gecko/gfx/thebes/public/gfxRect.h

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 4 -*-
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Oracle Corporation code.
 *
 * The Initial Developer of the Original Code is Oracle Corporation.
 * Portions created by the Initial Developer are Copyright (C) 2005
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Stuart Parmenter <pavlov@pavlov.net>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#ifndef GFX_RECT_H
#define GFX_RECT_H

#include "gfxTypes.h"
#include "gfxPoint.h"

struct THEBES_API gfxCorner {
    typedef int Corner;
    enum {
        // this order is important!
        TOP_LEFT = 0,
        TOP_RIGHT = 1,
        BOTTOM_RIGHT = 2,
        BOTTOM_LEFT = 3,
        NUM_CORNERS = 4
    };
};


struct THEBES_API gfxRect {
    // pt? point?
    gfxPoint pos;
    gfxSize size;

    gfxRect() {}
    gfxRect(const gfxRect& s) : pos(s.pos), size(s.size) {}
    gfxRect(const gfxPoint& _pos, const gfxSize& _size) : pos(_pos), size(_size) {}
    gfxRect(gfxFloat _x, gfxFloat _y, gfxFloat _width, gfxFloat _height) :
        pos(_x, _y), size(_width, _height) {}

    int operator==(const gfxRect& s) const {
        return (pos == s.pos) && (size == s.size);
    }
    int operator!=(const gfxRect& s) const {
        return (pos != s.pos) || (size != s.size);
    }

    const gfxRect& MoveBy(const gfxPoint& aPt) {
        pos = pos + aPt;
        return *this;
    }
    gfxRect operator+(const gfxPoint& aPt) const {
        return gfxRect(pos + aPt, size);
    }
    gfxRect operator-(const gfxPoint& aPt) const {
        return gfxRect(pos - aPt, size);
    }

    gfxFloat Width() const { return size.width; }
    gfxFloat Height() const { return size.height; }
    gfxFloat X() const { return pos.x; }
    gfxFloat Y() const { return pos.y; }
    gfxFloat XMost() const { return pos.x + size.width; }
    gfxFloat YMost() const { return pos.y + size.height; }

    PRBool IsEmpty() const { return size.width <= 0 || size.height <= 0; }
    gfxRect Intersect(const gfxRect& aRect) const;
    gfxRect Union(const gfxRect& aRect) const;
    PRBool Contains(const gfxRect& aRect) const;
    PRBool Contains(const gfxPoint& aPoint) const;
    // XXX figure out what methods (intersect, union, etc) we use and add them.

    gfxPoint TopLeft() { return pos; }
    gfxPoint BottomRight() { return gfxPoint(XMost(), YMost()); }

    void Inset(gfxFloat k) {
        pos.x += k;
        pos.y += k;
        size.width = PR_MAX(0.0, size.width - k * 2.0);
        size.height = PR_MAX(0.0, size.height - k * 2.0);
    }

    void Inset(gfxFloat top, gfxFloat right, gfxFloat bottom, gfxFloat left) {
        pos.x += left;
        pos.y += top;
        size.width = PR_MAX(0.0, size.width - (right+left));
        size.height = PR_MAX(0.0, size.height - (bottom+top));
    }

    void Inset(const gfxFloat *sides) {
        Inset(sides[0], sides[1], sides[2], sides[3]);
    }

    void Outset(gfxFloat k) {
        pos.x -= k;
        pos.y -= k;
        size.width = PR_MAX(0.0, size.width + k * 2.0);
        size.height = PR_MAX(0.0, size.height + k * 2.0);
    }

    void Outset(gfxFloat top, gfxFloat right, gfxFloat bottom, gfxFloat left) {
        pos.x -= left;
        pos.y -= top;
        size.width = PR_MAX(0.0, size.width + (right+left));
        size.height = PR_MAX(0.0, size.height + (bottom+top));
    }

    void Outset(const gfxFloat *sides) {
        Outset(sides[0], sides[1], sides[2], sides[3]);
    }

    // Round the rectangle edges to integer coordinates, such that the rounded
    // rectangle has the same set of pixel centers as the original rectangle.
    // Edges at offset 0.5 round up.
    // Suitable for most places where integral device coordinates
    // are needed, but note that any translation should be applied first to
    // avoid pixel rounding errors.
    // Note that this is *not* rounding to nearest integer if the values are negative.
    // They are always rounding as floor(n + 0.5).
    // See https://bugzilla.mozilla.org/show_bug.cgi?id=410748#c14
    // If you need similar method which is using NS_round(), you should create
    // new |RoundAwayFromZero()| method.
    void Round();
    
    // Snap the rectangle edges to integer coordinates, such that the
    // resulting rectangle contains the original rectangle.
    void RoundOut();

    // grabbing specific points
    gfxPoint TopLeft() const { return gfxPoint(pos); }
    gfxPoint TopRight() const { return pos + gfxSize(size.width, 0.0); }
    gfxPoint BottomLeft() const { return pos + gfxSize(0.0, size.height); }
    gfxPoint BottomRight() const { return pos + size; }

    gfxPoint Corner(gfxCorner::Corner corner) const {
        switch (corner) {
            case gfxCorner::TOP_LEFT: return TopLeft();
            case gfxCorner::TOP_RIGHT: return TopRight();
            case gfxCorner::BOTTOM_LEFT: return BottomLeft();
            case gfxCorner::BOTTOM_RIGHT: return BottomRight();
            default:
                NS_ERROR("Invalid corner!");
                break;
        }
        return gfxPoint(0.0, 0.0);
    }

    /* Conditions this border to Cairo's max coordinate space.
     * The caller can check IsEmpty() after Condition() -- if it's TRUE,
     * the caller can possibly avoid doing any extra rendering.
     */
    void Condition();

    void Scale(gfxFloat k) {
        NS_ASSERTION(k >= 0.0, "Invalid (negative) scale factor");
        pos.x *= k;
        pos.y *= k;
        size.width *= k;
        size.height *= k;
    }
    
    void Scale(gfxFloat sx, gfxFloat sy) {
        NS_ASSERTION(sx >= 0.0, "Invalid (negative) scale factor");
        NS_ASSERTION(sy >= 0.0, "Invalid (negative) scale factor");
        pos.x *= sx;
        pos.y *= sy;
        size.width *= sx;
        size.height *= sy;
    }

    void ScaleInverse(gfxFloat k) {
        NS_ASSERTION(k > 0.0, "Invalid (negative) scale factor");
        pos.x /= k;
        pos.y /= k;
        size.width /= k;
        size.height /= k;
    }
};

struct THEBES_API gfxCornerSizes {
    gfxSize sizes[gfxCorner::NUM_CORNERS];

    gfxCornerSizes () { }

    gfxCornerSizes (gfxFloat v) {
        for (int i = 0; i < gfxCorner::NUM_CORNERS; i++)
            sizes[i].SizeTo(v, v);
    }

    gfxCornerSizes (gfxFloat tl, gfxFloat tr, gfxFloat br, gfxFloat bl) {
        sizes[gfxCorner::TOP_LEFT].SizeTo(tl, tl);
        sizes[gfxCorner::TOP_RIGHT].SizeTo(tr, tr);
        sizes[gfxCorner::BOTTOM_RIGHT].SizeTo(br, br);
        sizes[gfxCorner::BOTTOM_LEFT].SizeTo(bl, bl);
    }

    gfxCornerSizes (const gfxSize& tl, const gfxSize& tr, const gfxSize& br, const gfxSize& bl) {
        sizes[gfxCorner::TOP_LEFT] = tl;
        sizes[gfxCorner::TOP_RIGHT] = tr;
        sizes[gfxCorner::BOTTOM_RIGHT] = br;
        sizes[gfxCorner::BOTTOM_LEFT] = bl;
    }

    const gfxSize& operator[] (gfxCorner::Corner index) const {
        return sizes[index];
    }

    gfxSize& operator[] (gfxCorner::Corner index) {
        return sizes[index];
    }

    const gfxSize TopLeft() const { return sizes[gfxCorner::TOP_LEFT]; }
    gfxSize& TopLeft() { return sizes[gfxCorner::TOP_LEFT]; }

    const gfxSize TopRight() const { return sizes[gfxCorner::TOP_RIGHT]; }
    gfxSize& TopRight() { return sizes[gfxCorner::TOP_RIGHT]; }

    const gfxSize BottomLeft() const { return sizes[gfxCorner::BOTTOM_LEFT]; }
    gfxSize& BottomLeft() { return sizes[gfxCorner::BOTTOM_LEFT]; }

    const gfxSize BottomRight() const { return sizes[gfxCorner::BOTTOM_RIGHT]; }
    gfxSize& BottomRight() { return sizes[gfxCorner::BOTTOM_RIGHT]; }
};
#endif /* GFX_RECT_H */