gecko/security/nss/lib/freebl/mpi/Makefile

282 lines
8.2 KiB
Makefile
Raw Normal View History

2008-06-06 05:40:11 -07:00
#
# Makefile for MPI library
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the MPI Arbitrary Precision Integer Arithmetic library.
#
# The Initial Developer of the Original Code is
# Michael J. Fromberger <sting@linguist.dartmouth.edu>.
# Portions created by the Initial Developer are Copyright (C) 1998
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Netscape Communications Corporation
# Richard C. Swift (swift@netscape.com)
# Douglas Stebila <douglas@stebila.ca>, Sun Microsystems Laboratories
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# $Id: Makefile,v 1.26 2007/05/09 00:09:37 neil.williams%sun.com Exp $
#
## Define CC to be the C compiler you wish to use. The GNU cc
## compiler (gcc) should work, at the very least
#CC=cc
#CC=gcc
##
## Define PERL to point to your local Perl interpreter. It
## should be Perl 5.x, although it's conceivable that Perl 4
## might work ... I haven't tested it.
##
#PERL=/usr/bin/perl
#PERL=perl
include target.mk
CFLAGS+= $(XCFLAGS)
##
## Define LIBS to include any libraries you need to link against.
## If NO_TABLE is define, LIBS should include '-lm' or whatever is
## necessary to bring in the math library. Otherwise, it can be
## left alone, unless your system has other peculiar requirements.
##
LIBS=#-lmalloc#-lefence#-lm
##
## Define RANLIB to be the library header randomizer; you might not
## need this on some systems (just set it to 'echo' on these systems,
## such as IRIX)
##
RANLIB=echo
##
## This is the version string used for the documentation and
## building the distribution tarball. Don't mess with it unless
## you are releasing a new version
VERS=1.7p6
## ----------------------------------------------------------------------
## You probably don't need to change anything below this line...
##
##
## This is the list of source files that need to be packed into
## the distribution file
SRCS= mpi.c mpprime.c mplogic.c mp_gf2m.c mpmontg.c mpi-test.c primes.c \
mpcpucache.c tests/ \
utils/gcd.c utils/invmod.c utils/lap.c \
utils/ptab.pl utils/sieve.c utils/isprime.c\
utils/dec2hex.c utils/hex2dec.c utils/bbs_rand.c \
utils/bbsrand.c utils/prng.c utils/primegen.c \
utils/basecvt.c utils/makeprime.c\
utils/fact.c utils/exptmod.c utils/pi.c utils/metime.c \
utils/mpi.h utils/mpprime.h mulsqr.c \
make-test-arrays test-arrays.txt all-tests make-logtab \
types.pl stats timetest multest
## These are the header files that go into the distribution file
HDRS=mpi.h mpi-config.h utils/mpi.h utils/mpi-config.h mpprime.h mplogic.h mp_gf2m.h \
mp_gf2m-priv.h utils/bbs_rand.h tests/mpi.h tests/mpprime.h
## These are the documentation files that go into the distribution file
DOCS=README doc utils/README utils/PRIMES
## This is the list of tools built by 'make tools'
TOOLS=gcd invmod isprime lap dec2hex hex2dec primegen prng \
basecvt fact exptmod pi makeprime identest
LIBOBJS = mpprime.o mpmontg.o mplogic.o mp_gf2m.o mpi.o mpcpucache.o $(AS_OBJS)
LIBHDRS = mpi-config.h mpi-priv.h mpi.h
APPHDRS = mpi-config.h mpi.h mplogic.h mp_gf2m.h mpprime.h
help:
@ echo ""
@ echo "The following targets can be built with this Makefile:"
@ echo ""
@ echo "libmpi.a - arithmetic and prime testing library"
@ echo "mpi-test - test driver (requires MP_IOFUNC)"
@ echo "tools - command line tools"
@ echo "doc - manual pages for tools"
@ echo "clean - clean up objects and such"
@ echo "distclean - get ready for distribution"
@ echo "dist - distribution tarball"
@ echo ""
.SUFFIXES: .c .o .i
.c.i:
$(CC) $(CFLAGS) -E $< > $@
#.c.o: $*.h $*.c
# $(CC) $(CFLAGS) -c $<
#---------------------------------------
$(LIBOBJS): $(LIBHDRS)
logtab.h: make-logtab
$(PERL) make-logtab > logtab.h
mpi.o: mpi.c logtab.h $(LIBHDRS)
mplogic.o: mplogic.c mpi-priv.h mplogic.h $(LIBHDRS)
mp_gf2m.o: mp_gf2m.c mpi-priv.h mp_gf2m.h mp_gf2m-priv.h $(LIBHDRS)
mpmontg.o: mpmontg.c mpi-priv.h mplogic.h mpprime.h $(LIBHDRS)
mpprime.o: mpprime.c mpi-priv.h mpprime.h mplogic.h primes.c $(LIBHDRS)
mpcpucache.o: mpcpucache.c $(LIBHDRS)
mpi_mips.o: mpi_mips.s
$(CC) -o $@ $(ASFLAGS) -c mpi_mips.s
mpi_sparc.o : montmulf.h
mpv_sparcv9.s: vis_64.il mpv_sparc.c
$(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_64.il mpv_sparc.c
mpv_sparcv8.s: vis_64.il mpv_sparc.c
$(CC) -o $@ $(SOLARIS_FPU_FLAGS) -S vis_32.il mpv_sparc.c
montmulfv8.o montmulfv9.o mpv_sparcv8.o mpv_sparcv9.o : %.o : %.s
$(CC) -o $@ $(SOLARIS_ASM_FLAGS) -c $<
# This rule is used to build the .s sources, which are then hand optimized.
#montmulfv8.s montmulfv9.s : montmulf%.s : montmulf%.il montmulf.c montmulf.h
# $(CC) -o $@ $(SOLARIS_ASM_FLAGS) -S montmulf$*.il montmulf.c
libmpi.a: $(LIBOBJS)
ar -cvr libmpi.a $(LIBOBJS)
$(RANLIB) libmpi.a
lib libs: libmpi.a
mpi.i: mpi.h
#---------------------------------------
MPTESTOBJS = mptest1.o mptest2.o mptest3.o mptest3a.o mptest4.o mptest4a.o \
mptest4b.o mptest6.o mptest7.o mptest8.o mptest9.o mptestb.o
MPTESTS = $(MPTESTOBJS:.o=)
$(MPTESTOBJS): mptest%.o: tests/mptest-%.c $(LIBHDRS)
$(CC) $(CFLAGS) -o $@ -c $<
$(MPTESTS): mptest%: mptest%.o libmpi.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
tests: mptest1 mptest2 mptest3 mptest3a mptest4 mptest4a mptest4b mptest6 \
mptestb bbsrand
utests: mptest7 mptest8 mptest9
#---------------------------------------
EXTRAOBJS = bbsrand.o bbs_rand.o prng.o
UTILOBJS = primegen.o metime.o identest.o basecvt.o fact.o exptmod.o pi.o \
makeprime.o gcd.o invmod.o lap.o isprime.o \
dec2hex.o hex2dec.o
UTILS = $(UTILOBJS:.o=)
$(UTILS): % : %.o libmpi.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
$(UTILOBJS) $(EXTRAOBJS): %.o : utils/%.c $(LIBHDRS)
$(CC) $(CFLAGS) -o $@ -c $<
prng: prng.o bbs_rand.o libmpi.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
bbsrand: bbsrand.o bbs_rand.o libmpi.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
utils: $(UTILS) prng bbsrand
#---------------------------------------
test-info.c: test-arrays.txt
$(PERL) make-test-arrays test-arrays.txt > test-info.c
mpi-test.o: mpi-test.c test-info.c $(LIBHDRS)
$(CC) $(CFLAGS) -o $@ -c $<
mpi-test: mpi-test.o libmpi.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
mdxptest.o: mdxptest.c $(LIBHDRS) mpi-priv.h
mdxptest: mdxptest.o libmpi.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
mulsqr.o: mulsqr.c logtab.h mpi.h mpi-config.h mpprime.h
$(CC) $(CFLAGS) -DMP_SQUARE=1 -o $@ -c mulsqr.c
mulsqr: mulsqr.o libmpi.a
$(CC) $(CFLAGS) -o $@ $^ $(LIBS)
#---------------------------------------
alltests: tests utests mpi-test
tools: $(TOOLS)
doc:
(cd doc; ./build)
clean:
rm -f *.o *.a *.i
rm -f core
rm -f *~ .*~
rm -f utils/*.o
rm -f utils/core
rm -f utils/*~ utils/.*~
clobber: clean
rm -f $(TOOLS) $(UTILS)
distclean: clean
rm -f mptest? mpi-test metime mulsqr karatsuba
rm -f mptest?a mptest?b
rm -f utils/mptest?
rm -f test-info.c logtab.h
rm -f libmpi.a
rm -f $(TOOLS)
dist: Makefile $(HDRS) $(SRCS) $(DOCS)
tar -cvf mpi-$(VERS).tar Makefile $(HDRS) $(SRCS) $(DOCS)
pgps -ab mpi-$(VERS).tar
chmod +r mpi-$(VERS).tar.asc
gzip -9 mpi-$(VERS).tar
# END