gecko/media/liboggz/include/oggz/oggz_seek.h

/*
   Copyright (C) 2003 Commonwealth Scientific and Industrial Research
   Organisation (CSIRO) Australia

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
   are met:

   - Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.

   - Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.

   - Neither the name of CSIRO Australia nor the names of its
   contributors may be used to endorse or promote products derived from
   this software without specific prior written permission.

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE ORGANISATION OR
   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

#ifndef __OGGZ_SEEK_H__
#define __OGGZ_SEEK_H__

/** \file
 * Seeking within files
 */

/** \defgroup seek_api Oggz Seek API
 *
 * Oggz can seek on multitrack, multicodec bitstreams.
 *
 * \section seek_time Time seeking
 *
 * Support is built-in for seeking to time positions in
 * <a href="http://www.celt-codec.org/">CELT</a>,
 * <a href="http://www.annodex.net/">CMML</a>.
 * <a href="http://flac.sourceforge.net/">FLAC</a>,
 * <a href="http://wiki.xiph.org/OggPCM">OggPCM</a>,
 * <a href="http://www.speex.org/">Speex</a>,
 * <a href="http://www.theora.org/">Theora</a>
 * and <a href="http://www.vorbis.com/">Vorbis</a>.
 * Oggz is also compatible with 
 * <a href="http://www.annodex.net/">Annodex</a> streams, and supports seeking
 * on all tracks described in an
 * <a href="http://wiki.xiph.org/OggSkeleton">Ogg Skeleton</a> track.
 *
 * You need to open the file with the OGGZ_AUTO flag set:
 *
 * - Create an OGGZ handle for reading with \a flags = OGGZ_READ | OGGZ_AUTO
 * - Read data, ensuring that you have received all b_o_s pages before
 *   attempting to seek.
 *
 * Oggz will silently parse known codec headers and associate metrics
 * appropriately; if you attempt to seek before you have received all
 * b_o_s pages, Oggz will not have had a chance to parse the codec headers
 * and associate metrics.
 * It is safe to seek once you have received a packet with \a b_o_s == 0;
 * see the \link basics Ogg basics \endlink section for more details.
 *
 * \note Oggz parses these codec headers internally, and so liboggz is \b not
 * linked to libspeex, libvorbis, libflac, libtheora, libcmml or libannodex.
 *
 * For other data streams, you will need to provide a metric function;
 * see the section on \link metric Using OggzMetrics \endlink for details
 * of setting up and seeking with metrics.
 *
 * \section seek_bytes Byte seeking
 *
 * oggz_seek() provides low-level seeking to byte positions.
 *
 * \section seek_info More detail
 *
 * For a full description of the seeking methods possible in Ogg, see
 * \link seek_semantics Semantics of seeking in Ogg bitstreams \endlink.
 *
 * \{
 */

/**
 * Query the current offset in milliseconds, or custom units as
 * specified by a Metric function you have provided.
 * \param oggz An OGGZ handle
 * \returns the offset in milliseconds, or custom units
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 * \retval OGGZ_ERR_INVALID Operation not suitable for this OGGZ
 */
ogg_int64_t oggz_tell_units (OGGZ * oggz);

/**
 * Seek to an offset in milliseconds, or custom units as specified
 * by a Metric function you have provided.
 * \param oggz An OGGZ handle
 * \param units A number of milliseconds, or custom units
 * \param whence As defined in <stdio.h>: SEEK_SET, SEEK_CUR or SEEK_END
 * \returns the new file offset, or -1 on failure.
 */
ogg_int64_t oggz_seek_units (OGGZ * oggz, ogg_int64_t units, int whence);

/**
 * Provide the exact stored granulepos (from the page header) if relevant to
 * the current packet, or a constructed granulepos if the stored granulepos
 * does not belong to this packet, or -1 if this codec does not have support
 * for granulepos interpolation
 * \param oggz An OGGZ handle
 * \returns the granulepos of the \a current packet (if available)
 */
ogg_int64_t
oggz_tell_granulepos (OGGZ * oggz);

/**
 * Query the file offset in bytes corresponding to the data read.
 * \param oggz An OGGZ handle
 * \returns The current offset of oggz.
 *
 * \note When reading, the value returned by oggz_tell() reflects the
 * data offset of the start of the most recent packet processed, so that
 * when called from an OggzReadPacket callback it reflects the byte
 * offset of the start of the packet. As Oggz may have internally read
 * ahead, this may differ from the current offset of the associated file
 * descriptor.
 */
oggz_off_t oggz_tell (OGGZ * oggz);

/**
 * Seek to a specific byte offset
 * \param oggz An OGGZ handle
 * \param offset a byte offset
 * \param whence As defined in <stdio.h>: SEEK_SET, SEEK_CUR or SEEK_END
 * \returns the new file offset, or -1 on failure.
 */
oggz_off_t oggz_seek (OGGZ * oggz, oggz_off_t offset, int whence);

#ifdef _UNIMPLEMENTED
long oggz_seek_packets (OGGZ * oggz, long serialno, long packets, int whence);
#endif

/** \}
 */

/** \defgroup seek_semantics Semantics of seeking in Ogg bitstreams
 *
 * \section seek_semantics_intro Introduction
 *
 *         [*** This line works around a bug in doxygen ***]
 *
 *         [*** This line works around a bug in doxygen ***]
 *
 * The seeking semantics of the Ogg file format were outlined by Monty in
 * <a href="http://web.archive.org/web/20031201054855/http://www.xiph.org/archives/theora-dev/200209/0040.html"> a 
 * post to theora-dev</a> in September 2002. Quoting from that post, we
 * have the following assumptions:
 *
 * - Ogg is not a non-linear format. ... It is a media transport format
 *   designed to do nothing more than deliver content, in a stream, and
 *   have all the pieces arrive on time and in sync.
 * - The Ogg layer does not know the specifics of the codec data it's
 *   multiplexing into a stream. It knows nothing beyond 'Oooo, packets!',
 *   that the packets belong to different buckets, that the packets go in
 *   order, and that packets have position markers. Ogg does not even have
 *   a concept of 'time'; it only knows about the sequentially increasing,
 *   unitless position markers. It is up to higher layers which have
 *   access to the codec APIs to assign and convert units of framing or
 *   time.
 *
 * (For more details on the structure of Ogg streams, see the
 * \link basics Ogg Basics \endlink section).
 *
 * For data such as media, for which it is possible to provide a mapping
 * such as 'time', Oggz can efficiently navigate through an Ogg stream
 * by use of an OggzMetric callback, thus allowing automatic seeking to
 * points in 'time'.
 *
 * For common codecs you can ask Oggz to set this for you automatically by
 * instantiating the OGGZ handle with the OGGZ_AUTO flag set. For others
 * you can specify a multiplier with oggz_set_metric_linear(), or a generic
 * non-linear metric with oggz_set_metric().
 *
 */

/** \defgroup metric Using OggzMetric
 *
 * \section metric_intro Introduction
 *
 * An OggzMetric is a helper function for Oggz's seeking mechanism.
 *
 * If every position in an Ogg stream can be described by a metric such as
 * time, then it is possible to define a function that, given a serialno and
 * granulepos, returns a measurement in units such as milliseconds. Oggz
 * will use this function repeatedly while seeking in order to navigate
 * through the Ogg stream.
 *
 * The meaning of the units is arbitrary, but must be consistent across all
 * logical bitstreams. This allows Oggz to seek accurately through Ogg
 * bitstreams containing multiple logical bitstreams such as tracks of media.
 *
 * \section setting How to set metrics
 *
 * You don't need to set metrics for Speex, Vorbis, FLAC, Theora, CMML or
 * Annodex.
 * These can be handled \link seek_api automatically \endlink by Oggz.
 *
 * For most others it is simply a matter of providing a "granulerate":
 * a frame or sampling rate, if each packet's granulepos represents a
 * sample number.
 *
 * - Set the \a granule_rate_numerator and \a granule_rate_denominator
 *   appropriately using oggz_set_granulerate()
 *
 * Some codecs use a "granuleshift" to divide a granulepos into two halves;
 * the first describing a dependency on a previous packet, the second
 * giving the offset since that packet. This is used to mark keyframes and
 * intermediate frames.
 *
 * - Set the \a granuleshift appropriately using oggz_set_granuleshift()
 *
 * \subsection custom Custom Metrics
 *
 * For streams with non-linear granulepos, you need to set a custom metric:
 *
 * - Implement an OggzMetric callback
 * - Set the OggzMetric callback using oggz_set_metric()
 *
 * \section using Seeking with OggzMetrics
 *
 * To seek, use oggz_seek_units(). Oggz will perform a ratio search
 * through the Ogg bitstream, using the OggzMetric callback to determine
 * its position relative to the desired unit.
 *
 * \note
 *
 * Many data streams begin with headers describing such things as codec
 * setup parameters. One of the assumptions Monty makes is:
 *
 * - Given pre-cached decode headers, a player may seek into a stream at
 *   any point and begin decode.
 *
 * Thus, the first action taken by applications dealing with such data is
 * to read in and cache the decode headers; thereafter the application can
 * safely seek to arbitrary points in the data.
 *
 * This impacts seeking because the portion of the bitstream containing
 * decode headers should not be considered part of the metric space. To
 * inform Oggz not to seek earlier than the end of the decode headers,
 * use oggz_set_data_start().
 *
 * \{
 */

/**
 * Retrieve the preroll of a logical bitstream.
 * \param oggz An OGGZ handle
 * \param serialno Identify the logical bitstream in \a oggz
 * \returns The preroll of the specified logical bitstream.
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 * logical bitstream in \a oggz.
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 */
int oggz_get_preroll (OGGZ * oggz, long serialno);

/**
 * Specify the preroll of a logical bitstream.
 * \param oggz An OGGZ handle
 * \param serialno Identify the logical bitstream in \a oggz to attach
 * this preroll to.
 * \param preroll The preroll
 * \returns 0 Success
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 * logical bitstream in \a oggz.
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 */
int oggz_set_preroll (OGGZ * oggz, long serialno, int preroll);

/**
 * Retrieve the granuleshift of a logical bitstream.
 * \param oggz An OGGZ handle
 * \param serialno Identify the logical bitstream in \a oggz
 * \returns The granuleshift of the specified logical bitstream.
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 * logical bitstream in \a oggz.
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 */
int oggz_get_granuleshift (OGGZ * oggz, long serialno);

/**
 * Specify the granuleshift of a logical bitstream.
 * \param oggz An OGGZ handle
 * \param serialno Identify the logical bitstream in \a oggz to attach
 * this granuleshift metric to. A value of -1 indicates that the metric should
 * be attached to all unattached logical bitstreams in \a oggz.
 * \param granuleshift The granuleshift
 * \returns 0 Success
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 * logical bitstream in \a oggz.
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 */
int oggz_set_granuleshift (OGGZ * oggz, long serialno, int granuleshift);

/**
 * Retrieve the granulerate of a logical bitstream.
 * \param oggz An OGGZ handle
 * \param serialno Identify the logical bitstream in \a oggz
 * \param granulerate_n Return location for the granulerate numerator
 * \param granulerate_d Return location for the granulerate denominator
 * \returns 0 Success
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 * logical bitstream in \a oggz.
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 *
 */
int oggz_get_granulerate (OGGZ * oggz, long serialno,
			  ogg_int64_t * granulerate_n,
			  ogg_int64_t * granulerate_d);

/**
 * Specify the granulerate of a logical bitstream.
 * \param oggz An OGGZ handle
 * \param serialno Identify the logical bitstream in \a oggz to attach
 * this linear metric to. A value of -1 indicates that the metric should
 * be attached to all unattached logical bitstreams in \a oggz.
 * \param granule_rate_numerator The numerator of the granule rate
 * \param granule_rate_denominator The denominator of the granule rate
 * \returns 0 Success
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 * logical bitstream in \a oggz.
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 */
int oggz_set_granulerate (OGGZ * oggz, long serialno,
			  ogg_int64_t granule_rate_numerator,
			  ogg_int64_t granule_rate_denominator);

/**
 * This is the signature of a function to correlate Ogg streams.
 * If every position in an Ogg stream can be described by a metric (eg. time)
 * then define this function that returns some arbitrary unit value.
 * This is the normal use of Oggz for media streams. The meaning of units is
 * arbitrary, but must be consistent across all logical bitstreams; for
 * example a conversion of the time offset of a given packet into nanoseconds
 * or a similar stream-specific subdivision may be appropriate.
 *
 * \param oggz An OGGZ handle
 * \param serialno Identifies a logical bitstream within \a oggz
 * \param granulepos A granulepos within the logical bitstream identified
 *                   by \a serialno
 * \param user_data Arbitrary data you wish to pass to your callback
 * \returns A conversion of the (serialno, granulepos) pair into a measure
 * in units which is consistent across all logical bitstreams within \a oggz
 */
typedef ogg_int64_t (*OggzMetric) (OGGZ * oggz, long serialno,
				   ogg_int64_t granulepos, void * user_data);

/**
 * Set the OggzMetric to use for an OGGZ handle
 *
 * \param oggz An OGGZ handle
 * \param serialno Identify the logical bitstream in \a oggz to attach
 *                 this metric to. A value of -1 indicates that this metric
 *                 should be attached to all unattached logical bitstreams
 *                 in \a oggz.
 * \param metric An OggzMetric callback
 * \param user_data arbitrary data to pass to the metric callback
 *
 * \returns 0 Success
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 *                               logical bitstream in \a oggz, and is not -1
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 *
 * \note Specifying values of \a serialno other than -1 allows you to pass
 *       logical bitstream specific user_data to the same metric.
 * \note Alternatively, you may use a different \a metric for each
 *       \a serialno, but all metrics used must return mutually consistent
 *       unit measurements.
 */
int oggz_set_metric (OGGZ * oggz, long serialno, OggzMetric metric,
		     void * user_data);

#ifdef _UNIMPLEMENTED
/** \defgroup order OggzOrder
 *
 * - A mechanism to aid seeking across non-metric spaces for which a partial
 *   order exists (ie. data that is not synchronised by a measure such as time,
 *   but is nevertheless somehow seekably structured), is also planned.
 *
 * \subsection OggzOrder
 *
 * Suppose there is a partial order < and a corresponding equivalence
 * relation = defined on the space of packets in the Ogg stream of 'OGGZ'.
 * An OggzOrder simply provides a comparison in terms of '<' and '=' for
 * ogg_packets against a target.
 *
 * To use OggzOrder:
 *
 * - Implement an OggzOrder callback
 * - Set the OggzOrder callback for an OGGZ handle with oggz_set_order()
 * - To seek, use oggz_seek_byorder(). Oggz will use a combination bisection
 *   search and scan of the Ogg bitstream, using the OggzOrder callback to
 *   match against the desired 'target'.
 *
 * Otherwise, for more general ogg streams for which a partial order can be
 * defined, define a function matching this specification.
 *
 * Parameters:
 *
 *     OGGZ: the OGGZ object
 *     op:  an ogg packet in the stream
 *     target: a user defined object
 *
 * Return values:
 *
 *    -1 , if 'op' would occur before the position represented by 'target'
 *     0 , if the position of 'op' is equivalent to that of 'target'
 *     1 , if 'op' would occur after the position represented by 'target'
 *     2 , if the relationship between 'op' and 'target' is undefined.
 *
 * Symbolically:
 *
 * Suppose there is a partial order < and a corresponding equivalence
 * relation = defined on the space of packets in the Ogg stream of 'OGGZ'.
 * Let p represent the position of the packet 'op', and t be the position
 * represented by 'target'.
 *
 * Then a function implementing OggzPacketOrder should return as follows:
 *
 *    -1 , p < t
 *     0 , p = t
 *     1 , t < p
 *     2 , otherwise
 *
 * Hacker's hint: if there are no circumstances in which you would return
 * a value of 2, there is a linear order; it may be possible to define a
 * Metric rather than an Order.
 *
 */
typedef int (*OggzOrder) (OGGZ * oggz, ogg_packet * op, void * target,
			 void * user_data);
/**
 * \retval 0 Success
 * \retval OGGZ_ERR_BAD_OGGZ \a oggz does not refer to an existing OGGZ
 * \retval OGGZ_ERR_INVALID Operation not suitable for this OGGZ
 * \retval OGGZ_ERR_BAD_SERIALNO \a serialno does not identify an existing
 *                               logical bitstream in \a oggz, and is not -1
 */
int oggz_set_order (OGGZ * oggz, long serialno, OggzOrder order,
		    void * user_data);

long oggz_seek_byorder (OGGZ * oggz, void * target);

#endif /* _UNIMPLEMENTED */

/**
 * Tell Oggz to remember the given offset as the start of data.
 * This informs the seeking mechanism that when seeking back to unit 0,
 * go to the given offset, not to the start of the file, which is usually
 * codec headers.
 * The usual usage is:
<pre>
    oggz_set_data_start (oggz, oggz_tell (oggz));
</pre>
 * \param oggz An OGGZ handle previously opened for reading
 * \param offset The offset of the start of data
 * \returns 0 on success, -1 on failure.
 */
int oggz_set_data_start (OGGZ * oggz, oggz_off_t offset);
/** \}
 */

/**
 * Seeks Oggz to time unit_target, but with the bounds of the offset range
 * [offset_begin, offset_end]. This is useful when seeking in network streams
 * where only parts of a media are buffered, and retrieving unbuffered
 * parts is expensive.
 * \param oggz An OGGZ handle previously opened for reading
 * \param unit_target The seek target, in milliseconds, or custom units
 * \param offset_begin Start of offset range to seek inside, in bytes
 * \param offset_end End of offset range to seek inside, in bytes,
          pass -1 for end of media
 * \returns The new position, in milliseconds or custom units
 * \retval -1 on failure (unit_target is not within range)
 */
ogg_int64_t
oggz_bounded_seek_set (OGGZ * oggz,
                       ogg_int64_t unit_target,
                       ogg_int64_t offset_begin,
                       ogg_int64_t offset_end);

/**
 * Seeks to the first key frame before unit_target, in the range
 * [offset_begin, offset_end]. serial_nos contains an array of size serial_nos
 * of serialnos of the streams which need to be seeked.
 */
ogg_int64_t
oggz_keyframe_seek_set(OGGZ * oggz,
                       long* serial_nos,
                       int num_serialno,
                       ogg_int64_t unit_target,
                       ogg_int64_t offset_begin,
                       ogg_int64_t offset_end);

#endif /* __OGGZ_SEEK_H__ */