gecko/modules/libpr0n/public/imgIContainer.idl

/** -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 *
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 2001
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Stuart Parmenter <pavlov@netscape.com>
 *   Federico Mena-Quintero <federico@novell.com>
 *   Joe Drew <joe@drew.ca>
 *   Bobby Holley <bobbyholley@gmail.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"

interface imgIDecoderObserver;

%{C++
#include "gfxImageSurface.h"
#include "gfxContext.h"
#include "gfxMatrix.h"
#include "gfxRect.h"
#include "gfxPattern.h"
#include "gfxASurface.h"
#include "nsRect.h"
#include "nsSize.h"
#include "limits.h"

class nsIFrame;
%}

[ptr] native gfxImageSurface(gfxImageSurface);
[ptr] native gfxASurface(gfxASurface);
native gfxImageFormat(gfxASurface::gfxImageFormat);
[ptr] native gfxContext(gfxContext);
[ref] native gfxMatrix(gfxMatrix);
[ref] native gfxRect(gfxRect);
native gfxGraphicsFilter(gfxPattern::GraphicsFilter);
[ref] native nsIntRect(nsIntRect);
[ref] native nsIntSize(nsIntSize);
[ptr] native nsIFrame(nsIFrame);

/**
 * imgIContainer is the interface that represents an image. It allows
 * access to frames as Thebes surfaces, and permits users to extract subregions
 * as other imgIContainers. It also allows drawing of images on to Thebes
 * contexts.
 *
 * Internally, imgIContainer also manages animation of images.
 */
[scriptable, uuid(239dfa70-2285-4d63-99cd-e9b7ff9555c7)]
interface imgIContainer : nsISupports
{
  /**
   * The width of the container rectangle.  In the case of any error,
   * zero is returned, and an exception will be thrown.
   */
  readonly attribute PRInt32 width;

  /**
   * The height of the container rectangle.  In the case of any error,
   * zero is returned, and an exception will be thrown.
   */
  readonly attribute PRInt32 height;

  /**
    * Enumerated values for the 'type' attribute (below).
    */
  const unsigned short TYPE_RASTER = 0;
  const unsigned short TYPE_VECTOR = 1;

  /**
   * The type of this image (one of the TYPE_* values above).
   */
  readonly attribute unsigned short type;

  /**
   * Direct C++ accessor for 'type' attribute, for convenience.
   */
  [noscript, notxpcom] PRUint16 GetType();

  /**
   * Whether this image is animated. You can only be guaranteed that querying
   * this will not throw if STATUS_DECODE_COMPLETE is set on the imgIRequest.
   *
   * @throws NS_ERROR_NOT_AVAILABLE if the animated state cannot be determined.
   */
  readonly attribute boolean animated;

  /**
   * Whether the current frame is opaque; that is, needs the background painted
   * behind it.
   */
  readonly attribute boolean currentFrameIsOpaque;

  /**
   * Flags for imgIContainer operations.
   *
   * Meanings:
   *
   * FLAG_NONE: Lack of flags
   *
   * FLAG_SYNC_DECODE: Forces synchronous/non-progressive decode of all
   * available data before the call returns. It is an error to pass this flag
   * from a call stack that originates in a decoder (ie, from a decoder
   * observer event).
   */

  const long FLAG_NONE            = 0x0;
  const long FLAG_SYNC_DECODE     = 0x1;

  /**
    * Constants for specifying various "special" frames.
    *
    * FRAME_FIRST: The first frame
    * FRAME_CURRENT: The current frame
    *
    * FRAME_MAX_VALUE should be set to the value of the maximum constant above,
    * as it is used for ensuring that a valid value was passed in.
    */
  const unsigned long FRAME_FIRST = 0;
  const unsigned long FRAME_CURRENT = 1;
  const unsigned long FRAME_MAX_VALUE = 1;

  /**
   * Get a surface for the given frame. This may be a platform-native,
   * optimized surface, so you cannot inspect its pixel data.
   *
   * @param aWhichFrame Frame specifier of the FRAME_* variety.
   * @param aFlags Flags of the FLAG_* variety
   */
  [noscript] gfxASurface getFrame(in PRUint32 aWhichFrame,
                                  in PRUint32 aFlags);

  /**
   * Create and return a new copy of the given frame that you can write to
   * and otherwise inspect the pixels of.
   *
   * @param aWhichFrame Frame specifier of the FRAME_* variety.
   * @param aFlags Flags of the FLAG_* variety
   */
  [noscript] gfxImageSurface copyFrame(in PRUint32 aWhichFrame,
                                       in PRUint32 aFlags);

  /**
   * Create a new imgContainer that contains only a single frame, which itself
   * contains a subregion of the given frame.
   *
   * @param aWhichFrame Frame specifier of the FRAME_* variety.
   * @param aRect the area of the current frame to be duplicated in the
   *              returned imgContainer's frame.
   * @param aFlags Flags of the FLAG_* variety
   */
  [noscript] imgIContainer extractFrame(in PRUint32 aWhichFrame,
                                        [const] in nsIntRect aRect,
                                        in PRUint32 aFlags);

  /**
   * Draw the current frame on to the context specified.
   *
   * @param aContext The Thebes context to draw the image to.
   * @param aFilter The filter to be used if we're scaling the image.
   * @param aUserSpaceToImageSpace The transformation from user space (e.g.,
   *                               appunits) to image space.
   * @param aFill The area in the context to draw pixels to. Image will be
   *              automatically tiled as necessary.
   * @param aSubimage The area of the image, in pixels, that we are allowed to
   *                  sample from.
   * @param aViewportSize
   *          The size (in CSS pixels) of the viewport that would be available
   *          for the full image to occupy, if we were drawing the full image.
   *          (Note that we might not actually be drawing the full image -- we
   *          might be restricted by aSubimage -- but we still need the full
   *          image's viewport-size in order for SVG images with the "viewBox"
   *          attribute to position their content correctly.)
   * @param aFlags Flags of the FLAG_* variety
   */
  [noscript] void draw(in gfxContext aContext,
                       in gfxGraphicsFilter aFilter,
                       [const] in gfxMatrix aUserSpaceToImageSpace,
                       [const] in gfxRect aFill,
                       [const] in nsIntRect aSubimage,
                       [const] in nsIntSize aViewportSize,
                       in PRUint32 aFlags);

  /**
   * If this image is TYPE_VECTOR, i.e. is really an embedded SVG document,
   * this method returns a pointer to the root nsIFrame of that document. If
   * not (or if the root nsIFrame isn't available for some reason), this method
   * returns nsnull.
   *
   * "notxpcom" for convenience, since we have no need for nsresult return-val.
   */
  [notxpcom] nsIFrame GetRootLayoutFrame();

  /*
   * Ensures that an image is decoding. Calling this function guarantees that
   * the image will at some point fire off decode notifications. Calling draw(),
   * getFrame(), copyFrame(), or extractCurrentFrame() triggers the same
   * mechanism internally. Thus, if you want to be sure that the image will be
   * decoded but don't want to access it until then, you must call
   * requestDecode().
   */
  void requestDecode();

  /**
    * Increments the lock count on the image. An image will not be discarded
    * as long as the lock count is nonzero. Note that it is still possible for
    * the image to be undecoded if decode-on-draw is enabled and the image
    * was never drawn.
    *
    * Upon instantiation images have a lock count of zero.
    */
  void lockImage();

  /**
    * Decreases the lock count on the image. If the lock count drops to zero,
    * the image is allowed to discard its frame data to save memory.
    *
    * Upon instantiation images have a lock count of zero. It is an error to
    * call this method without first having made a matching lockImage() call.
    * In other words, the lock count is not allowed to be negative.
    */
  void unlockImage();

  /**
   * Animation mode Constants
   *   0 = normal
   *   1 = don't animate
   *   2 = loop once
   */
  const short kNormalAnimMode   = 0;
  const short kDontAnimMode     = 1;
  const short kLoopOnceAnimMode = 2;

  attribute unsigned short animationMode;

  /* Methods to control animation */
  void resetAnimation();
};