gecko/dom/wifi/nsIWifi.idl

208 lines
7.6 KiB
Plaintext
Raw Normal View History

2012-05-21 04:12:37 -07:00
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "nsISupports.idl"
#include "nsIDOMDOMRequest.idl"
#include "nsIDOMEvent.idl"
interface nsIVariant;
[scriptable, uuid(cf1ac02b-1f39-446e-815b-651ac78d2233)]
interface nsIWifiScanResult : nsISupports {
readonly attribute DOMString ssid;
readonly attribute DOMString bssid;
const int32_t WPA_PSK = 0x01;
const int32_t WPA_EAP = 0x02;
const int32_t WEP = 0x04;
readonly attribute uint32_t capabilities;
/**
* Strength of the signal to network.
*/
readonly attribute uint32_t signalStrength;
readonly attribute uint32_t relSignalStrength;
readonly attribute boolean connected;
};
[scriptable, uuid(a6931ebf-8493-4014-90e2-99f406999982)]
interface nsIWifiScanResultsReady : nsISupports {
/**
* Callback with list of networks.
*/
void onready(in uint32_t count, [array, size_is(count)] in nsIWifiScanResult results);
/**
* Callback if scanning for networks failed after 3 retry attempts.
*/
void onfailure();
};
[scriptable, uuid(08dfefed-5c5d-4468-8c5d-2c65c24692d9)]
interface nsIWifi : nsISupports
{
/**
* Shutdown the wifi system.
*/
void shutdown();
/**
* Returns the list of currently available networks as well as the list of
* currently configured networks.
*
* On success a callback is notified with the list of networks.
* On failure after 3 scan retry attempts a callback is notified of failure.
*/
void getWifiScanResults(in nsIWifiScanResultsReady callback);
};
[scriptable, uuid(3f21012d-6e75-4632-b87c-acdd7c57fbf3)]
interface nsIDOMWifiManager : nsISupports
{
/**
* Returns the list of currently available networks.
* onsuccess: We have obtained the current list of networks. request.value
* is an object whose property names are SSIDs and values are
* network objects.
* onerror: We were unable to obtain a list of property names.
*/
nsIDOMDOMRequest getNetworks();
/**
* Returns the list of networks known to the system that will be
* automatically connected to if they're in range.
* onsuccess: request.value is an object whose property names are
* SSIDs and values are network objects.
* onerror: We were unable to obtain a list of known networks.
*/
nsIDOMDOMRequest getKnownNetworks();
/**
* Takes one of the networks returned from getNetworks and tries to
* connect to it.
* @param network A network object with information about the network,
* such as the SSID, key management desired, etc.
* onsuccess: We have started attempting to associate with the network.
* request.value is true.
* onerror: We were unable to select the network. This most likely means a
* configuration error.
*/
nsIDOMDOMRequest associate(in jsval network);
/**
* Given a network, removes it from the list of networks that we'll
* automatically connect to. In order to re-connect to the network, it is
* necessary to call associate on it.
* @param network A network object with the SSID of the network to remove.
* onsuccess: We have removed this network. If we were previously
* connected to it, we have started reconnecting to the next
* network in the list.
* onerror: We were unable to remove the network.
*/
nsIDOMDOMRequest forget(in jsval network);
/**
* Wi-Fi Protected Setup functionality.
* @param detail WPS detail which has 'method' and 'pin' field.
* The possible method field values are:
* - pbc: The Push Button Configuration.
* - pin: The PIN configuration.
* - cancel: Request to cancel WPS in progress.
* If method field is 'pin', 'pin' field can exist and has
* a PIN number.
* If method field is 'pin', 'bssid' field can exist and has
* a opposite BSSID.
* onsuccess: We have successfully started/canceled wps.
* onerror: We have failed to start/cancel wps.
*/
nsIDOMDOMRequest wps(in jsval detail);
/**
* Turn on/off wifi power saving mode.
* @param enabled true or false.
* onsuccess: We have successfully turn on/off wifi power saving mode.
* onerror: We have failed to turn on/off wifi power saving mode.
*/
nsIDOMDOMRequest setPowerSavingMode(in boolean enabled);
/**
* Given a network, configure using static IP instead of running DHCP
* @param network A network object with the SSID of the network to set static ip.
* @param info info should have following field:
* - enabled True to enable static IP, false to use DHCP
* - ipaddr configured static IP address
* - proxy configured proxy server address
* - maskLength configured mask length
* - gateway configured gateway address
* - dns1 configured first DNS server address
* - dns2 configured seconf DNS server address
* onsuccess: We have successfully configure the static ip mode.
* onerror: We have failed to configure the static ip mode.
*/
nsIDOMDOMRequest setStaticIpMode(in jsval network,
in jsval info);
/**
* Returns whether or not wifi is currently enabled.
*/
readonly attribute boolean enabled;
/**
* Returns the MAC address of the wifi adapter.
*/
readonly attribute DOMString macAddress;
/**
* An non-null object containing the following information:
* - status ("disconnected", "connecting", "associated", "connected")
* - network
*
* Note that the object returned is read only. Any changes required must
* be done by calling other APIs.
*/
readonly attribute jsval connection;
/**
* A connectionInformation object with the same information found in an
* nsIDOMMozWifiConnectionInfoEvent (but without the network).
* If we are not currently connected to a network, this will be null.
*/
readonly attribute jsval connectionInformation;
/**
* State notification listeners. These all take an
* nsIDOMMozWifiStatusChangeEvent with the new status and a network (which
* may be null).
*
* The possible statuses are:
* - connecting: Fires when we start the process of connecting to a
* network.
* - associated: Fires when we have connected to an access point but do
* not yet have an IP address.
* - connected: Fires once we are fully connected to an access point and
* can access the internet.
* - disconnected: Fires when we either fail to connect to an access
* point (transition: associated -> disconnected) or
* when we were connected to a network but have
* disconnected for any reason (transition: connected ->
* disconnected).
*/
attribute nsIDOMEventListener onstatuschange;
/**
* An event listener that is called with information about the signal
* strength and link speed every 5 seconds.
*/
attribute nsIDOMEventListener connectionInfoUpdate;
/**
* These two events fire when the wifi system is brought online or taken
* offline.
*/
attribute nsIDOMEventListener onenabled;
attribute nsIDOMEventListener ondisabled;
};