gecko/netwerk/socket/nsSOCKSIOLayer.cpp

1183 lines
35 KiB
C++
Raw Normal View History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Justin Bradford <jab@atdot.org>
* Bradley Baetz <bbaetz@acm.org>
* Darin Fisher <darin@meer.net>
* Malcolm Smith <malsmith@cs.rmit.edu.au>
* Christopher Davis <chrisd@torproject.org>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nspr.h"
#include "nsString.h"
#include "nsCRT.h"
#include "nsIServiceManager.h"
#include "nsIDNSService.h"
#include "nsIDNSRecord.h"
#include "nsISOCKSSocketInfo.h"
#include "nsISocketProvider.h"
#include "nsSOCKSIOLayer.h"
#include "nsNetCID.h"
static PRDescIdentity nsSOCKSIOLayerIdentity;
static PRIOMethods nsSOCKSIOLayerMethods;
static bool firstTime = true;
#if defined(PR_LOGGING)
static PRLogModuleInfo *gSOCKSLog;
#define LOGDEBUG(args) PR_LOG(gSOCKSLog, PR_LOG_DEBUG, args)
#define LOGERROR(args) PR_LOG(gSOCKSLog, PR_LOG_ERROR , args)
#else
#define LOGDEBUG(args)
#define LOGERROR(args)
#endif
class nsSOCKSSocketInfo : public nsISOCKSSocketInfo
{
enum State {
SOCKS_INITIAL,
SOCKS_CONNECTING_TO_PROXY,
SOCKS4_WRITE_CONNECT_REQUEST,
SOCKS4_READ_CONNECT_RESPONSE,
SOCKS5_WRITE_AUTH_REQUEST,
SOCKS5_READ_AUTH_RESPONSE,
SOCKS5_WRITE_CONNECT_REQUEST,
SOCKS5_READ_CONNECT_RESPONSE_TOP,
SOCKS5_READ_CONNECT_RESPONSE_BOTTOM,
SOCKS_CONNECTED,
SOCKS_FAILED
};
// A buffer of 262 bytes should be enough for any request and response
// in case of SOCKS4 as well as SOCKS5
static const PRUint32 BUFFER_SIZE = 262;
static const PRUint32 MAX_HOSTNAME_LEN = 255;
public:
nsSOCKSSocketInfo();
virtual ~nsSOCKSSocketInfo() { HandshakeFinished(); }
NS_DECL_ISUPPORTS
NS_DECL_NSISOCKSSOCKETINFO
void Init(PRInt32 version,
const char *proxyHost,
PRInt32 proxyPort,
const char *destinationHost,
PRUint32 flags);
void SetConnectTimeout(PRIntervalTime to);
PRStatus DoHandshake(PRFileDesc *fd, PRInt16 oflags = -1);
PRInt16 GetPollFlags() const;
bool IsConnected() const { return mState == SOCKS_CONNECTED; }
private:
void HandshakeFinished(PRErrorCode err = 0);
PRStatus ConnectToProxy(PRFileDesc *fd);
PRStatus ContinueConnectingToProxy(PRFileDesc *fd, PRInt16 oflags);
PRStatus WriteV4ConnectRequest();
PRStatus ReadV4ConnectResponse();
PRStatus WriteV5AuthRequest();
PRStatus ReadV5AuthResponse();
PRStatus WriteV5ConnectRequest();
PRStatus ReadV5AddrTypeAndLength(PRUint8 *type, PRUint32 *len);
PRStatus ReadV5ConnectResponseTop();
PRStatus ReadV5ConnectResponseBottom();
void WriteUint8(PRUint8 d);
void WriteUint16(PRUint16 d);
void WriteUint32(PRUint32 d);
void WriteNetAddr(const PRNetAddr *addr);
void WriteNetPort(const PRNetAddr *addr);
void WriteString(const nsACString &str);
PRUint8 ReadUint8();
PRUint16 ReadUint16();
PRUint32 ReadUint32();
void ReadNetAddr(PRNetAddr *addr, PRUint16 fam);
void ReadNetPort(PRNetAddr *addr);
void WantRead(PRUint32 sz);
PRStatus ReadFromSocket(PRFileDesc *fd);
PRStatus WriteToSocket(PRFileDesc *fd);
private:
State mState;
PRUint8 * mData;
PRUint8 * mDataIoPtr;
PRUint32 mDataLength;
PRUint32 mReadOffset;
PRUint32 mAmountToRead;
nsCOMPtr<nsIDNSRecord> mDnsRec;
nsCString mDestinationHost;
nsCString mProxyHost;
PRInt32 mProxyPort;
PRInt32 mVersion; // SOCKS version 4 or 5
PRUint32 mFlags;
PRNetAddr mInternalProxyAddr;
PRNetAddr mExternalProxyAddr;
PRNetAddr mDestinationAddr;
PRIntervalTime mTimeout;
};
nsSOCKSSocketInfo::nsSOCKSSocketInfo()
: mState(SOCKS_INITIAL)
, mDataIoPtr(nsnull)
, mDataLength(0)
, mReadOffset(0)
, mAmountToRead(0)
, mProxyPort(-1)
, mVersion(-1)
, mFlags(0)
, mTimeout(PR_INTERVAL_NO_TIMEOUT)
{
mData = new PRUint8[BUFFER_SIZE];
PR_InitializeNetAddr(PR_IpAddrAny, 0, &mInternalProxyAddr);
PR_InitializeNetAddr(PR_IpAddrAny, 0, &mExternalProxyAddr);
PR_InitializeNetAddr(PR_IpAddrAny, 0, &mDestinationAddr);
}
void
nsSOCKSSocketInfo::Init(PRInt32 version, const char *proxyHost, PRInt32 proxyPort, const char *host, PRUint32 flags)
{
mVersion = version;
mProxyHost = proxyHost;
mProxyPort = proxyPort;
mDestinationHost = host;
mFlags = flags;
}
NS_IMPL_THREADSAFE_ISUPPORTS1(nsSOCKSSocketInfo, nsISOCKSSocketInfo)
NS_IMETHODIMP
nsSOCKSSocketInfo::GetExternalProxyAddr(PRNetAddr * *aExternalProxyAddr)
{
memcpy(*aExternalProxyAddr, &mExternalProxyAddr, sizeof(PRNetAddr));
return NS_OK;
}
NS_IMETHODIMP
nsSOCKSSocketInfo::SetExternalProxyAddr(PRNetAddr *aExternalProxyAddr)
{
memcpy(&mExternalProxyAddr, aExternalProxyAddr, sizeof(PRNetAddr));
return NS_OK;
}
NS_IMETHODIMP
nsSOCKSSocketInfo::GetDestinationAddr(PRNetAddr * *aDestinationAddr)
{
memcpy(*aDestinationAddr, &mDestinationAddr, sizeof(PRNetAddr));
return NS_OK;
}
NS_IMETHODIMP
nsSOCKSSocketInfo::SetDestinationAddr(PRNetAddr *aDestinationAddr)
{
memcpy(&mDestinationAddr, aDestinationAddr, sizeof(PRNetAddr));
return NS_OK;
}
NS_IMETHODIMP
nsSOCKSSocketInfo::GetInternalProxyAddr(PRNetAddr * *aInternalProxyAddr)
{
memcpy(*aInternalProxyAddr, &mInternalProxyAddr, sizeof(PRNetAddr));
return NS_OK;
}
NS_IMETHODIMP
nsSOCKSSocketInfo::SetInternalProxyAddr(PRNetAddr *aInternalProxyAddr)
{
memcpy(&mInternalProxyAddr, aInternalProxyAddr, sizeof(PRNetAddr));
return NS_OK;
}
// There needs to be a means of distinguishing between connection errors
// that the SOCKS server reports when it rejects a connection request, and
// connection errors that happen while attempting to connect to the SOCKS
// server. Otherwise, Firefox will report incorrectly that the proxy server
// is refusing connections when a SOCKS request is rejected by the proxy.
// When a SOCKS handshake failure occurs, the PR error is set to
// PR_UNKNOWN_ERROR, and the real error code is returned via the OS error.
void
nsSOCKSSocketInfo::HandshakeFinished(PRErrorCode err)
{
if (err == 0) {
mState = SOCKS_CONNECTED;
} else {
mState = SOCKS_FAILED;
PR_SetError(PR_UNKNOWN_ERROR, err);
}
// We don't need the buffer any longer, so free it.
delete [] mData;
mData = nsnull;
mDataIoPtr = nsnull;
mDataLength = 0;
mReadOffset = 0;
mAmountToRead = 0;
}
PRStatus
nsSOCKSSocketInfo::ConnectToProxy(PRFileDesc *fd)
{
PRStatus status;
nsresult rv;
NS_ABORT_IF_FALSE(mState == SOCKS_INITIAL,
"Must be in initial state to make connection!");
// If we haven't performed the DNS lookup, do that now.
if (!mDnsRec) {
nsCOMPtr<nsIDNSService> dns = do_GetService(NS_DNSSERVICE_CONTRACTID);
if (!dns)
return PR_FAILURE;
rv = dns->Resolve(mProxyHost, 0, getter_AddRefs(mDnsRec));
if (NS_FAILED(rv)) {
LOGERROR(("socks: DNS lookup for SOCKS proxy %s failed",
mProxyHost.get()));
return PR_FAILURE;
}
}
PRInt32 addresses = 0;
do {
if (addresses++)
mDnsRec->ReportUnusable(mProxyPort);
rv = mDnsRec->GetNextAddr(mProxyPort, &mInternalProxyAddr);
// No more addresses to try? If so, we'll need to bail
if (NS_FAILED(rv)) {
LOGERROR(("socks: unable to connect to SOCKS proxy, %s",
mProxyHost.get()));
return PR_FAILURE;
}
#if defined(PR_LOGGING)
char buf[64];
PR_NetAddrToString(&mInternalProxyAddr, buf, sizeof(buf));
LOGDEBUG(("socks: trying proxy server, %s:%hu",
buf, PR_ntohs(PR_NetAddrInetPort(&mInternalProxyAddr))));
#endif
status = fd->lower->methods->connect(fd->lower,
&mInternalProxyAddr, mTimeout);
if (status != PR_SUCCESS) {
PRErrorCode c = PR_GetError();
// If EINPROGRESS, return now and check back later after polling
if (c == PR_WOULD_BLOCK_ERROR || c == PR_IN_PROGRESS_ERROR) {
mState = SOCKS_CONNECTING_TO_PROXY;
return status;
}
}
} while (status != PR_SUCCESS);
// Connected now, start SOCKS
if (mVersion == 4)
return WriteV4ConnectRequest();
return WriteV5AuthRequest();
}
PRStatus
nsSOCKSSocketInfo::ContinueConnectingToProxy(PRFileDesc *fd, PRInt16 oflags)
{
PRStatus status;
NS_ABORT_IF_FALSE(mState == SOCKS_CONNECTING_TO_PROXY,
"Continuing connection in wrong state!");
LOGDEBUG(("socks: continuing connection to proxy"));
status = fd->lower->methods->connectcontinue(fd->lower, oflags);
if (status != PR_SUCCESS) {
PRErrorCode c = PR_GetError();
if (c != PR_WOULD_BLOCK_ERROR && c != PR_IN_PROGRESS_ERROR) {
// A connection failure occured, try another address
mState = SOCKS_INITIAL;
return ConnectToProxy(fd);
}
// We're still connecting
return PR_FAILURE;
}
// Connected now, start SOCKS
if (mVersion == 4)
return WriteV4ConnectRequest();
return WriteV5AuthRequest();
}
PRStatus
nsSOCKSSocketInfo::WriteV4ConnectRequest()
{
PRNetAddr *addr = &mDestinationAddr;
PRInt32 proxy_resolve;
NS_ABORT_IF_FALSE(mState == SOCKS_CONNECTING_TO_PROXY,
"Invalid state!");
proxy_resolve = mFlags & nsISocketProvider::PROXY_RESOLVES_HOST;
mDataLength = 0;
mState = SOCKS4_WRITE_CONNECT_REQUEST;
LOGDEBUG(("socks4: sending connection request (socks4a resolve? %s)",
proxy_resolve? "yes" : "no"));
// Send a SOCKS 4 connect request.
WriteUint8(0x04); // version -- 4
WriteUint8(0x01); // command -- connect
WriteNetPort(addr);
if (proxy_resolve) {
// Add the full name, null-terminated, to the request
// according to SOCKS 4a. A fake IP address, with the first
// four bytes set to 0 and the last byte set to something other
// than 0, is used to notify the proxy that this is a SOCKS 4a
// request. This request type works for Tor and perhaps others.
WriteUint32(PR_htonl(0x00000001)); // Fake IP
WriteUint8(0x00); // Send an emtpy username
if (mDestinationHost.Length() > MAX_HOSTNAME_LEN) {
LOGERROR(("socks4: destination host name is too long!"));
HandshakeFinished(PR_BAD_ADDRESS_ERROR);
return PR_FAILURE;
}
WriteString(mDestinationHost); // Hostname
WriteUint8(0x00);
} else if (PR_NetAddrFamily(addr) == PR_AF_INET) {
WriteNetAddr(addr); // Add the IPv4 address
WriteUint8(0x00); // Send an emtpy username
} else if (PR_NetAddrFamily(addr) == PR_AF_INET6) {
LOGERROR(("socks: SOCKS 4 can't handle IPv6 addresses!"));
HandshakeFinished(PR_BAD_ADDRESS_ERROR);
return PR_FAILURE;
}
return PR_SUCCESS;
}
PRStatus
nsSOCKSSocketInfo::ReadV4ConnectResponse()
{
NS_ABORT_IF_FALSE(mState == SOCKS4_READ_CONNECT_RESPONSE,
"Handling SOCKS 4 connection reply in wrong state!");
NS_ABORT_IF_FALSE(mDataLength == 8,
"SOCKS 4 connection reply must be 8 bytes!");
LOGDEBUG(("socks4: checking connection reply"));
if (ReadUint8() != 0x00) {
LOGERROR(("socks4: wrong connection reply"));
HandshakeFinished(PR_CONNECT_REFUSED_ERROR);
return PR_FAILURE;
}
// See if our connection request was granted
if (ReadUint8() == 90) {
LOGDEBUG(("socks4: connection successful!"));
HandshakeFinished();
return PR_SUCCESS;
}
LOGERROR(("socks4: unable to connect"));
HandshakeFinished(PR_CONNECT_REFUSED_ERROR);
return PR_FAILURE;
}
PRStatus
nsSOCKSSocketInfo::WriteV5AuthRequest()
{
NS_ABORT_IF_FALSE(mVersion == 5, "SOCKS version must be 5!");
mState = SOCKS5_WRITE_AUTH_REQUEST;
// Send an initial SOCKS 5 greeting
LOGDEBUG(("socks5: sending auth methods"));
WriteUint8(0x05); // version -- 5
WriteUint8(0x01); // # auth methods -- 1
WriteUint8(0x00); // we don't support authentication
return PR_SUCCESS;
}
PRStatus
nsSOCKSSocketInfo::ReadV5AuthResponse()
{
NS_ABORT_IF_FALSE(mState == SOCKS5_READ_AUTH_RESPONSE,
"Handling SOCKS 5 auth method reply in wrong state!");
NS_ABORT_IF_FALSE(mDataLength == 2,
"SOCKS 5 auth method reply must be 2 bytes!");
LOGDEBUG(("socks5: checking auth method reply"));
// Check version number
if (ReadUint8() != 0x05) {
LOGERROR(("socks5: unexpected version in the reply"));
HandshakeFinished(PR_CONNECT_REFUSED_ERROR);
return PR_FAILURE;
}
// Make sure our authentication choice was accepted
if (ReadUint8() != 0x00) {
LOGERROR(("socks5: server did not accept our authentication method"));
HandshakeFinished(PR_CONNECT_REFUSED_ERROR);
return PR_FAILURE;
}
return WriteV5ConnectRequest();
}
PRStatus
nsSOCKSSocketInfo::WriteV5ConnectRequest()
{
// Send SOCKS 5 connect request
PRNetAddr *addr = &mDestinationAddr;
PRInt32 proxy_resolve;
proxy_resolve = mFlags & nsISocketProvider::PROXY_RESOLVES_HOST;
LOGDEBUG(("socks5: sending connection request (socks5 resolve? %s)",
proxy_resolve? "yes" : "no"));
mDataLength = 0;
mState = SOCKS5_WRITE_CONNECT_REQUEST;
WriteUint8(0x05); // version -- 5
WriteUint8(0x01); // command -- connect
WriteUint8(0x00); // reserved
// Add the address to the SOCKS 5 request. SOCKS 5 supports several
// address types, so we pick the one that works best for us.
if (proxy_resolve) {
// Add the host name. Only a single byte is used to store the length,
// so we must prevent long names from being used.
if (mDestinationHost.Length() > MAX_HOSTNAME_LEN) {
LOGERROR(("socks5: destination host name is too long!"));
HandshakeFinished(PR_BAD_ADDRESS_ERROR);
return PR_FAILURE;
}
WriteUint8(0x03); // addr type -- domainname
WriteUint8(mDestinationHost.Length()); // name length
WriteString(mDestinationHost);
} else if (PR_NetAddrFamily(addr) == PR_AF_INET) {
WriteUint8(0x01); // addr type -- IPv4
WriteNetAddr(addr);
} else if (PR_NetAddrFamily(addr) == PR_AF_INET6) {
WriteUint8(0x04); // addr type -- IPv6
WriteNetAddr(addr);
} else {
LOGERROR(("socks5: destination address of unknown type!"));
HandshakeFinished(PR_BAD_ADDRESS_ERROR);
return PR_FAILURE;
}
WriteNetPort(addr); // port
return PR_SUCCESS;
}
PRStatus
nsSOCKSSocketInfo::ReadV5AddrTypeAndLength(PRUint8 *type, PRUint32 *len)
{
NS_ABORT_IF_FALSE(mState == SOCKS5_READ_CONNECT_RESPONSE_TOP ||
mState == SOCKS5_READ_CONNECT_RESPONSE_BOTTOM,
"Invalid state!");
NS_ABORT_IF_FALSE(mDataLength >= 5,
"SOCKS 5 connection reply must be at least 5 bytes!");
// Seek to the address location
mReadOffset = 3;
*type = ReadUint8();
switch (*type) {
case 0x01: // ipv4
*len = 4 - 1;
break;
case 0x04: // ipv6
*len = 16 - 1;
break;
case 0x03: // fqdn
*len = ReadUint8();
break;
default: // wrong address type
LOGERROR(("socks5: wrong address type in connection reply!"));
return PR_FAILURE;
}
return PR_SUCCESS;
}
PRStatus
nsSOCKSSocketInfo::ReadV5ConnectResponseTop()
{
PRUint8 res;
PRUint32 len;
NS_ABORT_IF_FALSE(mState == SOCKS5_READ_CONNECT_RESPONSE_TOP,
"Invalid state!");
NS_ABORT_IF_FALSE(mDataLength == 5,
"SOCKS 5 connection reply must be exactly 5 bytes!");
LOGDEBUG(("socks5: checking connection reply"));
// Check version number
if (ReadUint8() != 0x05) {
LOGERROR(("socks5: unexpected version in the reply"));
HandshakeFinished(PR_CONNECT_REFUSED_ERROR);
return PR_FAILURE;
}
// Check response
res = ReadUint8();
if (res != 0x00) {
PRErrorCode c = PR_CONNECT_REFUSED_ERROR;
switch (res) {
case 0x01:
LOGERROR(("socks5: connect failed: "
"01, General SOCKS server failure."));
break;
case 0x02:
LOGERROR(("socks5: connect failed: "
"02, Connection not allowed by ruleset."));
break;
case 0x03:
LOGERROR(("socks5: connect failed: 03, Network unreachable."));
c = PR_NETWORK_UNREACHABLE_ERROR;
break;
case 0x04:
LOGERROR(("socks5: connect failed: 04, Host unreachable."));
break;
case 0x05:
LOGERROR(("socks5: connect failed: 05, Connection refused."));
break;
case 0x06:
LOGERROR(("socks5: connect failed: 06, TTL expired."));
c = PR_CONNECT_TIMEOUT_ERROR;
break;
case 0x07:
LOGERROR(("socks5: connect failed: "
"07, Command not supported."));
break;
case 0x08:
LOGERROR(("socks5: connect failed: "
"08, Address type not supported."));
c = PR_BAD_ADDRESS_ERROR;
break;
default:
LOGERROR(("socks5: connect failed."));
break;
}
HandshakeFinished(c);
return PR_FAILURE;
}
if (ReadV5AddrTypeAndLength(&res, &len) != PR_SUCCESS) {
HandshakeFinished(PR_BAD_ADDRESS_ERROR);
return PR_FAILURE;
}
mState = SOCKS5_READ_CONNECT_RESPONSE_BOTTOM;
WantRead(len + 2);
return PR_SUCCESS;
}
PRStatus
nsSOCKSSocketInfo::ReadV5ConnectResponseBottom()
{
PRUint8 type;
PRUint32 len;
NS_ABORT_IF_FALSE(mState == SOCKS5_READ_CONNECT_RESPONSE_BOTTOM,
"Invalid state!");
if (ReadV5AddrTypeAndLength(&type, &len) != PR_SUCCESS) {
HandshakeFinished(PR_BAD_ADDRESS_ERROR);
return PR_FAILURE;
}
NS_ABORT_IF_FALSE(mDataLength == 7+len,
"SOCKS 5 unexpected length of connection reply!");
LOGDEBUG(("socks5: loading source addr and port"));
// Read what the proxy says is our source address
switch (type) {
case 0x01: // ipv4
ReadNetAddr(&mExternalProxyAddr, PR_AF_INET);
break;
case 0x04: // ipv6
ReadNetAddr(&mExternalProxyAddr, PR_AF_INET6);
break;
case 0x03: // fqdn (skip)
mReadOffset += len;
mExternalProxyAddr.raw.family = PR_AF_INET;
break;
}
ReadNetPort(&mExternalProxyAddr);
LOGDEBUG(("socks5: connected!"));
HandshakeFinished();
return PR_SUCCESS;
}
void
nsSOCKSSocketInfo::SetConnectTimeout(PRIntervalTime to)
{
mTimeout = to;
}
PRStatus
nsSOCKSSocketInfo::DoHandshake(PRFileDesc *fd, PRInt16 oflags)
{
LOGDEBUG(("socks: DoHandshake(), state = %d", mState));
switch (mState) {
case SOCKS_INITIAL:
return ConnectToProxy(fd);
case SOCKS_CONNECTING_TO_PROXY:
return ContinueConnectingToProxy(fd, oflags);
case SOCKS4_WRITE_CONNECT_REQUEST:
if (WriteToSocket(fd) != PR_SUCCESS)
return PR_FAILURE;
WantRead(8);
mState = SOCKS4_READ_CONNECT_RESPONSE;
return PR_SUCCESS;
case SOCKS4_READ_CONNECT_RESPONSE:
if (ReadFromSocket(fd) != PR_SUCCESS)
return PR_FAILURE;
return ReadV4ConnectResponse();
case SOCKS5_WRITE_AUTH_REQUEST:
if (WriteToSocket(fd) != PR_SUCCESS)
return PR_FAILURE;
WantRead(2);
mState = SOCKS5_READ_AUTH_RESPONSE;
return PR_SUCCESS;
case SOCKS5_READ_AUTH_RESPONSE:
if (ReadFromSocket(fd) != PR_SUCCESS)
return PR_FAILURE;
return ReadV5AuthResponse();
case SOCKS5_WRITE_CONNECT_REQUEST:
if (WriteToSocket(fd) != PR_SUCCESS)
return PR_FAILURE;
// The SOCKS 5 response to the connection request is variable
// length. First, we'll read enough to tell how long the response
// is, and will read the rest later.
WantRead(5);
mState = SOCKS5_READ_CONNECT_RESPONSE_TOP;
return PR_SUCCESS;
case SOCKS5_READ_CONNECT_RESPONSE_TOP:
if (ReadFromSocket(fd) != PR_SUCCESS)
return PR_FAILURE;
return ReadV5ConnectResponseTop();
case SOCKS5_READ_CONNECT_RESPONSE_BOTTOM:
if (ReadFromSocket(fd) != PR_SUCCESS)
return PR_FAILURE;
return ReadV5ConnectResponseBottom();
case SOCKS_CONNECTED:
LOGERROR(("socks: already connected"));
HandshakeFinished(PR_IS_CONNECTED_ERROR);
return PR_FAILURE;
case SOCKS_FAILED:
LOGERROR(("socks: already failed"));
return PR_FAILURE;
}
LOGERROR(("socks: executing handshake in invalid state, %d", mState));
HandshakeFinished(PR_INVALID_STATE_ERROR);
return PR_FAILURE;
}
PRInt16
nsSOCKSSocketInfo::GetPollFlags() const
{
switch (mState) {
case SOCKS_CONNECTING_TO_PROXY:
return PR_POLL_EXCEPT | PR_POLL_WRITE;
case SOCKS4_WRITE_CONNECT_REQUEST:
case SOCKS5_WRITE_AUTH_REQUEST:
case SOCKS5_WRITE_CONNECT_REQUEST:
return PR_POLL_WRITE;
case SOCKS4_READ_CONNECT_RESPONSE:
case SOCKS5_READ_AUTH_RESPONSE:
case SOCKS5_READ_CONNECT_RESPONSE_TOP:
case SOCKS5_READ_CONNECT_RESPONSE_BOTTOM:
return PR_POLL_READ;
default:
break;
}
return 0;
}
inline void
nsSOCKSSocketInfo::WriteUint8(PRUint8 v)
{
NS_ABORT_IF_FALSE(mDataLength + sizeof(v) <= BUFFER_SIZE,
"Can't write that much data!");
mData[mDataLength] = v;
mDataLength += sizeof(v);
}
inline void
nsSOCKSSocketInfo::WriteUint16(PRUint16 v)
{
NS_ABORT_IF_FALSE(mDataLength + sizeof(v) <= BUFFER_SIZE,
"Can't write that much data!");
memcpy(mData + mDataLength, &v, sizeof(v));
mDataLength += sizeof(v);
}
inline void
nsSOCKSSocketInfo::WriteUint32(PRUint32 v)
{
NS_ABORT_IF_FALSE(mDataLength + sizeof(v) <= BUFFER_SIZE,
"Can't write that much data!");
memcpy(mData + mDataLength, &v, sizeof(v));
mDataLength += sizeof(v);
}
void
nsSOCKSSocketInfo::WriteNetAddr(const PRNetAddr *addr)
{
const char *ip = NULL;
PRUint32 len = 0;
if (PR_NetAddrFamily(addr) == PR_AF_INET) {
ip = (const char*)&addr->inet.ip;
len = sizeof(addr->inet.ip);
} else if (PR_NetAddrFamily(addr) == PR_AF_INET6) {
ip = (const char*)addr->ipv6.ip.pr_s6_addr;
len = sizeof(addr->ipv6.ip.pr_s6_addr);
}
NS_ABORT_IF_FALSE(ip != NULL, "Unknown address");
NS_ABORT_IF_FALSE(mDataLength + len <= BUFFER_SIZE,
"Can't write that much data!");
memcpy(mData + mDataLength, ip, len);
mDataLength += len;
}
void
nsSOCKSSocketInfo::WriteNetPort(const PRNetAddr *addr)
{
WriteUint16(PR_NetAddrInetPort(addr));
}
void
nsSOCKSSocketInfo::WriteString(const nsACString &str)
{
NS_ABORT_IF_FALSE(mDataLength + str.Length() <= BUFFER_SIZE,
"Can't write that much data!");
memcpy(mData + mDataLength, str.Data(), str.Length());
mDataLength += str.Length();
}
inline PRUint8
nsSOCKSSocketInfo::ReadUint8()
{
PRUint8 rv;
NS_ABORT_IF_FALSE(mReadOffset + sizeof(rv) <= mDataLength,
"Not enough space to pop a uint8!");
rv = mData[mReadOffset];
mReadOffset += sizeof(rv);
return rv;
}
inline PRUint16
nsSOCKSSocketInfo::ReadUint16()
{
PRUint16 rv;
NS_ABORT_IF_FALSE(mReadOffset + sizeof(rv) <= mDataLength,
"Not enough space to pop a uint16!");
memcpy(&rv, mData + mReadOffset, sizeof(rv));
mReadOffset += sizeof(rv);
return rv;
}
inline PRUint32
nsSOCKSSocketInfo::ReadUint32()
{
PRUint32 rv;
NS_ABORT_IF_FALSE(mReadOffset + sizeof(rv) <= mDataLength,
"Not enough space to pop a uint32!");
memcpy(&rv, mData + mReadOffset, sizeof(rv));
mReadOffset += sizeof(rv);
return rv;
}
void
nsSOCKSSocketInfo::ReadNetAddr(PRNetAddr *addr, PRUint16 fam)
{
PRUint32 amt;
const PRUint8 *ip = mData + mReadOffset;
addr->raw.family = fam;
if (fam == PR_AF_INET) {
amt = sizeof(addr->inet.ip);
NS_ABORT_IF_FALSE(mReadOffset + amt <= mDataLength,
"Not enough space to pop an ipv4 addr!");
memcpy(&addr->inet.ip, ip, amt);
} else if (fam == PR_AF_INET6) {
amt = sizeof(addr->ipv6.ip.pr_s6_addr);
NS_ABORT_IF_FALSE(mReadOffset + amt <= mDataLength,
"Not enough space to pop an ipv6 addr!");
memcpy(addr->ipv6.ip.pr_s6_addr, ip, amt);
}
mReadOffset += amt;
}
void
nsSOCKSSocketInfo::ReadNetPort(PRNetAddr *addr)
{
addr->inet.port = ReadUint16();
}
void
nsSOCKSSocketInfo::WantRead(PRUint32 sz)
{
NS_ABORT_IF_FALSE(mDataIoPtr == NULL,
"WantRead() called while I/O already in progress!");
NS_ABORT_IF_FALSE(mDataLength + sz <= BUFFER_SIZE,
"Can't read that much data!");
mAmountToRead = sz;
}
PRStatus
nsSOCKSSocketInfo::ReadFromSocket(PRFileDesc *fd)
{
PRInt32 rc;
const PRUint8 *end;
if (!mAmountToRead) {
LOGDEBUG(("socks: ReadFromSocket(), nothing to do"));
return PR_SUCCESS;
}
if (!mDataIoPtr) {
mDataIoPtr = mData + mDataLength;
mDataLength += mAmountToRead;
}
end = mData + mDataLength;
while (mDataIoPtr < end) {
rc = PR_Read(fd, mDataIoPtr, end - mDataIoPtr);
if (rc <= 0) {
if (rc == 0) {
LOGERROR(("socks: proxy server closed connection"));
HandshakeFinished(PR_CONNECT_REFUSED_ERROR);
return PR_FAILURE;
} else if (PR_GetError() == PR_WOULD_BLOCK_ERROR) {
LOGDEBUG(("socks: ReadFromSocket(), want read"));
}
break;
}
mDataIoPtr += rc;
}
LOGDEBUG(("socks: ReadFromSocket(), have %u bytes total",
unsigned(mDataIoPtr - mData)));
if (mDataIoPtr == end) {
mDataIoPtr = nsnull;
mAmountToRead = 0;
mReadOffset = 0;
return PR_SUCCESS;
}
return PR_FAILURE;
}
PRStatus
nsSOCKSSocketInfo::WriteToSocket(PRFileDesc *fd)
{
PRInt32 rc;
const PRUint8 *end;
if (!mDataLength) {
LOGDEBUG(("socks: WriteToSocket(), nothing to do"));
return PR_SUCCESS;
}
if (!mDataIoPtr)
mDataIoPtr = mData;
end = mData + mDataLength;
while (mDataIoPtr < end) {
rc = PR_Write(fd, mDataIoPtr, end - mDataIoPtr);
if (rc < 0) {
if (PR_GetError() == PR_WOULD_BLOCK_ERROR) {
LOGDEBUG(("socks: WriteToSocket(), want write"));
}
break;
}
mDataIoPtr += rc;
}
if (mDataIoPtr == end) {
mDataIoPtr = nsnull;
mDataLength = 0;
mReadOffset = 0;
return PR_SUCCESS;
}
return PR_FAILURE;
}
static PRStatus
nsSOCKSIOLayerConnect(PRFileDesc *fd, const PRNetAddr *addr, PRIntervalTime to)
{
PRStatus status;
PRNetAddr dst;
nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret;
if (info == NULL) return PR_FAILURE;
if (PR_NetAddrFamily(addr) == PR_AF_INET6 &&
PR_IsNetAddrType(addr, PR_IpAddrV4Mapped)) {
const PRUint8 *srcp;
LOGDEBUG(("socks: converting ipv4-mapped ipv6 address to ipv4"));
// copied from _PR_ConvertToIpv4NetAddr()
PR_InitializeNetAddr(PR_IpAddrAny, 0, &dst);
srcp = addr->ipv6.ip.pr_s6_addr;
memcpy(&dst.inet.ip, srcp + 12, 4);
dst.inet.family = PR_AF_INET;
dst.inet.port = addr->ipv6.port;
} else {
memcpy(&dst, addr, sizeof(dst));
}
info->SetDestinationAddr(&dst);
info->SetConnectTimeout(to);
do {
status = info->DoHandshake(fd, -1);
} while (status == PR_SUCCESS && !info->IsConnected());
return status;
}
static PRStatus
nsSOCKSIOLayerConnectContinue(PRFileDesc *fd, PRInt16 oflags)
{
PRStatus status;
nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret;
if (info == NULL) return PR_FAILURE;
do {
status = info->DoHandshake(fd, oflags);
} while (status == PR_SUCCESS && !info->IsConnected());
return status;
}
static PRInt16
nsSOCKSIOLayerPoll(PRFileDesc *fd, PRInt16 in_flags, PRInt16 *out_flags)
{
nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret;
if (info == NULL) return PR_FAILURE;
if (!info->IsConnected()) {
*out_flags = 0;
return info->GetPollFlags();
}
return fd->lower->methods->poll(fd->lower, in_flags, out_flags);
}
static PRStatus
nsSOCKSIOLayerClose(PRFileDesc *fd)
{
nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret;
PRDescIdentity id = PR_GetLayersIdentity(fd);
if (info && id == nsSOCKSIOLayerIdentity)
{
NS_RELEASE(info);
fd->identity = PR_INVALID_IO_LAYER;
}
return fd->lower->methods->close(fd->lower);
}
static PRFileDesc*
nsSOCKSIOLayerAccept(PRFileDesc *fd, PRNetAddr *addr, PRIntervalTime timeout)
{
// TODO: implement SOCKS support for accept
return fd->lower->methods->accept(fd->lower, addr, timeout);
}
static PRInt32
nsSOCKSIOLayerAcceptRead(PRFileDesc *sd, PRFileDesc **nd, PRNetAddr **raddr, void *buf, PRInt32 amount, PRIntervalTime timeout)
{
// TODO: implement SOCKS support for accept, then read from it
return sd->lower->methods->acceptread(sd->lower, nd, raddr, buf, amount, timeout);
}
static PRStatus
nsSOCKSIOLayerBind(PRFileDesc *fd, const PRNetAddr *addr)
{
// TODO: implement SOCKS support for bind (very similar to connect)
return fd->lower->methods->bind(fd->lower, addr);
}
static PRStatus
nsSOCKSIOLayerGetName(PRFileDesc *fd, PRNetAddr *addr)
{
nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret;
if (info != NULL && addr != NULL) {
if (info->GetExternalProxyAddr(&addr) == NS_OK)
return PR_SUCCESS;
}
return PR_FAILURE;
}
static PRStatus
nsSOCKSIOLayerGetPeerName(PRFileDesc *fd, PRNetAddr *addr)
{
nsSOCKSSocketInfo * info = (nsSOCKSSocketInfo*) fd->secret;
if (info != NULL && addr != NULL) {
if (info->GetDestinationAddr(&addr) == NS_OK)
return PR_SUCCESS;
}
return PR_FAILURE;
}
static PRStatus
nsSOCKSIOLayerListen(PRFileDesc *fd, PRIntn backlog)
{
// TODO: implement SOCKS support for listen
return fd->lower->methods->listen(fd->lower, backlog);
}
// add SOCKS IO layer to an existing socket
nsresult
nsSOCKSIOLayerAddToSocket(PRInt32 family,
const char *host,
PRInt32 port,
const char *proxyHost,
PRInt32 proxyPort,
PRInt32 socksVersion,
PRUint32 flags,
PRFileDesc *fd,
nsISupports** info)
{
NS_ENSURE_TRUE((socksVersion == 4) || (socksVersion == 5), NS_ERROR_NOT_INITIALIZED);
if (firstTime)
{
nsSOCKSIOLayerIdentity = PR_GetUniqueIdentity("SOCKS layer");
nsSOCKSIOLayerMethods = *PR_GetDefaultIOMethods();
nsSOCKSIOLayerMethods.connect = nsSOCKSIOLayerConnect;
nsSOCKSIOLayerMethods.connectcontinue = nsSOCKSIOLayerConnectContinue;
nsSOCKSIOLayerMethods.poll = nsSOCKSIOLayerPoll;
nsSOCKSIOLayerMethods.bind = nsSOCKSIOLayerBind;
nsSOCKSIOLayerMethods.acceptread = nsSOCKSIOLayerAcceptRead;
nsSOCKSIOLayerMethods.getsockname = nsSOCKSIOLayerGetName;
nsSOCKSIOLayerMethods.getpeername = nsSOCKSIOLayerGetPeerName;
nsSOCKSIOLayerMethods.accept = nsSOCKSIOLayerAccept;
nsSOCKSIOLayerMethods.listen = nsSOCKSIOLayerListen;
nsSOCKSIOLayerMethods.close = nsSOCKSIOLayerClose;
firstTime = false;
#if defined(PR_LOGGING)
gSOCKSLog = PR_NewLogModule("SOCKS");
#endif
}
LOGDEBUG(("Entering nsSOCKSIOLayerAddToSocket()."));
PRFileDesc * layer;
PRStatus rv;
layer = PR_CreateIOLayerStub(nsSOCKSIOLayerIdentity, &nsSOCKSIOLayerMethods);
if (! layer)
{
LOGERROR(("PR_CreateIOLayerStub() failed."));
return NS_ERROR_FAILURE;
}
nsSOCKSSocketInfo * infoObject = new nsSOCKSSocketInfo();
if (!infoObject)
{
// clean up IOLayerStub
LOGERROR(("Failed to create nsSOCKSSocketInfo()."));
PR_DELETE(layer);
return NS_ERROR_FAILURE;
}
NS_ADDREF(infoObject);
infoObject->Init(socksVersion, proxyHost, proxyPort, host, flags);
layer->secret = (PRFilePrivate*) infoObject;
rv = PR_PushIOLayer(fd, PR_GetLayersIdentity(fd), layer);
if (NS_FAILED(rv))
{
LOGERROR(("PR_PushIOLayer() failed. rv = %x.", rv));
NS_RELEASE(infoObject);
PR_DELETE(layer);
return NS_ERROR_FAILURE;
}
*info = infoObject;
NS_ADDREF(*info);
return NS_OK;
}