gecko/security/nss/lib/pkcs7/secmime.h

196 lines
8.1 KiB
C
Raw Normal View History

2008-06-06 05:40:11 -07:00
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Header file for routines specific to S/MIME. Keep things that are pure
* pkcs7 out of here; this is for S/MIME policy, S/MIME interoperability, etc.
*
* $Id: secmime.h,v 1.2 2004/04/25 15:03:13 gerv%gerv.net Exp $
*/
#ifndef _SECMIME_H_
#define _SECMIME_H_ 1
#include "secpkcs7.h"
/************************************************************************/
SEC_BEGIN_PROTOS
/*
* Initialize the local recording of the user S/MIME cipher preferences.
* This function is called once for each cipher, the order being
* important (first call records greatest preference, and so on).
* When finished, it is called with a "which" of CIPHER_FAMILID_MASK.
* If the function is called again after that, it is assumed that
* the preferences are being reset, and the old preferences are
* discarded.
*
* XXX This is for a particular user, and right now the storage is
* XXX local, static. The preference should be stored elsewhere to allow
* XXX for multiple uses of one library? How does SSL handle this;
* XXX it has something similar?
*
* - The "which" values are defined in ciferfam.h (the SMIME_* values,
* for example SMIME_DES_CBC_56).
* - If "on" is non-zero then the named cipher is enabled, otherwise
* it is disabled. (It is not necessary to call the function for
* ciphers that are disabled, however, as that is the default.)
*
* If the cipher preference is successfully recorded, SECSuccess
* is returned. Otherwise SECFailure is returned. The only errors
* are due to failure allocating memory or bad parameters/calls:
* SEC_ERROR_XXX ("which" is not in the S/MIME cipher family)
* SEC_ERROR_XXX (function is being called more times than there
* are known/expected ciphers)
*/
extern SECStatus SECMIME_EnableCipher(long which, int on);
/*
* Initialize the local recording of the S/MIME policy.
* This function is called to enable/disable a particular cipher.
* (S/MIME encryption or decryption using a particular cipher is only
* allowed if that cipher is currently enabled.) At startup, all S/MIME
* ciphers are disabled. From that point, this function can be called
* to enable a cipher -- it is not necessary to call this to disable
* a cipher unless that cipher was previously, explicitly enabled via
* this function.
*
* XXX This is for a the current module, I think, so local, static storage
* XXX is okay. Is that correct, or could multiple uses of the same
* XXX library expect to operate under different policies?
*
* - The "which" values are defined in ciferfam.h (the SMIME_* values,
* for example SMIME_DES_CBC_56).
* - If "on" is non-zero then the named cipher is enabled, otherwise
* it is disabled.
*
* If the cipher is successfully enabled/disabled, SECSuccess is
* returned. Otherwise SECFailure is returned. The only errors
* are due to bad parameters:
* SEC_ERROR_XXX ("which" is not in the S/MIME cipher family)
* SEC_ERROR_XXX ("which" exceeds expected maximum cipher; this is
* really an internal error)
*/
extern SECStatus SECMIME_SetPolicy(long which, int on);
/*
* Does the current policy allow S/MIME decryption of this particular
* algorithm and keysize?
*/
extern PRBool SECMIME_DecryptionAllowed(SECAlgorithmID *algid, PK11SymKey *key);
/*
* Does the current policy allow *any* S/MIME encryption (or decryption)?
*
* This tells whether or not *any* S/MIME encryption can be done,
* according to policy. Callers may use this to do nicer user interface
* (say, greying out a checkbox so a user does not even try to encrypt
* a message when they are not allowed to) or for any reason they want
* to check whether S/MIME encryption (or decryption, for that matter)
* may be done.
*
* It takes no arguments. The return value is a simple boolean:
* PR_TRUE means encryption (or decryption) is *possible*
* (but may still fail due to other reasons, like because we cannot
* find all the necessary certs, etc.; PR_TRUE is *not* a guarantee)
* PR_FALSE means encryption (or decryption) is not permitted
*
* There are no errors from this routine.
*/
extern PRBool SECMIME_EncryptionPossible(void);
/*
* Start an S/MIME encrypting context.
*
* "scert" is the cert for the sender. It will be checked for validity.
* "rcerts" are the certs for the recipients. They will also be checked.
*
* "certdb" is the cert database to use for verifying the certs.
* It can be NULL if a default database is available (like in the client).
*
* This function already does all of the stuff specific to S/MIME protocol
* and local policy; the return value just needs to be passed to
* SEC_PKCS7Encode() or to SEC_PKCS7EncoderStart() to create the encoded data,
* and finally to SEC_PKCS7DestroyContentInfo().
*
* An error results in a return value of NULL and an error set.
* (Retrieve specific errors via PORT_GetError()/XP_GetError().)
*/
extern SEC_PKCS7ContentInfo *SECMIME_CreateEncrypted(CERTCertificate *scert,
CERTCertificate **rcerts,
CERTCertDBHandle *certdb,
SECKEYGetPasswordKey pwfn,
void *pwfn_arg);
/*
* Start an S/MIME signing context.
*
* "scert" is the cert that will be used to sign the data. It will be
* checked for validity.
*
* "certdb" is the cert database to use for verifying the cert.
* It can be NULL if a default database is available (like in the client).
*
* "digestalg" names the digest algorithm. (It should be SEC_OID_SHA1;
* XXX There should be SECMIME functions for hashing, or the hashing should
* be built into this interface, which we would like because we would
* support more smartcards that way, and then this argument should go away.)
*
* "digest" is the actual digest of the data. It must be provided in
* the case of detached data or NULL if the content will be included.
*
* This function already does all of the stuff specific to S/MIME protocol
* and local policy; the return value just needs to be passed to
* SEC_PKCS7Encode() or to SEC_PKCS7EncoderStart() to create the encoded data,
* and finally to SEC_PKCS7DestroyContentInfo().
*
* An error results in a return value of NULL and an error set.
* (Retrieve specific errors via PORT_GetError()/XP_GetError().)
*/
extern SEC_PKCS7ContentInfo *SECMIME_CreateSigned(CERTCertificate *scert,
CERTCertificate *ecert,
CERTCertDBHandle *certdb,
SECOidTag digestalg,
SECItem *digest,
SECKEYGetPasswordKey pwfn,
void *pwfn_arg);
/************************************************************************/
SEC_END_PROTOS
#endif /* _SECMIME_H_ */