014 12:11:31 -0500 Subject: [PATCH 06/19] Bug 958262 - reduce space required by JSPropertySpec; r=till,bz,Waldo --- dom/bindings/BindingUtils.cpp | 10 +++---- dom/bindings/Codegen.py | 4 +-- js/src/jsapi.cpp | 29 +++++++++++--------- js/src/jsapi.h | 50 ++++++++++++++++++++++++++--------- 4 files changed, 62 insertions(+), 31 deletions(-) diff --git a/dom/bindings/BindingUtils.cpp b/dom/bindings/BindingUtils.cpp index 6dce37c1ed1..5aa2e68193a 100644 --- a/dom/bindings/BindingUtils.cpp +++ b/dom/bindings/BindingUtils.cpp @@ -951,21 +951,21 @@ XrayResolveAttribute(JSContext* cx, JS::Handle wrapper, // They all have getters, so we can just make it. JS::Rooted global(cx, JS_GetGlobalForObject(cx, wrapper)); JS::Rooted fun(cx, - JS_NewFunctionById(cx, (JSNative)attrSpec.getter.op, + JS_NewFunctionById(cx, (JSNative)attrSpec.getter.propertyOp.op, 0, 0, global, id)); if (!fun) return false; - SET_JITINFO(fun, attrSpec.getter.info); + SET_JITINFO(fun, attrSpec.getter.propertyOp.info); JSObject *funobj = JS_GetFunctionObject(fun); desc.setGetterObject(funobj); desc.attributesRef() |= JSPROP_GETTER; - if (attrSpec.setter.op) { + if (attrSpec.setter.propertyOp.op) { // We have a setter! Make it. - fun = JS_NewFunctionById(cx, (JSNative)attrSpec.setter.op, 1, 0, + fun = JS_NewFunctionById(cx, (JSNative)attrSpec.setter.propertyOp.op, 1, 0, global, id); if (!fun) return false; - SET_JITINFO(fun, attrSpec.setter.info); + SET_JITINFO(fun, attrSpec.setter.propertyOp.info); funobj = JS_GetFunctionObject(fun); desc.setSetterObject(funobj); desc.attributesRef() |= JSPROP_SETTER; diff --git a/dom/bindings/Codegen.py b/dom/bindings/Codegen.py index 18e338201a9..753831aad85 100644 --- a/dom/bindings/Codegen.py +++ b/dom/bindings/Codegen.py @@ -1649,7 +1649,7 @@ class AttrDefiner(PropertyDefiner): else: accessor = "genericGetter" jitinfo = "&%s_getterinfo" % attr.identifier.name - return "{ JS_CAST_NATIVE_TO(%s, JSPropertyOp), %s }" % \ + return "{ { JS_CAST_NATIVE_TO(%s, JSPropertyOp), %s } }" % \ (accessor, jitinfo) def setter(attr): @@ -1668,7 +1668,7 @@ class AttrDefiner(PropertyDefiner): else: accessor = "genericSetter" jitinfo = "&%s_setterinfo" % attr.identifier.name - return "{ JS_CAST_NATIVE_TO(%s, JSStrictPropertyOp), %s }" % \ + return "{ { JS_CAST_NATIVE_TO(%s, JSStrictPropertyOp), %s } }" % \ (accessor, jitinfo) def specData(attr): diff --git a/js/src/jsapi.cpp b/js/src/jsapi.cpp index 527108a3197..0adef45a61e 100644 --- a/js/src/jsapi.cpp +++ b/js/src/jsapi.cpp @@ -3289,10 +3289,23 @@ JS_DefineProperties(JSContext *cx, JSObject *objArg, const JSPropertySpec *ps) RootedObject obj(cx, objArg); bool ok; for (ok = true; ps->name; ps++) { - if (ps->selfHostedGetter) { + if (ps->flags & JSPROP_NATIVE_ACCESSORS) { + // If you declare native accessors, then you should have a native + // getter. + JS_ASSERT(ps->getter.propertyOp.op); + // If you do not have a self-hosted getter, you should not have a + // self-hosted setter. This is the closest approximation to that + // assertion we can have with our setup. + JS_ASSERT_IF(ps->setter.propertyOp.info, ps->setter.propertyOp.op); + + ok = DefineProperty(cx, obj, ps->name, UndefinedValue(), + ps->getter.propertyOp, ps->setter.propertyOp, + ps->flags, Shape::HAS_SHORTID, ps->tinyid); + } else { // If you have self-hosted getter/setter, you can't have a // native one. - JS_ASSERT(!ps->getter.op && !ps->setter.op); + JS_ASSERT(!ps->getter.propertyOp.op && !ps->setter.propertyOp.op); + JS_ASSERT(ps->flags & JSPROP_GETTER); /* * During creation of the self-hosting global, we ignore all * self-hosted properties, as that means we're currently setting up @@ -3304,18 +3317,10 @@ JS_DefineProperties(JSContext *cx, JSObject *objArg, const JSPropertySpec *ps) continue; ok = DefineSelfHostedProperty(cx, obj, ps->name, - ps->selfHostedGetter, - ps->selfHostedSetter, + ps->getter.selfHosted.funname, + ps->setter.selfHosted.funname, ps->flags, Shape::HAS_SHORTID, ps->tinyid); - } else { - // If you do not have a self-hosted getter, you should - // have a native getter; and you should not have a - // self-hosted setter. - JS_ASSERT(ps->getter.op && !ps->selfHostedSetter); - - ok = DefineProperty(cx, obj, ps->name, UndefinedValue(), ps->getter, ps->setter, - ps->flags, Shape::HAS_SHORTID, ps->tinyid); } if (!ok) break; diff --git a/js/src/jsapi.h b/js/src/jsapi.h index e9d058517fc..0173cea004d 100644 --- a/js/src/jsapi.h +++ b/js/src/jsapi.h @@ -2390,7 +2390,7 @@ typedef struct JSNativeWrapper { * Macro static initializers which make it easy to pass no JSJitInfo as part of a * JSPropertySpec or JSFunctionSpec. */ -#define JSOP_WRAPPER(op) {op, nullptr} +#define JSOP_WRAPPER(op) { {op, nullptr} } #define JSOP_NULLWRAPPER JSOP_WRAPPER(nullptr) /* @@ -2399,13 +2399,30 @@ typedef struct JSNativeWrapper { * JSPROP_INDEX bit in flags. */ struct JSPropertySpec { + struct SelfHostedWrapper { + void *unused; + const char *funname; + }; + const char *name; int8_t tinyid; uint8_t flags; - JSPropertyOpWrapper getter; - JSStrictPropertyOpWrapper setter; - const char *selfHostedGetter; - const char *selfHostedSetter; + union { + JSPropertyOpWrapper propertyOp; + SelfHostedWrapper selfHosted; + } getter; + union { + JSStrictPropertyOpWrapper propertyOp; + SelfHostedWrapper selfHosted; + } setter; + +private: + void StaticAsserts() { + JS_STATIC_ASSERT(sizeof(SelfHostedWrapper) == sizeof(JSPropertyOpWrapper)); + JS_STATIC_ASSERT(sizeof(SelfHostedWrapper) == sizeof(JSStrictPropertyOpWrapper)); + JS_STATIC_ASSERT(offsetof(SelfHostedWrapper, funname) == + offsetof(JSPropertyOpWrapper, info)); + } }; namespace JS { @@ -2414,6 +2431,11 @@ namespace detail { /* NEVER DEFINED, DON'T USE. For use by JS_CAST_NATIVE_TO only. */ inline int CheckIsNative(JSNative native); +/* NEVER DEFINED, DON'T USE. For use by JS_CAST_STRING_TO only. */ +template +inline int +CheckIsCharacterLiteral(const char (&arr)[N]); + } // namespace detail } // namespace JS @@ -2421,6 +2443,10 @@ inline int CheckIsNative(JSNative native); (static_cast(sizeof(JS::detail::CheckIsNative(v))), \ reinterpret_cast(v)) +#define JS_CAST_STRING_TO(s, To) \ + (static_cast(sizeof(JS::detail::CheckIsCharacterLiteral(s))), \ + reinterpret_cast(s)) + #define JS_CHECK_ACCESSOR_FLAGS(flags) \ (static_cast::Type>(0), \ (flags)) @@ -2436,23 +2462,23 @@ inline int CheckIsNative(JSNative native); {name, 0, \ uint8_t(JS_CHECK_ACCESSOR_FLAGS(flags) | JSPROP_SHARED | JSPROP_NATIVE_ACCESSORS), \ JSOP_WRAPPER(JS_CAST_NATIVE_TO(getter, JSPropertyOp)), \ - JSOP_NULLWRAPPER, nullptr, nullptr} + JSOP_NULLWRAPPER} #define JS_PSGS(name, getter, setter, flags) \ {name, 0, \ uint8_t(JS_CHECK_ACCESSOR_FLAGS(flags) | JSPROP_SHARED | JSPROP_NATIVE_ACCESSORS), \ JSOP_WRAPPER(JS_CAST_NATIVE_TO(getter, JSPropertyOp)), \ - JSOP_WRAPPER(JS_CAST_NATIVE_TO(setter, JSStrictPropertyOp)), \ - nullptr, nullptr} + JSOP_WRAPPER(JS_CAST_NATIVE_TO(setter, JSStrictPropertyOp))} #define JS_SELF_HOSTED_GET(name, getterName, flags) \ {name, 0, \ uint8_t(JS_CHECK_ACCESSOR_FLAGS(flags) | JSPROP_SHARED | JSPROP_GETTER), \ - JSOP_NULLWRAPPER, JSOP_NULLWRAPPER, getterName, nullptr} + { nullptr, JS_CAST_STRING_TO(getterName, const JSJitInfo *) }, \ + JSOP_NULLWRAPPER } #define JS_SELF_HOSTED_GETSET(name, getterName, setterName, flags) \ {name, 0, \ uint8_t(JS_CHECK_ACCESSOR_FLAGS(flags) | JSPROP_SHARED | JSPROP_GETTER | JSPROP_SETTER), \ - JSOP_NULLWRAPPER, JSOP_NULLWRAPPER, getterName, setterName} -#define JS_PS_END {0, 0, 0, JSOP_NULLWRAPPER, JSOP_NULLWRAPPER, \ - nullptr, nullptr} + { nullptr, JS_CAST_STRING_TO(getterName, const JSJitInfo *) }, \ + { nullptr, JS_CAST_STRING_TO(setterName, const JSJitInfo *) } } +#define JS_PS_END {0, 0, 0, JSOP_NULLWRAPPER, JSOP_NULLWRAPPER } /* * To define a native function, set call to a JSNativeWrapper. To define a From 0e40855e2bfe126f17f6ef713c9eef0d9bef0f75 Mon Sep 17 00:00:00 2001 From: Patrick McManus Date: Mon, 13 Jan 2014 10:10:10 -0500 Subject: [PATCH 07/19] bug 959172 - double SpdySession::CleanupStream r=hurley --- netwerk/protocol/http/Http2Session.cpp | 5 ++++- netwerk/protocol/http/SpdySession3.cpp | 5 ++++- netwerk/protocol/http/SpdySession31.cpp | 5 ++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/netwerk/protocol/http/Http2Session.cpp b/netwerk/protocol/http/Http2Session.cpp index 7183e4216a5..b0617b7e8ee 100644 --- a/netwerk/protocol/http/Http2Session.cpp +++ b/netwerk/protocol/http/Http2Session.cpp @@ -896,7 +896,10 @@ Http2Session::CleanupStream(Http2Stream *aStream, nsresult aResult, { MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread); LOG3(("Http2Session::CleanupStream %p %p 0x%X %X\n", - this, aStream, aStream->StreamID(), aResult)); + this, aStream, aStream ? aStream->StreamID() : 0, aResult)); + if (!aStream) { + return; + } Http2PushedStream *pushSource = nullptr; diff --git a/netwerk/protocol/http/SpdySession3.cpp b/netwerk/protocol/http/SpdySession3.cpp index 291e229c992..ebcab0fe08c 100644 --- a/netwerk/protocol/http/SpdySession3.cpp +++ b/netwerk/protocol/http/SpdySession3.cpp @@ -837,7 +837,10 @@ SpdySession3::CleanupStream(SpdyStream3 *aStream, nsresult aResult, { MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread); LOG3(("SpdySession3::CleanupStream %p %p 0x%X %X\n", - this, aStream, aStream->StreamID(), aResult)); + this, aStream, aStream ? aStream->StreamID() : 0, aResult)); + if (!aStream) { + return; + } SpdyPushedStream3 *pushSource = nullptr; diff --git a/netwerk/protocol/http/SpdySession31.cpp b/netwerk/protocol/http/SpdySession31.cpp index 9240d8c1d3e..0943145e2d2 100644 --- a/netwerk/protocol/http/SpdySession31.cpp +++ b/netwerk/protocol/http/SpdySession31.cpp @@ -874,7 +874,10 @@ SpdySession31::CleanupStream(SpdyStream31 *aStream, nsresult aResult, { MOZ_ASSERT(PR_GetCurrentThread() == gSocketThread); LOG3(("SpdySession31::CleanupStream %p %p 0x%X %X\n", - this, aStream, aStream->StreamID(), aResult)); + this, aStream, aStream ? aStream->StreamID() : 0, aResult)); + if (!aStream) { + return; + } SpdyPushedStream31 *pushSource = nullptr; From 9b878ee359448b829821d32850130063a1eb4ab3 Mon Sep 17 00:00:00 2001 From: Patrick McManus Date: Thu, 5 Dec 2013 11:25:43 -0500 Subject: [PATCH 08/19] bug 266532 - addons with broken OnDataAvailable contract break http channel progress offsets (reland) r=jduell --- netwerk/protocol/http/nsHttpChannel.cpp | 33 +++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/netwerk/protocol/http/nsHttpChannel.cpp b/netwerk/protocol/http/nsHttpChannel.cpp index dc977ae1334..67e5e31731c 100644 --- a/netwerk/protocol/http/nsHttpChannel.cpp +++ b/netwerk/protocol/http/nsHttpChannel.cpp @@ -5296,13 +5296,42 @@ nsHttpChannel::OnDataAvailable(nsIRequest *request, nsISupports *ctxt, if (!mLogicalOffset) MOZ_EVENT_TRACER_EXEC(this, "net::http::channel"); + int64_t offsetBefore = 0; + nsCOMPtr seekable = do_QueryInterface(input); + if (seekable && NS_FAILED(seekable->Tell(&offsetBefore))) { + seekable = nullptr; + } + nsresult rv = mListener->OnDataAvailable(this, mListenerContext, input, mLogicalOffset, count); - if (NS_SUCCEEDED(rv)) - mLogicalOffset = progress; + if (NS_SUCCEEDED(rv)) { + // by contract mListener must read all of "count" bytes, but + // nsInputStreamPump is tolerant to seekable streams that violate that + // and it will redeliver incompletely read data. So we need to do + // the same thing when updating the progress counter to stay in sync. + int64_t offsetAfter, delta; + if (seekable && NS_SUCCEEDED(seekable->Tell(&offsetAfter))) { + delta = offsetAfter - offsetBefore; + if (delta != count) { + count = delta; + + NS_WARNING("Listener OnDataAvailable contract violation"); + nsCOMPtr consoleService = + do_GetService(NS_CONSOLESERVICE_CONTRACTID); + nsAutoString message + (NS_LITERAL_STRING( + "http channel Listener OnDataAvailable contract violation")); + if (consoleService) { + consoleService->LogStringMessage(message.get()); + } + } + } + mLogicalOffset += count; + } + return rv; } From ed93d3fdf2669c17c4e8b322a4b25bdb54deafc9 Mon Sep 17 00:00:00 2001 From: Steven Michaud Date: Mon, 13 Jan 2014 16:01:52 -0600 Subject: [PATCH 09/19] Bug 722676 - View menu item stays selected when returning from opened window. r=josh --- widget/cocoa/nsMenuBarX.h | 23 ++++++- widget/cocoa/nsMenuBarX.mm | 123 ++++++++++++++++++++++++++++++++++--- 2 files changed, 135 insertions(+), 11 deletions(-) diff --git a/widget/cocoa/nsMenuBarX.h b/widget/cocoa/nsMenuBarX.h index c482b646988..f1563f3023b 100644 --- a/widget/cocoa/nsMenuBarX.h +++ b/widget/cocoa/nsMenuBarX.h @@ -16,6 +16,7 @@ #include "nsString.h" class nsMenuX; +class nsMenuBarX; class nsMenuItemX; class nsIWidget; class nsIContent; @@ -32,11 +33,26 @@ public: NS_IMETHOD CreateNativeMenuBar(nsIWidget* aParent, nsIContent* aMenuBarNode); }; +@interface NSMenu (Undocumented) +// Undocumented method, present unchanged since OS X 10.6, used to temporarily +// highlight a top-level menu item when an appropriate Cmd+key combination is +// pressed. +- (void)_performActionWithHighlightingForItemAtIndex:(NSInteger)index; +@end + // Objective-C class used to allow us to intervene with keyboard event handling. // We allow mouse actions to work normally. @interface GeckoNSMenu : NSMenu { +@private + nsMenuBarX *mMenuBarOwner; // Weak -- if non-null it owns us + bool mDelayResignMainMenu; } +- (id)initWithTitle:(NSString *)aTitle andMenuBarOwner:(nsMenuBarX *)aMenuBarOwner; +- (void)resetMenuBarOwner; +- (bool)delayResignMainMenu; +- (void)setDelayResignMainMenu:(bool)aShouldDelay; +- (void)delayedPaintMenuBar:(id)unused; @end // Objective-C class used as action target for menu items @@ -80,6 +96,7 @@ public: static NativeMenuItemTarget* sNativeEventTarget; static nsMenuBarX* sLastGeckoMenuBarPainted; + static nsMenuBarX* sCurrentPaintDelayedMenuBar; // The following content nodes have been removed from the menu system. // We save them here for use in command handling. @@ -103,7 +120,9 @@ public: nsMenuX* GetMenuAt(uint32_t aIndex); nsMenuX* GetXULHelpMenu(); void SetSystemHelpMenu(); - nsresult Paint(); + nsresult Paint(bool aDelayed = false); + void PaintMenuBarAfterDelay(); + void ResetAwaitingDelayedPaint() { mAwaitingDelayedPaint = false; } void ForceUpdateNativeMenuAt(const nsAString& indexString); void ForceNativeMenuReload(); // used for testing static char GetLocalizedAccelKey(const char *shortcutID); @@ -121,6 +140,8 @@ protected: nsTArray< nsAutoPtr > mMenuArray; nsIWidget* mParentWindow; // [weak] GeckoNSMenu* mNativeMenu; // root menu, representing entire menu bar + + bool mAwaitingDelayedPaint; }; #endif // nsMenuBarX_h_ diff --git a/widget/cocoa/nsMenuBarX.mm b/widget/cocoa/nsMenuBarX.mm index 250448587f1..eb9330d2f61 100644 --- a/widget/cocoa/nsMenuBarX.mm +++ b/widget/cocoa/nsMenuBarX.mm @@ -28,7 +28,8 @@ #include "nsIDOMElement.h" NativeMenuItemTarget* nsMenuBarX::sNativeEventTarget = nil; -nsMenuBarX* nsMenuBarX::sLastGeckoMenuBarPainted = nullptr; +nsMenuBarX* nsMenuBarX::sLastGeckoMenuBarPainted = nullptr; // Weak +nsMenuBarX* nsMenuBarX::sCurrentPaintDelayedMenuBar = nullptr; // Weak NSMenu* sApplicationMenu = nil; BOOL gSomeMenuBarPainted = NO; @@ -55,11 +56,11 @@ NS_IMETHODIMP nsNativeMenuServiceX::CreateNativeMenuBar(nsIWidget* aParent, nsIC } nsMenuBarX::nsMenuBarX() -: nsMenuGroupOwnerX(), mParentWindow(nullptr) +: nsMenuGroupOwnerX(), mParentWindow(nullptr), mAwaitingDelayedPaint(false) { NS_OBJC_BEGIN_TRY_ABORT_BLOCK; - mNativeMenu = [[GeckoNSMenu alloc] initWithTitle:@"MainMenuBar"]; + mNativeMenu = [[GeckoNSMenu alloc] initWithTitle:@"MainMenuBar" andMenuBarOwner:this]; NS_OBJC_END_TRY_ABORT_BLOCK; } @@ -91,6 +92,7 @@ nsMenuBarX::~nsMenuBarX() // before the registration hash table is destroyed. mMenuArray.Clear(); + [mNativeMenu resetMenuBarOwner]; [mNativeMenu release]; NS_OBJC_END_TRY_ABORT_BLOCK; @@ -339,10 +341,15 @@ void nsMenuBarX::SetSystemHelpMenu() } } -nsresult nsMenuBarX::Paint() +nsresult nsMenuBarX::Paint(bool aDelayed) { NS_OBJC_BEGIN_TRY_ABORT_BLOCK_NSRESULT; + if (!aDelayed && mAwaitingDelayedPaint) { + return NS_OK; + } + mAwaitingDelayedPaint = false; + // Don't try to optimize anything in this painting by checking // sLastGeckoMenuBarPainted because the menubar can be manipulated by // native dialogs and sheet code and other things besides this paint method. @@ -352,13 +359,36 @@ nsresult nsMenuBarX::Paint() NSMenu* outgoingMenu = [NSApp mainMenu]; NS_ASSERTION([outgoingMenu numberOfItems] > 0, "Main menu does not have any items, something is terribly wrong!"); - NSMenuItem* appMenuItem = [[outgoingMenu itemAtIndex:0] retain]; - [outgoingMenu removeItemAtIndex:0]; - [mNativeMenu insertItem:appMenuItem atIndex:0]; - [appMenuItem release]; + // To work around bug 722676, we sometimes need to delay making mNativeMenu + // the main menu. This is an Apple bug that sometimes causes a top-level + // menu item to remain highlighted after pressing a Cmd+key combination that + // opens a new window, then closing the window. The OS temporarily + // highlights the appropriate top-level menu item whenever you press the + // Cmd+key combination for one of its submenus. (It does this by setting a + // "pressed" attribute on it.) The OS then uses a timer to remove this + // "pressed" attribute. But without our workaround we sometimes change the + // main menu before the timer has fired, so when it fires the menu item it + // was intended to unhighlight is no longer present in the main menu. This + // causes the item to remain semi-permanently highlighted (until you quit + // Firefox or navigate the main menu by hand). + if ((outgoingMenu != mNativeMenu) && + [outgoingMenu isKindOfClass:[GeckoNSMenu class]]) { + if (aDelayed) { + [(GeckoNSMenu *)outgoingMenu setDelayResignMainMenu:false]; + } else if ([(GeckoNSMenu *)outgoingMenu delayResignMainMenu]) { + PaintMenuBarAfterDelay(); + return NS_OK; + } + } - // Set menu bar and event target. - [NSApp setMainMenu:mNativeMenu]; + if (outgoingMenu != mNativeMenu) { + NSMenuItem* appMenuItem = [[outgoingMenu itemAtIndex:0] retain]; + [outgoingMenu removeItemAtIndex:0]; + [mNativeMenu insertItem:appMenuItem atIndex:0]; + [appMenuItem release]; + // Set menu bar and event target. + [NSApp setMainMenu:mNativeMenu]; + } SetSystemHelpMenu(); nsMenuBarX::sLastGeckoMenuBarPainted = this; @@ -369,6 +399,19 @@ nsresult nsMenuBarX::Paint() NS_OBJC_END_TRY_ABORT_BLOCK_NSRESULT; } +// Used to delay a call to nsMenuBarX::Paint(). Needed to work around +// bug 722676. +void nsMenuBarX::PaintMenuBarAfterDelay() +{ + mAwaitingDelayedPaint = true; + nsMenuBarX::sCurrentPaintDelayedMenuBar = this; + [mNativeMenu retain]; + // The delay for Apple's unhighlight timer is 0.1f, so we make ours a bit longer. + [mNativeMenu performSelector:@selector(delayedPaintMenuBar:) + withObject:nil + afterDelay:0.15f]; +} + // Returns the 'key' attribute of the 'shortcutID' object (if any) in the // currently active menubar's DOM document. 'shortcutID' should be the id // (i.e. the name) of a component that defines a commonly used (and @@ -727,6 +770,66 @@ static BOOL gMenuItemsExecuteCommands = YES; @implementation GeckoNSMenu +- (id)initWithTitle:(NSString *)aTitle +{ + if (self = [super initWithTitle:aTitle]) { + mMenuBarOwner = nullptr; + mDelayResignMainMenu = false; + } + return self; +} + +- (id)initWithTitle:(NSString *)aTitle andMenuBarOwner:(nsMenuBarX *)aMenuBarOwner +{ + if (self = [super initWithTitle:aTitle]) { + mMenuBarOwner = aMenuBarOwner; + mDelayResignMainMenu = false; + } + return self; +} + +- (void)resetMenuBarOwner +{ + mMenuBarOwner = nil; +} + +- (bool)delayResignMainMenu +{ + return mDelayResignMainMenu; +} + +- (void)setDelayResignMainMenu:(bool)aShouldDelay +{ + mDelayResignMainMenu = aShouldDelay; +} + +// Used to delay a call to nsMenuBarX::Paint(). Needed to work around +// bug 722676. +- (void)delayedPaintMenuBar:(id)unused +{ + if (mMenuBarOwner) { + if (mMenuBarOwner == nsMenuBarX::sCurrentPaintDelayedMenuBar) { + mMenuBarOwner->Paint(true); + nsMenuBarX::sCurrentPaintDelayedMenuBar = nullptr; + } else { + mMenuBarOwner->ResetAwaitingDelayedPaint(); + } + } + [self release]; +} + +// Undocumented method, present unchanged since OS X 10.6, used to temporarily +// highlight a top-level menu item when an appropriate Cmd+key combination is +// pressed. +- (void)_performActionWithHighlightingForItemAtIndex:(NSInteger)index; +{ + NSMenu *mainMenu = [NSApp mainMenu]; + if ([mainMenu isKindOfClass:[GeckoNSMenu class]]) { + [(GeckoNSMenu *)mainMenu setDelayResignMainMenu:true]; + } + [super _performActionWithHighlightingForItemAtIndex:index]; +} + // Keyboard commands should not cause menu items to invoke their // commands when there is a key window because we'd rather send // the keyboard command to the window. We still have the menus From a2fe974531bad82241d344255c3050856e9efac1 Mon Sep 17 00:00:00 2001 From: Mike Hommey Date: Tue, 14 Jan 2014 07:31:30 +0900 Subject: [PATCH 10/19] Bug 957919 - Remove config/asencode.cpp. r=ted --- config/asencode.cpp | 194 -------------------------------------------- 1 file changed, 194 deletions(-) delete mode 100644 config/asencode.cpp diff --git a/config/asencode.cpp b/config/asencode.cpp deleted file mode 100644 index 1478a60a92f..00000000000 --- a/config/asencode.cpp +++ /dev/null @@ -1,194 +0,0 @@ -/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ -/* This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ - -/* - * To compile, do: - * - * gcc -framework ApplicationServices -l stdc++ -o asencode asencode.cpp - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -typedef struct ASFinderInfo -{ - FInfo ioFlFndrInfo; /* PBGetFileInfo() or PBGetCatInfo() */ - FXInfo ioFlXFndrInfo; /* PBGetCatInfo() (HFS only) */ -} ASFinderInfo; /* ASFinderInfo */ - -#define EXIT_IF_FALSE(x) \ - do { \ - if (!(x)) { \ - printf("Assertion failure: %s\n" \ - " at %s line %d\n", \ - #x, __FILE__, __LINE__); \ - exit(1); \ - } \ - } while (0) - -// encodes a file with data and resource forks into a single -// AppleSingle encoded file.. - -static void append_file(FILE* output, const char* input_name) -{ - FILE* input = fopen(input_name, "rb"); - EXIT_IF_FALSE(input != nullptr); - - while (1) { - char buffer[4096]; - size_t amount = fread(buffer, 1, sizeof(buffer), input); - if (amount == 0) { - EXIT_IF_FALSE(feof(input) != 0); - break; - } - fwrite(buffer, 1, amount, output); - } - fclose(input); -} - -int main(int argc, char** argv) -{ - if (argc < 3) { - printf("usage: %s input output\n", argv[0]); - exit(1); - } - - const char *input_name = argv[1]; - - struct stat input_st; - if (stat(input_name, &input_st) != 0) { - printf("%s: can't open file `%s'\n", argv[0], input_name); - exit(2); - } - - if ((input_st.st_mode & S_IFMT) != S_IFREG) { - printf("%s: file `%s' not a regular file\n", argv[0], input_name); - exit(3); - } - - char rez_name[512]; - strcpy(rez_name, input_name); - strcat(rez_name, "/rsrc"); - - struct stat rez_st; - EXIT_IF_FALSE(stat(rez_name, &rez_st) == 0); - - if (rez_st.st_size == 0) { - printf("%s: no resource fork found on file `%s'\n", argv[0], argv[1]); - exit(4); - } - - FILE* output = fopen(argv[2], "wb"); - if (output == nullptr) { - printf("%s: can't open file `%s'\n", argv[0], argv[2]); - exit(5); - } - - struct header { - int magic_number; - int version_number; - char filler[16]; - } header; - - header.magic_number = 0x00051600; - header.version_number = 0x00020000; - - EXIT_IF_FALSE(fwrite(&header, sizeof(header), 1, output) == 1); - - short entry_count = 5; - EXIT_IF_FALSE(fwrite(&entry_count, sizeof(entry_count), 1, output) == 1); - - struct entry { - unsigned int id; - unsigned int offset; - unsigned int length; - }; - - struct dates - { - int create; /* file creation date/time */ - int modify; /* last modification date/time */ - int backup; /* last backup date/time */ - int access; /* last access date/time */ - } dates; - - char *name_buf = strdup(input_name); - char *orig_name = basename(name_buf); - int orig_name_len = strlen(orig_name); - - entry entries[entry_count]; - - int header_end = sizeof(header) + sizeof(entry_count) + sizeof(entries); - - entries[0].id = 1; // data fork - entries[0].offset = header_end; - entries[0].length = input_st.st_size; - - entries[1].id = 2; // data fork - entries[1].offset = entries[0].offset + entries[0].length; - entries[1].length = rez_st.st_size; - - entries[2].id = 3; // file name - entries[2].offset = entries[1].offset + entries[1].length; - entries[2].length = orig_name_len; - - entries[3].id = 8; // file dates - entries[3].offset = entries[2].offset + entries[2].length; - entries[3].length = sizeof(dates); - - entries[4].id = 9; // finder info - entries[4].offset = entries[3].offset + entries[3].length; - entries[4].length = sizeof(ASFinderInfo); - - EXIT_IF_FALSE(fwrite(entries, sizeof(entry), entry_count, output) == - entry_count); - - append_file(output, input_name); - append_file(output, rez_name); - - EXIT_IF_FALSE(fwrite(orig_name, 1, orig_name_len, output) == orig_name_len); - - // Dates in an AppleSingle encoded file should be the number of - // seconds since (or to) 00:00:00, January 1, 2000 UTC -#define Y2K_SECONDS (946710000U) - - dates.create = input_st.st_ctime - Y2K_SECONDS; - dates.modify = input_st.st_mtime - Y2K_SECONDS; - dates.backup = 0x80000000; // earliest possible time - dates.access = input_st.st_atime - Y2K_SECONDS; - - EXIT_IF_FALSE(fwrite(&dates, 1, sizeof(dates), output) == sizeof(dates)); - - char abs_input_name[PATH_MAX]; - EXIT_IF_FALSE(realpath(input_name, abs_input_name) == abs_input_name); - - FSRef fsref; - EXIT_IF_FALSE(FSPathMakeRef((unsigned char *)abs_input_name, &fsref, 0) == 0); - - FSCatalogInfo cat_info; - memset(&cat_info, 0, sizeof(cat_info)); - EXIT_IF_FALSE(FSGetCatalogInfo(&fsref, - kFSCatInfoGettableInfo, - &cat_info, nullptr, nullptr, nullptr) == 0); - - ASFinderInfo finder_info; - memcpy(&finder_info.ioFlFndrInfo, &cat_info.finderInfo, - sizeof(finder_info.ioFlFndrInfo)); - memcpy(&finder_info.ioFlXFndrInfo, &cat_info.extFinderInfo, - sizeof(finder_info.ioFlXFndrInfo)); - - EXIT_IF_FALSE(fwrite(&finder_info, 1, sizeof(finder_info), output) == - sizeof(finder_info)); - - fclose(output); - - return 0; -} From 8e811db3210de9c2574e9b9d4ed07f1e4109f376 Mon Sep 17 00:00:00 2001 From: Mike Hommey Date: Tue, 14 Jan 2014 07:32:12 +0900 Subject: [PATCH 11/19] Bug 956597 - Package mozwebidlcodegen and gyp in the js source archive. r=gps --- js/src/make-source-package.sh | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/js/src/make-source-package.sh b/js/src/make-source-package.sh index 2d3108ba94e..4d7152b4377 100755 --- a/js/src/make-source-package.sh +++ b/js/src/make-source-package.sh @@ -64,6 +64,16 @@ case $cmd in cp -t ${tgtpath}/js/src -dRp \ ${SRCDIR}/../../python fi + if [ ! -e ${SRCDIR}/dom/bindings/mozwebidlcodegen ]; then + ${MKDIR} -p ${tgtpath}/js/src/dom/bindings + cp -t ${tgtpath}/js/src/dom/bindings -dRp \ + ${SRCDIR}/../../dom/bindings/mozwebidlcodegen + fi + if [ ! -e ${SRCDIR}/media/webrtc/trunk/tools/gyp ]; then + ${MKDIR} -p ${tgtpath}/js/src/media/webrtc/trunk/tools + cp -t ${tgtpath}/js/src/media/webrtc/trunk/tools -dRp \ + ${SRCDIR}/../../media/webrtc/trunk/tools/gyp + fi if [ ! -e ${SRCDIR}/testing ]; then ${MKDIR} -p ${tgtpath}/js/src/testing cp -t ${tgtpath}/js/src/testing -dRp \ From 925edbca14d015473d59879836d344cd2e8dd4a3 Mon Sep 17 00:00:00 2001 From: Mike Hommey Date: Tue, 14 Jan 2014 07:38:40 +0900 Subject: [PATCH 12/19] Bug 950298 - Make the js build system use top-level as its root objdir. r=gps --- CLOBBER | 2 +- Makefile.in | 55 +- client.mk | 23 +- config/Makefile.in | 14 +- config/baseconfig.mk | 13 +- config/config.mk | 2 +- config/moz.build | 2 - config/rules.mk | 10 +- config/static-checking-config.mk | 11 +- js/src/Makefile.in | 53 +- js/src/aclocal.m4 | 9 + js/src/build/check-sync-exceptions | 1 - js/src/build/msys-perl-wrapper | 20 - js/src/build/qemu-wrap | 24 - js/src/build/subconfigure.py | 124 -- js/src/build/unix/add_phony_targets.py | 33 - js/src/build/unix/headers/bits/c++config.h | 2 - js/src/build/unix/print-failed-commands.sh | 25 - js/src/build/unix/uniq.pl | 91 - js/src/build/win32/pgomerge.py | 44 - js/src/config/Makefile.in | 47 - js/src/config/Moz/Milestone.pm | 220 --- js/src/config/autoconf.mk.in | 6 - js/src/config/baseconfig.mk | 42 - js/src/config/check-sync-dirs.py | 108 -- js/src/config/check-sync-exceptions | 27 - js/src/config/check_source_count.py | 57 - js/src/config/check_spidermonkey_style.py | 588 ------ js/src/config/check_vanilla_allocations.py | 159 -- js/src/config/config.mk | 910 --------- js/src/config/emptyvars.mk.in | 1 - js/src/config/expandlibs.py | 145 -- js/src/config/expandlibs_config.py | 27 - js/src/config/expandlibs_exec.py | 361 ---- js/src/config/expandlibs_gen.py | 50 - js/src/config/find_OOM_errors.py | 352 ---- js/src/config/gcc_hidden.h | 6 - js/src/config/make-system-wrappers.pl | 26 - js/src/config/makefiles/autotargets.mk | 94 - js/src/config/makefiles/debugmake.mk | 121 -- js/src/config/makefiles/functions.mk | 34 - js/src/config/makefiles/java-build.mk | 113 -- js/src/config/makefiles/makeutils.mk | 121 -- js/src/config/makefiles/mochitest.mk | 52 - js/src/config/makefiles/nonrecursive.mk | 68 - js/src/config/makefiles/rcs.mk | 54 - js/src/config/makefiles/target_binaries.mk | 122 -- js/src/config/milestone.pl | 94 - js/src/config/milestone.txt | 13 - js/src/config/moz.build | 29 - js/src/config/nsinstall.c | 452 ----- js/src/config/nsinstall.py | 180 -- js/src/config/pathsub.c | 215 --- js/src/config/pathsub.h | 42 - js/src/config/pythonpath.py | 56 - js/src/config/rebuild_check.py | 44 - js/src/config/recurse.mk | 243 --- js/src/config/rules.mk | 1703 ----------------- js/src/config/solaris_ia32.map | 5 - js/src/config/static-checking-config.mk | 36 - js/src/config/static-checking.js | 147 -- js/src/config/string-format.js | 65 - js/src/config/system-headers | 1147 ----------- js/src/config/version.mk | 51 - js/src/config/version_win.pl | 374 ---- js/src/configure.in | 38 +- js/src/gdb/Makefile.in | 6 +- js/src/jsapi-tests/Makefile.in | 6 +- js/src/make-source-package.sh | 49 +- js/src/moz.build | 2 - js/src/shell/Makefile.in | 10 +- moz.build | 44 +- .../mozbuild/backend/recursivemake.py | 3 +- testing/testsuite-targets.mk | 2 +- toolkit/mozapps/installer/packager.mk | 5 +- 75 files changed, 201 insertions(+), 9329 deletions(-) delete mode 100644 js/src/build/check-sync-exceptions delete mode 100644 js/src/build/msys-perl-wrapper delete mode 100755 js/src/build/qemu-wrap delete mode 100644 js/src/build/subconfigure.py delete mode 100644 js/src/build/unix/add_phony_targets.py delete mode 100644 js/src/build/unix/headers/bits/c++config.h delete mode 100755 js/src/build/unix/print-failed-commands.sh delete mode 100644 js/src/build/unix/uniq.pl delete mode 100644 js/src/build/win32/pgomerge.py delete mode 100644 js/src/config/Makefile.in delete mode 100644 js/src/config/Moz/Milestone.pm delete mode 100644 js/src/config/autoconf.mk.in delete mode 100644 js/src/config/baseconfig.mk delete mode 100644 js/src/config/check-sync-dirs.py delete mode 100644 js/src/config/check-sync-exceptions delete mode 100755 js/src/config/check_source_count.py delete mode 100644 js/src/config/check_spidermonkey_style.py delete mode 100644 js/src/config/check_vanilla_allocations.py delete mode 100644 js/src/config/config.mk delete mode 100644 js/src/config/emptyvars.mk.in delete mode 100644 js/src/config/expandlibs.py delete mode 100644 js/src/config/expandlibs_config.py delete mode 100644 js/src/config/expandlibs_exec.py delete mode 100644 js/src/config/expandlibs_gen.py delete mode 100644 js/src/config/find_OOM_errors.py delete mode 100644 js/src/config/gcc_hidden.h delete mode 100644 js/src/config/make-system-wrappers.pl delete mode 100644 js/src/config/makefiles/autotargets.mk delete mode 100644 js/src/config/makefiles/debugmake.mk delete mode 100644 js/src/config/makefiles/functions.mk delete mode 100644 js/src/config/makefiles/java-build.mk delete mode 100644 js/src/config/makefiles/makeutils.mk delete mode 100644 js/src/config/makefiles/mochitest.mk delete mode 100644 js/src/config/makefiles/nonrecursive.mk delete mode 100644 js/src/config/makefiles/rcs.mk delete mode 100644 js/src/config/makefiles/target_binaries.mk delete mode 100644 js/src/config/milestone.pl delete mode 100644 js/src/config/milestone.txt delete mode 100644 js/src/config/moz.build delete mode 100644 js/src/config/nsinstall.c delete mode 100644 js/src/config/nsinstall.py delete mode 100644 js/src/config/pathsub.c delete mode 100644 js/src/config/pathsub.h delete mode 100644 js/src/config/pythonpath.py delete mode 100644 js/src/config/rebuild_check.py delete mode 100644 js/src/config/recurse.mk delete mode 100644 js/src/config/rules.mk delete mode 100644 js/src/config/solaris_ia32.map delete mode 100644 js/src/config/static-checking-config.mk delete mode 100644 js/src/config/static-checking.js delete mode 100644 js/src/config/string-format.js delete mode 100644 js/src/config/system-headers delete mode 100644 js/src/config/version.mk delete mode 100755 js/src/config/version_win.pl diff --git a/CLOBBER b/CLOBBER index c8f09ad5dfd..f077bd15c03 100644 --- a/CLOBBER +++ b/CLOBBER @@ -22,4 +22,4 @@ # changes to stick? As of bug 928195, this shouldn't be necessary! Please # don't change CLOBBER for WebIDL changes any more. -Bug 958185 requires clobber on Android to force a Proguard refresh +Bug 950298 requires clobber because it changes where nsinstall is picked and it was previously installed there with wrong permissions. Also, the directory where js is built changed. diff --git a/Makefile.in b/Makefile.in index 731209a184e..ae4e161a856 100644 --- a/Makefile.in +++ b/Makefile.in @@ -17,15 +17,19 @@ export TOPLEVEL_BUILD := 1 default:: +ifdef MOZ_BUILD_APP include $(topsrcdir)/$(MOZ_BUILD_APP)/build.mk +endif include $(topsrcdir)/config/config.mk ifndef LIBXUL_SDK ifdef COMPILE_ENVIRONMENT +ifndef BUILDING_JS BUILD_JS = 1 endif endif +endif GARBAGE_DIRS += dist _javagen _profile staticlib DIST_GARBAGE = config.cache config.log config.status* config-defs.h \ @@ -34,29 +38,40 @@ DIST_GARBAGE = config.cache config.log config.status* config-defs.h \ netwerk/necko-config.h xpcom/xpcom-config.h xpcom/xpcom-private.h \ .mozconfig.mk +ifdef BUILDING_JS +configure_dir = $(topsrcdir)/js/src +else +configure_dir = $(topsrcdir) +endif + ifndef MOZ_PROFILE_USE # We need to explicitly put backend.RecursiveMakeBackend here # otherwise the rule in rules.mk doesn't run early enough. -libs binaries export tools:: CLOBBER $(topsrcdir)/configure config.status backend.RecursiveMakeBackend +libs binaries export tools:: CLOBBER $(configure_dir)/configure config.status backend.RecursiveMakeBackend ifdef BUILD_JS libs binaries export tools:: js-config-status endif endif +ifdef BUILDING_JS +.PHONY: CLOBBER +CLOBBER: +else CLOBBER: $(topsrcdir)/CLOBBER @echo 'STOP! The CLOBBER file has changed.' @echo 'Please run the build through a sanctioned build wrapper, such as' @echo '"mach build" or client.mk.' @exit 1 +endif -$(topsrcdir)/configure: $(topsrcdir)/configure.in +$(configure_dir)/configure: $(configure_dir)/configure.in @echo 'STOP! configure.in has changed, and your configure is out of date.' @echo 'Please rerun autoconf and re-configure your build directory.' @echo 'To ignore this message, touch "configure" in the source directory,' @echo 'but your build might not succeed.' @exit 1 -config.status: $(topsrcdir)/configure +config.status: $(configure_dir)/configure @echo 'STOP! configure has changed and needs to be run in this build directory.' @echo 'Please rerun configure.' @echo 'To ignore this message, touch "config.status" in the build directory,' @@ -90,7 +105,7 @@ endif install_manifests := bin idl include public private sdk install_manifest_depends = \ CLOBBER \ - $(topsrcdir)/configure \ + $(configure_dir)/configure \ config.status \ backend.RecursiveMakeBackend \ $(NULL) @@ -102,6 +117,18 @@ endif .PHONY: install-manifests install-manifests: $(addprefix install-dist-,$(install_manifests)) +# process_install_manifest needs to be invoked with --no-remove when building +# js as standalone because automated builds are building nspr separately and +# that would remove the resulting files. It is also necessary when building +# js as part of gecko because that would remove the files exported from gecko. +# Eventually, a standalone js build would just be able to build nspr itself, +# removing the need for the former. But that won't likely happen before +# finishing to merge gecko and js build systems, removing the need for the +# latter. +ifdef BUILDING_JS +NO_REMOVE=1 +endif + .PHONY: $(addprefix install-dist-,$(install_manifests)) $(addprefix install-dist-,$(install_manifests)): install-dist-%: $(install_manifest_depends) $(call py_action,process_install_manifest,$(if $(NO_REMOVE),--no-remove )$(DIST)/$* _build_manifests/install/dist_$* $(if $(BUILD_JS),js/src/_build_manifests/install/dist_$*)) @@ -139,10 +166,12 @@ endif # with no regard for PGO passes. This decision could probably be revisited. export:: install-dist-sdk +ifndef BUILDING_JS ifdef ENABLE_TESTS # Additional makefile targets to call automated test suites include $(topsrcdir)/testing/testsuite-targets.mk endif +endif default all:: $(call BUILDSTATUS,TIERS export $(if $(COMPILE_ENVIRONMENT),$(if $(MOZ_PSEUDO_DERECURSE),compile ))libs tools) @@ -181,6 +210,7 @@ endif SYM_STORE_SOURCE_DIRS := $(topsrcdir) +ifndef BUILDING_JS include $(topsrcdir)/toolkit/mozapps/installer/package-name.mk ifdef MOZ_SYMBOLS_EXTRA_BUILDID @@ -225,6 +255,7 @@ endif # so transform it to an immediate assignment. MOZ_SOURCE_STAMP := $(MOZ_SOURCE_STAMP) export MOZ_SOURCE_STAMP +endif #XXX: this is a hack, since we don't want to clobber for MSVC # PGO support, but we can't do this test in client.mk @@ -250,6 +281,21 @@ check:: @relcount=`find $(DIST)/bin -name '*.so' | xargs objdump -R | grep R_386_PC32 | wc -l` && if test $$relcount -gt 0; then echo 'FAILED: R_386_PC32 relocations detected in a shared library. Did you use a system header without adding it to config/system-headers?'; exit 1; else echo 'PASSED'; fi endif +ifdef BUILDING_JS +# Delegate js-specific rules to js +check-%: + $(MAKE) -C js/src $@ + +source-package install: + $(MAKE) -C js/src $@ + +# Every export rule depends on config/export, but the rule for config/export +# doesn't exist when building js non-standalone. +.PHONY: config/export +config/export: + +else + ifdef BUILD_JS js/src/Makefile: subsrcdir := js/src @@ -263,3 +309,4 @@ js/src/export config/export: build/clang-plugin/export endif endif endif +endif diff --git a/client.mk b/client.mk index 49c0a2ae82d..869582ce92c 100644 --- a/client.mk +++ b/client.mk @@ -312,7 +312,6 @@ EXTRA_CONFIG_DEPS := \ $(NULL) $(CONFIGURES): %: %.in $(EXTRA_CONFIG_DEPS) - @$(PYTHON) $(TOPSRCDIR)/js/src/config/check-sync-dirs.py $(TOPSRCDIR)/js/src/build $(TOPSRCDIR)/build @echo Generating $@ using autoconf cd $(@D); $(AUTOCONF) @@ -322,7 +321,6 @@ CONFIG_STATUS_DEPS := \ $(TOPSRCDIR)/CLOBBER \ $(TOPSRCDIR)/nsprpub/configure \ $(TOPSRCDIR)/config/milestone.txt \ - $(TOPSRCDIR)/js/src/config/milestone.txt \ $(TOPSRCDIR)/browser/config/version.txt \ $(TOPSRCDIR)/build/virtualenv_packages.txt \ $(TOPSRCDIR)/python/mozbuild/mozbuild/virtualenv.py \ @@ -396,7 +394,7 @@ endif #################################### # Build it -realbuild:: $(OBJDIR)/Makefile $(OBJDIR)/config.status check-sync-dirs-config +realbuild:: $(OBJDIR)/Makefile $(OBJDIR)/config.status $(MOZ_MAKE) #################################### @@ -454,25 +452,6 @@ cleansrcdir: build/autoconf/clean-config.sh; \ fi; -# Because SpiderMonkey can be distributed and built independently -# of the Mozilla source tree, it contains its own copies of many of -# the files used by the top-level Mozilla build process, from the -# 'config' and 'build' subtrees. -# -# To make it simpler to keep the copies in sync, we follow the policy -# that the SpiderMonkey copies must always be exact copies of those in -# the containing Mozilla tree. If you've made a change in one, it -# belongs in the other as well. If the change isn't right for both -# places, then that's something to bring up with the other developers. -# -# Some files are reasonable to diverge; for example, -# js/src/config/autoconf.mk.in doesn't need most of the stuff in -# config/autoconf.mk.in. -.PHONY: check-sync-dirs -check-sync-dirs: check-sync-dirs-build check-sync-dirs-config -check-sync-dirs-%: - @$(PYTHON) $(TOPSRCDIR)/js/src/config/check-sync-dirs.py $(TOPSRCDIR)/js/src/$* $(TOPSRCDIR)/$* - echo-variable-%: @echo $($*) diff --git a/config/Makefile.in b/config/Makefile.in index 1487075bf0f..4c5f3812308 100644 --- a/config/Makefile.in +++ b/config/Makefile.in @@ -27,19 +27,21 @@ nsinstall$(HOST_BIN_SUFFIX): $(HOST_PROGRAM) cp $^ $@.tmp mv $@.tmp $@ -NSINSTALL_FILES := nsinstall$(HOST_BIN_SUFFIX) +NSINSTALL_EXECUTABLES := nsinstall$(HOST_BIN_SUFFIX) NSINSTALL_DEST := $(DIST)/bin NSINSTALL_TARGET := export INSTALL_TARGETS += NSINSTALL endif endif +ifndef BUILDING_JS HEADERS_FILES = \ $(DEPTH)/mozilla-config.h \ $(NULL) HEADERS_DEST := $(DIST)/include HEADERS_TARGET := export INSTALL_TARGETS += HEADERS +endif PYTHON_UNIT_TESTS := $(wildcard $(srcdir)/tests/unit-*.py) @@ -47,6 +49,7 @@ include $(topsrcdir)/config/rules.mk HOST_CFLAGS += -DUNICODE -D_UNICODE +ifndef BUILDING_JS # Generate a new buildid every time we "export" in config... that's only # supposed to be once per-build! export:: @@ -55,6 +58,7 @@ ifdef MOZ_BUILD_DATE else $(PYTHON) $(topsrcdir)/toolkit/xre/make-platformini.py --print-buildid > buildid endif +endif ifdef WRAP_SYSTEM_INCLUDES export-preqs = \ @@ -108,10 +112,10 @@ GARBAGE += \ FORCE: -check-preqs = \ - check-jar-mn \ - check-makefiles \ - $(NULL) +ifndef BUILDING_JS +check-preqs += check-jar-mn +endif +check-preqs += check-makefiles check:: $(check-preqs) diff --git a/config/baseconfig.mk b/config/baseconfig.mk index 78e50bbfbd4..c5e50dd34bf 100644 --- a/config/baseconfig.mk +++ b/config/baseconfig.mk @@ -2,7 +2,18 @@ includedir := $(includedir)/$(MOZ_APP_NAME)-$(MOZ_APP_VERSION) idldir = $(datadir)/idl/$(MOZ_APP_NAME)-$(MOZ_APP_VERSION) installdir = $(libdir)/$(MOZ_APP_NAME)-$(MOZ_APP_VERSION) sdkdir = $(libdir)/$(MOZ_APP_NAME)-devel-$(MOZ_APP_VERSION) -DIST = $(DEPTH)/dist +ifndef TOP_DIST +TOP_DIST = dist +endif +ifneq (,$(filter /%,$(TOP_DIST))) +DIST = $(TOP_DIST) +else +ifeq (.,$(DEPTH)) +DIST = $(TOP_DIST) +else +DIST = $(DEPTH)/$(TOP_DIST) +endif +endif # We do magic with OBJ_SUFFIX in config.mk, the following ensures we don't # manually use it before config.mk inclusion diff --git a/config/config.mk b/config/config.mk index f405445ebfd..2bf2db44a33 100644 --- a/config/config.mk +++ b/config/config.mk @@ -717,7 +717,7 @@ else ifeq ($(HOST_OS_ARCH),WINNT) NSINSTALL = $(NSINSTALL_PY) else -NSINSTALL = $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX) +NSINSTALL = $(DIST)/bin/nsinstall$(HOST_BIN_SUFFIX) endif # WINNT endif # OS2 endif # NSINSTALL_BIN diff --git a/config/moz.build b/config/moz.build index bf8ca9a80f7..04dd19e5c5f 100644 --- a/config/moz.build +++ b/config/moz.build @@ -10,9 +10,7 @@ NO_DIST_INSTALL = True NO_VISIBILITY_FLAGS = True CONFIGURE_SUBST_FILES += [ - 'autoconf.mk', 'doxygen.cfg', - 'emptyvars.mk', 'makefiles/test/Makefile', 'tests/makefiles/autodeps/Makefile', 'tests/src-simple/Makefile', diff --git a/config/rules.mk b/config/rules.mk index a9887d9c5eb..945952161a0 100644 --- a/config/rules.mk +++ b/config/rules.mk @@ -364,6 +364,10 @@ ifdef MOZ_UPDATE_XTERM UPDATE_TITLE = printf '\033]0;%s in %s\007' $(1) $(relativesrcdir)/$(2) ; endif +ifdef BUILDING_JS +NO_BUILDSTATUS_MESSAGES=1 +endif + ifdef MACH ifndef NO_BUILDSTATUS_MESSAGES define BUILDSTATUS @@ -1453,9 +1457,9 @@ endif # file would be $(DIST)/include/bar/baz/qux.h instead of $(DIST)/include/qux.h # If we're using binary nsinstall and it's not built yet, fallback to python nsinstall. -ifneq (,$(filter $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX),$(install_cmd))) -ifeq (,$(wildcard $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX))) -nsinstall_is_usable = $(if $(wildcard $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX)),yes) +ifneq (,$(filter $(DIST)/bin/nsinstall$(HOST_BIN_SUFFIX),$(install_cmd))) +ifeq (,$(wildcard $(DIST)/bin/nsinstall$(HOST_BIN_SUFFIX))) +nsinstall_is_usable = $(if $(wildcard $(DIST)/bin/nsinstall$(HOST_BIN_SUFFIX)),yes) define install_cmd_override $(1): install_cmd = $$(if $$(nsinstall_is_usable),$$(INSTALL),$$(NSINSTALL_PY)) $$(1) diff --git a/config/static-checking-config.mk b/config/static-checking-config.mk index b134f916dc2..a780dc87102 100644 --- a/config/static-checking-config.mk +++ b/config/static-checking-config.mk @@ -7,6 +7,7 @@ DEHYDRA_SCRIPT = $(topsrcdir)/config/static-checking.js +ifndef BUILDING_JS DEHYDRA_MODULES = \ $(topsrcdir)/xpcom/analysis/final.js \ $(topsrcdir)/xpcom/analysis/must-override.js \ @@ -17,9 +18,13 @@ TREEHYDRA_MODULES = \ $(topsrcdir)/xpcom/analysis/stack.js \ $(topsrcdir)/xpcom/analysis/flow.js \ $(topsrcdir)/xpcom/analysis/static-init.js \ - $(topsrcdir)/js/src/jsstack.js \ $(topsrcdir)/layout/generic/frame-verify.js \ $(NULL) +endif + +TREEHYDRA_MODULES += \ + $(topsrcdir)/js/src/jsstack.js \ + $(NULL) DEHYDRA_ARG_PREFIX=-fplugin-arg-gcc_treehydra- @@ -38,7 +43,11 @@ OS_CXXFLAGS += $(DEHYDRA_FLAGS) endif ifdef ENABLE_CLANG_PLUGIN +ifndef BUILDING_JS CLANG_PLUGIN := $(DEPTH)/build/clang-plugin/$(DLL_PREFIX)clang-plugin$(DLL_SUFFIX) +else +CLANG_PLUGIN := $(DEPTH)/../../build/clang-plugin/$(DLL_PREFIX)clang-plugin$(DLL_SUFFIX) +endif OS_CXXFLAGS += -Xclang -load -Xclang $(CLANG_PLUGIN) -Xclang -add-plugin -Xclang moz-check OS_CFLAGS += -Xclang -load -Xclang $(CLANG_PLUGIN) -Xclang -add-plugin -Xclang moz-check endif diff --git a/js/src/Makefile.in b/js/src/Makefile.in index 7d165fbc077..43f12111d9b 100644 --- a/js/src/Makefile.in +++ b/js/src/Makefile.in @@ -72,31 +72,6 @@ endif MOZILLA_DTRACE_SRC = $(srcdir)/devtools/javascript-trace.d endif -backend.RecursiveMakeBackend: - @echo 'Build configuration changed. Regenerating backend.' - $(PYTHON) config.status - -Makefile: backend.RecursiveMakeBackend - @$(TOUCH) $@ - -include backend.RecursiveMakeBackend.pp - -default:: backend.RecursiveMakeBackend - -default:: - $(call py_action,process_install_manifest,--no-remove $(DIST)/include _build_manifests/install/dist_include) - -ifneq (,$(CROSS_COMPILE)$(filter-out WINNT OS2,$(OS_ARCH))) -# nsinstall doesn't get built until we enter config/ in the exports phase, -# so we'll have to manually ensure it gets built here if we want to use -# $(EXPORTS) -export:: config/nsinstall$(HOST_BIN_SUFFIX) -$(PUBLIC) $(SDK_PUBLIC): config/nsinstall$(HOST_BIN_SUFFIX) - -config/nsinstall$(HOST_BIN_SUFFIX): $(srcdir)/config/nsinstall.c $(srcdir)/config/pathsub.c - $(MAKE) -C config/ nsinstall$(HOST_BIN_SUFFIX) -endif - # Ensure symbol versions of shared library on Linux do not conflict # with those in libxul. ifeq (Linux,$(OS_TARGET)) @@ -135,16 +110,16 @@ ifdef ENABLE_INTL_API ifdef MOZ_SHARED_ICU ifeq ($(OS_ARCH),WINNT) ifdef JS_SHARED_LIBRARY - ICU_FILES := $(foreach libname,$(ICU_LIB_NAMES),intl/icu/target/lib/$(libname)$(ICU_LIB_SUFFIX)$(MOZ_ICU_VERSION).dll) + ICU_FILES := $(foreach libname,$(ICU_LIB_NAMES),$(DEPTH)/intl/icu/target/lib/$(libname)$(ICU_LIB_SUFFIX)$(MOZ_ICU_VERSION).dll) endif else # ! WINNT ifeq ($(OS_ARCH),Darwin) ifdef JS_SHARED_LIBRARY - ICU_FILES := $(foreach libname,$(ICU_LIB_NAMES),intl/icu/target/lib/$(DLL_PREFIX)$(libname).$(MOZ_ICU_VERSION)$(DLL_SUFFIX)) + ICU_FILES := $(foreach libname,$(ICU_LIB_NAMES),$(DEPTH)/intl/icu/target/lib/$(DLL_PREFIX)$(libname).$(MOZ_ICU_VERSION)$(DLL_SUFFIX)) endif else # ! Darwin ifdef JS_SHARED_LIBRARY - ICU_FILES := $(foreach libname,$(ICU_LIB_NAMES),intl/icu/target/lib/$(DLL_PREFIX)$(libname)$(DLL_SUFFIX).$(MOZ_ICU_VERSION)) + ICU_FILES := $(foreach libname,$(ICU_LIB_NAMES),$(DEPTH)/intl/icu/target/lib/$(DLL_PREFIX)$(libname)$(DLL_SUFFIX).$(MOZ_ICU_VERSION)) endif endif endif # WINNT @@ -157,7 +132,7 @@ ifdef ENABLE_INTL_API else # !MOZ_SHARED_ICU ifeq ($(OS_ARCH),WINNT) ICU_LIB_RENAME = $(foreach libname,$(ICU_LIB_NAMES),\ - cp -p intl/icu/target/lib/s$(libname)$(ICU_LIB_SUFFIX).lib intl/icu/target/lib/$(libname).lib;) + cp -p $(DEPTH)/intl/icu/target/lib/s$(libname)$(ICU_LIB_SUFFIX).lib $(DEPTH)/intl/icu/target/lib/$(libname).lib;) endif endif # MOZ_SHARED_ICU endif # !MOZ_NATIVE_ICU @@ -191,8 +166,8 @@ ifdef MOZ_NATIVE_ICU LOCAL_INCLUDES += $(MOZ_ICU_CFLAGS) else LOCAL_INCLUDES += \ - -I$(topsrcdir)/../../intl/icu/source/common \ - -I$(topsrcdir)/../../intl/icu/source/i18n \ + -I$(topsrcdir)/intl/icu/source/common \ + -I$(topsrcdir)/intl/icu/source/i18n \ $(NULL) endif @@ -232,16 +207,16 @@ endif buildicu: # ICU's build system is full of races, so force non-parallel build. ifdef CROSS_COMPILE - +$(ICU_MAKE) -j1 -C intl/icu/host STATIC_O=$(OBJ_SUFFIX) GENRBOPTS='-k -R -C' + +$(ICU_MAKE) -j1 -C $(DEPTH)/intl/icu/host STATIC_O=$(OBJ_SUFFIX) GENRBOPTS='-k -R -C' endif - +$(ICU_MAKE) -j1 -C intl/icu/target STATIC_O=$(OBJ_SUFFIX) GENRBOPTS='-k -R' + +$(ICU_MAKE) -j1 -C $(DEPTH)/intl/icu/target STATIC_O=$(OBJ_SUFFIX) GENRBOPTS='-k -R' $(ICU_LIB_RENAME) distclean clean:: ifdef CROSS_COMPILE - $(call SUBMAKE,$@,intl/icu/host) + $(call SUBMAKE,$@,$(DEPTH)/intl/icu/host) endif - $(call SUBMAKE,$@,intl/icu/target) + $(call SUBMAKE,$@,$(DEPTH)/intl/icu/target) endif endif @@ -254,12 +229,12 @@ endif # check_vanilla_allocations.py is tailored to Linux, so only run it there. # That should be enough to catch any problems. check-vanilla-allocations: - $(PYTHON) $(srcdir)/config/check_vanilla_allocations.py $(REAL_LIBRARY) + $(PYTHON) $(topsrcdir)/config/check_vanilla_allocations.py $(REAL_LIBRARY) # The "aggressive" variant will likely fail on some compiler/platform # combinations, but is worth running by hand every once in a while. check-vanilla-allocations-aggressive: - $(PYTHON) $(srcdir)/config/check_vanilla_allocations.py --aggressive $(REAL_LIBRARY) + $(PYTHON) $(topsrcdir)/config/check_vanilla_allocations.py --aggressive $(REAL_LIBRARY) ifeq ($(OS_ARCH),Linux) check:: check-vanilla-allocations @@ -269,7 +244,7 @@ endif # If the number of OOM errors changes, update the number below. We intend this # number to go down over time, by fixing OOMs. check-ooms: - $(wildcard $(RUN_TEST_PROGRAM)) $(PYTHON) -u $(srcdir)/config/find_OOM_errors.py --regression 125 + $(wildcard $(RUN_TEST_PROGRAM)) $(PYTHON) -u $(topsrcdir)/config/find_OOM_errors.py --regression 125 ifeq ($(MOZ_DEBUG),1) #check:: check-ooms @@ -289,7 +264,7 @@ endif endif check-style:: - (cd $(srcdir) && $(PYTHON) config/check_spidermonkey_style.py); + (cd $(srcdir) && $(PYTHON) $(topsrcdir)/config/check_spidermonkey_style.py); check-jit-test:: $(JITTEST_ASAN_ENV) $(wildcard $(RUN_TEST_PROGRAM)) $(PYTHON) -u $(srcdir)/jit-test/jit_test.py \ diff --git a/js/src/aclocal.m4 b/js/src/aclocal.m4 index 1b191092890..c11775bdd13 100644 --- a/js/src/aclocal.m4 +++ b/js/src/aclocal.m4 @@ -31,4 +31,13 @@ builtin(include, ../../build/autoconf/python-virtualenv.m4)dnl builtin(include, ../../build/autoconf/winsdk.m4)dnl builtin(include, ../../build/autoconf/icu.m4)dnl +define([__MOZ_AC_INIT_PREPARE], defn([AC_INIT_PREPARE])) +define([AC_INIT_PREPARE], +[if test -z "$srcdir"; then + srcdir=`dirname "[$]0"` +fi +srcdir="$srcdir/../.." +__MOZ_AC_INIT_PREPARE($1) +]) + MOZ_PROG_CHECKMSYS() diff --git a/js/src/build/check-sync-exceptions b/js/src/build/check-sync-exceptions deleted file mode 100644 index 0d20b6487c6..00000000000 --- a/js/src/build/check-sync-exceptions +++ /dev/null @@ -1 +0,0 @@ -*.pyc diff --git a/js/src/build/msys-perl-wrapper b/js/src/build/msys-perl-wrapper deleted file mode 100644 index 8ba78ed623e..00000000000 --- a/js/src/build/msys-perl-wrapper +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - - -args="" - -for i in "${@}" -do - case "$i" in - -I?:/*) - i="$(echo "${i}" | sed -e 's|^-I\(.\):/|-I/\1/|')" - ;; - esac - - args="${args} '${i}'" -done - -eval "exec perl $args" diff --git a/js/src/build/qemu-wrap b/js/src/build/qemu-wrap deleted file mode 100755 index e33938955d9..00000000000 --- a/js/src/build/qemu-wrap +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/bash -# this script creates a wrapper shell script for an executable. The idea is the actual executable cannot be -# executed natively (it was cross compiled), but we want to run tests natively. Running this script -# as part of the compilation process will move the non-native executable to a new location, and replace it -# with a script that will run it under qemu. -while [[ -n $1 ]]; do - case $1 in - --qemu) QEMU="$2"; shift 2;; - --libdir) LIBDIR="$2"; shift 2;; - --ld) LD="$2"; shift 2;; - *) exe="$1"; shift;; - esac -done -if [[ -z $LIBDIR ]]; then - echo "You need to specify a directory for the cross libraries when you configure the shell" - echo "You can do this with --with-cross-lib=" - exit 1 -fi -LD=${LD:-$LIBDIR/ld-linux.so.3} -mv $exe $exe.target -# Just hardcode the path to the executable. It'll be pretty obvious if it is doing the wrong thing. - -echo $'#!/bin/bash\n' $QEMU -E LD_LIBRARY_PATH="${LIBDIR}" "$LD" "$(readlink -f "$exe.target")" '"$@"' >"$exe" -chmod +x $exe \ No newline at end of file diff --git a/js/src/build/subconfigure.py b/js/src/build/subconfigure.py deleted file mode 100644 index 17ef57d0bd4..00000000000 --- a/js/src/build/subconfigure.py +++ /dev/null @@ -1,124 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# This script is used to capture the content of config.status-generated -# files and subsequently restore their timestamp if they haven't changed. - -import os -import re -import subprocess -import sys -import pickle - -class File(object): - def __init__(self, path): - self._path = path - self._content = open(path, 'rb').read() - stat = os.stat(path) - self._times = (stat.st_atime, stat.st_mtime) - - def update_time(self): - '''If the file hasn't changed since the instance was created, - restore its old modification time.''' - if not os.path.exists(self._path): - return - if open(self._path, 'rb').read() == self._content: - os.utime(self._path, self._times) - - -# As defined in the various sub-configures in the tree -PRECIOUS_VARS = set([ - 'build_alias', - 'host_alias', - 'target_alias', - 'CC', - 'CFLAGS', - 'LDFLAGS', - 'LIBS', - 'CPPFLAGS', - 'CPP', - 'CCC', - 'CXXFLAGS', - 'CXX', - 'CCASFLAGS', - 'CCAS', -]) - - -# Autoconf, in some of the sub-configures used in the tree, likes to error -# out when "precious" variables change in value. The solution it gives to -# straighten things is to either run make distclean or remove config.cache. -# There's no reason not to do the latter automatically instead of failing, -# doing the cleanup (which, on buildbots means a full clobber), and -# restarting from scratch. -def maybe_clear_cache(): - comment = re.compile(r'^\s+#') - cache = {} - with open('config.cache') as f: - for line in f.readlines(): - if not comment.match(line) and '=' in line: - key, value = line.split('=', 1) - cache[key] = value - for precious in PRECIOUS_VARS: - entry = 'ac_cv_env_%s_value' % precious - if entry in cache and (not precious in os.environ or os.environ[precious] != cache[entry]): - os.remove('config.cache') - return - - -def dump(dump_file, shell): - if os.path.exists('config.cache'): - maybe_clear_cache() - if not os.path.exists('config.status'): - if os.path.exists(dump_file): - os.remove(dump_file) - return - - config_files = [File('config.status')] - - # Scan the config.status output for information about configuration files - # it generates. - config_status_output = subprocess.check_output( - [shell, '-c', './config.status --help'], - stderr=subprocess.STDOUT).splitlines() - state = None - for line in config_status_output: - if line.startswith('Configuration') and line.endswith(':'): - state = 'config' - elif not line.startswith(' '): - state = None - elif state == 'config': - for f in (couple.split(':')[0] for couple in line.split()): - if os.path.isfile(f): - config_files.append(File(f)) - - with open(dump_file, 'wb') as f: - pickle.dump(config_files, f) - - -def adjust(dump_file): - if not os.path.exists(dump_file): - return - - config_files = [] - - try: - with open(dump_file, 'rb') as f: - config_files = pickle.load(f) - except Exception: - pass - - for f in config_files: - f.update_time() - - os.remove(dump_file) - - -CONFIG_DUMP = 'config_files.pkl' - -if __name__ == '__main__': - if sys.argv[1] == 'dump': - dump(CONFIG_DUMP, sys.argv[2]) - elif sys.argv[1] == 'adjust': - adjust(CONFIG_DUMP) diff --git a/js/src/build/unix/add_phony_targets.py b/js/src/build/unix/add_phony_targets.py deleted file mode 100644 index 86fc328a503..00000000000 --- a/js/src/build/unix/add_phony_targets.py +++ /dev/null @@ -1,33 +0,0 @@ -import pymake.data -import pymake.parser -import pymake.parserdata -import sys - -''' -Modifies the output of Sun Studio's -xM to look more like the output -of gcc's -MD -MP, adding phony targets for dependencies. -''' - - -def add_phony_targets(path): - print path - deps = set() - targets = set() - for stmt in pymake.parser.parsefile(path): - if isinstance(stmt, pymake.parserdata.Rule): - assert isinstance(stmt.depexp, pymake.data.StringExpansion) - assert isinstance(stmt.targetexp, pymake.data.StringExpansion) - for d in stmt.depexp.s.split(): - deps.add(d) - for t in stmt.targetexp.s.split(): - targets.add(t) - phony_targets = deps - targets - if not phony_targets: - return - with open(path, 'a') as f: - f.writelines('%s:\n' % d for d in phony_targets) - - -if __name__ == '__main__': - for f in sys.argv[1:]: - add_phony_targets(f) diff --git a/js/src/build/unix/headers/bits/c++config.h b/js/src/build/unix/headers/bits/c++config.h deleted file mode 100644 index c0182c12858..00000000000 --- a/js/src/build/unix/headers/bits/c++config.h +++ /dev/null @@ -1,2 +0,0 @@ -#include_next -#undef _GLIBCXX_USE_FLOAT128 diff --git a/js/src/build/unix/print-failed-commands.sh b/js/src/build/unix/print-failed-commands.sh deleted file mode 100755 index 7f6b73d33e1..00000000000 --- a/js/src/build/unix/print-failed-commands.sh +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/sh -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# -# Usage from makefile: -# ELOG = . $(topdir)/build/autoconf/print-failed-commands.sh -# $(ELOG) $(CC) $CFLAGS -o $@ $< -# -# This shell script is used by the build system to print out commands that fail -# to execute properly. It is designed to make the "make -s" command more -# useful. -# -# Note that in the example we are sourcing rather than execing the script. -# Since make already started a shell for us, we might as well use it rather -# than starting a new one. - -( exec "$@" ) || { - echo - echo "In the directory " `pwd` - echo "The following command failed to execute properly:" - echo "$@" - exit 1; -} diff --git a/js/src/build/unix/uniq.pl b/js/src/build/unix/uniq.pl deleted file mode 100644 index 301240e0310..00000000000 --- a/js/src/build/unix/uniq.pl +++ /dev/null @@ -1,91 +0,0 @@ -#!/usr/bin/env perl - -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -##----------------------------## -##---] CORE/CPAN INCLUDES [---## -##----------------------------## -use strict; -use warnings; -use Getopt::Long; - -##-------------------## -##---] EXPORTS [---## -##-------------------## -our $VERSION = qw(1.1); - -##-------------------## -##---] GLOBALS [---## -##-------------------## -my %argv; -my $modver = $Getopt::Long::VERSION || 0; -my $isOldGetopt = ($modver eq '2.25') ? 1 : 0; - -########################################################################### -## Intent: Script init function -########################################################################### -sub init -{ - if ($isOldGetopt) - { - # mozilla.build/mingw perl in need of an upgrade - # emulate Getopt::Long switch|short:init - foreach (qw(debug regex sort)) - { - if (defined($argv{$_})) - { - $argv{$_} ||= 1; - } - } - } -} # init - -##----------------## -##---] MAIN [---## -##----------------## -my @args = ($isOldGetopt) - ? qw(debug|d regex|r sort|s) - : qw(debug|d:1 regex|r:1 sort|s:1) - ; - -unless(GetOptions(\%argv, @args)) -{ - print "Usage: $0\n"; - print " --sort Sort list elements early\n"; - print " --regex Exclude subdirs by pattern\n"; -} - -init(); -my $debug = $argv{debug} || 0; - -my %seen; -my @out; -my @in = ($argv{sort}) ? sort @ARGV : @ARGV; - -foreach my $d (@in) -{ - next if ($seen{$d}++); - - print " arg is $d\n" if ($debug); - - if ($argv{regex}) - { - my $found = 0; - foreach my $dir (@out) - { - my $dirM = quotemeta($dir); - $found++, last if ($d eq $dir || $d =~ m!^${dirM}\/!); - } - print "Adding $d\n" if ($debug && !$found); - push @out, $d if (!$found); - } else { - print "Adding: $d\n" if ($debug); - push(@out, $d); - } -} - -print "@out\n" - -# EOF diff --git a/js/src/build/win32/pgomerge.py b/js/src/build/win32/pgomerge.py deleted file mode 100644 index 313d66870de..00000000000 --- a/js/src/build/win32/pgomerge.py +++ /dev/null @@ -1,44 +0,0 @@ -#!/usr/bin/python -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# Usage: pgomerge.py -# Gathers .pgc files from dist/bin and merges them into -# $PWD/$basename.pgd using pgomgr, then deletes them. -# No errors if any of these files don't exist. - -import sys, os, os.path, subprocess -if not sys.platform == "win32": - raise Exception("This script was only meant for Windows.") - -def MergePGOFiles(basename, pgddir, pgcdir): - """Merge pgc files produced from an instrumented binary - into the pgd file for the second pass of profile-guided optimization - with MSVC. |basename| is the name of the DLL or EXE without the - extension. |pgddir| is the path that contains .pgd - (should be the objdir it was built in). |pgcdir| is the path - containing basename!N.pgc files, which is probably dist/bin. - Calls pgomgr to merge each pgc file into the pgd, then deletes - the pgc files.""" - if not os.path.isdir(pgddir) or not os.path.isdir(pgcdir): - return - pgdfile = os.path.abspath(os.path.join(pgddir, basename + ".pgd")) - if not os.path.isfile(pgdfile): - return - for file in os.listdir(pgcdir): - if file.startswith(basename+"!") and file.endswith(".pgc"): - try: - pgcfile = os.path.normpath(os.path.join(pgcdir, file)) - subprocess.call(['pgomgr', '-merge', - pgcfile, - pgdfile]) - os.remove(pgcfile) - except OSError: - pass - -if __name__ == '__main__': - if len(sys.argv) != 3: - print >>sys.stderr, "Usage: pgomerge.py " - sys.exit(1) - MergePGOFiles(sys.argv[1], os.getcwd(), sys.argv[2]) diff --git a/js/src/config/Makefile.in b/js/src/config/Makefile.in deleted file mode 100644 index 7bed1ff4a1c..00000000000 --- a/js/src/config/Makefile.in +++ /dev/null @@ -1,47 +0,0 @@ -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# IMPORTANT: Disable NSBUILDROOT for this directory only, otherwise we have -# a recursive rule for finding nsinstall and the Perl scripts. -ifdef NSBUILDROOT -override NSBUILDROOT := -endif - -ifdef GNU_CC -MODULE_OPTIMIZE_FLAGS = -O3 -endif - -include $(topsrcdir)/config/config.mk - -ifneq (WINNT,$(HOST_OS_ARCH)) -# Ensure nsinstall is atomically created -nsinstall$(HOST_BIN_SUFFIX): $(HOST_PROGRAM) - cp $^ $@.tmp - mv $@.tmp $@ - -NSINSTALL_FILES := nsinstall$(HOST_BIN_SUFFIX) -NSINSTALL_DEST := $(DIST)/bin -NSINSTALL_TARGET := export -INSTALL_TARGETS += NSINSTALL -endif - -include $(topsrcdir)/config/rules.mk - -HOST_CFLAGS += -DUNICODE -D_UNICODE - -ifdef WRAP_SYSTEM_INCLUDES -export:: \ - $(call mkdir_deps,system_wrappers_js) \ - $(NULL) - $(PYTHON) -m mozbuild.action.preprocessor $(DEFINES) $(ACDEFINES) \ - $(srcdir)/system-headers | $(PERL) $(srcdir)/make-system-wrappers.pl system_wrappers_js - $(INSTALL) system_wrappers_js $(DIST) - -GARBAGE_DIRS += system_wrappers_js -endif - -GARBAGE += $(srcdir)/*.pyc *.pyc - -FORCE: diff --git a/js/src/config/Moz/Milestone.pm b/js/src/config/Moz/Milestone.pm deleted file mode 100644 index 722203298fa..00000000000 --- a/js/src/config/Moz/Milestone.pm +++ /dev/null @@ -1,220 +0,0 @@ -#!/usr/bin/perl -w -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -package Moz::Milestone; -use strict; - -use vars qw($officialMilestone - $milestone); - -local $Moz::Milestone::milestone; -local $Moz::Milestone::officialMilestone; - -# -# Usage: getOfficialMilestone($milestoneFile) -# Returns full milestone (x.x.x.x[ab12pre+]) -# -sub getOfficialMilestone($) { - my $mfile = $_[0]; - open(FILE,"$mfile") || - die ("Can't open $mfile for reading!"); - - my $num = ; - while($num =~ /^\s*#/ || $num !~ /^\d/) { - $num = ; - } - - close(FILE); - if ($num !~ /^\d/) { return; } - chomp($num); - # Remove extra ^M caused by using dos-mode line-endings - chop $num if (substr($num, -1, 1) eq "\r"); - $Moz::Milestone::officialMilestone = $num; - $Moz::Milestone::milestone = &getMilestoneNum; - return $num; -} - -# -# Usage: getMilestoneNum($num) -# Returns: milestone without a + if it exists. -# -sub getMilestoneNum { - if (defined($Moz::Milestone::milestone)) { - return $Moz::Milestone::milestone; - } - - if (defined($Moz::Milestone::officialMilestone)) { - $Moz::Milestone::milestone = $Moz::Milestone::officialMilestone; - } else { - $Moz::Milestone::milestone = $_[0]; - } - - if ($Moz::Milestone::milestone =~ /\+$/) { # for x.x.x+, strip off the + - $Moz::Milestone::milestone =~ s/\+$//; - } - - return $Moz::Milestone::milestone; -} - -# -# Usage: getMilestoneQualifier($num) -# Returns: + if it exists. -# -sub getMilestoneQualifier { - my $milestoneQualifier; - if (defined($Moz::Milestone::officialMilestone)) { - $milestoneQualifier = $Moz::Milestone::officialMilestone; - } else { - $milestoneQualifier = $_[0]; - } - - if ($milestoneQualifier =~ /\+$/) { - return "+"; - } -} - -sub getMilestoneMajor { - my $milestoneMajor; - if (defined($Moz::Milestone::milestone)) { - $milestoneMajor = $Moz::Milestone::milestone; - } else { - $milestoneMajor = $_[0]; - } - my @parts = split(/\./,$milestoneMajor); - return $parts[0]; -} - -sub getMilestoneMinor { - my $milestoneMinor; - if (defined($Moz::Milestone::milestone)) { - $milestoneMinor = $Moz::Milestone::milestone; - } else { - $milestoneMinor = $_[0]; - } - my @parts = split(/\./,$milestoneMinor); - - if ($#parts < 1 ) { return 0; } - return $parts[1]; -} - -sub getMilestoneMini { - my $milestoneMini; - if (defined($Moz::Milestone::milestone)) { - $milestoneMini = $Moz::Milestone::milestone; - } else { - $milestoneMini = $_[0]; - } - my @parts = split(/\./,$milestoneMini); - - if ($#parts < 2 ) { return 0; } - return $parts[2]; -} - -sub getMilestoneMicro { - my $milestoneMicro; - if (defined($Moz::Milestone::milestone)) { - $milestoneMicro = $Moz::Milestone::milestone; - } else { - $milestoneMicro = $_[0]; - } - my @parts = split(/\./,$milestoneMicro); - - if ($#parts < 3 ) { return 0; } - return $parts[3]; -} - -sub getMilestoneAB { - my $milestoneAB; - if (defined($Moz::Milestone::milestone)) { - $milestoneAB = $Moz::Milestone::milestone; - } else { - $milestoneAB = $_[0]; - } - - if ($milestoneAB =~ /a/) { return "alpha"; } - if ($milestoneAB =~ /b/) { return "beta"; } - return "final"; -} - -# -# Usage: getMilestoneABWithNum($milestoneFile) -# Returns the alpha and beta tag with its number (a1, a2, b3, ...) -# -sub getMilestoneABWithNum { - my $milestoneABNum; - if (defined($Moz::Milestone::milestone)) { - $milestoneABNum = $Moz::Milestone::milestone; - } else { - $milestoneABNum = $_[0]; - } - - if ($milestoneABNum =~ /([ab]\d+)/) { - return $1; - } else { - return ""; - } -} - -# -# build_file($template_file,$output_file) -# -sub build_file($$) { - my @FILE; - my @MILESTONE_PARTS; - my $MINI_VERSION = 0; - my $MICRO_VERSION = 0; - my $OFFICIAL = 0; - my $QUALIFIER = ""; - - if (!defined($Moz::Milestone::milestone)) { die("$0: no milestone file set!\n"); } - @MILESTONE_PARTS = split(/\./, &getMilestoneNum); - if ($#MILESTONE_PARTS >= 2) { - $MINI_VERSION = 1; - } else { - $MILESTONE_PARTS[2] = 0; - } - if ($#MILESTONE_PARTS >= 3) { - $MICRO_VERSION = 1; - } else { - $MILESTONE_PARTS[3] = 0; - } - if (! &getMilestoneQualifier) { - $OFFICIAL = 1; - } else { - $QUALIFIER = "+"; - } - - if (-e $_[0]) { - open(FILE, "$_[0]") || die("$0: Can't open $_[0] for reading!\n"); - @FILE = ; - close(FILE); - - open(FILE, ">$_[1]") || die("$0: Can't open $_[1] for writing!\n"); - - # - # There will be more of these based on what we need for files. - # - foreach(@FILE) { - s/__MOZ_MAJOR_VERSION__/$MILESTONE_PARTS[0]/g; - s/__MOZ_MINOR_VERSION__/$MILESTONE_PARTS[1]/g; - s/__MOZ_MINI_VERSION__/$MILESTONE_PARTS[2]/g; - s/__MOZ_MICRO_VERSION__/$MILESTONE_PARTS[3]/g; - if ($MINI_VERSION) { - s/__MOZ_OPTIONAL_MINI_VERSION__/.$MILESTONE_PARTS[2]/g; - } - if ($MICRO_VERSION) { - s/__MOZ_OPTIONAL_MICRO_VERSION__/.$MILESTONE_PARTS[3]/g; - } - - print FILE $_; - } - close(FILE); - } else { - die("$0: $_[0] doesn't exist for autoversioning!\n"); - } - -} - -1; diff --git a/js/src/config/autoconf.mk.in b/js/src/config/autoconf.mk.in deleted file mode 100644 index df6cc89badb..00000000000 --- a/js/src/config/autoconf.mk.in +++ /dev/null @@ -1,6 +0,0 @@ -ifndef INCLUDED_AUTOCONF_MK -INCLUDED_AUTOCONF_MK = 1 -include $(DEPTH)/config/emptyvars.mk -@ALLSUBSTS@ -include $(topsrcdir)/config/baseconfig.mk -endif diff --git a/js/src/config/baseconfig.mk b/js/src/config/baseconfig.mk deleted file mode 100644 index 230c2564035..00000000000 --- a/js/src/config/baseconfig.mk +++ /dev/null @@ -1,42 +0,0 @@ -installdir = $(libdir)/$(MOZ_APP_NAME)-$(MOZ_APP_VERSION) -sdkdir = $(libdir)/$(MOZ_APP_NAME)-devel-$(MOZ_APP_VERSION) - -ifneq (,$(filter /%,$(TOP_DIST))) -DIST = $(TOP_DIST) -else -ifeq (.,$(DEPTH)) -DIST = $(TOP_DIST) -else -DIST = $(DEPTH)/$(TOP_DIST) -endif -endif - -# We do magic with OBJ_SUFFIX in config.mk, the following ensures we don't -# manually use it before config.mk inclusion -_OBJ_SUFFIX := $(OBJ_SUFFIX) -OBJ_SUFFIX = $(error config/config.mk needs to be included before using OBJ_SUFFIX) - -ifeq ($(HOST_OS_ARCH),WINNT) -# We only support building with pymake or a non-msys gnu make version -# strictly above 4.0. -ifndef .PYMAKE -ifeq (a,$(firstword a$(subst /, ,$(abspath .)))) -$(error MSYS make is not supported) -endif -# 4.0- happens to be greater than 4.0, lower than the mozmake version, -# and lower than 4.0.1 or 4.1, whatever next version of gnu make will -# be released. -ifneq (4.0-,$(firstword $(sort 4.0- $(MAKE_VERSION)))) -$(error Make version too old. Only versions strictly greater than 4.0 are supported.) -endif -endif -ifeq (a,$(firstword a$(subst /, ,$(srcdir)))) -$(error MSYS-style srcdir are not supported for Windows builds.) -endif -endif # WINNT - -ifdef .PYMAKE -include_deps = $(eval -includedeps $(1)) -else -include_deps = $(eval -include $(1)) -endif diff --git a/js/src/config/check-sync-dirs.py b/js/src/config/check-sync-dirs.py deleted file mode 100644 index 22204b11dc5..00000000000 --- a/js/src/config/check-sync-dirs.py +++ /dev/null @@ -1,108 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# check-sync-dirs.py --- check that one directory is an exact subset of another -# -# Usage: python check-sync-dirs.py COPY ORIGINAL -# -# Check that the files present in the directory tree COPY are exact -# copies of their counterparts in the directory tree ORIGINAL. COPY -# need not have all the files in ORIGINAL, but COPY may not have files -# absent from ORIGINAL. -# -# Each directory in COPY may have a file named -# 'check-sync-exceptions', which lists files in COPY that need not be -# the same as the corresponding file in ORIGINAL, or exist at all in -# ORIGINAL. (The 'check-sync-exceptions' file itself is always -# treated as exceptional.) Blank lines and '#' comments in the file -# are ignored. - -import sys -import os -from os.path import join -import filecmp -import textwrap -import fnmatch - -if len(sys.argv) != 3: - print >> sys.stderr, 'TEST-UNEXPECTED-FAIL | check-sync-dirs.py | Usage: %s COPY ORIGINAL' % sys.argv[0] - sys.exit(1) - -copy = os.path.abspath(sys.argv[1]) -original = os.path.abspath(sys.argv[2]) - -# Return the contents of FILENAME, a 'check-sync-exceptions' file, as -# a dictionary whose keys are exactly the list of filenames, along -# with the basename of FILENAME itself. If FILENAME does not exist, -# return the empty dictionary. -def read_exceptions(filename): - if (os.path.exists(filename)): - f = file(filename) - exceptions = {} - for line in f: - line = line.strip() - if line != '' and line[0] != '#': - exceptions[line] = None - exceptions[os.path.basename (filename)] = None - f.close() - return exceptions - else: - return {} - -# Return true if FILENAME matches any pattern in the list of filename -# patterns PATTERNS. -def fnmatch_any(filename, patterns): - for pattern in patterns: - if fnmatch.fnmatch(filename, pattern): - return True - return False - -# Check the contents of the directory tree COPY against ORIGINAL. For each -# file that differs, apply REPORT to COPY, ORIGINAL, and the file's -# relative path. COPY and ORIGINAL should be absolute. Ignore files -# that match patterns given in the list IGNORE. -def check(copy, original): - os.chdir(copy) - for (dirpath, dirnames, filenames) in os.walk('.'): - exceptions = read_exceptions(join(dirpath, 'check-sync-exceptions')) - for dirname in dirnames: - if fnmatch_any(dirname, exceptions): - dirnames.remove(dirname) - break - for filename in filenames: - if fnmatch_any(filename, exceptions): - continue - relative_name = join(dirpath, filename) - original_name = join(original, relative_name) - if (os.path.exists(original_name) - and filecmp.cmp(relative_name, original_name, False)): - continue - report(copy, original, relative_name) - -differences_found = False - -# Print an error message for DIFFERING, which was found to differ -# between COPY and ORIGINAL. Set the global variable differences_found. -def report(copy, original, differing): - global differences_found - if not differences_found: - print >> sys.stderr, 'TEST-UNEXPECTED-FAIL | check-sync-dirs.py | build file copies are not in sync\n' \ - 'TEST-INFO | check-sync-dirs.py | file(s) found in: %s\n' \ - 'TEST-INFO | check-sync-dirs.py | differ from their originals in: %s' \ - % (copy, original) - print >> sys.stderr, 'TEST-INFO | check-sync-dirs.py | differing file: %s' % differing - differences_found = True - -check(copy, original) - -if differences_found: - msg = '''In general, the files in '%s' should always be exact copies of -originals in '%s'. A change made to one should also be made to the -other. See 'check-sync-dirs.py' for more details.''' \ - % (copy, original) - print >> sys.stderr, textwrap.fill(msg, 75) - sys.exit(1) - -print >> sys.stderr, 'TEST-PASS | check-sync-dirs.py | %s <= %s' % (copy, original) -sys.exit(0) diff --git a/js/src/config/check-sync-exceptions b/js/src/config/check-sync-exceptions deleted file mode 100644 index 07b70a5dfe1..00000000000 --- a/js/src/config/check-sync-exceptions +++ /dev/null @@ -1,27 +0,0 @@ -Makefile.in -Makefile -autoconf.mk.in -autoconf.mk -baseconfig.mk -check-sync-dirs.py -static-checking-config.mk -nsinstall -nsinstall.exe -host_nsinstall.o -host_pathsub.o -moz.build - -# This is a copy of nspr's config/make-system-wrappers.pl. -make-system-wrappers.pl -system_wrappers_js - -# Ignore detritus left lying around by editing tools. -*~ -.#* -#*# -*.orig -*.rej - -# Ignore "compiled" python files -*.pyc -*.pyo diff --git a/js/src/config/check_source_count.py b/js/src/config/check_source_count.py deleted file mode 100755 index e347e7a55e8..00000000000 --- a/js/src/config/check_source_count.py +++ /dev/null @@ -1,57 +0,0 @@ -#!/usr/bin/env python -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - - -# Usage: check_source_count.py SEARCH_TERM COUNT ERROR_LOCATION REPLACEMENT [FILES...] -# Checks that FILES contains exactly COUNT matches of SEARCH_TERM. If it does -# not, an error message is printed, quoting ERROR_LOCATION, which should -# probably be the filename and line number of the erroneous call to -# check_source_count.py. -from __future__ import print_function -import sys -import os -import re - -search_string = sys.argv[1] -expected_count = int(sys.argv[2]) -error_location = sys.argv[3] -replacement = sys.argv[4] -files = sys.argv[5:] - -details = {} - -count = 0 -for f in files: - text = file(f).read() - match = re.findall(search_string, text) - if match: - num = len(match) - count += num - details[f] = num - -if count == expected_count: - print("TEST-PASS | check_source_count.py {0} | {1}" - .format(search_string, expected_count)) - -else: - print("TEST-UNEXPECTED-FAIL | check_source_count.py {0} | " - .format(search_string), - end='') - if count < expected_count: - print("There are fewer occurrences of /{0}/ than expected. " - "This may mean that you have removed some, but forgotten to " - "account for it {1}.".format(search_string, error_location)) - else: - print("There are more occurrences of /{0}/ than expected. We're trying " - "to prevent an increase in the number of {1}'s, using {2} if " - "possible. If it is unavoidable, you should update the expected " - "count {3}.".format(search_string, search_string, replacement, - error_location)) - - print("Expected: {0}; found: {1}".format(expected_count, count)) - for k in sorted(details): - print("Found {0} occurences in {1}".format(details[k],k)) - sys.exit(-1) - diff --git a/js/src/config/check_spidermonkey_style.py b/js/src/config/check_spidermonkey_style.py deleted file mode 100644 index f4ad12fece7..00000000000 --- a/js/src/config/check_spidermonkey_style.py +++ /dev/null @@ -1,588 +0,0 @@ -# vim: set ts=8 sts=4 et sw=4 tw=99: -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -#---------------------------------------------------------------------------- -# This script checks various aspects of SpiderMonkey code style. The current checks are as -# follows. -# -# We check the following things in headers. -# -# - No cyclic dependencies. -# -# - No normal header should #include a inlines.h/-inl.h file. -# -# - #ifndef wrappers should have the right form. (XXX: not yet implemented) -# - Every header file should have one. -# - The guard name used should be appropriate for the filename. -# -# We check the following things in all files. -# -# - #includes should have full paths, e.g. "jit/Ion.h", not "Ion.h". -# -# - #includes should use the appropriate form for system headers (<...>) and -# local headers ("..."). -# -# - #includes should be ordered correctly. -# - Each one should be in the correct section. -# - Alphabetical order should be used within sections. -# - Sections should be in the right order. -# Note that the presence of #if/#endif blocks complicates things, to the -# point that it's not always clear where a conditionally-compiled #include -# statement should go, even to a human. Therefore, we check the #include -# statements within each #if/#endif block (including nested ones) in -# isolation, but don't try to do any order checking between such blocks. -#---------------------------------------------------------------------------- - -from __future__ import print_function - -import difflib -import os -import re -import subprocess -import sys -import traceback - -# We don't bother checking files in these directories, because they're (a) auxiliary or (b) -# imported code that doesn't follow our coding style. -ignored_js_src_dirs = [ - 'js/src/config/', # auxiliary stuff - 'js/src/ctypes/libffi/', # imported code - 'js/src/devtools/', # auxiliary stuff - 'js/src/editline/', # imported code - 'js/src/gdb/', # auxiliary stuff - 'js/src/vtune/' # imported code -] - -# We ignore #includes of these files, because they don't follow the usual rules. -included_inclnames_to_ignore = set([ - 'ffi.h', # generated in ctypes/libffi/ - 'devtools/sharkctl.h', # we ignore devtools/ in general - 'devtools/Instruments.h', # we ignore devtools/ in general - 'double-conversion.h', # strange MFBT case - 'javascript-trace.h', # generated in $OBJDIR if HAVE_DTRACE is defined - 'jsautokw.h', # generated in $OBJDIR - 'jsautooplen.h', # generated in $OBJDIR - 'jscustomallocator.h', # provided by embedders; allowed to be missing - 'js-config.h', # generated in $OBJDIR - 'pratom.h', # NSPR - 'prcvar.h', # NSPR - 'prinit.h', # NSPR - 'prlink.h', # NSPR - 'prlock.h', # NSPR - 'prprf.h', # NSPR - 'prthread.h', # NSPR - 'prtypes.h', # NSPR - 'selfhosted.out.h', # generated in $OBJDIR - 'unicode/locid.h', # ICU - 'unicode/numsys.h', # ICU - 'unicode/ucal.h', # ICU - 'unicode/uclean.h', # ICU - 'unicode/ucol.h', # ICU - 'unicode/udat.h', # ICU - 'unicode/udatpg.h', # ICU - 'unicode/uenum.h', # ICU - 'unicode/unum.h', # ICU - 'unicode/ustring.h', # ICU - 'unicode/utypes.h', # ICU - 'vtune/VTuneWrapper.h' # VTune -]) - -# These files have additional constraints on where they are #included, so we -# ignore #includes of them when checking #include ordering. -oddly_ordered_inclnames = set([ - 'ctypes/typedefs.h', # Included multiple times in the body of ctypes/CTypes.h - 'jsautokw.h', # Included in the body of frontend/TokenStream.h - 'jswin.h', # Must be #included before - 'machine/endian.h', # Must be included after on BSD - 'winbase.h', # Must precede other system headers(?) - 'windef.h' # Must precede other system headers(?) -]) - -# The files in tests/style/ contain code that fails this checking in various -# ways. Here is the output we expect. If the actual output differs from -# this, one of the following must have happened. -# - New SpiderMonkey code violates one of the checked rules. -# - The tests/style/ files have changed without expected_output being changed -# accordingly. -# - This script has been broken somehow. -# -expected_output = '''\ -js/src/tests/style/BadIncludes2.h:1: error: - vanilla header includes an inline-header file "tests/style/BadIncludes2-inl.h" - -js/src/tests/style/BadIncludes.h:3: error: - the file includes itself - -js/src/tests/style/BadIncludes.h:6: error: - "BadIncludes2.h" is included using the wrong path; - did you forget a prefix, or is the file not yet committed? - -js/src/tests/style/BadIncludes.h:8: error: - should be included using - the #include "..." form - -js/src/tests/style/BadIncludes.h:10: error: - "stdio.h" is included using the wrong path; - did you forget a prefix, or is the file not yet committed? - -js/src/tests/style/BadIncludesOrder-inl.h:5:6: error: - "vm/Interpreter-inl.h" should be included after "jsscriptinlines.h" - -js/src/tests/style/BadIncludesOrder-inl.h:6:7: error: - "jsscriptinlines.h" should be included after "js/Value.h" - -js/src/tests/style/BadIncludesOrder-inl.h:7:8: error: - "js/Value.h" should be included after "ds/LifoAlloc.h" - -js/src/tests/style/BadIncludesOrder-inl.h:8:9: error: - "ds/LifoAlloc.h" should be included after "jsapi.h" - -js/src/tests/style/BadIncludesOrder-inl.h:9:10: error: - "jsapi.h" should be included after - -js/src/tests/style/BadIncludesOrder-inl.h:10:11: error: - should be included after "mozilla/HashFunctions.h" - -js/src/tests/style/BadIncludesOrder-inl.h:27:28: error: - "jsobj.h" should be included after "jsfun.h" - -(multiple files): error: - header files form one or more cycles - - tests/style/HeaderCycleA1.h - -> tests/style/HeaderCycleA2.h - -> tests/style/HeaderCycleA3.h - -> tests/style/HeaderCycleA1.h - - tests/style/HeaderCycleB1-inl.h - -> tests/style/HeaderCycleB2-inl.h - -> tests/style/HeaderCycleB3-inl.h - -> tests/style/HeaderCycleB4-inl.h - -> tests/style/HeaderCycleB1-inl.h - -> tests/style/jsheadercycleB5inlines.h - -> tests/style/HeaderCycleB1-inl.h - -> tests/style/HeaderCycleB4-inl.h - -'''.splitlines(True) - -actual_output = [] - - -def out(*lines): - for line in lines: - actual_output.append(line + '\n') - - -def error(filename, linenum, *lines): - location = filename - if linenum is not None: - location += ':' + str(linenum) - out(location + ': error:') - for line in (lines): - out(' ' + line) - out('') - - -class FileKind(object): - C = 1 - CPP = 2 - INL_H = 3 - H = 4 - TBL = 5 - MSG = 6 - - @staticmethod - def get(filename): - if filename.endswith('.c'): - return FileKind.C - - if filename.endswith('.cpp'): - return FileKind.CPP - - if filename.endswith(('inlines.h', '-inl.h', 'Inlines.h')): - return FileKind.INL_H - - if filename.endswith('.h'): - return FileKind.H - - if filename.endswith('.tbl'): - return FileKind.TBL - - if filename.endswith('.msg'): - return FileKind.MSG - - error(filename, None, 'unknown file kind') - - -def get_all_filenames(): - '''Get a list of all the files in the (Mercurial or Git) repository.''' - cmds = [['hg', 'manifest', '-q'], ['git', 'ls-files', '--full-name', '../..']] - for cmd in cmds: - try: - all_filenames = subprocess.check_output(cmd, universal_newlines=True, - stderr=subprocess.PIPE).split('\n') - return all_filenames - except: - continue - else: - raise Exception('failed to run any of the repo manifest commands', cmds) - - -def check_style(): - # We deal with two kinds of name. - # - A "filename" is a full path to a file from the repository root. - # - An "inclname" is how a file is referred to in a #include statement. - # - # Examples (filename -> inclname) - # - "mfbt/Attributes.h" -> "mozilla/Attributes.h" - # - "js/public/Vector.h" -> "js/Vector.h" - # - "js/src/vm/String.h" -> "vm/String.h" - - mfbt_inclnames = set() # type: set(inclname) - js_names = dict() # type: dict(filename, inclname) - - # Select the appropriate files. - for filename in get_all_filenames(): - if filename.startswith('mfbt/') and filename.endswith('.h'): - inclname = 'mozilla/' + filename[len('mfbt/'):] - mfbt_inclnames.add(inclname) - - if filename.startswith('js/public/') and filename.endswith('.h'): - inclname = 'js/' + filename[len('js/public/'):] - js_names[filename] = inclname - - if filename.startswith('js/src/') and \ - not filename.startswith(tuple(ignored_js_src_dirs)) and \ - filename.endswith(('.c', '.cpp', '.h', '.tbl', '.msg')): - inclname = filename[len('js/src/'):] - js_names[filename] = inclname - - all_inclnames = mfbt_inclnames | set(js_names.values()) - - edges = dict() # type: dict(inclname, set(inclname)) - - # We don't care what's inside the MFBT files, but because they are - # #included from JS files we have to add them to the inclusion graph. - for inclname in mfbt_inclnames: - edges[inclname] = set() - - # Process all the JS files. - for filename in js_names.keys(): - inclname = js_names[filename] - file_kind = FileKind.get(filename) - if file_kind == FileKind.C or file_kind == FileKind.CPP or \ - file_kind == FileKind.H or file_kind == FileKind.INL_H: - included_h_inclnames = set() # type: set(inclname) - - # This script is run in js/src/, so prepend '../../' to get to the root of the Mozilla - # source tree. - with open(os.path.join('../..', filename)) as f: - do_file(filename, inclname, file_kind, f, all_inclnames, included_h_inclnames) - - edges[inclname] = included_h_inclnames - - find_cycles(all_inclnames, edges) - - # Compare expected and actual output. - difflines = difflib.unified_diff(expected_output, actual_output, - fromfile='check_spider_monkey_style.py expected output', - tofile='check_spider_monkey_style.py actual output') - ok = True - for diffline in difflines: - ok = False - print(diffline, end='') - - return ok - - -def module_name(name): - '''Strip the trailing .cpp, .h, inlines.h or -inl.h from a filename.''' - - return name.replace('inlines.h', '').replace('-inl.h', '').replace('.h', '').replace('.cpp', '') - - -def is_module_header(enclosing_inclname, header_inclname): - '''Determine if an included name is the "module header", i.e. should be - first in the file.''' - - module = module_name(enclosing_inclname) - - # Normal case, e.g. module == "foo/Bar", header_inclname == "foo/Bar.h". - if module == module_name(header_inclname): - return True - - # A public header, e.g. module == "foo/Bar", header_inclname == "js/Bar.h". - m = re.match(r'js\/(.*)\.h', header_inclname) - if m is not None and module.endswith('/' + m.group(1)): - return True - - return False - - -class Include(object): - '''Important information for a single #include statement.''' - - def __init__(self, inclname, linenum, is_system): - self.inclname = inclname - self.linenum = linenum - self.is_system = is_system - - def isLeaf(self): - return True - - def section(self, enclosing_inclname): - '''Identify which section inclname belongs to. - - The section numbers are as follows. - 0. Module header (e.g. jsfoo.h or jsfooinlines.h within jsfoo.cpp) - 1. mozilla/Foo.h - 2. or - 3. jsfoo.h, prmjtime.h, etc - 4. foo/Bar.h - 5. jsfooinlines.h - 6. foo/Bar-inl.h - 7. non-.h, e.g. *.tbl, *.msg - ''' - - if self.is_system: - return 2 - - if not self.inclname.endswith('.h'): - return 7 - - # A couple of modules have the .h file in js/ and the .cpp file elsewhere and so need - # special handling. - if is_module_header(enclosing_inclname, self.inclname): - return 0 - - if '/' in self.inclname: - if self.inclname.startswith('mozilla/'): - return 1 - - if self.inclname.endswith('-inl.h'): - return 6 - - return 4 - - if self.inclname.endswith('inlines.h'): - return 5 - - return 3 - - def quote(self): - if self.is_system: - return '<' + self.inclname + '>' - else: - return '"' + self.inclname + '"' - - -class HashIfBlock(object): - '''Important information about a #if/#endif block. - - A #if/#endif block is the contents of a #if/#endif (or similar) section. - The top-level block, which is not within a #if/#endif pair, is also - considered a block. - - Each leaf is either an Include (representing a #include), or another - nested HashIfBlock.''' - def __init__(self): - self.kids = [] - - def isLeaf(self): - return False - - -def do_file(filename, inclname, file_kind, f, all_inclnames, included_h_inclnames): - block_stack = [HashIfBlock()] - - # Extract the #include statements as a tree of IBlocks and IIncludes. - for linenum, line in enumerate(f, start=1): - # Look for a |#include "..."| line. - m = re.match(r'\s*#\s*include\s+"([^"]*)"', line) - if m is not None: - block_stack[-1].kids.append(Include(m.group(1), linenum, False)) - - # Look for a |#include <...>| line. - m = re.match(r'\s*#\s*include\s+<([^>]*)>', line) - if m is not None: - block_stack[-1].kids.append(Include(m.group(1), linenum, True)) - - # Look for a |#{if,ifdef,ifndef}| line. - m = re.match(r'\s*#\s*(if|ifdef|ifndef)\b', line) - if m is not None: - # Open a new block. - new_block = HashIfBlock() - block_stack[-1].kids.append(new_block) - block_stack.append(new_block) - - # Look for a |#{elif,else}| line. - m = re.match(r'\s*#\s*(elif|else)\b', line) - if m is not None: - # Close the current block, and open an adjacent one. - block_stack.pop() - new_block = HashIfBlock() - block_stack[-1].kids.append(new_block) - block_stack.append(new_block) - - # Look for a |#endif| line. - m = re.match(r'\s*#\s*endif\b', line) - if m is not None: - # Close the current block. - block_stack.pop() - - def check_include_statement(include): - '''Check the style of a single #include statement.''' - - if include.is_system: - # Check it is not a known local file (in which case it's probably a system header). - if include.inclname in included_inclnames_to_ignore or \ - include.inclname in all_inclnames: - error(filename, include.linenum, - include.quote() + ' should be included using', - 'the #include "..." form') - - else: - if include.inclname not in included_inclnames_to_ignore: - included_kind = FileKind.get(include.inclname) - - # Check the #include path has the correct form. - if include.inclname not in all_inclnames: - error(filename, include.linenum, - include.quote() + ' is included ' + 'using the wrong path;', - 'did you forget a prefix, or is the file not yet committed?') - - # Record inclusions of .h files for cycle detection later. - # (Exclude .tbl and .msg files.) - elif included_kind == FileKind.H or included_kind == FileKind.INL_H: - included_h_inclnames.add(include.inclname) - - # Check a H file doesn't #include an INL_H file. - if file_kind == FileKind.H and included_kind == FileKind.INL_H: - error(filename, include.linenum, - 'vanilla header includes an inline-header file ' + include.quote()) - - # Check a file doesn't #include itself. (We do this here because the cycle - # detection below doesn't detect this case.) - if inclname == include.inclname: - error(filename, include.linenum, 'the file includes itself') - - def check_includes_order(include1, include2): - '''Check the ordering of two #include statements.''' - - if include1.inclname in oddly_ordered_inclnames or \ - include2.inclname in oddly_ordered_inclnames: - return - - section1 = include1.section(inclname) - section2 = include2.section(inclname) - if (section1 > section2) or \ - ((section1 == section2) and (include1.inclname.lower() > include2.inclname.lower())): - error(filename, str(include1.linenum) + ':' + str(include2.linenum), - include1.quote() + ' should be included after ' + include2.quote()) - - # The #include statements in the files in assembler/ and yarr/ have all manner of implicit - # ordering requirements. Boo. Ignore them. - skip_order_checking = inclname.startswith(('assembler/', 'yarr/')) - - # Check the extracted #include statements, both individually, and the ordering of - # adjacent pairs that live in the same block. - def pair_traverse(prev, this): - if this.isLeaf(): - check_include_statement(this) - if prev is not None and prev.isLeaf() and not skip_order_checking: - check_includes_order(prev, this) - else: - for prev2, this2 in zip([None] + this.kids[0:-1], this.kids): - pair_traverse(prev2, this2) - - pair_traverse(None, block_stack[-1]) - - -def find_cycles(all_inclnames, edges): - '''Find and draw any cycles.''' - - SCCs = tarjan(all_inclnames, edges) - - # The various sorted() calls below ensure the output is deterministic. - - def draw_SCC(c): - cset = set(c) - drawn = set() - def draw(v, indent): - out(' ' * indent + ('-> ' if indent else ' ') + v) - if v in drawn: - return - drawn.add(v) - for succ in sorted(edges[v]): - if succ in cset: - draw(succ, indent + 1) - draw(sorted(c)[0], 0) - out('') - - have_drawn_an_SCC = False - for scc in sorted(SCCs): - if len(scc) != 1: - if not have_drawn_an_SCC: - error('(multiple files)', None, 'header files form one or more cycles') - have_drawn_an_SCC = True - - draw_SCC(scc) - - -# Tarjan's algorithm for finding the strongly connected components (SCCs) of a graph. -# https://en.wikipedia.org/wiki/Tarjan%27s_strongly_connected_components_algorithm -def tarjan(V, E): - vertex_index = {} - vertex_lowlink = {} - index = 0 - S = [] - all_SCCs = [] - - def strongconnect(v, index): - # Set the depth index for v to the smallest unused index - vertex_index[v] = index - vertex_lowlink[v] = index - index += 1 - S.append(v) - - # Consider successors of v - for w in E[v]: - if w not in vertex_index: - # Successor w has not yet been visited; recurse on it - index = strongconnect(w, index) - vertex_lowlink[v] = min(vertex_lowlink[v], vertex_lowlink[w]) - elif w in S: - # Successor w is in stack S and hence in the current SCC - vertex_lowlink[v] = min(vertex_lowlink[v], vertex_index[w]) - - # If v is a root node, pop the stack and generate an SCC - if vertex_lowlink[v] == vertex_index[v]: - i = S.index(v) - scc = S[i:] - del S[i:] - all_SCCs.append(scc) - - return index - - for v in V: - if v not in vertex_index: - index = strongconnect(v, index) - - return all_SCCs - - -def main(): - ok = check_style() - - if ok: - print('TEST-PASS | check_spidermonkey_style.py | ok') - else: - print('TEST-UNEXPECTED-FAIL | check_spidermonkey_style.py | actual output does not match expected output; diff is above') - - sys.exit(0 if ok else 1) - - -if __name__ == '__main__': - main() diff --git a/js/src/config/check_vanilla_allocations.py b/js/src/config/check_vanilla_allocations.py deleted file mode 100644 index 74ea5e61d0c..00000000000 --- a/js/src/config/check_vanilla_allocations.py +++ /dev/null @@ -1,159 +0,0 @@ -# vim: set ts=8 sts=4 et sw=4 tw=79: -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -#---------------------------------------------------------------------------- -# All heap allocations in SpiderMonkey must go through js_malloc, js_calloc, -# js_realloc, and js_free. This is so that any embedder who uses a custom -# allocator (by defining JS_USE_CUSTOM_ALLOCATOR) will see all heap allocation -# go through that custom allocator. -# -# Therefore, the presence of any calls to "vanilla" allocation/free functions -# (e.g. malloc(), free()) is a bug. -# -# This script checks for the presence of such disallowed vanilla -# allocation/free function in SpiderMonkey when it's built as a library. It -# relies on |nm| from the GNU binutils, and so only works on Linux, but one -# platform is good enough to catch almost all violations. -# -# This checking is only 100% reliable in a JS_USE_CUSTOM_ALLOCATOR build in -# which the default definitions of js_malloc et al (in Utility.h) -- which call -# malloc et al -- are replaced with empty definitions. This is because the -# presence and possible inlining of the default js_malloc et al can cause -# malloc/calloc/realloc/free calls show up in unpredictable places. -# -# Unfortunately, that configuration cannot be tested on Mozilla's standard -# testing infrastructure. Instead, by default this script only tests that none -# of the other vanilla allocation/free functions (operator new, memalign, etc) -# are present. If given the --aggressive flag, it will also check for -# malloc/calloc/realloc/free. -# -# Note: We don't check for |operator delete| and |operator delete[]|. These -# can be present somehow due to virtual destructors, but this is not too -# because vanilla delete/delete[] calls don't make sense without corresponding -# vanilla new/new[] calls, and any explicit calls will be caught by Valgrind's -# mismatched alloc/free checking. -#---------------------------------------------------------------------------- - -from __future__ import print_function - -import argparse -import re -import subprocess -import sys - -# The obvious way to implement this script is to search for occurrences of -# malloc et al, succeed if none are found, and fail is some are found. -# However, "none are found" does not necessarily mean "none are present" -- -# this script could be buggy. (Or the output format of |nm| might change in -# the future.) -# -# So jsutil.cpp deliberately contains a (never-called) function that contains a -# single use of all the vanilla allocation/free functions. And this script -# fails if it (a) finds uses of those functions in files other than jsutil.cpp, -# *or* (b) fails to find them in jsutil.cpp. - -# Tracks overall success of the test. -has_failed = False - - -def fail(msg): - print('TEST-UNEXPECTED-FAIL | check_vanilla_allocations.py |', msg) - global has_failed - has_failed = True - - -def main(): - parser = argparse.ArgumentParser() - parser.add_argument('--aggressive', action='store_true', - help='also check for malloc, calloc, realloc and free') - parser.add_argument('file', type=str, - help='name of the file to check') - args = parser.parse_args() - - # Run |nm|. Options: - # -u: show only undefined symbols - # -C: demangle symbol names - # -l: show a filename and line number for each undefined symbol - cmd = ['nm', '-u', '-C', '-l', args.file] - lines = subprocess.check_output(cmd, universal_newlines=True, - stderr=subprocess.PIPE).split('\n') - - # alloc_fns contains all the vanilla allocation/free functions that we look - # for. Regexp chars are escaped appropriately. - - alloc_fns = [ - # Matches |operator new(unsigned T)|, where |T| is |int| or |long|. - r'operator new\(unsigned', - - # Matches |operator new[](unsigned T)|, where |T| is |int| or |long|. - r'operator new\[\]\(unsigned', - - r'memalign', - # These two aren't available on all Linux configurations. - #r'posix_memalign', - #r'aligned_alloc', - r'valloc', - r'strdup' - ] - - if args.aggressive: - alloc_fns += [ - r'malloc', - r'calloc', - r'realloc', - r'free' - ] - - # This is like alloc_fns, but regexp chars are not escaped. - alloc_fns_unescaped = [fn.translate(None, r'\\') for fn in alloc_fns] - - # This regexp matches the relevant lines in the output of |nm|, which look - # like the following. - # - # U malloc /path/to/objdir/dist/include/js/Utility.h:142 - # - alloc_fns_re = r'U (' + r'|'.join(alloc_fns) + r').*\/([\w\.]+):(\d+)$' - - # This tracks which allocation/free functions have been seen in jsutil.cpp. - jsutil_cpp = set([]) - - for line in lines: - m = re.search(alloc_fns_re, line) - if m is None: - continue - - fn = m.group(1) - filename = m.group(2) - linenum = m.group(3) - if filename == 'jsutil.cpp': - jsutil_cpp.add(fn) - else: - # An allocation is present in a non-special file. Fail! - fail("'" + fn + "' present at " + filename + ':' + linenum) - - - # Check that all functions we expect are used in jsutil.cpp. (This will - # fail if the function-detection code breaks at any point.) - for fn in alloc_fns_unescaped: - if fn not in jsutil_cpp: - fail("'" + fn + "' isn't used as expected in jsutil.cpp") - else: - jsutil_cpp.remove(fn) - - # This should never happen, but check just in case. - if jsutil_cpp: - fail('unexpected allocation fns used in jsutil.cpp: ' + - ', '.join(jsutil_cpp)) - - if has_failed: - sys.exit(1) - - print('TEST-PASS | check_vanilla_allocations.py | ok') - sys.exit(0) - - -if __name__ == '__main__': - main() - diff --git a/js/src/config/config.mk b/js/src/config/config.mk deleted file mode 100644 index f405445ebfd..00000000000 --- a/js/src/config/config.mk +++ /dev/null @@ -1,910 +0,0 @@ -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# -# config.mk -# -# Determines the platform and builds the macros needed to load the -# appropriate platform-specific .mk file, then defines all (most?) -# of the generic macros. -# - -# Define an include-at-most-once flag -ifdef INCLUDED_CONFIG_MK -$(error Do not include config.mk twice!) -endif -INCLUDED_CONFIG_MK = 1 - -EXIT_ON_ERROR = set -e; # Shell loops continue past errors without this. - -ifndef topsrcdir -topsrcdir = $(DEPTH) -endif - -ifndef INCLUDED_AUTOCONF_MK -include $(DEPTH)/config/autoconf.mk -endif - --include $(DEPTH)/.mozconfig.mk - -# Integrate with mozbuild-generated make files. We first verify that no -# variables provided by the automatically generated .mk files are -# present. If they are, this is a violation of the separation of -# responsibility between Makefile.in and mozbuild files. -_MOZBUILD_EXTERNAL_VARIABLES := \ - ANDROID_GENERATED_RESFILES \ - ANDROID_RES_DIRS \ - CMSRCS \ - CMMSRCS \ - CPP_UNIT_TESTS \ - DIRS \ - EXTRA_PP_COMPONENTS \ - EXTRA_PP_JS_MODULES \ - FORCE_SHARED_LIB \ - FORCE_STATIC_LIB \ - FINAL_LIBRARY \ - HOST_CSRCS \ - HOST_CMMSRCS \ - HOST_LIBRARY_NAME \ - HOST_PROGRAM \ - HOST_SIMPLE_PROGRAMS \ - IS_COMPONENT \ - JAR_MANIFEST \ - JAVA_JAR_TARGETS \ - JS_MODULES_PATH \ - LIBRARY_NAME \ - LIBXUL_LIBRARY \ - MODULE \ - MSVC_ENABLE_PGO \ - NO_DIST_INSTALL \ - PARALLEL_DIRS \ - PROGRAM \ - SDK_HEADERS \ - SIMPLE_PROGRAMS \ - TEST_DIRS \ - TIERS \ - TOOL_DIRS \ - XPCSHELL_TESTS \ - XPIDL_MODULE \ - $(NULL) - -_DEPRECATED_VARIABLES := \ - ANDROID_RESFILES \ - MOCHITEST_FILES_PARTS \ - MOCHITEST_BROWSER_FILES_PARTS \ - SHORT_LIBNAME \ - $(NULL) - -ifndef EXTERNALLY_MANAGED_MAKE_FILE -# Using $(firstword) may not be perfect. But it should be good enough for most -# scenarios. -_current_makefile = $(CURDIR)/$(firstword $(MAKEFILE_LIST)) - -$(foreach var,$(_MOZBUILD_EXTERNAL_VARIABLES),$(if $(filter file override,$(subst $(NULL) ,_,$(origin $(var)))),\ - $(error Variable $(var) is defined in $(_current_makefile). It should only be defined in moz.build files),\ - )) - -$(foreach var,$(_DEPRECATED_VARIABLES),$(if $(filter file override,$(subst $(NULL) ,_,$(origin $(var)))),\ - $(error Variable $(var) is defined in $(_current_makefile). This variable has been deprecated. It does nothing. It must be removed in order to build)\ - )) - -# Import the automatically generated backend file. If this file doesn't exist, -# the backend hasn't been properly configured. We want this to be a fatal -# error, hence not using "-include". -ifndef STANDALONE_MAKEFILE -GLOBAL_DEPS += backend.mk -include backend.mk -endif - -# Freeze the values specified by moz.build to catch them if they fail. - -$(foreach var,$(_MOZBUILD_EXTERNAL_VARIABLES),$(eval $(var)_FROZEN := '$($(var))')) -$(foreach var,$(_DEPRECATED_VARIABLES),$(eval $(var)_FROZEN := '$($(var))')) - -CHECK_MOZBUILD_VARIABLES = $(foreach var,$(_MOZBUILD_EXTERNAL_VARIABLES), \ - $(if $(subst $($(var)_FROZEN),,'$($(var))'), \ - $(error Variable $(var) is defined in $(_current_makefile). It should only be defined in moz.build files),\ - )) $(foreach var,$(_DEPRECATED_VARIABLES), \ - $(if $(subst $($(var)_FROZEN),,'$($(var))'), \ - $(error Variable $(var) is defined in $(_current_makefile). This variable has been deprecated. It does nothing. It must be removed in order to build),\ - )) - -endif - -space = $(NULL) $(NULL) - -# Include defs.mk files that can be found in $(srcdir)/$(DEPTH), -# $(srcdir)/$(DEPTH-1), $(srcdir)/$(DEPTH-2), etc., and $(srcdir) -# where $(DEPTH-1) is one level less of depth, $(DEPTH-2), two, etc. -# i.e. for DEPTH=../../.., DEPTH-1 is ../.. and DEPTH-2 is .. -# These defs.mk files are used to define variables in a directory -# and all its subdirectories, recursively. -__depth := $(subst /, ,$(DEPTH)) -ifeq (.,$(__depth)) -__depth := -endif -$(foreach __d,$(__depth) .,$(eval __depth = $(wordlist 2,$(words $(__depth)),$(__depth))$(eval -include $(subst $(space),/,$(strip $(srcdir) $(__depth) defs.mk))))) - -COMMA = , - -# Sanity check some variables -CHECK_VARS := \ - XPI_NAME \ - LIBRARY_NAME \ - MODULE \ - DEPTH \ - XPI_PKGNAME \ - INSTALL_EXTENSION_ID \ - SHARED_LIBRARY_NAME \ - STATIC_LIBRARY_NAME \ - $(NULL) - -# checks for internal spaces or trailing spaces in the variable -# named by $x -check-variable = $(if $(filter-out 0 1,$(words $($(x))z)),$(error Spaces are not allowed in $(x))) - -$(foreach x,$(CHECK_VARS),$(check-variable)) - -ifndef INCLUDED_FUNCTIONS_MK -include $(topsrcdir)/config/makefiles/functions.mk -endif - -RM = rm -f - -# LIBXUL_DIST is not defined under js/src, thus we make it mean DIST there. -LIBXUL_DIST ?= $(DIST) - -# FINAL_TARGET specifies the location into which we copy end-user-shipped -# build products (typelibs, components, chrome). It may already be specified by -# a moz.build file. -# -# If XPI_NAME is set, the files will be shipped to $(DIST)/xpi-stage/$(XPI_NAME) -# instead of $(DIST)/bin. In both cases, if DIST_SUBDIR is set, the files will be -# shipped to a $(DIST_SUBDIR) subdirectory. -FINAL_TARGET ?= $(if $(XPI_NAME),$(DIST)/xpi-stage/$(XPI_NAME),$(DIST)/bin)$(DIST_SUBDIR:%=/%) -# Override the stored value for the check to make sure that the variable is not -# redefined in the Makefile.in value. -FINAL_TARGET_FROZEN := '$(FINAL_TARGET)' - -ifdef XPI_NAME -DEFINES += -DXPI_NAME=$(XPI_NAME) -endif - -# The VERSION_NUMBER is suffixed onto the end of the DLLs we ship. -VERSION_NUMBER = 50 - -ifeq ($(HOST_OS_ARCH),WINNT) -win_srcdir := $(subst $(topsrcdir),$(WIN_TOP_SRC),$(srcdir)) -BUILD_TOOLS = $(WIN_TOP_SRC)/build/unix -else -win_srcdir := $(srcdir) -BUILD_TOOLS = $(topsrcdir)/build/unix -endif - -CONFIG_TOOLS = $(MOZ_BUILD_ROOT)/config -AUTOCONF_TOOLS = $(topsrcdir)/build/autoconf - -# Disable MOZ_PSEUDO_DERECURSE when it contains no-pymake and we're running -# pymake. This can be removed when no-pymake is removed from the default in -# build/autoconf/compiler-opts.m4. -ifdef .PYMAKE -comma = , -ifneq (,$(filter no-pymake,$(subst $(comma), ,$(MOZ_PSEUDO_DERECURSE)))) -MOZ_PSEUDO_DERECURSE := -endif -endif - -# Disable MOZ_PSEUDO_DERECURSE on PGO builds until it's fixed. -ifneq (,$(MOZ_PROFILE_USE)$(MOZ_PROFILE_GENERATE)) -MOZ_PSEUDO_DERECURSE := -endif - -# -# Strip off the excessively long version numbers on these platforms, -# but save the version to allow multiple versions of the same base -# platform to be built in the same tree. -# -ifneq (,$(filter FreeBSD HP-UX Linux NetBSD OpenBSD SunOS,$(OS_ARCH))) -OS_RELEASE := $(basename $(OS_RELEASE)) - -# Allow the user to ignore the OS_VERSION, which is usually irrelevant. -ifdef WANT_MOZILLA_CONFIG_OS_VERSION -OS_VERS := $(suffix $(OS_RELEASE)) -OS_VERSION := $(shell echo $(OS_VERS) | sed 's/-.*//') -endif - -endif - -OS_CONFIG := $(OS_ARCH)$(OS_RELEASE) - -ifdef _MSC_VER -CC_WRAPPER ?= $(call py_action,cl) -CXX_WRAPPER ?= $(call py_action,cl) -endif # _MSC_VER - -CC := $(CC_WRAPPER) $(CC) -CXX := $(CXX_WRAPPER) $(CXX) -MKDIR ?= mkdir -SLEEP ?= sleep -TOUCH ?= touch - -ifdef .PYMAKE -PYCOMMANDPATH += $(PYTHON_SITE_PACKAGES) -endif - -PYTHON_PATH = $(PYTHON) $(topsrcdir)/config/pythonpath.py - -# determine debug-related options -_DEBUG_ASFLAGS := -_DEBUG_CFLAGS := -_DEBUG_LDFLAGS := - -ifdef MOZ_DEBUG - _DEBUG_CFLAGS += $(MOZ_DEBUG_ENABLE_DEFS) - XULPPFLAGS += $(MOZ_DEBUG_ENABLE_DEFS) -else - _DEBUG_CFLAGS += $(MOZ_DEBUG_DISABLE_DEFS) - XULPPFLAGS += $(MOZ_DEBUG_DISABLE_DEFS) -endif - -ifneq (,$(MOZ_DEBUG)$(MOZ_DEBUG_SYMBOLS)) - ifeq ($(AS),yasm) - ifeq ($(OS_ARCH)_$(GNU_CC),WINNT_) - _DEBUG_ASFLAGS += -g cv8 - else - ifneq ($(OS_ARCH),Darwin) - _DEBUG_ASFLAGS += -g dwarf2 - endif - endif - else - _DEBUG_ASFLAGS += $(MOZ_DEBUG_FLAGS) - endif - _DEBUG_CFLAGS += $(MOZ_DEBUG_FLAGS) - _DEBUG_LDFLAGS += $(MOZ_DEBUG_LDFLAGS) -endif - -MOZALLOC_LIB = $(call EXPAND_LIBNAME_PATH,mozalloc,$(DIST)/lib) - -ASFLAGS += $(_DEBUG_ASFLAGS) -OS_CFLAGS += $(_DEBUG_CFLAGS) -OS_CXXFLAGS += $(_DEBUG_CFLAGS) -OS_LDFLAGS += $(_DEBUG_LDFLAGS) - -# XXX: What does this? Bug 482434 filed for better explanation. -ifeq ($(OS_ARCH)_$(GNU_CC),WINNT_) -ifdef MOZ_DEBUG -ifneq (,$(MOZ_BROWSE_INFO)$(MOZ_BSCFILE)) -OS_CFLAGS += -FR -OS_CXXFLAGS += -FR -endif -else # ! MOZ_DEBUG - -# MOZ_DEBUG_SYMBOLS generates debug symbols in separate PDB files. -# Used for generating an optimized build with debugging symbols. -# Used in the Windows nightlies to generate symbols for crash reporting. -ifdef MOZ_DEBUG_SYMBOLS -OS_CXXFLAGS += -UDEBUG -DNDEBUG -OS_CFLAGS += -UDEBUG -DNDEBUG -ifdef HAVE_64BIT_OS -OS_LDFLAGS += -DEBUG -OPT:REF,ICF -else -OS_LDFLAGS += -DEBUG -OPT:REF -endif -endif - -# -# Handle trace-malloc and DMD in optimized builds. -# No opt to give sane callstacks. -# -ifneq (,$(NS_TRACE_MALLOC)$(MOZ_DMD)) -MOZ_OPTIMIZE_FLAGS=-Zi -Od -UDEBUG -DNDEBUG -ifdef HAVE_64BIT_OS -OS_LDFLAGS = -DEBUG -OPT:REF,ICF -else -OS_LDFLAGS = -DEBUG -OPT:REF -endif -endif # NS_TRACE_MALLOC || MOZ_DMD - -endif # MOZ_DEBUG - -# We don't build a static CRT when building a custom CRT, -# it appears to be broken. So don't link to jemalloc if -# the Makefile wants static CRT linking. -ifeq ($(MOZ_MEMORY)_$(USE_STATIC_LIBS),1_1) -# Disable default CRT libs and add the right lib path for the linker -MOZ_GLUE_LDFLAGS= -endif - -endif # WINNT && !GNU_CC - -ifdef MOZ_GLUE_PROGRAM_LDFLAGS -DEFINES += -DMOZ_GLUE_IN_PROGRAM -else -MOZ_GLUE_PROGRAM_LDFLAGS=$(MOZ_GLUE_LDFLAGS) -endif - -# -# Build using PIC by default -# -_ENABLE_PIC=1 - -# Determine if module being compiled is destined -# to be merged into libxul - -ifeq ($(FINAL_LIBRARY),xul) - ifdef LIBXUL_LIBRARY - $(error FINAL_LIBRARY is "xul", LIBXUL_LIBRARY is implied) - endif - LIBXUL_LIBRARY := 1 -endif - -ifdef LIBXUL_LIBRARY -ifdef IS_COMPONENT -$(error IS_COMPONENT is set, but is not compatible with LIBXUL_LIBRARY) -endif -FORCE_STATIC_LIB=1 -endif - -# If we are building this component into an extension/xulapp, it cannot be -# statically linked. In the future we may want to add a xulapp meta-component -# build option. - -ifdef XPI_NAME -ifdef IS_COMPONENT -EXPORT_LIBRARY= -FORCE_STATIC_LIB= -FORCE_SHARED_LIB=1 -endif -endif - -ifndef SHARED_LIBRARY_NAME -ifdef LIBRARY_NAME -SHARED_LIBRARY_NAME=$(LIBRARY_NAME) -endif -endif - -ifndef STATIC_LIBRARY_NAME -ifdef LIBRARY_NAME -STATIC_LIBRARY_NAME=$(LIBRARY_NAME) -endif -endif - -# PGO on MSVC is opt-in -ifdef _MSC_VER -ifndef MSVC_ENABLE_PGO -NO_PROFILE_GUIDED_OPTIMIZE = 1 -endif -endif - -# No sense in profiling tools -ifdef INTERNAL_TOOLS -NO_PROFILE_GUIDED_OPTIMIZE = 1 -endif - -# Don't build SIMPLE_PROGRAMS with PGO, since they don't need it anyway, -# and we don't have the same build logic to re-link them in the second pass. -ifdef SIMPLE_PROGRAMS -NO_PROFILE_GUIDED_OPTIMIZE = 1 -endif - -# No sense in profiling unit tests -ifdef CPP_UNIT_TESTS -NO_PROFILE_GUIDED_OPTIMIZE = 1 -endif - -# Enable profile-based feedback -ifneq (1,$(NO_PROFILE_GUIDED_OPTIMIZE)) -ifdef MOZ_PROFILE_GENERATE -OS_CFLAGS += $(if $(filter $(notdir $<),$(notdir $(NO_PROFILE_GUIDED_OPTIMIZE))),,$(PROFILE_GEN_CFLAGS)) -OS_CXXFLAGS += $(if $(filter $(notdir $<),$(notdir $(NO_PROFILE_GUIDED_OPTIMIZE))),,$(PROFILE_GEN_CFLAGS)) -OS_LDFLAGS += $(PROFILE_GEN_LDFLAGS) -ifeq (WINNT,$(OS_ARCH)) -AR_FLAGS += -LTCG -endif -endif # MOZ_PROFILE_GENERATE - -ifdef MOZ_PROFILE_USE -OS_CFLAGS += $(if $(filter $(notdir $<),$(notdir $(NO_PROFILE_GUIDED_OPTIMIZE))),,$(PROFILE_USE_CFLAGS)) -OS_CXXFLAGS += $(if $(filter $(notdir $<),$(notdir $(NO_PROFILE_GUIDED_OPTIMIZE))),,$(PROFILE_USE_CFLAGS)) -OS_LDFLAGS += $(PROFILE_USE_LDFLAGS) -ifeq (WINNT,$(OS_ARCH)) -AR_FLAGS += -LTCG -endif -endif # MOZ_PROFILE_USE -endif # NO_PROFILE_GUIDED_OPTIMIZE - - -# Does the makefile specifies the internal XPCOM API linkage? -ifneq (,$(MOZILLA_INTERNAL_API)$(LIBXUL_LIBRARY)) -DEFINES += -DMOZILLA_INTERNAL_API -endif - -# Force XPCOM/widget/gfx methods to be _declspec(dllexport) when we're -# building libxul libraries -ifdef LIBXUL_LIBRARY -DEFINES += \ - -DIMPL_LIBXUL \ - $(NULL) - -ifndef JS_SHARED_LIBRARY -DEFINES += -DSTATIC_EXPORTABLE_JS_API -endif -endif - -MAKE_JARS_FLAGS = \ - -t $(topsrcdir) \ - -f $(MOZ_CHROME_FILE_FORMAT) \ - $(NULL) - -ifdef USE_EXTENSION_MANIFEST -MAKE_JARS_FLAGS += -e -endif - -TAR_CREATE_FLAGS = -chf - -ifeq ($(OS_ARCH),OS2) -TAR_CREATE_FLAGS = -cf -endif - -# -# Personal makefile customizations go in these optional make include files. -# -MY_CONFIG := $(DEPTH)/config/myconfig.mk -MY_RULES := $(DEPTH)/config/myrules.mk - -# -# Default command macros; can be overridden in .mk. -# -CCC = $(CXX) - -# Java macros -JAVA_GEN_DIR = _javagen -JAVA_DIST_DIR = $(DEPTH)/$(JAVA_GEN_DIR) -JAVA_IFACES_PKG_NAME = org/mozilla/interfaces - -OS_INCLUDES += $(MOZ_JPEG_CFLAGS) $(MOZ_PNG_CFLAGS) $(MOZ_ZLIB_CFLAGS) $(MOZ_PIXMAN_CFLAGS) - -# NSPR_CFLAGS and NSS_CFLAGS must appear ahead of OS_INCLUDES to avoid Linux -# builds wrongly picking up system NSPR/NSS header files. -INCLUDES = \ - -I$(srcdir) \ - -I. \ - $(LOCAL_INCLUDES) \ - -I$(DIST)/include \ - $(if $(LIBXUL_SDK),-I$(LIBXUL_SDK)/include) \ - $(NSPR_CFLAGS) $(NSS_CFLAGS) \ - $(OS_INCLUDES) \ - $(NULL) - -include $(topsrcdir)/config/static-checking-config.mk - -CFLAGS = $(OS_CPPFLAGS) $(OS_CFLAGS) -CXXFLAGS = $(OS_CPPFLAGS) $(OS_CXXFLAGS) -LDFLAGS = $(OS_LDFLAGS) $(MOZ_FIX_LINK_PATHS) - -# Allow each module to override the *default* optimization settings -# by setting MODULE_OPTIMIZE_FLAGS if the developer has not given -# arguments to --enable-optimize -ifdef MOZ_OPTIMIZE -ifeq (1,$(MOZ_OPTIMIZE)) -ifdef MODULE_OPTIMIZE_FLAGS -CFLAGS += $(MODULE_OPTIMIZE_FLAGS) -CXXFLAGS += $(MODULE_OPTIMIZE_FLAGS) -else -ifneq (,$(if $(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE),$(MOZ_PGO_OPTIMIZE_FLAGS))) -CFLAGS += $(MOZ_PGO_OPTIMIZE_FLAGS) -CXXFLAGS += $(MOZ_PGO_OPTIMIZE_FLAGS) -else -CFLAGS += $(MOZ_OPTIMIZE_FLAGS) -CXXFLAGS += $(MOZ_OPTIMIZE_FLAGS) -endif # neq (,$(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE)) -endif # MODULE_OPTIMIZE_FLAGS -else -CFLAGS += $(MOZ_OPTIMIZE_FLAGS) -CXXFLAGS += $(MOZ_OPTIMIZE_FLAGS) -endif # MOZ_OPTIMIZE == 1 -LDFLAGS += $(MOZ_OPTIMIZE_LDFLAGS) -endif # MOZ_OPTIMIZE - -ifdef CROSS_COMPILE -HOST_CFLAGS += $(HOST_OPTIMIZE_FLAGS) -else -ifdef MOZ_OPTIMIZE -ifeq (1,$(MOZ_OPTIMIZE)) -ifdef MODULE_OPTIMIZE_FLAGS -HOST_CFLAGS += $(MODULE_OPTIMIZE_FLAGS) -else -HOST_CFLAGS += $(MOZ_OPTIMIZE_FLAGS) -endif # MODULE_OPTIMIZE_FLAGS -else -HOST_CFLAGS += $(MOZ_OPTIMIZE_FLAGS) -endif # MOZ_OPTIMIZE == 1 -endif # MOZ_OPTIMIZE -endif # CROSS_COMPILE - -CFLAGS += $(MOZ_FRAMEPTR_FLAGS) -CXXFLAGS += $(MOZ_FRAMEPTR_FLAGS) - -# Check for FAIL_ON_WARNINGS & FAIL_ON_WARNINGS_DEBUG (Shorthand for Makefiles -# to request that we use the 'warnings as errors' compile flags) - -# NOTE: First, we clear FAIL_ON_WARNINGS[_DEBUG] if we're doing a Windows PGO -# build, since WARNINGS_AS_ERRORS has been suspected of causing isuses in that -# situation. (See bug 437002.) -ifeq (WINNT_1,$(OS_ARCH)_$(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE)) -FAIL_ON_WARNINGS_DEBUG= -FAIL_ON_WARNINGS= -endif # WINNT && (MOS_PROFILE_GENERATE ^ MOZ_PROFILE_USE) - -# Now, check for debug version of flag; it turns on normal flag in debug builds. -ifdef FAIL_ON_WARNINGS_DEBUG -ifdef MOZ_DEBUG -FAIL_ON_WARNINGS = 1 -endif # MOZ_DEBUG -endif # FAIL_ON_WARNINGS_DEBUG - -# Check for normal version of flag, and add WARNINGS_AS_ERRORS if it's set to 1. -ifdef FAIL_ON_WARNINGS -CXXFLAGS += $(WARNINGS_AS_ERRORS) -CFLAGS += $(WARNINGS_AS_ERRORS) -endif # FAIL_ON_WARNINGS - -ifeq ($(OS_ARCH)_$(GNU_CC),WINNT_) -#// Currently, unless USE_STATIC_LIBS is defined, the multithreaded -#// DLL version of the RTL is used... -#// -#//------------------------------------------------------------------------ -ifdef USE_STATIC_LIBS -RTL_FLAGS=-MT # Statically linked multithreaded RTL -ifneq (,$(MOZ_DEBUG)$(NS_TRACE_MALLOC)) -ifndef MOZ_NO_DEBUG_RTL -RTL_FLAGS=-MTd # Statically linked multithreaded MSVC4.0 debug RTL -endif -endif # MOZ_DEBUG || NS_TRACE_MALLOC - -else # !USE_STATIC_LIBS - -RTL_FLAGS=-MD # Dynamically linked, multithreaded RTL -ifneq (,$(MOZ_DEBUG)$(NS_TRACE_MALLOC)) -ifndef MOZ_NO_DEBUG_RTL -RTL_FLAGS=-MDd # Dynamically linked, multithreaded MSVC4.0 debug RTL -endif -endif # MOZ_DEBUG || NS_TRACE_MALLOC -endif # USE_STATIC_LIBS -endif # WINNT && !GNU_CC - -ifeq ($(OS_ARCH),Darwin) -# Compiling ObjC requires an Apple compiler anyway, so it's ok to set -# host CMFLAGS here. -HOST_CMFLAGS += -fobjc-exceptions -HOST_CMMFLAGS += -fobjc-exceptions -OS_COMPILE_CMFLAGS += -fobjc-exceptions -OS_COMPILE_CMMFLAGS += -fobjc-exceptions -ifeq ($(MOZ_WIDGET_TOOLKIT),uikit) -OS_COMPILE_CMFLAGS += -fobjc-abi-version=2 -fobjc-legacy-dispatch -OS_COMPILE_CMMFLAGS += -fobjc-abi-version=2 -fobjc-legacy-dispatch -endif -endif - -COMPILE_CFLAGS = $(VISIBILITY_FLAGS) $(DEFINES) $(INCLUDES) $(DSO_CFLAGS) $(DSO_PIC_CFLAGS) $(RTL_FLAGS) $(OS_CPPFLAGS) $(OS_COMPILE_CFLAGS) $(CFLAGS) $(EXTRA_COMPILE_FLAGS) -COMPILE_CXXFLAGS = $(STL_FLAGS) $(VISIBILITY_FLAGS) $(DEFINES) $(INCLUDES) $(DSO_CFLAGS) $(DSO_PIC_CFLAGS) $(RTL_FLAGS) $(OS_CPPFLAGS) $(OS_COMPILE_CXXFLAGS) $(CXXFLAGS) $(EXTRA_COMPILE_FLAGS) -COMPILE_CMFLAGS = $(OS_COMPILE_CMFLAGS) $(EXTRA_COMPILE_FLAGS) -COMPILE_CMMFLAGS = $(OS_COMPILE_CMMFLAGS) $(EXTRA_COMPILE_FLAGS) -ASFLAGS += $(EXTRA_ASSEMBLER_FLAGS) - -ifndef CROSS_COMPILE -HOST_CFLAGS += $(RTL_FLAGS) -endif - -# -# Name of the binary code directories -# -# Override defaults - -# We need to know where to find the libraries we -# put on the link line for binaries, and should -# we link statically or dynamic? Assuming dynamic for now. - -ifneq (WINNT_,$(OS_ARCH)_$(GNU_CC)) -LIBS_DIR = -L$(DIST)/bin -L$(DIST)/lib -ifdef LIBXUL_SDK -LIBS_DIR += -L$(LIBXUL_SDK)/bin -L$(LIBXUL_SDK)/lib -endif -endif - -# Default location of include files -ifndef LIBXUL_SDK -IDL_PARSER_DIR = $(topsrcdir)/xpcom/idl-parser -IDL_PARSER_CACHE_DIR = $(DEPTH)/xpcom/idl-parser -else -IDL_PARSER_DIR = $(LIBXUL_SDK)/sdk/bin -IDL_PARSER_CACHE_DIR = $(LIBXUL_SDK)/sdk/bin -endif - -SDK_LIB_DIR = $(DIST)/sdk/lib -SDK_BIN_DIR = $(DIST)/sdk/bin - -DEPENDENCIES = .md - -MOZ_COMPONENT_LIBS=$(XPCOM_LIBS) $(MOZ_COMPONENT_NSPR_LIBS) - -ifdef MACOSX_DEPLOYMENT_TARGET -export MACOSX_DEPLOYMENT_TARGET -endif # MACOSX_DEPLOYMENT_TARGET - -ifdef MOZ_USING_CCACHE -ifdef CLANG_CXX -export CCACHE_CPP2=1 -endif -endif - -# Set link flags according to whether we want a console. -ifdef MOZ_WINCONSOLE -ifeq ($(MOZ_WINCONSOLE),1) -ifeq ($(OS_ARCH),OS2) -BIN_FLAGS += -Zlinker -PM:VIO -endif -ifeq ($(OS_ARCH),WINNT) -ifdef GNU_CC -WIN32_EXE_LDFLAGS += -mconsole -else -WIN32_EXE_LDFLAGS += -SUBSYSTEM:CONSOLE -endif -endif -else # MOZ_WINCONSOLE -ifeq ($(OS_ARCH),OS2) -BIN_FLAGS += -Zlinker -PM:PM -endif -ifeq ($(OS_ARCH),WINNT) -ifdef GNU_CC -WIN32_EXE_LDFLAGS += -mwindows -else -WIN32_EXE_LDFLAGS += -SUBSYSTEM:WINDOWS -endif -endif -endif -endif - -ifdef _MSC_VER -ifeq ($(CPU_ARCH),x86_64) -# set stack to 2MB on x64 build. See bug 582910 -WIN32_EXE_LDFLAGS += -STACK:2097152 -endif -endif - -# If we're building a component on MSVC, we don't want to generate an -# import lib, because that import lib will collide with the name of a -# static version of the same library. -ifeq ($(GNU_LD)$(OS_ARCH),WINNT) -ifdef IS_COMPONENT -LDFLAGS += -IMPLIB:fake.lib -DELETE_AFTER_LINK = fake.lib fake.exp -endif -endif - -# -# Include any personal overrides the user might think are needed. -# --include $(topsrcdir)/$(MOZ_BUILD_APP)/app-config.mk --include $(MY_CONFIG) - -###################################################################### - -GARBAGE += $(DEPENDENCIES) core $(wildcard core.[0-9]*) $(wildcard *.err) $(wildcard *.pure) $(wildcard *_pure_*.o) Templates.DB - -ifeq ($(OS_ARCH),Darwin) -ifndef NSDISTMODE -NSDISTMODE=absolute_symlink -endif -PWD := $(CURDIR) -endif - -NSINSTALL_PY := $(PYTHON) $(abspath $(topsrcdir)/config/nsinstall.py) -# For Pymake, wherever we use nsinstall.py we're also going to try to make it -# a native command where possible. Since native commands can't be used outside -# of single-line commands, we continue to provide INSTALL for general use. -# Single-line commands should be switched over to install_cmd. -NSINSTALL_NATIVECMD := %nsinstall nsinstall - -ifdef NSINSTALL_BIN -NSINSTALL = $(NSINSTALL_BIN) -else -ifeq (OS2,$(CROSS_COMPILE)$(OS_ARCH)) -NSINSTALL = $(MOZ_TOOLS_DIR)/nsinstall -else -ifeq ($(HOST_OS_ARCH),WINNT) -NSINSTALL = $(NSINSTALL_PY) -else -NSINSTALL = $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX) -endif # WINNT -endif # OS2 -endif # NSINSTALL_BIN - - -ifeq (,$(CROSS_COMPILE)$(filter-out WINNT OS2, $(OS_ARCH))) -INSTALL = $(NSINSTALL) -t -ifdef .PYMAKE -install_cmd = $(NSINSTALL_NATIVECMD) -t $(1) -endif # .PYMAKE - -else - -# This isn't laid out as conditional directives so that NSDISTMODE can be -# target-specific. -INSTALL = $(if $(filter copy, $(NSDISTMODE)), $(NSINSTALL) -t, $(if $(filter absolute_symlink, $(NSDISTMODE)), $(NSINSTALL) -L $(PWD), $(NSINSTALL) -R)) - -endif # WINNT/OS2 - -# The default for install_cmd is simply INSTALL -install_cmd ?= $(INSTALL) $(1) - -# Use nsinstall in copy mode to install files on the system -SYSINSTALL = $(NSINSTALL) -t -# This isn't necessarily true, just here -sysinstall_cmd = install_cmd - -# -# Localization build automation -# - -# Because you might wish to "make locales AB_CD=ab-CD", we don't hardcode -# MOZ_UI_LOCALE directly, but use an intermediate variable that can be -# overridden by the command line. (Besides, AB_CD is prettier). -AB_CD = $(MOZ_UI_LOCALE) - -ifndef L10NBASEDIR - L10NBASEDIR = $(error L10NBASEDIR not defined by configure) -else - IS_LANGUAGE_REPACK = 1 -endif - -EXPAND_LOCALE_SRCDIR = $(if $(filter en-US,$(AB_CD)),$(topsrcdir)/$(1)/en-US,$(or $(realpath $(L10NBASEDIR)),$(abspath $(L10NBASEDIR)))/$(AB_CD)/$(subst /locales,,$(1))) - -ifdef relativesrcdir -LOCALE_SRCDIR ?= $(call EXPAND_LOCALE_SRCDIR,$(relativesrcdir)) -endif - -ifdef relativesrcdir -MAKE_JARS_FLAGS += --relativesrcdir=$(relativesrcdir) -ifneq (en-US,$(AB_CD)) -ifdef LOCALE_MERGEDIR -MAKE_JARS_FLAGS += --locale-mergedir=$(LOCALE_MERGEDIR) -endif -ifdef IS_LANGUAGE_REPACK -MAKE_JARS_FLAGS += --l10n-base=$(L10NBASEDIR)/$(AB_CD) -endif -else -MAKE_JARS_FLAGS += -c $(LOCALE_SRCDIR) -endif # en-US -else -MAKE_JARS_FLAGS += -c $(LOCALE_SRCDIR) -endif # ! relativesrcdir - -ifdef LOCALE_MERGEDIR -MERGE_FILE = $(firstword \ - $(wildcard $(LOCALE_MERGEDIR)/$(subst /locales,,$(relativesrcdir))/$(1)) \ - $(wildcard $(LOCALE_SRCDIR)/$(1)) \ - $(srcdir)/en-US/$(1) ) -else -MERGE_FILE = $(LOCALE_SRCDIR)/$(1) -endif -MERGE_FILES = $(foreach f,$(1),$(call MERGE_FILE,$(f))) - -ifeq (OS2,$(OS_ARCH)) -RUN_TEST_PROGRAM = $(topsrcdir)/build/os2/test_os2.cmd '$(LIBXUL_DIST)' -else -ifneq (WINNT,$(OS_ARCH)) -RUN_TEST_PROGRAM = $(LIBXUL_DIST)/bin/run-mozilla.sh -endif # ! WINNT -endif # ! OS2 - -# -# Java macros -# - -# Make sure any compiled classes work with at least JVM 1.4 -JAVAC_FLAGS += -source 1.4 - -ifdef MOZ_DEBUG -JAVAC_FLAGS += -g -endif - -CREATE_PRECOMPLETE_CMD = $(PYTHON) $(abspath $(topsrcdir)/config/createprecomplete.py) - -# MDDEPDIR is the subdirectory where dependency files are stored -MDDEPDIR := .deps - -EXPAND_LIBS_EXEC = $(PYTHON) $(topsrcdir)/config/expandlibs_exec.py $(if $@,--depend $(MDDEPDIR)/$@.pp --target $@) -EXPAND_LIBS_GEN = $(PYTHON) $(topsrcdir)/config/expandlibs_gen.py $(if $@,--depend $(MDDEPDIR)/$@.pp) -EXPAND_AR = $(EXPAND_LIBS_EXEC) --extract -- $(AR) -EXPAND_CC = $(EXPAND_LIBS_EXEC) --uselist -- $(CC) -EXPAND_CCC = $(EXPAND_LIBS_EXEC) --uselist -- $(CCC) -EXPAND_LD = $(EXPAND_LIBS_EXEC) --uselist -- $(LD) -EXPAND_MKSHLIB_ARGS = --uselist -ifdef SYMBOL_ORDER -EXPAND_MKSHLIB_ARGS += --symbol-order $(SYMBOL_ORDER) -endif -EXPAND_MKSHLIB = $(EXPAND_LIBS_EXEC) $(EXPAND_MKSHLIB_ARGS) -- $(MKSHLIB) - -ifneq (,$(MOZ_LIBSTDCXX_TARGET_VERSION)$(MOZ_LIBSTDCXX_HOST_VERSION)) -ifneq ($(OS_ARCH),Darwin) -CHECK_STDCXX = objdump -p $(1) | grep -e 'GLIBCXX_3\.4\.\(9\|[1-9][0-9]\)' > /dev/null && echo 'TEST-UNEXPECTED-FAIL | | We do not want these libstdc++ symbols to be used:' && objdump -T $(1) | grep -e 'GLIBCXX_3\.4\.\(9\|[1-9][0-9]\)' && exit 1 || exit 0 -endif - -ifdef MOZ_LIBSTDCXX_TARGET_VERSION -EXTRA_LIBS += $(call EXPAND_LIBNAME_PATH,stdc++compat,$(DEPTH)/build/unix/stdc++compat) -endif -ifdef MOZ_LIBSTDCXX_HOST_VERSION -HOST_EXTRA_LIBS += $(call EXPAND_LIBNAME_PATH,host_stdc++compat,$(DEPTH)/build/unix/stdc++compat) -endif -endif - -# autoconf.mk sets OBJ_SUFFIX to an error to avoid use before including -# this file -OBJ_SUFFIX := $(_OBJ_SUFFIX) - -# PGO builds with GCC build objects with instrumentation in a first pass, -# then objects optimized, without instrumentation, in a second pass. If -# we overwrite the ojects from the first pass with those from the second, -# we end up not getting instrumentation data for better optimization on -# incremental builds. As a consequence, we use a different object suffix -# for the first pass. -ifndef NO_PROFILE_GUIDED_OPTIMIZE -ifdef MOZ_PROFILE_GENERATE -ifdef GNU_CC -OBJ_SUFFIX := i_o -endif -endif -endif - -# EXPAND_LIBNAME - $(call EXPAND_LIBNAME,foo) -# expands to $(LIB_PREFIX)foo.$(LIB_SUFFIX) or -lfoo, depending on linker -# arguments syntax. Should only be used for system libraries - -# EXPAND_LIBNAME_PATH - $(call EXPAND_LIBNAME_PATH,foo,dir) -# expands to dir/$(LIB_PREFIX)foo.$(LIB_SUFFIX) - -# EXPAND_MOZLIBNAME - $(call EXPAND_MOZLIBNAME,foo) -# expands to $(DIST)/lib/$(LIB_PREFIX)foo.$(LIB_SUFFIX) - -ifdef GNU_CC -EXPAND_LIBNAME = $(addprefix -l,$(1)) -else -EXPAND_LIBNAME = $(foreach lib,$(1),$(LIB_PREFIX)$(lib).$(LIB_SUFFIX)) -endif -EXPAND_LIBNAME_PATH = $(foreach lib,$(1),$(2)/$(LIB_PREFIX)$(lib).$(LIB_SUFFIX)) -EXPAND_MOZLIBNAME = $(foreach lib,$(1),$(DIST)/lib/$(LIB_PREFIX)$(lib).$(LIB_SUFFIX)) - -PLY_INCLUDE = -I$(topsrcdir)/other-licenses/ply - -export CL_INCLUDES_PREFIX -# Make sure that the build system can handle non-ASCII characters -# in environment variables to prevent it from breking silently on -# non-English systems. -export NONASCII - -ifdef MOZ_GTK2_CFLAGS -MOZ_GTK2_CFLAGS := -I$(topsrcdir)/widget/gtk/compat $(MOZ_GTK2_CFLAGS) -endif - -DEFINES += -DNO_NSPR_10_SUPPORT - -ifdef IS_GYP_DIR -LOCAL_INCLUDES += \ - -I$(topsrcdir)/ipc/chromium/src \ - -I$(topsrcdir)/ipc/glue \ - -I$(DEPTH)/ipc/ipdl/_ipdlheaders \ - $(NULL) - -ifeq (WINNT,$(OS_TARGET)) -# These get set via VC project file settings for normal GYP builds. -DEFINES += -DUNICODE -D_UNICODE -LOCAL_INCLUDES += -I'$(MOZ_DIRECTX_SDK_PATH)/include' -endif - -STL_FLAGS= -# Skip most Mozilla-specific include locations. -INCLUDES = -I. $(LOCAL_INCLUDES) -I$(DEPTH)/dist/include -endif diff --git a/js/src/config/emptyvars.mk.in b/js/src/config/emptyvars.mk.in deleted file mode 100644 index 388cf2a3598..00000000000 --- a/js/src/config/emptyvars.mk.in +++ /dev/null @@ -1 +0,0 @@ -@ALLEMPTYSUBSTS@ diff --git a/js/src/config/expandlibs.py b/js/src/config/expandlibs.py deleted file mode 100644 index b63492b0e5b..00000000000 --- a/js/src/config/expandlibs.py +++ /dev/null @@ -1,145 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -'''Expandlibs is a system that allows to replace some libraries with a -descriptor file containing some linking information about them. - -The descriptor file format is as follows: ----8<----- -OBJS = a.o b.o ... -LIBS = libfoo.a libbar.a ... ---->8----- - -(In the example above, OBJ_SUFFIX is o and LIB_SUFFIX is a). - -Expandlibs also canonicalizes how to pass libraries to the linker, such -that only the ${LIB_PREFIX}${ROOT}.${LIB_SUFFIX} form needs to be used: -given a list of files, expandlibs will replace items with the form -${LIB_PREFIX}${ROOT}.${LIB_SUFFIX} following these rules: - -- If a ${DLL_PREFIX}${ROOT}.${DLL_SUFFIX} or - ${DLL_PREFIX}${ROOT}.${IMPORT_LIB_SUFFIX} file exists, use that instead -- If the ${LIB_PREFIX}${ROOT}.${LIB_SUFFIX} file exists, use it -- If a ${LIB_PREFIX}${ROOT}.${LIB_SUFFIX}.${LIB_DESC_SUFFIX} file exists, - replace ${LIB_PREFIX}${ROOT}.${LIB_SUFFIX} with the OBJS and LIBS the - descriptor contains. And for each of these LIBS, also apply the same - rules. -''' -from __future__ import with_statement -import sys, os, errno -import expandlibs_config as conf - -def ensureParentDir(file): - '''Ensures the directory parent to the given file exists''' - dir = os.path.dirname(file) - if dir and not os.path.exists(dir): - try: - os.makedirs(dir) - except OSError, error: - if error.errno != errno.EEXIST: - raise - -def relativize(path): - '''Returns a path relative to the current working directory, if it is - shorter than the given path''' - def splitpath(path): - dir, file = os.path.split(path) - if os.path.splitdrive(dir)[1] == os.sep: - return [file] - return splitpath(dir) + [file] - - if not os.path.exists(path): - return path - curdir = splitpath(os.path.abspath(os.curdir)) - abspath = splitpath(os.path.abspath(path)) - while curdir and abspath and curdir[0] == abspath[0]: - del curdir[0] - del abspath[0] - if not curdir and not abspath: - return '.' - relpath = os.path.join(*[os.pardir for i in curdir] + abspath) - if len(path) > len(relpath): - return relpath - return path - -def isObject(path): - '''Returns whether the given path points to an object file, that is, - ends with OBJ_SUFFIX or .i_o''' - return os.path.splitext(path)[1] in [conf.OBJ_SUFFIX, '.i_o'] - -def isDynamicLib(path): - '''Returns whether the given path points to a dynamic library, that is, - ends with DLL_SUFFIX.''' - # On mac, the xul library is named XUL, instead of libxul.dylib. Assume any - # file by that name is a dynamic library. - return os.path.splitext(path)[1] == conf.DLL_SUFFIX or os.path.basename(path) == 'XUL' - -class LibDescriptor(dict): - KEYS = ['OBJS', 'LIBS'] - - def __init__(self, content=None): - '''Creates an instance of a lib descriptor, initialized with contents - from a list of strings when given. This is intended for use with - file.readlines()''' - if isinstance(content, list) and all([isinstance(item, str) for item in content]): - pass - elif content is not None: - raise TypeError("LibDescriptor() arg 1 must be None or a list of strings") - super(LibDescriptor, self).__init__() - for key in self.KEYS: - self[key] = [] - if not content: - return - for key, value in [(s.strip() for s in item.split('=', 2)) for item in content if item.find('=') >= 0]: - if key in self.KEYS: - self[key] = value.split() - - def __str__(self): - '''Serializes the lib descriptor''' - return '\n'.join('%s = %s' % (k, ' '.join(self[k])) for k in self.KEYS if len(self[k])) - -class ExpandArgs(list): - def __init__(self, args): - '''Creates a clone of the |args| list and performs file expansion on - each item it contains''' - super(ExpandArgs, self).__init__() - for arg in args: - self += self._expand(arg) - - def _expand(self, arg): - '''Internal function doing the actual work''' - (root, ext) = os.path.splitext(arg) - if ext != conf.LIB_SUFFIX or not os.path.basename(root).startswith(conf.LIB_PREFIX): - return [relativize(arg)] - if len(conf.IMPORT_LIB_SUFFIX): - dll = root + conf.IMPORT_LIB_SUFFIX - else: - dll = root.replace(conf.LIB_PREFIX, conf.DLL_PREFIX, 1) + conf.DLL_SUFFIX - if os.path.exists(dll): - return [relativize(dll)] - if os.path.exists(arg): - return [relativize(arg)] - return self._expand_desc(arg) - - def _expand_desc(self, arg): - '''Internal function taking care of lib descriptor expansion only''' - if os.path.exists(arg + conf.LIBS_DESC_SUFFIX): - with open(arg + conf.LIBS_DESC_SUFFIX, 'r') as f: - desc = LibDescriptor(f.readlines()) - objs = [relativize(o) for o in desc['OBJS']] - for lib in desc['LIBS']: - objs += self._expand(lib) - return objs - return [arg] - -class ExpandLibsDeps(ExpandArgs): - '''Same as ExpandArgs, but also adds the library descriptor to the list''' - def _expand_desc(self, arg): - objs = super(ExpandLibsDeps, self)._expand_desc(arg) - if os.path.exists(arg + conf.LIBS_DESC_SUFFIX): - objs += [relativize(arg + conf.LIBS_DESC_SUFFIX)] - return objs - -if __name__ == '__main__': - print " ".join(ExpandArgs(sys.argv[1:])) diff --git a/js/src/config/expandlibs_config.py b/js/src/config/expandlibs_config.py deleted file mode 100644 index 8365f77cd12..00000000000 --- a/js/src/config/expandlibs_config.py +++ /dev/null @@ -1,27 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -from buildconfig import substs - -def normalize_suffix(suffix): - '''Returns a normalized suffix, i.e. ensures it starts with a dot and - doesn't starts or ends with whitespace characters''' - value = suffix.strip() - if len(value) and not value.startswith('.'): - value = '.' + value - return value - -# Variables from the build system -AR = substs['AR'] -AR_EXTRACT = substs['AR_EXTRACT'].replace('$(AR)', AR) -DLL_PREFIX = substs['DLL_PREFIX'] -LIB_PREFIX = substs['LIB_PREFIX'] -OBJ_SUFFIX = normalize_suffix(substs['OBJ_SUFFIX']) -LIB_SUFFIX = normalize_suffix(substs['LIB_SUFFIX']) -DLL_SUFFIX = normalize_suffix(substs['DLL_SUFFIX']) -IMPORT_LIB_SUFFIX = normalize_suffix(substs['IMPORT_LIB_SUFFIX']) -LIBS_DESC_SUFFIX = normalize_suffix(substs['LIBS_DESC_SUFFIX']) -EXPAND_LIBS_LIST_STYLE = substs['EXPAND_LIBS_LIST_STYLE'] -EXPAND_LIBS_ORDER_STYLE = substs['EXPAND_LIBS_ORDER_STYLE'] -LD_PRINT_ICF_SECTIONS = substs['LD_PRINT_ICF_SECTIONS'] diff --git a/js/src/config/expandlibs_exec.py b/js/src/config/expandlibs_exec.py deleted file mode 100644 index f6ac5a033c2..00000000000 --- a/js/src/config/expandlibs_exec.py +++ /dev/null @@ -1,361 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -'''expandlibs-exec.py applies expandlibs rules, and some more (see below) to -a given command line, and executes that command line with the expanded -arguments. - -With the --extract argument (useful for e.g. $(AR)), it extracts object files -from static libraries (or use those listed in library descriptors directly). - -With the --uselist argument (useful for e.g. $(CC)), it replaces all object -files with a list file. This can be used to avoid limitations in the length -of a command line. The kind of list file format used depends on the -EXPAND_LIBS_LIST_STYLE variable: 'list' for MSVC style lists (@file.list) -or 'linkerscript' for GNU ld linker scripts. -See https://bugzilla.mozilla.org/show_bug.cgi?id=584474#c59 for more details. - -With the --symbol-order argument, followed by a file name, it will add the -relevant linker options to change the order in which the linker puts the -symbols appear in the resulting binary. Only works for ELF targets. -''' -from __future__ import with_statement -import sys -import os -from expandlibs import ( - ExpandArgs, - relativize, - isDynamicLib, - isObject, - ensureParentDir, - ExpandLibsDeps, -) -import expandlibs_config as conf -from optparse import OptionParser -import subprocess -import tempfile -import shutil -import subprocess -import re -from mozbuild.makeutil import Makefile - -# The are the insert points for a GNU ld linker script, assuming a more -# or less "standard" default linker script. This is not a dict because -# order is important. -SECTION_INSERT_BEFORE = [ - ('.text', '.fini'), - ('.rodata', '.rodata1'), - ('.data.rel.ro', '.dynamic'), - ('.data', '.data1'), -] - -class ExpandArgsMore(ExpandArgs): - ''' Meant to be used as 'with ExpandArgsMore(args) as ...: ''' - def __enter__(self): - self.tmp = [] - return self - - def __exit__(self, type, value, tb): - '''Automatically remove temporary files''' - for tmp in self.tmp: - if os.path.isdir(tmp): - shutil.rmtree(tmp, True) - else: - os.remove(tmp) - - def extract(self): - self[0:] = self._extract(self) - - def _extract(self, args): - '''When a static library name is found, either extract its contents - in a temporary directory or use the information found in the - corresponding lib descriptor. - ''' - ar_extract = conf.AR_EXTRACT.split() - newlist = [] - for arg in args: - if os.path.splitext(arg)[1] == conf.LIB_SUFFIX: - if os.path.exists(arg + conf.LIBS_DESC_SUFFIX): - newlist += self._extract(self._expand_desc(arg)) - continue - elif os.path.exists(arg) and (len(ar_extract) or conf.AR == 'lib'): - tmp = tempfile.mkdtemp(dir=os.curdir) - self.tmp.append(tmp) - if conf.AR == 'lib': - out = subprocess.check_output([conf.AR, '-NOLOGO', '-LIST', arg]) - files = out.splitlines() - # If lib -list returns a list full of dlls, it's an - # import lib. - if all(isDynamicLib(f) for f in files): - newlist += [arg] - continue - for f in files: - subprocess.call([conf.AR, '-NOLOGO', '-EXTRACT:%s' % f, os.path.abspath(arg)], cwd=tmp) - else: - subprocess.call(ar_extract + [os.path.abspath(arg)], cwd=tmp) - objs = [] - for root, dirs, files in os.walk(tmp): - objs += [relativize(os.path.join(root, f)) for f in files if isObject(f)] - newlist += sorted(objs) - continue - newlist += [arg] - return newlist - - def makelist(self): - '''Replaces object file names with a temporary list file, using a - list format depending on the EXPAND_LIBS_LIST_STYLE variable - ''' - objs = [o for o in self if isObject(o)] - if not len(objs): return - fd, tmp = tempfile.mkstemp(suffix=".list",dir=os.curdir) - if conf.EXPAND_LIBS_LIST_STYLE == "linkerscript": - content = ['INPUT("%s")\n' % obj for obj in objs] - ref = tmp - elif conf.EXPAND_LIBS_LIST_STYLE == "filelist": - content = ["%s\n" % obj for obj in objs] - ref = "-Wl,-filelist," + tmp - elif conf.EXPAND_LIBS_LIST_STYLE == "list": - content = ["%s\n" % obj for obj in objs] - ref = "@" + tmp - else: - os.close(fd) - os.remove(tmp) - return - self.tmp.append(tmp) - f = os.fdopen(fd, "w") - f.writelines(content) - f.close() - idx = self.index(objs[0]) - newlist = self[0:idx] + [ref] + [item for item in self[idx:] if item not in objs] - self[0:] = newlist - - def _getFoldedSections(self): - '''Returns a dict about folded sections. - When section A and B are folded into section C, the dict contains: - { 'A': 'C', - 'B': 'C', - 'C': ['A', 'B'] }''' - if not conf.LD_PRINT_ICF_SECTIONS: - return {} - - proc = subprocess.Popen(self + [conf.LD_PRINT_ICF_SECTIONS], stdout = subprocess.PIPE, stderr = subprocess.PIPE) - (stdout, stderr) = proc.communicate() - result = {} - # gold's --print-icf-sections output looks like the following: - # ld: ICF folding section '.section' in file 'file.o'into '.section' in file 'file.o' - # In terms of words, chances are this will change in the future, - # especially considering "into" is misplaced. Splitting on quotes - # seems safer. - for l in stderr.split('\n'): - quoted = l.split("'") - if len(quoted) > 5 and quoted[1] != quoted[5]: - result[quoted[1]] = [quoted[5]] - if quoted[5] in result: - result[quoted[5]].append(quoted[1]) - else: - result[quoted[5]] = [quoted[1]] - return result - - def _getOrderedSections(self, ordered_symbols): - '''Given an ordered list of symbols, returns the corresponding list - of sections following the order.''' - if not conf.EXPAND_LIBS_ORDER_STYLE in ['linkerscript', 'section-ordering-file']: - raise Exception('EXPAND_LIBS_ORDER_STYLE "%s" is not supported' % conf.EXPAND_LIBS_ORDER_STYLE) - finder = SectionFinder([arg for arg in self if isObject(arg) or os.path.splitext(arg)[1] == conf.LIB_SUFFIX]) - folded = self._getFoldedSections() - sections = set() - ordered_sections = [] - for symbol in ordered_symbols: - symbol_sections = finder.getSections(symbol) - all_symbol_sections = [] - for section in symbol_sections: - if section in folded: - if isinstance(folded[section], str): - section = folded[section] - all_symbol_sections.append(section) - all_symbol_sections.extend(folded[section]) - else: - all_symbol_sections.append(section) - for section in all_symbol_sections: - if not section in sections: - ordered_sections.append(section) - sections.add(section) - return ordered_sections - - def orderSymbols(self, order): - '''Given a file containing a list of symbols, adds the appropriate - argument to make the linker put the symbols in that order.''' - with open(order) as file: - sections = self._getOrderedSections([l.strip() for l in file.readlines() if l.strip()]) - split_sections = {} - linked_sections = [s[0] for s in SECTION_INSERT_BEFORE] - for s in sections: - for linked_section in linked_sections: - if s.startswith(linked_section): - if linked_section in split_sections: - split_sections[linked_section].append(s) - else: - split_sections[linked_section] = [s] - break - content = [] - # Order is important - linked_sections = [s for s in linked_sections if s in split_sections] - - if conf.EXPAND_LIBS_ORDER_STYLE == 'section-ordering-file': - option = '-Wl,--section-ordering-file,%s' - content = sections - for linked_section in linked_sections: - content.extend(split_sections[linked_section]) - content.append('%s.*' % linked_section) - content.append(linked_section) - - elif conf.EXPAND_LIBS_ORDER_STYLE == 'linkerscript': - option = '-Wl,-T,%s' - section_insert_before = dict(SECTION_INSERT_BEFORE) - for linked_section in linked_sections: - content.append('SECTIONS {') - content.append(' %s : {' % linked_section) - content.extend(' *(%s)' % s for s in split_sections[linked_section]) - content.append(' }') - content.append('}') - content.append('INSERT BEFORE %s' % section_insert_before[linked_section]) - else: - raise Exception('EXPAND_LIBS_ORDER_STYLE "%s" is not supported' % conf.EXPAND_LIBS_ORDER_STYLE) - - fd, tmp = tempfile.mkstemp(dir=os.curdir) - f = os.fdopen(fd, "w") - f.write('\n'.join(content)+'\n') - f.close() - self.tmp.append(tmp) - self.append(option % tmp) - -class SectionFinder(object): - '''Instances of this class allow to map symbol names to sections in - object files.''' - - def __init__(self, objs): - '''Creates an instance, given a list of object files.''' - if not conf.EXPAND_LIBS_ORDER_STYLE in ['linkerscript', 'section-ordering-file']: - raise Exception('EXPAND_LIBS_ORDER_STYLE "%s" is not supported' % conf.EXPAND_LIBS_ORDER_STYLE) - self.mapping = {} - for obj in objs: - if not isObject(obj) and os.path.splitext(obj)[1] != conf.LIB_SUFFIX: - raise Exception('%s is not an object nor a static library' % obj) - for symbol, section in SectionFinder._getSymbols(obj): - sym = SectionFinder._normalize(symbol) - if sym in self.mapping: - if not section in self.mapping[sym]: - self.mapping[sym].append(section) - else: - self.mapping[sym] = [section] - - def getSections(self, symbol): - '''Given a symbol, returns a list of sections containing it or the - corresponding thunks. When the given symbol is a thunk, returns the - list of sections containing its corresponding normal symbol and the - other thunks for that symbol.''' - sym = SectionFinder._normalize(symbol) - if sym in self.mapping: - return self.mapping[sym] - return [] - - @staticmethod - def _normalize(symbol): - '''For normal symbols, return the given symbol. For thunks, return - the corresponding normal symbol.''' - if re.match('^_ZThn[0-9]+_', symbol): - return re.sub('^_ZThn[0-9]+_', '_Z', symbol) - return symbol - - @staticmethod - def _getSymbols(obj): - '''Returns a list of (symbol, section) contained in the given object - file.''' - proc = subprocess.Popen(['objdump', '-t', obj], stdout = subprocess.PIPE, stderr = subprocess.PIPE) - (stdout, stderr) = proc.communicate() - syms = [] - for line in stdout.splitlines(): - # Each line has the following format: - # [lgu!][w ][C ][W ][Ii ][dD ][FfO ]
\t - tmp = line.split(' ',1) - # This gives us ["", "[lgu!][w ][C ][W ][Ii ][dD ][FfO ]
\t "] - # We only need to consider cases where "
\t " is present, - # and where the [FfO] flag is either F (function) or O (object). - if len(tmp) > 1 and len(tmp[1]) > 6 and tmp[1][6] in ['O', 'F']: - tmp = tmp[1][8:].split() - # That gives us ["
","", ""] - syms.append((tmp[-1], tmp[0])) - return syms - -def print_command(out, args): - print >>out, "Executing: " + " ".join(args) - for tmp in [f for f in args.tmp if os.path.isfile(f)]: - print >>out, tmp + ":" - with open(tmp) as file: - print >>out, "".join([" " + l for l in file.readlines()]) - out.flush() - -def main(): - parser = OptionParser() - parser.add_option("--depend", dest="depend", metavar="FILE", - help="generate dependencies for the given execution and store it in the given file") - parser.add_option("--target", dest="target", metavar="FILE", - help="designate the target for dependencies") - parser.add_option("--extract", action="store_true", dest="extract", - help="when a library has no descriptor file, extract it first, when possible") - parser.add_option("--uselist", action="store_true", dest="uselist", - help="use a list file for objects when executing a command") - parser.add_option("--verbose", action="store_true", dest="verbose", - help="display executed command and temporary files content") - parser.add_option("--symbol-order", dest="symbol_order", metavar="FILE", - help="use the given list of symbols to order symbols in the resulting binary when using with a linker") - - (options, args) = parser.parse_args() - - if not options.target: - options.depend = False - if options.depend: - deps = ExpandLibsDeps(args) - # Filter out common command wrappers - while os.path.basename(deps[0]) in ['ccache', 'distcc']: - deps.pop(0) - # Remove command - deps.pop(0) - with ExpandArgsMore(args) as args: - if options.extract: - args.extract() - if options.symbol_order: - args.orderSymbols(options.symbol_order) - if options.uselist: - args.makelist() - - if options.verbose: - print_command(sys.stderr, args) - try: - proc = subprocess.Popen(args, stdout = subprocess.PIPE, stderr = subprocess.STDOUT) - except Exception, e: - print >>sys.stderr, 'error: Launching', args, ':', e - raise e - (stdout, stderr) = proc.communicate() - if proc.returncode and not options.verbose: - print_command(sys.stderr, args) - sys.stderr.write(stdout) - sys.stderr.flush() - if proc.returncode: - exit(proc.returncode) - if not options.depend: - return - ensureParentDir(options.depend) - mk = Makefile() - deps = [dep for dep in deps if os.path.isfile(dep) and dep != options.target] - no_dynamic_lib = [dep for dep in deps if not isDynamicLib(dep)] - mk.create_rule([options.target]).add_dependencies(no_dynamic_lib) - if len(deps) != len(no_dynamic_lib): - mk.create_rule(['%s_order_only' % options.target]).add_dependencies(dep for dep in deps if isDynamicLib(dep)) - - with open(options.depend, 'w') as depfile: - mk.dump(depfile, removal_guard=True) - -if __name__ == '__main__': - main() diff --git a/js/src/config/expandlibs_gen.py b/js/src/config/expandlibs_gen.py deleted file mode 100644 index 25962f60c94..00000000000 --- a/js/src/config/expandlibs_gen.py +++ /dev/null @@ -1,50 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -'''Given a list of object files and library names, prints a library -descriptor to standard output''' - -from __future__ import with_statement -import sys -import os -import expandlibs_config as conf -from expandlibs import LibDescriptor, isObject, ensureParentDir, ExpandLibsDeps -from optparse import OptionParser - -def generate(args): - desc = LibDescriptor() - for arg in args: - if isObject(arg): - if os.path.exists(arg): - desc['OBJS'].append(os.path.abspath(arg)) - else: - raise Exception("File not found: %s" % arg) - elif os.path.splitext(arg)[1] == conf.LIB_SUFFIX: - if os.path.exists(arg) or os.path.exists(arg + conf.LIBS_DESC_SUFFIX): - desc['LIBS'].append(os.path.abspath(arg)) - else: - raise Exception("File not found: %s" % arg) - return desc - -if __name__ == '__main__': - parser = OptionParser() - parser.add_option("--depend", dest="depend", metavar="FILE", - help="generate dependencies for the given execution and store it in the given file") - parser.add_option("-o", dest="output", metavar="FILE", - help="send output to the given file") - - (options, args) = parser.parse_args() - if not options.output: - raise Exception("Missing option: -o") - - ensureParentDir(options.output) - with open(options.output, 'w') as outfile: - print >>outfile, generate(args) - if options.depend: - ensureParentDir(options.depend) - with open(options.depend, 'w') as depfile: - deps = ExpandLibsDeps(args) - depfile.write("%s : %s\n" % (options.output, ' '.join(deps))) - for dep in deps: - depfile.write("%s :\n" % dep) diff --git a/js/src/config/find_OOM_errors.py b/js/src/config/find_OOM_errors.py deleted file mode 100644 index 16065119b78..00000000000 --- a/js/src/config/find_OOM_errors.py +++ /dev/null @@ -1,352 +0,0 @@ -#!/usr/bin/env python -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. -from __future__ import print_function - -usage = """%prog: A test for OOM conditions in the shell. - -%prog finds segfaults and other errors caused by incorrect handling of -allocation during OOM (out-of-memory) conditions. -""" - -help = """Check for regressions only. This runs a set of files with a known -number of OOM errors (specified by REGRESSION_COUNT), and exits with a non-zero -result if more or less errors are found. See js/src/Makefile.in for invocation. -""" - - -import hashlib -import re -import shlex -import subprocess -import sys -import threading -import time - -from optparse import OptionParser - -##################################################################### -# Utility functions -##################################################################### -def run(args, stdin=None): - class ThreadWorker(threading.Thread): - def __init__(self, pipe): - super(ThreadWorker, self).__init__() - self.all = "" - self.pipe = pipe - self.setDaemon(True) - - def run(self): - while True: - line = self.pipe.readline() - if line == '': break - else: - self.all += line - - try: - if type(args) == str: - args = shlex.split(args) - - args = [str(a) for a in args] # convert to strs - - stdin_pipe = subprocess.PIPE if stdin else None - proc = subprocess.Popen(args, stdin=stdin_pipe, stdout=subprocess.PIPE, stderr=subprocess.PIPE) - if stdin_pipe: - proc.stdin.write(stdin) - proc.stdin.close() - - stdout_worker = ThreadWorker(proc.stdout) - stderr_worker = ThreadWorker(proc.stderr) - stdout_worker.start() - stderr_worker.start() - - proc.wait() - stdout_worker.join() - stderr_worker.join() - - except KeyboardInterrupt as e: - sys.exit(-1) - - stdout, stderr = stdout_worker.all, stderr_worker.all - result = (stdout, stderr, proc.returncode) - return result - -def get_js_files(): - (out, err, exit) = run('find ../jit-test/tests -name "*.js"') - if (err, exit) != ("", 0): - sys.exit("Wrong directory, run from an objdir") - return out.split() - - - -##################################################################### -# Blacklisting -##################################################################### -def in_blacklist(sig): - return sig in blacklist - -def add_to_blacklist(sig): - blacklist[sig] = blacklist.get(sig, 0) - blacklist[sig] += 1 - -# How often is a particular lines important for this. -def count_lines(): - """Keep track of the amount of times individual lines occur, in order to - prioritize the errors which occur most frequently.""" - counts = {} - for string,count in blacklist.items(): - for line in string.split("\n"): - counts[line] = counts.get(line, 0) + count - - lines = [] - for k,v in counts.items(): - lines.append("{0:6}: {1}".format(v, k)) - - lines.sort() - - countlog = file("../OOM_count_log", "w") - countlog.write("\n".join(lines)) - countlog.flush() - countlog.close() - - -##################################################################### -# Output cleaning -##################################################################### -def clean_voutput(err): - # Skip what we can't reproduce - err = re.sub(r"^--\d+-- run: /usr/bin/dsymutil \"shell/js\"$", "", err, flags=re.MULTILINE) - err = re.sub(r"^==\d+==", "", err, flags=re.MULTILINE) - err = re.sub(r"^\*\*\d+\*\*", "", err, flags=re.MULTILINE) - err = re.sub(r"^\s+by 0x[0-9A-Fa-f]+: ", "by: ", err, flags=re.MULTILINE) - err = re.sub(r"^\s+at 0x[0-9A-Fa-f]+: ", "at: ", err, flags=re.MULTILINE) - err = re.sub(r"(^\s+Address 0x)[0-9A-Fa-f]+( is not stack'd)", r"\1\2", err, flags=re.MULTILINE) - err = re.sub(r"(^\s+Invalid write of size )\d+", r"\1x", err, flags=re.MULTILINE) - err = re.sub(r"(^\s+Invalid read of size )\d+", r"\1x", err, flags=re.MULTILINE) - err = re.sub(r"(^\s+Address 0x)[0-9A-Fa-f]+( is )\d+( bytes inside a block of size )[0-9,]+( free'd)", r"\1\2\3\4", err, flags=re.MULTILINE) - - # Skip the repeating bit due to the segfault - lines = [] - for l in err.split('\n'): - if l == " Process terminating with default action of signal 11 (SIGSEGV)": - break - lines.append(l) - err = '\n'.join(lines) - - return err - -def remove_failed_allocation_backtraces(err): - lines = [] - - add = True - for l in err.split('\n'): - - # Set start and end conditions for including text - if l == " The site of the failed allocation is:": - add = False - elif l[:2] not in ['by: ', 'at:']: - add = True - - if add: - lines.append(l) - - - err = '\n'.join(lines) - - return err - - -def clean_output(err): - err = re.sub(r"^js\(\d+,0x[0-9a-f]+\) malloc: \*\*\* error for object 0x[0-9a-f]+: pointer being freed was not allocated\n\*\*\* set a breakppoint in malloc_error_break to debug\n$", "pointer being freed was not allocated", err, flags=re.MULTILINE) - - return err - - -##################################################################### -# Consts, etc -##################################################################### - -command_template = 'shell/js' \ - + ' -m -j -p' \ - + ' -e "const platform=\'darwin\'; const libdir=\'../jit-test/lib/\';"' \ - + ' -f ../jit-test/lib/prolog.js' \ - + ' -f {0}' - - -# Blacklists are things we don't want to see in our logs again (though we do -# want to count them when they happen). Whitelists we do want to see in our -# logs again, principally because the information we have isn't enough. - -blacklist = {} -add_to_blacklist(r"('', '', 1)") # 1 means OOM if the shell hasn't launched yet. -add_to_blacklist(r"('', 'out of memory\n', 1)") - -whitelist = set() -whitelist.add(r"('', 'out of memory\n', -11)") # -11 means OOM -whitelist.add(r"('', 'out of memory\nout of memory\n', -11)") - - - -##################################################################### -# Program -##################################################################### - -# Options -parser = OptionParser(usage=usage) -parser.add_option("-r", "--regression", action="store", metavar="REGRESSION_COUNT", help=help, - type="int", dest="regression", default=None) - -(OPTIONS, args) = parser.parse_args() - - -if OPTIONS.regression != None: - # TODO: This should be expanded as we get a better hang of the OOM problems. - # For now, we'll just check that the number of OOMs in one short file does not - # increase. - files = ["../jit-test/tests/arguments/args-createontrace.js"] -else: - files = get_js_files() - - # Use a command-line arg to reduce the set of files - if len (args): - files = [f for f in files if f.find(args[0]) != -1] - - -if OPTIONS.regression == None: - # Don't use a logfile, this is automated for tinderbox. - log = file("../OOM_log", "w") - - -num_failures = 0 -for f in files: - - # Run it once to establish boundaries - command = (command_template + ' -O').format(f) - out, err, exit = run(command) - max = re.match(".*OOM max count: (\d+).*", out, flags=re.DOTALL).groups()[0] - max = int(max) - - # OOMs don't recover well for the first 20 allocations or so. - # TODO: revisit this. - for i in range(20, max): - - if OPTIONS.regression == None: - print("Testing allocation {0}/{1} in {2}".format(i,max,f)) - else: - sys.stdout.write('.') # something short for tinderbox, no space or \n - - command = (command_template + ' -A {0}').format(f, i) - out, err, exit = run(command) - - # Success (5 is SM's exit code for controlled errors) - if exit == 5 and err.find("out of memory") != -1: - continue - - # Failure - else: - - if OPTIONS.regression != None: - # Just count them - num_failures += 1 - continue - - ######################################################################### - # The regression tests ends above. The rest of this is for running the - # script manually. - ######################################################################### - - problem = str((out, err, exit)) - if in_blacklist(problem) and problem not in whitelist: - add_to_blacklist(problem) - continue - - add_to_blacklist(problem) - - - # Get valgrind output for a good stack trace - vcommand = "valgrind --dsymutil=yes -q --log-file=OOM_valgrind_log_file " + command - run(vcommand) - vout = file("OOM_valgrind_log_file").read() - vout = clean_voutput(vout) - sans_alloc_sites = remove_failed_allocation_backtraces(vout) - - # Don't print duplicate information - if in_blacklist(sans_alloc_sites): - add_to_blacklist(sans_alloc_sites) - continue - - add_to_blacklist(sans_alloc_sites) - - log.write ("\n") - log.write ("\n") - log.write ("=========================================================================") - log.write ("\n") - log.write ("An allocation failure at\n\tallocation {0}/{1} in {2}\n\t" - "causes problems (detected using bug 624094)" - .format(i, max, f)) - log.write ("\n") - log.write ("\n") - - log.write ("Command (from obj directory, using patch from bug 624094):\n " + command) - log.write ("\n") - log.write ("\n") - log.write ("stdout, stderr, exitcode:\n " + problem) - log.write ("\n") - log.write ("\n") - - double_free = err.find("pointer being freed was not allocated") != -1 - oom_detected = err.find("out of memory") != -1 - multiple_oom_detected = err.find("out of memory\nout of memory") != -1 - segfault_detected = exit == -11 - - log.write ("Diagnosis: ") - log.write ("\n") - if multiple_oom_detected: - log.write (" - Multiple OOMs reported") - log.write ("\n") - if segfault_detected: - log.write (" - segfault") - log.write ("\n") - if not oom_detected: - log.write (" - No OOM checking") - log.write ("\n") - if double_free: - log.write (" - Double free") - log.write ("\n") - - log.write ("\n") - - log.write ("Valgrind info:\n" + vout) - log.write ("\n") - log.write ("\n") - log.flush() - - if OPTIONS.regression == None: - count_lines() - -print() - -# Do the actual regression check -if OPTIONS.regression != None: - expected_num_failures = OPTIONS.regression - - if num_failures != expected_num_failures: - - print("TEST-UNEXPECTED-FAIL |", end='') - if num_failures > expected_num_failures: - print("More out-of-memory errors were found ({0}) than expected ({1}). " - "This probably means an allocation site has been added without a " - "NULL-check. If this is unavoidable, you can account for it by " - "updating Makefile.in.".format(num_failures, expected_num_failures), - end='') - else: - print("Congratulations, you have removed {0} out-of-memory error(s) " - "({1} remain)! Please account for it by updating Makefile.in." - .format(expected_num_failures - num_failures, num_failures), - end='') - sys.exit(-1) - else: - print('TEST-PASS | find_OOM_errors | Found the expected number of OOM ' - 'errors ({0})'.format(expected_num_failures)) - diff --git a/js/src/config/gcc_hidden.h b/js/src/config/gcc_hidden.h deleted file mode 100644 index 075e68c88bf..00000000000 --- a/js/src/config/gcc_hidden.h +++ /dev/null @@ -1,6 +0,0 @@ -/* This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ - -/* Begin all files as hidden visibility */ -#pragma GCC visibility push(hidden) diff --git a/js/src/config/make-system-wrappers.pl b/js/src/config/make-system-wrappers.pl deleted file mode 100644 index fa0873a78e0..00000000000 --- a/js/src/config/make-system-wrappers.pl +++ /dev/null @@ -1,26 +0,0 @@ -#!/usr/bin/perl -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -$output_dir = shift; - -while () { - chomp; - if (-e "$output_dir/$_") { - next; - } - - if (/(.*)\/[^\/*]/) { - mkdir "$output_dir/$1"; - } - - open OUT, ">$output_dir/$_"; - print OUT "#pragma GCC system_header\n"; # suppress include_next warning - print OUT "#pragma GCC visibility push(default)\n"; - print OUT "#include_next \<$_\>\n"; - print OUT "#pragma GCC visibility pop\n"; - close OUT; -} - diff --git a/js/src/config/makefiles/autotargets.mk b/js/src/config/makefiles/autotargets.mk deleted file mode 100644 index 16e06fb2a41..00000000000 --- a/js/src/config/makefiles/autotargets.mk +++ /dev/null @@ -1,94 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. -# - -ifndef INCLUDED_AUTOTARGETS_MK #{ - -# Conditional does not wrap the entire file so multiple -# includes will be able to accumulate dependencies. - -########################################################################### -# AUTO_DEPS - A list of deps/targets drived from other macros. -########################################################################### - -MKDIR ?= mkdir -p -TOUCH ?= touch - -# declare for local use, rules.mk may not have been loaded -space = $(NULL) $(NULL) - -# Deps will be considered intermediate when used as a pre-requisite for -# wildcard targets. Inhibit their removal, mkdir -p is a standalone op. -.PRECIOUS: %/.mkdir.done - -######################### -##---] FUNCTIONS [---## -######################### - -# Squeeze can be overzealous, restore root for abspath -getPathPrefix =$(if $(filter /%,$(1)),/) - -# Squeeze '//' from the path, easily created by string functions -_slashSqueeze =$(foreach val,$(getargv),$(call getPathPrefix,$(val))$(subst $(space),/,$(strip $(subst /,$(space),$(val))))) - -# Squeeze extraneous directory slashes from the path -# o protect embedded spaces within the path -# o replace //+ sequences with / -slash_strip = \ - $(strip \ - $(subst <--[**]-->,$(space),\ - $(call _slashSqueeze,\ - $(subst $(space),<--[**]-->,$(1))\ - ))) - -# Extract directory path from a dependency file. -mkdir_stem =$(foreach val,$(getargv),$(subst /.mkdir.done,$(NULL),$(val))) - -## Generate timestamp file for threadsafe directory creation -mkdir_deps =$(foreach dir,$(getargv),$(call slash_strip,$(dir)/.mkdir.done)) - -####################### -##---] TARGETS [---## -####################### - -%/.mkdir.done: # mkdir -p -p => mkdir -p - $(subst $(space)-p,$(null),$(MKDIR)) -p '$(dir $@)' -# Make the timestamp old enough for not being a problem with symbolic links -# targets depending on it. Use Jan 3, 1980 to accomodate any timezone where -# 198001010000 would translate to something older than FAT epoch. - @$(TOUCH) -t 198001030000 '$@' - -# A handful of makefiles are attempting "mkdir dot". -# tbpl/valgrind builds are using this target -# https://bugzilla.mozilla.org/show_bug.cgi?id=837754 -.mkdir.done: - @echo 'WARNING: $(MKDIR) -dot- requested by $(MAKE) -C $(CURDIR) $(MAKECMDGOALS)' - @$(TOUCH) -t 198001030000 '$@' - -INCLUDED_AUTOTARGETS_MK = 1 -endif #} - - -## Accumulate deps and cleanup -ifneq (,$(GENERATED_DIRS)) - GENERATED_DIRS := $(strip $(sort $(GENERATED_DIRS))) - tmpauto :=$(call mkdir_deps,GENERATED_DIRS) - GENERATED_DIRS_DEPS +=$(tmpauto) - GARBAGE_DIRS +=$(GENERATED_DIRS) -endif - -################################################################# -# One ring/dep to rule them all: -# config/rules.mk::all target is available by default -# Add $(AUTO_DEPS) as an explicit target dependency when needed. -################################################################# - -AUTO_DEPS +=$(GENERATED_DIRS_DEPS) -AUTO_DEPS := $(strip $(sort $(AUTO_DEPS))) - -# Complain loudly if deps have not loaded so getargv != $(NULL) -$(call requiredfunction,getargv) diff --git a/js/src/config/makefiles/debugmake.mk b/js/src/config/makefiles/debugmake.mk deleted file mode 100644 index 3c5a39741a7..00000000000 --- a/js/src/config/makefiles/debugmake.mk +++ /dev/null @@ -1,121 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. -# - -########################################################################### -## Intent: Helper targets for displaying variables and state information -########################################################################### - -# Support usage outside of config/rules.mk -ifndef INCLUDED_DEBUGMAKE_MK #{ - -define shell_quote -'$(subst ','\'',$(1))' -endef - -echo-variable-%: - @echo $(call shell_quote,$($*)) - -echo-tiers: - @echo $(TIERS) - -echo-tier-dirs: - @$(foreach tier,$(TIERS),echo '$(tier):'; echo ' dirs: $(tier_$(tier)_dirs)'; $(if $(tier_$(tier)_staticdirs),echo ' staticdirs: $(tier_$(tier)_staticdirs)';) ) - -echo-dirs: - @echo $(call shell_quote,$(DIRS)) - -define print_var -@printf '%20s = %s\n' $1 $(call shell_quote,$($1)) - -endef - -define print_vars -$(foreach var,$1,$(call print_var,$(var))) -endef - -showtargs: -ifneq (,$(filter $(PROGRAM) $(HOST_PROGRAM) $(SIMPLE_PROGRAMS) $(HOST_LIBRARY) $(LIBRARY) $(SHARED_LIBRARY),$(TARGETS))) - @echo -------------------------------------------------------------------------------- - $(call print_vars,\ - PROGRAM \ - SIMPLE_PROGRAMS \ - LIBRARY \ - SHARED_LIBRARY \ - SHARED_LIBRARY_LIBS \ - LIBS \ - DEF_FILE \ - IMPORT_LIBRARY \ - STATIC_LIBS \ - EXTRA_DSO_LDOPTS \ - DEPENDENT_LIBS \ - ) - @echo -------------------------------------------------------------------------------- -endif - $(LOOP_OVER_PARALLEL_DIRS) - $(LOOP_OVER_DIRS) - $(LOOP_OVER_TOOL_DIRS) - -showbuild: - $(call print_vars,\ - MOZ_BUILD_ROOT \ - MOZ_WIDGET_TOOLKIT \ - CC \ - CXX \ - CCC \ - CPP \ - LD \ - AR \ - IMPLIB \ - FILTER \ - MKSHLIB \ - MKCSHLIB \ - RC \ - MC \ - CFLAGS \ - OS_CFLAGS \ - COMPILE_CFLAGS \ - CXXFLAGS \ - OS_CXXFLAGS \ - COMPILE_CXXFLAGS \ - COMPILE_CMFLAGS \ - COMPILE_CMMFLAGS \ - LDFLAGS \ - OS_LDFLAGS \ - DSO_LDOPTS \ - OS_INCLUDES \ - OS_LIBS \ - EXTRA_LIBS \ - BIN_FLAGS \ - INCLUDES \ - DEFINES \ - ACDEFINES \ - BIN_SUFFIX \ - LIB_SUFFIX \ - DLL_SUFFIX \ - IMPORT_LIB_SUFFIX \ - INSTALL \ - VPATH \ - ) - -showhost: - $(call print_vars,\ - HOST_CC \ - HOST_CXX \ - HOST_CFLAGS \ - HOST_LDFLAGS \ - HOST_LIBS \ - HOST_EXTRA_LIBS \ - HOST_EXTRA_DEPS \ - HOST_PROGRAM \ - HOST_OBJS \ - HOST_PROGOBJS \ - HOST_LIBRARY \ - ) - -INCLUDED_DEBUGMAKE_MK = 1 -endif #} diff --git a/js/src/config/makefiles/functions.mk b/js/src/config/makefiles/functions.mk deleted file mode 100644 index d97b604f994..00000000000 --- a/js/src/config/makefiles/functions.mk +++ /dev/null @@ -1,34 +0,0 @@ -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# -# functions.mk -# -# Defines functions that are needed by various Makefiles throughout the build -# system, which are needed before config.mk can be included. -# - -# Define an include-at-most-once flag -ifdef INCLUDED_FUNCTIONS_MK -$(error Do not include functions.mk twice!) -endif -INCLUDED_FUNCTIONS_MK = 1 - -core_abspath = $(error core_abspath is unsupported, use $$(abspath) instead) -core_realpath = $(error core_realpath is unsupported) - -core_winabspath = $(error core_winabspath is unsupported) - -# Run a named Python build action. The first argument is the name of the build -# action. The second argument are the arguments to pass to the action (space -# delimited arguments). e.g. -# -# libs:: -# $(call py_action,purge_manifests,_build_manifests/purge/foo.manifest) -ifdef .PYMAKE -py_action = %mozbuild.action.$(1) main $(2) -else -py_action = $(PYTHON) -m mozbuild.action.$(1) $(2) -endif diff --git a/js/src/config/makefiles/java-build.mk b/js/src/config/makefiles/java-build.mk deleted file mode 100644 index b3f34ab1d03..00000000000 --- a/js/src/config/makefiles/java-build.mk +++ /dev/null @@ -1,113 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. - -ifndef INCLUDED_JAVA_BUILD_MK #{ - -ifdef JAVAFILES #{ -GENERATED_DIRS += classes - -export:: classes -classes: $(call mkdir_deps,classes) -endif #} JAVAFILES - - -ifdef ANDROID_APK_NAME #{ -android_res_dirs := $(addprefix $(srcdir)/,$(or $(ANDROID_RES_DIRS),res)) -_ANDROID_RES_FLAG := $(addprefix -S ,$(android_res_dirs)) -_ANDROID_ASSETS_FLAG := $(addprefix -A ,$(ANDROID_ASSETS_DIR)) - -GENERATED_DIRS += classes - -classes.dex: $(call mkdir_deps,classes) -classes.dex: R.java -classes.dex: $(ANDROID_APK_NAME).ap_ -classes.dex: $(JAVAFILES) - $(JAVAC) $(JAVAC_FLAGS) -d classes $(filter %.java,$^) - $(DX) --dex --output=$@ classes $(ANDROID_EXTRA_JARS) - -# R.java and $(ANDROID_APK_NAME).ap_ are both produced by aapt. To -# save an aapt invocation, we produce them both at the same time. - -R.java: .aapt.deps -$(ANDROID_APK_NAME).ap_: .aapt.deps - -# This uses the fact that Android resource directories list all -# resource files one subdirectory below the parent resource directory. -android_res_files := $(wildcard $(addsuffix /*,$(wildcard $(addsuffix /*,$(android_res_dirs))))) - -.aapt.deps: AndroidManifest.xml $(android_res_files) $(wildcard $(ANDROID_ASSETS_DIR)) - $(AAPT) package -f -M $< -I $(ANDROID_SDK)/android.jar $(_ANDROID_RES_FLAG) $(_ANDROID_ASSETS_FLAG) \ - -J ${@D} \ - -F $(ANDROID_APK_NAME).ap_ - @$(TOUCH) $@ - -$(ANDROID_APK_NAME)-unsigned-unaligned.apk: $(ANDROID_APK_NAME).ap_ classes.dex - cp $< $@ - $(ZIP) -0 $@ classes.dex - -$(ANDROID_APK_NAME)-unaligned.apk: $(ANDROID_APK_NAME)-unsigned-unaligned.apk - cp $< $@ - $(DEBUG_JARSIGNER) $@ - -$(ANDROID_APK_NAME).apk: $(ANDROID_APK_NAME)-unaligned.apk - $(ZIPALIGN) -f -v 4 $< $@ - -GARBAGE += \ - R.java \ - classes.dex \ - $(ANDROID_APK_NAME).ap_ \ - $(ANDROID_APK_NAME)-unsigned-unaligned.apk \ - $(ANDROID_APK_NAME)-unaligned.apk \ - $(ANDROID_APK_NAME).apk \ - $(NULL) - -JAVA_CLASSPATH := $(ANDROID_SDK)/android.jar -ifdef ANDROID_EXTRA_JARS #{ -JAVA_CLASSPATH := $(JAVA_CLASSPATH):$(subst $(NULL) ,:,$(strip $(ANDROID_EXTRA_JARS))) -endif #} ANDROID_EXTRA_JARS - -# Include Android specific java flags, instead of what's in rules.mk. -include $(topsrcdir)/config/android-common.mk -endif #} ANDROID_APK_NAME - - -ifdef JAVA_JAR_TARGETS #{ -# Arg 1: Output target name with .jar suffix, like jars/jarfile.jar. -# Intermediate class files are generated in jars/jarfile-classes. -# Arg 2: Java sources list. We use VPATH and $^ so sources can be -# relative to $(srcdir) or $(CURDIR). -# Arg 3: List of extra jars to link against. We do not use VPATH so -# jars must be relative to $(CURDIR). -# Arg 4: Additional JAVAC_FLAGS. -define java_jar_template -$(1): $(2) $(3) - $$(REPORT_BUILD) - @$$(NSINSTALL) -D $(1:.jar=)-classes - @$$(if $$(filter-out .,$$(@D)),$$(NSINSTALL) -D $$(@D)) - $$(JAVAC) $$(JAVAC_FLAGS)\ - $(4)\ - -d $(1:.jar=)-classes\ - $(if $(strip $(3)),-classpath $(subst $(NULL) ,:,$(strip $(3))))\ - $$(filter %.java,$$^) - $$(JAR) cMf $$@ -C $(1:.jar=)-classes . - -GARBAGE += $(1) - -GARBAGE_DIRS += $(1:.jar=)-classes -endef - -$(foreach jar,$(JAVA_JAR_TARGETS),\ - $(if $($(jar)_DEST),,$(error Missing $(jar)_DEST))\ - $(if $($(jar)_JAVAFILES),,$(error Missing $(jar)_JAVAFILES))\ - $(eval $(call java_jar_template,$($(jar)_DEST),$($(jar)_JAVAFILES) $($(jar)_PP_JAVAFILES),$($(jar)_EXTRA_JARS),$($(jar)_JAVAC_FLAGS)))\ -) -endif #} JAVA_JAR_TARGETS - - -INCLUDED_JAVA_BUILD_MK := 1 - -endif #} INCLUDED_JAVA_BUILD_MK diff --git a/js/src/config/makefiles/makeutils.mk b/js/src/config/makefiles/makeutils.mk deleted file mode 100644 index 0ae1044643c..00000000000 --- a/js/src/config/makefiles/makeutils.mk +++ /dev/null @@ -1,121 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. - -## Identify function argument types -istype =$(if $(value ${1}),list,scalar) -isval =$(if $(filter-out list,$(call istype,${1})),true) -isvar =$(if $(filter-out scalar,$(call istype,${1})),true) - -# Access up to 9 arguments passed, option needed to emulate $* -# Inline for function expansion, do not use $(call ) -argv =$(strip -argv +=$(if $(1), $(1))$(if $(2), $(2))$(if $(3), $(3))$(if $(4), $(4)) -argv +=$(if $(5), $(5))$(if $(6), $(6))$(if $(7), $(7))$(if $(8), $(8)) -argv +=$(if $(9), $(9)) -argv +=$(if $(10), $(error makeutils.mk::argv can only handle 9 arguments)) -argv +=) - -########################################################################### -## Access function args as a simple list, inline within user functions. -## Usage: $(info ** $(call banner,$(getargv))) -## $(call banner,scalar) -## $(call banner,list0 list1 list2) -## $(call banner,ref) ; ref=foo bar tans -## getarglist() would be a more accurate name but is longer to type -getargv = $(if $(call isvar,$(1)),$($(1)),$(argv)) - -########################################################################### -# Strip [n] leading options from an argument list. This will allow passing -# extra args to user functions that will not propogate to sub-$(call )'s -# Usage: $(call subargv,2) -subargv =$(wordlist $(1),$(words $(getargv)),$(getargv)) - -########################################################################### -# Intent: Display a distinct banner heading in the output stream -# Usage: $(call banner,BUILDING: foo bar tans) -# Debug: -# target-preqs = \ -# $(call banner,target-preqs-BEGIN) \ -# foo bar tans \ -# $(call banner,target-preqs-END) \ -# $(NULL) -# target: $(target-preqs) - -banner = \ -$(info ) \ -$(info ***************************************************************************) \ -$(info ** $(getargv)) \ -$(info ***************************************************************************) \ -$(NULL) - -##################################################################### -# Intent: Determine if a string or pattern is contained in a list -# Usage: strcmp - $(call if_XinY,clean,$(MAKECMDGOALS)) -# : pattern - $(call if_XinY,clean%,$(MAKECMDGOALS)) -is_XinY =$(filter $(1),$(call subargv,3,$(getargv))) - -##################################################################### -# Provide an alternate var to support testing -ifdef MAKEUTILS_UNIT_TEST - mcg_goals=TEST_MAKECMDGOALS -else - mcg_goals=MAKECMDGOALS -endif - -# Intent: Conditionals for detecting common/tier target use -isTargetStem = $(sort \ - $(foreach var,$(getargv),\ - $(foreach pat,$(var)% %$(var),\ - $(call is_XinY,$(pat),${$(mcg_goals)})\ - ))) -isTargetStemClean = $(call isTargetStem,clean) -isTargetStemExport = $(call isTargetStem,export) -isTargetStemLibs = $(call isTargetStem,libs) -isTargetStemTools = $(call isTargetStem,tools) - -################################################## -# Intent: Validation functions / unit test helpers - -errorifneq =$(if $(subst $(strip $(1)),$(NULL),$(strip $(2))),$(error expected [$(1)] but found [$(2)])) - -# Intent: verify function declaration exists -requiredfunction =$(foreach func,$(1) $(2) $(3) $(4) $(5) $(6) $(7) $(8) $(9),$(if $(value $(func)),$(NULL),$(error required function [$(func)] is unavailable))) - - - -## http://www.gnu.org/software/make/manual/make.html#Call-Function -## Usage: o = $(call map,origin,o map $(MAKE)) -map = $(foreach val,$(2),$(call $(1),$(val))) - - -## Disable checking for clean targets -ifeq (,$(filter %clean clean%,$(MAKECMDGOALS))) #{ - -# Usage: $(call checkIfEmpty,[error|warning] foo NULL bar) -checkIfEmpty =$(foreach var,$(wordlist 2,100,$(argv)),$(if $(strip $($(var))),$(NOP),$(call $(1),Variable $(var) does not contain a value))) - -# Usage: $(call errorIfEmpty,foo NULL bar) -errorIfEmpty =$(call checkIfEmpty,error $(argv)) -warnIfEmpty =$(call checkIfEmpty,warning $(argv)) - -endif #} - -########################################################################### -## Common makefile library loader -########################################################################### -topORerr =$(if $(topsrcdir),$(topsrcdir),$(error topsrcdir is not defined)) - -ifdef USE_AUTOTARGETS_MK # mkdir_deps - include $(topORerr)/config/makefiles/autotargets.mk -endif - -ifdef USE_RCS_MK - include $(topORerr)/config/makefiles/rcs.mk -endif - -## copy(src, dst): recursive copy -copy_dir = (cd $(1)/. && $(TAR) $(TAR_CREATE_FLAGS) - .) | (cd $(2)/. && tar -xf -) diff --git a/js/src/config/makefiles/mochitest.mk b/js/src/config/makefiles/mochitest.mk deleted file mode 100644 index 82182cbb998..00000000000 --- a/js/src/config/makefiles/mochitest.mk +++ /dev/null @@ -1,52 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. - -ifndef INCLUDED_TESTS_MOCHITEST_MK #{ - -# $1- test directory name -# $2- optional: if passed dot used to flatten directory hierarchy copy -# else- relativesrcdir -mochitestdir = \ - $(strip \ - $(if $(2),$(DEPTH)/_tests/testing/mochitest/$1/. \ - ,$(DEPTH)/_tests/testing/mochitest/$1/$(relativesrcdir) \ - )) - - -ifdef MOCHITEST_FILES -MOCHITEST_DEST := $(call mochitestdir,tests) -INSTALL_TARGETS += MOCHITEST -endif - -ifdef MOCHITEST_CHROME_FILES -MOCHITEST_CHROME_DEST := $(call mochitestdir,chrome) -INSTALL_TARGETS += MOCHITEST_CHROME -endif - -ifdef MOCHITEST_BROWSER_FILES -MOCHITEST_BROWSER_DEST := $(call mochitestdir,browser) -INSTALL_TARGETS += MOCHITEST_BROWSER -endif - -ifdef MOCHITEST_A11Y_FILES -MOCHITEST_A11Y_DEST := $(call mochitestdir,a11y) -INSTALL_TARGETS += MOCHITEST_A11Y -endif - -ifdef MOCHITEST_METRO_FILES -MOCHITEST_METRO_DEST := $(call mochitestdir,metro) -INSTALL_TARGETS += MOCHITEST_METRO -endif - -ifdef MOCHITEST_ROBOCOP_FILES -MOCHITEST_ROBOCOP_DEST := $(call mochitestdir,tests/robocop,flat_hierarchy) -INSTALL_TARGETS += MOCHITEST_ROBOCOP -endif - -INCLUDED_TESTS_MOCHITEST_MK := 1 - -endif #} INCLUDED_TESTS_MOCHITEST_MK diff --git a/js/src/config/makefiles/nonrecursive.mk b/js/src/config/makefiles/nonrecursive.mk deleted file mode 100644 index 498de568e72..00000000000 --- a/js/src/config/makefiles/nonrecursive.mk +++ /dev/null @@ -1,68 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# The purpose of this file is to pull in non-recursive targets when performing -# a partial tree (not top-level) build. This will allow people to continue to -# build individual directories while some of the targets may not be normally -# defined in that make file. -# -# Non-recursive targets are attached to existing make targets. The -# NONRECURSIVE_TARGETS variable lists the make targets that modified. For -# each target in this list, the NONRECURSIVE_TARGET_ variable will -# contain a list of partial variable names. We will then look in variables -# named NONRECURSIVE_TARGETS___* for information describing -# how to evaluate non-recursive make targets. -# -# Targets are defined by the following variables: -# -# FILE - The make file to evaluate. This is equivalent to -# |make -f | -# DIRECTORY - The directory whose Makefile to evaluate. This is -# equivalent to |make -C |. -# TARGETS - Targets to evaluate in that make file. -# -# Only 1 of FILE or DIRECTORY may be defined. -# -# For example: -# -# NONRECURSIVE_TARGETS = export libs -# NONRECURSIVE_TARGETS_export = headers -# NONRECURSIVE_TARGETS_export_headers_FILE = /path/to/exports.mk -# NONRECURSIVE_TARGETS_export_headers_TARGETS = $(DIST)/include/foo.h $(DIST)/include/bar.h -# NONRECURSIVE_TARGETS_libs = cppsrcs -# NONRECURSIVE_TARGETS_libs_cppsrcs_DIRECTORY = $(DEPTH)/foo -# NONRECURSIVE_TARGETS_libs_cppsrcs_TARGETS = /path/to/foo.o /path/to/bar.o -# -# Will get turned into the following: -# -# exports:: -# $(MAKE) -C $(DEPTH) -f /path/to/exports.mk $(DIST)/include/foo.h $(DIST)/include/bar.h -# -# libs:: -# $(MAKE) -C $(DEPTH)/foo /path/to/foo.o /path/to/bar.o - -ifndef INCLUDED_NONRECURSIVE_MK - -define define_nonrecursive_target -$(1):: - $$(MAKE) -C $(or $(4),$$(DEPTH)) $(addprefix -f ,$(3)) $(2) -endef - -$(foreach target,$(NONRECURSIVE_TARGETS), \ - $(foreach entry,$(NONRECURSIVE_TARGETS_$(target)), \ - $(eval $(call define_nonrecursive_target, \ - $(target), \ - $(NONRECURSIVE_TARGETS_$(target)_$(entry)_TARGETS), \ - $(NONRECURSIVE_TARGETS_$(target)_$(entry)_FILE), \ - $(NONRECURSIVE_TARGETS_$(target)_$(entry)_DIRECTORY), \ - )) \ - ) \ -) - -INCLUDED_NONRECURSIVE_MK := 1 -endif - diff --git a/js/src/config/makefiles/rcs.mk b/js/src/config/makefiles/rcs.mk deleted file mode 100644 index b9acada47b3..00000000000 --- a/js/src/config/makefiles/rcs.mk +++ /dev/null @@ -1,54 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. -# - -ifdef USE_RCS_MK #{ - -ifndef INCLUDED_RCS_MK #{ - -MOZ_RCS_TYPE_HG ?= $(notdir $(wildcard $(topsrcdir)/.hg)) -MOZ_RCS_TYPE_GIT ?= $(notdir $(wildcard $(topsrcdir)/.git)) - - -########################################################################### -# HAVE_MERCURIAL_RCS -########################################################################### -ifeq (.hg,$(MOZ_RCS_TYPE_HG)) #{ - -# Intent: Retrieve the http:// repository path for a directory. -# Usage: $(call getSourceRepo[,repo_dir|args]) -# Args: -# path (optional): repository to query. Defaults to $(topsrcdir) -getSourceRepo = \ - $(call FUNC_getSourceRepo,$(if $(1),cd $(1) && hg,hg --repository $(topsrcdir))) - -# return: http://hg.mozilla.org/mozilla-central -FUNC_getSourceRepo = \ - $(strip \ - $(patsubst %/,%,\ - $(patsubst ssh://%,http://%,\ - $(firstword $(shell $(getargv) showconfig paths.default))\ - ))) - -#} HAVE_MERCURIAL_RCS - -########################################################################### -# HAVE_GIT_RCS -########################################################################### -else ifeq (.git,$(MOZ_RCS_TYPE_GIT)) #{ - -GIT ?= git -getSourceRepo = \ - $(shell cd $(topsrcdir) && $(GIT) rev-parse --verify HEAD) - -endif #} HAVE_GIT_RCS - - -INCLUDED_RCS_MK := 1 -endif #} - -endif #} diff --git a/js/src/config/makefiles/target_binaries.mk b/js/src/config/makefiles/target_binaries.mk deleted file mode 100644 index 6bb79244761..00000000000 --- a/js/src/config/makefiles/target_binaries.mk +++ /dev/null @@ -1,122 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -ifdef EXPORT_LIBRARY -ifeq ($(EXPORT_LIBRARY),1) -ifdef IS_COMPONENT -EXPORT_LIBRARY = $(DEPTH)/staticlib/components -else -EXPORT_LIBRARY = $(DEPTH)/staticlib -endif -else -# If EXPORT_LIBRARY has a value, we'll be installing there. We also need to cleanup there -GARBAGE += $(foreach lib,$(LIBRARY),$(EXPORT_LIBRARY)/$(lib)) -endif -endif # EXPORT_LIBRARY - -binaries libs:: $(SUBMAKEFILES) $(TARGETS) -ifndef NO_DIST_INSTALL -ifdef SHARED_LIBRARY -ifdef IS_COMPONENT - $(INSTALL) $(IFLAGS2) $(SHARED_LIBRARY) $(FINAL_TARGET)/components -ifndef NO_COMPONENTS_MANIFEST - $(call py_action,buildlist,$(FINAL_TARGET)/chrome.manifest 'manifest components/components.manifest') - $(call py_action,buildlist,$(FINAL_TARGET)/components/components.manifest 'binary-component $(SHARED_LIBRARY)') -endif -endif # IS_COMPONENT -endif # SHARED_LIBRARY -endif # !NO_DIST_INSTALL - -ifndef NO_DIST_INSTALL - -ifneq (,$(strip $(PROGRAM)$(SIMPLE_PROGRAMS))) -PROGRAMS_EXECUTABLES = $(SIMPLE_PROGRAMS) $(PROGRAM) -PROGRAMS_DEST ?= $(FINAL_TARGET) -PROGRAMS_TARGET := binaries libs -INSTALL_TARGETS += PROGRAMS -endif - -ifdef LIBRARY -ifdef EXPORT_LIBRARY -LIBRARY_FILES = $(LIBRARY) -LIBRARY_DEST ?= $(EXPORT_LIBRARY) -LIBRARY_TARGET = binaries libs -INSTALL_TARGETS += LIBRARY -endif -ifdef DIST_INSTALL -ifdef IS_COMPONENT -$(error Shipping static component libs makes no sense.) -else -DIST_LIBRARY_FILES = $(LIBRARY) -DIST_LIBRARY_DEST ?= $(DIST)/lib -DIST_LIBRARY_TARGET = binaries libs -INSTALL_TARGETS += DIST_LIBRARY -endif -endif # DIST_INSTALL -endif # LIBRARY - - -ifdef SHARED_LIBRARY -ifndef IS_COMPONENT -SHARED_LIBRARY_FILES = $(SHARED_LIBRARY) -SHARED_LIBRARY_DEST ?= $(FINAL_TARGET) -SHARED_LIBRARY_TARGET = binaries libs -INSTALL_TARGETS += SHARED_LIBRARY - -ifneq (,$(filter OS2 WINNT,$(OS_ARCH))) -ifndef NO_INSTALL_IMPORT_LIBRARY -IMPORT_LIB_FILES = $(IMPORT_LIBRARY) -endif # NO_INSTALL_IMPORT_LIBRARY -else -IMPORT_LIB_FILES = $(SHARED_LIBRARY) -endif - -IMPORT_LIB_DEST ?= $(DIST)/lib -IMPORT_LIB_TARGET = binaries libs -ifdef IMPORT_LIB_FILES -INSTALL_TARGETS += IMPORT_LIB -endif - -endif # ! IS_COMPONENT -endif # SHARED_LIBRARY - -ifneq (,$(strip $(HOST_SIMPLE_PROGRAMS)$(HOST_PROGRAM))) -HOST_PROGRAMS_EXECUTABLES = $(HOST_SIMPLE_PROGRAMS) $(HOST_PROGRAM) -HOST_PROGRAMS_DEST ?= $(DIST)/host/bin -HOST_PROGRAMS_TARGET = binaries libs -INSTALL_TARGETS += HOST_PROGRAMS -endif - -ifdef HOST_LIBRARY -HOST_LIBRARY_FILES = $(HOST_LIBRARY) -HOST_LIBRARY_DEST ?= $(DIST)/host/lib -HOST_LIBRARY_TARGET = binaries libs -INSTALL_TARGETS += HOST_LIBRARY -endif - -endif # !NO_DIST_INSTALL - -ifdef MOZ_PSEUDO_DERECURSE -BINARIES_INSTALL_TARGETS := $(foreach category,$(INSTALL_TARGETS),$(if $(filter binaries,$($(category)_TARGET)),$(category))) - -# Fill a dependency file with all the binaries installed somewhere in $(DIST) -# and with dependencies on the relevant backend files. -BINARIES_PP := $(MDDEPDIR)/binaries.pp - -$(BINARIES_PP): Makefile $(wildcard backend.mk) $(call mkdir_deps,$(MDDEPDIR)) - @echo '$(strip $(foreach category,$(BINARIES_INSTALL_TARGETS),\ - $(foreach file,$($(category)_FILES) $($(category)_EXECUTABLES),\ - $($(category)_DEST)/$(notdir $(file)): $(file)%\ - )\ - ))binaries: Makefile $(wildcard backend.mk)' | tr % '\n' > $@ - -else -binaries:: - $(error The binaries target is not supported without MOZ_PSEUDO_DERECURSE) -endif - -# EOF diff --git a/js/src/config/milestone.pl b/js/src/config/milestone.pl deleted file mode 100644 index 9aad212d75f..00000000000 --- a/js/src/config/milestone.pl +++ /dev/null @@ -1,94 +0,0 @@ -#!/usr/bin/perl -w -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -use Getopt::Long; - -use strict; -use vars qw( - $OBJDIR - $SRCDIR - $TOPSRCDIR - $SCRIPTDIR - @TEMPLATE_FILE - $MILESTONE_FILE - $MILESTONE - $MILESTONE_NUM - @MILESTONE_PARTS - $MINI_VERSION - $MICRO_VERSION - $opt_debug - $opt_template - $opt_uaversion - $opt_symbolversion - $opt_help - ); - -$SCRIPTDIR = $0; -$SCRIPTDIR =~ s/[^\/]*$//; -push(@INC,$SCRIPTDIR); - -require "Moz/Milestone.pm"; - -&GetOptions('topsrcdir=s' => \$TOPSRCDIR, 'srcdir=s' => \$SRCDIR, 'objdir=s' => \$OBJDIR, 'debug', 'help', 'template', 'uaversion', 'symbolversion'); - -if (defined($opt_help)) { - &usage(); - exit; -} - -if (defined($opt_template)) { - @TEMPLATE_FILE = @ARGV; - if ($opt_debug) { - print("TEMPLATE_FILE = --@TEMPLATE_FILE--\n"); - } -} - -if (!defined($SRCDIR)) { $SRCDIR = '.'; } -if (!defined($OBJDIR)) { $OBJDIR = '.'; } - -$MILESTONE_FILE = "$TOPSRCDIR/config/milestone.txt"; -@MILESTONE_PARTS = (0, 0, 0, 0); - -# -# Grab milestone (top line of $MILESTONE_FILE that starts with a digit) -# -my $milestone = Moz::Milestone::getOfficialMilestone($MILESTONE_FILE); - -if (@TEMPLATE_FILE) { - my $TFILE; - - foreach $TFILE (@TEMPLATE_FILE) { - my $BUILT_FILE = "$OBJDIR/$TFILE"; - $TFILE = "$SRCDIR/$TFILE.tmpl"; - - if (-e $TFILE) { - - Moz::Milestone::build_file($TFILE,$BUILT_FILE); - - } else { - warn("$0: No such file $TFILE!\n"); - } - } -} elsif(defined($opt_uaversion)) { - # Only expose the major milestone in the UA string, hide the patch level - # (bugs 572659 and 870868). - my $uaversion = Moz::Milestone::getMilestoneMajor($milestone) . ".0"; - print "$uaversion\n"; -} elsif(defined($opt_symbolversion)) { - # Only expose major milestone and alpha version. Used for symbol versioning - # on Linux. - my $symbolversion = Moz::Milestone::getMilestoneMajor($milestone) . - Moz::Milestone::getMilestoneABWithNum($milestone); - print "$symbolversion\n"; -} else { - print "$milestone\n"; -} - -sub usage() { - print < /* OSF/1 requires this before grp.h, so put it first */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pathsub.h" - -#ifdef HAVE_GETOPT_H -#include -#endif - -#ifdef SUNOS4 -#include "sunos4.h" -#endif - -#ifdef NEXTSTEP -#include -#endif - -#ifdef __QNX__ -#include -#endif - -#ifdef NEED_S_ISLNK -#if !defined(S_ISLNK) && defined(S_IFLNK) -#define S_ISLNK(a) (((a) & S_IFMT) == S_IFLNK) -#endif -#endif - -#ifndef _DIRECTORY_SEPARATOR -#define _DIRECTORY_SEPARATOR "/" -#endif /* _DIRECTORY_SEPARATOR */ - -#ifdef NEED_FCHMOD_PROTO -extern int fchmod(int fildes, mode_t mode); -#endif - -static void -usage(void) -{ - fprintf(stderr, - "usage: %s [-C cwd] [-L linkprefix] [-m mode] [-o owner] [-g group]\n" - " %*s [-DdltR] file [file ...] directory\n", - program, (int) strlen(program), ""); - exit(2); -} - -static int -mkdirs(char *path, mode_t mode) -{ - char *cp; - struct stat sb; - int res; - int l; - - /* strip trailing "/." */ - l = strlen(path); - if(l > 1 && path[l - 1] == '.' && path[l - 2] == '/') - path[l - 2] = 0; - - while (*path == '/' && path[1] == '/') - path++; - for (cp = strrchr(path, '/'); cp && cp != path && *(cp - 1) == '/'; cp--); - if (cp && cp != path) { - *cp = '\0'; - if ((lstat(path, &sb) < 0 || !S_ISDIR(sb.st_mode)) && - mkdirs(path, mode) < 0) { - return -1; - } - *cp = '/'; - } - - res = mkdir(path, mode); - if ((res != 0) && (errno == EEXIST)) - return 0; - else - return res; -} - -static uid_t -touid(char *owner) -{ - struct passwd *pw; - uid_t uid; - char *cp; - - pw = getpwnam(owner); - if (pw) - return pw->pw_uid; - uid = strtol(owner, &cp, 0); - if (uid == 0 && cp == owner) - fail("cannot find uid for %s", owner); - return uid; -} - -static gid_t -togid(char *group) -{ - struct group *gr; - gid_t gid; - char *cp; - - gr = getgrnam(group); - if (gr) - return gr->gr_gid; - gid = strtol(group, &cp, 0); - if (gid == 0 && cp == group) - fail("cannot find gid for %s", group); - return gid; -} - -static void -copyfile( char *name, char *toname, mode_t mode, char *group, char *owner, - int dotimes, uid_t uid, gid_t gid ) -{ - int fromfd, tofd = -1, cc, wc, exists; - char buf[BUFSIZ], *bp; - struct stat sb, tosb; - struct utimbuf utb; - - exists = (lstat(toname, &tosb) == 0); - - fromfd = open(name, O_RDONLY); - if (fromfd < 0 || fstat(fromfd, &sb) < 0) - fail("cannot access %s", name); - if (exists) { - if (S_ISREG(tosb.st_mode)) { - /* See if we can open it. This is more reliable than 'access'. */ - tofd = open(toname, O_CREAT | O_WRONLY, 0666); - } - if (tofd < 0) { - (void) (S_ISDIR(tosb.st_mode) ? rmdir : unlink)(toname); - } - } - if (tofd < 0) { - tofd = open(toname, O_CREAT | O_WRONLY, 0666); - if (tofd < 0) - fail("cannot create %s", toname); - } - - bp = buf; - while ((cc = read(fromfd, bp, sizeof buf)) > 0) - { - while ((wc = write(tofd, bp, (unsigned int)cc)) > 0) - { - if ((cc -= wc) == 0) - break; - bp += wc; - } - if (wc < 0) - fail("cannot write to %s", toname); - } - if (cc < 0) - fail("cannot read from %s", name); - - if (ftruncate(tofd, sb.st_size) < 0) - fail("cannot truncate %s", toname); -#if !defined(VMS) - if (dotimes) - { - utb.actime = sb.st_atime; - utb.modtime = sb.st_mtime; - if (utime(toname, &utb) < 0) - fail("cannot set times of %s", toname); - } -#ifdef HAVE_FCHMOD - if (fchmod(tofd, mode) < 0) -#else - if (chmod(toname, mode) < 0) -#endif - fail("cannot change mode of %s", toname); -#endif - if ((owner || group) && fchown(tofd, uid, gid) < 0) - fail("cannot change owner of %s", toname); - - /* Must check for delayed (NFS) write errors on close. */ - if (close(tofd) < 0) - fail("cannot write to %s", toname); - close(fromfd); -#if defined(VMS) - if (chmod(toname, (mode & (S_IREAD | S_IWRITE))) < 0) - fail("cannot change mode of %s", toname); - if (dotimes) - { - utb.actime = sb.st_atime; - utb.modtime = sb.st_mtime; - if (utime(toname, &utb) < 0) - fail("cannot set times of %s", toname); - } -#endif -} - -static void -copydir( char *from, char *to, mode_t mode, char *group, char *owner, - int dotimes, uid_t uid, gid_t gid) -{ - int i; - DIR *dir; - struct dirent *ep; - struct stat sb; - char *base, *destdir, *direntry, *destentry; - - base = xbasename(from); - - /* create destination directory */ - destdir = xmalloc((unsigned int)(strlen(to) + 1 + strlen(base) + 1)); - sprintf(destdir, "%s%s%s", to, _DIRECTORY_SEPARATOR, base); - if (mkdirs(destdir, mode) != 0) { - fail("cannot make directory %s\n", destdir); - free(destdir); - return; - } - - if (!(dir = opendir(from))) { - fail("cannot open directory %s\n", from); - free(destdir); - return; - } - - direntry = xmalloc((unsigned int)PATH_MAX); - destentry = xmalloc((unsigned int)PATH_MAX); - - while ((ep = readdir(dir))) - { - if (strcmp(ep->d_name, ".") == 0 || strcmp(ep->d_name, "..") == 0) - continue; - - sprintf(direntry, "%s/%s", from, ep->d_name); - sprintf(destentry, "%s%s%s", destdir, _DIRECTORY_SEPARATOR, ep->d_name); - - if (stat(direntry, &sb) == 0 && S_ISDIR(sb.st_mode)) - copydir( direntry, destdir, mode, group, owner, dotimes, uid, gid ); - else - copyfile( direntry, destentry, mode, group, owner, dotimes, uid, gid ); - } - - free(destdir); - free(direntry); - free(destentry); - closedir(dir); -} - -int -main(int argc, char **argv) -{ - int onlydir, dodir, dolink, dorelsymlink, dotimes, opt, len, lplen, tdlen, bnlen, exists, fromfd, tofd, cc, wc; - mode_t mode = 0755; - char *linkprefix, *owner, *group, *cp, *cwd, *todir, *toname, *name, *base, *linkname, *bp, buf[BUFSIZ]; - uid_t uid; - gid_t gid; - struct stat sb, tosb, fromsb; - struct utimbuf utb; - - program = argv[0]; - cwd = linkname = linkprefix = owner = group = 0; - onlydir = dodir = dolink = dorelsymlink = dotimes = lplen = 0; - - while ((opt = getopt(argc, argv, "C:DdlL:Rm:o:g:t")) != EOF) { - switch (opt) { - case 'C': - cwd = optarg; - break; - case 'D': - onlydir = 1; - break; - case 'd': - dodir = 1; - break; - case 'L': - linkprefix = optarg; - lplen = strlen(linkprefix); - dolink = 1; - break; - case 'R': - dolink = dorelsymlink = 1; - break; - case 'm': - mode = strtoul(optarg, &cp, 8); - if (mode == 0 && cp == optarg) - usage(); - break; - case 'o': - owner = optarg; - break; - case 'g': - group = optarg; - break; - case 't': - dotimes = 1; - break; - default: - usage(); - } - } - - argc -= optind; - argv += optind; - if (argc < 2 - onlydir) - usage(); - - todir = argv[argc-1]; - if ((stat(todir, &sb) < 0 || !S_ISDIR(sb.st_mode)) && - mkdirs(todir, 0777) < 0) { - fail("cannot make directory %s", todir); - } - if (onlydir) - return 0; - - if (!cwd) { -#ifndef NEEDS_GETCWD -#ifndef GETCWD_CANT_MALLOC - cwd = getcwd(0, PATH_MAX); -#else - cwd = malloc(PATH_MAX + 1); - cwd = getcwd(cwd, PATH_MAX); -#endif -#else - cwd = malloc(PATH_MAX + 1); - cwd = getwd(cwd); -#endif - } - - xchdir(todir); -#ifndef NEEDS_GETCWD -#ifndef GETCWD_CANT_MALLOC - todir = getcwd(0, PATH_MAX); -#else - todir = malloc(PATH_MAX + 1); - todir = getcwd(todir, PATH_MAX); -#endif -#else - todir = malloc(PATH_MAX + 1); - todir = getwd(todir); -#endif - tdlen = strlen(todir); - xchdir(cwd); - tdlen = strlen(todir); - - uid = owner ? touid(owner) : (uid_t)(-1); - gid = group ? togid(group) : (gid_t)(-1); - - while (--argc > 0) { - name = *argv++; - len = strlen(name); - base = xbasename(name); - bnlen = strlen(base); - toname = xmalloc((unsigned int)(tdlen + 1 + bnlen + 1)); - sprintf(toname, "%s%s%s", todir, _DIRECTORY_SEPARATOR, base); - exists = (lstat(toname, &tosb) == 0); - - if (dodir) { - /* -d means create a directory, always */ - if (exists && !S_ISDIR(tosb.st_mode)) { - (void) unlink(toname); - exists = 0; - } - if (!exists && mkdir(toname, mode) < 0) - fail("cannot make directory %s", toname); - if ((owner || group) && chown(toname, uid, gid) < 0) - fail("cannot change owner of %s", toname); - } else if (dolink) { - if (access(name, R_OK) != 0) { - fail("cannot access %s", name); - } - if (*name == '/') { - /* source is absolute pathname, link to it directly */ - linkname = 0; - } else { - if (linkprefix) { - /* -L prefixes names with a $cwd arg. */ - len += lplen + 1; - linkname = xmalloc((unsigned int)(len + 1)); - sprintf(linkname, "%s/%s", linkprefix, name); - } else if (dorelsymlink) { - /* Symlink the relative path from todir to source name. */ - linkname = xmalloc(PATH_MAX); - - if (*todir == '/') { - /* todir is absolute: skip over common prefix. */ - lplen = relatepaths(todir, cwd, linkname); - strcpy(linkname + lplen, name); - } else { - /* todir is named by a relative path: reverse it. */ - reversepath(todir, name, len, linkname); - xchdir(cwd); - } - - len = strlen(linkname); - } - name = linkname; - } - - /* Check for a pre-existing symlink with identical content. */ - if ((exists && (!S_ISLNK(tosb.st_mode) || - readlink(toname, buf, sizeof buf) != len || - strncmp(buf, name, (unsigned int)len) != 0)) || - ((stat(name, &fromsb) == 0) && - (fromsb.st_mtime > tosb.st_mtime))) { - (void) (S_ISDIR(tosb.st_mode) ? rmdir : unlink)(toname); - exists = 0; - } - if (!exists && symlink(name, toname) < 0) - fail("cannot make symbolic link %s", toname); -#ifdef HAVE_LCHOWN - if ((owner || group) && lchown(toname, uid, gid) < 0) - fail("cannot change owner of %s", toname); -#endif - - if (linkname) { - free(linkname); - linkname = 0; - } - } else { - /* Copy from name to toname, which might be the same file. */ - if( stat(name, &sb) == 0 && S_IFDIR & sb.st_mode ) - { - /* then is directory: must explicitly create destination dir */ - /* and manually copy files over */ - copydir( name, todir, mode, group, owner, dotimes, uid, gid ); - } - else - { - copyfile(name, toname, mode, group, owner, dotimes, uid, gid); - } - } - - free(toname); - } - - free(cwd); - free(todir); - return 0; -} diff --git a/js/src/config/nsinstall.py b/js/src/config/nsinstall.py deleted file mode 100644 index ae6132752bb..00000000000 --- a/js/src/config/nsinstall.py +++ /dev/null @@ -1,180 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -# This is a partial python port of nsinstall. -# It's intended to be used when there's no natively compile nsinstall -# available, and doesn't intend to be fully equivalent. -# Its major use is for l10n repackaging on systems that don't have -# a full build environment set up. -# The basic limitation is, it doesn't even try to link and ignores -# all related options. -from __future__ import print_function -from optparse import OptionParser -import os -import os.path -import sys -import shutil -import stat - -def _nsinstall_internal(argv): - usage = "usage: %prog [options] arg1 [arg2 ...] target-directory" - p = OptionParser(usage=usage) - - p.add_option('-D', action="store_true", - help="Create a single directory only") - p.add_option('-t', action="store_true", - help="Preserve time stamp") - p.add_option('-m', action="store", - help="Set mode", metavar="mode") - p.add_option('-d', action="store_true", - help="Create directories in target") - p.add_option('-R', action="store_true", - help="Use relative symbolic links (ignored)") - p.add_option('-L', action="store", metavar="linkprefix", - help="Link prefix (ignored)") - p.add_option('-X', action="append", metavar="file", - help="Ignore a file when installing a directory recursively.") - - # The remaining arguments are not used in our tree, thus they're not - # implented. - def BadArg(option, opt, value, parser): - parser.error('option not supported: {0}'.format(opt)) - - p.add_option('-C', action="callback", metavar="CWD", - callback=BadArg, - help="NOT SUPPORTED") - p.add_option('-o', action="callback", callback=BadArg, - help="Set owner (NOT SUPPORTED)", metavar="owner") - p.add_option('-g', action="callback", callback=BadArg, - help="Set group (NOT SUPPORTED)", metavar="group") - - (options, args) = p.parse_args(argv) - - if options.m: - # mode is specified - try: - options.m = int(options.m, 8) - except: - sys.stderr.write('nsinstall: {0} is not a valid mode\n' - .format(options.m)) - return 1 - - # just create one directory? - def maybe_create_dir(dir, mode, try_again): - dir = os.path.abspath(dir) - if os.path.exists(dir): - if not os.path.isdir(dir): - print('nsinstall: {0} is not a directory'.format(dir), file=sys.stderr) - return 1 - if mode: - os.chmod(dir, mode) - return 0 - - try: - if mode: - os.makedirs(dir, mode) - else: - os.makedirs(dir) - except Exception as e: - # We might have hit EEXIST due to a race condition (see bug 463411) -- try again once - if try_again: - return maybe_create_dir(dir, mode, False) - print("nsinstall: failed to create directory {0}: {1}".format(dir, e)) - return 1 - else: - return 0 - - if options.X: - options.X = [os.path.abspath(p) for p in options.X] - - if options.D: - return maybe_create_dir(args[0], options.m, True) - - # nsinstall arg1 [...] directory - if len(args) < 2: - p.error('not enough arguments') - - def copy_all_entries(entries, target): - for e in entries: - e = os.path.abspath(e) - if options.X and e in options.X: - continue - - dest = os.path.join(target, os.path.basename(e)) - dest = os.path.abspath(dest) - handleTarget(e, dest) - if options.m: - os.chmod(dest, options.m) - - # set up handler - if options.d: - # we're supposed to create directories - def handleTarget(srcpath, targetpath): - # target directory was already created, just use mkdir - os.mkdir(targetpath) - else: - # we're supposed to copy files - def handleTarget(srcpath, targetpath): - if os.path.isdir(srcpath): - if not os.path.exists(targetpath): - os.mkdir(targetpath) - entries = [os.path.join(srcpath, e) for e in os.listdir(srcpath)] - copy_all_entries(entries, targetpath) - # options.t is not relevant for directories - if options.m: - os.chmod(targetpath, options.m) - else: - if os.path.exists(targetpath): - # On Windows, read-only files can't be deleted - os.chmod(targetpath, stat.S_IWUSR) - os.remove(targetpath) - if options.t: - shutil.copy2(srcpath, targetpath) - else: - shutil.copy(srcpath, targetpath) - - # the last argument is the target directory - target = args.pop() - # ensure target directory (importantly, we do not apply a mode to the directory - # because we want to copy files into it and the mode might be read-only) - rv = maybe_create_dir(target, None, True) - if rv != 0: - return rv - - copy_all_entries(args, target) - return 0 - -# nsinstall as a native command is always UTF-8 -def nsinstall(argv): - return _nsinstall_internal([unicode(arg, "utf-8") for arg in argv]) - -if __name__ == '__main__': - # sys.argv corrupts characters outside the system code page on Windows - # . Use ctypes instead. This is also - # useful because switching to Unicode strings makes python use the wide - # Windows APIs, which is what we want here since the wide APIs normally do a - # better job at handling long paths and such. - if sys.platform == "win32": - import ctypes - from ctypes import wintypes - GetCommandLine = ctypes.windll.kernel32.GetCommandLineW - GetCommandLine.argtypes = [] - GetCommandLine.restype = wintypes.LPWSTR - - CommandLineToArgv = ctypes.windll.shell32.CommandLineToArgvW - CommandLineToArgv.argtypes = [wintypes.LPWSTR, ctypes.POINTER(ctypes.c_int)] - CommandLineToArgv.restype = ctypes.POINTER(wintypes.LPWSTR) - - argc = ctypes.c_int(0) - argv_arr = CommandLineToArgv(GetCommandLine(), ctypes.byref(argc)) - # The first argv will be "python", the second will be the .py file - argv = argv_arr[1:argc.value] - else: - # For consistency, do it on Unix as well - if sys.stdin.encoding is not None: - argv = [unicode(arg, sys.stdin.encoding) for arg in sys.argv] - else: - argv = [unicode(arg) for arg in sys.argv] - - sys.exit(_nsinstall_internal(argv[1:])) diff --git a/js/src/config/pathsub.c b/js/src/config/pathsub.c deleted file mode 100644 index 18a597b2d3b..00000000000 --- a/js/src/config/pathsub.c +++ /dev/null @@ -1,215 +0,0 @@ -/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ -/* This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ -/* -** Pathname subroutines. -** -** Brendan Eich, 8/29/95 -*/ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pathsub.h" - -#ifdef USE_REENTRANT_LIBC -#include -#endif - -#ifdef SUNOS4 -#include "sunos4.h" -#endif - -#ifndef D_INO -#define D_INO d_ino -#endif - -char *program; - -void -fail(char *format, ...) -{ - int error; - va_list ap; - -#ifdef USE_REENTRANT_LIBC - R_STRERROR_INIT_R(); -#endif - - error = errno; - fprintf(stderr, "%s: ", program); - va_start(ap, format); - vfprintf(stderr, format, ap); - va_end(ap); - if (error) { - -#ifdef USE_REENTRANT_LIBC - R_STRERROR_R(errno); - fprintf(stderr, ": %s", r_strerror_r); -#else - fprintf(stderr, ": %s", strerror(errno)); -#endif - } - - putc('\n', stderr); - exit(1); -} - -char * -getcomponent(char *path, char *name) -{ - if (*path == '\0') - return 0; - if (*path == '/') { - *name++ = '/'; - } else { - do { - *name++ = *path++; - } while (*path != '/' && *path != '\0'); - } - *name = '\0'; - while (*path == '/') - path++; - return path; -} - -#ifdef LAME_READDIR -#include -/* -** The static buffer in Unixware's readdir is too small. -*/ -struct dirent *readdir(DIR *d) -{ - static struct dirent *buf = NULL; - - if(buf == NULL) - buf = (struct dirent *) malloc(sizeof(struct dirent) + MAXPATHLEN); - return(readdir_r(d, buf)); -} -#endif - -char * -ino2name(ino_t ino) -{ - DIR *dp; - struct dirent *ep; - char *name; - - dp = opendir(".."); - if (!dp) - fail("cannot read parent directory"); - for (;;) { - if (!(ep = readdir(dp))) - fail("cannot find current directory"); - if (ep->D_INO == ino) - break; - } - name = xstrdup(ep->d_name); - closedir(dp); - return name; -} - -void * -xmalloc(size_t size) -{ - void *p = malloc(size); - if (!p) - fail("cannot allocate %u bytes", size); - return p; -} - -char * -xstrdup(char *s) -{ - return strcpy(xmalloc(strlen(s) + 1), s); -} - -char * -xbasename(char *path) -{ - char *cp; - - while ((cp = strrchr(path, '/')) && cp[1] == '\0') - *cp = '\0'; - if (!cp) return path; - return cp + 1; -} - -void -xchdir(char *dir) -{ - if (chdir(dir) < 0) - fail("cannot change directory to %s", dir); -} - -int -relatepaths(char *from, char *to, char *outpath) -{ - char *cp, *cp2; - int len; - char buf[NAME_MAX]; - - assert(*from == '/' && *to == '/'); - for (cp = to, cp2 = from; *cp == *cp2; cp++, cp2++) - if (*cp == '\0') - break; - while (cp[-1] != '/') - cp--, cp2--; - if (cp - 1 == to) { - /* closest common ancestor is /, so use full pathname */ - len = strlen(strcpy(outpath, to)); - if (outpath[len] != '/') { - outpath[len++] = '/'; - outpath[len] = '\0'; - } - } else { - len = 0; - while ((cp2 = getcomponent(cp2, buf)) != 0) { - strcpy(outpath + len, "../"); - len += 3; - } - while ((cp = getcomponent(cp, buf)) != 0) { - sprintf(outpath + len, "%s/", buf); - len += strlen(outpath + len); - } - } - return len; -} - -void -reversepath(char *inpath, char *name, int len, char *outpath) -{ - char *cp, *cp2; - char buf[NAME_MAX]; - struct stat sb; - - cp = strcpy(outpath + PATH_MAX - (len + 1), name); - cp2 = inpath; - while ((cp2 = getcomponent(cp2, buf)) != 0) { - if (strcmp(buf, ".") == 0) - continue; - if (strcmp(buf, "..") == 0) { - if (stat(".", &sb) < 0) - fail("cannot stat current directory"); - name = ino2name(sb.st_ino); - len = strlen(name); - cp -= len + 1; - strcpy(cp, name); - cp[len] = '/'; - free(name); - xchdir(".."); - } else { - cp -= 3; - strncpy(cp, "../", 3); - xchdir(buf); - } - } - strcpy(outpath, cp); -} diff --git a/js/src/config/pathsub.h b/js/src/config/pathsub.h deleted file mode 100644 index adb46032d2d..00000000000 --- a/js/src/config/pathsub.h +++ /dev/null @@ -1,42 +0,0 @@ -/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ -/* This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ - -#ifndef pathsub_h___ -#define pathsub_h___ -/* -** Pathname subroutines. -** -** Brendan Eich, 8/29/95 -*/ -#include -#include - -#ifndef PATH_MAX -#define PATH_MAX 1024 -#endif - -/* - * Just prevent stupidity - */ -#undef NAME_MAX -#define NAME_MAX 256 - -extern char *program; - -extern void fail(char *format, ...); -extern char *getcomponent(char *path, char *name); -extern char *ino2name(ino_t ino); -extern void *xmalloc(size_t size); -extern char *xstrdup(char *s); -extern char *xbasename(char *path); -extern void xchdir(char *dir); - -/* Relate absolute pathnames from and to returning the result in outpath. */ -extern int relatepaths(char *from, char *to, char *outpath); - -/* XXX changes current working directory -- caveat emptor */ -extern void reversepath(char *inpath, char *name, int len, char *outpath); - -#endif /* pathsub_h___ */ diff --git a/js/src/config/pythonpath.py b/js/src/config/pythonpath.py deleted file mode 100644 index 03180661481..00000000000 --- a/js/src/config/pythonpath.py +++ /dev/null @@ -1,56 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -""" -Run a python script, adding extra directories to the python path. -""" - - -def main(args): - def usage(): - print >>sys.stderr, "pythonpath.py -I directory script.py [args...]" - sys.exit(150) - - paths = [] - - while True: - try: - arg = args[0] - except IndexError: - usage() - - if arg == '-I': - args.pop(0) - try: - path = args.pop(0) - except IndexError: - usage() - - paths.append(os.path.abspath(path)) - continue - - if arg.startswith('-I'): - paths.append(os.path.abspath(args.pop(0)[2:])) - continue - - break - - script = args[0] - - sys.path[0:0] = [os.path.abspath(os.path.dirname(script))] + paths - sys.argv = args - sys.argc = len(args) - - frozenglobals['__name__'] = '__main__' - frozenglobals['__file__'] = script - - execfile(script, frozenglobals) - -# Freeze scope here ... why this makes things work I have no idea ... -frozenglobals = globals() - -import sys, os - -if __name__ == '__main__': - main(sys.argv[1:]) diff --git a/js/src/config/rebuild_check.py b/js/src/config/rebuild_check.py deleted file mode 100644 index a6c3dc87acd..00000000000 --- a/js/src/config/rebuild_check.py +++ /dev/null @@ -1,44 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -import os -import errno - -def mtime(path): - try: - return os.stat(path).st_mtime - except OSError as e: - if e.errno == errno.ENOENT: - return -1 - raise - -def rebuild_check(args): - target = args[0] - deps = args[1:] - t = mtime(target) - if t < 0: - print target - return - - newer = [] - removed = [] - for dep in deps: - deptime = mtime(dep) - if deptime < 0: - removed.append(dep) - elif mtime(dep) > t: - newer.append(dep) - - if newer and removed: - print 'Rebuilding %s because %s changed and %s was removed' % (target, ', '.join(newer), ', '.join(removed)) - elif newer: - print 'Rebuilding %s because %s changed' % (target, ', '.join(newer)) - elif removed: - print 'Rebuilding %s because %s was removed' % (target, ', '.join(removed)) - else: - print 'Rebuilding %s for an unknown reason' % target - -if __name__ == '__main__': - import sys - rebuild_check(sys.argv[1:]) diff --git a/js/src/config/recurse.mk b/js/src/config/recurse.mk deleted file mode 100644 index 07dfa9d51e2..00000000000 --- a/js/src/config/recurse.mk +++ /dev/null @@ -1,243 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. - -ifndef INCLUDED_RULES_MK -include $(topsrcdir)/config/rules.mk -endif - -# The traditional model of directory traversal with make is as follows: -# make -C foo -# Entering foo -# make -C bar -# Entering foo/bar -# make -C baz -# Entering foo/baz -# make -C qux -# Entering qux -# -# Pseudo derecurse transforms the above into: -# make -C foo -# make -C foo/bar -# make -C foo/baz -# make -C qux - -# MOZ_PSEUDO_DERECURSE can have values other than 1. -ifeq (1_.,$(if $(MOZ_PSEUDO_DERECURSE),1)_$(DEPTH)) - -include root.mk - -# Disable build status for mach in top directories without TIERS. -# In practice this disables it when recursing under js/src, which confuses mach. -ifndef TIERS -BUILDSTATUS = -endif - -# Main rules (export, compile, binaries, libs and tools) call recurse_* rules. -# This wrapping is only really useful for build status. -compile binaries libs export tools:: - $(call BUILDSTATUS,TIER_START $@ $($@_subtiers)) - +$(MAKE) recurse_$@ - $(call BUILDSTATUS,TIER_FINISH $@) - -# Carefully avoid $(eval) type of rule generation, which makes pymake slower -# than necessary. -# Get current tier and corresponding subtiers from the data in root.mk. -CURRENT_TIER := $(filter $(foreach tier,compile binaries libs export tools,recurse_$(tier) $(tier)-deps),$(MAKECMDGOALS)) -ifneq (,$(filter-out 0 1,$(words $(CURRENT_TIER)))) -$(error $(CURRENT_TIER) not supported on the same make command line) -endif -CURRENT_TIER := $(subst recurse_,,$(CURRENT_TIER:-deps=)) -CURRENT_SUBTIERS := $($(CURRENT_TIER)_subtiers) - -# The rules here are doing directory traversal, so we don't want further -# recursion to happen when running make -C subdir $tier. But some make files -# further call make -C something else, and sometimes expect recursion to -# happen in that case (see browser/metro/locales/Makefile.in for example). -# Conveniently, every invocation of make increases MAKELEVEL, so only stop -# recursion from happening at current MAKELEVEL + 1. -ifdef CURRENT_TIER -ifeq (0,$(MAKELEVEL)) -export NO_RECURSE_MAKELEVEL=1 -else -export NO_RECURSE_MAKELEVEL=$(word $(MAKELEVEL),2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20) -endif -endif - -# Get all directories traversed for all subtiers in the current tier, or use -# directly the $(*_dirs) variables available in root.mk when there is no -# TIERS (like for js/src). -CURRENT_DIRS := $(or $($(CURRENT_TIER)_dirs),$(foreach subtier,$(CURRENT_SUBTIERS),$($(CURRENT_TIER)_subtier_$(subtier)))) - -ifneq (,$(filter binaries libs,$(CURRENT_TIER))) -WANT_STAMPS = 1 -STAMP_TOUCH = $(TOUCH) $(@D)/binaries -endif - -# Subtier delimiter rules -$(addprefix subtiers/,$(addsuffix _start/$(CURRENT_TIER),$(CURRENT_SUBTIERS))): subtiers/%_start/$(CURRENT_TIER): $(if $(WANT_STAMPS),$(call mkdir_deps,subtiers/%_start)) - $(call BUILDSTATUS,SUBTIER_START $(CURRENT_TIER) $* $(if $(BUG_915535_FIXED),$($(CURRENT_TIER)_subtier_$*))) - @$(STAMP_TOUCH) - -$(addprefix subtiers/,$(addsuffix _finish/$(CURRENT_TIER),$(CURRENT_SUBTIERS))): subtiers/%_finish/$(CURRENT_TIER): $(if $(WANT_STAMPS),$(call mkdir_deps,subtiers/%_finish)) - $(call BUILDSTATUS,SUBTIER_FINISH $(CURRENT_TIER) $*) - @$(STAMP_TOUCH) - -$(addprefix subtiers/,$(addsuffix /$(CURRENT_TIER),$(CURRENT_SUBTIERS))): %/$(CURRENT_TIER): $(if $(WANT_STAMPS),$(call mkdir_deps,%)) - @$(STAMP_TOUCH) - -GARBAGE_DIRS += subtiers - -# Recursion rule for all directories traversed for all subtiers in the -# current tier. -# root.mk defines subtier_of_* variables, that map a normalized subdir path to -# a subtier name (e.g. subtier_of_memory_jemalloc = base) -$(addsuffix /$(CURRENT_TIER),$(CURRENT_DIRS)): %/$(CURRENT_TIER): -ifdef BUG_915535_FIXED - $(call BUILDSTATUS,TIERDIR_START $(CURRENT_TIER) $(subtier_of_$(subst /,_,$*)) $*) -endif - +@$(MAKE) -C $* $(if $(filter $*,$(tier_$(subtier_of_$(subst /,_,$*))_staticdirs)),,$(CURRENT_TIER)) -# Ensure existing stamps are up-to-date, but don't create one if submake didn't create one. - $(if $(wildcard $@),@$(STAMP_TOUCH)) -ifdef BUG_915535_FIXED - $(call BUILDSTATUS,TIERDIR_FINISH $(CURRENT_TIER) $(subtier_of_$(subst /,_,$*)) $*) -endif - -# Dummy rules for possibly inexisting dependencies for the above tier targets -$(addsuffix /Makefile,$(CURRENT_DIRS)) $(addsuffix /backend.mk,$(CURRENT_DIRS)): - -# The export tier requires nsinstall, which is built from config. So every -# subdirectory traversal needs to happen after traversing config. -ifeq ($(CURRENT_TIER),export) -$(addsuffix /$(CURRENT_TIER),$(filter-out config,$(CURRENT_DIRS))): config/$(CURRENT_TIER) -endif - -ifdef COMPILE_ENVIRONMENT -ifneq (,$(filter libs binaries,$(CURRENT_TIER))) -# When doing a "libs" build, target_libs.mk ensures the interesting dependency data -# is available in the "binaries" stamp. Once recursion is done, aggregate all that -# dependency info so that stamps depend on relevant files and relevant other stamps. -# When doing a "binaries" build, the aggregate dependency file and those stamps are -# used and allow to skip recursing directories where changes are not going to require -# rebuild. A few directories, however, are still traversed all the time, mostly, the -# gyp managed ones and js/src. -# A few things that are not traversed by a "binaries" build, but should, in an ideal -# world, are nspr, nss, icu and ffi. -recurse_$(CURRENT_TIER): - @$(MAKE) binaries-deps - -# Creating binaries-deps.mk directly would make us build it twice: once when beginning -# the build because of the include, and once at the end because of the stamps. -binaries-deps: $(addsuffix /binaries,$(CURRENT_DIRS)) - @$(call py_action,link_deps,-o $@.mk --group-by-depfile --topsrcdir $(topsrcdir) --topobjdir $(DEPTH) --dist $(DIST) --guard $(addprefix ',$(addsuffix ',$^))) - @$(TOUCH) $@ - -ifeq (recurse_binaries,$(MAKECMDGOALS)) -$(call include_deps,binaries-deps.mk) -endif - -endif - -DIST_GARBAGE += binaries-deps.mk binaries-deps - -endif - -else - -# Don't recurse if MAKELEVEL is NO_RECURSE_MAKELEVEL as defined above, but -# still recurse for externally managed make files (gyp-generated ones). -ifeq ($(EXTERNALLY_MANAGED_MAKE_FILE)_$(NO_RECURSE_MAKELEVEL),_$(MAKELEVEL)) - -compile binaries libs export tools:: - -else -######################### -# Tier traversal handling -######################### - -ifdef TIERS - -libs export tools:: - $(call BUILDSTATUS,TIER_START $@ $(filter-out $(if $(filter export,$@),,precompile),$(TIERS))) - $(foreach tier,$(TIERS), $(if $(filter-out libs_precompile tools_precompile,$@_$(tier)), \ - $(call BUILDSTATUS,SUBTIER_START $@ $(tier) $(if $(filter libs,$@),$(tier_$(tier)_staticdirs)) $(tier_$(tier)_dirs)) \ - $(if $(filter libs,$@),$(foreach dir, $(tier_$(tier)_staticdirs), $(call TIER_DIR_SUBMAKE,$@,$(tier),$(dir),,1))) \ - $(foreach dir, $(tier_$(tier)_dirs), $(call TIER_DIR_SUBMAKE,$@,$(tier),$(dir),$@)) \ - $(call BUILDSTATUS,SUBTIER_FINISH $@ $(tier)))) - $(call BUILDSTATUS,TIER_FINISH $@) - -else - -define CREATE_SUBTIER_TRAVERSAL_RULE -PARALLEL_DIRS_$(1) = $$(addsuffix _$(1),$$(PARALLEL_DIRS)) - -.PHONY: $(1) $$(PARALLEL_DIRS_$(1)) - -ifdef PARALLEL_DIRS -$$(PARALLEL_DIRS_$(1)): %_$(1): %/Makefile - +@$$(call SUBMAKE,$(1),$$*) -endif - -$(1):: $$(SUBMAKEFILES) -ifdef PARALLEL_DIRS - +@$(MAKE) $$(PARALLEL_DIRS_$(1)) -endif - $$(LOOP_OVER_DIRS) - -endef - -$(foreach subtier,export compile binaries libs tools,$(eval $(call CREATE_SUBTIER_TRAVERSAL_RULE,$(subtier)))) - -tools export:: $(SUBMAKEFILES) - $(LOOP_OVER_TOOL_DIRS) - -endif # ifdef TIERS - -endif # ifeq ($(EXTERNALLY_MANAGED_MAKE_FILE)_$(NO_RECURSE_MAKELEVEL),_$(MAKELEVEL)) - -endif # ifeq (1_.,$(MOZ_PSEUDO_DERECURSE)_$(DEPTH)) - -ifdef MOZ_PSEUDO_DERECURSE -ifdef EXTERNALLY_MANAGED_MAKE_FILE -# gyp-managed directories -recurse_targets := $(addsuffix /binaries,$(DIRS) $(PARALLEL_DIRS)) -else -ifeq (.,$(DEPTH)) -# top-level directories -recurse_targets := $(addsuffix /binaries,$(binaries_dirs)) -ifdef recurse_targets -# only js/src has binaries_dirs, and we want to adjust paths for it. -want_abspaths = 1 -endif -endif -endif - -ifdef COMPILE_ENVIRONMENT - -# Aggregate all dependency files relevant to a binaries build except in -# the mozilla top-level directory. -ifneq (_.,$(recurse_targets)_$(DEPTH)) -ALL_DEP_FILES := \ - $(BINARIES_PP) \ - $(addsuffix .pp,$(addprefix $(MDDEPDIR)/,$(sort \ - $(TARGETS) \ - $(filter-out $(SOBJS) $(ASOBJS) $(EXCLUDED_OBJS),$(OBJ_TARGETS)) \ - ))) \ - $(recurse_targets) \ - $(NULL) -endif - -binaries libs:: $(TARGETS) $(BINARIES_PP) -ifneq (_.,$(recurse_targets)_$(DEPTH)) - @$(if $(or $(recurse_targets),$^),$(call py_action,link_deps,-o binaries --group-all $(if $(want_abspaths),--abspaths )--topsrcdir $(topsrcdir) --topobjdir $(DEPTH) --dist $(DIST) $(ALL_DEP_FILES))) -endif - -endif - -endif # ifdef MOZ_PSEUDO_DERECURSE - -recurse: - @$(RECURSED_COMMAND) - $(LOOP_OVER_PARALLEL_DIRS) - $(LOOP_OVER_DIRS) - $(LOOP_OVER_TOOL_DIRS) diff --git a/js/src/config/rules.mk b/js/src/config/rules.mk deleted file mode 100644 index a9887d9c5eb..00000000000 --- a/js/src/config/rules.mk +++ /dev/null @@ -1,1703 +0,0 @@ -# -*- makefile -*- -# vim:set ts=8 sw=8 sts=8 noet: -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this file, -# You can obtain one at http://mozilla.org/MPL/2.0/. -# - -ifndef topsrcdir -$(error topsrcdir was not set)) -endif - -# Define an include-at-most-once flag -ifdef INCLUDED_RULES_MK -$(error Do not include rules.mk twice!) -endif -INCLUDED_RULES_MK = 1 - -# Make sure that anything that needs to be defined in moz.build wasn't -# overwritten. -_eval_for_side_effects := $(CHECK_MOZBUILD_VARIABLES) - -ifndef MOZILLA_DIR -MOZILLA_DIR = $(topsrcdir) -endif - -ifndef INCLUDED_CONFIG_MK -include $(topsrcdir)/config/config.mk -endif - -ifndef INCLUDED_VERSION_MK -include $(topsrcdir)/config/version.mk -endif - -USE_AUTOTARGETS_MK = 1 -include $(topsrcdir)/config/makefiles/makeutils.mk - -# Only build with Pymake (not GNU make) on Windows. -ifeq ($(HOST_OS_ARCH),WINNT) -ifndef L10NBASEDIR -ifndef .PYMAKE -$(error Pymake is required to build on Windows. Run |./mach build| to \ -automatically use pymake or invoke pymake directly via \ -|python build/pymake/make.py|.) -endif -endif -endif - -ifdef REBUILD_CHECK -ifdef .PYMAKE -REPORT_BUILD = @%rebuild_check rebuild_check $@ $^ -else -REPORT_BUILD = $(info $(shell $(PYTHON) $(MOZILLA_DIR)/config/rebuild_check.py $@ $^)) -endif -else -REPORT_BUILD = $(info $(notdir $@)) -endif - -ifeq ($(OS_ARCH),OS2) -EXEC = -else -EXEC = exec -endif - -# Don't copy xulrunner files at install time, when using system xulrunner -ifdef SYSTEM_LIBXUL - SKIP_COPY_XULRUNNER=1 -endif - -# ELOG prints out failed command when building silently (gmake -s). Pymake -# prints out failed commands anyway, so ELOG just makes things worse by -# forcing shell invocations. -ifndef .PYMAKE -ifneq (,$(findstring s, $(filter-out --%, $(MAKEFLAGS)))) - ELOG := $(EXEC) sh $(BUILD_TOOLS)/print-failed-commands.sh -else - ELOG := -endif # -s -else - ELOG := -endif # ifndef .PYMAKE - -_VPATH_SRCS = $(abspath $<) - -################################################################################ -# Testing frameworks support -################################################################################ - -testxpcobjdir = $(DEPTH)/_tests/xpcshell - -ifdef ENABLE_TESTS - -# Add test directories to the regular directories list. TEST_DIRS should -# arguably have the same status as TOOL_DIRS and other *_DIRS variables. It is -# coded this way until Makefiles stop using the "ifdef ENABLE_TESTS; DIRS +=" -# convention. -# -# The current developer workflow expects tests to be updated when processing -# the default target. If we ever change this implementation, the behavior -# should be preserved or the change should be widely communicated. A -# consequence of not processing test dir targets during the default target is -# that changes to tests may not be updated and code could assume to pass -# locally against non-current test code. -DIRS += $(TEST_DIRS) - -ifndef INCLUDED_TESTS_MOCHITEST_MK #{ - include $(topsrcdir)/config/makefiles/mochitest.mk -endif #} - -ifdef CPP_UNIT_TESTS -ifdef COMPILE_ENVIRONMENT - -# Compile the tests to $(DIST)/bin. Make lots of niceties available by default -# through TestHarness.h, by modifying the list of includes and the libs against -# which stuff links. -CPPSRCS += $(CPP_UNIT_TESTS) -CPP_UNIT_TEST_BINS := $(CPP_UNIT_TESTS:.cpp=$(BIN_SUFFIX)) -SIMPLE_PROGRAMS += $(CPP_UNIT_TEST_BINS) -INCLUDES += -I$(DIST)/include/testing -LIBS += $(XPCOM_GLUE_LDOPTS) $(NSPR_LIBS) - -ifndef MOZ_PROFILE_GENERATE -libs:: $(CPP_UNIT_TEST_BINS) $(call mkdir_deps,$(DIST)/cppunittests) - $(NSINSTALL) $(CPP_UNIT_TEST_BINS) $(DIST)/cppunittests -endif - -cppunittests-remote: DM_TRANS?=adb -cppunittests-remote: - @if [ '${TEST_DEVICE}' != '' -o '$(DM_TRANS)' = 'adb' ]; then \ - $(PYTHON) -u $(topsrcdir)/testing/remotecppunittests.py \ - --xre-path=$(DEPTH)/dist/bin \ - --localLib=$(DEPTH)/dist/$(MOZ_APP_NAME) \ - --dm_trans=$(DM_TRANS) \ - --deviceIP=${TEST_DEVICE} \ - $(subst .cpp,$(BIN_SUFFIX),$(CPP_UNIT_TESTS)) $(EXTRA_TEST_ARGS); \ - else \ - echo 'please prepare your host with environment variables for TEST_DEVICE'; \ - fi - -endif # COMPILE_ENVIRONMENT -endif # CPP_UNIT_TESTS - -.PHONY: check - -ifdef PYTHON_UNIT_TESTS - -RUN_PYTHON_UNIT_TESTS := $(addsuffix -run,$(PYTHON_UNIT_TESTS)) - -.PHONY: $(RUN_PYTHON_UNIT_TESTS) - -check:: $(RUN_PYTHON_UNIT_TESTS) - -$(RUN_PYTHON_UNIT_TESTS): %-run: % - @PYTHONDONTWRITEBYTECODE=1 $(PYTHON) $< - -endif # PYTHON_UNIT_TESTS - -endif # ENABLE_TESTS - - -# -# Library rules -# -# If FORCE_STATIC_LIB is set, build a static library. -# Otherwise, build a shared library. -# - -ifndef LIBRARY -ifdef STATIC_LIBRARY_NAME -REAL_LIBRARY := $(LIB_PREFIX)$(STATIC_LIBRARY_NAME).$(LIB_SUFFIX) -# Only build actual library if it is installed in DIST/lib or SDK -ifeq (,$(SDK_LIBRARY)$(DIST_INSTALL)$(NO_EXPAND_LIBS)) -LIBRARY := $(REAL_LIBRARY).$(LIBS_DESC_SUFFIX) -else -LIBRARY := $(REAL_LIBRARY) $(REAL_LIBRARY).$(LIBS_DESC_SUFFIX) -endif -endif # STATIC_LIBRARY_NAME -endif # LIBRARY - -ifndef HOST_LIBRARY -ifdef HOST_LIBRARY_NAME -HOST_LIBRARY := $(LIB_PREFIX)$(HOST_LIBRARY_NAME).$(LIB_SUFFIX) -endif -endif - -ifdef LIBRARY -ifdef FORCE_SHARED_LIB -ifdef MKSHLIB - -ifdef LIB_IS_C_ONLY -MKSHLIB = $(MKCSHLIB) -endif - -ifneq (,$(filter OS2 WINNT,$(OS_ARCH))) -IMPORT_LIBRARY := $(LIB_PREFIX)$(SHARED_LIBRARY_NAME).$(IMPORT_LIB_SUFFIX) -endif - -ifdef MAKE_FRAMEWORK -SHARED_LIBRARY := $(SHARED_LIBRARY_NAME) -else -SHARED_LIBRARY := $(DLL_PREFIX)$(SHARED_LIBRARY_NAME)$(DLL_SUFFIX) -endif - -ifeq ($(OS_ARCH),OS2) -DEF_FILE := $(SHARED_LIBRARY:.dll=.def) -endif - -EMBED_MANIFEST_AT=2 - -endif # MKSHLIB -endif # FORCE_SHARED_LIB -endif # LIBRARY - -ifdef FORCE_STATIC_LIB -ifndef FORCE_SHARED_LIB -SHARED_LIBRARY := $(NULL) -DEF_FILE := $(NULL) -IMPORT_LIBRARY := $(NULL) -endif -endif - -ifdef FORCE_SHARED_LIB -ifndef FORCE_STATIC_LIB -LIBRARY := $(NULL) -endif -endif - -ifeq ($(OS_ARCH),WINNT) -ifndef GNU_CC - -# -# Unless we're building SIMPLE_PROGRAMS, all C++ files share a PDB file per -# directory. For parallel builds, this PDB file is shared and locked by -# MSPDBSRV.EXE, starting with MSVC8 SP1. If you're using MSVC 7.1 or MSVC8 -# without SP1, don't do parallel builds. -# -# The final PDB for libraries and programs is created by the linker and uses -# a different name from the single PDB file created by the compiler. See -# bug 462740. -# - -ifdef SIMPLE_PROGRAMS -COMPILE_PDBFILE = $(basename $(@F)).pdb -else -COMPILE_PDBFILE = generated.pdb -endif - -LINK_PDBFILE = $(basename $(@F)).pdb -ifdef MOZ_DEBUG -CODFILE=$(basename $(@F)).cod -endif - -ifdef DEFFILE -OS_LDFLAGS += -DEF:$(call normalizepath,$(DEFFILE)) -EXTRA_DEPS += $(DEFFILE) -endif - -else #!GNU_CC - -ifdef DEFFILE -OS_LDFLAGS += $(call normalizepath,$(DEFFILE)) -EXTRA_DEPS += $(DEFFILE) -endif - -endif # !GNU_CC - -endif # WINNT - -ifeq ($(SOLARIS_SUNPRO_CXX),1) -ifeq (86,$(findstring 86,$(OS_TEST))) -OS_LDFLAGS += -M $(topsrcdir)/config/solaris_ia32.map -endif # x86 -endif # Solaris Sun Studio C++ - -ifeq ($(HOST_OS_ARCH),WINNT) -HOST_PDBFILE=$(basename $(@F)).pdb -endif - -# Don't build SIMPLE_PROGRAMS during the MOZ_PROFILE_GENERATE pass -ifdef MOZ_PROFILE_GENERATE -EXCLUDED_OBJS := $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.$(OBJ_SUFFIX)) -SIMPLE_PROGRAMS := -endif - -ifdef COMPILE_ENVIRONMENT -ifndef TARGETS -TARGETS = $(LIBRARY) $(SHARED_LIBRARY) $(PROGRAM) $(SIMPLE_PROGRAMS) $(HOST_LIBRARY) $(HOST_PROGRAM) $(HOST_SIMPLE_PROGRAMS) -endif - -COBJS = $(notdir $(CSRCS:.c=.$(OBJ_SUFFIX))) -SOBJS = $(notdir $(SSRCS:.S=.$(OBJ_SUFFIX))) -# CPPSRCS can have different extensions (eg: .cpp, .cc) -CPPOBJS = $(notdir $(addsuffix .$(OBJ_SUFFIX),$(basename $(CPPSRCS)))) -CMOBJS = $(notdir $(CMSRCS:.m=.$(OBJ_SUFFIX))) -CMMOBJS = $(notdir $(CMMSRCS:.mm=.$(OBJ_SUFFIX))) -ASOBJS = $(notdir $(ASFILES:.$(ASM_SUFFIX)=.$(OBJ_SUFFIX))) -ifndef OBJS -_OBJS = $(COBJS) $(SOBJS) $(CPPOBJS) $(CMOBJS) $(CMMOBJS) $(ASOBJS) -OBJS = $(strip $(_OBJS)) -endif - -HOST_COBJS = $(addprefix host_,$(notdir $(HOST_CSRCS:.c=.$(OBJ_SUFFIX)))) -# HOST_CPPOBJS can have different extensions (eg: .cpp, .cc) -HOST_CPPOBJS = $(addprefix host_,$(notdir $(addsuffix .$(OBJ_SUFFIX),$(basename $(HOST_CPPSRCS))))) -HOST_CMOBJS = $(addprefix host_,$(notdir $(HOST_CMSRCS:.m=.$(OBJ_SUFFIX)))) -HOST_CMMOBJS = $(addprefix host_,$(notdir $(HOST_CMMSRCS:.mm=.$(OBJ_SUFFIX)))) -ifndef HOST_OBJS -_HOST_OBJS = $(HOST_COBJS) $(HOST_CPPOBJS) $(HOST_CMOBJS) $(HOST_CMMOBJS) -HOST_OBJS = $(strip $(_HOST_OBJS)) -endif -else -LIBRARY := -SHARED_LIBRARY := -IMPORT_LIBRARY := -REAL_LIBRARY := -PROGRAM := -SIMPLE_PROGRAMS := -HOST_LIBRARY := -HOST_PROGRAM := -HOST_SIMPLE_PROGRAMS := -SDK_BINARY := $(filter %.py,$(SDK_BINARY)) -SDK_LIBRARY := -endif - -ALL_TRASH = \ - $(GARBAGE) $(TARGETS) $(OBJS) $(PROGOBJS) LOGS TAGS a.out \ - $(filter-out $(ASFILES),$(OBJS:.$(OBJ_SUFFIX)=.s)) $(OBJS:.$(OBJ_SUFFIX)=.ii) \ - $(OBJS:.$(OBJ_SUFFIX)=.i) $(OBJS:.$(OBJ_SUFFIX)=.i_o) \ - $(HOST_PROGOBJS) $(HOST_OBJS) $(IMPORT_LIBRARY) $(DEF_FILE)\ - $(EXE_DEF_FILE) so_locations _gen _stubs $(wildcard *.res) $(wildcard *.RES) \ - $(wildcard *.pdb) $(CODFILE) $(IMPORT_LIBRARY) \ - $(SHARED_LIBRARY:$(DLL_SUFFIX)=.exp) $(wildcard *.ilk) \ - $(PROGRAM:$(BIN_SUFFIX)=.exp) $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.exp) \ - $(PROGRAM:$(BIN_SUFFIX)=.lib) $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.lib) \ - $(SIMPLE_PROGRAMS:$(BIN_SUFFIX)=.$(OBJ_SUFFIX)) \ - $(wildcard gts_tmp_*) $(LIBRARY:%.a=.%.timestamp) -ALL_TRASH_DIRS = \ - $(GARBAGE_DIRS) /no-such-file - -ifdef QTDIR -GARBAGE += $(MOCSRCS) -endif - -ifdef SIMPLE_PROGRAMS -GARBAGE += $(SIMPLE_PROGRAMS:%=%.$(OBJ_SUFFIX)) -endif - -ifdef HOST_SIMPLE_PROGRAMS -GARBAGE += $(HOST_SIMPLE_PROGRAMS:%=%.$(OBJ_SUFFIX)) -endif - -# -# the Solaris WorkShop template repository cache. it occasionally can get -# out of sync, so targets like clobber should kill it. -# -ifeq ($(SOLARIS_SUNPRO_CXX),1) -GARBAGE_DIRS += SunWS_cache -endif - -ifdef MOZ_UPDATE_XTERM -# Its good not to have a newline at the end of the titlebar string because it -# makes the make -s output easier to read. Echo -n does not work on all -# platforms, but we can trick printf into doing it. -UPDATE_TITLE = printf '\033]0;%s in %s\007' $(1) $(relativesrcdir)/$(2) ; -endif - -ifdef MACH -ifndef NO_BUILDSTATUS_MESSAGES -define BUILDSTATUS -@echo 'BUILDSTATUS $1' - -endef -endif -endif - -define SUBMAKE # $(call SUBMAKE,target,directory,static) -+@$(UPDATE_TITLE) -+$(MAKE) $(if $(2),-C $(2)) $(1) - -endef # The extra line is important here! don't delete it - -define TIER_DIR_SUBMAKE -$(call BUILDSTATUS,TIERDIR_START $(1) $(2) $(3)) -$(call SUBMAKE,$(4),$(3),$(5)) -$(call BUILDSTATUS,TIERDIR_FINISH $(1) $(2) $(3)) - -endef # Ths empty line is important. - -ifneq (,$(strip $(DIRS))) -LOOP_OVER_DIRS = \ - $(foreach dir,$(DIRS),$(call SUBMAKE,$@,$(dir))) -endif - -# we only use this for the makefiles target and other stuff that doesn't matter -ifneq (,$(strip $(PARALLEL_DIRS))) -LOOP_OVER_PARALLEL_DIRS = \ - $(foreach dir,$(PARALLEL_DIRS),$(call SUBMAKE,$@,$(dir))) -endif - -ifneq (,$(strip $(TOOL_DIRS))) -LOOP_OVER_TOOL_DIRS = \ - $(foreach dir,$(TOOL_DIRS),$(call SUBMAKE,$@,$(dir))) -endif - -# -# Now we can differentiate between objects used to build a library, and -# objects used to build an executable in the same directory. -# -ifndef PROGOBJS -PROGOBJS = $(OBJS) -endif - -ifndef HOST_PROGOBJS -HOST_PROGOBJS = $(HOST_OBJS) -endif - -GARBAGE_DIRS += $(wildcard $(CURDIR)/$(MDDEPDIR)) - -# -# Tags: emacs (etags), vi (ctags) -# TAG_PROGRAM := ctags -L - -# -TAG_PROGRAM = xargs etags -a - -# -# Turn on C++ linking if we have any .cpp or .mm files -# (moved this from config.mk so that config.mk can be included -# before the CPPSRCS are defined) -# -ifneq ($(HOST_CPPSRCS)$(HOST_CMMSRCS),) -HOST_CPP_PROG_LINK = 1 -endif - -# -# This will strip out symbols that the component should not be -# exporting from the .dynsym section. -# -ifdef IS_COMPONENT -EXTRA_DSO_LDOPTS += $(MOZ_COMPONENTS_VERSION_SCRIPT_LDFLAGS) -endif # IS_COMPONENT - -# -# MacOS X specific stuff -# - -ifeq ($(OS_ARCH),Darwin) -ifdef SHARED_LIBRARY -ifdef IS_COMPONENT -EXTRA_DSO_LDOPTS += -bundle -else -EXTRA_DSO_LDOPTS += -dynamiclib -install_name @executable_path/$(SHARED_LIBRARY) -compatibility_version 1 -current_version 1 -single_module -endif -endif -endif - -# -# On NetBSD a.out systems, use -Bsymbolic. This fixes what would otherwise be -# fatal symbol name clashes between components. -# -ifeq ($(OS_ARCH),NetBSD) -ifeq ($(DLL_SUFFIX),.so.1.0) -ifdef IS_COMPONENT -EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic -endif -endif -endif - -ifeq ($(OS_ARCH),FreeBSD) -ifdef IS_COMPONENT -EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic -endif -endif - -ifeq ($(OS_ARCH),NetBSD) -ifneq (,$(filter arc cobalt hpcmips mipsco newsmips pmax sgimips,$(OS_TEST))) -ifneq (,$(filter layout/%,$(relativesrcdir))) -OS_CFLAGS += -Wa,-xgot -OS_CXXFLAGS += -Wa,-xgot -endif -endif -endif - -# -# HP-UXBeOS specific section: for COMPONENTS only, add -Bsymbolic flag -# which uses internal symbols first -# -ifeq ($(OS_ARCH),HP-UX) -ifdef IS_COMPONENT -ifeq ($(GNU_CC)$(GNU_CXX),) -EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic -ifneq ($(HAS_EXTRAEXPORTS),1) -MKSHLIB += -Wl,+eNSGetModule -Wl,+eerrno -MKCSHLIB += +eNSGetModule +eerrno -ifneq ($(OS_TEST),ia64) -MKSHLIB += -Wl,+e_shlInit -MKCSHLIB += +e_shlInit -endif # !ia64 -endif # !HAS_EXTRAEXPORTS -endif # non-gnu compilers -endif # IS_COMPONENT -endif # HP-UX - -ifeq ($(OS_ARCH),AIX) -ifdef IS_COMPONENT -ifneq ($(HAS_EXTRAEXPORTS),1) -MKSHLIB += -bE:$(MOZILLA_DIR)/build/unix/aix.exp -bnoexpall -MKCSHLIB += -bE:$(MOZILLA_DIR)/build/unix/aix.exp -bnoexpall -endif # HAS_EXTRAEXPORTS -endif # IS_COMPONENT -endif # AIX - -# -# Linux: add -Bsymbolic flag for components -# -ifeq ($(OS_ARCH),Linux) -ifdef IS_COMPONENT -EXTRA_DSO_LDOPTS += -Wl,-Bsymbolic -endif -endif - -# -# GNU doesn't have path length limitation -# - -ifeq ($(OS_ARCH),GNU) -OS_CPPFLAGS += -DPATH_MAX=1024 -DMAXPATHLEN=1024 -endif - -# -# MINGW32 -# -ifeq ($(OS_ARCH),WINNT) -ifdef GNU_CC -ifndef IS_COMPONENT -DSO_LDOPTS += -Wl,--out-implib -Wl,$(IMPORT_LIBRARY) -endif -endif -endif - -ifeq ($(USE_TVFS),1) -IFLAGS1 = -rb -IFLAGS2 = -rb -else -IFLAGS1 = -m 644 -IFLAGS2 = -m 755 -endif - -ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) -OUTOPTION = -Fo# eol -PREPROCESS_OPTION = -P -Fi# eol -else -OUTOPTION = -o # eol -PREPROCESS_OPTION = -E -o #eol -endif # WINNT && !GNU_CC - -ifneq (,$(filter ml%,$(AS))) -ASOUTOPTION = -Fo# eol -else -ASOUTOPTION = -o # eol -endif - -ifeq (,$(CROSS_COMPILE)) -HOST_OUTOPTION = $(OUTOPTION) -else -HOST_OUTOPTION = -o # eol -endif -################################################################################ - -# Ensure the build config is up to date. This is done automatically when builds -# are performed through |mach build|. The check here is to catch people not -# using mach. If we ever enforce builds through mach, this code can be removed. -ifndef MOZBUILD_BACKEND_CHECKED -ifndef MACH -ifndef TOPLEVEL_BUILD -$(DEPTH)/backend.RecursiveMakeBackend: - $(error Build configuration changed. Build with |mach build| or run |mach build-backend| to regenerate build config) - -include $(DEPTH)/backend.RecursiveMakeBackend.pp - -default:: $(DEPTH)/backend.RecursiveMakeBackend - -export MOZBUILD_BACKEND_CHECKED=1 -endif -endif -endif - -# The root makefile doesn't want to do a plain export/libs, because -# of the tiers and because of libxul. Suppress the default rules in favor -# of something else. Makefiles which use this var *must* provide a sensible -# default rule before including rules.mk -ifndef SUPPRESS_DEFAULT_RULES -default all:: - $(MAKE) export -ifdef MOZ_PSEUDO_DERECURSE -ifdef COMPILE_ENVIRONMENT - $(MAKE) compile -endif -endif - $(MAKE) libs - $(MAKE) tools -endif # SUPPRESS_DEFAULT_RULES - -ifeq ($(findstring s,$(filter-out --%, $(MAKEFLAGS))),) -ECHO := echo -QUIET := -else -ECHO := true -QUIET := -q -endif - -# Do everything from scratch -everything:: - $(MAKE) clean - $(MAKE) all - -ifneq (,$(filter-out %.$(LIB_SUFFIX),$(SHARED_LIBRARY_LIBS))) -$(error SHARED_LIBRARY_LIBS must contain .$(LIB_SUFFIX) files only) -endif - -HOST_LIBS_DEPS = $(filter %.$(LIB_SUFFIX),$(HOST_LIBS)) - -# Dependencies which, if modified, should cause everything to rebuild -GLOBAL_DEPS += Makefile $(DEPTH)/config/autoconf.mk $(topsrcdir)/config/config.mk - -############################################## -ifdef COMPILE_ENVIRONMENT -OBJ_TARGETS = $(OBJS) $(PROGOBJS) $(HOST_OBJS) $(HOST_PROGOBJS) - -compile:: $(OBJ_TARGETS) - -include $(topsrcdir)/config/makefiles/target_binaries.mk -endif - -ifdef IS_TOOL_DIR -# One would think "tools:: libs" would work, but it turns out that combined with -# bug 907365, this makes make forget to run some rules sometimes. -tools:: - @$(MAKE) libs -endif - -############################################## -ifneq (1,$(NO_PROFILE_GUIDED_OPTIMIZE)) -ifdef MOZ_PROFILE_USE -ifeq ($(OS_ARCH)_$(GNU_CC), WINNT_) -# When building with PGO, we have to make sure to re-link -# in the MOZ_PROFILE_USE phase if we linked in the -# MOZ_PROFILE_GENERATE phase. We'll touch this pgo.relink -# file in the link rule in the GENERATE phase to indicate -# that we need a relink. -ifdef SHARED_LIBRARY -$(SHARED_LIBRARY): pgo.relink -endif -ifdef PROGRAM -$(PROGRAM): pgo.relink -endif - -# In the second pass, we need to merge the pgc files into the pgd file. -# The compiler would do this for us automatically if they were in the right -# place, but they're in dist/bin. -ifneq (,$(SHARED_LIBRARY)$(PROGRAM)) -export:: -ifdef PROGRAM - $(PYTHON) $(topsrcdir)/build/win32/pgomerge.py \ - $(PROGRAM:$(BIN_SUFFIX)=) $(DIST)/bin -endif -ifdef SHARED_LIBRARY - $(PYTHON) $(topsrcdir)/build/win32/pgomerge.py \ - $(SHARED_LIBRARY_NAME) $(DIST)/bin -endif -endif # SHARED_LIBRARY || PROGRAM -endif # WINNT_ -endif # MOZ_PROFILE_USE -ifdef MOZ_PROFILE_GENERATE -# Clean up profiling data during PROFILE_GENERATE phase -export:: -ifeq ($(OS_ARCH)_$(GNU_CC), WINNT_) - $(foreach pgd,$(wildcard *.pgd),pgomgr -clear $(pgd);) -else -ifdef GNU_CC - -$(RM) *.gcda -endif -endif -endif - -ifneq (,$(MOZ_PROFILE_GENERATE)$(MOZ_PROFILE_USE)) -ifdef GNU_CC -# Force rebuilding libraries and programs in both passes because each -# pass uses different object files. -$(PROGRAM) $(SHARED_LIBRARY) $(LIBRARY): FORCE -endif -endif - -endif # NO_PROFILE_GUIDED_OPTIMIZE - -############################################## - -checkout: - $(MAKE) -C $(topsrcdir) -f client.mk checkout - -clean clobber realclean clobber_all:: - -$(RM) $(ALL_TRASH) - -$(RM) -r $(ALL_TRASH_DIRS) - -ifdef TIERS -clean clobber realclean clobber_all distclean:: - $(foreach dir, \ - $(foreach tier, $(TIERS), $(tier_$(tier)_staticdirs) $(tier_$(tier)_dirs)), \ - -$(call SUBMAKE,$@,$(dir))) -else -clean clobber realclean clobber_all distclean:: - $(foreach dir,$(PARALLEL_DIRS) $(DIRS) $(TOOL_DIRS),-$(call SUBMAKE,$@,$(dir))) - -distclean:: - $(foreach dir,$(PARALLEL_DIRS) $(DIRS) $(TOOL_DIRS),-$(call SUBMAKE,$@,$(dir))) -endif - -distclean:: - -$(RM) -r $(ALL_TRASH_DIRS) - -$(RM) $(ALL_TRASH) \ - Makefile .HSancillary \ - $(wildcard *.$(OBJ_SUFFIX)) $(wildcard *.ho) $(wildcard host_*.o*) \ - $(wildcard *.$(LIB_SUFFIX)) $(wildcard *$(DLL_SUFFIX)) \ - $(wildcard *.$(IMPORT_LIB_SUFFIX)) -ifeq ($(OS_ARCH),OS2) - -$(RM) $(PROGRAM:.exe=.map) -endif - -alltags: - $(RM) TAGS - find $(topsrcdir) -name dist -prune -o \( -name '*.[hc]' -o -name '*.cp' -o -name '*.cpp' -o -name '*.idl' \) -print | $(TAG_PROGRAM) - -# -# PROGRAM = Foo -# creates OBJS, links with LIBS to create Foo -# -$(PROGRAM): $(PROGOBJS) $(EXTRA_DEPS) $(EXE_DEF_FILE) $(RESFILE) $(GLOBAL_DEPS) - $(REPORT_BUILD) - @$(RM) $@.manifest -ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) - $(EXPAND_LD) -NOLOGO -OUT:$@ -PDB:$(LINK_PDBFILE) $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(MOZ_GLUE_PROGRAM_LDFLAGS) $(PROGOBJS) $(RESFILE) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS) -ifdef MSMANIFEST_TOOL - @if test -f $@.manifest; then \ - if test -f '$(srcdir)/$@.manifest'; then \ - echo 'Embedding manifest from $(srcdir)/$@.manifest and $@.manifest'; \ - mt.exe -NOLOGO -MANIFEST '$(win_srcdir)/$@.manifest' $@.manifest -OUTPUTRESOURCE:$@\;1; \ - else \ - echo 'Embedding manifest from $@.manifest'; \ - mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \ - fi; \ - elif test -f '$(srcdir)/$@.manifest'; then \ - echo 'Embedding manifest from $(srcdir)/$@.manifest'; \ - mt.exe -NOLOGO -MANIFEST '$(win_srcdir)/$@.manifest' -OUTPUTRESOURCE:$@\;1; \ - fi -endif # MSVC with manifest tool -ifdef MOZ_PROFILE_GENERATE -# touch it a few seconds into the future to work around FAT's -# 2-second granularity - touch -t `date +%Y%m%d%H%M.%S -d 'now+5seconds'` pgo.relink -endif -else # !WINNT || GNU_CC - $(EXPAND_CCC) -o $@ $(CXXFLAGS) $(PROGOBJS) $(RESFILE) $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(WRAP_LDFLAGS) $(LIBS_DIR) $(LIBS) $(MOZ_GLUE_PROGRAM_LDFLAGS) $(OS_LIBS) $(EXTRA_LIBS) $(BIN_FLAGS) $(EXE_DEF_FILE) $(STLPORT_LIBS) - @$(call CHECK_STDCXX,$@) -endif # WINNT && !GNU_CC - -ifdef ENABLE_STRIP - $(STRIP) $(STRIP_FLAGS) $@ -endif -ifdef MOZ_POST_PROGRAM_COMMAND - $(MOZ_POST_PROGRAM_COMMAND) $@ -endif - -$(HOST_PROGRAM): $(HOST_PROGOBJS) $(HOST_LIBS_DEPS) $(HOST_EXTRA_DEPS) $(GLOBAL_DEPS) - $(REPORT_BUILD) -ifeq (_WINNT,$(GNU_CC)_$(HOST_OS_ARCH)) - $(EXPAND_LIBS_EXEC) -- $(HOST_LD) -NOLOGO -OUT:$@ -PDB:$(HOST_PDBFILE) $(HOST_OBJS) $(WIN32_EXE_LDFLAGS) $(HOST_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) -ifdef MSMANIFEST_TOOL - @if test -f $@.manifest; then \ - if test -f '$(srcdir)/$@.manifest'; then \ - echo 'Embedding manifest from $(srcdir)/$@.manifest and $@.manifest'; \ - mt.exe -NOLOGO -MANIFEST '$(win_srcdir)/$@.manifest' $@.manifest -OUTPUTRESOURCE:$@\;1; \ - else \ - echo 'Embedding manifest from $@.manifest'; \ - mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \ - fi; \ - elif test -f '$(srcdir)/$@.manifest'; then \ - echo 'Embedding manifest from $(srcdir)/$@.manifest'; \ - mt.exe -NOLOGO -MANIFEST '$(win_srcdir)/$@.manifest' -OUTPUTRESOURCE:$@\;1; \ - fi -endif # MSVC with manifest tool -else -ifeq ($(HOST_CPP_PROG_LINK),1) - $(EXPAND_LIBS_EXEC) -- $(HOST_CXX) -o $@ $(HOST_CXXFLAGS) $(HOST_LDFLAGS) $(HOST_PROGOBJS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) -else - $(EXPAND_LIBS_EXEC) -- $(HOST_CC) -o $@ $(HOST_CFLAGS) $(HOST_LDFLAGS) $(HOST_PROGOBJS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) -endif # HOST_CPP_PROG_LINK -endif - -# -# This is an attempt to support generation of multiple binaries -# in one directory, it assumes everything to compile Foo is in -# Foo.o (from either Foo.c or Foo.cpp). -# -# SIMPLE_PROGRAMS = Foo Bar -# creates Foo.o Bar.o, links with LIBS to create Foo, Bar. -# -$(SIMPLE_PROGRAMS): %$(BIN_SUFFIX): %.$(OBJ_SUFFIX) $(EXTRA_DEPS) $(GLOBAL_DEPS) - $(REPORT_BUILD) -ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) - $(EXPAND_LD) -nologo -out:$@ -pdb:$(LINK_PDBFILE) $< $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(MOZ_GLUE_PROGRAM_LDFLAGS) $(LIBS) $(EXTRA_LIBS) $(OS_LIBS) -ifdef MSMANIFEST_TOOL - @if test -f $@.manifest; then \ - mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \ - rm -f $@.manifest; \ - fi -endif # MSVC with manifest tool -else - $(EXPAND_CCC) $(CXXFLAGS) -o $@ $< $(WIN32_EXE_LDFLAGS) $(LDFLAGS) $(WRAP_LDFLAGS) $(LIBS_DIR) $(LIBS) $(MOZ_GLUE_PROGRAM_LDFLAGS) $(OS_LIBS) $(EXTRA_LIBS) $(BIN_FLAGS) $(STLPORT_LIBS) - @$(call CHECK_STDCXX,$@) -endif # WINNT && !GNU_CC - -ifdef ENABLE_STRIP - $(STRIP) $(STRIP_FLAGS) $@ -endif -ifdef MOZ_POST_PROGRAM_COMMAND - $(MOZ_POST_PROGRAM_COMMAND) $@ -endif - -$(HOST_SIMPLE_PROGRAMS): host_%$(HOST_BIN_SUFFIX): host_%.$(OBJ_SUFFIX) $(HOST_LIBS_DEPS) $(HOST_EXTRA_DEPS) $(GLOBAL_DEPS) - $(REPORT_BUILD) -ifeq (WINNT_,$(HOST_OS_ARCH)_$(GNU_CC)) - $(EXPAND_LIBS_EXEC) -- $(HOST_LD) -NOLOGO -OUT:$@ -PDB:$(HOST_PDBFILE) $< $(WIN32_EXE_LDFLAGS) $(HOST_LIBS) $(HOST_EXTRA_LIBS) -else -ifneq (,$(HOST_CPPSRCS)$(USE_HOST_CXX)) - $(EXPAND_LIBS_EXEC) -- $(HOST_CXX) $(HOST_OUTOPTION)$@ $(HOST_CXXFLAGS) $(INCLUDES) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS) -else - $(EXPAND_LIBS_EXEC) -- $(HOST_CC) $(HOST_OUTOPTION)$@ $(HOST_CFLAGS) $(INCLUDES) $< $(HOST_LIBS) $(HOST_EXTRA_LIBS) -endif -endif - -ifdef DTRACE_PROBE_OBJ -EXTRA_DEPS += $(DTRACE_PROBE_OBJ) -OBJS += $(DTRACE_PROBE_OBJ) -endif - -$(filter %.$(LIB_SUFFIX),$(LIBRARY)): $(OBJS) $(EXTRA_DEPS) $(GLOBAL_DEPS) - $(REPORT_BUILD) - $(RM) $(LIBRARY) - $(EXPAND_AR) $(AR_FLAGS) $(OBJS) $(SHARED_LIBRARY_LIBS) - -$(filter-out %.$(LIB_SUFFIX),$(LIBRARY)): $(filter %.$(LIB_SUFFIX),$(LIBRARY)) $(OBJS) $(EXTRA_DEPS) $(GLOBAL_DEPS) -# When we only build a library descriptor, blow out any existing library - $(REPORT_BUILD) - $(if $(filter %.$(LIB_SUFFIX),$(LIBRARY)),,$(RM) $(REAL_LIBRARY) $(EXPORT_LIBRARY:%=%/$(REAL_LIBRARY))) - $(EXPAND_LIBS_GEN) -o $@ $(OBJS) $(SHARED_LIBRARY_LIBS) - -ifeq ($(OS_ARCH),WINNT) -# Import libraries are created by the rules creating shared libraries. -# The rules to copy them to $(DIST)/lib depend on $(IMPORT_LIBRARY), -# but make will happily consider the import library before it is refreshed -# when rebuilding the corresponding shared library. Defining an empty recipe -# for import libraries forces make to wait for the shared library recipe to -# have run before considering other targets that depend on the import library. -# See bug 795204. -$(IMPORT_LIBRARY): $(SHARED_LIBRARY) ; -endif - -ifeq ($(OS_ARCH),OS2) -$(DEF_FILE): $(OBJS) $(SHARED_LIBRARY_LIBS) - $(RM) $@ - echo LIBRARY $(SHARED_LIBRARY_NAME) INITINSTANCE TERMINSTANCE > $@ - echo PROTMODE >> $@ - echo CODE LOADONCALL MOVEABLE DISCARDABLE >> $@ - echo DATA PRELOAD MOVEABLE MULTIPLE NONSHARED >> $@ - echo EXPORTS >> $@ - - $(ADD_TO_DEF_FILE) - -$(IMPORT_LIBRARY): $(SHARED_LIBRARY) - $(REPORT_BUILD) - $(RM) $@ - $(IMPLIB) $@ $^ -endif # OS/2 - -$(HOST_LIBRARY): $(HOST_OBJS) Makefile - $(REPORT_BUILD) - $(RM) $@ - $(EXPAND_LIBS_EXEC) --extract -- $(HOST_AR) $(HOST_AR_FLAGS) $(HOST_OBJS) - -ifdef HAVE_DTRACE -ifndef XP_MACOSX -ifdef DTRACE_PROBE_OBJ -ifndef DTRACE_LIB_DEPENDENT -NON_DTRACE_OBJS := $(filter-out $(DTRACE_PROBE_OBJ),$(OBJS)) -$(DTRACE_PROBE_OBJ): $(NON_DTRACE_OBJS) - dtrace -G -C -s $(MOZILLA_DTRACE_SRC) -o $(DTRACE_PROBE_OBJ) $(NON_DTRACE_OBJS) -endif -endif -endif -endif - -# On Darwin (Mac OS X), dwarf2 debugging uses debug info left in .o files, -# so instead of deleting .o files after repacking them into a dylib, we make -# symlinks back to the originals. The symlinks are a no-op for stabs debugging, -# so no need to conditionalize on OS version or debugging format. - -$(SHARED_LIBRARY): $(OBJS) $(DEF_FILE) $(RESFILE) $(LIBRARY) $(EXTRA_DEPS) $(GLOBAL_DEPS) - $(REPORT_BUILD) -ifndef INCREMENTAL_LINKER - $(RM) $@ -endif -ifdef DTRACE_LIB_DEPENDENT -ifndef XP_MACOSX - dtrace -G -C -s $(MOZILLA_DTRACE_SRC) -o $(DTRACE_PROBE_OBJ) $(shell $(EXPAND_LIBS) $(MOZILLA_PROBE_LIBS)) -endif - $(EXPAND_MKSHLIB) $(SHLIB_LDSTARTFILE) $(OBJS) $(SUB_SHLOBJS) $(DTRACE_PROBE_OBJ) $(MOZILLA_PROBE_LIBS) $(RESFILE) $(LDFLAGS) $(WRAP_LDFLAGS) $(SHARED_LIBRARY_LIBS) $(EXTRA_DSO_LDOPTS) $(MOZ_GLUE_LDFLAGS) $(OS_LIBS) $(EXTRA_LIBS) $(DEF_FILE) $(SHLIB_LDENDFILE) $(if $(LIB_IS_C_ONLY),,$(STLPORT_LIBS)) - @$(RM) $(DTRACE_PROBE_OBJ) -else # ! DTRACE_LIB_DEPENDENT - $(EXPAND_MKSHLIB) $(SHLIB_LDSTARTFILE) $(OBJS) $(SUB_SHLOBJS) $(RESFILE) $(LDFLAGS) $(WRAP_LDFLAGS) $(SHARED_LIBRARY_LIBS) $(EXTRA_DSO_LDOPTS) $(MOZ_GLUE_LDFLAGS) $(OS_LIBS) $(EXTRA_LIBS) $(DEF_FILE) $(SHLIB_LDENDFILE) $(if $(LIB_IS_C_ONLY),,$(STLPORT_LIBS)) -endif # DTRACE_LIB_DEPENDENT - @$(call CHECK_STDCXX,$@) - -ifeq (_WINNT,$(GNU_CC)_$(OS_ARCH)) -ifdef MSMANIFEST_TOOL -ifdef EMBED_MANIFEST_AT - @if test -f $@.manifest; then \ - mt.exe -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;$(EMBED_MANIFEST_AT); \ - rm -f $@.manifest; \ - fi -endif # EMBED_MANIFEST_AT -endif # MSVC with manifest tool -ifdef MOZ_PROFILE_GENERATE - touch -t `date +%Y%m%d%H%M.%S -d 'now+5seconds'` pgo.relink -endif -endif # WINNT && !GCC - @$(RM) foodummyfilefoo $(DELETE_AFTER_LINK) - chmod +x $@ -ifdef ENABLE_STRIP - $(STRIP) $(STRIP_FLAGS) $@ -endif -ifdef MOZ_POST_DSO_LIB_COMMAND - $(MOZ_POST_DSO_LIB_COMMAND) $@ -endif - -ifeq ($(SOLARIS_SUNPRO_CC),1) -_MDDEPFILE = $(MDDEPDIR)/$(@F).pp - -define MAKE_DEPS_AUTO_CC -if test -d $(@D); then \ - echo 'Building deps for $< using Sun Studio cc'; \ - $(CC) $(COMPILE_CFLAGS) -xM $< >$(_MDDEPFILE) ; \ - $(PYTHON) $(topsrcdir)/build/unix/add_phony_targets.py $(_MDDEPFILE) ; \ -fi -endef -define MAKE_DEPS_AUTO_CXX -if test -d $(@D); then \ - echo 'Building deps for $< using Sun Studio CC'; \ - $(CXX) $(COMPILE_CXXFLAGS) -xM $< >$(_MDDEPFILE) ; \ - $(PYTHON) $(topsrcdir)/build/unix/add_phony_targets.py $(_MDDEPFILE) ; \ -fi -endef -endif # Sun Studio on Solaris - -# The object file is in the current directory, and the source file can be any -# relative path. This macro adds the dependency obj: src for each source file. -# This dependency must be first for the $< flag to work correctly, and the -# rules that have commands for these targets must not list any other -# prerequisites, or they will override the $< variable. -define src_objdep -$(basename $2$(notdir $1)).$(OBJ_SUFFIX): $1 $$(call mkdir_deps,$$(MDDEPDIR)) -endef -$(foreach f,$(CSRCS) $(SSRCS) $(CPPSRCS) $(CMSRCS) $(CMMSRCS) $(ASFILES),$(eval $(call src_objdep,$(f)))) -$(foreach f,$(HOST_CSRCS) $(HOST_CPPSRCS) $(HOST_CMSRCS) $(HOST_CMMSRCS),$(eval $(call src_objdep,$(f),host_))) - -$(OBJS) $(HOST_OBJS) $(PROGOBJS) $(HOST_PROGOBJS): $(GLOBAL_DEPS) - -# Rules for building native targets must come first because of the host_ prefix -$(HOST_COBJS): - $(REPORT_BUILD) - $(ELOG) $(HOST_CC) $(HOST_OUTOPTION)$@ -c $(HOST_CFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) - -$(HOST_CPPOBJS): - $(REPORT_BUILD) - $(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) - -$(HOST_CMOBJS): - $(REPORT_BUILD) - $(ELOG) $(HOST_CC) $(HOST_OUTOPTION)$@ -c $(HOST_CFLAGS) $(HOST_CMFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) - -$(HOST_CMMOBJS): - $(REPORT_BUILD) - $(ELOG) $(HOST_CXX) $(HOST_OUTOPTION)$@ -c $(HOST_CXXFLAGS) $(HOST_CMMFLAGS) $(INCLUDES) $(NSPR_CFLAGS) $(_VPATH_SRCS) - -$(COBJS): - $(REPORT_BUILD) - @$(MAKE_DEPS_AUTO_CC) - $(ELOG) $(CC) $(OUTOPTION)$@ -c $(COMPILE_CFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -# DEFINES and ACDEFINES are needed here to enable conditional compilation of Q_OBJECTs: -# 'moc' only knows about #defines it gets on the command line (-D...), not in -# included headers like mozilla-config.h -$(filter moc_%.cpp,$(CPPSRCS)): moc_%.cpp: %.h - $(REPORT_BUILD) - $(ELOG) $(MOC) $(DEFINES) $(ACDEFINES) $< $(OUTOPTION)$@ - -$(filter moc_%.cc,$(CPPSRCS)): moc_%.cc: %.cc - $(REPORT_BUILD) - $(ELOG) $(MOC) $(DEFINES) $(ACDEFINES) $(_VPATH_SRCS:.cc=.h) $(OUTOPTION)$@ - -$(filter qrc_%.cpp,$(CPPSRCS)): qrc_%.cpp: %.qrc - $(REPORT_BUILD) - $(ELOG) $(RCC) -name $* $< $(OUTOPTION)$@ - -ifdef ASFILES -# The AS_DASH_C_FLAG is needed cause not all assemblers (Solaris) accept -# a '-c' flag. -$(ASOBJS): - $(REPORT_BUILD) - $(AS) $(ASOUTOPTION)$@ $(ASFLAGS) $(AS_DASH_C_FLAG) $(_VPATH_SRCS) -endif - -$(SOBJS): - $(REPORT_BUILD) - $(AS) -o $@ $(ASFLAGS) $(LOCAL_INCLUDES) $(TARGET_LOCAL_INCLUDES) -c $< - -$(CPPOBJS): - $(REPORT_BUILD) - @$(MAKE_DEPS_AUTO_CXX) - $(ELOG) $(CCC) $(OUTOPTION)$@ -c $(COMPILE_CXXFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(CMMOBJS): - $(REPORT_BUILD) - @$(MAKE_DEPS_AUTO_CXX) - $(ELOG) $(CCC) -o $@ -c $(COMPILE_CXXFLAGS) $(COMPILE_CMMFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(CMOBJS): - $(REPORT_BUILD) - @$(MAKE_DEPS_AUTO_CC) - $(ELOG) $(CC) -o $@ -c $(COMPILE_CFLAGS) $(COMPILE_CMFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(filter %.s,$(CPPSRCS:%.cpp=%.s)): %.s: %.cpp $(call mkdir_deps,$(MDDEPDIR)) - $(REPORT_BUILD) - $(CCC) -S $(COMPILE_CXXFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(filter %.s,$(CPPSRCS:%.cc=%.s)): %.s: %.cc $(call mkdir_deps,$(MDDEPDIR)) - $(REPORT_BUILD) - $(CCC) -S $(COMPILE_CXXFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(filter %.s,$(CSRCS:%.c=%.s)): %.s: %.c $(call mkdir_deps,$(MDDEPDIR)) - $(REPORT_BUILD) - $(CC) -S $(COMPILE_CFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(filter %.i,$(CPPSRCS:%.cpp=%.i)): %.i: %.cpp $(call mkdir_deps,$(MDDEPDIR)) - $(REPORT_BUILD) - $(CCC) -C $(PREPROCESS_OPTION)$@ $(COMPILE_CXXFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(filter %.i,$(CPPSRCS:%.cc=%.i)): %.i: %.cc $(call mkdir_deps,$(MDDEPDIR)) - $(REPORT_BUILD) - $(CCC) -C $(PREPROCESS_OPTION)$@ $(COMPILE_CXXFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(filter %.i,$(CSRCS:%.c=%.i)): %.i: %.c $(call mkdir_deps,$(MDDEPDIR)) - $(REPORT_BUILD) - $(CC) -C $(PREPROCESS_OPTION)$@ $(COMPILE_CFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(filter %.i,$(CMMSRCS:%.mm=%.i)): %.i: %.mm $(call mkdir_deps,$(MDDEPDIR)) - $(REPORT_BUILD) - $(CCC) -C $(PREPROCESS_OPTION)$@ $(COMPILE_CXXFLAGS) $(COMPILE_CMMFLAGS) $(TARGET_LOCAL_INCLUDES) $(_VPATH_SRCS) - -$(RESFILE): %.res: %.rc - $(REPORT_BUILD) - @echo Creating Resource file: $@ -ifeq ($(OS_ARCH),OS2) - $(RC) $(RCFLAGS:-D%=-d %) -i $(subst /,\,$(srcdir)) -r $< $@ -else -ifdef GNU_CC - $(RC) $(RCFLAGS) $(filter-out -U%,$(DEFINES)) $(INCLUDES:-I%=--include-dir %) $(OUTOPTION)$@ $(_VPATH_SRCS) -else - $(RC) $(RCFLAGS) -r $(DEFINES) $(INCLUDES) $(OUTOPTION)$@ $(_VPATH_SRCS) -endif -endif - -# Cancel GNU make built-in implicit rules -ifndef .PYMAKE -MAKEFLAGS += -r -endif - -ifneq (,$(filter OS2 WINNT,$(OS_ARCH))) -SEP := ; -else -SEP := : -endif - -EMPTY := -SPACE := $(EMPTY) $(EMPTY) - -# MSYS has its own special path form, but javac expects the source and class -# paths to be in the DOS form (i.e. e:/builds/...). This function does the -# appropriate conversion on Windows, but is a noop on other systems. -ifeq ($(HOST_OS_ARCH),WINNT) -# We use 'pwd -W' to get DOS form of the path. However, since the given path -# could be a file or a non-existent path, we cannot call 'pwd -W' directly -# on the path. Instead, we extract the root path (i.e. "c:/"), call 'pwd -W' -# on it, then merge with the rest of the path. -root-path = $(shell echo $(1) | sed -e 's|\(/[^/]*\)/\?\(.*\)|\1|') -non-root-path = $(shell echo $(1) | sed -e 's|\(/[^/]*\)/\?\(.*\)|\2|') -normalizepath = $(foreach p,$(1),$(if $(filter /%,$(1)),$(patsubst %/,%,$(shell cd $(call root-path,$(1)) && pwd -W))/$(call non-root-path,$(1)),$(1))) -else -normalizepath = $(1) -endif - -############################################################################### -# Java rules -############################################################################### -ifneq (,$(JAVAFILES)$(ANDROID_RESFILES)$(ANDROID_APKNAME)$(JAVA_JAR_TARGETS)) - include $(topsrcdir)/config/makefiles/java-build.mk -endif - -############################################################################### -# Bunch of things that extend the 'export' rule (in order): -############################################################################### - -ifneq ($(XPI_NAME),) -$(FINAL_TARGET): - $(NSINSTALL) -D $@ - -export:: $(FINAL_TARGET) -endif - -################################################################################ -# Copy each element of PREF_JS_EXPORTS - -# The default location for PREF_JS_EXPORTS is the gre prefs directory. -PREF_DIR = defaults/pref - -# If DIST_SUBDIR is defined it indicates that app and gre dirs are -# different and that we are building app related resources. Hence, -# PREF_DIR should point to the app prefs location. -ifneq (,$(DIST_SUBDIR)$(XPI_NAME)$(LIBXUL_SDK)) -PREF_DIR = defaults/preferences -endif - -# on win32, pref files need CRLF line endings... see bug 206029 -ifeq (WINNT,$(OS_ARCH)) -PREF_PPFLAGS += --line-endings=crlf -endif - -ifneq ($(PREF_JS_EXPORTS),) -ifndef NO_DIST_INSTALL -PREF_JS_EXPORTS_PATH := $(FINAL_TARGET)/$(PREF_DIR) -PREF_JS_EXPORTS_FLAGS := $(PREF_PPFLAGS) -PP_TARGETS += PREF_JS_EXPORTS -endif -endif - -################################################################################ -# Copy each element of AUTOCFG_JS_EXPORTS to $(FINAL_TARGET)/defaults/autoconfig - -ifneq ($(AUTOCFG_JS_EXPORTS),) -ifndef NO_DIST_INSTALL -AUTOCFG_JS_EXPORTS_FILES := $(AUTOCFG_JS_EXPORTS) -AUTOCFG_JS_EXPORTS_DEST := $(FINAL_TARGET)/defaults/autoconfig -AUTOCFG_JS_EXPORTS_TARGET := export -INSTALL_TARGETS += AUTOCFG_JS_EXPORTS -endif -endif - -################################################################################ -# Install a linked .xpt into the appropriate place. -# This should ideally be performed by the non-recursive idl make file. Some day. -ifdef XPT_NAME #{ - -ifndef NO_DIST_INSTALL -_XPT_NAME_FILES := $(DEPTH)/config/makefiles/xpidl/xpt/$(XPT_NAME) -_XPT_NAME_DEST := $(FINAL_TARGET)/components -INSTALL_TARGETS += _XPT_NAME - -ifndef NO_INTERFACES_MANIFEST -libs:: $(call mkdir_deps,$(FINAL_TARGET)/components) - $(call py_action,buildlist,$(FINAL_TARGET)/components/interfaces.manifest 'interfaces $(XPT_NAME)') - $(call py_action,buildlist,$(FINAL_TARGET)/chrome.manifest 'manifest components/interfaces.manifest') -endif -endif - -endif #} XPT_NAME - -################################################################################ -# Copy each element of EXTRA_COMPONENTS to $(FINAL_TARGET)/components -ifneq (,$(filter %.js,$(EXTRA_COMPONENTS) $(EXTRA_PP_COMPONENTS))) -ifeq (,$(filter %.manifest,$(EXTRA_COMPONENTS) $(EXTRA_PP_COMPONENTS))) -ifndef NO_JS_MANIFEST -$(error .js component without matching .manifest. See https://developer.mozilla.org/en/XPCOM/XPCOM_changes_in_Gecko_2.0) -endif -endif -endif - -ifdef EXTRA_COMPONENTS -libs:: $(EXTRA_COMPONENTS) -ifndef NO_DIST_INSTALL -EXTRA_COMPONENTS_FILES := $(EXTRA_COMPONENTS) -EXTRA_COMPONENTS_DEST := $(FINAL_TARGET)/components -INSTALL_TARGETS += EXTRA_COMPONENTS -endif - -endif - -ifdef EXTRA_PP_COMPONENTS -ifndef NO_DIST_INSTALL -EXTRA_PP_COMPONENTS_PATH := $(FINAL_TARGET)/components -PP_TARGETS += EXTRA_PP_COMPONENTS -endif -endif - -EXTRA_MANIFESTS = $(filter %.manifest,$(EXTRA_COMPONENTS) $(EXTRA_PP_COMPONENTS)) -ifneq (,$(EXTRA_MANIFESTS)) -libs:: $(call mkdir_deps,$(FINAL_TARGET)) - $(call py_action,buildlist,$(FINAL_TARGET)/chrome.manifest $(patsubst %,'manifest components/%',$(notdir $(EXTRA_MANIFESTS)))) -endif - -################################################################################ -# Copy each element of EXTRA_JS_MODULES to -# $(FINAL_TARGET)/$(JS_MODULES_PATH). JS_MODULES_PATH defaults to "modules" -# if it is undefined. -JS_MODULES_PATH ?= modules -FINAL_JS_MODULES_PATH := $(FINAL_TARGET)/$(JS_MODULES_PATH) - -ifdef EXTRA_JS_MODULES -ifndef NO_DIST_INSTALL -EXTRA_JS_MODULES_FILES := $(EXTRA_JS_MODULES) -EXTRA_JS_MODULES_DEST := $(FINAL_JS_MODULES_PATH) -INSTALL_TARGETS += EXTRA_JS_MODULES -endif -endif - -ifdef EXTRA_PP_JS_MODULES -ifndef NO_DIST_INSTALL -EXTRA_PP_JS_MODULES_PATH := $(FINAL_JS_MODULES_PATH) -PP_TARGETS += EXTRA_PP_JS_MODULES -endif -endif - -################################################################################ -# Copy testing-only JS modules to appropriate destination. -# -# For each file defined in TESTING_JS_MODULES, copy it to -# objdir/_tests/modules/. If TESTING_JS_MODULE_DIR is defined, that path -# wlll be appended to the output directory. - -ifdef ENABLE_TESTS -ifdef TESTING_JS_MODULES -testmodulesdir = $(DEPTH)/_tests/modules/$(TESTING_JS_MODULE_DIR) - -GENERATED_DIRS += $(testmodulesdir) - -ifndef NO_DIST_INSTALL -TESTING_JS_MODULES_FILES := $(TESTING_JS_MODULES) -TESTING_JS_MODULES_DEST := $(testmodulesdir) -INSTALL_TARGETS += TESTING_JS_MODULES -endif - -endif -endif - -################################################################################ -# SDK - -ifneq (,$(SDK_LIBRARY)) -ifndef NO_DIST_INSTALL -SDK_LIBRARY_FILES := $(SDK_LIBRARY) -SDK_LIBRARY_DEST := $(SDK_LIB_DIR) -INSTALL_TARGETS += SDK_LIBRARY -endif -endif # SDK_LIBRARY - -ifneq (,$(strip $(SDK_BINARY))) -ifndef NO_DIST_INSTALL -SDK_BINARY_FILES := $(SDK_BINARY) -SDK_BINARY_DEST := $(SDK_BIN_DIR) -INSTALL_TARGETS += SDK_BINARY -endif -endif # SDK_BINARY - -################################################################################ -# CHROME PACKAGING - -chrome:: - $(MAKE) realchrome - $(LOOP_OVER_PARALLEL_DIRS) - $(LOOP_OVER_DIRS) - $(LOOP_OVER_TOOL_DIRS) - -$(FINAL_TARGET)/chrome: $(call mkdir_deps,$(FINAL_TARGET)/chrome) - -ifneq (,$(JAR_MANIFEST)) -ifndef NO_DIST_INSTALL - -ifdef XPI_NAME -ifdef XPI_ROOT_APPID -# For add-on packaging we may specify that an application -# sub-dir should be added to the root chrome manifest with -# a specific application id. -MAKE_JARS_FLAGS += --root-manifest-entry-appid='$(XPI_ROOT_APPID)' -endif - -# if DIST_SUBDIR is defined but XPI_ROOT_APPID is not there's -# no way langpacks will get packaged right, so error out. -ifneq (,$(DIST_SUBDIR)) -ifndef XPI_ROOT_APPID -$(error XPI_ROOT_APPID is not defined - langpacks will break.) -endif -endif -endif - -libs realchrome:: $(FINAL_TARGET)/chrome - $(call py_action,jar_maker,\ - $(QUIET) -j $(FINAL_TARGET)/chrome \ - $(MAKE_JARS_FLAGS) $(XULPPFLAGS) $(DEFINES) $(ACDEFINES) \ - $(JAR_MANIFEST)) - -endif - -# This is a temporary check to ensure patches relying on the old behavior -# of silently picking up jar.mn files continue to work. -else # No JAR_MANIFEST -ifneq (,$(wildcard $(srcdir)/jar.mn)) -$(error $(srcdir) contains a jar.mn file but this file is not declared in a JAR_MANIFESTS variable in a moz.build file) -endif -endif - -ifneq ($(DIST_FILES),) -DIST_FILES_PATH := $(FINAL_TARGET) -DIST_FILES_FLAGS := $(XULAPP_DEFINES) -PP_TARGETS += DIST_FILES -endif - -ifneq ($(DIST_CHROME_FILES),) -DIST_CHROME_FILES_PATH := $(FINAL_TARGET)/chrome -DIST_CHROME_FILES_FLAGS := $(XULAPP_DEFINES) -PP_TARGETS += DIST_CHROME_FILES -endif - -ifneq ($(XPI_PKGNAME),) -tools realchrome:: -ifdef STRIP_XPI -ifndef MOZ_DEBUG - @echo 'Stripping $(XPI_PKGNAME) package directory...' - @echo $(FINAL_TARGET) - @cd $(FINAL_TARGET) && find . ! -type d \ - ! -name '*.js' \ - ! -name '*.xpt' \ - ! -name '*.gif' \ - ! -name '*.jpg' \ - ! -name '*.png' \ - ! -name '*.xpm' \ - ! -name '*.txt' \ - ! -name '*.rdf' \ - ! -name '*.sh' \ - ! -name '*.properties' \ - ! -name '*.dtd' \ - ! -name '*.html' \ - ! -name '*.xul' \ - ! -name '*.css' \ - ! -name '*.xml' \ - ! -name '*.jar' \ - ! -name '*.dat' \ - ! -name '*.tbl' \ - ! -name '*.src' \ - ! -name '*.reg' \ - $(PLATFORM_EXCLUDE_LIST) \ - -exec $(STRIP) $(STRIP_FLAGS) {} >/dev/null 2>&1 \; -endif -endif - @echo 'Packaging $(XPI_PKGNAME).xpi...' - cd $(FINAL_TARGET) && $(ZIP) -qr ../$(XPI_PKGNAME).xpi * -endif - -ifdef INSTALL_EXTENSION_ID -ifndef XPI_NAME -$(error XPI_NAME must be set for INSTALL_EXTENSION_ID) -endif - -tools:: - $(RM) -r '$(DIST)/bin$(DIST_SUBDIR:%=/%)/extensions/$(INSTALL_EXTENSION_ID)' - $(NSINSTALL) -D '$(DIST)/bin$(DIST_SUBDIR:%=/%)/extensions/$(INSTALL_EXTENSION_ID)' - $(call copy_dir,$(FINAL_TARGET),$(DIST)/bin$(DIST_SUBDIR:%=/%)/extensions/$(INSTALL_EXTENSION_ID)) - -endif - -############################################################################# -# MDDEPDIR is the subdirectory where all the dependency files are placed. -# This uses a make rule (instead of a macro) to support parallel -# builds (-jN). If this were done in the LOOP_OVER_DIRS macro, two -# processes could simultaneously try to create the same directory. -# -# We use $(CURDIR) in the rule's target to ensure that we don't find -# a dependency directory in the source tree via VPATH (perhaps from -# a previous build in the source tree) and thus neglect to create a -# dependency directory in the object directory, where we really need -# it. - -ifneq (,$(filter-out all chrome default export realchrome clean clobber clobber_all distclean realclean,$(MAKECMDGOALS))) -MDDEPEND_FILES := $(strip $(wildcard $(addprefix $(MDDEPDIR)/,$(EXTRA_MDDEPEND_FILES) $(addsuffix .pp,$(notdir $(sort $(OBJS) $(PROGOBJS) $(HOST_OBJS) $(HOST_PROGOBJS))) $(TARGETS))))) - -ifneq (,$(MDDEPEND_FILES)) -$(call include_deps,$(MDDEPEND_FILES)) -endif - -endif - - -ifneq (,$(filter export,$(MAKECMDGOALS))) -MDDEPEND_FILES := $(strip $(wildcard $(addprefix $(MDDEPDIR)/,$(EXTRA_EXPORT_MDDEPEND_FILES)))) - -ifneq (,$(MDDEPEND_FILES)) -$(call include_deps,$(MDDEPEND_FILES)) -endif - -endif - -############################################################################# - --include $(topsrcdir)/$(MOZ_BUILD_APP)/app-rules.mk --include $(MY_RULES) - -# -# Generate Emacs tags in a file named TAGS if ETAGS was set in $(MY_CONFIG) -# or in $(MY_RULES) -# -ifdef ETAGS -ifneq ($(CSRCS)$(CPPSRCS)$(HEADERS),) -all:: TAGS -TAGS:: $(CSRCS) $(CPPSRCS) $(HEADERS) - $(ETAGS) $(CSRCS) $(CPPSRCS) $(HEADERS) -endif -endif - -################################################################################ -# Install/copy rules -# -# The INSTALL_TARGETS variable contains a list of all install target -# categories. Each category defines a list of files and executables, and an -# install destination, -# -# FOO_FILES := foo bar -# FOO_EXECUTABLES := baz -# FOO_DEST := target_path -# INSTALL_TARGETS += FOO -# -# Additionally, a FOO_TARGET variable may be added to indicate the target for -# which the files and executables are installed. Default is "libs". -# -# Finally, a FOO_KEEP_PATH variable may be set to 1 to indicate the paths given -# in FOO_FILES/FOO_EXECUTABLES are to be kept at the destination. That is, -# if FOO_FILES is bar/baz/qux.h, and FOO_DEST is $(DIST)/include, the installed -# file would be $(DIST)/include/bar/baz/qux.h instead of $(DIST)/include/qux.h - -# If we're using binary nsinstall and it's not built yet, fallback to python nsinstall. -ifneq (,$(filter $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX),$(install_cmd))) -ifeq (,$(wildcard $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX))) -nsinstall_is_usable = $(if $(wildcard $(CONFIG_TOOLS)/nsinstall$(HOST_BIN_SUFFIX)),yes) - -define install_cmd_override -$(1): install_cmd = $$(if $$(nsinstall_is_usable),$$(INSTALL),$$(NSINSTALL_PY)) $$(1) -endef -endif -endif - -install_target_tier = $(or $($(1)_TARGET),libs) -INSTALL_TARGETS_TIERS := $(sort $(foreach category,$(INSTALL_TARGETS),$(call install_target_tier,$(category)))) - -install_target_result = $($(1)_DEST:%/=%)/$(if $($(1)_KEEP_PATH),$(2),$(notdir $(2))) -install_target_files = $(foreach file,$($(1)_FILES),$(call install_target_result,$(category),$(file))) -install_target_executables = $(foreach file,$($(1)_EXECUTABLES),$(call install_target_result,$(category),$(file))) - -# Work around a GNU make 3.81 bug where it gives $< the wrong value. -# See details in bug 934864. -define create_dependency -$(1): $(2) -$(1): $(2) -endef - -define install_target_template -$(call install_cmd_override,$(2)) -$(call create_dependency,$(2),$(1)) -endef - -$(foreach category,$(INSTALL_TARGETS),\ - $(if $($(category)_DEST),,$(error Missing $(category)_DEST)) \ - $(foreach tier,$(call install_target_tier,$(category)),\ - $(eval INSTALL_TARGETS_FILES_$(tier) += $(call install_target_files,$(category))) \ - $(eval INSTALL_TARGETS_EXECUTABLES_$(tier) += $(call install_target_executables,$(category))) \ - ) \ - $(foreach file,$($(category)_FILES) $($(category)_EXECUTABLES), \ - $(eval $(call install_target_template,$(file),$(call install_target_result,$(category),$(file)))) \ - ) \ -) - -$(foreach tier,$(INSTALL_TARGETS_TIERS), \ - $(eval $(tier):: $(INSTALL_TARGETS_FILES_$(tier)) $(INSTALL_TARGETS_EXECUTABLES_$(tier))) \ -) - -install_targets_sanity = $(if $(filter-out $(notdir $@),$(notdir $(<))),$(error Looks like $@ has an unexpected dependency on $< which breaks INSTALL_TARGETS)) - -$(sort $(foreach tier,$(INSTALL_TARGETS_TIERS),$(INSTALL_TARGETS_FILES_$(tier)))): - $(install_targets_sanity) - $(call install_cmd,$(IFLAGS1) '$<' '$(@D)') - -$(sort $(foreach tier,$(INSTALL_TARGETS_TIERS),$(INSTALL_TARGETS_EXECUTABLES_$(tier)))): - $(install_targets_sanity) - $(call install_cmd,$(IFLAGS2) '$<' '$(@D)') - -################################################################################ -# Preprocessing rules -# -# The PP_TARGETS variable contains a list of all preprocessing target -# categories. Each category has associated variables listing input files, the -# output directory, extra preprocessor flags, and so on. For example: -# -# FOO := input-file -# FOO_PATH := target-directory -# FOO_FLAGS := -Dsome_flag -# PP_TARGETS += FOO -# -# If PP_TARGETS lists a category name (like FOO, above), then we consult the -# following make variables to see what to do: -# -# - lists input files to be preprocessed with mozbuild.action.preprocessor. -# We search VPATH for the names given here. If an input file name ends in -# '.in', that suffix is omitted from the output file name. -# -# - _PATH names the directory in which to place the preprocessed output -# files. We create this directory if it does not already exist. Setting -# this variable is optional; if unset, we install the files in $(CURDIR). -# -# - _FLAGS lists flags to pass to mozbuild.action.preprocessor, in addition -# to the usual bunch. Setting this variable is optional. -# -# - _TARGET names the 'make' target that should depend on creating the output -# files. Setting this variable is optional; if unset, we preprocess the -# files for the 'libs' target. -# -# - _KEEP_PATH may be set to 1 to indicate the paths given in are to be -# kept under _PATH. That is, if is bar/baz/qux.h.in and _PATH is -# $(DIST)/include, the preprocessed file would be $(DIST)/include/bar/baz/qux.h -# instead of $(DIST)/include/qux.h. - -pp_target_tier = $(or $($(1)_TARGET),libs) -PP_TARGETS_TIERS := $(sort $(foreach category,$(PP_TARGETS),$(call pp_target_tier,$(category)))) - -pp_target_result = $(or $($(1)_PATH:%/=%),$(CURDIR))/$(if $($(1)_KEEP_PATH),$(2:.in=),$(notdir $(2:.in=))) -pp_target_results = $(foreach file,$($(1)),$(call pp_target_result,$(category),$(file))) - -$(foreach category,$(PP_TARGETS), \ - $(foreach tier,$(call pp_target_tier,$(category)), \ - $(eval PP_TARGETS_RESULTS_$(tier) += $(call pp_target_results,$(category))) \ - ) \ - $(foreach file,$($(category)), \ - $(eval $(call create_dependency,$(call pp_target_result,$(category),$(file)), \ - $(file) $(GLOBAL_DEPS))) \ - ) \ - $(eval $(call pp_target_results,$(category)): PP_TARGET_FLAGS=$($(category)_FLAGS)) \ -) - -$(foreach tier,$(PP_TARGETS_TIERS), \ - $(eval $(tier):: $(PP_TARGETS_RESULTS_$(tier))) \ -) - -PP_TARGETS_ALL_RESULTS := $(sort $(foreach tier,$(PP_TARGETS_TIERS),$(PP_TARGETS_RESULTS_$(tier)))) -$(PP_TARGETS_ALL_RESULTS): - $(if $(filter-out $(notdir $@),$(notdir $(<:.in=))),$(error Looks like $@ has an unexpected dependency on $< which breaks PP_TARGETS)) - $(RM) '$@' - $(call py_action,preprocessor,--depend $(MDDEPDIR)/$(@F).pp $(PP_TARGET_FLAGS) $(DEFINES) $(ACDEFINES) $(XULPPFLAGS) '$<' -o '$@') - -# The depfile is based on the filename, and we don't want conflicts. So check -# there's only one occurrence of any given filename in PP_TARGETS_ALL_RESULTS. -PP_TARGETS_ALL_RESULT_NAMES := $(notdir $(PP_TARGETS_ALL_RESULTS)) -$(foreach file,$(sort $(PP_TARGETS_ALL_RESULT_NAMES)), \ - $(if $(filter-out 1,$(words $(filter $(file),$(PP_TARGETS_ALL_RESULT_NAMES)))), \ - $(error Multiple preprocessing rules are creating a $(file) file) \ - ) \ -) - -ifneq (,$(filter $(PP_TARGETS_TIERS) $(PP_TARGETS_ALL_RESULTS),$(MAKECMDGOALS))) -# If the depfile for a preprocessed file doesn't exist, add a dep to force -# re-preprocessing. -$(foreach file,$(PP_TARGETS_ALL_RESULTS), \ - $(if $(wildcard $(MDDEPDIR)/$(notdir $(file)).pp), \ - , \ - $(eval $(file): FORCE) \ - ) \ -) - -MDDEPEND_FILES := $(strip $(wildcard $(addprefix $(MDDEPDIR)/,$(addsuffix .pp,$(notdir $(PP_TARGETS_ALL_RESULTS)))))) - -ifneq (,$(MDDEPEND_FILES)) -$(call include_deps,$(MDDEPEND_FILES)) -endif - -endif - -# Pull in non-recursive targets if this is a partial tree build. -ifndef TOPLEVEL_BUILD -include $(topsrcdir)/config/makefiles/nonrecursive.mk -endif - -################################################################################ -# Special gmake rules. -################################################################################ - - -# -# Re-define the list of default suffixes, so gmake won't have to churn through -# hundreds of built-in suffix rules for stuff we don't need. -# -.SUFFIXES: - -# -# Fake targets. Always run these rules, even if a file/directory with that -# name already exists. -# -.PHONY: all alltags boot checkout chrome realchrome clean clobber clobber_all export install libs makefiles realclean run_apprunner tools $(DIRS) $(TOOL_DIRS) FORCE - -# Used as a dependency to force targets to rebuild -FORCE: - -# Delete target if error occurs when building target -.DELETE_ON_ERROR: - -tags: TAGS - -TAGS: $(CSRCS) $(CPPSRCS) $(wildcard *.h) - -etags $(CSRCS) $(CPPSRCS) $(wildcard *.h) - $(LOOP_OVER_PARALLEL_DIRS) - $(LOOP_OVER_DIRS) - -ifndef INCLUDED_DEBUGMAKE_MK #{ - ## Only parse when an echo* or show* target is requested - ifneq (,$(call isTargetStem,echo,show)) - include $(topsrcdir)/config/makefiles/debugmake.mk - endif #} -endif #} - -documentation: - @cd $(DEPTH) - $(DOXYGEN) $(DEPTH)/config/doxygen.cfg - -ifdef ENABLE_TESTS -check:: - $(LOOP_OVER_PARALLEL_DIRS) - $(LOOP_OVER_DIRS) - $(LOOP_OVER_TOOL_DIRS) -endif - - -FREEZE_VARIABLES = \ - CSRCS \ - CPPSRCS \ - EXPORTS \ - DIRS \ - LIBRARY \ - MODULE \ - TIERS \ - EXTRA_COMPONENTS \ - EXTRA_PP_COMPONENTS \ - MOCHITEST_FILES \ - MOCHITEST_CHROME_FILES \ - MOCHITEST_BROWSER_FILES \ - MOCHITEST_A11Y_FILES \ - MOCHITEST_METRO_FILES \ - MOCHITEST_ROBOCOP_FILES \ - $(NULL) - -$(foreach var,$(FREEZE_VARIABLES),$(eval $(var)_FROZEN := '$($(var))')) - -CHECK_FROZEN_VARIABLES = $(foreach var,$(FREEZE_VARIABLES), \ - $(if $(subst $($(var)_FROZEN),,'$($(var))'),$(error Makefile variable '$(var)' changed value after including rules.mk. Was $($(var)_FROZEN), now $($(var)).))) - -libs export:: - $(CHECK_FROZEN_VARIABLES) - -PURGECACHES_DIRS ?= $(DIST)/bin -ifdef MOZ_WEBAPP_RUNTIME -PURGECACHES_DIRS += $(DIST)/bin/webapprt -endif - -PURGECACHES_FILES = $(addsuffix /.purgecaches,$(PURGECACHES_DIRS)) - -default all:: $(PURGECACHES_FILES) - -$(PURGECACHES_FILES): - if test -d $(@D) ; then touch $@ ; fi - -.DEFAULT_GOAL := $(or $(OVERRIDE_DEFAULT_GOAL),default) - -############################################################################# -# Derived targets and dependencies - -include $(topsrcdir)/config/makefiles/autotargets.mk -ifneq ($(NULL),$(AUTO_DEPS)) - default all libs tools export:: $(AUTO_DEPS) -endif - -export:: $(GENERATED_FILES) - -GARBAGE += $(GENERATED_FILES) diff --git a/js/src/config/solaris_ia32.map b/js/src/config/solaris_ia32.map deleted file mode 100644 index be6ea3736e7..00000000000 --- a/js/src/config/solaris_ia32.map +++ /dev/null @@ -1,5 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -hwcap_1 = OVERRIDE; diff --git a/js/src/config/static-checking-config.mk b/js/src/config/static-checking-config.mk deleted file mode 100644 index 8e6a5981868..00000000000 --- a/js/src/config/static-checking-config.mk +++ /dev/null @@ -1,36 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -DEHYDRA_SCRIPT = $(topsrcdir)/config/static-checking.js - -DEHYDRA_MODULES = \ - $(NULL) - -TREEHYDRA_MODULES = \ - $(topsrcdir)/jsstack.js \ - $(NULL) - -DEHYDRA_ARG_PREFIX=-fplugin-arg-gcc_treehydra- - -DEHYDRA_ARGS = \ - $(DEHYDRA_ARG_PREFIX)script=$(DEHYDRA_SCRIPT) \ - $(DEHYDRA_ARG_PREFIX)topsrcdir=$(topsrcdir) \ - $(DEHYDRA_ARG_PREFIX)objdir=$(DEPTH) \ - $(DEHYDRA_ARG_PREFIX)dehydra-modules=$(subst $(NULL) ,$(COMMA),$(strip $(DEHYDRA_MODULES))) \ - $(DEHYDRA_ARG_PREFIX)treehydra-modules=$(subst $(NULL) ,$(COMMA),$(strip $(TREEHYDRA_MODULES))) \ - $(NULL) - -DEHYDRA_FLAGS = -fplugin=$(DEHYDRA_PATH) $(DEHYDRA_ARGS) - -ifdef DEHYDRA_PATH -OS_CXXFLAGS += $(DEHYDRA_FLAGS) -endif - -ifdef ENABLE_CLANG_PLUGIN -# Load the clang plugin from the mozilla topsrcdir. This implies that the clang -# plugin is only usable if we're building js/src under mozilla/, though. -CLANG_PLUGIN := $(DEPTH)/../../build/clang-plugin/$(DLL_PREFIX)clang-plugin$(DLL_SUFFIX) -OS_CXXFLAGS += -Xclang -load -Xclang $(CLANG_PLUGIN) -Xclang -add-plugin -Xclang moz-check -OS_CFLAGS += -Xclang -load -Xclang $(CLANG_PLUGIN) -Xclang -add-plugin -Xclang moz-check -endif diff --git a/js/src/config/static-checking.js b/js/src/config/static-checking.js deleted file mode 100644 index 9e59741ba11..00000000000 --- a/js/src/config/static-checking.js +++ /dev/null @@ -1,147 +0,0 @@ -/* This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ - -/** - * A script for GCC-dehydra to analyze the Mozilla codebase and catch - * patterns that are incorrect, but which cannot be detected by a compiler. */ - -/** - * Activate Treehydra outparams analysis if running in Treehydra. - */ - -function treehydra_enabled() { - return this.hasOwnProperty('TREE_CODE'); -} - -sys.include_path.push(options.topsrcdir); - -include('string-format.js'); - -let modules = []; - -function LoadModules(modulelist) -{ - if (modulelist == "") - return; - - let modulenames = modulelist.split(','); - for each (let modulename in modulenames) { - let module = { __proto__: this }; - include(modulename, module); - modules.push(module); - } -} - -LoadModules(options['dehydra-modules']); -if (treehydra_enabled()) - LoadModules(options['treehydra-modules']); - -function process_type(c) -{ - for each (let module in modules) - if (module.hasOwnProperty('process_type')) - module.process_type(c); -} - -function hasAttribute(c, attrname) -{ - var attr; - - if (c.attributes === undefined) - return false; - - for each (attr in c.attributes) - if (attr.name == 'user' && attr.value[0] == attrname) - return true; - - return false; -} - -// This is useful for detecting method overrides -function signaturesMatch(m1, m2) -{ - if (m1.shortName != m2.shortName) - return false; - - if ((!!m1.isVirtual) != (!!m2.isVirtual)) - return false; - - if (m1.isStatic != m2.isStatic) - return false; - - let p1 = m1.type.parameters; - let p2 = m2.type.parameters; - - if (p1.length != p2.length) - return false; - - for (let i = 0; i < p1.length; ++i) - if (!params_match(p1[i], p2[i])) - return false; - - return true; -} - -function params_match(p1, p2) -{ - [p1, p2] = unwrap_types(p1, p2); - - for (let i in p1) - if (i == "type" && !types_match(p1.type, p2.type)) - return false; - else if (i != "type" && p1[i] !== p2[i]) - return false; - - for (let i in p2) - if (!(i in p1)) - return false; - - return true; -} - -function types_match(t1, t2) -{ - if (!t1 || !t2) - return false; - - [t1, t2] = unwrap_types(t1, t2); - - return t1 === t2; -} - -function unwrap_types(t1, t2) -{ - while (t1.variantOf) - t1 = t1.variantOf; - - while (t2.variantOf) - t2 = t2.variantOf; - - return [t1, t2]; -} - -const forward_functions = [ - 'process_type', - 'process_tree_type', - 'process_decl', - 'process_tree_decl', - 'process_function', - 'process_tree', - 'process_cp_pre_genericize', - 'input_end' -]; - -function setup_forwarding(n) -{ - this[n] = function() { - for each (let module in modules) { - if (module.hasOwnProperty(n)) { - module[n].apply(this, arguments); - } - } - } -} - -for each (let n in forward_functions) - setup_forwarding(n); diff --git a/js/src/config/string-format.js b/js/src/config/string-format.js deleted file mode 100644 index 7319eb85989..00000000000 --- a/js/src/config/string-format.js +++ /dev/null @@ -1,65 +0,0 @@ -/* This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ - -String.prototype.format = function string_format() { - // there are two modes of operation... unnamed indices are read in order; - // named indices using %(name)s. The two styles cannot be mixed. - // Unnamed indices can be passed as either a single argument to this function, - // multiple arguments to this function, or as a single array argument - let curindex = 0; - let d; - - if (arguments.length > 1) { - d = arguments; - } - else - d = arguments[0]; - - function r(s, key, type) { - if (type == '%') - return '%'; - - let v; - if (key == "") { - if (curindex == -1) - throw Error("Cannot mix named and positional indices in string formatting."); - - if (curindex == 0 && (!(d instanceof Object) || !(0 in d))) { - v = d; - } - else if (!(curindex in d)) - throw Error("Insufficient number of items in format, requesting item %i".format(curindex)); - else { - v = d[curindex]; - } - - ++curindex; - } - else { - key = key.slice(1, -1); - if (curindex > 0) - throw Error("Cannot mix named and positional indices in string formatting."); - curindex = -1; - - if (!(key in d)) - throw Error("Key '%s' not present during string substitution.".format(key)); - v = d[key]; - } - switch (type) { - case "s": - if (v === undefined) - return ""; - return v.toString(); - case "r": - return uneval(v); - case "i": - return parseInt(v); - case "f": - return Number(v); - default: - throw Error("Unexpected format character '%s'.".format(type)); - } - } - return this.replace(/%(\([^)]+\))?(.)/g, r); -}; diff --git a/js/src/config/system-headers b/js/src/config/system-headers deleted file mode 100644 index 8803150a755..00000000000 --- a/js/src/config/system-headers +++ /dev/null @@ -1,1147 +0,0 @@ -nspr.h -plarena.h -plarenas.h -plbase64.h -plerror.h -plgetopt.h -plhash.h -plstr.h -pratom.h -prbit.h -prclist.h -prcmon.h -prcountr.h -prcpucfg.h -prcvar.h -prdtoa.h -prenv.h -prerr.h -prerror.h -prinet.h -prinit.h -prinrval.h -prio.h -pripcsem.h -private -prlink.h -prlock.h -prlog.h -prlong.h -prmem.h -prmon.h -prmwait.h -prnetdb.h -prolock.h -prpdce.h -prprf.h -prproces.h -prrng.h -prrwlock.h -prshm.h -prshma.h -prsystem.h -prthread.h -prtime.h -prtpool.h -prtrace.h -prtypes.h -prvrsion.h -prwin16.h -base64.h -blapit.h -cert.h -certdb.h -certt.h -ciferfam.h -cmmf.h -cmmft.h -cms.h -cmsreclist.h -cmst.h -crmf.h -crmft.h -cryptohi.h -cryptoht.h -ecl-exp.h -hasht.h -jar-ds.h -jar.h -jarfile.h -key.h -keyhi.h -keyt.h -keythi.h -nss.h -nssb64.h -nssb64t.h -nssbase.h -nssbaset.h -nssck.api -nssckbi.h -nssckepv.h -nssckft.h -nssckfw.h -nssckfwc.h -nssckfwt.h -nssckg.h -nssckmdt.h -nssckt.h -nssilckt.h -nssilock.h -nsslocks.h -nssrwlk.h -nssrwlkt.h -nssutil.h -ocsp.h -ocspt.h -p12.h -p12plcy.h -p12t.h -pk11func.h -pk11pqg.h -pk11priv.h -pk11pub.h -pk11sdr.h -pkcs11.h -pkcs11f.h -pkcs11n.h -pkcs11p.h -pkcs11t.h -pkcs11u.h -pkcs12.h -pkcs12t.h -pkcs7t.h -portreg.h -preenc.h -secasn1.h -secasn1t.h -seccomon.h -secder.h -secdert.h -secdig.h -secdigt.h -secerr.h -sechash.h -secitem.h -secmime.h -secmod.h -secmodt.h -secoid.h -secoidt.h -secpkcs5.h -secpkcs7.h -secport.h -shsign.h -smime.h -ssl.h -sslerr.h -sslproto.h -sslt.h -utilmodt.h -utilpars.h -utilparst.h -utilrename.h -A4Stuff.h -activscp.h -AEDataModel.h -AEObjects.h -AEPackObject.h -AERegistry.h -AEUtils.h -afxcmn.h -afxcoll.h -afxcview.h -afxdisp.h -afxdtctl.h -afxext.h -afxmt.h -afxpriv.h -afxtempl.h -afxwin.h -algorithm -Aliases.h -all.h -alloca.h -alloc.h -alsa/asoundlib.h -android/log.h -ansi_parms.h -a.out.h -app/Cursor.h -Appearance.h -AppFileInfo.h -AppKit.h -AppleEvents.h -Application.h -app/Message.h -app/MessageRunner.h -arpa/inet.h -arpa/nameser.h -asm/sigcontext.h -asm/signal.h -ASRegistry.h -assert.h -atk/atk.h -atlcom.h -atlconv.h -atlctl.cpp -atlctl.h -ATLCTL.H -atlhost.h -atlimpl.cpp -atlwin.cpp -ATSTypes.h -ATSUnicode.h -Balloons.h -base/pblock.h -base/PCR_Base.h -base/session.h -basetyps.h -be/app/Application.h -Beep.h -be/kernel/image.h -be/kernel/OS.h -bfd.h -Bitmap.h -bitset -blapi.h -bsd/libc.h -bsd/syscall.h -bstring.h -builtin.h -Button.h -byteswap.h -#if MOZ_TREE_CAIRO!=1 -#define WRAP_CAIRO_HEADERS -#endif -#ifdef WRAP_CAIRO_HEADERS -pixman.h -cairo.h -cairo-atsui.h -cairo-beos.h -cairo-ft.h -cairo-glitz.h -cairo-os2.h -cairo-pdf.h -cairo-ps.h -cairo-tee.h -cairo-quartz.h -cairo-win32.h -cairo-xlib.h -cairo-xlib-xrender.h -cairo-directfb.h -cairo-qpainter.h -#endif -dfiff.h -exception -ffi.h -fusion/reactor.h -fusion/property.h -fusion/conf.h -fusion/build.h -fusion/hash.h -fusion/shm/shm.h -fusion/shm/shm_internal.h -fusion/shm/pool.h -fusion/ref.h -fusion/fusion_internal.h -fusion/lock.h -fusion/types.h -fusion/vector.h -fusion/call.h -fusion/shmalloc.h -fusion/protocol.h -fusion/fusion.h -fusion/arena.h -fusion/object.h -dgiff.h -direct/util.h -direct/memcpy.h -direct/interface.h -direct/conf.h -direct/tree.h -direct/signals.h -direct/build.h -direct/interface_implementation.h -direct/utf8.h -direct/serial.h -direct/hash.h -direct/direct.h -direct/clock.h -direct/types.h -direct/mem.h -direct/thread.h -direct/debug.h -direct/stream.h -direct/messages.h -direct/trace.h -direct/modules.h -direct/log.h -direct/system.h -direct/list.h -dfb_types.h -directfb_strings.h -directfb_keyboard.h -callconv.h -Carbon/Carbon.h -CarbonEvents.h -Carbon.h -cassert -c_asm.h -cctype -cderr.h -cerrno -CFBase.h -CFBundle.h -CFData.h -CFDictionary.h -cf.h -CFNumber.h -CFPlugIn.h -CFPreferences.h -CFString.h -CFURL.h -CGAffineTransform.h -CheckBox.h -climits -Clipboard.h -cmplrs/stsupport.h -Cocoa/Cocoa.h -CodeFragments.h -comdef.h -commctrl.h -COMMCTRL.H -commdlg.h -compat.h -condapi.h -ConditionalMacros.h -config.h -conio.h -console.h -ControlDefinitions.h -Controls.h -CoreFoundation/CoreFoundation.h -CoreServices/CoreServices.h -CPalmRec.cpp -Cpalmrec.h -CPCatgry.cpp -CPDbBMgr.h -CPString.cpp -CPString.h -crtdbg.h -crt_externs.h -crypt.h -cstddef -cstdio -cstdlib -cstring -ctime -ctype.h -curl/curl.h -curl/easy.h -curses.h -cxxabi.h -DateTimeUtils.h -dbus/dbus.h -dbus/dbus-glib.h -dbus/dbus-glib-lowlevel.h -ddeml.h -Debug.h -deque -dem.h -descrip.h -Devices.h -Dialogs.h -direct.h -dirent.h -DiskInit.h -dlfcn.h -dlgs.h -dl.h -docobj.h -dos/dosextens.h -dos.h -Drag.h -DriverServices.h -DriverSynchronization.h -DropInPanel.h -dvidef.h -elf.h -endian.h -Entry.h -errno.h -Errors.h -Events.h -exdisp.h -ExDisp.h -exe386.h -execinfo.h -extras.h -fabdef.h -fcntl.h -features.h -fibdef.h -File.h -filehdr.h -files.h -Files.h -FindDirectory.h -Finder.h -FinderRegistry.h -FixMath.h -float.h -fnmatch.h -Folders.h -fontconfig/fontconfig.h -fontconfig/fcfreetype.h -Font.h -Fonts.h -fp.h -fpieee.h -frame/log.h -frame/req.h -freetype/freetype.h -freetype/ftcache.h -freetype/ftglyph.h -freetype/ftsynth.h -freetype/ftoutln.h -freetype/ttnameid.h -freetype/tttables.h -freetype/t1tables.h -freetype/ftlcdfil.h -freetype/ftsizes.h -freetype/ftadvanc.h -freetype/ftbitmap.h -freetype/ftxf86.h -freetype.h -ftcache.h -ftglyph.h -ftsynth.h -ftoutln.h -ttnameid.h -tttables.h -t1tables.h -ftlcdfil.h -ftsizes.h -ftadvanc.h -ftbitmap.h -ftxf86.h -fribidi/fribidi.h -FSp_fopen.h -fstream -fstream.h -ft2build.h -fts.h -gconf/gconf-client.h -Gdiplus.h -gdk/gdk.h -gdk/gdkkeysyms.h -gdk/gdkprivate.h -gdk/gdkx.h -gdk/gdkdirectfb.h -gdk-pixbuf/gdk-pixbuf.h -Gestalt.h -getopt.h -glibconfig.h -glib.h -glib-object.h -gmodule.h -gnome.h -gnu/libc-version.h -grp.h -gssapi_generic.h -gssapi/gssapi_generic.h -gssapi/gssapi.h -gssapi.h -gtk/gtk.h -gtk/gtkx.h -gtk/gtkprinter.h -gtk/gtkprintjob.h -gtk/gtkprintunixdialog.h -HIToolbox/HIToolbox.h -hlink.h -ia64/sys/inline.h -Icons.h -iconv.h -ieeefp.h -ifaddrs.h -image.h -imagehlp.h -imm.h -initguid.h -InterfaceDefs.h -InternetConfig.h -IntlResources.h -ints.h -intshcut.h -inttypes.h -iodef.h -io.h -IOKit/IOKitLib.h -IOKit/IOMessage.h -IOKit/pwr_mgt/IOPMLib.h -iomanip -ios -iosfwd -iostream -iostream.h -iterator -JavaControl.h -JavaEmbedding/JavaControl.h -JavaVM/jni.h -JManager.h -JNIEnvTests.h -jni.h -#if MOZ_NATIVE_JPEG==1 -jpeglib.h -#endif -JVMManagerTests.h -Kerberos/Kerberos.h -kernel/image.h -kernel/OS.h -LAction.h -langinfo.h -LApplication.h -LArray.h -LArrayIterator.h -LAttachable.h -LAttachment.h -LaunchServices.h -lber.h -LBroadcaster.h -LButton.h -lcache.h -LCaption.h -LCheckBox.h -LCicnButton.h -LClipboard.h -LCommander.h -LComparator.h -LControl.h -ldap.h -ldaplog.h -ldappr.h -ldap_ssl.h -LDataStream.h -ldfcn.h -LDialogBox.h -ldif.h -LDocApplication.h -LDocument.h -LDragAndDrop.h -LDragTask.h -LEditField.h -LEditText.h -LEventDispatcher.h -LFile.h -LFileStream.h -LFileTypeList.h -LFocusBox.h -LGrafPortView.h -LHandleStream.h -libc_r.h -libelf.h -libelf/libelf.h -libgen.h -libgnome/gnome-url.h -libgnome/libgnome.h -libgnomeui/gnome-icon-lookup.h -libgnomeui/gnome-icon-theme.h -libgnomeui/gnome-ui-init.h -libgnomevfs/gnome-vfs-file-info.h -libgnomevfs/gnome-vfs.h -libgnomevfs/gnome-vfs-init.h -libgnomevfs/gnome-vfs-mime.h -libgnomevfs/gnome-vfs-mime-handlers.h -libgnomevfs/gnome-vfs-mime-utils.h -libgnomevfs/gnome-vfs-ops.h -libgnomevfs/gnome-vfs-standard-callbacks.h -lib$routines.h -limits -limits.h -link.h -linux/kernel.h -linux/limits.h -linux/rtc.h -linux/version.h -list -List.h -Lists.h -LListBox.h -LListener.h -LMenuBar.h -LMenu.h -LModelDirector.h -LModelObject.h -LModelProperty.h -loader.h -locale -locale.h -LOffscreenView.h -logkeys.h -logstrng.h -Looper.h -LowMem.h -LPane.h -LPeriodical.h -LPicture.h -LPlaceHolder.h -LPrintout.h -LProgressBar.h -LPushButton.h -LRadioGroup.h -LRadioGroupView.h -LRunArray.h -LScroller.h -LSharable.h -LSingleDoc.h -LStaticText.h -LStdControl.h -LStream.h -LString.h -LTabGroup.h -LTabGroupView.h -LTableArrayStorage.h -LTableMonoGeometry.h -LTableSingleSelector.h -LTableView.h -LTextEditView.h -LTextTableView.h -LUndoer.h -LVariableArray.h -LView.h -LWindow.h -m68881.h -MacErrors.h -MacHeadersCarbon.h -machine/ansi.h -machine/builtins.h -machine/clock.h -machine/endian.h -machine/frame.h -machine/inline.h -machine/limits.h -machine/signal.h -machine/trap.h -mach/mach_host.h -mach/mach_init.h -mach/mach_interface.h -mach/mach_port.h -mach-o/dyld.h -MacLocales.h -MacMemory.h -MacTCP.h -MacTypes.h -MacWindows.h -malloc.h -malloc_np.h -map -mapicode.h -mapidefs.h -mapiguid.h -mapi.h -mapitags.h -mapiutil.h -mapix.h -Math64.h -math.h -mbstring.h -mem.h -memory -memory.h -Memory.h -MenuBar.h -Menu.h -Menus.h -Message.h -Mime.h -MixedMode.h -mlang.h -mmsystem.h -model.h -Movies.h -mpw/errno.h -mshtmhst.h -mshtml.h -mswsock.h -Multiprocessing.h -mutex.h -Navigation.h -ncompat.h -ncurses.h -netCore.h -netdb.h -net/if.h -netinet/in.h -netinet/in_systm.h -netinet/tcp.h -new -newexe.h -new.h -nl_types.h -NodeInfo.h -nsswitch.h -objbase.h -objidl.h -Objsafe.h -ojiapitests.h -ole2.h -oleidl.h -OpenGL/OpenGL.h -OpenTptInternet.h -OpenTransport.h -os2.h -OS.h -osreldate.h -ostream -OSUtils.h -Packages.h -Palettes.h -PALM_CMN.H -pango/pango-modules.h -pango/pangocairo.h -pango/pangofc-decoder.h -pango/pangofc-font.h -pango/pangofc-fontmap.h -pango/pango-break.h -pango/pango-fontmap.h -pango/pango.h -pango/pangoxft.h -pango/pango-utils.h -pascal.h -Patches.h -Path.h -pcfs/pc_dir.h -Pgenerr.h -PGenErr.h -Ph.h -PLStringFuncs.h -PMApplication.h -pmddim.h -poll.h -Polygon.h -portable.h -Power.h -PP_ClassHeaders.cp -PP_Constants.h -PPCToolbox.h -PP_DebugHeaders.cp -PP_KeyCodes.h -PP_Macros.h -PP_Messages.h -PP_Prefix.h -PP_Resources.h -PP_Types.h -Printing.h -Print/PMPrintingDialogExtensions.h -private/qucomextra_p.h -Processes.h -process.h -Process.h -proto/dos.h -proto/exec.h -psap.h -Pt.h -pthread.h -pthread_np.h -pulse/pulseaudio.h -pwd.h -Python.h -QDOffscreen.h -queue -Quickdraw.h -QuickDraw.h -QuickTimeComponents.h -quipu/attr.h -rasdlg.h -raserror.h -ras.h -regex.h -Region.h -resolv.h -Resources.h -Retrace.h -rld_interface.h -rmsdef.h -Roster.h -rpc.h -rpcproxy.h -rpc/types.h -sane/sane.h -sane/sanei.h -sane/saneopts.h -Scrap.h -Screen.h -Script.h -ScrollBar.h -sec.h -secrng.h -security.h -secutil.h -semaphore.h -servprov.h -set -setjmp.h -SFNTLayoutTypes.h -SFNTTypes.h -share.h -shellapi.h -shlguid.h -shlobj.h -sigcontext.h -signal.h -SimpleGameSound.h -SIOUX.h -size_t.h -sndio.h -someincludefile.h -Sound.h -soundcard.h -sqlite3.h -ssdef.h -sstream -stack -StandardFile.h -starlet.h -stat.h -statreg.cpp -statreg.h -stdarg.h -stdbool.h -stddef.h -stdint.h -stdio.h -stdlib.h -storage/FindDirectory.h -StorageKit.h -string -StringCompare.h -string.h -String.h -strings.h -Strings.h -StringView.h -stropts.h -strstrea.h -structs.h -stsdef.h -SupportDefs.h -support/String.h -support/SupportDefs.h -support/TLS.h -svrcore.h -symconst.h -sym.h -synch.h -syncmgr.h -sys/atomic_op.h -sys/bitypes.h -sys/byteorder.h -syscall.h -sys/cdefs.h -sys/cfgodm.h -sys/elf.h -sys/endian.h -sys/errno.h -sys/fault.h -sys/fcntl.h -sys/file.h -sys/filio.h -sys/frame.h -sys/immu.h -sys/inttypes.h -sys/ioccom.h -sys/ioctl.h -sys/ipc.h -sys/ldr.h -sys/link.h -sys/locking.h -syslog.h -sys/lwp.h -sys/machine.h -sys/mman.h -sys/mmu.h -sys/mount.h -sys/mpctl.h -sys/param.h -sys/pda.h -sys/poll.h -sys/ppc.h -sys/prctl.h -sys/priv.h -sys/procfs.h -sys/pstat.h -sys/ptrace.h -sys/queue.h -sys/quota.h -sys/reboot.h -sys/reg.h -sys/regset.h -sys/resource.h -sys/sched.h -sys/select.h -sys/sem.h -sys/sendfile.h -sys/shm.h -sys/siginfo.h -sys/signal.h -sys/socket.h -sys/sockio.h -sys/sparc/frame.h -sys/stack.h -sys/statfs.h -sys/stat.h -sys/statvfs.h -sys/syscall.h -sys/sysctl.h -sys/sysinfo.h -sys/sysmp.h -sys/syssgi.h -sys/system_properties.h -sys/systeminfo.h -sys/timeb.h -sys/time.h -sys/times.h -sys/ttycom.h -sys/types.h -sys/ucontext.h -sys/uio.h -sys/un.h -sys/unistd.h -sys/utsname.h -sys/vfs.h -sys/wait.h -tables.h -TArray.h -TArrayIterator.h -task.h -tchar.h -TCHAR.H -termios.h -TextCommon.h -TextEdit.h -TextEncodingConverter.h -TextServices.h -TextUtils.h -TextView.h -th/PCR_Th.h -thread.h -ThreadManagerTests.h -Threads.h -time.h -Timer.h -tlhelp32.h -ToolUtils.h -tr1/functional -trace.h -Traps.h -typeinfo -types.h -Types.h -UAppleEventsMgr.h -UAttachments.h -ucontext.h -uconv.h -UCursor.h -ucx$inetdef.h -UDebugging.h -UDesktop.h -UDrawingState.h -UDrawingUtils.h -UEnvironment.h -UEventMgr.h -UException.h -UExtractFromAEDesc.h -UGWorld.h -UKeyFilters.h -ulocks.h -ulserrno.h -UMemoryMgr.h -UModalDialogs.h -UNavServicesDialogs.h -UnicodeBlockObjects.h -UnicodeConverter.h -UnicodeUtilities.h -unidef.h -unikbd.h -unistd.h -unix.h -unixio.h -unixlib.h -unknwn.h -UPrinting.h -UQuickTime.h -UReanimator.h -URegions.h -URegistrar.h -UResourceMgr.h -utility -urlhist.h -urlmon.h -UScrap.h -UScreenPort.h -UTCUtils.h -UTETextAction.h -UTEViewTextAction.h -UTextEdit.h -UTextTraits.h -utility -utime.h -UWindows.h -values.h -varargs.h -vcclr.h -vector -View.h -Volume.h -wab.h -wait.h -wchar.h -wctype.h -winbase.h -win/compobj.h -windef.h -Window.h -windows.h -Windows.h -windowsx.h -Wininet.h -winnls.h -winperf.h -winreg.h -Winreg.h -winsock2.h -winsock.h -winspool.h -winsvc.h -winuser.h -winver.h -wmem.h -workbench/startup.h -wtypes.h -wx/image.h -wx/listctrl.h -wx/log.h -wx/toolbar.h -wx/wx.h -wx/xrc/xmlres.h -X11/cursorfont.h -X11/extensions/Print.h -X11/extensions/shape.h -X11/extensions/scrnsaver.h -X11/extensions/XShm.h -X11/extensions/Xrender.h -X11/extensions/Xdamage.h -X11/extensions/Xcomposite.h -X11/Intrinsic.h -X11/keysymdef.h -X11/keysym.h -X11/Shell.h -X11/StringDefs.h -X11/Xatom.h -X11/Xft/Xft.h -X11/Xfuncproto.h -X11/X.h -X11/XKBlib.h -X11/Xlib.h -X11/Xlibint.h -X11/Xlocale.h -X11/Xos.h -X11/Xutil.h -xpt_struct.h -xpt_xdr.h -zmouse.h -speex/speex_resampler.h -soundtouch/SoundTouch.h -#if MOZ_NATIVE_PNG==1 -png.h -#endif -#if MOZ_NATIVE_ZLIB==1 -zlib.h -#endif -#ifdef MOZ_ENABLE_STARTUP_NOTIFICATION -libsn/sn.h -libsn/sn-common.h -libsn/sn-launchee.h -libsn/sn-launcher.h -libsn/sn-monitor.h -libsn/sn-util.h -#endif -#if MOZ_NATIVE_HUNSPELL==1 -hunspell.hxx -#endif -#if MOZ_NATIVE_BZ2==1 -bzlib.h -#endif -#ifdef MOZ_ENABLE_GIO -gio/gio.h -#endif -#if MOZ_NATIVE_LIBEVENT==1 -event.h -#else -sys/event.h -#endif -#ifdef MOZ_ENABLE_LIBPROXY -proxy.h -#endif -#ifdef MOZ_ENABLE_CONTENTMANAGER -SelectSingleContentItemPage.h -SelectMultipleContentItemsPage.h -QtSparql/qsparqlconnection.h -QtSparql/qsparqlquery.h -QtSparql/qsparqlresult.h -#endif - -#if MOZ_TREE_PIXMAN!=1 -pixman.h -#endif -#if MOZ_ENABLE_MEEGOTOUCHSHARE -shareuiinterface.h -#endif -#if MOZ_NATIVE_LIBVPX==1 -vpx/vpx_codec.h -vpx/vpx_decoder.h -vpx/vpx_encoder.h -vpx/vp8cx.h -vpx/vp8dx.h -#endif -#ifdef GKMEDIAS_SHARED_LIBRARY -vpx/vpx_codec.h -vpx/vpx_decoder.h -vpx/vpx_encoder.h -vpx/vp8cx.h -vpx/vp8dx.h -vorbis/codec.h -theora/theoradec.h -tremor/ivorbiscodec.h -ogg/ogg.h -ogg/os_types.h -nestegg/nestegg.h -cubeb/cubeb.h -#endif -gst/gst.h -gst/app/gstappsink.h -gst/app/gstappsrc.h -gst/video/video.h -sys/msg.h -sys/ipc.h -sys/thr.h -sys/user.h -kvm.h -spawn.h -err.h -xlocale.h -#ifdef MOZ_SHARED_ICU -unicode/locid.h -unicode/numsys.h -unicode/ucal.h -unicode/uclean.h -unicode/ucol.h -unicode/udat.h -unicode/udatpg.h -unicode/uenum.h -unicode/unum.h -unicode/ustring.h -unicode/utypes.h -#endif -libutil.h diff --git a/js/src/config/version.mk b/js/src/config/version.mk deleted file mode 100644 index 414a1ebb456..00000000000 --- a/js/src/config/version.mk +++ /dev/null @@ -1,51 +0,0 @@ -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -ifndef INCLUDED_VERSION_MK -INCLUDED_VERSION_MK=1 - -# Windows gmake build: -# Build default .rc file if $(RESFILE) isn't defined. -# TODO: -# PBI : Private build info. Not used currently. -# Guessing the best way would be to set an env var. -# BINARY : Binary name. Not used currently. -ifeq ($(MOZ_WIDGET_TOOLKIT),windows) -ifndef RESFILE -RCFILE=./module.rc -RESFILE=./module.res -_RC_STRING = -QUIET 1 -DEPTH $(DEPTH) -TOPSRCDIR $(topsrcdir) -OBJDIR . -SRCDIR $(srcdir) -DISPNAME $(MOZ_APP_DISPLAYNAME) -APPVERSION $(MOZ_APP_VERSION) -ifdef MOZILLA_OFFICIAL -_RC_STRING += -OFFICIAL 1 -endif -ifdef MOZ_DEBUG -_RC_STRING += -DEBUG 1 -endif -ifdef PROGRAM -_RC_STRING += -BINARY $(PROGRAM) -else -ifdef _PROGRAM -_RC_STRING += -BINARY $(_PROGRAM) -else -ifdef SHARED_LIBRARY -_RC_STRING += -BINARY $(SHARED_LIBRARY) -endif -endif -endif -ifdef RCINCLUDE -_RC_STRING += -RCINCLUDE $(srcdir)/$(RCINCLUDE) -endif - -GARBAGE += $(RESFILE) $(RCFILE) - -#dummy target so $(RCFILE) doesn't become the default =P -all:: - -$(RCFILE): $(RCINCLUDE) $(topsrcdir)/config/version_win.pl - $(PERL) $(topsrcdir)/config/version_win.pl $(_RC_STRING) - -endif # RESFILE -endif # Windows - -endif diff --git a/js/src/config/version_win.pl b/js/src/config/version_win.pl deleted file mode 100755 index d28c00ba3d6..00000000000 --- a/js/src/config/version_win.pl +++ /dev/null @@ -1,374 +0,0 @@ -#!/usr/bin/perl -w - -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. - -#use diagnostics; -require strict; -my $dir = $0; -$dir =~ s/[^\/]*$//; -push(@INC, "$dir"); -require "Moz/Milestone.pm"; -use Getopt::Long; -use Getopt::Std; -use POSIX; - -# Calculate the number of days since Jan. 1, 2000 from a buildid string -sub daysFromBuildID -{ - my ($buildid,) = @_; - - my ($y, $m, $d, $h) = ($buildid =~ /^(\d{4})(\d{2})(\d{2})(\d{2})(\d{2})(\d{2})$/); - $d || die("Unrecognized buildid string."); - - my $secondstodays = 60 * 60 * 24; - return sprintf("%d", - (POSIX::mktime(00, 00, 00, $d, $m - 1, $y - 1900) - - POSIX::mktime(00, 00, 00, 01, 00, 100)) / $secondstodays); -} - -#Creates version resource file - -#Paramaters are passed on the command line: - -#Example: -MODNAME nsToolkitCompsModule -DEBUG=1 - -# DEBUG - Mozilla's global debug variable - tells if its debug version -# OFFICIAL - tells Mozilla is building a milestone or nightly -# MSTONE - tells which milestone is being built; -# OBJDIR - Holds the object directory; -# MODNAME - tells what the name of the module is like nsBMPModule -# DEPTH - Holds the path to the root obj dir -# TOPSRCDIR - Holds the path to the root mozilla dir -# SRCDIR - Holds module.ver and source -# BINARY - Holds the name of the binary file -# DISPNAME - Holds the display name of the built application -# APPVERSION - Holds the version string of the built application -# RCINCLUDE - Holds the name of the RC File to include or "" -# QUIET - Turns off output - -#Description and Comment come from module.ver -#Bug 23560 -#http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winui/rc_7x2d.asp - -#Get next .ver file entry -sub getNextEntry -{ - while () - { - my $mline = $_; - ($mline) = split(/#/,$mline); - my ($entry, $value)=split(/=/,$mline,2); - if (defined($entry)) - { - if (defined($value)) - { - $entry =~ s/^\s*(.*?)\s*$/$1/; - $value =~ s/^\s*(.*?)\s*$/$1/; - return ($entry,$value); - } - } - } - return undef; -} - -my ($quiet,$objdir,$debug,$official,$milestone,$buildid,$module,$binary,$depth,$rcinclude,$srcdir,$fileversion,$productversion); - -GetOptions( "QUIET" => \$quiet, - "DEBUG=s" => \$debug, - "OFFICIAL=s" => \$official, - "MSTONE=s" => \$milestone, - "MODNAME=s" => \$module, - "BINARY=s" => \$binary, - "DISPNAME=s" => \$displayname, - "APPVERSION=s" => \$appversion, - "SRCDIR=s" => \$srcdir, - "TOPSRCDIR=s" => \$topsrcdir, - "DEPTH=s" => \$depth, - "RCINCLUDE=s" => \$rcinclude, - "OBJDIR=s" => \$objdir); -if (!defined($debug)) {$debug="";} -if (!defined($official)) {$official="";} -if (!defined($milestone)) {$milestone="";} -if (!defined($module)) {$module="";} -if (!defined($binary)) {$binary="";} -if (!defined($displayname)) {$displayname="Mozilla";} -if (!defined($appversion)) {$appversion=$milestone;} -if (!defined($depth)) {$depth=".";} -if (!defined($rcinclude)) {$rcinclude="";} -if (!defined($objdir)) {$objdir=".";} -if (!defined($srcdir)) {$srcdir=".";} -if (!defined($topsrcdir)) {$topsrcdir=".";} -my $mfversion = "Personal"; -my $mpversion = "Personal"; -my @fileflags = ("0"); -my $comment=""; -my $description=""; -if (!defined($module)) -{ - $module = $binary; - ($module) = split(/\./,$module); -} - -my $bufferstr=" "; - -my $MILESTONE_FILE = "$topsrcdir/config/milestone.txt"; -my $BUILDID_FILE = "$depth/config/buildid"; - -#Read module.ver file -#Version file overrides for WIN32: -#WIN32_MODULE_COMMENT -#WIN32_MODULE_DESCRIPTION -#WIN32_MODULE_FILEVERSION -#WIN32_MODULE_COMPANYNAME -#WIN32_MODULE_FILEVERSION_STRING -#WIN32_MODULE_NAME -#WIN32_MODULE_COPYRIGHT -#WIN32_MODULE_TRADEMARKS -#WIN32_MODULE_ORIGINAL_FILENAME -#WIN32_MODULE_PRODUCTNAME -#WIN32_MODULE_PRODUCTVERSION -#WIN32_MODULE_PRODUCTVERSION_STRING - -#Override values obtained from the .ver file -my $override_comment; -my $override_description; -my $override_fileversion; -my $override_company; -my $override_mfversion; -my $override_module; -my $override_copyright; -my $override_trademarks; -my $override_filename; -my $override_productname; -my $override_productversion; -my $override_mpversion; -if (open(VERFILE, "<$srcdir/module.ver")) -{ - - my ($a,$b) = getNextEntry(); - while (defined($a)) - { - if ($a eq "WIN32_MODULE_COMMENT") { $override_comment = $b; } - if ($a eq "WIN32_MODULE_DESCRIPTION") { $override_description = $b; } - if ($a eq "WIN32_MODULE_FILEVERSION") { $override_fileversion = $b; } - if ($a eq "WIN32_MODULE_COMPANYNAME") { $override_company = $b; } - if ($a eq "WIN32_MODULE_FILEVERSION_STRING") { $override_mfversion = $b; } - if ($a eq "WIN32_MODULE_NAME") { $override_module = $b; } - if ($a eq "WIN32_MODULE_COPYRIGHT") { $override_copyright = $b; } - if ($a eq "WIN32_MODULE_TRADEMARKS") { $override_trademarks = $b; } - if ($a eq "WIN32_MODULE_ORIGINAL_FILENAME") { $override_filename = $b; } - if ($a eq "WIN32_MODULE_PRODUCTNAME") { $override_productname = $b; } - if ($a eq "WIN32_MODULE_PRODUCTVERSION") { $override_productversion = $b; } - if ($a eq "WIN32_MODULE_PRODUCTVERSION_STRING") { $override_mpversion = $b; } - ($a,$b) = getNextEntry(); - } - close(VERFILE) -} -else -{ - if (!$quiet || $quiet ne "1") { print "$bufferstr" . "WARNING: No module.ver file included ($module, $binary). Default values used\n"; } -} -#Get rid of trailing and leading whitespace -$debug =~ s/^\s*(.*)\s*$/$1/; -$comment =~ s/^\s*(.*)\s*$/$1/; -$official =~ s/^\s*(.*)\s*$/$1/; -$milestone =~ s/^\s*(.*)\s*$/$1/; -$description =~ s/^\s*(.*)\s*$/$1/; -$module =~ s/^\s*(.*)\s*$/$1/; -$depth =~ s/^\s*(.*)\s*$/$1/; -$binary =~ s/^\s*(.*)\s*$/$1/; -$displayname =~ s/^\s*(.*)\s*$/$1/; - -open(BUILDID, "<", $BUILDID_FILE) || die("Couldn't open buildid file: $BUILDID_FILE"); -$buildid = ; -$buildid =~ s/\s*$//; -close BUILDID; - -my $daycount = daysFromBuildID($buildid); - -if ($milestone eq "") { - $milestone = Moz::Milestone::getOfficialMilestone($MILESTONE_FILE); -} - -$mfversion = $mpversion = $milestone; -if ($appversion eq "") { - $appversion = $milestone; -} - -if ($debug eq "1") -{ - push @fileflags, "VS_FF_DEBUG"; - $mpversion .= " Debug"; - $mfversion .= " Debug"; -} - -if ($official ne "1") { - push @fileflags, "VS_FF_PRIVATEBUILD"; -} - -if ($milestone =~ /[a-z]/) { - push @fileflags, "VS_FF_PRERELEASE"; -} - -my @mstone = split(/\./,$milestone); -$mstone[1] =~s/\D.*$//; -if (!$mstone[2]) { - $mstone[2] = "0"; -} -else { - $mstone[2] =~s/\D.*$//; -} -$fileversion = $productversion="$mstone[0],$mstone[1],$mstone[2],$daycount"; - -my @appver = split(/\./,$appversion); -for ($j = 1; $j < 4; $j++) -{ - if (!$appver[$j]) { - $appver[$j] = "0"; - } - else { - $appver[$j] =~s/\D.*$//; - } -} -my $winappversion = "$appver[0],$appver[1],$appver[2],$appver[3]"; - -my $copyright = "License: MPL 2"; -my $company = "Mozilla Foundation"; -my $trademarks = "Mozilla"; -my $productname = $displayname; - - -if (defined($override_comment)){$override_comment =~ s/\@MOZ_APP_DISPLAYNAME\@/$displayname/g; $comment=$override_comment;} -if (defined($override_description)){$override_description =~ s/\@MOZ_APP_DISPLAYNAME\@/$displayname/g; $description=$override_description;} -if (defined($override_fileversion)){$override_fileversion =~ s/\@MOZ_APP_WINVERSION\@/$winappversion/g; $fileversion=$override_fileversion;} -if (defined($override_mfversion)){$override_mfversion =~ s/\@MOZ_APP_VERSION\@/$appversion/g; $mfversion=$override_mfversion;} -if (defined($override_company)){$company=$override_company;} -if (defined($override_module)){$override_module =~ s/\@MOZ_APP_DISPLAYNAME\@/$displayname/g; $module=$override_module;} -if (defined($override_copyright)){$override_copyright =~ s/\@MOZ_APP_DISPLAYNAME\@/$displayname/g; $copyright=$override_copyright;} -if (defined($override_trademarks)){$override_trademarks =~ s/\@MOZ_APP_DISPLAYNAME\@/$displayname/g; $trademarks=$override_trademarks;} -if (defined($override_filename)){$binary=$override_filename;} -if (defined($override_productname)){$override_productname =~ s/\@MOZ_APP_DISPLAYNAME\@/$displayname/g; $productname=$override_productname;} -if (defined($override_productversion)){$override_productversion =~ s/\@MOZ_APP_WINVERSION\@/$winappversion/g; $productversion=$override_productversion;} -if (defined($override_mpversion)){$override_mpversion =~ s/\@MOZ_APP_VERSION\@/$appversion/g; $mpversion=$override_mpversion;} - - -#Override section - -open(RCFILE, ">$objdir/module.rc") || die("Can't edit module.rc - It must be locked.\n"); -print RCFILE qq{ -// This Source Code Form is subject to the terms of the Mozilla Public -// License, v. 2.0. If a copy of the MPL was not distributed with this -// file, You can obtain one at http://mozilla.org/MPL/2.0/. - -#include - -// Note: if you contain versioning information in an included -// RC script, it will be discarded -// Use module.ver to explicitly set these values - -// Do not edit this file. Changes won't affect the build. - -}; - -my $versionlevel=0; -my $insideversion=0; -if (open(RCINCLUDE, "<$rcinclude")) -{ - print RCFILE "// From included resource $rcinclude\n"; -# my $mstring=""; - while () - { - $_ =~ s/\@MOZ_APP_DISPLAYNAME\@/$displayname/g; - print RCFILE $_; -# my $instr=$_; -# chomp($instr); -# $mstring .= "$instr\;"; - } - close(RCINCLUDE); -# $mstring =~ s/\/\*.*\*\///g; -# my @mlines = split(/\;/,$mstring); -# for(@mlines) -# { -# my ($nocomment)=split(/\/\//,$_); -# if (defined($nocomment) && $nocomment ne "") -# { -# my ($firststring,$secondstring) = split(/\s+/,$nocomment); -# if (!defined($firststring)) {$firststring="";} -# if (!defined($secondstring)) {$secondstring="";} -# if ($secondstring eq "VERSIONINFO") -# { -#if (!$quiet || $quiet ne "1") { -# print "$bufferstr" . "WARNING: Included RC file ($rcinclude, $module, $binary)\n"; -# print "$bufferstr" . "WARNING: contains versioning information that will be discarded\n"; -# print "$bufferstr" . "WARNING: Remove it and use relevant overrides (in module.ver)\n"; -#} -# $versionlevel = 0; -# $insideversion = 1; -# } -# if ($firststring eq "BEGIN") { $versionlevel++; } -# if ($secondstring eq "END") -# { -# $versionlevel--; -# if ($insideversion==1 && $versionlevel==0) {$versionlevel=0;} -# } -# my $includecheck = $firststring . $secondstring; -# $includecheck =~ s/<|>/"/g; -# $includecheck = lc($includecheck); -# if ($includecheck ne "#include\"winver.h\"") -# { -# if ($insideversion == 0 && $versionlevel == 0) -# { -# print RCFILE "$nocomment\n"; -# } -# } -# } -# } - -} - -my $fileflags = join(' | ', @fileflags); - -print RCFILE qq{ - - -///////////////////////////////////////////////////////////////////////////// -// -// Version -// - -1 VERSIONINFO - FILEVERSION $fileversion - PRODUCTVERSION $productversion - FILEFLAGSMASK 0x3fL - FILEFLAGS $fileflags - FILEOS VOS__WINDOWS32 - FILETYPE VFT_DLL - FILESUBTYPE 0x0L -BEGIN - BLOCK "StringFileInfo" - BEGIN - BLOCK "000004b0" - BEGIN - VALUE "Comments", "$comment" - VALUE "LegalCopyright", "$copyright" - VALUE "CompanyName", "$company" - VALUE "FileDescription", "$description" - VALUE "FileVersion", "$mfversion" - VALUE "ProductVersion", "$mpversion" - VALUE "InternalName", "$module" - VALUE "LegalTrademarks", "$trademarks" - VALUE "OriginalFilename", "$binary" - VALUE "ProductName", "$productname" - VALUE "BuildID", "$buildid" - END - END - BLOCK "VarFileInfo" - BEGIN - VALUE "Translation", 0x0, 1200 - END -END - -}; -close(RCFILE); diff --git a/js/src/configure.in b/js/src/configure.in index ba0d2a74732..90f34a78898 100644 --- a/js/src/configure.in +++ b/js/src/configure.in @@ -8,8 +8,8 @@ dnl Process this file with autoconf to produce a configure script. dnl ======================================================== AC_PREREQ(2.13) -AC_INIT(jsapi.h) -AC_CONFIG_AUX_DIR(${srcdir}/../../build/autoconf) +AC_INIT(js/src/jsapi.h) +AC_CONFIG_AUX_DIR(${srcdir}/build/autoconf) AC_CANONICAL_SYSTEM TARGET_CPU="${target_cpu}" TARGET_VENDOR="${target_vendor}" @@ -73,7 +73,7 @@ _PTHREAD_LDFLAGS="" dnl Do not allow a separate objdir build if a srcdir build exists. dnl ============================================================== -_topsrcdir=`cd \`dirname $0\`; pwd` +_topsrcdir=`cd $srcdir; pwd` _objdir=`pwd` if test "$_topsrcdir" != "$_objdir" @@ -165,6 +165,8 @@ else AC_DEFINE(JS_STANDALONE) fi AC_SUBST(JS_STANDALONE) +BUILDING_JS=1 +AC_SUBST(BUILDING_JS) MOZ_ARG_WITH_STRING(gonk, [ --with-gonk=DIR @@ -1157,7 +1159,7 @@ if test "$GNU_CC"; then esac fi - _DEFINES_CFLAGS='-include $(DEPTH)/js-confdefs.h -DMOZILLA_CLIENT' + _DEFINES_CFLAGS='-include $(DEPTH)/js/src/js-confdefs.h -DMOZILLA_CLIENT' _USE_CPP_INCLUDE_FLAG=1 elif test "$SOLARIS_SUNPRO_CC"; then @@ -1219,7 +1221,7 @@ if test "$GNU_CXX"; then esac fi - _DEFINES_CXXFLAGS='-DMOZILLA_CLIENT -include $(DEPTH)/js-confdefs.h' + _DEFINES_CXXFLAGS='-DMOZILLA_CLIENT -include $(DEPTH)/js/src/js-confdefs.h' _USE_CPP_INCLUDE_FLAG=1 # Recent clang and gcc support C++11 deleted functions without warnings if @@ -1639,8 +1641,8 @@ ia64*-hpux*) MKSHLIB_UNFORCE_ALL= DSO_LDOPTS=-SUBSYSTEM:WINDOWS _USE_CPP_INCLUDE_FLAG=1 - _DEFINES_CFLAGS='-FI $(DEPTH)/js-confdefs.h -DMOZILLA_CLIENT' - _DEFINES_CXXFLAGS='-FI $(DEPTH)/js-confdefs.h -DMOZILLA_CLIENT' + _DEFINES_CFLAGS='-FI $(DEPTH)/js/src/js-confdefs.h -DMOZILLA_CLIENT' + _DEFINES_CXXFLAGS='-FI $(DEPTH)/js/src/js-confdefs.h -DMOZILLA_CLIENT' CFLAGS="$CFLAGS -W3 -Gy -Fd\$(COMPILE_PDBFILE)" CXXFLAGS="$CXXFLAGS -W3 -Gy -Fd\$(COMPILE_PDBFILE)" if test "$_CC_SUITE" -ge "12"; then @@ -2252,7 +2254,7 @@ EOF ]) if test "$ac_cv_have_visibility_builtin_bug" = "no" -a \ "$ac_cv_have_visibility_class_bug" = "no"; then - VISIBILITY_FLAGS='-I$(DIST)/system_wrappers_js -include $(topsrcdir)/config/gcc_hidden.h' + VISIBILITY_FLAGS='-I$(DIST)/system_wrappers -include $(topsrcdir)/config/gcc_hidden.h' WRAP_SYSTEM_INCLUDES=1 else VISIBILITY_FLAGS='-fvisibility=hidden' @@ -3866,7 +3868,7 @@ if test -z "$SKIP_LIBRARY_CHECKS" -a -z "$NO_EDITLINE"; then else dnl By default, we use editline JS_NATIVE_EDITLINE=1 - EDITLINE_LIBS='$(DEPTH)/editline/$(LIB_PREFIX)editline.$(LIB_SUFFIX)' + EDITLINE_LIBS='$(DEPTH)/js/src/editline/$(LIB_PREFIX)editline.$(LIB_SUFFIX)' fi dnl Either way, we want to build with line editing support. @@ -4277,7 +4279,7 @@ if test -n "$ENABLE_INTL_API" -a -z "$MOZ_NATIVE_ICU"; then ICU_CROSS_BUILD_OPT="" ICU_SRCDIR="" if test "$HOST_OS_ARCH" = "WINNT"; then - ICU_SRCDIR="--srcdir=$(cd $srcdir/../../intl/icu/source; pwd -W)" + ICU_SRCDIR="--srcdir=$(cd $srcdir/intl/icu/source; pwd -W)" fi if test "$CROSS_COMPILE"; then @@ -4326,7 +4328,7 @@ if test -n "$ENABLE_INTL_API" -a -z "$MOZ_NATIVE_ICU"; then CPPFLAGS="$ICU_CPPFLAGS" \ CXXFLAGS="$HOST_ICU_CXXFLAGS $HOST_OPTIMIZE_FLAGS" \ LDFLAGS="$HOST_LDFLAGS" \ - $SHELL $abs_srcdir/../../intl/icu/source/runConfigureICU \ + $SHELL $abs_srcdir/intl/icu/source/runConfigureICU \ $HOST_ICU_BUILD_OPTS \ $ICU_TARGET \ dnl Shell quoting is fun. @@ -4436,7 +4438,7 @@ if test -n "$ENABLE_INTL_API" -a -z "$MOZ_NATIVE_ICU"; then CFLAGS="$ICU_CFLAGS" \ CXXFLAGS="$ICU_CXXFLAGS" \ LDFLAGS="$ICU_LDFLAGS $LDFLAGS" \ - $SHELL $_topsrcdir/../../intl/icu/source/configure \ + $SHELL $_topsrcdir/intl/icu/source/configure \ $ICU_BUILD_OPTS \ $ICU_CROSS_BUILD_OPT \ $ICU_LINK_OPTS \ @@ -4468,7 +4470,7 @@ AC_OUTPUT() # Produce the js-config script at configure time; see the comments for # 'js*-config' in Makefile.in. AC_MSG_RESULT(invoking $MAKE to create $JS_CONFIG_NAME script) -$MAKE $JS_CONFIG_NAME +$MAKE -C js/src $JS_CONFIG_NAME # Build jsctypes if it's enabled. if test "$JS_HAS_CTYPES" -a -z "$MOZ_NATIVE_FFI"; then @@ -4494,10 +4496,10 @@ if test "$JS_HAS_CTYPES" -a -z "$MOZ_NATIVE_FFI"; then case "${target_cpu}" in x86_64) # Need target since MSYS tools into mozilla-build may be 32bit - ac_configure_args="$ac_configure_args CC=\"$_topsrcdir/ctypes/libffi/msvcc.sh -m64\" --build=$build --host=$target" + ac_configure_args="$ac_configure_args CC=\"$_topsrcdir/js/src/ctypes/libffi/msvcc.sh -m64\" --build=$build --host=$target" ;; *) - ac_configure_args="$ac_configure_args CC=$_topsrcdir/ctypes/libffi/msvcc.sh" + ac_configure_args="$ac_configure_args CC=$_topsrcdir/js/src/ctypes/libffi/msvcc.sh" ;; esac fi @@ -4523,12 +4525,12 @@ if test "$JS_HAS_CTYPES" -a -z "$MOZ_NATIVE_FFI"; then # Use a separate cache file for libffi, since it does things differently # from our configure. - mkdir -p $_objdir/ctypes/libffi + mkdir -p $_objdir/js/src/ctypes/libffi old_cache_file=$cache_file - cache_file=$_objdir/ctypes/libffi/config.cache + cache_file=$_objdir/js/src/ctypes/libffi/config.cache old_config_files=$CONFIG_FILES unset CONFIG_FILES - AC_OUTPUT_SUBDIRS(ctypes/libffi) + AC_OUTPUT_SUBDIRS(js/src/ctypes/libffi) cache_file=$old_cache_file ac_configure_args="$_SUBDIR_CONFIG_ARGS" CONFIG_FILES=$old_config_files diff --git a/js/src/gdb/Makefile.in b/js/src/gdb/Makefile.in index 86a15f5d9f9..dcde600909a 100644 --- a/js/src/gdb/Makefile.in +++ b/js/src/gdb/Makefile.in @@ -4,9 +4,9 @@ # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. -LIBS = $(DEPTH)/$(LIB_PREFIX)js_static.$(LIB_SUFFIX) $(NSPR_LIBS) $(MOZ_ZLIB_LIBS) +LIBS = ../$(LIB_PREFIX)js_static.$(LIB_SUFFIX) $(NSPR_LIBS) $(MOZ_ZLIB_LIBS) -LOCAL_INCLUDES += -I$(topsrcdir) -I.. +LOCAL_INCLUDES += -I$(srcdir)/.. -I.. ifdef MOZ_SHARED_ICU EXTRA_LIBS += $(MOZ_ICU_LIBS) @@ -18,7 +18,7 @@ EXTRA_LIBS += $(MOZ_FFI_LIBS) # in the build directory and in the dist/bin directory. PP_TARGETS += GDB_AUTOLOAD GDB_AUTOLOAD := gdb-tests-gdb.py.in -GDB_AUTOLOAD_FLAGS := -Dtopsrcdir=$(abspath $(topsrcdir)) +GDB_AUTOLOAD_FLAGS := -Dtopsrcdir=$(abspath $(srcdir)/..) INSTALL_TARGETS += GDB_INSTALL_AUTOLOAD GDB_INSTALL_AUTOLOAD_FILES := $(CURDIR)/gdb-tests-gdb.py diff --git a/js/src/jsapi-tests/Makefile.in b/js/src/jsapi-tests/Makefile.in index d6b8dfefa65..31d9720ad15 100644 --- a/js/src/jsapi-tests/Makefile.in +++ b/js/src/jsapi-tests/Makefile.in @@ -4,9 +4,9 @@ # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. -LIBS = $(DEPTH)/$(LIB_PREFIX)js_static.$(LIB_SUFFIX) $(NSPR_LIBS) $(MOZ_ZLIB_LIBS) +LIBS = ../$(LIB_PREFIX)js_static.$(LIB_SUFFIX) $(NSPR_LIBS) $(MOZ_ZLIB_LIBS) -LOCAL_INCLUDES += -I$(topsrcdir) -I.. +LOCAL_INCLUDES += -I$(srcdir)/.. -I.. ifdef MOZ_SHARED_ICU EXTRA_LIBS += $(MOZ_ICU_LIBS) @@ -22,7 +22,7 @@ endif # the build directory. PP_TARGETS += JSAPI_TESTS_AUTOLOAD JSAPI_TESTS_AUTOLOAD := jsapi-tests-gdb.py.in -JSAPI_TESTS_AUTOLOAD_FLAGS := -Dtopsrcdir=$(abspath $(topsrcdir)) +JSAPI_TESTS_AUTOLOAD_FLAGS := -Dtopsrcdir=$(abspath $(srcdir)/..) include $(topsrcdir)/config/rules.mk diff --git a/js/src/make-source-package.sh b/js/src/make-source-package.sh index 4d7152b4377..b5cb9f56cd4 100755 --- a/js/src/make-source-package.sh +++ b/js/src/make-source-package.sh @@ -39,9 +39,17 @@ case $cmd in ${MKDIR} -p ${tgtpath}/intl cp -t ${tgtpath}/intl -dRp ${SRCDIR}/../../intl/icu - # copy autoconf config directory. + # copy main moz.build and Makefile.in + cp -t ${tgtpath} -dRp ${SRCDIR}/../../Makefile.in ${SRCDIR}/../../moz.build + + # copy a nspr file used by the build system + ${MKDIR} -p ${tgtpath}/nsprpub/config + cp -t ${tgtpath}/nsprpub/config -dRp \ + ${SRCDIR}/../../nsprpub/config/make-system-wrappers.pl + + # copy build and config directory. ${MKDIR} -p ${tgtpath}/build - cp -t ${tgtpath}/build -dRp ${SRCDIR}/../../build/autoconf + cp -t ${tgtpath} -dRp ${SRCDIR}/../../build ${SRCDIR}/../../config # put in js itself cp -t ${tgtpath} -dRp ${SRCDIR}/../../mfbt @@ -54,32 +62,17 @@ case $cmd in ${MAKE} -C ${tgtpath}/js/src distclean fi - # put in the virtualenv and supporting files if it doesnt already exist - if [ ! -e ${SRCDIR}/build/virtualenv_packages.txt ]; then - cp -t ${tgtpath}/js/src/build -dRp \ - ${SRCDIR}/../../build/virtualenv_packages.txt \ - ${SRCDIR}/../../build/buildconfig.py - fi - if [ ! -e ${SRCDIR}/python ]; then - cp -t ${tgtpath}/js/src -dRp \ - ${SRCDIR}/../../python - fi - if [ ! -e ${SRCDIR}/dom/bindings/mozwebidlcodegen ]; then - ${MKDIR} -p ${tgtpath}/js/src/dom/bindings - cp -t ${tgtpath}/js/src/dom/bindings -dRp \ - ${SRCDIR}/../../dom/bindings/mozwebidlcodegen - fi - if [ ! -e ${SRCDIR}/media/webrtc/trunk/tools/gyp ]; then - ${MKDIR} -p ${tgtpath}/js/src/media/webrtc/trunk/tools - cp -t ${tgtpath}/js/src/media/webrtc/trunk/tools -dRp \ - ${SRCDIR}/../../media/webrtc/trunk/tools/gyp - fi - if [ ! -e ${SRCDIR}/testing ]; then - ${MKDIR} -p ${tgtpath}/js/src/testing - cp -t ${tgtpath}/js/src/testing -dRp \ - ${SRCDIR}/../../testing/mozbase - fi - # end of virtualenv injection + cp -t ${tgtpath} -dRp \ + ${SRCDIR}/../../python + ${MKDIR} -p ${tgtpath}/dom/bindings + cp -t ${tgtpath}/dom/bindings -dRp \ + ${SRCDIR}/../../dom/bindings/mozwebidlcodegen + ${MKDIR} -p ${tgtpath}/media/webrtc/trunk/tools + cp -t ${tgtpath}/media/webrtc/trunk/tools -dRp \ + ${SRCDIR}/../../media/webrtc/trunk/tools/gyp + ${MKDIR} -p ${tgtpath}/testing + cp -t ${tgtpath}/testing -dRp \ + ${SRCDIR}/../../testing/mozbase # remove *.pyc and *.pyo files if any find ${tgtpath} -type f -name "*.pyc" -o -name "*.pyo" |xargs rm -f diff --git a/js/src/moz.build b/js/src/moz.build index 8c20db5dc8e..a9075e07602 100644 --- a/js/src/moz.build +++ b/js/src/moz.build @@ -4,8 +4,6 @@ # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. -DIRS += ['config'] - if CONFIG['DEHYDRA_PATH']: DIRS += ['analysis-tests'] diff --git a/js/src/shell/Makefile.in b/js/src/shell/Makefile.in index a9c30fa83f5..0261f61aa19 100644 --- a/js/src/shell/Makefile.in +++ b/js/src/shell/Makefile.in @@ -4,7 +4,7 @@ # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. -LIBS = $(NSPR_LIBS) $(EDITLINE_LIBS) $(DEPTH)/$(LIB_PREFIX)js_static.$(LIB_SUFFIX) $(MOZ_ZLIB_LIBS) +LIBS = $(NSPR_LIBS) $(EDITLINE_LIBS) ../$(LIB_PREFIX)js_static.$(LIB_SUFFIX) $(MOZ_ZLIB_LIBS) ifdef MOZ_NATIVE_FFI EXTRA_LIBS += $(MOZ_FFI_LIBS) endif @@ -12,7 +12,7 @@ ifdef MOZ_SHARED_ICU EXTRA_LIBS += $(MOZ_ICU_LIBS) endif -LOCAL_INCLUDES += -I$(topsrcdir) -I.. +LOCAL_INCLUDES += -I$(srcdir)/.. -I.. ifeq ($(OS_ARCH),Darwin) ifeq ($(TARGET_CPU),x86_64) @@ -28,7 +28,7 @@ endif # the build directory and in the dist/bin directory. PP_TARGETS += SHELL_AUTOLOAD SHELL_AUTOLOAD := js-gdb.py.in -SHELL_AUTOLOAD_FLAGS := -Dtopsrcdir=$(abspath $(topsrcdir)) +SHELL_AUTOLOAD_FLAGS := -Dtopsrcdir=$(abspath $(srcdir)/..) INSTALL_TARGETS += SHELL_INSTALL_AUTOLOAD SHELL_INSTALL_AUTOLOAD_FILES := $(CURDIR)/js-gdb.py @@ -42,9 +42,9 @@ include $(topsrcdir)/config/rules.mk # People expect the js shell to wind up in the top-level JS dir. libs:: - $(INSTALL) $(IFLAGS2) $(PROGRAM) $(DEPTH) + $(INSTALL) $(IFLAGS2) $(PROGRAM) .. -GARBAGE += $(DEPTH)/$(PROGRAM) +GARBAGE += ../$(PROGRAM) install:: $(PROGRAM) $(SYSINSTALL) $^ $(DESTDIR)$(bindir) diff --git a/moz.build b/moz.build index 544509a820c..48a96dba85e 100644 --- a/moz.build +++ b/moz.build @@ -5,30 +5,40 @@ # file, You can obtain one at http://mozilla.org/MPL/2.0/. CONFIGURE_SUBST_FILES += [ - 'mozilla-config.h', - 'tools/update-packaging/Makefile', + 'config/autoconf.mk', + 'config/emptyvars.mk', ] -if CONFIG['ENABLE_CLANG_PLUGIN']: - add_tier_dir('base', 'build/clang-plugin', external=True) +if CONFIG['BUILDING_JS']: + if CONFIG['JS_STANDALONE']: + DIRS += ['config'] + DIRS += ['js/src'] +else: + CONFIGURE_SUBST_FILES += [ + 'mozilla-config.h', + 'tools/update-packaging/Makefile', + ] -add_tier_dir('base', ['config', 'build', 'probes', 'python']) + if CONFIG['ENABLE_CLANG_PLUGIN']: + add_tier_dir('base', 'build/clang-plugin', external=True) -if not CONFIG['LIBXUL_SDK']: - add_tier_dir('base', ['mfbt']) + add_tier_dir('base', ['config', 'build', 'probes', 'python']) - if CONFIG['MOZ_WIDGET_TOOLKIT'] in ('android', 'gonk'): - add_tier_dir('base', ['other-licenses/android']) + if not CONFIG['LIBXUL_SDK']: + add_tier_dir('base', ['mfbt']) - if CONFIG['MOZ_MEMORY']: - add_tier_dir('base', ['memory']) + if CONFIG['MOZ_WIDGET_TOOLKIT'] in ('android', 'gonk'): + add_tier_dir('base', ['other-licenses/android']) - if not CONFIG['MOZ_NATIVE_ZLIB']: - add_tier_dir('base', ['modules/zlib']) + if CONFIG['MOZ_MEMORY']: + add_tier_dir('base', ['memory']) - add_tier_dir('base', ['mozglue', 'memory/mozalloc']) + if not CONFIG['MOZ_NATIVE_ZLIB']: + add_tier_dir('base', ['modules/zlib']) -add_tier_dir('precompile', 'xpcom/xpidl') + add_tier_dir('base', ['mozglue', 'memory/mozalloc']) -# Bring in the configuration for the configured application. -include('/' + CONFIG['MOZ_BUILD_APP'] + '/app.mozbuild') + add_tier_dir('precompile', 'xpcom/xpidl') + + # Bring in the configuration for the configured application. + include('/' + CONFIG['MOZ_BUILD_APP'] + '/app.mozbuild') diff --git a/python/mozbuild/mozbuild/backend/recursivemake.py b/python/mozbuild/mozbuild/backend/recursivemake.py index 500b6eb3c59..005f3e251a1 100644 --- a/python/mozbuild/mozbuild/backend/recursivemake.py +++ b/python/mozbuild/mozbuild/backend/recursivemake.py @@ -554,7 +554,8 @@ class RecursiveMakeBackend(CommonBackend): if dirs: # For build systems without tiers (js/src), output a list # of directories for each tier. - root_mk.add_statement('%s_dirs := %s' % (tier, ' '.join(dirs))) + all_dirs = self._traversal.traverse('', filter) + root_mk.add_statement('%s_dirs := %s' % (tier, ' '.join(all_dirs))) continue if subtiers: # Output the list of filtered subtiers for the given tier. diff --git a/testing/testsuite-targets.mk b/testing/testsuite-targets.mk index cfad7aea76c..bc6fcb07db9 100644 --- a/testing/testsuite-targets.mk +++ b/testing/testsuite-targets.mk @@ -479,7 +479,7 @@ stage-xpcshell: make-stage-dir $(MAKE) -C $(DEPTH)/testing/xpcshell stage-package stage-jstests: make-stage-dir - $(MAKE) -C $(DEPTH)/js/src/tests stage-package + $(MAKE) -C $(DEPTH)/js/src/js/src/tests stage-package stage-android: make-stage-dir ifdef MOZ_ENABLE_SZIP diff --git a/toolkit/mozapps/installer/packager.mk b/toolkit/mozapps/installer/packager.mk index 41029934582..2fb75855ed5 100644 --- a/toolkit/mozapps/installer/packager.mk +++ b/toolkit/mozapps/installer/packager.mk @@ -381,8 +381,11 @@ RELEASE_SIGN_ANDROID_APK = \ $(RM) $(2)-unaligned.apk ROBOCOP_PATH = $(abspath $(_ABS_DIST)/../build/mobile/robocop) +# Normally, $(NSINSTALL) would be used instead of cp, but INNER_ROBOCOP_PACKAGE +# is used in a series of commands that run under a "cd something", while +# $(NSINSTALL) is relative. INNER_ROBOCOP_PACKAGE= \ - $(NSINSTALL) $(GECKO_APP_AP_PATH)/fennec_ids.txt $(_ABS_DIST) && \ + cp $(GECKO_APP_AP_PATH)/fennec_ids.txt $(_ABS_DIST) && \ $(call RELEASE_SIGN_ANDROID_APK,$(ROBOCOP_PATH)/robocop-debug-unsigned-unaligned.apk,$(_ABS_DIST)/robocop.apk) BACKGROUND_TESTS_PATH = $(abspath $(_ABS_DIST)/../mobile/android/tests/background/junit3) From 30c58e646ddb2df3b4ec6991f7a12c83ac618fce Mon Sep 17 00:00:00 2001 From: Cameron McCormack Date: Tue, 14 Jan 2014 09:24:22 +1100 Subject: [PATCH 13/19] Bug 959016 - Add lldb Python command handlers for debugging Gecko, starting with frametree and frametreelimited. (DONTBUILD) r=ehsan --- .lldbinit | 5 +++++ layout/generic/nsFrame.cpp | 6 ++++++ layout/generic/nsIFrame.h | 1 + python/lldbutils/README.txt | 12 ++++++++++++ python/lldbutils/lldbutils/__init__.py | 7 +++++++ python/lldbutils/lldbutils/layout.py | 15 +++++++++++++++ 6 files changed, 46 insertions(+) create mode 100644 python/lldbutils/README.txt create mode 100644 python/lldbutils/lldbutils/__init__.py create mode 100644 python/lldbutils/lldbutils/layout.py diff --git a/.lldbinit b/.lldbinit index 17215fb7d82..8564681b0f2 100644 --- a/.lldbinit +++ b/.lldbinit @@ -9,3 +9,8 @@ settings set target.inline-breakpoint-strategy always # will show a variable declared as "nsIFrame *" that points to an nsBlockFrame # object as being of type "nsBlockFrame *" rather than "nsIFrame *". settings set target.prefer-dynamic-value run-target + +# Import the module that defines complex Gecko debugging commands. Rather +# than do any kind of searching, this assumes that you are running lldb from +# the top level source directory. +script sys.path.append('python/lldbutils'); import lldbutils; lldbutils.init() diff --git a/layout/generic/nsFrame.cpp b/layout/generic/nsFrame.cpp index 3b5d5a0fa1c..8decf170488 100644 --- a/layout/generic/nsFrame.cpp +++ b/layout/generic/nsFrame.cpp @@ -5374,6 +5374,12 @@ nsIFrame::DumpFrameTree() RootFrameList(PresContext(), stdout, 0); } +void +nsIFrame::DumpFrameTreeLimited() +{ + List(stdout, 0); +} + void nsIFrame::RootFrameList(nsPresContext* aPresContext, FILE* out, int32_t aIndent) { diff --git a/layout/generic/nsIFrame.h b/layout/generic/nsIFrame.h index 060d9c5c1a6..53dbfedd524 100644 --- a/layout/generic/nsIFrame.h +++ b/layout/generic/nsIFrame.h @@ -3261,6 +3261,7 @@ public: static void RootFrameList(nsPresContext* aPresContext, FILE* out, int32_t aIndent); virtual void DumpFrameTree(); + void DumpFrameTreeLimited(); NS_IMETHOD GetFrameName(nsAString& aResult) const = 0; #endif diff --git a/python/lldbutils/README.txt b/python/lldbutils/README.txt new file mode 100644 index 00000000000..8957b3a9ced --- /dev/null +++ b/python/lldbutils/README.txt @@ -0,0 +1,12 @@ +lldb debugging functionality for Gecko +-------------------------------------- + +This directory contains a module, lldbutils, which is imported by the +in-tree .lldbinit file. The lldbutil modules define some lldb commands +that are handy for debugging Gecko. + +If you want to add a new command or Python-implemented type summary, either add +it to one of the existing broad area Python files (such as lldbutils/layout.py +for layout-related commands) or create a new file if none of the existing files +is appropriate. If you add a new file, make sure you add it to __all__ in +lldbutils/__init__.py. diff --git a/python/lldbutils/lldbutils/__init__.py b/python/lldbutils/lldbutils/__init__.py new file mode 100644 index 00000000000..1552d5f0bb4 --- /dev/null +++ b/python/lldbutils/lldbutils/__init__.py @@ -0,0 +1,7 @@ +import lldb + +__all__ = ['layout'] + +def init(): + for name in __all__: + __import__('lldbutils.' + name, globals(), locals(), ['init']).init(lldb.debugger) diff --git a/python/lldbutils/lldbutils/layout.py b/python/lldbutils/lldbutils/layout.py new file mode 100644 index 00000000000..97b4218a2ac --- /dev/null +++ b/python/lldbutils/lldbutils/layout.py @@ -0,0 +1,15 @@ +import lldb + +def frametree(debugger, command, result, dict): + """Dumps the frame tree containing the given nsIFrame*.""" + debugger.HandleCommand('expr (' + command + ')->DumpFrameTree()') + +def frametreelimited(debugger, command, result, dict): + """Dumps the subtree of a frame tree rooted at the given nsIFrame*.""" + debugger.HandleCommand('expr (' + command + ')->DumpFrameTreeLimited()') + +def init(debugger): + debugger.HandleCommand('command script add -f lldbutils.layout.frametree frametree') + debugger.HandleCommand('command script add -f lldbutils.layout.frametree frametreelimited') + debugger.HandleCommand('command alias ft frametree') + debugger.HandleCommand('command alias ftl frametree') From aad7f635be0380900f5b25089cc4fd0903a106aa Mon Sep 17 00:00:00 2001 From: Andrea Marchesini Date: Mon, 13 Jan 2014 23:46:04 +0100 Subject: [PATCH 14/19] Bug 959190 - [URL API] stringify href attribute, r=bz --- dom/base/URL.h | 5 +++ dom/base/test/mochitest.ini | 13 ++++---- dom/base/test/test_url.html | 2 ++ dom/base/test/test_urlutils_stringify.html | 38 ++++++++++++++++++++++ dom/webidl/HTMLAnchorElement.webidl | 1 - dom/webidl/HTMLAreaElement.webidl | 1 - dom/webidl/URLUtils.webidl | 3 ++ dom/workers/URL.h | 5 +++ dom/workers/test/urlApi_worker.js | 2 ++ 9 files changed, 62 insertions(+), 8 deletions(-) create mode 100644 dom/base/test/test_urlutils_stringify.html diff --git a/dom/base/URL.h b/dom/base/URL.h index 76a715e6491..20d0109dc4f 100644 --- a/dom/base/URL.h +++ b/dom/base/URL.h @@ -118,6 +118,11 @@ public: void SetHash(const nsAString& aArg); + void Stringify(nsString& aRetval) const + { + GetHref(aRetval); + } + // URLSearchParamsObserver void URLSearchParamsUpdated() MOZ_OVERRIDE; void URLSearchParamsNeedsUpdates() MOZ_OVERRIDE; diff --git a/dom/base/test/mochitest.ini b/dom/base/test/mochitest.ini index 61a915c49f9..b8b227fe8e7 100644 --- a/dom/base/test/mochitest.ini +++ b/dom/base/test/mochitest.ini @@ -28,23 +28,24 @@ support-files = [test_messageChannel_post.html] [test_messageChannel_pref.html] [test_messageChannel_start.html] +[test_messagemanager_targetchain.html] [test_messageChannel_transferable.html] [test_messageChannel_unshipped.html] [test_named_frames.html] [test_nondomexception.html] +[test_openDialogChromeOnly.html] +[test_postMessage_solidus.html] [test_screen_orientation.html] [test_settimeout_inner.html] [test_setting_opener.html] [test_url.html] +[test_url_empty_port.html] +[test_urlExceptions.html] +[test_urlSearchParams.html] +[test_urlutils_stringify.html] [test_window_constructor.html] [test_window_cross_origin_props.html] [test_window_enumeration.html] [test_window_extensible.html] [test_window_indexing.html] [test_writable-replaceable.html] -[test_urlExceptions.html] -[test_openDialogChromeOnly.html] -[test_messagemanager_targetchain.html] -[test_url_empty_port.html] -[test_postMessage_solidus.html] -[test_urlSearchParams.html] diff --git a/dom/base/test/test_url.html b/dom/base/test/test_url.html index afa0bbfcfba..6c60d8cc9d2 100644 --- a/dom/base/test/test_url.html +++ b/dom/base/test/test_url.html @@ -270,6 +270,8 @@ https://bugzilla.mozilla.org/show_bug.cgi?id=887364 if ('pathname' in test) is(test.pathname, url.pathname, "pathname"); if ('search' in test) is(test.search, url.search, "search"); if ('hash' in test) is(test.hash, url.hash, "hash"); + + if ('href' in test) is (test.href, url + '', 'stringify works'); } diff --git a/dom/base/test/test_urlutils_stringify.html b/dom/base/test/test_urlutils_stringify.html new file mode 100644 index 00000000000..a5f9dce83ad --- /dev/null +++ b/dom/base/test/test_urlutils_stringify.html @@ -0,0 +1,38 @@ + + + + + + + Test for Bug 959190 + + + + +Mozilla Bug 959190 +

+ +
+
+ foobar + + + + diff --git a/dom/webidl/HTMLAnchorElement.webidl b/dom/webidl/HTMLAnchorElement.webidl index a603557b0f0..9d253bc8c4d 100644 --- a/dom/webidl/HTMLAnchorElement.webidl +++ b/dom/webidl/HTMLAnchorElement.webidl @@ -13,7 +13,6 @@ // http://www.whatwg.org/specs/web-apps/current-work/#the-a-element interface HTMLAnchorElement : HTMLElement { - stringifier; [SetterThrows] attribute DOMString target; [SetterThrows] diff --git a/dom/webidl/HTMLAreaElement.webidl b/dom/webidl/HTMLAreaElement.webidl index 7a512f498ae..b5437f54c30 100644 --- a/dom/webidl/HTMLAreaElement.webidl +++ b/dom/webidl/HTMLAreaElement.webidl @@ -14,7 +14,6 @@ // http://www.whatwg.org/specs/web-apps/current-work/#the-area-element interface HTMLAreaElement : HTMLElement { -stringifier; [SetterThrows] attribute DOMString alt; [SetterThrows] diff --git a/dom/webidl/URLUtils.webidl b/dom/webidl/URLUtils.webidl index 033a6fca929..12cebceb74d 100644 --- a/dom/webidl/URLUtils.webidl +++ b/dom/webidl/URLUtils.webidl @@ -29,5 +29,8 @@ interface URLUtils { attribute DOMString search; attribute URLSearchParams? searchParams; attribute DOMString hash; + + // Bug 824857 should remove this. + stringifier; }; diff --git a/dom/workers/URL.h b/dom/workers/URL.h index 922c6c837e1..69c041e4a86 100644 --- a/dom/workers/URL.h +++ b/dom/workers/URL.h @@ -112,6 +112,11 @@ public: void SetHash(const nsAString& aHash); + void Stringify(nsString& aRetval) const + { + GetHref(aRetval); + } + // IURLSearchParamsObserver void URLSearchParamsUpdated() MOZ_OVERRIDE; void URLSearchParamsNeedsUpdates() MOZ_OVERRIDE; diff --git a/dom/workers/test/urlApi_worker.js b/dom/workers/test/urlApi_worker.js index 5a4633b6ba3..0fb3ae1c9eb 100644 --- a/dom/workers/test/urlApi_worker.js +++ b/dom/workers/test/urlApi_worker.js @@ -263,6 +263,8 @@ onmessage = function() { if ('pathname' in test) is(test.pathname, url.pathname, "pathname"); if ('search' in test) is(test.search, url.search, "search"); if ('hash' in test) is(test.hash, url.hash, "hash"); + + if ('href' in test) is (test.href, url + '', 'stringify works'); } postMessage({type: 'finish' }); From b7194c8d919ce1fac7866c5b4b16202b5a8baa43 Mon Sep 17 00:00:00 2001 From: Kyle Huey Date: Mon, 13 Jan 2014 15:22:53 -0800 Subject: [PATCH 15/19] Bug 957693: Check the state of the sync loop after processing control runnables, which might cause the world to shift underneath us. r=bent --- dom/workers/WorkerPrivate.cpp | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/dom/workers/WorkerPrivate.cpp b/dom/workers/WorkerPrivate.cpp index f143aabe5e1..d40e2833564 100644 --- a/dom/workers/WorkerPrivate.cpp +++ b/dom/workers/WorkerPrivate.cpp @@ -4857,19 +4857,23 @@ WorkerPrivate::RunCurrentSyncLoop() ProcessAllControlRunnablesLocked(); - if (normalRunnablesPending) { + // NB: If we processed a NotifyRunnable, we might have run non-control + // runnables, one of which may have shut down the sync loop. + if (normalRunnablesPending || loopInfo->mCompleted) { break; } } } - // Make sure the periodic timer is running before we continue. - SetGCTimerMode(PeriodicTimer); + if (normalRunnablesPending) { + // Make sure the periodic timer is running before we continue. + SetGCTimerMode(PeriodicTimer); - MOZ_ALWAYS_TRUE(NS_ProcessNextEvent(thread, false)); + MOZ_ALWAYS_TRUE(NS_ProcessNextEvent(thread, false)); - // Now *might* be a good time to GC. Let the JS engine make the decision. - JS_MaybeGC(cx); + // Now *might* be a good time to GC. Let the JS engine make the decision. + JS_MaybeGC(cx); + } } // Make sure that the stack didn't change underneath us. From ce0275a3fad19e6d34c5235f8c8fcfd0cab4558d Mon Sep 17 00:00:00 2001 From: Edwin Flores Date: Tue, 14 Jan 2014 12:38:40 +1300 Subject: [PATCH 16/19] Bug 945864 - Remove buggy MediaOmxReader::GetBuffered method override r=cpearce --- content/media/omx/MediaOmxReader.cpp | 45 ---------------------------- content/media/omx/MediaOmxReader.h | 1 - 2 files changed, 46 deletions(-) diff --git a/content/media/omx/MediaOmxReader.cpp b/content/media/omx/MediaOmxReader.cpp index dcc847a0628..cf19ada6c96 100644 --- a/content/media/omx/MediaOmxReader.cpp +++ b/content/media/omx/MediaOmxReader.cpp @@ -360,51 +360,6 @@ static uint64_t BytesToTime(int64_t offset, uint64_t length, uint64_t durationUs return uint64_t(double(durationUs) * perc); } -nsresult MediaOmxReader::GetBuffered(mozilla::dom::TimeRanges* aBuffered, int64_t aStartTime) -{ - if (!mOmxDecoder.get()) - return NS_OK; - - MediaResource* stream = mOmxDecoder->GetResource(); - - int64_t durationUs = 0; - mOmxDecoder->GetDuration(&durationUs); - - // Nothing to cache if the media takes 0us to play. - if (!durationUs) - return NS_OK; - - // Special case completely cached files. This also handles local files. - if (stream->IsDataCachedToEndOfResource(0)) { - aBuffered->Add(0, durationUs); - return NS_OK; - } - - int64_t totalBytes = stream->GetLength(); - - // If we can't determine the total size, pretend that we have nothing - // buffered. This will put us in a state of eternally-low-on-undecoded-data - // which is not get, but about the best we can do. - if (totalBytes == -1) - return NS_OK; - - int64_t startOffset = stream->GetNextCachedData(0); - while (startOffset >= 0) { - int64_t endOffset = stream->GetCachedDataEnd(startOffset); - // Bytes [startOffset..endOffset] are cached. - NS_ASSERTION(startOffset >= 0, "Integer underflow in GetBuffered"); - NS_ASSERTION(endOffset >= 0, "Integer underflow in GetBuffered"); - - uint64_t startUs = BytesToTime(startOffset, totalBytes, durationUs); - uint64_t endUs = BytesToTime(endOffset, totalBytes, durationUs); - if (startUs != endUs) { - aBuffered->Add((double)startUs / USECS_PER_S, (double)endUs / USECS_PER_S); - } - startOffset = stream->GetNextCachedData(endOffset); - } - return NS_OK; -} - void MediaOmxReader::OnDecodeThreadFinish() { if (mOmxDecoder.get()) { mOmxDecoder->Pause(); diff --git a/content/media/omx/MediaOmxReader.h b/content/media/omx/MediaOmxReader.h index a8c6d714905..ef60e266e10 100644 --- a/content/media/omx/MediaOmxReader.h +++ b/content/media/omx/MediaOmxReader.h @@ -75,7 +75,6 @@ public: virtual nsresult ReadMetadata(MediaInfo* aInfo, MetadataTags** aTags); virtual nsresult Seek(int64_t aTime, int64_t aStartTime, int64_t aEndTime, int64_t aCurrentTime); - virtual nsresult GetBuffered(mozilla::dom::TimeRanges* aBuffered, int64_t aStartTime); virtual void OnDecodeThreadStart() MOZ_OVERRIDE; From 159c40ebd0483bcbe3e81ff1860d430615c0a0fc Mon Sep 17 00:00:00 2001 From: Masayuki Nakano Date: Tue, 14 Jan 2014 09:13:25 +0900 Subject: [PATCH 17/19] Bug 957019 Don't check mouse cursor position at handling non-mouse message in nsWindow::DealWithPopups() r=jimm+enndeakin --- widget/windows/nsWindow.cpp | 58 ++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 27 deletions(-) diff --git a/widget/windows/nsWindow.cpp b/widget/windows/nsWindow.cpp index fd4c2006cbf..f2cd1b66721 100644 --- a/widget/windows/nsWindow.cpp +++ b/widget/windows/nsWindow.cpp @@ -7390,25 +7390,39 @@ nsWindow::DealWithPopups(HWND aWnd, UINT aMessage, ::PostMessageW(aWnd, MOZ_WM_REACTIVATE, aWParam, aLParam); return true; } - } else if (sPendingNCACTIVATE && LOWORD(aWParam) == WA_INACTIVE && - NeedsToHandleNCActivateDelayed(aWnd)) { - // If focus moves to non-popup widget or focusable popup, the window - // needs to update its nonclient area. + // Don't rollup the popup when focus moves back to the parent window + // from a popup because such case is caused by strange mouse drivers. + nsWindow* prevWindow = + WinUtils::GetNSWindowPtr(reinterpret_cast(aLParam)); + if (prevWindow && prevWindow->IsPopup()) { + return false; + } + } else if (LOWORD(aWParam) == WA_INACTIVE) { nsWindow* activeWindow = WinUtils::GetNSWindowPtr(reinterpret_cast(aLParam)); - if (!activeWindow || !activeWindow->IsPopup()) { - sSendingNCACTIVATE = true; - ::SendMessageW(aWnd, WM_NCACTIVATE, false, 0); - sSendingNCACTIVATE = false; + if (sPendingNCACTIVATE && NeedsToHandleNCActivateDelayed(aWnd)) { + // If focus moves to non-popup widget or focusable popup, the window + // needs to update its nonclient area. + if (!activeWindow || !activeWindow->IsPopup()) { + sSendingNCACTIVATE = true; + ::SendMessageW(aWnd, WM_NCACTIVATE, false, 0); + sSendingNCACTIVATE = false; + } + sPendingNCACTIVATE = false; + } + // If focus moves from/to popup, we don't need to rollup the popup + // because such case is caused by strange mouse drivers. + if (activeWindow) { + if (activeWindow->IsPopup()) { + return false; + } + nsWindow* deactiveWindow = WinUtils::GetNSWindowPtr(aWnd); + if (deactiveWindow && deactiveWindow->IsPopup()) { + return false; + } } - sPendingNCACTIVATE = false; } - // XXX Why do we need to check the message pos? - if (!EventIsInsideWindow(popupWindow) && - GetPopupsToRollup(rollupListener, &popupsToRollup)) { - break; - } - return false; + break; case MOZ_WM_REACTIVATE: // The previous active window should take back focus. @@ -7432,7 +7446,6 @@ nsWindow::DealWithPopups(HWND aWnd, UINT aMessage, return false; case WM_MOUSEACTIVATE: - // XXX Why do we need to check the message pos? if (!EventIsInsideWindow(popupWindow) && GetPopupsToRollup(rollupListener, &popupsToRollup)) { // WM_MOUSEACTIVATE may be caused by moving the mouse (e.g., X-mouse @@ -7456,23 +7469,14 @@ nsWindow::DealWithPopups(HWND aWnd, UINT aMessage, // If focus moves to other window created in different process/thread, // e.g., a plugin window, popups should be rolled up. if (IsDifferentThreadWindow(reinterpret_cast(aWParam))) { - // XXX Why do we need to check the message pos? - if (!EventIsInsideWindow(popupWindow) && - GetPopupsToRollup(rollupListener, &popupsToRollup)) { - break; - } + break; } return false; case WM_MOVING: case WM_SIZING: case WM_MENUSELECT: - // XXX Why do we need to check the message pos? - if (!EventIsInsideWindow(popupWindow) && - GetPopupsToRollup(rollupListener, &popupsToRollup)) { - break; - } - return false; + break; default: return false; From 62b40c2b3fc748f4ef85c5e8cc0a5a4dabcba1a0 Mon Sep 17 00:00:00 2001 From: Nicholas Hurley Date: Mon, 13 Jan 2014 17:16:26 -0800 Subject: [PATCH 18/19] Bug 958992 - http/2 draft09 support. r=mcmanus --- netwerk/protocol/http/Http2Compression.cpp | 54 ++++++++++++++++++++-- netwerk/protocol/http/nsHttp.h | 7 +-- 2 files changed, 55 insertions(+), 6 deletions(-) diff --git a/netwerk/protocol/http/Http2Compression.cpp b/netwerk/protocol/http/Http2Compression.cpp index f0065a5ae6e..08f5c9ede25 100644 --- a/netwerk/protocol/http/Http2Compression.cpp +++ b/netwerk/protocol/http/Http2Compression.cpp @@ -81,6 +81,7 @@ InitializeStaticHeaders() AddStaticElement(NS_LITERAL_CSTRING("expect")); AddStaticElement(NS_LITERAL_CSTRING("expires")); AddStaticElement(NS_LITERAL_CSTRING("from")); + AddStaticElement(NS_LITERAL_CSTRING("host")); AddStaticElement(NS_LITERAL_CSTRING("if-match")); AddStaticElement(NS_LITERAL_CSTRING("if-modified-since")); AddStaticElement(NS_LITERAL_CSTRING("if-none-match")); @@ -434,7 +435,22 @@ Http2Decompressor::OutputHeader(const nsACString &name, const nsACString &value) mOutput->Append(name); mOutput->Append(NS_LITERAL_CSTRING(": ")); - mOutput->Append(value); + // Special handling for set-cookie according to the spec + bool isSetCookie = name.Equals(NS_LITERAL_CSTRING("set-cookie")); + int32_t valueLen = value.Length(); + for (int32_t i = 0; i < valueLen; ++i) { + if (value[i] == '\0') { + if (isSetCookie) { + mOutput->Append(NS_LITERAL_CSTRING("\r\n")); + mOutput->Append(name); + mOutput->Append(NS_LITERAL_CSTRING(": ")); + } else { + mOutput->Append(NS_LITERAL_CSTRING(", ")); + } + } else { + mOutput->Append(value[i]); + } + } mOutput->Append(NS_LITERAL_CSTRING("\r\n")); return NS_OK; } @@ -688,6 +704,14 @@ Http2Decompressor::DoIndexed() LOG3(("HTTP decompressor indexed entry %u\n", index)); + if (index == 0) { + // Index 0 is a special case - it clear out the reference set + mReferenceSet.Clear(); + mAlternateReferenceSet.Clear(); + return NS_OK; + } + index--; // Internally, we 0-index everything, since this is, y'know, C++ + // Toggle this in the reference set.. // if its not currently in the reference set then add it and // also emit it. If it is currently in the reference set then just @@ -922,7 +946,25 @@ Http2Compressor::EncodeHeaderBlock(const nsCString &nvInput, mParsedContentLength = len; } - ProcessHeader(nvPair(name, value)); + if (name.Equals("cookie")) { + // cookie crumbling + bool haveMoreCookies = true; + int32_t nextCookie = valueIndex; + while (haveMoreCookies) { + int32_t semiSpaceIndex = nvInput.Find("; ", false, nextCookie, + crlfIndex - nextCookie); + if (semiSpaceIndex == -1) { + haveMoreCookies = false; + semiSpaceIndex = crlfIndex; + } + nsDependentCSubstring cookie = Substring(beginBuffer + nextCookie, + beginBuffer + semiSpaceIndex); + ProcessHeader(nvPair(name, cookie)); + nextCookie = semiSpaceIndex + 2; + } + } else { + ProcessHeader(nvPair(name, value)); + } } // iterate mreference set and if !alternate.contains(old[i]) @@ -957,6 +999,8 @@ Http2Compressor::DoOutput(Http2Compressor::outputCode code, LOG3(("HTTP compressor %p noindex literal with name reference %u %s: %s\n", this, index, pair->mName.get(), pair->mValue.get())); + // In this case, the index will have already been adjusted to be 1-based + // instead of 0-based. EncodeInteger(6, index); // 01 2 bit prefix startByte = reinterpret_cast(mOutput->BeginWriting()) + offset; *startByte = (*startByte & 0x3f) | 0x40; @@ -972,6 +1016,8 @@ Http2Compressor::DoOutput(Http2Compressor::outputCode code, LOG3(("HTTP compressor %p literal with name reference %u %s: %s\n", this, index, pair->mName.get(), pair->mValue.get())); + // In this case, the index will have already been adjusted to be 1-based + // instead of 0-based. EncodeInteger(6, index); // 00 2 bit prefix startByte = reinterpret_cast(mOutput->BeginWriting()) + offset; *startByte = *startByte & 0x3f; @@ -988,7 +1034,9 @@ Http2Compressor::DoOutput(Http2Compressor::outputCode code, LOG3(("HTTP compressor %p toggle %s index %u %s\n", this, (code == kToggleOff) ? "off" : "on", index, pair->mName.get())); - EncodeInteger(7, index); + // In this case, we are passed the raw 0-based C index, and need to + // increment to make it 1-based and comply with the spec + EncodeInteger(7, index + 1); startByte = reinterpret_cast(mOutput->BeginWriting()) + offset; *startByte = *startByte | 0x80; // 1 1 bit prefix break; diff --git a/netwerk/protocol/http/nsHttp.h b/netwerk/protocol/http/nsHttp.h index f3ba845ff0c..e071fed5594 100644 --- a/netwerk/protocol/http/nsHttp.h +++ b/netwerk/protocol/http/nsHttp.h @@ -31,13 +31,14 @@ namespace net { // leave room for official versions. telem goes to 48 // 24 was a internal spdy/3.1 // 25 was spdy/4a2 - HTTP2_VERSION_DRAFT08 = 26 + // 26 was http/2-draft08 and http/2-draft07 (they were the same) + HTTP2_VERSION_DRAFT09 = 27 }; typedef uint8_t nsHttpVersion; -#define NS_HTTP2_DRAFT_VERSION HTTP2_VERSION_DRAFT08 -#define NS_HTTP2_DRAFT_TOKEN "HTTP-draft-08/2.0" +#define NS_HTTP2_DRAFT_VERSION HTTP2_VERSION_DRAFT09 +#define NS_HTTP2_DRAFT_TOKEN "HTTP-draft-09/2.0" //----------------------------------------------------------------------------- // http connection capabilities From 40e67a768dbad61852097e98fc938c0520b07060 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Moln=C3=A1r?= Date: Mon, 13 Jan 2014 17:16:28 -0800 Subject: [PATCH 19/19] Bug 958992 - http2 draft09 test support. r=hurley --- netwerk/test/unit/test_http2.js | 2 +- testing/xpcshell/node-http2/HISTORY.md | 12 + testing/xpcshell/node-http2/README.md | 2 +- testing/xpcshell/node-http2/doc/http.html | 13 +- testing/xpcshell/node-http2/doc/index.html | 2 +- testing/xpcshell/node-http2/lib/http.js | 15 +- testing/xpcshell/node-http2/lib/index.js | 4 +- .../node_modules/http2-protocol/HISTORY.md | 7 + .../node_modules/http2-protocol/README.md | 12 +- .../http2-protocol/doc/compressor.html | 237 +++++++++++++----- .../node_modules/http2-protocol/doc/flow.html | 2 +- .../http2-protocol/doc/framer.html | 24 +- .../http2-protocol/doc/index.html | 6 +- .../http2-protocol/doc/stream.html | 2 +- .../http2-protocol/lib/compressor.js | 119 ++++++--- .../node_modules/http2-protocol/lib/flow.js | 2 +- .../node_modules/http2-protocol/lib/framer.js | 24 +- .../node_modules/http2-protocol/lib/index.js | 10 +- .../node_modules/http2-protocol/lib/stream.js | 2 +- .../node_modules/http2-protocol/package.json | 8 +- .../http2-protocol/test/compressor.js | 23 +- testing/xpcshell/node-http2/package.json | 8 +- 22 files changed, 366 insertions(+), 170 deletions(-) diff --git a/netwerk/test/unit/test_http2.js b/netwerk/test/unit/test_http2.js index 3c3e9f9da8b..56c361114a4 100644 --- a/netwerk/test/unit/test_http2.js +++ b/netwerk/test/unit/test_http2.js @@ -25,7 +25,7 @@ var bigListenerMD5 = '8f607cfdd2c87d6a7eedb657dafbd836'; function checkIsHttp2(request) { try { - if (request.getResponseHeader("X-Firefox-Spdy") == "HTTP-draft-08/2.0") { + if (request.getResponseHeader("X-Firefox-Spdy") == "HTTP-draft-09/2.0") { if (request.getResponseHeader("X-Connection-Http2") == "yes") { return true; } diff --git a/testing/xpcshell/node-http2/HISTORY.md b/testing/xpcshell/node-http2/HISTORY.md index a2acdd21d10..987217d7112 100644 --- a/testing/xpcshell/node-http2/HISTORY.md +++ b/testing/xpcshell/node-http2/HISTORY.md @@ -1,6 +1,18 @@ Version history =============== +### 2.2.0 (2013-12-25) ### + +* Upgrade to the latest draft: [draft-ietf-httpbis-http2-09] +* [Tarball](https://github.com/molnarg/node-http2/archive/node-http2-2.2.0.tar.gz) + +[draft-ietf-httpbis-http2-09]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09 + +### 2.1.1 (2013-12-21) ### + +* Minor bugfix +* [Tarball](https://github.com/molnarg/node-http2/archive/node-http2-2.1.1.tar.gz) + ### 2.1.0 (2013-11-10) ### * Upgrade to the latest draft: [draft-ietf-httpbis-http2-07][draft-07] diff --git a/testing/xpcshell/node-http2/README.md b/testing/xpcshell/node-http2/README.md index 6b837fae434..36b9ab8e8de 100644 --- a/testing/xpcshell/node-http2/README.md +++ b/testing/xpcshell/node-http2/README.md @@ -1,7 +1,7 @@ node-http2 ========== -An HTTP/2 ([draft-ietf-httpbis-http2-07](http://tools.ietf.org/html/draft-ietf-httpbis-http2-76)) +An HTTP/2 ([draft-ietf-httpbis-http2-09](http://tools.ietf.org/html/draft-ietf-httpbis-http2-9)) client and server implementation for node.js. Installation diff --git a/testing/xpcshell/node-http2/doc/http.html b/testing/xpcshell/node-http2/doc/http.html index fdf4436cf05..3bf7a129463 100644 --- a/testing/xpcshell/node-http2/doc/http.html +++ b/testing/xpcshell/node-http2/doc/http.html @@ -211,7 +211,7 @@ but will function normally when falling back to using HTTP/1.1.

  • Event: 'timeout'
  • response.writeContinue()
  • response.writeHead(statusCode, [reasonPhrase], [headers]): reasonPhrase will always be -ignored since it's not supported in HTTP/2
    • +ignored since it's not supported in HTTP/2
  • response.setTimeout(timeout, [callback])
    • @@ -288,11 +288,11 @@ exports.OutgoingMessage = OutgoingMessage;
    -

    The implemented version of the HTTP/2 specification is draft 04.

    +

    The implemented version of the HTTP/2 specification is draft 09.

    - 
    var implementedVersion = 'HTTP-draft-07/2.0';
    + 
    var implementedVersion = 'HTTP-draft-09/2.0';
    @@ -478,7 +478,7 @@ IncomingMessage.prototype = Object.create(PassThrough.prototype, { constructor:
    -

    Request Header Fields +

    Request Header Fields * headers argument: HTTP/2.0 request and response header fields carry information as a series of key-value pairs. This includes the target URI for the request, the status code for the response, as well as HTTP header fields.

    @@ -849,6 +849,7 @@ Server.prototype = Object.create(EventEmitter.prototype, { constructor: { value: }); endpoint.on('error', this.emit.bind(this, 'clientError')); + socket.on('error', this.emit.bind(this, 'clientError')); this.emit('connection', socket, endpoint); }; @@ -1011,7 +1012,7 @@ IncomingRequest.prototype = Object.create(IncomingMessage.prototype, { construct
    -

    Request Header Fields +

    Request Header Fields * headers argument: HTTP/2.0 request and response header fields carry information as a series of key-value pairs. This includes the target URI for the request, the status code for the response, as well as HTTP header fields.

    @@ -1737,7 +1738,7 @@ IncomingResponse.prototype = Object.create(IncomingMessage.prototype, { construc
    -

    Response Header Fields +

    Response Header Fields * headers argument: HTTP/2.0 request and response header fields carry information as a series of key-value pairs. This includes the target URI for the request, the status code for the response, as well as HTTP header fields.

    diff --git a/testing/xpcshell/node-http2/doc/index.html b/testing/xpcshell/node-http2/doc/index.html index 724ada150cc..0a75c8c8049 100644 --- a/testing/xpcshell/node-http2/doc/index.html +++ b/testing/xpcshell/node-http2/doc/index.html @@ -48,7 +48,7 @@
    -

    node-http2 is an HTTP/2 (draft 06) implementation for node.js.

    +

    node-http2 is an HTTP/2 (draft 09) implementation for node.js.

    The core of the protocol is implemented by the http2-protocol module. This module provides two important features on top of http2-protocol:

      diff --git a/testing/xpcshell/node-http2/lib/http.js b/testing/xpcshell/node-http2/lib/http.js index 2fbfbf0cf3f..f65408d1d0c 100644 --- a/testing/xpcshell/node-http2/lib/http.js +++ b/testing/xpcshell/node-http2/lib/http.js @@ -121,7 +121,7 @@ // // [1]: http://nodejs.org/api/https.html // [2]: http://nodejs.org/api/http.html -// [3]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-04#section-8.1.3 +// [3]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-8.1.3.2 // [expect-continue]: https://github.com/http2/http2-spec/issues/18 // [connect]: https://github.com/http2/http2-spec/issues/230 @@ -153,9 +153,9 @@ var deprecatedHeaders = [ 'upgrade' ]; -// The implemented version of the HTTP/2 specification is [draft 04][1]. -// [1]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-04 -var implementedVersion = 'HTTP-draft-08/2.0'; +// The implemented version of the HTTP/2 specification is [draft 09][1]. +// [1]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09 +var implementedVersion = 'HTTP-draft-09/2.0'; // When doing NPN/ALPN negotiation, HTTP/1.1 is used as fallback var supportedProtocols = [implementedVersion, 'http/1.1', 'http/1.0']; @@ -207,7 +207,7 @@ function IncomingMessage(stream) { } IncomingMessage.prototype = Object.create(PassThrough.prototype, { constructor: { value: IncomingMessage } }); -// [Request Header Fields](http://tools.ietf.org/html/draft-ietf-httpbis-http2-05#section-8.1.2.1) +// [Request Header Fields](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-8.1.3.1) // * `headers` argument: HTTP/2.0 request and response header fields carry information as a series // of key-value pairs. This includes the target URI for the request, the status code for the // response, as well as HTTP header fields. @@ -403,6 +403,7 @@ Server.prototype._start = function _start(socket) { }); endpoint.on('error', this.emit.bind(this, 'clientError')); + socket.on('error', this.emit.bind(this, 'clientError')); this.emit('connection', socket, endpoint); }; @@ -499,7 +500,7 @@ function IncomingRequest(stream) { } IncomingRequest.prototype = Object.create(IncomingMessage.prototype, { constructor: { value: IncomingRequest } }); -// [Request Header Fields](http://tools.ietf.org/html/draft-ietf-httpbis-http2-05#section-8.1.2.1) +// [Request Header Fields](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-8.1.3.1) // * `headers` argument: HTTP/2.0 request and response header fields carry information as a series // of key-value pairs. This includes the target URI for the request, the status code for the // response, as well as HTTP header fields. @@ -930,7 +931,7 @@ function IncomingResponse(stream) { } IncomingResponse.prototype = Object.create(IncomingMessage.prototype, { constructor: { value: IncomingResponse } }); -// [Response Header Fields](http://tools.ietf.org/html/draft-ietf-httpbis-http2-05#section-8.1.2.2) +// [Response Header Fields](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-8.1.3.2) // * `headers` argument: HTTP/2.0 request and response header fields carry information as a series // of key-value pairs. This includes the target URI for the request, the status code for the // response, as well as HTTP header fields. diff --git a/testing/xpcshell/node-http2/lib/index.js b/testing/xpcshell/node-http2/lib/index.js index b05f2fb6d2d..48050c16270 100644 --- a/testing/xpcshell/node-http2/lib/index.js +++ b/testing/xpcshell/node-http2/lib/index.js @@ -1,4 +1,4 @@ -// [node-http2][homepage] is an [HTTP/2 (draft 06)][http2] implementation for [node.js][node]. +// [node-http2][homepage] is an [HTTP/2 (draft 09)][http2] implementation for [node.js][node]. // // The core of the protocol is implemented by the [http2-protocol] module. This module provides // two important features on top of http2-protocol: @@ -11,7 +11,7 @@ // // [homepage]: https://github.com/molnarg/node-http2 // [http2-protocol]: https://github.com/molnarg/node-http2-protocol -// [http2]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-06 +// [http2]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09 // [node]: http://nodejs.org/ // [node-https]: http://nodejs.org/api/https.html // [node-http]: http://nodejs.org/api/http.html diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/HISTORY.md b/testing/xpcshell/node-http2/node_modules/http2-protocol/HISTORY.md index 81d55d0e8e6..a45bc54c9ff 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/HISTORY.md +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/HISTORY.md @@ -1,6 +1,13 @@ Version history =============== +### 0.9.0 (2013-12-25) ### + +* Upgrade to the latest draft: [draft-ietf-httpbis-http2-09][draft-09] +* [Tarball](https://github.com/molnarg/node-http2-protocol/archive/node-http2-protocol-0.9.0.tar.gz) + +[draft-09]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09 + ### 0.7.0 (2013-11-10) ### * Upgrade to the latest draft: [draft-ietf-httpbis-http2-07][draft-07] diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/README.md b/testing/xpcshell/node-http2/node_modules/http2-protocol/README.md index 94d7b0e2867..24a884edec7 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/README.md +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/README.md @@ -1,7 +1,7 @@ node-http2-protocol =================== -An HTTP/2 ([draft-ietf-httpbis-http2-07](http://tools.ietf.org/html/draft-ietf-httpbis-http2-07)) +An HTTP/2 ([draft-ietf-httpbis-http2-09](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09)) framing layer implementaion for node.js. Installation @@ -40,7 +40,7 @@ For pretty printing logs, you will also need a global install of bunyan (`npm in The developer documentation is located in the `doc` directory. The docs are usually updated only before releasing a new version. To regenerate them manually, run `npm run-script prepublish`. -There's a hosted version which is located [here](http://molnarg.github.io/node-http2/doc/). +There's a hosted version which is located [here](http://molnarg.github.io/node-http2-protocol/doc/). ### Running the tests ### @@ -52,10 +52,10 @@ point to understand the code. To generate a code coverage report, run `npm test --coverage` (it may be slow, be patient). Code coverage summary as of version 0.6.0: ``` -Statements : 92.39% ( 1165/1261 ) -Branches : 86.57% ( 477/551 ) -Functions : 91.22% ( 135/148 ) -Lines : 92.35% ( 1159/1255 ) +Statements : 92.43% ( 1257/1360 ) +Branches : 86.36% ( 500/579 ) +Functions : 90.12% ( 146/162 ) +Lines : 92.39% ( 1251/1354 ) ``` There's a hosted version of the detailed (line-by-line) coverage report diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/compressor.html b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/compressor.html index 05120cdb94e..bebbe5ed358 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/compressor.html +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/compressor.html @@ -73,7 +73,7 @@
      -

      The implementation of the HTTP/2 Header Compression spec is separated from +

      The implementation of the HTTP/2 Header Compression spec is separated from the 'integration' part which handles HEADERS and PUSH_PROMISE frames. The compression itself is implemented in the first part of the file, and consists of three classes: HeaderTable, HeaderSetDecompressor and HeaderSetCompressor. The two latter classes are @@ -133,9 +133,9 @@ exports.Decompressor = Decompressor;

      -

      The Header Table is a component used to associate headers to index values. It is basically an +

      The Header Table is a component used to associate headers to index values. It is basically an ordered list of [name, value] pairs, so it's implemented as a subclass of Array. -In this implementation, the Header Table and the Static Table are handled as a single table.

      +In this implementation, the Header Table and the Static Table are handled as a single table.

      @@ -163,7 +163,7 @@ In this implementation, the Header Table and the Reference Set: contains a group of headers used as a reference for the +
    • Reference Set: contains a group of headers used as a reference for the differential encoding of a new set of headers. (reference flag)
    • Emitted headers: the headers that are already emitted as part of the current decompression process (not part of the spec, emitted flag)
      • @@ -231,7 +231,7 @@ length in bytes, of its value's length in bytes and of 32 bytes.
      -

      The add(index, entry) can be used to manage the header table:

      +

      The add(index, entry) can be used to manage the header table:

      • it pushes the new entry at the beggining of the table

      • before doing such a modification, it has to be ensured that the header table size will stay @@ -302,7 +302,7 @@ HeaderTable.prototype.add = functio

        -

        The Static Table

        +

        The Static Table

        @@ -357,6 +357,7 @@ HeaderTable.prototype.add = functio [ 'expect' , '' ], [ 'expires' , '' ], [ 'from' , '' ], + [ 'host' , '' ], [ 'if-match' , '' ], [ 'if-modified-since' , '' ], [ 'if-none-match' , '' ], @@ -450,16 +451,18 @@ TransformStream class. It collects the data chunks for later processing.

        -

        execute(rep) executes the given header representation.

        +

        execute(rep) executes the given header representation.

        The JavaScript object representation of a header representation:

        {
   name: String || Integer,  // string literal or index
   value: String || Integer, // string literal or index
   index: Boolean            // with or without indexing
 }
        +

        Important: to ease the indexing of the header table, indexes start at 0 instead of 1.

        Examples:

        Indexed:
 { name: 2  , value: 2  , index: false }
+{ name: -1 , value: -1 , index: false } // reference set emptying
 Literal:
 { name: 2  , value: 'X', index: false } // without indexing
 { name: 2  , value: 'Y', index: true  } // with indexing
@@ -483,6 +486,11 @@ Literal:
                 
               
               
          
+
        • An indexed representation with an index value of 0 (in our representation, it means -1)
+entails the following actions:
            
+
          • The reference set is emptied.
            • 
+
          
+
          • 
 
        • An indexed representation corresponding to an entry present in the reference set
 entails the following actions:
            
 
          • The entry is removed from the reference set.
            • 
@@ -512,9 +520,17 @@ this new entry didn't fit in the header table)
     var index = rep.value;
     entry = this._table[index];
 
-    if (entry.reference) {
+    if (index == -1) {
+      for (var i = 0; i < this._table.length; i++) {
+        this._table[i].reference = false;
+      }
+    }
+
+    else if (entry.reference) {
       entry.reference = false;
-    } else {
+    }
+
+    else {
       pair = entry.slice();
       this.push(pair);
 
@@ -619,7 +635,7 @@ the input stream is over.
            
                 
               
               
 
             
@@ -776,7 +792,7 @@ in the reference set (that means don't remove at the end of the encoding pro
             
             
             
              if (fullMatch !== -1) {
-    rep = { name: fullMatch, value: fullMatch, index: -1 };
+    rep = { name: fullMatch, value: fullMatch, index: false };
 
     if (!entry.reference) {
       if (fullMatch >= this._table.length - this._table._staticLength) {
@@ -881,7 +897,7 @@ TransformStream class. It gets called when there's no more header to compres
             
              for (var index = 0; index < this._table.length; index++) {
     var entry = this._table[index];
     if (entry.reference && !entry.keep && !entry.emitted) {
-      this.send({ name: index, value: index, index: -1 });
+      this.send({ name: index, value: index, index: false });
       entry.reference = false;
     }
     entry.keep = false;
@@ -900,7 +916,7 @@ TransformStream class. It gets called when there's no more header to compres
               
            
                 
               
            
-              
            Detailed Format
            
+              
            Detailed Format
            
 
             
            
             
@@ -1807,16 +1823,16 @@ HeaderSetCompressor.header = functi
   }
 
   if (representation === representations.indexed) {
-    buffers.push(HeaderSetCompressor.integer(header.value, representation.prefix));
+    buffers.push(HeaderSetCompressor.integer(header.value + 1, representation.prefix));
+  }
 
-  } else {
+  else {
     if (typeof header.name === 'number') {
       buffers.push(HeaderSetCompressor.integer(header.name + 1, representation.prefix));
     } else {
       buffers.push(HeaderSetCompressor.integer(0, representation.prefix));
       buffers.push(HeaderSetCompressor.string(header.name, huffmanTable));
     }
-
     buffers.push(HeaderSetCompressor.string(header.value, huffmanTable));
   }
 
@@ -1838,17 +1854,16 @@ HeaderSetDecompressor.header = func
   }
 
   if (representation === representations.indexed) {
-    header.value = header.name = HeaderSetDecompressor.integer(buffer, representation.prefix);
+    header.value = header.name = HeaderSetDecompressor.integer(buffer, representation.prefix) - 1;
     header.index = false;
+  }
 
-  } else {
+  else {
     header.name = HeaderSetDecompressor.integer(buffer, representation.prefix) - 1;
     if (header.name === -1) {
       header.name = HeaderSetDecompressor.string(buffer, huffmanTable);
     }
-
     header.value = HeaderSetDecompressor.string(buffer, huffmanTable);
-
     header.index = (representation === representations.literalIncremental);
   }
 
@@ -1972,12 +1987,63 @@ but the API becomes simpler.
            
   var compressor = new HeaderSetCompressor(this._log, this._table, this._huffmanTable);
   for (var name in headers) {
     var value = headers[name];
+    name = String(name).toLowerCase();
            
+            
+        
+        
+        
+        
          • 
+            
            
+              
+              
            
+                
+              
            
+              
              
+
            • To allow for better compression efficiency, the Cookie header field MAY be split into
+separate header fields, each with one or more cookie-pairs.
              • 
+
            
+
+            
            
+            
+            
                if (name == 'cookie') {
+      if (!(value instanceof Array)) {
+        value = [value]
+      }
+      value = Array.prototype.concat.apply([], value.map(function(cookie) {
+        return String(cookie).split(';').map(trim)
+      }));
+    }
            
+            
+        
            • 
+        
+        
+        
          • 
+            
            
+              
+              
            
+                
+              
            
+              
              
+
            • To preserve the order of a comma-separated list, the ordered values for a single header
+field name appearing in different header fields are concatenated into a single value.
+A zero-valued octet (0x0) is used to delimit multiple values.
              • 
+
            • Header fields containing multiple values MUST be concatenated into a single value unless
+the ordering of that header field is known to be not significant.
              • 
+
            • Currently, only the Cookie header is considered to be order-insensitive.
              • 
+
            
+
+            
            
+            
+            
                if ((value instanceof Array) && (name !== 'cookie')) {
+      value = value.join('\0');
+    }
+
     if (value instanceof Array) {
-      for (var i = 0; i< value.length; i++) {
-        compressor.write([String(name), String(value[i])]);
+      for (var i = 0; i < value.length; i++) {
+        compressor.write([name, String(value[i])]);
       }
     } else {
-      compressor.write([String(name), String(value)]);
+      compressor.write([name, String(value)]);
     }
   }
   compressor.end();
@@ -1992,11 +2058,11 @@ but the API becomes simpler.
            
         
            • 
         
         
-        
          • 
+        
          • 
             
            
               
               
            
-                
+                
               
            
               
            When a frame arrives
            
 
@@ -2007,11 +2073,11 @@ but the API becomes simpler.
            
         
            • 
         
         
-        
          • 
+        
          • 
             
            
               
               
            
-                
+                
               
            
               
              
 
            • and it is a HEADERS or PUSH_PROMISE frame
                
@@ -2057,11 +2123,11 @@ marks the last frame and the END_STREAM flag which is always false before the en
         
         
         
-        
              • 
+        
              • 
             
                
               
               
                
-                
+                
               
                
               
                  
 
                • otherwise, the frame is forwarded without taking any action
                  • 
@@ -2079,11 +2145,11 @@ marks the last frame and the END_STREAM flag which is always false before the en
         
         
         
-        
                • 
+        
                • 
             
                  
               
               
                  
-                
+                
               
                  
               
                  The Decompressor class
                  
 
@@ -2092,11 +2158,11 @@ marks the last frame and the END_STREAM flag which is always false before the en
         
                  • 
         
         
-        
                • 
+        
                • 
             
                  
               
               
                  
-                
+                
               
                  
               
                  The Decompressor is a stateful transform stream, since it has to collect multiple frames first,
 and the decoding comes after unifying the payload of those frames.
                  
@@ -2124,11 +2190,11 @@ and this._stream respectively.
                  
         
                  • 
         
         
-        
                • 
+        
                • 
             
                  
               
               
                  
-                
+                
               
                  
               
                  Changing the header table size
                  
 
@@ -2141,11 +2207,11 @@ and this._stream respectively.
                  
         
                  • 
         
         
-        
                • 
+        
                • 
             
                  
               
               
                  
-                
+                
               
                  
               
                  decompress takes a full header block, and decompresses it using a new HeaderSetDecompressor
 stream instance. This means that from now on, the advantages of streaming header decoding are
@@ -2160,17 +2226,58 @@ lost, but the API becomes simpler.
                  
   var headers = {};
   var pair;
   while (pair = decompressor.read()) {
-    var name = pair[0];
-    var value = pair[1];
-    if (name in headers) {
-      if (headers[name] instanceof Array) {
-        headers[name].push(value);
+    var name = pair[0];
        + +
        • + + +
      • +
        + +
        + +
        +
          +
        • After decompression, header fields that have values containing zero octets (0x0) MUST be +split into multiple header fields before being processed.
          • +
        + +
        + + 
            var values = pair[1].split('\0');
+    for (var i = 0; i < values.length; i++) {
+      var value = values[i];
+      if (name in headers) {
+        if (headers[name] instanceof Array) {
+          headers[name].push(value);
+        } else {
+          headers[name] = [headers[name], value];
+        }
       } else {
-        headers[name] = [headers[name], value];
+        headers[name] = value;
       }
-    } else {
-      headers[name] = value;
     }
+  }
        + +
        • + + +
      • +
        + +
        + +
        +
          +
        • If there are multiple Cookie header fields after decompression, these MUST be concatenated +into a single octet string using the two octet delimiter of 0x3B, 0x20 (the ASCII +string "; ").
          • +
        + +
        + + 
          if (('cookie' in headers) && (headers['cookie'] instanceof Array)) {
+    headers['cookie'] = headers['cookie'].join('; ')
   }
 
   return headers;
@@ -2179,11 +2286,11 @@ lost, but the API becomes simpler.
        • -
      • +
      • - +

        When a frame arrives

        @@ -2194,11 +2301,11 @@ lost, but the API becomes simpler.

        • -
      • +
      • - +
        • and the collection process is already _inProgress, the frame is simply stored, except if @@ -2219,11 +2326,11 @@ it's an illegal frame
          • -
        • +
        • - +
          • and the collection process is not _inProgress, but the new frame's type is HEADERS or @@ -2234,18 +2341,18 @@ PUSH_PROMISE, a new collection process begins
            •   else if ((frame.type === 'HEADERS') || (frame.type === 'PUSH_PROMISE')) {
     this._inProgress = true;
-    this._base = frame;
+    this._base = util._extend({}, frame);
     this._frames = [frame];
   }
            -
          • +
          • - +
            • otherwise, the frame is forwarded without taking any action
              • @@ -2260,11 +2367,11 @@ PUSH_PROMISE, a new collection process begins -
            • +
            • - +
              • When the frame signals that it's the last in the series, the header block chunks are @@ -2285,7 +2392,7 @@ decompressed headers.
                • this.emit('error', 'COMPRESSION_ERROR'); return; } - this.push(util._extend({ headers: headers }, this._base)); + this.push(util._extend(this._base, { headers: headers })); this._inProgress = false; } @@ -2295,11 +2402,11 @@ decompressed headers. -
              • +
              • - +

                Helper functions

                @@ -2308,11 +2415,11 @@ decompressed headers.
                • -
              • +
              • - +

                Concatenate an array of buffers into a new buffer

                @@ -2335,11 +2442,11 @@ decompressed headers.
                • -
              • +
              • - +

                Cut buffer into chunks not larger than size

                @@ -2354,6 +2461,10 @@ decompressed headers.
                • cursor += chunkSize; } while(cursor < buffer.length); return chunks; +} + +function trim(string) { + return string.trim() }
            • diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/flow.html b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/flow.html index 1efe43b9905..b1e6fdfbcef 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/flow.html +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/flow.html @@ -135,7 +135,7 @@ exports.Flow = Flow;

      • Event: 'error' (type): signals an error

      • setInitialWindow(size): the initial flow control window size can be changed any time -(as described in the standard) using this method

        +(as described in the standard) using this method

      • disableRemoteFlowControl(): sends a WINDOW_UPDATE signaling that we don't want flow control

        • diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/framer.html b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/framer.html index 56ed094de89..b4506f74786 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/framer.html +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/framer.html @@ -340,7 +340,7 @@ will also run.

        -

        Frame Header

        +

        Frame Header

        @@ -484,7 +484,7 @@ Deserializer.commonHeader = functio
      • typeSpecificAttributes: a register of frame specific frame object attributes (used by logging code and also serves as documentation for frame objects)
      -

      DATA Frames

      +

      DATA Frames

      @@ -533,7 +533,7 @@ Deserializer.DATA = function
      -

      HEADERS

      +

      HEADERS

      @@ -618,7 +618,7 @@ Deserializer.HEADERS = function -

      PRIORITY

      +

      PRIORITY

      @@ -679,7 +679,7 @@ Deserializer.PRIORITY = function -

      RST_STREAM

      +

      RST_STREAM

      @@ -743,7 +743,7 @@ Deserializer.RST_STREAM = function<
      -

      SETTINGS

      +

      SETTINGS

      @@ -957,7 +957,7 @@ bits are reserved.
      -

      PUSH_PROMISE

      +

      PUSH_PROMISE

      @@ -1034,7 +1034,7 @@ Deserializer.PUSH_PROMISE = functio
      -

      PING

      +

      PING

      @@ -1096,7 +1096,7 @@ Deserializer.PING = function
      -

      GOAWAY

      +

      GOAWAY

      @@ -1172,7 +1172,7 @@ Deserializer.GOAWAY = function -

      WINDOW_UPDATE

      +

      WINDOW_UPDATE

      @@ -1235,7 +1235,7 @@ Deserializer.WINDOW_UPDATE = functi
      -

      CONTINUATION

      +

      CONTINUATION

      @@ -1281,7 +1281,7 @@ Deserializer.CONTINUATION = functio
      -

      Error Codes

      +

      Error Codes

      diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/index.html b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/index.html index 90190ab9312..8d0a58c948f 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/index.html +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/index.html @@ -73,14 +73,14 @@
      -

      node-http2-protocol is an implementation of the HTTP/2 (draft 06) +

      node-http2-protocol is an implementation of the HTTP/2 (draft 09) framing layer for node.js.

      The main building blocks are node.js streams that are connected through pipes.

      The main components are:

      • Endpoint: represents an HTTP/2 endpoint (client or server). It's responsible for the the first part of the handshake process (sending/receiving the -connection header) and manages other components (framer, compressor, +connection header) and manages other components (framer, compressor, connection, streams) that make up a client or server.

      • Connection: multiplexes the active HTTP/2 streams, manages connection @@ -88,7 +88,7 @@ lifecycle and settings, and responsible for enforcing the connection level limit control, initiated stream limit)

      • Stream: implementation of the HTTP/2 stream concept. -Implements the stream state machine defined by the standard, provides +Implements the stream state machine defined by the standard, provides management methods and events for using the stream (sending/receiving headers, data, etc.), and enforces stream level constraints (flow control, sending only legal frames).

        • diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/stream.html b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/stream.html index e713f200dda..2054f95c6c6 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/stream.html +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/doc/stream.html @@ -769,7 +769,7 @@ Stream.prototype._finishing = funct
        -

        Stream States

        +

        Stream States

        diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/compressor.js b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/compressor.js index 5c3c774658f..0c04b9c164b 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/compressor.js +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/compressor.js @@ -13,7 +13,7 @@ // // [node-transform]: http://nodejs.org/api/stream.html#stream_class_stream_transform // [node-objectmode]: http://nodejs.org/api/stream.html#stream_new_stream_readable_options -// [http2-compression]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04 +// [http2-compression]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05 exports.HeaderTable = HeaderTable; exports.HuffmanTable = HuffmanTable; @@ -35,8 +35,8 @@ var util = require('util'); // The [Header Table] is a component used to associate headers to index values. It is basically an // ordered list of `[name, value]` pairs, so it's implemented as a subclass of `Array`. // In this implementation, the Header Table and the [Static Table] are handled as a single table. -// [Header Table]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#section-3.1.2 -// [Static Table]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#appendix-B +// [Header Table]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#section-3.1.2 +// [Static Table]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#appendix-B function HeaderTable(log, limit) { var self = HeaderTable.staticTable.map(entryFromPair); self._log = log; @@ -59,7 +59,7 @@ function HeaderTable(log, limit) { // * Headers to be kept: headers that should not be removed as the last step of the encoding process // (not part of the spec, `keep` flag) // -// [referenceset]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#section-3.1.3 +// [referenceset]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#section-3.1.3 // // Relations of the sets: // @@ -99,7 +99,7 @@ function size(entry) { } // The `add(index, entry)` can be used to [manage the header table][tablemgmt]: -// [tablemgmt]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#section-3.3 +// [tablemgmt]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#section-3.3 // // * it pushes the new `entry` at the beggining of the table // * before doing such a modification, it has to be ensured that the header table size will stay @@ -146,9 +146,9 @@ HeaderTable.prototype.setSizeLimit = function setSizeLimit(limit) { this._enforceLimit(this._limit); }; -// [The Static Table](http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#appendix-B) +// [The Static Table](http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#appendix-B) // ------------------ -// [statictable]:http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#appendix-B +// [statictable]:http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#appendix-B // The table is generated with feeding the table from the spec to the following sed command: // @@ -191,6 +191,7 @@ HeaderTable.staticTable = [ [ 'expect' , '' ], [ 'expires' , '' ], [ 'from' , '' ], + [ 'host' , '' ], [ 'if-match' , '' ], [ 'if-modified-since' , '' ], [ 'if-none-match' , '' ], @@ -245,7 +246,7 @@ HeaderSetDecompressor.prototype._transform = function _transform(chunk, encoding }; // `execute(rep)` executes the given [header representation][representation]. -// [representation]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#section-3.1.4 +// [representation]: http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#section-3.1.4 // The *JavaScript object representation* of a header representation: // @@ -255,10 +256,13 @@ HeaderSetDecompressor.prototype._transform = function _transform(chunk, encoding // index: Boolean // with or without indexing // } // +// *Important:* to ease the indexing of the header table, indexes start at 0 instead of 1. +// // Examples: // // Indexed: // { name: 2 , value: 2 , index: false } +// { name: -1 , value: -1 , index: false } // reference set emptying // Literal: // { name: 2 , value: 'X', index: false } // without indexing // { name: 2 , value: 'Y', index: true } // with indexing @@ -269,6 +273,9 @@ HeaderSetDecompressor.prototype._execute = function _execute(rep) { var entry, pair; + // * An _indexed representation_ with an index value of 0 (in our representation, it means -1) + // entails the following actions: + // * The reference set is emptied. // * An _indexed representation_ corresponding to an entry _present_ in the reference set // entails the following actions: // * The entry is removed from the reference set. @@ -286,9 +293,17 @@ HeaderSetDecompressor.prototype._execute = function _execute(rep) { var index = rep.value; entry = this._table[index]; - if (entry.reference) { + if (index == -1) { + for (var i = 0; i < this._table.length; i++) { + this._table[i].reference = false; + } + } + + else if (entry.reference) { entry.reference = false; - } else { + } + + else { pair = entry.slice(); this.push(pair); @@ -340,7 +355,7 @@ HeaderSetDecompressor.prototype._flush = function _flush(callback) { this._execute(HeaderSetDecompressor.header(buffer, this._huffmanTable)); } - // * [emits the reference set](http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#section-3.2.2) + // * [emits the reference set](http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#section-3.2.2) for (var index = 0; index < this._table.length; index++) { var entry = this._table[index]; if (entry.reference && !entry.emitted) { @@ -431,7 +446,7 @@ HeaderSetCompressor.prototype._transform = function _transform(pair, encoding, c // header is common with the previous header set, and is still untouched. We mark it to keep // in the reference set (that means don't remove at the end of the encoding process). if (fullMatch !== -1) { - rep = { name: fullMatch, value: fullMatch, index: -1 }; + rep = { name: fullMatch, value: fullMatch, index: false }; if (!entry.reference) { if (fullMatch >= this._table.length - this._table._staticLength) { @@ -496,7 +511,7 @@ HeaderSetCompressor.prototype._flush = function _flush(callback) { for (var index = 0; index < this._table.length; index++) { var entry = this._table[index]; if (entry.reference && !entry.keep && !entry.emitted) { - this.send({ name: index, value: index, index: -1 }); + this.send({ name: index, value: index, index: false }); entry.reference = false; } entry.keep = false; @@ -506,7 +521,7 @@ HeaderSetCompressor.prototype._flush = function _flush(callback) { callback(); }; -// [Detailed Format](http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-04#section-4) +// [Detailed Format](http://tools.ietf.org/html/draft-ietf-httpbis-header-compression-05#section-4) // ----------------- // ### Integer representation ### @@ -1349,16 +1364,16 @@ HeaderSetCompressor.header = function writeHeader(header, huffmanTable) { } if (representation === representations.indexed) { - buffers.push(HeaderSetCompressor.integer(header.value, representation.prefix)); + buffers.push(HeaderSetCompressor.integer(header.value + 1, representation.prefix)); + } - } else { + else { if (typeof header.name === 'number') { buffers.push(HeaderSetCompressor.integer(header.name + 1, representation.prefix)); } else { buffers.push(HeaderSetCompressor.integer(0, representation.prefix)); buffers.push(HeaderSetCompressor.string(header.name, huffmanTable)); } - buffers.push(HeaderSetCompressor.string(header.value, huffmanTable)); } @@ -1380,17 +1395,16 @@ HeaderSetDecompressor.header = function readHeader(buffer, huffmanTable) { } if (representation === representations.indexed) { - header.value = header.name = HeaderSetDecompressor.integer(buffer, representation.prefix); + header.value = header.name = HeaderSetDecompressor.integer(buffer, representation.prefix) - 1; header.index = false; + } - } else { + else { header.name = HeaderSetDecompressor.integer(buffer, representation.prefix) - 1; if (header.name === -1) { header.name = HeaderSetDecompressor.string(buffer, huffmanTable); } - header.value = HeaderSetDecompressor.string(buffer, huffmanTable); - header.index = (representation === representations.literalIncremental); } @@ -1449,12 +1463,35 @@ Compressor.prototype.compress = function compress(headers) { var compressor = new HeaderSetCompressor(this._log, this._table, this._huffmanTable); for (var name in headers) { var value = headers[name]; + name = String(name).toLowerCase(); + + // * To allow for better compression efficiency, the Cookie header field MAY be split into + // separate header fields, each with one or more cookie-pairs. + if (name == 'cookie') { + if (!(value instanceof Array)) { + value = [value] + } + value = Array.prototype.concat.apply([], value.map(function(cookie) { + return String(cookie).split(';').map(trim) + })); + } + + // * To preserve the order of a comma-separated list, the ordered values for a single header + // field name appearing in different header fields are concatenated into a single value. + // A zero-valued octet (0x0) is used to delimit multiple values. + // * Header fields containing multiple values MUST be concatenated into a single value unless + // the ordering of that header field is known to be not significant. + // * Currently, only the Cookie header is considered to be order-insensitive. + if ((value instanceof Array) && (name !== 'cookie')) { + value = value.join('\0'); + } + if (value instanceof Array) { - for (var i = 0; i< value.length; i++) { - compressor.write([String(name), String(value[i])]); + for (var i = 0; i < value.length; i++) { + compressor.write([name, String(value[i])]); } } else { - compressor.write([String(name), String(value)]); + compressor.write([name, String(value)]); } } compressor.end(); @@ -1550,18 +1587,30 @@ Decompressor.prototype.decompress = function decompress(block) { var pair; while (pair = decompressor.read()) { var name = pair[0]; - var value = pair[1]; - if (name in headers) { - if (headers[name] instanceof Array) { - headers[name].push(value); + // * After decompression, header fields that have values containing zero octets (0x0) MUST be + // split into multiple header fields before being processed. + var values = pair[1].split('\0'); + for (var i = 0; i < values.length; i++) { + var value = values[i]; + if (name in headers) { + if (headers[name] instanceof Array) { + headers[name].push(value); + } else { + headers[name] = [headers[name], value]; + } } else { - headers[name] = [headers[name], value]; + headers[name] = value; } - } else { - headers[name] = value; } } + // * If there are multiple Cookie header fields after decompression, these MUST be concatenated + // into a single octet string using the two octet delimiter of 0x3B, 0x20 (the ASCII + // string "; "). + if (('cookie' in headers) && (headers['cookie'] instanceof Array)) { + headers['cookie'] = headers['cookie'].join('; ') + } + return headers; }; @@ -1582,7 +1631,7 @@ Decompressor.prototype._transform = function _transform(frame, encoding, done) { // PUSH_PROMISE, a new collection process begins else if ((frame.type === 'HEADERS') || (frame.type === 'PUSH_PROMISE')) { this._inProgress = true; - this._base = frame; + this._base = util._extend({}, frame); this._frames = [frame]; } @@ -1605,7 +1654,7 @@ Decompressor.prototype._transform = function _transform(frame, encoding, done) { this.emit('error', 'COMPRESSION_ERROR'); return; } - this.push(util._extend({ headers: headers }, this._base)); + this.push(util._extend(this._base, { headers: headers })); this._inProgress = false; } @@ -1641,3 +1690,7 @@ function cut(buffer, size) { } while(cursor < buffer.length); return chunks; } + +function trim(string) { + return string.trim() +} diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/flow.js b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/flow.js index f5b19af62b6..108c840613d 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/flow.js +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/flow.js @@ -23,7 +23,7 @@ exports.Flow = Flow; // // * **disableLocalFlowControl()**: disables flow control for outgoing frames // -// [1]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-04#section-6.9.2 +// [1]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.9.2 // API for child classes // --------------------- diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/framer.js b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/framer.js index acecf9ef22b..b2f00f123b0 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/framer.js +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/framer.js @@ -143,7 +143,7 @@ Deserializer.prototype._transform = function _transform(chunk, encoding, done) { done(); }; -// [Frame Header](http://http2.github.io/http2-spec/#FrameHeader) +// [Frame Header](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-4.1) // -------------------------------------------------------------- // // HTTP/2.0 frames share a common base format consisting of an 8-byte header followed by 0 to 65535 @@ -259,7 +259,7 @@ Deserializer.commonHeader = function readCommonHeader(buffer, frame) { // * `typeSpecificAttributes`: a register of frame specific frame object attributes (used by // logging code and also serves as documentation for frame objects) -// [DATA Frames](http://http2.github.io/http2-spec/#DataFrames) +// [DATA Frames](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.1) // ------------------------------------------------------------ // // DATA frames (type=0x0) convey arbitrary, variable-length sequences of octets associated with a @@ -287,7 +287,7 @@ Deserializer.DATA = function readData(buffer, frame) { frame.data = buffer; }; -// [HEADERS](http://http2.github.io/http2-spec/#HEADERS) +// [HEADERS](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.2) // -------------------------------------------------------------- // // The HEADERS frame (type=0x1) allows the sender to create a stream. @@ -341,7 +341,7 @@ Deserializer.HEADERS = function readHeadersPriority(buffer, frame) { } }; -// [PRIORITY](http://http2.github.io/http2-spec/#PRIORITY) +// [PRIORITY](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.3) // ------------------------------------------------------- // // The PRIORITY frame (type=0x2) specifies the sender-advised priority of a stream. @@ -372,7 +372,7 @@ Deserializer.PRIORITY = function readPriority(buffer, frame) { frame.priority = buffer.readUInt32BE(0); }; -// [RST_STREAM](http://http2.github.io/http2-spec/#RST_STREAM) +// [RST_STREAM](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.4) // ----------------------------------------------------------- // // The RST_STREAM frame (type=0x3) allows for abnormal termination of a stream. @@ -406,7 +406,7 @@ Deserializer.RST_STREAM = function readRstStream(buffer, frame) { frame.error = errorCodes[buffer.readUInt32BE(0)]; }; -// [SETTINGS](http://http2.github.io/http2-spec/#SETTINGS) +// [SETTINGS](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.5) // ------------------------------------------------------- // // The SETTINGS frame (type=0x4) conveys configuration parameters that affect how endpoints @@ -507,7 +507,7 @@ definedSettings[7] = { name: 'SETTINGS_INITIAL_WINDOW_SIZE', flag: false }; // bits are reserved. definedSettings[10] = { name: 'SETTINGS_FLOW_CONTROL_OPTIONS', flag: true }; -// [PUSH_PROMISE](http://http2.github.io/http2-spec/#PUSH_PROMISE) +// [PUSH_PROMISE](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.6) // --------------------------------------------------------------- // // The PUSH_PROMISE frame (type=0x5) is used to notify the peer endpoint in advance of streams the @@ -553,7 +553,7 @@ Deserializer.PUSH_PROMISE = function readPushPromise(buffer, frame) { frame.data = buffer.slice(4); }; -// [PING](http://http2.github.io/http2-spec/#PING) +// [PING](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.7) // ----------------------------------------------- // // The PING frame (type=0x6) is a mechanism for measuring a minimal round-trip time from the @@ -583,7 +583,7 @@ Deserializer.PING = function readPing(buffer, frame) { frame.data = buffer; }; -// [GOAWAY](http://http2.github.io/http2-spec/#GOAWAY) +// [GOAWAY](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.8) // --------------------------------------------------- // // The GOAWAY frame (type=0x7) informs the remote peer to stop creating streams on this connection. @@ -630,7 +630,7 @@ Deserializer.GOAWAY = function readGoaway(buffer, frame) { frame.error = errorCodes[buffer.readUInt32BE(4)]; }; -// [WINDOW_UPDATE](http://http2.github.io/http2-spec/#WINDOW_UPDATE) +// [WINDOW_UPDATE](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.9) // ----------------------------------------------------------------- // // The WINDOW_UPDATE frame (type=0x9) is used to implement flow control. @@ -662,7 +662,7 @@ Deserializer.WINDOW_UPDATE = function readWindowUpdate(buffer, frame) { frame.window_size = buffer.readUInt32BE(0) & 0x7fffffff; }; -// [CONTINUATION](http://http2.github.io/http2-spec/#CONTINUATION) +// [CONTINUATION](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-6.10) // ------------------------------------------------------------ // // The CONTINUATION frame (type=0xA) is used to continue a sequence of header block fragments. @@ -687,7 +687,7 @@ Deserializer.CONTINUATION = function readContinuation(buffer, frame) { frame.data = buffer; }; -// [Error Codes](http://http2.github.io/http2-spec/#ErrorCodes) +// [Error Codes](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-7) // ------------------------------------------------------------ var errorCodes = [ diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/index.js b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/index.js index d3be5cfc6c4..f4892f47750 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/index.js +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/index.js @@ -1,4 +1,4 @@ -// [node-http2-protocol][homepage] is an implementation of the [HTTP/2 (draft 06)][http2] +// [node-http2-protocol][homepage] is an implementation of the [HTTP/2 (draft 09)][http2] // framing layer for [node.js][node]. // // The main building blocks are [node.js streams][node-stream] that are connected through pipes. @@ -28,10 +28,10 @@ // between the binary and the JavaScript object representation of HTTP/2 frames // // [homepage]: https://github.com/molnarg/node-http2 -// [http2]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-06 -// [http2-connheader]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-06#section-3.5 -// [http2-stream]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-06#section-5 -// [http2-streamstate]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-06#section-5.1 +// [http2]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09 +// [http2-connheader]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-3.5 +// [http2-stream]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-5 +// [http2-streamstate]: http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-5.1 // [node]: http://nodejs.org/ // [node-stream]: http://nodejs.org/api/stream.html // [node-https]: http://nodejs.org/api/https.html diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/stream.js b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/stream.js index e923274b733..1e92ca24d54 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/stream.js +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/lib/stream.js @@ -322,7 +322,7 @@ Stream.prototype._finishing = function _finishing() { } }; -// [Stream States](http://tools.ietf.org/id/draft-unicorn-httpbis-http2-01.html#StreamStates) +// [Stream States](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-5.1) // ---------------- // // +--------+ diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/package.json b/testing/xpcshell/node-http2/node_modules/http2-protocol/package.json index 2580cf83448..42cde6ce49f 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/package.json +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/package.json @@ -1,6 +1,6 @@ { "name": "http2-protocol", - "version": "0.7.0", + "version": "0.9.0", "description": "A JavaScript implementation of the HTTP/2 framing layer", "main": "lib/index.js", "engines": { @@ -46,7 +46,7 @@ ], "license": "MIT", "readmeFilename": "README.md", - "readme": "node-http2-protocol\n===================\n\nAn HTTP/2 ([draft-ietf-httpbis-http2-07](http://tools.ietf.org/html/draft-ietf-httpbis-http2-07))\nframing layer implementaion for node.js.\n\nInstallation\n------------\n\n```\nnpm install http2-protocol\n```\n\nExamples\n--------\n\nAPI\n---\n\nDevelopment\n-----------\n\n### Development dependencies ###\n\nThere's a few library you will need to have installed to do anything described in the following\nsections. After installing/cloning node-http2, run `npm install` in its directory to install\ndevelopment dependencies.\n\nUsed libraries:\n\n* [mocha](http://visionmedia.github.io/mocha/) for tests\n* [chai](http://chaijs.com/) for assertions\n* [istanbul](https://github.com/gotwarlost/istanbul) for code coverage analysis\n* [docco](http://jashkenas.github.io/docco/) for developer documentation\n* [bunyan](https://github.com/trentm/node-bunyan) for logging\n\nFor pretty printing logs, you will also need a global install of bunyan (`npm install -g bunyan`).\n\n### Developer documentation ###\n\nThe developer documentation is located in the `doc` directory. The docs are usually updated only\nbefore releasing a new version. To regenerate them manually, run `npm run-script prepublish`.\nThere's a hosted version which is located [here](http://molnarg.github.io/node-http2/doc/).\n\n### Running the tests ###\n\nIt's easy, just run `npm test`. The tests are written in BDD style, so they are a good starting\npoint to understand the code.\n\n### Test coverage ###\n\nTo generate a code coverage report, run `npm test --coverage` (it may be slow, be patient).\nCode coverage summary as of version 0.6.0:\n```\nStatements : 92.39% ( 1165/1261 )\nBranches : 86.57% ( 477/551 )\nFunctions : 91.22% ( 135/148 )\nLines : 92.35% ( 1159/1255 )\n```\n\nThere's a hosted version of the detailed (line-by-line) coverage report\n[here](http://molnarg.github.io/node-http2-protocol/coverage/lcov-report/lib/).\n\n### Logging ###\n\nContributors\n------------\n\nCode contributions are always welcome! People who contributed to node-http2 so far:\n\n* Nick Hurley\n* Mike Belshe\n\nSpecial thanks to Google for financing the development of this module as part of their [Summer of\nCode program](https://developers.google.com/open-source/soc/) (project: [HTTP/2 prototype server\nimplementation](https://google-melange.appspot.com/gsoc/project/google/gsoc2013/molnarg/5001)), and\nNick Hurley of Mozilla, my GSoC mentor, who helped with regular code review and technical advices.\n\nLicense\n-------\n\nThe MIT License\n\nCopyright (C) 2013 Gábor Molnár \n", - "_id": "http2-protocol@0.7.0", - "_from": "http2-protocol@0.7.x" + "readme": "node-http2-protocol\n===================\n\nAn HTTP/2 ([draft-ietf-httpbis-http2-09](http://tools.ietf.org/html/draft-ietf-httpbis-http2-09))\nframing layer implementaion for node.js.\n\nInstallation\n------------\n\n```\nnpm install http2-protocol\n```\n\nExamples\n--------\n\nAPI\n---\n\nDevelopment\n-----------\n\n### Development dependencies ###\n\nThere's a few library you will need to have installed to do anything described in the following\nsections. After installing/cloning node-http2, run `npm install` in its directory to install\ndevelopment dependencies.\n\nUsed libraries:\n\n* [mocha](http://visionmedia.github.io/mocha/) for tests\n* [chai](http://chaijs.com/) for assertions\n* [istanbul](https://github.com/gotwarlost/istanbul) for code coverage analysis\n* [docco](http://jashkenas.github.io/docco/) for developer documentation\n* [bunyan](https://github.com/trentm/node-bunyan) for logging\n\nFor pretty printing logs, you will also need a global install of bunyan (`npm install -g bunyan`).\n\n### Developer documentation ###\n\nThe developer documentation is located in the `doc` directory. The docs are usually updated only\nbefore releasing a new version. To regenerate them manually, run `npm run-script prepublish`.\nThere's a hosted version which is located [here](http://molnarg.github.io/node-http2-protocol/doc/).\n\n### Running the tests ###\n\nIt's easy, just run `npm test`. The tests are written in BDD style, so they are a good starting\npoint to understand the code.\n\n### Test coverage ###\n\nTo generate a code coverage report, run `npm test --coverage` (it may be slow, be patient).\nCode coverage summary as of version 0.6.0:\n```\nStatements : 92.43% ( 1257/1360 )\nBranches : 86.36% ( 500/579 )\nFunctions : 90.12% ( 146/162 )\nLines : 92.39% ( 1251/1354 )\n```\n\nThere's a hosted version of the detailed (line-by-line) coverage report\n[here](http://molnarg.github.io/node-http2-protocol/coverage/lcov-report/lib/).\n\n### Logging ###\n\nContributors\n------------\n\nCode contributions are always welcome! People who contributed to node-http2 so far:\n\n* Nick Hurley\n* Mike Belshe\n\nSpecial thanks to Google for financing the development of this module as part of their [Summer of\nCode program](https://developers.google.com/open-source/soc/) (project: [HTTP/2 prototype server\nimplementation](https://google-melange.appspot.com/gsoc/project/google/gsoc2013/molnarg/5001)), and\nNick Hurley of Mozilla, my GSoC mentor, who helped with regular code review and technical advices.\n\nLicense\n-------\n\nThe MIT License\n\nCopyright (C) 2013 Gábor Molnár \n", + "_id": "http2-protocol@0.9.0", + "_from": "http2-protocol@0.9.x" } diff --git a/testing/xpcshell/node-http2/node_modules/http2-protocol/test/compressor.js b/testing/xpcshell/node-http2/node_modules/http2-protocol/test/compressor.js index da3bcfbf0ca..e9f7f48481f 100644 --- a/testing/xpcshell/node-http2/node_modules/http2-protocol/test/compressor.js +++ b/testing/xpcshell/node-http2/node_modules/http2-protocol/test/compressor.js @@ -158,14 +158,14 @@ var test_headers = [{ value: 3, index: false }, - buffer: new Buffer('83', 'hex') + buffer: new Buffer('84', 'hex') }, { header: { name: 5, value: 5, index: false }, - buffer: new Buffer('85', 'hex') + buffer: new Buffer('86', 'hex') }, { header: { name: 4, @@ -186,14 +186,21 @@ var test_headers = [{ value: 2, index: false }, - buffer: new Buffer('82', 'hex') + buffer: new Buffer('83', 'hex') }, { header: { name: 6, value: 6, index: false }, - buffer: new Buffer('86', 'hex') + buffer: new Buffer('87', 'hex') +}, { + header: { + name: -1, + value: -1, + index: false + }, + buffer: new Buffer('80', 'hex') }]; var test_header_sets = [{ @@ -231,11 +238,15 @@ var test_header_sets = [{ 'custom-key': 'custom-value' }, buffer: test_headers[3].buffer +}, { + headers: {}, + buffer: test_headers[13].buffer }, { headers: { ':status': '200', 'user-agent': 'my-user-agent', - 'cookie': ['first', 'second', 'third', 'third'], + 'cookie': 'first; second; third; third; fourth', + 'multiple': ['first', 'second', 'third', 'third; fourth'], 'verylong': (new Buffer(9000)).toString('hex') } }]; @@ -343,7 +354,7 @@ describe('compressor.js', function() { describe('method decompress(buffer)', function() { it('should return the parsed header set in { name1: value1, name2: [value2, value3], ... } format', function() { var decompressor = new Decompressor(util.log, 'REQUEST'); - for (var i = 0; i < 4; i++) { + for (var i = 0; i < 5; i++) { var header_set = test_header_sets[i]; expect(decompressor.decompress(header_set.buffer)).to.deep.equal(header_set.headers); } diff --git a/testing/xpcshell/node-http2/package.json b/testing/xpcshell/node-http2/package.json index 5ac6620c20b..bed96b428e6 100644 --- a/testing/xpcshell/node-http2/package.json +++ b/testing/xpcshell/node-http2/package.json @@ -1,13 +1,13 @@ { "name": "http2", - "version": "2.1.0", + "version": "2.2.0", "description": "An HTTP/2 client and server implementation", "main": "lib/index.js", "engines": { "node": ">=0.10.19" }, "dependencies": { - "http2-protocol": "0.7.x" + "http2-protocol": "0.9.x" }, "devDependencies": { "istanbul": "*", @@ -49,7 +49,7 @@ ], "license": "MIT", "readmeFilename": "README.md", - "readme": "node-http2\n==========\n\nAn HTTP/2 ([draft-ietf-httpbis-http2-07](http://tools.ietf.org/html/draft-ietf-httpbis-http2-76))\nclient and server implementation for node.js.\n\nInstallation\n------------\n\n```\nnpm install http2\n```\n\nAPI\n---\n\nThe API is very similar to the [standard node.js HTTPS API](http://nodejs.org/api/https.html). The\ngoal is the perfect API compatibility, with additional HTTP2 related extensions (like server push).\n\nDetailed API documentation is primarily maintained in the `lib/http.js` file and is [available in\nthe wiki](https://github.com/molnarg/node-http2/wiki/Public-API) as well.\n\nExamples\n--------\n\n### Using as a server ###\n\n```javascript\nvar options = {\n key: fs.readFileSync('./example/localhost.key'),\n cert: fs.readFileSync('./example/localhost.crt')\n};\n\nrequire('http2').createServer(options, function(request, response) {\n response.end('Hello world!');\n}).listen(8080);\n```\n\n### Using as a client ###\n\n```javascript\nprocess.env.NODE_TLS_REJECT_UNAUTHORIZED = \"0\";\n\nrequire('http2').get('https://localhost:8080/', function(response) {\n response.pipe(process.stdout);\n});\n```\n\n### Simple static file server ###\n\nAn simple static file server serving up content from its own directory is available in the `example`\ndirectory. Running the server:\n\n```bash\n$ node ./example/server.js\n```\n\n### Simple command line client ###\n\nAn example client is also available. Downloading the server's own source code from the server:\n\n```bash\n$ node ./example/client.js 'https://localhost:8080/server.js' >/tmp/server.js\n```\n\n### Server push ###\n\nFor a server push example, see the source code of the example\n[server](https://github.com/molnarg/node-http2/blob/master/example/server.js) and\n[client](https://github.com/molnarg/node-http2/blob/master/example/client.js).\n\nStatus\n------\n\n* ALPN is not yet supported in node.js (see\n [this issue](https://github.com/joyent/node/issues/5945)). For ALPN support, you will have to use\n [Shigeki Ohtsu's node.js fork](https://github.com/shigeki/node/tree/alpn_support) until this code\n gets merged upstream.\n* Upgrade mechanism to start HTTP/2 over unencrypted channel is not implemented yet\n (issue [#4](https://github.com/molnarg/node-http2/issues/4))\n* Other minor features found in\n [this list](https://github.com/molnarg/node-http2/issues?labels=feature) are not implemented yet\n\nDevelopment\n-----------\n\n### Development dependencies ###\n\nThere's a few library you will need to have installed to do anything described in the following\nsections. After installing/cloning node-http2, run `npm install` in its directory to install\ndevelopment dependencies.\n\nUsed libraries:\n\n* [mocha](http://visionmedia.github.io/mocha/) for tests\n* [chai](http://chaijs.com/) for assertions\n* [istanbul](https://github.com/gotwarlost/istanbul) for code coverage analysis\n* [docco](http://jashkenas.github.io/docco/) for developer documentation\n* [bunyan](https://github.com/trentm/node-bunyan) for logging\n\nFor pretty printing logs, you will also need a global install of bunyan (`npm install -g bunyan`).\n\n### Developer documentation ###\n\nThe developer documentation is located in the `doc` directory. The docs are usually updated only\nbefore releasing a new version. To regenerate them manually, run `npm run-script prepublish`.\nThere's a hosted version which is located [here](http://molnarg.github.io/node-http2/doc/).\n\n### Running the tests ###\n\nIt's easy, just run `npm test`. The tests are written in BDD style, so they are a good starting\npoint to understand the code.\n\n### Test coverage ###\n\nTo generate a code coverage report, run `npm test --coverage` (which runs very slowly, be patient).\nCode coverage summary as of version 1.0.1:\n```\nStatements : 93.26% ( 1563/1676 )\nBranches : 84.85% ( 605/713 )\nFunctions : 94.81% ( 201/212 )\nLines : 93.23% ( 1557/1670 )\n```\n\nThere's a hosted version of the detailed (line-by-line) coverage report\n[here](http://molnarg.github.io/node-http2/coverage/lcov-report/lib/).\n\n### Logging ###\n\nLogging is turned off by default. You can turn it on by passing a bunyan logger as `log` option when\ncreating a server or agent.\n\nWhen using the example server or client, it's very easy to turn logging on: set the `HTTP2_LOG`\nenvironment variable to `fatal`, `error`, `warn`, `info`, `debug` or `trace` (the logging level).\nTo log every single incoming and outgoing data chunk, use `HTTP2_LOG_DATA=1` besides\n`HTTP2_LOG=trace`. Log output goes to the standard error output. If the standard error is redirected\ninto a file, then the log output is in bunyan's JSON format for easier post-mortem analysis.\n\nRunning the example server and client with `info` level logging output:\n\n```bash\n$ HTTP2_LOG=info node ./example/server.js\n```\n\n```bash\n$ HTTP2_LOG=info node ./example/client.js 'http://localhost:8080/server.js' >/dev/null\n```\n\nContributors\n------------\n\nCode contributions are always welcome! People who contributed to node-http2 so far:\n\n* Nick Hurley\n* Mike Belshe\n\nSpecial thanks to Google for financing the development of this module as part of their [Summer of\nCode program](https://developers.google.com/open-source/soc/) (project: [HTTP/2 prototype server\nimplementation](https://google-melange.appspot.com/gsoc/project/google/gsoc2013/molnarg/5001)), and\nNick Hurley of Mozilla, my GSoC mentor, who helped with regular code review and technical advices.\n\nLicense\n-------\n\nThe MIT License\n\nCopyright (C) 2013 Gábor Molnár \n", - "_id": "http2@2.1.0", + "readme": "node-http2\n==========\n\nAn HTTP/2 ([draft-ietf-httpbis-http2-09](http://tools.ietf.org/html/draft-ietf-httpbis-http2-9))\nclient and server implementation for node.js.\n\nInstallation\n------------\n\n```\nnpm install http2\n```\n\nAPI\n---\n\nThe API is very similar to the [standard node.js HTTPS API](http://nodejs.org/api/https.html). The\ngoal is the perfect API compatibility, with additional HTTP2 related extensions (like server push).\n\nDetailed API documentation is primarily maintained in the `lib/http.js` file and is [available in\nthe wiki](https://github.com/molnarg/node-http2/wiki/Public-API) as well.\n\nExamples\n--------\n\n### Using as a server ###\n\n```javascript\nvar options = {\n key: fs.readFileSync('./example/localhost.key'),\n cert: fs.readFileSync('./example/localhost.crt')\n};\n\nrequire('http2').createServer(options, function(request, response) {\n response.end('Hello world!');\n}).listen(8080);\n```\n\n### Using as a client ###\n\n```javascript\nprocess.env.NODE_TLS_REJECT_UNAUTHORIZED = \"0\";\n\nrequire('http2').get('https://localhost:8080/', function(response) {\n response.pipe(process.stdout);\n});\n```\n\n### Simple static file server ###\n\nAn simple static file server serving up content from its own directory is available in the `example`\ndirectory. Running the server:\n\n```bash\n$ node ./example/server.js\n```\n\n### Simple command line client ###\n\nAn example client is also available. Downloading the server's own source code from the server:\n\n```bash\n$ node ./example/client.js 'https://localhost:8080/server.js' >/tmp/server.js\n```\n\n### Server push ###\n\nFor a server push example, see the source code of the example\n[server](https://github.com/molnarg/node-http2/blob/master/example/server.js) and\n[client](https://github.com/molnarg/node-http2/blob/master/example/client.js).\n\nStatus\n------\n\n* ALPN is not yet supported in node.js (see\n [this issue](https://github.com/joyent/node/issues/5945)). For ALPN support, you will have to use\n [Shigeki Ohtsu's node.js fork](https://github.com/shigeki/node/tree/alpn_support) until this code\n gets merged upstream.\n* Upgrade mechanism to start HTTP/2 over unencrypted channel is not implemented yet\n (issue [#4](https://github.com/molnarg/node-http2/issues/4))\n* Other minor features found in\n [this list](https://github.com/molnarg/node-http2/issues?labels=feature) are not implemented yet\n\nDevelopment\n-----------\n\n### Development dependencies ###\n\nThere's a few library you will need to have installed to do anything described in the following\nsections. After installing/cloning node-http2, run `npm install` in its directory to install\ndevelopment dependencies.\n\nUsed libraries:\n\n* [mocha](http://visionmedia.github.io/mocha/) for tests\n* [chai](http://chaijs.com/) for assertions\n* [istanbul](https://github.com/gotwarlost/istanbul) for code coverage analysis\n* [docco](http://jashkenas.github.io/docco/) for developer documentation\n* [bunyan](https://github.com/trentm/node-bunyan) for logging\n\nFor pretty printing logs, you will also need a global install of bunyan (`npm install -g bunyan`).\n\n### Developer documentation ###\n\nThe developer documentation is located in the `doc` directory. The docs are usually updated only\nbefore releasing a new version. To regenerate them manually, run `npm run-script prepublish`.\nThere's a hosted version which is located [here](http://molnarg.github.io/node-http2/doc/).\n\n### Running the tests ###\n\nIt's easy, just run `npm test`. The tests are written in BDD style, so they are a good starting\npoint to understand the code.\n\n### Test coverage ###\n\nTo generate a code coverage report, run `npm test --coverage` (which runs very slowly, be patient).\nCode coverage summary as of version 1.0.1:\n```\nStatements : 93.26% ( 1563/1676 )\nBranches : 84.85% ( 605/713 )\nFunctions : 94.81% ( 201/212 )\nLines : 93.23% ( 1557/1670 )\n```\n\nThere's a hosted version of the detailed (line-by-line) coverage report\n[here](http://molnarg.github.io/node-http2/coverage/lcov-report/lib/).\n\n### Logging ###\n\nLogging is turned off by default. You can turn it on by passing a bunyan logger as `log` option when\ncreating a server or agent.\n\nWhen using the example server or client, it's very easy to turn logging on: set the `HTTP2_LOG`\nenvironment variable to `fatal`, `error`, `warn`, `info`, `debug` or `trace` (the logging level).\nTo log every single incoming and outgoing data chunk, use `HTTP2_LOG_DATA=1` besides\n`HTTP2_LOG=trace`. Log output goes to the standard error output. If the standard error is redirected\ninto a file, then the log output is in bunyan's JSON format for easier post-mortem analysis.\n\nRunning the example server and client with `info` level logging output:\n\n```bash\n$ HTTP2_LOG=info node ./example/server.js\n```\n\n```bash\n$ HTTP2_LOG=info node ./example/client.js 'http://localhost:8080/server.js' >/dev/null\n```\n\nContributors\n------------\n\nCode contributions are always welcome! People who contributed to node-http2 so far:\n\n* Nick Hurley\n* Mike Belshe\n\nSpecial thanks to Google for financing the development of this module as part of their [Summer of\nCode program](https://developers.google.com/open-source/soc/) (project: [HTTP/2 prototype server\nimplementation](https://google-melange.appspot.com/gsoc/project/google/gsoc2013/molnarg/5001)), and\nNick Hurley of Mozilla, my GSoC mentor, who helped with regular code review and technical advices.\n\nLicense\n-------\n\nThe MIT License\n\nCopyright (C) 2013 Gábor Molnár \n", + "_id": "http2@2.2.0", "_from": "http2@" }