gecko/security/nss/lib/certhigh/ocspt.h

317 lines
13 KiB
C
Raw Normal View History

2008-06-06 05:40:11 -07:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Public header for exported OCSP types.
*
* $Id: ocspt.h,v 1.9 2007/03/23 06:57:57 kaie%kuix.de Exp $
*/
#ifndef _OCSPT_H_
#define _OCSPT_H_
/*
* The following are all opaque types. If someone needs to get at
* a field within, then we need to fix the API. Try very hard not
* make the type available to them.
*/
typedef struct CERTOCSPRequestStr CERTOCSPRequest;
typedef struct CERTOCSPResponseStr CERTOCSPResponse;
/*
* XXX I think only those first two above should need to be exported,
* but until I know for certain I am leaving the rest of these here, too.
*/
typedef struct CERTOCSPCertIDStr CERTOCSPCertID;
typedef struct CERTOCSPCertStatusStr CERTOCSPCertStatus;
typedef struct CERTOCSPSingleResponseStr CERTOCSPSingleResponse;
/*
* This interface is described in terms of an HttpClient which
* supports at least a specified set of functions. (An implementer may
* provide HttpClients with additional functionality accessible only to
* users with a particular implementation in mind.) The basic behavior
* is provided by defining a set of functions, listed in an
* SEC_HttpServerFcnStruct. If the implementor of a SpecificHttpClient
* registers his SpecificHttpClient as the default HttpClient, then his
* functions will be called by the user of an HttpClient, such as an
* OCSPChecker.
*
* The implementer of a specific HttpClient (e.g., the NSS-provided
* DefaultHttpClient), populates an SEC_HttpClientFcnStruct, uses it to
* register his client, and waits for his functions to be called.
*
* For future expandability, the SEC_HttpClientFcnStruct is defined as a
* union, with the version field acting as a selector. The proposed
* initial version of the structure is given following the definition
* of the union. The HttpClientState structure is implementation-
* dependent, and should be opaque to the user.
*/
typedef void * SEC_HTTP_SERVER_SESSION;
typedef void * SEC_HTTP_REQUEST_SESSION;
/*
* This function creates a SEC_HTTP_SERVER_SESSION object. The implementer of a
* specific HttpClient will allocate the necessary space, when this
* function is called, and will free it when the corresponding FreeFcn
* is called. The SEC_HTTP_SERVER_SESSION object is passed, as an opaque object,
* to subsequent calls.
*
* If the function returns SECSuccess, the returned SEC_HTTP_SERVER_SESSION
* must be cleaned up with a call to SEC_HttpServer_FreeSession,
* after processing is finished.
*/
typedef SECStatus (*SEC_HttpServer_CreateSessionFcn)(
const char *host,
PRUint16 portnum,
SEC_HTTP_SERVER_SESSION *pSession);
/*
* This function is called to allow the implementation to attempt to keep
* the connection alive. Depending on the underlying platform, it might
* immediately return SECSuccess without having performed any operations.
* (If a connection has not been kept alive, a subsequent call to
* SEC_HttpRequest_TrySendAndReceiveFcn should reopen the connection
* automatically.)
*
* If the connection uses nonblocking I/O, this function may return
* SECWouldBlock and store a nonzero value at "pPollDesc". In that case
* the caller may wait on the poll descriptor, and should call this function
* again until SECSuccess (and a zero value at "pPollDesc") is obtained.
*/
typedef SECStatus (*SEC_HttpServer_KeepAliveSessionFcn)(
SEC_HTTP_SERVER_SESSION session,
PRPollDesc **pPollDesc);
/*
* This function frees the client SEC_HTTP_SERVER_SESSION object, closes all
* SEC_HTTP_REQUEST_SESSIONs created for that server, discards all partial results,
* frees any memory that was allocated by the client, and invalidates any
* response pointers that might have been returned by prior server or request
* functions.
*/
typedef SECStatus (*SEC_HttpServer_FreeSessionFcn)(
SEC_HTTP_SERVER_SESSION session);
/*
* This function creates a SEC_HTTP_REQUEST_SESSION object. The implementer of a
* specific HttpClient will allocate the necessary space, when this
* function is called, and will free it when the corresponding FreeFcn
* is called. The SEC_HTTP_REQUEST_SESSION object is passed, as an opaque object,
* to subsequent calls.
*
* An implementation that does not support the requested protocol variant
* (usually "http", but could eventually allow "https") or request method
* should return SECFailure.
*
* Timeout values may include the constants PR_INTERVAL_NO_TIMEOUT (wait
* forever) or PR_INTERVAL_NO_WAIT (nonblocking I/O).
*
* If the function returns SECSuccess, the returned SEC_HTTP_REQUEST_SESSION
* must be cleaned up with a call to SEC_HttpRequest_FreeSession,
* after processing is finished.
*/
typedef SECStatus (*SEC_HttpRequest_CreateFcn)(
SEC_HTTP_SERVER_SESSION session,
const char *http_protocol_variant, /* usually "http" */
const char *path_and_query_string,
const char *http_request_method,
const PRIntervalTime timeout,
SEC_HTTP_REQUEST_SESSION *pRequest);
/*
* This function sets data to be sent to the server for an HTTP request
* of http_request_method == POST. If a particular implementation
* supports it, the details for the POST request can be set by calling
* this function, prior to activating the request with TrySendAndReceiveFcn.
*
* An implementation that does not support the POST method should
* implement a SetPostDataFcn function that returns immediately.
*
* Setting http_content_type is optional, the parameter may
* by NULL or the empty string.
*/
typedef SECStatus (*SEC_HttpRequest_SetPostDataFcn)(
SEC_HTTP_REQUEST_SESSION request,
const char *http_data,
const PRUint32 http_data_len,
const char *http_content_type);
/*
* This function sets an additional HTTP protocol request header.
* If a particular implementation supports it, one or multiple headers
* can be added to the request by calling this function once or multiple
* times, prior to activating the request with TryFcn.
*
* An implementation that does not support setting additional headers
* should implement an AddRequestHeaderFcn function that returns immediately.
*/
typedef SECStatus (*SEC_HttpRequest_AddHeaderFcn)(
SEC_HTTP_REQUEST_SESSION request,
const char *http_header_name,
const char *http_header_value);
/*
* This function initiates or continues an HTTP request. After
* parameters have been set with the Create function and, optionally,
* modified or enhanced with the AddParams function, this call creates
* the socket connection and initiates the communication.
*
* If a timeout value of zero is specified, indicating non-blocking
* I/O, the client creates a non-blocking socket, and returns a status
* of SECWouldBlock and a non-NULL PRPollDesc if the operation is not
* complete. In that case all other return parameters are undefined.
* The caller is expected to repeat the call, possibly after using
* PRPoll to determine that a completion has occurred, until a return
* value of SECSuccess (and a NULL value for pPollDesc) or a return
* value of SECFailure (indicating failure on the network level)
* is obtained.
*
* http_response_data_len is both input and output parameter.
* If a pointer to a PRUint32 is supplied, the http client is
* expected to check the given integer value and always set an out
* value, even on failure.
* An input value of zero means, the caller will accept any response len.
* A different input value indicates the maximum response value acceptable
* to the caller.
* If data is successfully read and the size is acceptable to the caller,
* the function will return SECSuccess and set http_response_data_len to
* the size of the block returned in http_response_data.
* If the data read from the http server is larger than the acceptable
* size, the function will return SECFailure.
* http_response_data_len will be set to a value different from zero to
* indicate the reason of the failure.
* An out value of "0" means, the failure was unrelated to the
* acceptable size.
* An out value of "1" means, the result data is larger than the
* accpeptable size, but the real size is not yet known to the http client
* implementation and it stopped retrieving it,
* Any other out value combined with a return value of SECFailure
* will indicate the actual size of the server data.
*
* The caller is permitted to provide NULL values for any of the
* http_response arguments, indicating the caller is not interested in
* those values. If the caller does provide an address, the HttpClient
* stores at that address a pointer to the corresponding argument, at
* the completion of the operation.
*
* All returned pointers will be owned by the the HttpClient
* implementation and will remain valid until the call to
* SEC_HttpRequest_FreeFcn.
*/
typedef SECStatus (*SEC_HttpRequest_TrySendAndReceiveFcn)(
SEC_HTTP_REQUEST_SESSION request,
PRPollDesc **pPollDesc,
PRUint16 *http_response_code,
const char **http_response_content_type,
const char **http_response_headers,
const char **http_response_data,
PRUint32 *http_response_data_len);
/*
* Calling CancelFcn asks for premature termination of the request.
*
* Future calls to SEC_HttpRequest_TrySendAndReceive should
* by avoided, but in this case the HttpClient implementation
* is expected to return immediately with SECFailure.
*
* After calling CancelFcn, a separate call to SEC_HttpRequest_FreeFcn
* is still necessary to free resources.
*/
typedef SECStatus (*SEC_HttpRequest_CancelFcn)(
SEC_HTTP_REQUEST_SESSION request);
/*
* Before calling this function, it must be assured the request
* has been completed, i.e. either SEC_HttpRequest_TrySendAndReceiveFcn has
* returned SECSuccess, or the request has been canceled with
* a call to SEC_HttpRequest_CancelFcn.
*
* This function frees the client state object, closes all sockets,
* discards all partial results, frees any memory that was allocated
* by the client, and invalidates all response pointers that might
* have been returned by SEC_HttpRequest_TrySendAndReceiveFcn
*/
typedef SECStatus (*SEC_HttpRequest_FreeFcn)(
SEC_HTTP_REQUEST_SESSION request);
typedef struct SEC_HttpClientFcnV1Struct {
SEC_HttpServer_CreateSessionFcn createSessionFcn;
SEC_HttpServer_KeepAliveSessionFcn keepAliveSessionFcn;
SEC_HttpServer_FreeSessionFcn freeSessionFcn;
SEC_HttpRequest_CreateFcn createFcn;
SEC_HttpRequest_SetPostDataFcn setPostDataFcn;
SEC_HttpRequest_AddHeaderFcn addHeaderFcn;
SEC_HttpRequest_TrySendAndReceiveFcn trySendAndReceiveFcn;
SEC_HttpRequest_CancelFcn cancelFcn;
SEC_HttpRequest_FreeFcn freeFcn;
} SEC_HttpClientFcnV1;
typedef struct SEC_HttpClientFcnStruct {
PRInt16 version;
union {
SEC_HttpClientFcnV1 ftable1;
/* SEC_HttpClientFcnV2 ftable2; */
/* ... */
} fcnTable;
} SEC_HttpClientFcn;
/*
* ocspMode_FailureIsVerificationFailure:
* This is the classic behaviour of NSS.
* Any OCSP failure is a verification failure (classic mode, default).
* Without a good response, OCSP networking will be retried each time
* it is required for verifying a cert.
*
* ocspMode_FailureIsNotAVerificationFailure:
* If we fail to obtain a valid OCSP response, consider the
* cert as good.
* Failed OCSP attempts might get cached and not retried until
* minimumSecondsToNextFetchAttempt.
* If we are able to obtain a valid response, the cert
* will be considered good, if either status is "good"
* or the cert was not yet revoked at verification time.
*
* Additional failure modes might be added in the future.
*/
typedef enum {
ocspMode_FailureIsVerificationFailure = 0,
ocspMode_FailureIsNotAVerificationFailure = 1
} SEC_OcspFailureMode;
#endif /* _OCSPT_H_ */