2008-06-06 05:40:11 -07:00
/* ***** BEGIN LICENSE BLOCK *****
* Version : MPL 1.1 / GPL 2.0 / LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 ( the " License " ) ; you may not use this file except in compliance with
* the License . You may obtain a copy of the License at
* http : //www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an " AS IS " basis ,
* WITHOUT WARRANTY OF ANY KIND , either express or implied . See the License
* for the specific language governing rights and limitations under the
* License .
*
* The Original Code is the Netscape security libraries .
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation .
* Portions created by the Initial Developer are Copyright ( C ) 1994 - 2000
* the Initial Developer . All Rights Reserved .
*
* Contributor ( s ) :
*
* Alternatively , the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later ( the " GPL " ) , or
* the GNU Lesser General Public License Version 2.1 or later ( the " LGPL " ) ,
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above . If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL , and not to allow others to
* use your version of this file under the terms of the MPL , indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL . If you do not delete
* the provisions above , a recipient may use your version of this file under
* the terms of any one of the MPL , the GPL or the LGPL .
*
* * * * * * END LICENSE BLOCK * * * * * */
/* General security error codes */
/* Caller must #include "secerr.h" */
ER3 ( SEC_ERROR_IO , SEC_ERROR_BASE + 0 ,
" An I/O error occurred during security authorization. " )
ER3 ( SEC_ERROR_LIBRARY_FAILURE , SEC_ERROR_BASE + 1 ,
" security library failure. " )
ER3 ( SEC_ERROR_BAD_DATA , SEC_ERROR_BASE + 2 ,
" security library: received bad data. " )
ER3 ( SEC_ERROR_OUTPUT_LEN , SEC_ERROR_BASE + 3 ,
" security library: output length error. " )
ER3 ( SEC_ERROR_INPUT_LEN , SEC_ERROR_BASE + 4 ,
" security library has experienced an input length error. " )
ER3 ( SEC_ERROR_INVALID_ARGS , SEC_ERROR_BASE + 5 ,
" security library: invalid arguments. " )
ER3 ( SEC_ERROR_INVALID_ALGORITHM , SEC_ERROR_BASE + 6 ,
" security library: invalid algorithm. " )
ER3 ( SEC_ERROR_INVALID_AVA , SEC_ERROR_BASE + 7 ,
" security library: invalid AVA. " )
ER3 ( SEC_ERROR_INVALID_TIME , SEC_ERROR_BASE + 8 ,
" Improperly formatted time string. " )
ER3 ( SEC_ERROR_BAD_DER , SEC_ERROR_BASE + 9 ,
" security library: improperly formatted DER-encoded message. " )
ER3 ( SEC_ERROR_BAD_SIGNATURE , SEC_ERROR_BASE + 10 ,
" Peer's certificate has an invalid signature. " )
ER3 ( SEC_ERROR_EXPIRED_CERTIFICATE , SEC_ERROR_BASE + 11 ,
" Peer's Certificate has expired. " )
ER3 ( SEC_ERROR_REVOKED_CERTIFICATE , SEC_ERROR_BASE + 12 ,
" Peer's Certificate has been revoked. " )
ER3 ( SEC_ERROR_UNKNOWN_ISSUER , SEC_ERROR_BASE + 13 ,
" Peer's Certificate issuer is not recognized. " )
ER3 ( SEC_ERROR_BAD_KEY , SEC_ERROR_BASE + 14 ,
" Peer's public key is invalid. " )
ER3 ( SEC_ERROR_BAD_PASSWORD , SEC_ERROR_BASE + 15 ,
" The security password entered is incorrect. " )
ER3 ( SEC_ERROR_RETRY_PASSWORD , SEC_ERROR_BASE + 16 ,
" New password entered incorrectly. Please try again. " )
ER3 ( SEC_ERROR_NO_NODELOCK , SEC_ERROR_BASE + 17 ,
" security library: no nodelock. " )
ER3 ( SEC_ERROR_BAD_DATABASE , SEC_ERROR_BASE + 18 ,
" security library: bad database. " )
ER3 ( SEC_ERROR_NO_MEMORY , SEC_ERROR_BASE + 19 ,
" security library: memory allocation failure. " )
ER3 ( SEC_ERROR_UNTRUSTED_ISSUER , SEC_ERROR_BASE + 20 ,
" Peer's certificate issuer has been marked as not trusted by the user. " )
ER3 ( SEC_ERROR_UNTRUSTED_CERT , SEC_ERROR_BASE + 21 ,
" Peer's certificate has been marked as not trusted by the user. " )
ER3 ( SEC_ERROR_DUPLICATE_CERT , ( SEC_ERROR_BASE + 22 ) ,
" Certificate already exists in your database. " )
ER3 ( SEC_ERROR_DUPLICATE_CERT_NAME , ( SEC_ERROR_BASE + 23 ) ,
" Downloaded certificate's name duplicates one already in your database. " )
ER3 ( SEC_ERROR_ADDING_CERT , ( SEC_ERROR_BASE + 24 ) ,
" Error adding certificate to database. " )
ER3 ( SEC_ERROR_FILING_KEY , ( SEC_ERROR_BASE + 25 ) ,
" Error refiling the key for this certificate. " )
ER3 ( SEC_ERROR_NO_KEY , ( SEC_ERROR_BASE + 26 ) ,
" The private key for this certificate cannot be found in key database " )
ER3 ( SEC_ERROR_CERT_VALID , ( SEC_ERROR_BASE + 27 ) ,
" This certificate is valid. " )
ER3 ( SEC_ERROR_CERT_NOT_VALID , ( SEC_ERROR_BASE + 28 ) ,
" This certificate is not valid. " )
ER3 ( SEC_ERROR_CERT_NO_RESPONSE , ( SEC_ERROR_BASE + 29 ) ,
" Cert Library: No Response " )
ER3 ( SEC_ERROR_EXPIRED_ISSUER_CERTIFICATE , ( SEC_ERROR_BASE + 30 ) ,
" The certificate issuer's certificate has expired. Check your system date and time. " )
ER3 ( SEC_ERROR_CRL_EXPIRED , ( SEC_ERROR_BASE + 31 ) ,
" The CRL for the certificate's issuer has expired. Update it or check your system date and time. " )
ER3 ( SEC_ERROR_CRL_BAD_SIGNATURE , ( SEC_ERROR_BASE + 32 ) ,
" The CRL for the certificate's issuer has an invalid signature. " )
ER3 ( SEC_ERROR_CRL_INVALID , ( SEC_ERROR_BASE + 33 ) ,
" New CRL has an invalid format. " )
ER3 ( SEC_ERROR_EXTENSION_VALUE_INVALID , ( SEC_ERROR_BASE + 34 ) ,
" Certificate extension value is invalid. " )
ER3 ( SEC_ERROR_EXTENSION_NOT_FOUND , ( SEC_ERROR_BASE + 35 ) ,
" Certificate extension not found. " )
ER3 ( SEC_ERROR_CA_CERT_INVALID , ( SEC_ERROR_BASE + 36 ) ,
" Issuer certificate is invalid. " )
ER3 ( SEC_ERROR_PATH_LEN_CONSTRAINT_INVALID , ( SEC_ERROR_BASE + 37 ) ,
" Certificate path length constraint is invalid. " )
ER3 ( SEC_ERROR_CERT_USAGES_INVALID , ( SEC_ERROR_BASE + 38 ) ,
" Certificate usages field is invalid. " )
ER3 ( SEC_INTERNAL_ONLY , ( SEC_ERROR_BASE + 39 ) ,
" **Internal ONLY module** " )
ER3 ( SEC_ERROR_INVALID_KEY , ( SEC_ERROR_BASE + 40 ) ,
" The key does not support the requested operation. " )
ER3 ( SEC_ERROR_UNKNOWN_CRITICAL_EXTENSION , ( SEC_ERROR_BASE + 41 ) ,
" Certificate contains unknown critical extension. " )
ER3 ( SEC_ERROR_OLD_CRL , ( SEC_ERROR_BASE + 42 ) ,
" New CRL is not later than the current one. " )
ER3 ( SEC_ERROR_NO_EMAIL_CERT , ( SEC_ERROR_BASE + 43 ) ,
" Not encrypted or signed: you do not yet have an email certificate. " )
ER3 ( SEC_ERROR_NO_RECIPIENT_CERTS_QUERY , ( SEC_ERROR_BASE + 44 ) ,
" Not encrypted: you do not have certificates for each of the recipients. " )
ER3 ( SEC_ERROR_NOT_A_RECIPIENT , ( SEC_ERROR_BASE + 45 ) ,
" Cannot decrypt: you are not a recipient, or matching certificate and \
private key not found . " )
ER3 ( SEC_ERROR_PKCS7_KEYALG_MISMATCH , ( SEC_ERROR_BASE + 46 ) ,
" Cannot decrypt: key encryption algorithm does not match your certificate. " )
ER3 ( SEC_ERROR_PKCS7_BAD_SIGNATURE , ( SEC_ERROR_BASE + 47 ) ,
" Signature verification failed: no signer found, too many signers found, \
or improper or corrupted data . " )
ER3 ( SEC_ERROR_UNSUPPORTED_KEYALG , ( SEC_ERROR_BASE + 48 ) ,
" Unsupported or unknown key algorithm. " )
ER3 ( SEC_ERROR_DECRYPTION_DISALLOWED , ( SEC_ERROR_BASE + 49 ) ,
" Cannot decrypt: encrypted using a disallowed algorithm or key size. " )
/* Fortezza Alerts */
ER3 ( XP_SEC_FORTEZZA_BAD_CARD , ( SEC_ERROR_BASE + 50 ) ,
" Fortezza card has not been properly initialized. \
Please remove it and return it to your issuer . " )
ER3 ( XP_SEC_FORTEZZA_NO_CARD , ( SEC_ERROR_BASE + 51 ) ,
" No Fortezza cards Found " )
ER3 ( XP_SEC_FORTEZZA_NONE_SELECTED , ( SEC_ERROR_BASE + 52 ) ,
" No Fortezza card selected " )
ER3 ( XP_SEC_FORTEZZA_MORE_INFO , ( SEC_ERROR_BASE + 53 ) ,
" Please select a personality to get more info on " )
ER3 ( XP_SEC_FORTEZZA_PERSON_NOT_FOUND , ( SEC_ERROR_BASE + 54 ) ,
" Personality not found " )
ER3 ( XP_SEC_FORTEZZA_NO_MORE_INFO , ( SEC_ERROR_BASE + 55 ) ,
" No more information on that Personality " )
ER3 ( XP_SEC_FORTEZZA_BAD_PIN , ( SEC_ERROR_BASE + 56 ) ,
" Invalid Pin " )
ER3 ( XP_SEC_FORTEZZA_PERSON_ERROR , ( SEC_ERROR_BASE + 57 ) ,
" Couldn't initialize Fortezza personalities. " )
/* end fortezza alerts. */
ER3 ( SEC_ERROR_NO_KRL , ( SEC_ERROR_BASE + 58 ) ,
" No KRL for this site's certificate has been found. " )
ER3 ( SEC_ERROR_KRL_EXPIRED , ( SEC_ERROR_BASE + 59 ) ,
" The KRL for this site's certificate has expired. " )
ER3 ( SEC_ERROR_KRL_BAD_SIGNATURE , ( SEC_ERROR_BASE + 60 ) ,
" The KRL for this site's certificate has an invalid signature. " )
ER3 ( SEC_ERROR_REVOKED_KEY , ( SEC_ERROR_BASE + 61 ) ,
" The key for this site's certificate has been revoked. " )
ER3 ( SEC_ERROR_KRL_INVALID , ( SEC_ERROR_BASE + 62 ) ,
" New KRL has an invalid format. " )
ER3 ( SEC_ERROR_NEED_RANDOM , ( SEC_ERROR_BASE + 63 ) ,
" security library: need random data. " )
ER3 ( SEC_ERROR_NO_MODULE , ( SEC_ERROR_BASE + 64 ) ,
" security library: no security module can perform the requested operation. " )
ER3 ( SEC_ERROR_NO_TOKEN , ( SEC_ERROR_BASE + 65 ) ,
" The security card or token does not exist, needs to be initialized, or has been removed. " )
ER3 ( SEC_ERROR_READ_ONLY , ( SEC_ERROR_BASE + 66 ) ,
" security library: read-only database. " )
ER3 ( SEC_ERROR_NO_SLOT_SELECTED , ( SEC_ERROR_BASE + 67 ) ,
" No slot or token was selected. " )
ER3 ( SEC_ERROR_CERT_NICKNAME_COLLISION , ( SEC_ERROR_BASE + 68 ) ,
" A certificate with the same nickname already exists. " )
ER3 ( SEC_ERROR_KEY_NICKNAME_COLLISION , ( SEC_ERROR_BASE + 69 ) ,
" A key with the same nickname already exists. " )
ER3 ( SEC_ERROR_SAFE_NOT_CREATED , ( SEC_ERROR_BASE + 70 ) ,
" error while creating safe object " )
ER3 ( SEC_ERROR_BAGGAGE_NOT_CREATED , ( SEC_ERROR_BASE + 71 ) ,
" error while creating baggage object " )
ER3 ( XP_JAVA_REMOVE_PRINCIPAL_ERROR , ( SEC_ERROR_BASE + 72 ) ,
" Couldn't remove the principal " )
ER3 ( XP_JAVA_DELETE_PRIVILEGE_ERROR , ( SEC_ERROR_BASE + 73 ) ,
" Couldn't delete the privilege " )
ER3 ( XP_JAVA_CERT_NOT_EXISTS_ERROR , ( SEC_ERROR_BASE + 74 ) ,
" This principal doesn't have a certificate " )
ER3 ( SEC_ERROR_BAD_EXPORT_ALGORITHM , ( SEC_ERROR_BASE + 75 ) ,
" Required algorithm is not allowed. " )
ER3 ( SEC_ERROR_EXPORTING_CERTIFICATES , ( SEC_ERROR_BASE + 76 ) ,
" Error attempting to export certificates. " )
ER3 ( SEC_ERROR_IMPORTING_CERTIFICATES , ( SEC_ERROR_BASE + 77 ) ,
" Error attempting to import certificates. " )
ER3 ( SEC_ERROR_PKCS12_DECODING_PFX , ( SEC_ERROR_BASE + 78 ) ,
" Unable to import. Decoding error. File not valid. " )
ER3 ( SEC_ERROR_PKCS12_INVALID_MAC , ( SEC_ERROR_BASE + 79 ) ,
" Unable to import. Invalid MAC. Incorrect password or corrupt file. " )
ER3 ( SEC_ERROR_PKCS12_UNSUPPORTED_MAC_ALGORITHM , ( SEC_ERROR_BASE + 80 ) ,
" Unable to import. MAC algorithm not supported. " )
ER3 ( SEC_ERROR_PKCS12_UNSUPPORTED_TRANSPORT_MODE , ( SEC_ERROR_BASE + 81 ) ,
" Unable to import. Only password integrity and privacy modes supported. " )
ER3 ( SEC_ERROR_PKCS12_CORRUPT_PFX_STRUCTURE , ( SEC_ERROR_BASE + 82 ) ,
" Unable to import. File structure is corrupt. " )
ER3 ( SEC_ERROR_PKCS12_UNSUPPORTED_PBE_ALGORITHM , ( SEC_ERROR_BASE + 83 ) ,
" Unable to import. Encryption algorithm not supported. " )
ER3 ( SEC_ERROR_PKCS12_UNSUPPORTED_VERSION , ( SEC_ERROR_BASE + 84 ) ,
" Unable to import. File version not supported. " )
ER3 ( SEC_ERROR_PKCS12_PRIVACY_PASSWORD_INCORRECT , ( SEC_ERROR_BASE + 85 ) ,
" Unable to import. Incorrect privacy password. " )
ER3 ( SEC_ERROR_PKCS12_CERT_COLLISION , ( SEC_ERROR_BASE + 86 ) ,
" Unable to import. Same nickname already exists in database. " )
ER3 ( SEC_ERROR_USER_CANCELLED , ( SEC_ERROR_BASE + 87 ) ,
" The user pressed cancel. " )
ER3 ( SEC_ERROR_PKCS12_DUPLICATE_DATA , ( SEC_ERROR_BASE + 88 ) ,
" Not imported, already in database. " )
ER3 ( SEC_ERROR_MESSAGE_SEND_ABORTED , ( SEC_ERROR_BASE + 89 ) ,
" Message not sent. " )
ER3 ( SEC_ERROR_INADEQUATE_KEY_USAGE , ( SEC_ERROR_BASE + 90 ) ,
" Certificate key usage inadequate for attempted operation. " )
ER3 ( SEC_ERROR_INADEQUATE_CERT_TYPE , ( SEC_ERROR_BASE + 91 ) ,
" Certificate type not approved for application. " )
ER3 ( SEC_ERROR_CERT_ADDR_MISMATCH , ( SEC_ERROR_BASE + 92 ) ,
" Address in signing certificate does not match address in message headers. " )
ER3 ( SEC_ERROR_PKCS12_UNABLE_TO_IMPORT_KEY , ( SEC_ERROR_BASE + 93 ) ,
" Unable to import. Error attempting to import private key. " )
ER3 ( SEC_ERROR_PKCS12_IMPORTING_CERT_CHAIN , ( SEC_ERROR_BASE + 94 ) ,
" Unable to import. Error attempting to import certificate chain. " )
ER3 ( SEC_ERROR_PKCS12_UNABLE_TO_LOCATE_OBJECT_BY_NAME , ( SEC_ERROR_BASE + 95 ) ,
" Unable to export. Unable to locate certificate or key by nickname. " )
ER3 ( SEC_ERROR_PKCS12_UNABLE_TO_EXPORT_KEY , ( SEC_ERROR_BASE + 96 ) ,
" Unable to export. Private Key could not be located and exported. " )
ER3 ( SEC_ERROR_PKCS12_UNABLE_TO_WRITE , ( SEC_ERROR_BASE + 97 ) ,
" Unable to export. Unable to write the export file. " )
ER3 ( SEC_ERROR_PKCS12_UNABLE_TO_READ , ( SEC_ERROR_BASE + 98 ) ,
" Unable to import. Unable to read the import file. " )
ER3 ( SEC_ERROR_PKCS12_KEY_DATABASE_NOT_INITIALIZED , ( SEC_ERROR_BASE + 99 ) ,
" Unable to export. Key database corrupt or deleted. " )
ER3 ( SEC_ERROR_KEYGEN_FAIL , ( SEC_ERROR_BASE + 100 ) ,
" Unable to generate public/private key pair. " )
ER3 ( SEC_ERROR_INVALID_PASSWORD , ( SEC_ERROR_BASE + 101 ) ,
" Password entered is invalid. Please pick a different one. " )
ER3 ( SEC_ERROR_RETRY_OLD_PASSWORD , ( SEC_ERROR_BASE + 102 ) ,
" Old password entered incorrectly. Please try again. " )
ER3 ( SEC_ERROR_BAD_NICKNAME , ( SEC_ERROR_BASE + 103 ) ,
" Certificate nickname already in use. " )
ER3 ( SEC_ERROR_NOT_FORTEZZA_ISSUER , ( SEC_ERROR_BASE + 104 ) ,
" Peer FORTEZZA chain has a non-FORTEZZA Certificate. " )
ER3 ( SEC_ERROR_CANNOT_MOVE_SENSITIVE_KEY , ( SEC_ERROR_BASE + 105 ) ,
" A sensitive key cannot be moved to the slot where it is needed. " )
ER3 ( SEC_ERROR_JS_INVALID_MODULE_NAME , ( SEC_ERROR_BASE + 106 ) ,
" Invalid module name. " )
ER3 ( SEC_ERROR_JS_INVALID_DLL , ( SEC_ERROR_BASE + 107 ) ,
" Invalid module path/filename " )
ER3 ( SEC_ERROR_JS_ADD_MOD_FAILURE , ( SEC_ERROR_BASE + 108 ) ,
" Unable to add module " )
ER3 ( SEC_ERROR_JS_DEL_MOD_FAILURE , ( SEC_ERROR_BASE + 109 ) ,
" Unable to delete module " )
ER3 ( SEC_ERROR_OLD_KRL , ( SEC_ERROR_BASE + 110 ) ,
" New KRL is not later than the current one. " )
ER3 ( SEC_ERROR_CKL_CONFLICT , ( SEC_ERROR_BASE + 111 ) ,
" New CKL has different issuer than current CKL. Delete current CKL. " )
ER3 ( SEC_ERROR_CERT_NOT_IN_NAME_SPACE , ( SEC_ERROR_BASE + 112 ) ,
" The Certifying Authority for this certificate is not permitted to issue a \
certificate with this name . " )
ER3 ( SEC_ERROR_KRL_NOT_YET_VALID , ( SEC_ERROR_BASE + 113 ) ,
" The key revocation list for this certificate is not yet valid. " )
ER3 ( SEC_ERROR_CRL_NOT_YET_VALID , ( SEC_ERROR_BASE + 114 ) ,
" The certificate revocation list for this certificate is not yet valid. " )
ER3 ( SEC_ERROR_UNKNOWN_CERT , ( SEC_ERROR_BASE + 115 ) ,
" The requested certificate could not be found. " )
ER3 ( SEC_ERROR_UNKNOWN_SIGNER , ( SEC_ERROR_BASE + 116 ) ,
" The signer's certificate could not be found. " )
ER3 ( SEC_ERROR_CERT_BAD_ACCESS_LOCATION , ( SEC_ERROR_BASE + 117 ) ,
" The location for the certificate status server has invalid format. " )
ER3 ( SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE , ( SEC_ERROR_BASE + 118 ) ,
" The OCSP response cannot be fully decoded; it is of an unknown type. " )
ER3 ( SEC_ERROR_OCSP_BAD_HTTP_RESPONSE , ( SEC_ERROR_BASE + 119 ) ,
" The OCSP server returned unexpected/invalid HTTP data. " )
ER3 ( SEC_ERROR_OCSP_MALFORMED_REQUEST , ( SEC_ERROR_BASE + 120 ) ,
" The OCSP server found the request to be corrupted or improperly formed. " )
ER3 ( SEC_ERROR_OCSP_SERVER_ERROR , ( SEC_ERROR_BASE + 121 ) ,
" The OCSP server experienced an internal error. " )
ER3 ( SEC_ERROR_OCSP_TRY_SERVER_LATER , ( SEC_ERROR_BASE + 122 ) ,
" The OCSP server suggests trying again later. " )
ER3 ( SEC_ERROR_OCSP_REQUEST_NEEDS_SIG , ( SEC_ERROR_BASE + 123 ) ,
" The OCSP server requires a signature on this request. " )
ER3 ( SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST , ( SEC_ERROR_BASE + 124 ) ,
" The OCSP server has refused this request as unauthorized. " )
ER3 ( SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS , ( SEC_ERROR_BASE + 125 ) ,
" The OCSP server returned an unrecognizable status. " )
ER3 ( SEC_ERROR_OCSP_UNKNOWN_CERT , ( SEC_ERROR_BASE + 126 ) ,
" The OCSP server has no status for the certificate. " )
ER3 ( SEC_ERROR_OCSP_NOT_ENABLED , ( SEC_ERROR_BASE + 127 ) ,
" You must enable OCSP before performing this operation. " )
ER3 ( SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER , ( SEC_ERROR_BASE + 128 ) ,
" You must set the OCSP default responder before performing this operation. " )
ER3 ( SEC_ERROR_OCSP_MALFORMED_RESPONSE , ( SEC_ERROR_BASE + 129 ) ,
" The response from the OCSP server was corrupted or improperly formed. " )
ER3 ( SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE , ( SEC_ERROR_BASE + 130 ) ,
" The signer of the OCSP response is not authorized to give status for \
this certificate . " )
ER3 ( SEC_ERROR_OCSP_FUTURE_RESPONSE , ( SEC_ERROR_BASE + 131 ) ,
" The OCSP response is not yet valid (contains a date in the future). " )
ER3 ( SEC_ERROR_OCSP_OLD_RESPONSE , ( SEC_ERROR_BASE + 132 ) ,
" The OCSP response contains out-of-date information. " )
ER3 ( SEC_ERROR_DIGEST_NOT_FOUND , ( SEC_ERROR_BASE + 133 ) ,
" The CMS or PKCS #7 Digest was not found in signed message. " )
ER3 ( SEC_ERROR_UNSUPPORTED_MESSAGE_TYPE , ( SEC_ERROR_BASE + 134 ) ,
" The CMS or PKCS #7 Message type is unsupported. " )
ER3 ( SEC_ERROR_MODULE_STUCK , ( SEC_ERROR_BASE + 135 ) ,
" PKCS #11 module could not be removed because it is still in use. " )
ER3 ( SEC_ERROR_BAD_TEMPLATE , ( SEC_ERROR_BASE + 136 ) ,
" Could not decode ASN.1 data. Specified template was invalid. " )
ER3 ( SEC_ERROR_CRL_NOT_FOUND , ( SEC_ERROR_BASE + 137 ) ,
" No matching CRL was found. " )
ER3 ( SEC_ERROR_REUSED_ISSUER_AND_SERIAL , ( SEC_ERROR_BASE + 138 ) ,
" You are attempting to import a cert with the same issuer/serial as \
an existing cert , but that is not the same cert . " )
ER3 ( SEC_ERROR_BUSY , ( SEC_ERROR_BASE + 139 ) ,
" NSS could not shutdown. Objects are still in use. " )
ER3 ( SEC_ERROR_EXTRA_INPUT , ( SEC_ERROR_BASE + 140 ) ,
" DER-encoded message contained extra unused data. " )
ER3 ( SEC_ERROR_UNSUPPORTED_ELLIPTIC_CURVE , ( SEC_ERROR_BASE + 141 ) ,
" Unsupported elliptic curve. " )
ER3 ( SEC_ERROR_UNSUPPORTED_EC_POINT_FORM , ( SEC_ERROR_BASE + 142 ) ,
" Unsupported elliptic curve point form. " )
ER3 ( SEC_ERROR_UNRECOGNIZED_OID , ( SEC_ERROR_BASE + 143 ) ,
" Unrecognized Object Identifier. " )
ER3 ( SEC_ERROR_OCSP_INVALID_SIGNING_CERT , ( SEC_ERROR_BASE + 144 ) ,
" Invalid OCSP signing certificate in OCSP response. " )
ER3 ( SEC_ERROR_REVOKED_CERTIFICATE_CRL , ( SEC_ERROR_BASE + 145 ) ,
" Certificate is revoked in issuer's certificate revocation list. " )
ER3 ( SEC_ERROR_REVOKED_CERTIFICATE_OCSP , ( SEC_ERROR_BASE + 146 ) ,
" Issuer's OCSP responder reports certificate is revoked. " )
ER3 ( SEC_ERROR_CRL_INVALID_VERSION , ( SEC_ERROR_BASE + 147 ) ,
" Issuer's Certificate Revocation List has an unknown version number. " )
ER3 ( SEC_ERROR_CRL_V1_CRITICAL_EXTENSION , ( SEC_ERROR_BASE + 148 ) ,
" Issuer's V1 Certificate Revocation List has a critical extension. " )
ER3 ( SEC_ERROR_CRL_UNKNOWN_CRITICAL_EXTENSION , ( SEC_ERROR_BASE + 149 ) ,
" Issuer's V2 Certificate Revocation List has an unknown critical extension. " )
ER3 ( SEC_ERROR_UNKNOWN_OBJECT_TYPE , ( SEC_ERROR_BASE + 150 ) ,
" Unknown object type specified. " )
ER3 ( SEC_ERROR_INCOMPATIBLE_PKCS11 , ( SEC_ERROR_BASE + 151 ) ,
" PKCS #11 driver violates the spec in an incompatible way. " )
ER3 ( SEC_ERROR_NO_EVENT , ( SEC_ERROR_BASE + 152 ) ,
" No new slot event is available at this time. " )
ER3 ( SEC_ERROR_CRL_ALREADY_EXISTS , ( SEC_ERROR_BASE + 153 ) ,
" CRL already exists. " )
ER3 ( SEC_ERROR_NOT_INITIALIZED , ( SEC_ERROR_BASE + 154 ) ,
" NSS is not initialized. " )
ER3 ( SEC_ERROR_TOKEN_NOT_LOGGED_IN , ( SEC_ERROR_BASE + 155 ) ,
" The operation failed because the PKCS#11 token is not logged in. " )
ER3 ( SEC_ERROR_OCSP_RESPONDER_CERT_INVALID , ( SEC_ERROR_BASE + 156 ) ,
" Configured OCSP responder's certificate is invalid. " )
ER3 ( SEC_ERROR_OCSP_BAD_SIGNATURE , ( SEC_ERROR_BASE + 157 ) ,
" OCSP response has an invalid signature. " )
ER3 ( SEC_ERROR_OUT_OF_SEARCH_LIMITS , ( SEC_ERROR_BASE + 158 ) ,
" Cert validation search is out of search limits " )
ER3 ( SEC_ERROR_INVALID_POLICY_MAPPING , ( SEC_ERROR_BASE + 159 ) ,
" Policy mapping contains anypolicy " )
ER3 ( SEC_ERROR_POLICY_VALIDATION_FAILED , ( SEC_ERROR_BASE + 160 ) ,
" Cert chain fails policy validation " )
ER3 ( SEC_ERROR_UNKNOWN_AIA_LOCATION_TYPE , ( SEC_ERROR_BASE + 161 ) ,
" Unknown location type in cert AIA extension " )
ER3 ( SEC_ERROR_BAD_HTTP_RESPONSE , ( SEC_ERROR_BASE + 162 ) ,
" Server returned bad HTTP response " )
ER3 ( SEC_ERROR_BAD_LDAP_RESPONSE , ( SEC_ERROR_BASE + 163 ) ,
" Server returned bad LDAP response " )
ER3 ( SEC_ERROR_FAILED_TO_ENCODE_DATA , ( SEC_ERROR_BASE + 164 ) ,
" Failed to encode data with ASN1 encoder " )
ER3 ( SEC_ERROR_BAD_INFO_ACCESS_LOCATION , ( SEC_ERROR_BASE + 165 ) ,
" Bad information access location in cert extension " )
ER3 ( SEC_ERROR_LIBPKIX_INTERNAL , ( SEC_ERROR_BASE + 166 ) ,
2010-07-18 22:45:52 -07:00
" Libpkix internal error occurred during cert validation. " )
2008-10-22 17:38:29 -07:00
ER3 ( SEC_ERROR_PKCS11_GENERAL_ERROR , ( SEC_ERROR_BASE + 167 ) ,
" A PKCS #11 module returned CKR_GENERAL_ERROR, indicating that an unrecoverable error has occurred. " )
ER3 ( SEC_ERROR_PKCS11_FUNCTION_FAILED , ( SEC_ERROR_BASE + 168 ) ,
" A PKCS #11 module returned CKR_FUNCTION_FAILED, indicating that the requested function could not be performed. Trying the same operation again might succeed. " )
ER3 ( SEC_ERROR_PKCS11_DEVICE_ERROR , ( SEC_ERROR_BASE + 169 ) ,
" A PKCS #11 module returned CKR_DEVICE_ERROR, indicating that a problem has occurred with the token or slot. " )
2009-04-20 18:51:56 -07:00
ER3 ( SEC_ERROR_BAD_INFO_ACCESS_METHOD , ( SEC_ERROR_BASE + 170 ) ,
" Unknown information access method in certificate extension. " )
ER3 ( SEC_ERROR_CRL_IMPORT_FAILED , ( SEC_ERROR_BASE + 171 ) ,
" Error attempting to import a CRL. " )
2010-08-02 13:49:18 -07:00
ER3 ( SEC_ERROR_EXPIRED_PASSWORD , ( SEC_ERROR_BASE + 172 ) ,
" The password expired. " )
ER3 ( SEC_ERROR_LOCKED_PASSWORD , ( SEC_ERROR_BASE + 173 ) ,
" The password is locked. " )
2010-12-09 03:04:11 -08:00
ER3 ( SEC_ERROR_UNKNOWN_PKCS11_ERROR , ( SEC_ERROR_BASE + 174 ) ,
" Unknown PKCS #11 error. " )
ER3 ( SEC_ERROR_BAD_CRL_DP_URL , ( SEC_ERROR_BASE + 175 ) ,
" Invalid or unsupported URL in CRL distribution point name. " )
