gecko/js/tests/ecma/Expressions/11.3.1.js

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code, released
 * March 31, 1998.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

gTestfile = '11.3.1.js';

/**
   File Name:          11.3.1.js
   ECMA Section:       11.3.1 Postfix increment operator
   Description:
   The production MemberExpression : MemberExpression ++ is evaluated as
   follows:

   1.  Evaluate MemberExpression.
   2.  Call GetValue(Result(1)).
   3.  Call ToNumber(Result(2)).
   4.  Add the value 1 to Result(3), using the same rules as for the +
   operator (section 0).
   5.  Call PutValue(Result(1), Result(4)).
   6.  Return Result(3).

   Author:             christine@netscape.com
   Date:               12 november 1997
*/
var SECTION = "11.3.1";
var VERSION = "ECMA_1";
startTest();

writeHeaderToLog( SECTION + " Postfix increment operator");

// special numbers
new TestCase( SECTION,  "var MYVAR; MYVAR++",                       NaN,                            eval("var MYVAR; MYVAR++") );
new TestCase( SECTION,  "var MYVAR= void 0; MYVAR++",               NaN,                            eval("var MYVAR=void 0; MYVAR++") );
new TestCase( SECTION,  "var MYVAR=null; MYVAR++",                  0,                            eval("var MYVAR=null; MYVAR++") );
new TestCase( SECTION,  "var MYVAR=true; MYVAR++",                  1,                            eval("var MYVAR=true; MYVAR++") );
new TestCase( SECTION,  "var MYVAR=false; MYVAR++",                 0,                            eval("var MYVAR=false; MYVAR++") );

// verify return value

new TestCase( SECTION,    "var MYVAR=Number.POSITIVE_INFINITY;MYVAR++", Number.POSITIVE_INFINITY,   eval("var MYVAR=Number.POSITIVE_INFINITY;MYVAR++") );
new TestCase( SECTION,    "var MYVAR=Number.NEGATIVE_INFINITY;MYVAR++", Number.NEGATIVE_INFINITY,   eval("var MYVAR=Number.NEGATIVE_INFINITY;MYVAR++") );
new TestCase( SECTION,    "var MYVAR=Number.NaN;MYVAR++",               Number.NaN,                 eval("var MYVAR=Number.NaN;MYVAR++") );

// verify value of variable

new TestCase( SECTION,    "var MYVAR=Number.POSITIVE_INFINITY;MYVAR++;MYVAR", Number.POSITIVE_INFINITY,   eval("var MYVAR=Number.POSITIVE_INFINITY;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=Number.NEGATIVE_INFINITY;MYVAR++;MYVAR", Number.NEGATIVE_INFINITY,   eval("var MYVAR=Number.NEGATIVE_INFINITY;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=Number.NaN;MYVAR++;MYVAR",               Number.NaN,                 eval("var MYVAR=Number.NaN;MYVAR++;MYVAR") );

// number primitives
new TestCase( SECTION,    "var MYVAR=0;MYVAR++",            0,          eval("var MYVAR=0;MYVAR++") );
new TestCase( SECTION,    "var MYVAR=0.2345;MYVAR++",       0.2345,     eval("var MYVAR=0.2345;MYVAR++") );
new TestCase( SECTION,    "var MYVAR=-0.2345;MYVAR++",      -0.2345,     eval("var MYVAR=-0.2345;MYVAR++") );

// verify value of variable

new TestCase( SECTION,    "var MYVAR=0;MYVAR++;MYVAR",      1,          eval("var MYVAR=0;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=0.2345;MYVAR++;MYVAR", 1.2345,     eval("var MYVAR=0.2345;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=-0.2345;MYVAR++;MYVAR", 0.7655,   eval("var MYVAR=-0.2345;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=0;MYVAR++;MYVAR",      1,   eval("var MYVAR=0;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=0;MYVAR++;MYVAR",      1,   eval("var MYVAR=0;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=0;MYVAR++;MYVAR",      1,   eval("var MYVAR=0;MYVAR++;MYVAR") );

// boolean values
// verify return value

new TestCase( SECTION,    "var MYVAR=true;MYVAR++",         1,       eval("var MYVAR=true;MYVAR++") );
new TestCase( SECTION,    "var MYVAR=false;MYVAR++",        0,      eval("var MYVAR=false;MYVAR++") );
// verify value of variable

new TestCase( SECTION,    "var MYVAR=true;MYVAR++;MYVAR",   2,   eval("var MYVAR=true;MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=false;MYVAR++;MYVAR",  1,   eval("var MYVAR=false;MYVAR++;MYVAR") );

// boolean objects
// verify return value

new TestCase( SECTION,    "var MYVAR=new Boolean(true);MYVAR++",         1,     eval("var MYVAR=true;MYVAR++") );
new TestCase( SECTION,    "var MYVAR=new Boolean(false);MYVAR++",        0,     eval("var MYVAR=false;MYVAR++") );
// verify value of variable

new TestCase( SECTION,    "var MYVAR=new Boolean(true);MYVAR++;MYVAR",   2,     eval("var MYVAR=new Boolean(true);MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=new Boolean(false);MYVAR++;MYVAR",  1,     eval("var MYVAR=new Boolean(false);MYVAR++;MYVAR") );

// string primitives
new TestCase( SECTION,    "var MYVAR='string';MYVAR++",         Number.NaN,     eval("var MYVAR='string';MYVAR++") );
new TestCase( SECTION,    "var MYVAR='12345';MYVAR++",          12345,          eval("var MYVAR='12345';MYVAR++") );
new TestCase( SECTION,    "var MYVAR='-12345';MYVAR++",         -12345,         eval("var MYVAR='-12345';MYVAR++") );
new TestCase( SECTION,    "var MYVAR='0Xf';MYVAR++",            15,             eval("var MYVAR='0Xf';MYVAR++") );
new TestCase( SECTION,    "var MYVAR='077';MYVAR++",            77,             eval("var MYVAR='077';MYVAR++") );
new TestCase( SECTION,    "var MYVAR=''; MYVAR++",              0,              eval("var MYVAR='';MYVAR++") );

// verify value of variable

new TestCase( SECTION,    "var MYVAR='string';MYVAR++;MYVAR",   Number.NaN,     eval("var MYVAR='string';MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR='12345';MYVAR++;MYVAR",    12346,          eval("var MYVAR='12345';MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR='-12345';MYVAR++;MYVAR",   -12344,          eval("var MYVAR='-12345';MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR='0xf';MYVAR++;MYVAR",      16,             eval("var MYVAR='0xf';MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR='077';MYVAR++;MYVAR",      78,             eval("var MYVAR='077';MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR='';MYVAR++;MYVAR",         1,              eval("var MYVAR='';MYVAR++;MYVAR") );

// string objects
new TestCase( SECTION,    "var MYVAR=new String('string');MYVAR++",         Number.NaN,     eval("var MYVAR=new String('string');MYVAR++") );
new TestCase( SECTION,    "var MYVAR=new String('12345');MYVAR++",          12345,          eval("var MYVAR=new String('12345');MYVAR++") );
new TestCase( SECTION,    "var MYVAR=new String('-12345');MYVAR++",         -12345,         eval("var MYVAR=new String('-12345');MYVAR++") );
new TestCase( SECTION,    "var MYVAR=new String('0Xf');MYVAR++",            15,             eval("var MYVAR=new String('0Xf');MYVAR++") );
new TestCase( SECTION,    "var MYVAR=new String('077');MYVAR++",            77,             eval("var MYVAR=new String('077');MYVAR++") );
new TestCase( SECTION,    "var MYVAR=new String(''); MYVAR++",              0,              eval("var MYVAR=new String('');MYVAR++") );

// verify value of variable

new TestCase( SECTION,    "var MYVAR=new String('string');MYVAR++;MYVAR",   Number.NaN,     eval("var MYVAR=new String('string');MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=new String('12345');MYVAR++;MYVAR",    12346,          eval("var MYVAR=new String('12345');MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=new String('-12345');MYVAR++;MYVAR",   -12344,          eval("var MYVAR=new String('-12345');MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=new String('0xf');MYVAR++;MYVAR",      16,             eval("var MYVAR=new String('0xf');MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=new String('077');MYVAR++;MYVAR",      78,             eval("var MYVAR=new String('077');MYVAR++;MYVAR") );
new TestCase( SECTION,    "var MYVAR=new String('');MYVAR++;MYVAR",         1,              eval("var MYVAR=new String('');MYVAR++;MYVAR") );

test();