gecko/netwerk/streamconv/converters/nsMultiMixedConv.h

195 lines
7.3 KiB
C
Raw Normal View History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef __nsmultimixedconv__h__
#define __nsmultimixedconv__h__
#include "nsIStreamConverter.h"
#include "nsIChannel.h"
#include "nsIURI.h"
#include "nsString.h"
#include "nsXPIDLString.h"
#include "nsCOMPtr.h"
#include "nsInt64.h"
#include "nsIByteRangeRequest.h"
#include "nsIMultiPartChannel.h"
#include "nsAutoPtr.h"
#define NS_MULTIMIXEDCONVERTER_CID \
{ /* 7584CE90-5B25-11d3-A175-0050041CAF44 */ \
0x7584ce90, \
0x5b25, \
0x11d3, \
{0xa1, 0x75, 0x0, 0x50, 0x4, 0x1c, 0xaf, 0x44} \
}
//
// nsPartChannel is a "dummy" channel which represents an individual part of
// a multipart/mixed stream...
//
// Instances on this channel are passed out to the consumer through the
// nsIStreamListener interface.
//
class nsPartChannel : public nsIChannel,
public nsIByteRangeRequest,
public nsIMultiPartChannel
{
public:
nsPartChannel(nsIChannel *aMultipartChannel, PRUint32 aPartID);
void InitializeByteRange(PRInt64 aStart, PRInt64 aEnd);
void SetIsLastPart() { mIsLastPart = PR_TRUE; }
NS_DECL_ISUPPORTS
NS_DECL_NSIREQUEST
NS_DECL_NSICHANNEL
NS_DECL_NSIBYTERANGEREQUEST
NS_DECL_NSIMULTIPARTCHANNEL
protected:
~nsPartChannel();
protected:
nsCOMPtr<nsIChannel> mMultipartChannel;
nsresult mStatus;
nsLoadFlags mLoadFlags;
nsCOMPtr<nsILoadGroup> mLoadGroup;
nsCString mContentType;
nsCString mContentCharset;
nsCString mContentDisposition;
nsUint64 mContentLength;
PRBool mIsByteRangeRequest;
nsInt64 mByteRangeStart;
nsInt64 mByteRangeEnd;
PRUint32 mPartID; // unique ID that can be used to identify
// this part of the multipart document
PRBool mIsLastPart;
};
// The nsMultiMixedConv stream converter converts a stream of type "multipart/x-mixed-replace"
// to it's subparts. There was some debate as to whether or not the functionality desired
// when HTTP confronted this type required a stream converter. After all, this type really
// prompts various viewer related actions rather than stream conversion. There simply needs
// to be a piece in place that can strip out the multiple parts of a stream of this type, and
// "display" them accordingly.
//
// With that said, this "stream converter" spends more time packaging up the sub parts of the
// main stream and sending them off the destination stream listener, than doing any real
// stream parsing/converting.
//
// WARNING: This converter requires that it's destination stream listener be able to handle
// multiple OnStartRequest(), OnDataAvailable(), and OnStopRequest() call combinations.
// Each series represents the beginning, data production, and ending phase of each sub-
// part of the original stream.
//
// NOTE: this MIME-type is used by HTTP, *not* SMTP, or IMAP.
//
// NOTE: For reference, a general description of how this MIME type should be handled via
// HTTP, see http://home.netscape.com/assist/net_sites/pushpull.html . Note that
// real world server content deviates considerably from this overview.
//
// Implementation assumptions:
// Assumed structue:
// --BoundaryToken[\r]\n
// content-type: foo/bar[\r]\n
// ... (other headers if any)
// [\r]\n (second line feed to delimit end of headers)
// data
// --BoundaryToken-- (end delimited by final "--")
//
// linebreaks can be either CRLF or LFLF. linebreaks preceeding
// boundary tokens are considered part of the data. BoundaryToken
// is any opaque string.
//
//
class nsMultiMixedConv : public nsIStreamConverter {
public:
NS_DECL_ISUPPORTS
NS_DECL_NSISTREAMCONVERTER
NS_DECL_NSISTREAMLISTENER
NS_DECL_NSIREQUESTOBSERVER
nsMultiMixedConv();
virtual ~nsMultiMixedConv();
protected:
nsresult SendStart(nsIChannel *aChannel);
nsresult SendStop(nsresult aStatus);
nsresult SendData(char *aBuffer, PRUint32 aLen);
nsresult ParseHeaders(nsIChannel *aChannel, char *&aPtr,
PRUint32 &aLen, PRBool *_retval);
PRInt32 PushOverLine(char *&aPtr, PRUint32 &aLen);
char *FindToken(char *aCursor, PRUint32 aLen);
nsresult BufferData(char *aData, PRUint32 aLen);
// member data
PRBool mNewPart; // Are we processing the beginning of a part?
PRBool mProcessingHeaders;
nsCOMPtr<nsIStreamListener> mFinalListener; // this guy gets the converted data via his OnDataAvailable()
nsCString mToken;
PRUint32 mTokenLen;
nsRefPtr<nsPartChannel> mPartChannel; // the channel for the given part we're processing.
// one channel per part.
nsCOMPtr<nsISupports> mContext;
nsCString mContentType;
nsCString mContentDisposition;
nsUint64 mContentLength;
char *mBuffer;
PRUint32 mBufLen;
nsUint64 mTotalSent;
PRBool mFirstOnData; // used to determine if we're in our first OnData callback.
// The following members are for tracking the byte ranges in
// multipart/mixed content which specified the 'Content-Range:'
// header...
nsInt64 mByteRangeStart;
nsInt64 mByteRangeEnd;
PRBool mIsByteRangeRequest;
PRUint32 mCurrentPartID;
};
#endif /* __nsmultimixedconv__h__ */