gecko/security/nss/tests/cert/cert.sh

1431 lines
50 KiB
Bash
Raw Normal View History

2008-06-06 05:40:11 -07:00
#! /bin/sh
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1994-2000
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories
# Slavomir Katuscak <slavomir.katuscak@sun.com>, Sun Microsystems
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
########################################################################
#
# mozilla/security/nss/tests/cert/rcert.sh
#
# Certificate generating and handeling for NSS QA, can be included
# multiple times from all.sh and the individual scripts
#
# needs to work on all Unix and Windows platforms
#
# included from (don't expect this to be up to date)
# --------------------------------------------------
# all.sh
# ssl.sh
# smime.sh
# tools.sh
#
# special strings
# ---------------
# FIXME ... known problems, search for this string
# NOTE .... unexpected behavior
#
# FIXME - Netscape - NSS
########################################################################
############################## cert_init ###############################
# local shell function to initialize this script
########################################################################
cert_init()
{
SCRIPTNAME="cert.sh"
if [ -z "${CLEANUP}" ] ; then # if nobody else is responsible for
CLEANUP="${SCRIPTNAME}" # cleaning this script will do it
fi
if [ -z "${INIT_SOURCED}" ] ; then
cd ../common
. ./init.sh
fi
if [ -z "${IOPR_CERT_SOURCED}" ]; then
. ../iopr/cert_iopr.sh
fi
SCRIPTNAME="cert.sh"
CRL_GRP_DATE=`date -u "+%Y%m%d%H%M%SZ"`
if [ -n "$NSS_ENABLE_ECC" ] ; then
html_head "Certutil and Crlutil Tests with ECC"
else
html_head "Certutil and Crlutil Tests"
fi
LIBDIR="${DIST}/${OBJDIR}/lib"
ROOTCERTSFILE=`ls -1 ${LIBDIR}/*nssckbi* | head -1`
if [ ! "${ROOTCERTSFILE}" ] ; then
html_failed "Looking for root certs module."
cert_log "ERROR: Root certs module not found."
Exit 5 "Fatal - Root certs module not found."
else
html_passed "Looking for root certs module."
fi
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
ROOTCERTSFILE=`cygpath -m ${ROOTCERTSFILE}`
fi
}
cert_log() ###################### write the cert_status file
{
echo "$SCRIPTNAME $*"
echo $* >>${CERT_LOG_FILE}
}
################################ certu #################################
# local shell function to call certutil, also: writes action and options to
# stdout, sets variable RET and writes results to the html file results
########################################################################
certu()
{
echo "$SCRIPTNAME: ${CU_ACTION} --------------------------"
if [ -n "${CU_SUBJECT}" ]; then
#the subject of the cert contains blanks, and the shell
#will strip the quotes off the string, if called otherwise...
echo "certutil -s \"${CU_SUBJECT}\" $*"
${PROFTOOL} ${BINDIR}/certutil -s "${CU_SUBJECT}" $*
RET=$?
CU_SUBJECT=""
else
echo "certutil $*"
${PROFTOOL} ${BINDIR}/certutil $*
RET=$?
fi
if [ "$RET" -ne 0 ]; then
CERTFAILED=$RET
html_failed "${CU_ACTION} ($RET) "
cert_log "ERROR: ${CU_ACTION} failed $RET"
else
html_passed "${CU_ACTION}"
fi
return $RET
}
################################ crlu #################################
# local shell function to call crlutil, also: writes action and options to
# stdout, sets variable RET and writes results to the html file results
########################################################################
crlu()
{
echo "$SCRIPTNAME: ${CU_ACTION} --------------------------"
CRLUTIL="crlutil -q"
echo "$CRLUTIL $*"
${PROFTOOL} ${BINDIR}/$CRLUTIL $*
RET=$?
if [ "$RET" -ne 0 ]; then
CRLFAILED=$RET
html_failed "${CU_ACTION} ($RET) "
cert_log "ERROR: ${CU_ACTION} failed $RET"
else
html_passed "${CU_ACTION}"
fi
return $RET
}
modu()
{
echo "$SCRIPTNAME: ${CU_ACTION} --------------------------"
MODUTIL="modutil"
echo "$MODUTIL $*"
# echo is used to press Enter expected by modutil
echo | ${BINDIR}/$MODUTIL $*
RET=$?
if [ "$RET" -ne 0 ]; then
MODFAILED=$RET
html_failed "${CU_ACTION} ($RET) "
cert_log "ERROR: ${CU_ACTION} failed $RET"
else
html_passed "${CU_ACTION}"
fi
return $RET
}
############################# cert_init_cert ##########################
# local shell function to initialize creation of client and server certs
########################################################################
cert_init_cert()
{
CERTDIR="$1"
CERTNAME="$2"
CERTSERIAL="$3"
DOMAIN="$4"
if [ ! -d "${CERTDIR}" ]; then
mkdir -p "${CERTDIR}"
else
echo "$SCRIPTNAME: WARNING - ${CERTDIR} exists"
fi
cd "${CERTDIR}"
CERTDIR="."
PROFILEDIR=`cd ${CERTDIR}; pwd`
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
PROFILEDIR=`cygpath -m ${PROFILEDIR}`
fi
if [ -n "${MULTIACCESS_DBM}" ]; then
PROFILEDIR="multiaccess:${DOMAIN}"
fi
noise
}
############################# hw_acc #################################
# local shell function to add hw accelerator modules to the db
########################################################################
hw_acc()
{
HW_ACC_RET=0
HW_ACC_ERR=""
if [ -n "$O_HWACC" -a "$O_HWACC" = ON -a -z "$USE_64" ] ; then
echo "creating $CERTNAME s cert with hwaccelerator..."
#case $ACCELERATOR in
#rainbow)
echo "modutil -add rainbow -libfile /usr/lib/libcryptoki22.so "
echo " -dbdir ${PROFILEDIR} 2>&1 "
echo | ${BINDIR}/modutil -add rainbow -libfile /usr/lib/libcryptoki22.so \
-dbdir ${PROFILEDIR} 2>&1
if [ "$?" -ne 0 ]; then
echo "modutil -add rainbow failed in `pwd`"
HW_ACC_RET=1
HW_ACC_ERR="modutil -add rainbow"
fi
echo "modutil -add ncipher "
echo " -libfile /opt/nfast/toolkits/pkcs11/libcknfast.so "
echo " -dbdir ${PROFILEDIR} 2>&1 "
echo | ${BINDIR}/modutil -add ncipher \
-libfile /opt/nfast/toolkits/pkcs11/libcknfast.so \
-dbdir ${PROFILEDIR} 2>&1
if [ "$?" -ne 0 ]; then
echo "modutil -add ncipher failed in `pwd`"
HW_ACC_RET=`expr $HW_ACC_RET + 2`
HW_ACC_ERR="$HW_ACC_ERR,modutil -add ncipher"
fi
if [ "$HW_ACC_RET" -ne 0 ]; then
html_failed "Adding HW accelerators to certDB for ${CERTNAME} ($HW_ACC_RET) "
else
html_passed "Adding HW accelerators to certDB for ${CERTNAME}"
fi
fi
return $HW_ACC_RET
}
############################# cert_create_cert #########################
# local shell function to create client certs
# initialize DB, import
# root cert
# add cert to DB
########################################################################
cert_create_cert()
{
cert_init_cert "$1" "$2" "$3" "$4"
CU_ACTION="Initializing ${CERTNAME}'s Cert DB"
certu -N -d "${PROFILEDIR}" -f "${R_PWFILE}" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Loading root cert module to ${CERTNAME}'s Cert DB"
modu -add "RootCerts" -libfile "${ROOTCERTSFILE}" -dbdir "${PROFILEDIR}" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
hw_acc
CU_ACTION="Import Root CA for $CERTNAME"
certu -A -n "TestCA" -t "TC,TC,TC" -f "${R_PWFILE}" -d "${PROFILEDIR}" \
-i "${R_CADIR}/root.cert" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Import EC Root CA for $CERTNAME"
certu -A -n "TestCA-ec" -t "TC,TC,TC" -f "${R_PWFILE}" \
-d "${PROFILEDIR}" -i "${R_CADIR}/ecroot.cert" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
fi
cert_add_cert "$5"
return $?
}
############################# cert_add_cert ############################
# local shell function to add client certs to an existing CERT DB
# generate request
# sign request
# import Cert
#
########################################################################
cert_add_cert()
{
CU_ACTION="Generate Cert Request for $CERTNAME"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -d "${PROFILEDIR}" -f "${R_PWFILE}" -z "${R_NOISE_FILE}" -o req 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Sign ${CERTNAME}'s Request"
certu -C -c "TestCA" -m "$CERTSERIAL" -v 60 -d "${P_R_CADIR}" \
-i req -o "${CERTNAME}.cert" -f "${R_PWFILE}" "$1" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Import $CERTNAME's Cert"
certu -A -n "$CERTNAME" -t "u,u,u" -d "${PROFILEDIR}" -f "${R_PWFILE}" \
-i "${CERTNAME}.cert" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
cert_log "SUCCESS: $CERTNAME's Cert Created"
#
# Generate and add EC cert
#
if [ -n "$NSS_ENABLE_ECC" ] ; then
CURVE="secp384r1"
CU_ACTION="Generate EC Cert Request for $CERTNAME"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}-ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -k ec -q "${CURVE}" -d "${PROFILEDIR}" -f "${R_PWFILE}" \
-z "${R_NOISE_FILE}" -o req 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Sign ${CERTNAME}'s EC Request"
certu -C -c "TestCA-ec" -m "$CERTSERIAL" -v 60 -d "${P_R_CADIR}" \
-i req -o "${CERTNAME}-ec.cert" -f "${R_PWFILE}" "$1" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Import $CERTNAME's EC Cert"
certu -A -n "${CERTNAME}-ec" -t "u,u,u" -d "${PROFILEDIR}" \
-f "${R_PWFILE}" -i "${CERTNAME}-ec.cert" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
cert_log "SUCCESS: $CERTNAME's EC Cert Created"
# Generate EC certificate signed with RSA
CU_ACTION="Generate mixed EC Cert Request for $CERTNAME"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}-ecmixed@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -k ec -q "${CURVE}" -d "${PROFILEDIR}" -f "${R_PWFILE}" \
-z "${R_NOISE_FILE}" -o req 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Sign ${CERTNAME}'s EC Request with RSA"
# Avoid conflicting serial numbers with TestCA issuer by keeping
# this set far away. A smaller number risks colliding with the
# extended ssl user certificates.
NEWSERIAL=`expr ${CERTSERIAL} + 10000`
certu -C -c "TestCA" -m "$NEWSERIAL" -v 60 -d "${P_R_CADIR}" \
-i req -o "${CERTNAME}-ecmixed.cert" -f "${R_PWFILE}" "$1" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
CU_ACTION="Import $CERTNAME's mixed EC Cert"
certu -A -n "${CERTNAME}-ecmixed" -t "u,u,u" -d "${PROFILEDIR}" \
-f "${R_PWFILE}" -i "${CERTNAME}-ecmixed.cert" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
cert_log "SUCCESS: $CERTNAME's mixed EC Cert Created"
fi
return 0
}
################################# cert_all_CA ################################
# local shell function to build the additional Temp. Certificate Authority (CA)
# used for the "real life" ssl test with 2 different CA's in the
# client and in teh server's dir
##########################################################################
cert_all_CA()
{
echo nss > ${PWFILE}
ALL_CU_SUBJECT="CN=NSS Test CA, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
cert_CA $CADIR TestCA -x "CTu,CTu,CTu" ${D_CA} "1"
ALL_CU_SUBJECT="CN=NSS Server Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $SERVER_CADIR serverCA -x "Cu,Cu,Cu" ${D_SERVER_CA} "2"
ALL_CU_SUBJECT="CN=NSS Chain1 Server Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $SERVER_CADIR chain-1-serverCA "-c serverCA" "u,u,u" ${D_SERVER_CA} "3"
ALL_CU_SUBJECT="CN=NSS Chain2 Server Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $SERVER_CADIR chain-2-serverCA "-c chain-1-serverCA" "u,u,u" ${D_SERVER_CA} "4"
ALL_CU_SUBJECT="CN=NSS Client Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $CLIENT_CADIR clientCA -x "Tu,Cu,Cu" ${D_CLIENT_CA} "5"
ALL_CU_SUBJECT="CN=NSS Chain1 Client Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $CLIENT_CADIR chain-1-clientCA "-c clientCA" "u,u,u" ${D_CLIENT_CA} "6"
ALL_CU_SUBJECT="CN=NSS Chain2 Client Test CA, O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_CA $CLIENT_CADIR chain-2-clientCA "-c chain-1-clientCA" "u,u,u" ${D_CLIENT_CA} "7"
rm $CLIENT_CADIR/root.cert $SERVER_CADIR/root.cert
# root.cert in $CLIENT_CADIR and in $SERVER_CADIR is one of the last
# in the chain
if [ -n "$NSS_ENABLE_ECC" ] ; then
#
# Create EC version of TestCA
CA_CURVE="secp521r1"
ALL_CU_SUBJECT="CN=NSS Test CA (ECC), O=BOGUS NSS, L=Mountain View, ST=California, C=US"
cert_ec_CA $CADIR TestCA-ec -x "CTu,CTu,CTu" ${D_CA} "1" ${CA_CURVE}
#
# Create EC versions of the intermediate CA certs
ALL_CU_SUBJECT="CN=NSS Server Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $SERVER_CADIR serverCA-ec -x "Cu,Cu,Cu" ${D_SERVER_CA} "2" ${CA_CURVE}
ALL_CU_SUBJECT="CN=NSS Chain1 Server Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $SERVER_CADIR chain-1-serverCA-ec "-c serverCA-ec" "u,u,u" ${D_SERVER_CA} "3" ${CA_CURVE}
ALL_CU_SUBJECT="CN=NSS Chain2 Server Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $SERVER_CADIR chain-2-serverCA-ec "-c chain-1-serverCA-ec" "u,u,u" ${D_SERVER_CA} "4" ${CA_CURVE}
ALL_CU_SUBJECT="CN=NSS Client Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $CLIENT_CADIR clientCA-ec -x "Tu,Cu,Cu" ${D_CLIENT_CA} "5" ${CA_CURVE}
ALL_CU_SUBJECT="CN=NSS Chain1 Client Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $CLIENT_CADIR chain-1-clientCA-ec "-c clientCA-ec" "u,u,u" ${D_CLIENT_CA} "6" ${CA_CURVE}
ALL_CU_SUBJECT="CN=NSS Chain2 Client Test CA (ECC), O=BOGUS NSS, L=Santa Clara, ST=California, C=US"
cert_ec_CA $CLIENT_CADIR chain-2-clientCA-ec "-c chain-1-clientCA-ec" "u,u,u" ${D_CLIENT_CA} "7" ${CA_CURVE}
rm $CLIENT_CADIR/ecroot.cert $SERVER_CADIR/ecroot.cert
# ecroot.cert in $CLIENT_CADIR and in $SERVER_CADIR is one of the last
# in the chain
fi
}
################################# cert_CA ################################
# local shell function to build the Temp. Certificate Authority (CA)
# used for testing purposes, creating a CA Certificate and a root cert
##########################################################################
cert_CA()
{
CUR_CADIR=$1
NICKNAME=$2
SIGNER=$3
TRUSTARG=$4
DOMAIN=$5
CERTSERIAL=$6
echo "$SCRIPTNAME: Creating a CA Certificate $NICKNAME =========================="
if [ ! -d "${CUR_CADIR}" ]; then
mkdir -p "${CUR_CADIR}"
fi
cd ${CUR_CADIR}
pwd
LPROFILE=`pwd`
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
LPROFILE=`cygpath -m ${LPROFILE}`
fi
if [ -n "${MULTIACCESS_DBM}" ]; then
LPROFILE="multiaccess:${DOMAIN}"
fi
if [ "$SIGNER" = "-x" ] ; then # self signed -> create DB
CU_ACTION="Creating CA Cert DB"
certu -N -d "${LPROFILE}" -f ${R_PWFILE} 2>&1
if [ "$RET" -ne 0 ]; then
Exit 5 "Fatal - failed to create CA $NICKNAME "
fi
CU_ACTION="Loading root cert module to CA Cert DB"
modu -add "RootCerts" -libfile "${ROOTCERTSFILE}" -dbdir "${LPROFILE}" 2>&1
if [ "$RET" -ne 0 ]; then
return $RET
fi
echo "$SCRIPTNAME: Certificate initialized ----------"
fi
################# Creating CA Cert ######################################
#
CU_ACTION="Creating CA Cert $NICKNAME "
CU_SUBJECT=$ALL_CU_SUBJECT
certu -S -n $NICKNAME -t $TRUSTARG -v 600 $SIGNER -d ${LPROFILE} -1 -2 -5 \
-f ${R_PWFILE} -z ${R_NOISE_FILE} -m $CERTSERIAL 2>&1 <<CERTSCRIPT
5
6
9
n
y
-1
n
5
6
7
9
n
CERTSCRIPT
if [ "$RET" -ne 0 ]; then
echo "return value is $RET"
Exit 6 "Fatal - failed to create CA cert"
fi
################# Exporting Root Cert ###################################
#
CU_ACTION="Exporting Root Cert"
certu -L -n $NICKNAME -r -d ${LPROFILE} -o root.cert
if [ "$RET" -ne 0 ]; then
Exit 7 "Fatal - failed to export root cert"
fi
cp root.cert ${NICKNAME}.ca.cert
}
################################ cert_ec_CA ##############################
# local shell function to build the Temp. Certificate Authority (CA)
# used for testing purposes, creating a CA Certificate and a root cert
# This is the ECC version of cert_CA.
##########################################################################
cert_ec_CA()
{
CUR_CADIR=$1
NICKNAME=$2
SIGNER=$3
TRUSTARG=$4
DOMAIN=$5
CERTSERIAL=$6
CURVE=$7
echo "$SCRIPTNAME: Creating an EC CA Certificate $NICKNAME =========================="
if [ ! -d "${CUR_CADIR}" ]; then
mkdir -p "${CUR_CADIR}"
fi
cd ${CUR_CADIR}
pwd
LPROFILE=.
if [ -n "${MULTIACCESS_DBM}" ]; then
LPROFILE="multiaccess:${DOMAIN}"
fi
################# Creating an EC CA Cert ################################
#
CU_ACTION="Creating EC CA Cert $NICKNAME "
CU_SUBJECT=$ALL_CU_SUBJECT
certu -S -n $NICKNAME -k ec -q $CURVE -t $TRUSTARG -v 600 $SIGNER \
-d ${LPROFILE} -1 -2 -5 -f ${R_PWFILE} -z ${R_NOISE_FILE} \
-m $CERTSERIAL 2>&1 <<CERTSCRIPT
5
6
9
n
y
-1
n
5
6
7
9
n
CERTSCRIPT
if [ "$RET" -ne 0 ]; then
echo "return value is $RET"
Exit 6 "Fatal - failed to create EC CA cert"
fi
################# Exporting EC Root Cert ################################
#
CU_ACTION="Exporting EC Root Cert"
certu -L -n $NICKNAME -r -d ${LPROFILE} -o ecroot.cert
if [ "$RET" -ne 0 ]; then
Exit 7 "Fatal - failed to export ec root cert"
fi
cp ecroot.cert ${NICKNAME}.ca.cert
}
############################## cert_smime_client #############################
# local shell function to create client Certificates for S/MIME tests
##############################################################################
cert_smime_client()
{
CERTFAILED=0
echo "$SCRIPTNAME: Creating Client CA Issued Certificates =============="
cert_create_cert ${ALICEDIR} "Alice" 30 ${D_ALICE}
cert_create_cert ${BOBDIR} "Bob" 40 ${D_BOB}
echo "$SCRIPTNAME: Creating Dave's Certificate -------------------------"
cert_create_cert "${DAVEDIR}" Dave 50 ${D_DAVE}
## XXX With this new script merging ECC and non-ECC tests, the
## call to cert_create_cert ends up creating two separate certs
## one for Eve and another for Eve-ec but they both end up with
## the same Subject Alt Name Extension, i.e., both the cert for
## Eve@bogus.com and the cert for Eve-ec@bogus.com end up
## listing eve@bogus.net in the Certificate Subject Alt Name extension.
## This can cause a problem later when cmsutil attempts to create
## enveloped data and accidently picks up the ECC cert (NSS currently
## does not support ECC for enveloped data creation). This script
## avoids the problem by ensuring that these conflicting certs are
## never added to the same cert database (see comment marked XXXX).
echo "$SCRIPTNAME: Creating multiEmail's Certificate --------------------"
cert_create_cert "${EVEDIR}" "Eve" 60 ${D_EVE} "-7 eve@bogus.net,eve@bogus.cc,beve@bogus.com"
#echo "************* Copying CA files to ${SERVERDIR}"
#cp ${CADIR}/*.db .
#hw_acc
#########################################################################
#
#cd ${CERTDIR}
#CU_ACTION="Creating ${CERTNAME}'s Server Cert"
#CU_SUBJECT="CN=${CERTNAME}, E=${CERTNAME}@bogus.com, O=BOGUS Netscape, L=Mountain View, ST=California, C=US"
#certu -S -n "${CERTNAME}" -c "TestCA" -t "u,u,u" -m "$CERTSERIAL" \
# -d ${PROFILEDIR} -f "${R_PWFILE}" -z "${R_NOISE_FILE}" -v 60 2>&1
#CU_ACTION="Export Dave's Cert"
#cd ${DAVEDIR}
#certu -L -n "Dave" -r -d ${P_R_DAVE} -o Dave.cert
################# Importing Certificates for S/MIME tests ###############
#
echo "$SCRIPTNAME: Importing Certificates =============================="
CU_ACTION="Import Bob's cert into Alice's db"
certu -E -t "p,p,p" -d ${P_R_ALICEDIR} -f ${R_PWFILE} \
-i ${R_BOBDIR}/Bob.cert 2>&1
CU_ACTION="Import Dave's cert into Alice's DB"
certu -E -t "p,p,p" -d ${P_R_ALICEDIR} -f ${R_PWFILE} \
-i ${R_DAVEDIR}/Dave.cert 2>&1
CU_ACTION="Import Dave's cert into Bob's DB"
certu -E -t "p,p,p" -d ${P_R_BOBDIR} -f ${R_PWFILE} \
-i ${R_DAVEDIR}/Dave.cert 2>&1
CU_ACTION="Import Eve's cert into Alice's DB"
certu -E -t "p,p,p" -d ${P_R_ALICEDIR} -f ${R_PWFILE} \
-i ${R_EVEDIR}/Eve.cert 2>&1
CU_ACTION="Import Eve's cert into Bob's DB"
certu -E -t "p,p,p" -d ${P_R_BOBDIR} -f ${R_PWFILE} \
-i ${R_EVEDIR}/Eve.cert 2>&1
if [ -n "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: Importing EC Certificates =============================="
CU_ACTION="Import Bob's EC cert into Alice's db"
certu -E -t "p,p,p" -d ${P_R_ALICEDIR} -f ${R_PWFILE} \
-i ${R_BOBDIR}/Bob-ec.cert 2>&1
CU_ACTION="Import Dave's EC cert into Alice's DB"
certu -E -t "p,p,p" -d ${P_R_ALICEDIR} -f ${R_PWFILE} \
-i ${R_DAVEDIR}/Dave-ec.cert 2>&1
CU_ACTION="Import Dave's EC cert into Bob's DB"
certu -E -t "p,p,p" -d ${P_R_BOBDIR} -f ${R_PWFILE} \
-i ${R_DAVEDIR}/Dave-ec.cert 2>&1
## XXXX Do not import Eve's EC cert until we can make sure that
## the email addresses listed in the Subject Alt Name Extension
## inside Eve's ECC and non-ECC certs are different.
# CU_ACTION="Import Eve's EC cert into Alice's DB"
# certu -E -t "p,p,p" -d ${P_R_ALICEDIR} -f ${R_PWFILE} \
# -i ${R_EVEDIR}/Eve-ec.cert 2>&1
# CU_ACTION="Import Eve's EC cert into Bob's DB"
# certu -E -t "p,p,p" -d ${P_R_BOBDIR} -f ${R_PWFILE} \
# -i ${R_EVEDIR}/Eve-ec.cert 2>&1
fi
if [ "$CERTFAILED" != 0 ] ; then
cert_log "ERROR: SMIME failed $RET"
else
cert_log "SUCCESS: SMIME passed"
fi
}
############################## cert_extended_ssl #######################
# local shell function to create client + server certs for extended SSL test
########################################################################
cert_extended_ssl()
{
################# Creating Certs for extended SSL test ####################
#
CERTFAILED=0
echo "$SCRIPTNAME: Creating Certificates, issued by the last ==============="
echo " of a chain of CA's which are not in the same database============"
echo "Server Cert"
cert_init_cert ${EXT_SERVERDIR} "${HOSTADDR}" 1 ${D_EXT_SERVER}
CU_ACTION="Initializing ${CERTNAME}'s Cert DB (ext.)"
certu -N -d "${PROFILEDIR}" -f "${R_PWFILE}" 2>&1
CU_ACTION="Loading root cert module to ${CERTNAME}'s Cert DB (ext.)"
modu -add "RootCerts" -libfile "${ROOTCERTSFILE}" -dbdir "${PROFILEDIR}" 2>&1
CU_ACTION="Generate Cert Request for $CERTNAME (ext)"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -d "${PROFILEDIR}" -f "${R_PWFILE}" -z "${R_NOISE_FILE}" -o req 2>&1
CU_ACTION="Sign ${CERTNAME}'s Request (ext)"
cp ${CERTDIR}/req ${SERVER_CADIR}
certu -C -c "chain-2-serverCA" -m 200 -v 60 -d "${P_SERVER_CADIR}" \
-i req -o "${CERTNAME}.cert" -f "${R_PWFILE}" 2>&1
CU_ACTION="Import $CERTNAME's Cert -t u,u,u (ext)"
certu -A -n "$CERTNAME" -t "u,u,u" -d "${PROFILEDIR}" -f "${R_PWFILE}" \
-i "${CERTNAME}.cert" 2>&1
CU_ACTION="Import Client Root CA -t T,, for $CERTNAME (ext.)"
certu -A -n "clientCA" -t "T,," -f "${R_PWFILE}" -d "${PROFILEDIR}" \
-i "${CLIENT_CADIR}/clientCA.ca.cert" 2>&1
if [ -n "$NSS_ENABLE_ECC" ] ; then
#
# Repeat the above for EC certs
#
EC_CURVE="secp256r1"
CU_ACTION="Generate EC Cert Request for $CERTNAME (ext)"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}-ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -d "${PROFILEDIR}" -k ec -q "${EC_CURVE}" -f "${R_PWFILE}" \
-z "${R_NOISE_FILE}" -o req 2>&1
CU_ACTION="Sign ${CERTNAME}'s EC Request (ext)"
cp ${CERTDIR}/req ${SERVER_CADIR}
certu -C -c "chain-2-serverCA-ec" -m 200 -v 60 -d "${P_SERVER_CADIR}" \
-i req -o "${CERTNAME}-ec.cert" -f "${R_PWFILE}" 2>&1
CU_ACTION="Import $CERTNAME's EC Cert -t u,u,u (ext)"
certu -A -n "${CERTNAME}-ec" -t "u,u,u" -d "${PROFILEDIR}" \
-f "${R_PWFILE}" -i "${CERTNAME}-ec.cert" 2>&1
CU_ACTION="Import Client EC Root CA -t T,, for $CERTNAME (ext.)"
certu -A -n "clientCA-ec" -t "T,," -f "${R_PWFILE}" -d "${PROFILEDIR}" \
-i "${CLIENT_CADIR}/clientCA-ec.ca.cert" 2>&1
#
# done with EC certs
#
# Repeat again for mixed EC certs
#
EC_CURVE="secp256r1"
CU_ACTION="Generate mixed EC Cert Request for $CERTNAME (ext)"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}-ecmixed@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -d "${PROFILEDIR}" -k ec -q "${EC_CURVE}" -f "${R_PWFILE}" \
-z "${R_NOISE_FILE}" -o req 2>&1
CU_ACTION="Sign ${CERTNAME}'s mixed EC Request (ext)"
cp ${CERTDIR}/req ${SERVER_CADIR}
certu -C -c "chain-2-serverCA" -m 201 -v 60 -d "${P_SERVER_CADIR}" \
-i req -o "${CERTNAME}-ecmixed.cert" -f "${R_PWFILE}" 2>&1
CU_ACTION="Import $CERTNAME's mixed EC Cert -t u,u,u (ext)"
certu -A -n "${CERTNAME}-ecmixed" -t "u,u,u" -d "${PROFILEDIR}" \
-f "${R_PWFILE}" -i "${CERTNAME}-ecmixed.cert" 2>&1
# CU_ACTION="Import Client mixed EC Root CA -t T,, for $CERTNAME (ext.)"
# certu -A -n "clientCA-ecmixed" -t "T,," -f "${R_PWFILE}" \
# -d "${PROFILEDIR}" -i "${CLIENT_CADIR}/clientCA-ecmixed.ca.cert" \
# 2>&1
fi
echo "Importing all the server's own CA chain into the servers DB"
for CA in `find ${SERVER_CADIR} -name "?*.ca.cert"` ;
do
N=`basename $CA | sed -e "s/.ca.cert//"`
if [ $N = "serverCA" -o $N = "serverCA-ec" ] ; then
T="-t C,C,C"
else
T="-t u,u,u"
fi
CU_ACTION="Import $N CA $T for $CERTNAME (ext.) "
certu -A -n $N $T -f "${R_PWFILE}" -d "${PROFILEDIR}" \
-i "${CA}" 2>&1
done
#============
echo "Client Cert"
cert_init_cert ${EXT_CLIENTDIR} ExtendedSSLUser 1 ${D_EXT_CLIENT}
CU_ACTION="Initializing ${CERTNAME}'s Cert DB (ext.)"
certu -N -d "${PROFILEDIR}" -f "${R_PWFILE}" 2>&1
CU_ACTION="Loading root cert module to ${CERTNAME}'s Cert DB (ext.)"
modu -add "RootCerts" -libfile "${ROOTCERTSFILE}" -dbdir "${PROFILEDIR}" 2>&1
CU_ACTION="Generate Cert Request for $CERTNAME (ext)"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -d "${PROFILEDIR}" -f "${R_PWFILE}" -z "${R_NOISE_FILE}" \
-o req 2>&1
CU_ACTION="Sign ${CERTNAME}'s Request (ext)"
cp ${CERTDIR}/req ${CLIENT_CADIR}
certu -C -c "chain-2-clientCA" -m 300 -v 60 -d "${P_CLIENT_CADIR}" \
-i req -o "${CERTNAME}.cert" -f "${R_PWFILE}" 2>&1
CU_ACTION="Import $CERTNAME's Cert -t u,u,u (ext)"
certu -A -n "$CERTNAME" -t "u,u,u" -d "${PROFILEDIR}" -f "${R_PWFILE}" \
-i "${CERTNAME}.cert" 2>&1
CU_ACTION="Import Server Root CA -t C,C,C for $CERTNAME (ext.)"
certu -A -n "serverCA" -t "C,C,C" -f "${R_PWFILE}" -d "${PROFILEDIR}" \
-i "${SERVER_CADIR}/serverCA.ca.cert" 2>&1
if [ -n "$NSS_ENABLE_ECC" ] ; then
#
# Repeat the above for EC certs
#
CU_ACTION="Generate EC Cert Request for $CERTNAME (ext)"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}-ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -d "${PROFILEDIR}" -k ec -q "${EC_CURVE}" -f "${R_PWFILE}" \
-z "${R_NOISE_FILE}" -o req 2>&1
CU_ACTION="Sign ${CERTNAME}'s EC Request (ext)"
cp ${CERTDIR}/req ${CLIENT_CADIR}
certu -C -c "chain-2-clientCA-ec" -m 300 -v 60 -d "${P_CLIENT_CADIR}" \
-i req -o "${CERTNAME}-ec.cert" -f "${R_PWFILE}" 2>&1
CU_ACTION="Import $CERTNAME's EC Cert -t u,u,u (ext)"
certu -A -n "${CERTNAME}-ec" -t "u,u,u" -d "${PROFILEDIR}" \
-f "${R_PWFILE}" -i "${CERTNAME}-ec.cert" 2>&1
CU_ACTION="Import Server EC Root CA -t C,C,C for $CERTNAME (ext.)"
certu -A -n "serverCA-ec" -t "C,C,C" -f "${R_PWFILE}" \
-d "${PROFILEDIR}" -i "${SERVER_CADIR}/serverCA-ec.ca.cert" 2>&1
#
# done with EC certs
#
#
# Repeat the above for mixed EC certs
#
CU_ACTION="Generate mixed EC Cert Request for $CERTNAME (ext)"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}-ecmixed@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -d "${PROFILEDIR}" -k ec -q "${EC_CURVE}" -f "${R_PWFILE}" \
-z "${R_NOISE_FILE}" -o req 2>&1
CU_ACTION="Sign ${CERTNAME}'s mixed EC Request (ext)"
cp ${CERTDIR}/req ${CLIENT_CADIR}
certu -C -c "chain-2-clientCA" -m 301 -v 60 -d "${P_CLIENT_CADIR}" \
-i req -o "${CERTNAME}-ecmixed.cert" -f "${R_PWFILE}" 2>&1
CU_ACTION="Import $CERTNAME's mixed EC Cert -t u,u,u (ext)"
certu -A -n "${CERTNAME}-ecmixed" -t "u,u,u" -d "${PROFILEDIR}" \
-f "${R_PWFILE}" -i "${CERTNAME}-ecmixed.cert" 2>&1
# CU_ACTION="Import Server EC Root CA -t C,C,C for $CERTNAME (ext.)"
# certu -A -n "serverCA-ec" -t "C,C,C" -f "${R_PWFILE}" \
# -d "${PROFILEDIR}" -i "${SERVER_CADIR}/serverCA-ec.ca.cert" 2>&1
#
# done with mixed EC certs
#
fi
echo "Importing all the client's own CA chain into the servers DB"
for CA in `find ${CLIENT_CADIR} -name "?*.ca.cert"` ;
do
N=`basename $CA | sed -e "s/.ca.cert//"`
if [ $N = "clientCA" -o $N = "clientCA-ec" ] ; then
T="-t T,C,C"
else
T="-t u,u,u"
fi
CU_ACTION="Import $N CA $T for $CERTNAME (ext.)"
certu -A -n $N $T -f "${R_PWFILE}" -d "${PROFILEDIR}" \
-i "${CA}" 2>&1
done
if [ "$CERTFAILED" != 0 ] ; then
cert_log "ERROR: EXT failed $RET"
else
cert_log "SUCCESS: EXT passed"
fi
}
############################## cert_ssl ################################
# local shell function to create client + server certs for SSL test
########################################################################
cert_ssl()
{
################# Creating Certs for SSL test ###########################
#
CERTFAILED=0
echo "$SCRIPTNAME: Creating Client CA Issued Certificates ==============="
cert_create_cert ${CLIENTDIR} "TestUser" 70 ${D_CLIENT}
echo "$SCRIPTNAME: Creating Server CA Issued Certificate for \\"
echo " ${HOSTADDR} ------------------------------------"
cert_create_cert ${SERVERDIR} "${HOSTADDR}" 100 ${D_SERVER}
CU_ACTION="Modify trust attributes of Root CA -t TC,TC,TC"
certu -M -n "TestCA" -t "TC,TC,TC" -d ${PROFILEDIR} -f "${R_PWFILE}"
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Modify trust attributes of EC Root CA -t TC,TC,TC"
certu -M -n "TestCA-ec" -t "TC,TC,TC" -d ${PROFILEDIR} -f "${R_PWFILE}"
fi
# cert_init_cert ${SERVERDIR} "${HOSTADDR}" 1 ${D_SERVER}
# echo "************* Copying CA files to ${SERVERDIR}"
# cp ${CADIR}/*.db .
# hw_acc
# CU_ACTION="Creating ${CERTNAME}'s Server Cert"
# CU_SUBJECT="CN=${CERTNAME}, O=BOGUS Netscape, L=Mountain View, ST=California, C=US"
# certu -S -n "${CERTNAME}" -c "TestCA" -t "Pu,Pu,Pu" -d ${PROFILEDIR} \
# -f "${R_PWFILE}" -z "${R_NOISE_FILE}" -v 60 2>&1
if [ "$CERTFAILED" != 0 ] ; then
cert_log "ERROR: SSL failed $RET"
else
cert_log "SUCCESS: SSL passed"
fi
}
############################## cert_stresscerts ################################
# local shell function to create client certs for SSL stresstest
########################################################################
cert_stresscerts()
{
############### Creating Certs for SSL stress test #######################
#
CERTDIR="$CLIENTDIR"
cd "${CERTDIR}"
PROFILEDIR=`cd ${CERTDIR}; pwd`
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
PROFILEDIR=`cygpath -m ${PROFILEDIR}`
fi
if [ -n "${MULTIACCESS_DBM}" ]; then
PROFILEDIR="multiaccess:${D_CLIENT}"
fi
CERTFAILED=0
echo "$SCRIPTNAME: Creating Client CA Issued Certificates ==============="
CONTINUE=$GLOB_MAX_CERT
CERTSERIAL=10
while [ $CONTINUE -ge $GLOB_MIN_CERT ]
do
CERTNAME="TestUser$CONTINUE"
# cert_add_cert ${CLIENTDIR} "TestUser$CONTINUE" $CERTSERIAL
cert_add_cert
CERTSERIAL=`expr $CERTSERIAL + 1 `
CONTINUE=`expr $CONTINUE - 1 `
done
if [ "$CERTFAILED" != 0 ] ; then
cert_log "ERROR: StressCert failed $RET"
else
cert_log "SUCCESS: StressCert passed"
fi
}
############################## cert_fips #####################################
# local shell function to create certificates for FIPS tests
##############################################################################
cert_fips()
{
CERTFAILED=0
echo "$SCRIPTNAME: Creating FIPS 140 DSA Certificates =============="
cert_init_cert "${FIPSDIR}" "FIPS PUB 140 Test Certificate" 1000 "${D_FIPS}"
CU_ACTION="Initializing ${CERTNAME}'s Cert DB"
certu -N -d "${PROFILEDIR}" -f "${R_FIPSPWFILE}" 2>&1
CU_ACTION="Loading root cert module to ${CERTNAME}'s Cert DB (ext.)"
modu -add "RootCerts" -libfile "${ROOTCERTSFILE}" -dbdir "${PROFILEDIR}" 2>&1
echo "$SCRIPTNAME: Enable FIPS mode on database -----------------------"
CU_ACTION="Enable FIPS mode on database for ${CERTNAME}"
echo "modutil -dbdir ${PROFILEDIR} -fips true "
${BINDIR}/modutil -dbdir ${PROFILEDIR} -fips true 2>&1 <<MODSCRIPT
y
MODSCRIPT
RET=$?
if [ "$RET" -ne 0 ]; then
html_failed "${CU_ACTION} ($RET) "
cert_log "ERROR: ${CU_ACTION} failed $RET"
else
html_passed "${CU_ACTION}"
fi
CU_ACTION="Generate Certificate for ${CERTNAME}"
CU_SUBJECT="CN=${CERTNAME}, E=fips@bogus.com, O=BOGUS NSS, OU=FIPS PUB 140, L=Mountain View, ST=California, C=US"
certu -S -n ${FIPSCERTNICK} -x -t "Cu,Cu,Cu" -d "${PROFILEDIR}" -f "${R_FIPSPWFILE}" -k dsa -v 600 -m 500 -z "${R_NOISE_FILE}" 2>&1
if [ "$RET" -eq 0 ]; then
cert_log "SUCCESS: FIPS passed"
fi
}
############################## cert_eccurves ###########################
# local shell function to create server certs for all EC curves
########################################################################
cert_eccurves()
{
################# Creating Certs for EC curves test ########################
#
if [ -n "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: Creating Server CA Issued Certificate for "
echo " EC Curves Test Certificates ------------------------------------"
cert_init_cert "${ECCURVES_DIR}" "EC Curves Test Certificates" 1 ${D_ECCURVES}
CU_ACTION="Initializing EC Curve's Cert DB"
certu -N -d "${PROFILEDIR}" -f "${R_PWFILE}" 2>&1
CU_ACTION="Loading root cert module to EC Curve's Cert DB"
modu -add "RootCerts" -libfile "${ROOTCERTSFILE}" -dbdir "${PROFILEDIR}" 2>&1
CU_ACTION="Import EC Root CA for $CERTNAME"
certu -A -n "TestCA-ec" -t "TC,TC,TC" -f "${R_PWFILE}" \
-d "${PROFILEDIR}" -i "${R_CADIR}/ecroot.cert" 2>&1
if [ -n "${NSS_ECC_MORE_THAN_SUITE_B}" ] ; then
CURVE_LIST="c2pnb163v1 c2pnb163v2 c2pnb163v3 c2pnb176v1 \
c2pnb208w1 c2pnb272w1 c2pnb304w1 c2pnb368w1 \
c2tnb191v1 c2tnb191v2 c2tnb191v3 c2tnb239v1 \
c2tnb239v2 c2tnb239v3 c2tnb359v1 c2tnb431r1 \
nistb163 nistb233 nistb283 nistb409 nistb571 \
nistk163 nistk233 nistk283 nistk409 nistk571 \
nistp192 nistp224 nistp256 nistp384 nistp521 \
prime192v1 prime192v2 prime192v3 \
prime239v1 prime239v2 prime239v3 \
secp112r1 secp112r2 secp128r1 secp128r2 secp160k1 \
secp160r1 secp160r2 secp192k1 secp192r1 secp224k1 \
secp224r1 secp256k1 secp256r1 secp384r1 secp521r1 \
sect113r1 sect113r2 sect131r1 sect131r2 sect163k1 sect163r1 \
sect163r2 sect193r1 sect193r2 sect233k1 sect233r1 sect239k1 \
sect283k1 sect283r1 sect409k1 sect409r1 sect571k1 sect571r1"
else
CURVE_LIST="nistp256 nistp384 nistp521"
fi
CERTSERIAL=2000
for CURVE in ${CURVE_LIST}
do
CERTFAILED=0
CERTNAME="Curve-${CURVE}"
CERTSERIAL=`expr $CERTSERIAL + 1 `
CU_ACTION="Generate EC Cert Request for $CERTNAME"
CU_SUBJECT="CN=$CERTNAME, E=${CERTNAME}-ec@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -R -k ec -q "${CURVE}" -d "${PROFILEDIR}" -f "${R_PWFILE}" \
-z "${R_NOISE_FILE}" -o req 2>&1
if [ $RET -eq 0 ] ; then
CU_ACTION="Sign ${CERTNAME}'s EC Request"
certu -C -c "TestCA-ec" -m "$CERTSERIAL" -v 60 -d "${P_R_CADIR}" \
-i req -o "${CERTNAME}-ec.cert" -f "${R_PWFILE}" "$1" 2>&1
fi
if [ $RET -eq 0 ] ; then
CU_ACTION="Import $CERTNAME's EC Cert"
certu -A -n "${CERTNAME}-ec" -t "u,u,u" -d "${PROFILEDIR}" \
-f "${R_PWFILE}" -i "${CERTNAME}-ec.cert" 2>&1
fi
done
fi # if NSS_ENABLE_ECC=1
}
########################### cert_extensions_test #############################
# local shell function to test cert extensions generation
##############################################################################
cert_extensions_test()
2008-06-06 05:40:11 -07:00
{
COUNT=`expr ${COUNT} + 1`
CERTNAME=TestExt${COUNT}
CU_SUBJECT="CN=${CERTNAME}, E=${CERTNAME}@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
echo
echo certutil -d ${CERT_EXTENSIONS_DIR} -S -n ${CERTNAME} \
-t "u,u,u" -o /tmp/cert -s "${CU_SUBJECT}" -x -f ${R_PWFILE} \
-z "${R_NOISE_FILE}" -${OPT} \< ${TARG_FILE}
echo "certutil options:"
cat ${TARG_FILE}
${BINDIR}/certutil -d ${CERT_EXTENSIONS_DIR} -S -n ${CERTNAME} \
-t "u,u,u" -o /tmp/cert -s "${CU_SUBJECT}" -x -f ${R_PWFILE} \
-z "${R_NOISE_FILE}" -${OPT} < ${TARG_FILE}
RET=$?
if [ "${RET}" -ne 0 ]; then
CERTFAILED=1
html_failed "${TESTNAME} (${COUNT}) - Create and Add Certificate"
cert_log "ERROR: ${TESTNAME} - Create and Add Certificate failed"
return 1
fi
echo certutil -d ${CERT_EXTENSIONS_DIR} -L -n ${CERTNAME}
EXTLIST=`${BINDIR}/certutil -d ${CERT_EXTENSIONS_DIR} -L -n ${CERTNAME}`
RET=$?
echo "${EXTLIST}"
if [ "${RET}" -ne 0 ]; then
CERTFAILED=1
html_failed "${TESTNAME} (${COUNT}) - List Certificate"
cert_log "ERROR: ${TESTNAME} - List Certificate failed"
return 1
fi
for FL in `echo ${FILTERLIST} | tr \| ' '`; do
FL="`echo ${FL} | tr _ ' '`"
EXPSTAT=0
if [ X`echo "${FL}" | cut -c 1` = 'X!' ]; then
EXPSTAT=1
FL=`echo ${FL} | tr -d '!'`
fi
echo "${EXTLIST}" | grep "${FL}" >/dev/null 2>&1
RET=$?
if [ "${RET}" -ne "${EXPSTAT}" ]; then
CERTFAILED=1
html_failed "${TESTNAME} (${COUNT}) - Looking for ${FL}" "returned ${RET}, expected is ${EXPSTAT}"
cert_log "ERROR: ${TESTNAME} - Looking for ${FL} failed"
return 1
2008-06-06 05:40:11 -07:00
fi
done
html_passed "${TESTNAME} (${COUNT})"
2008-06-06 05:40:11 -07:00
return 0
}
############################## cert_extensions ###############################
# local shell function to run cert extensions tests
##############################################################################
2008-06-06 05:40:11 -07:00
cert_extensions()
{
CERTNAME=TestExt
cert_create_cert ${CERT_EXTENSIONS_DIR} ${CERTNAME} 90 ${D_CERT_EXTENSTIONS}
2008-06-06 05:40:11 -07:00
TARG_FILE=${CERT_EXTENSIONS_DIR}/test.args
COUNT=0
while read ARG OPT FILTERLIST; do
if [ X"`echo ${ARG} | cut -c 1`" = "X#" ]; then
2008-06-06 05:40:11 -07:00
continue
fi
if [ X"`echo ${ARG} | cut -c 1`" = "X!" ]; then
TESTNAME="${FILTERLIST}"
2008-06-06 05:40:11 -07:00
continue
fi
if [ X"${ARG}" = "X=" ]; then
cert_extensions_test
rm -f ${TARG_FILE}
2008-06-06 05:40:11 -07:00
else
echo ${ARG} >> ${TARG_FILE}
2008-06-06 05:40:11 -07:00
fi
done < ${QADIR}/cert/certext.txt
}
############################## cert_crl_ssl ############################
# local shell function to generate certs and crls for SSL tests
########################################################################
cert_crl_ssl()
{
################# Creating Certs ###################################
#
CERTFAILED=0
CERTSERIAL=${CRL_GRP_1_BEGIN}
cd $CADIR
PROFILEDIR=`cd ${CLIENTDIR}; pwd`
if [ "${OS_ARCH}" = "WINNT" -a "$OS_NAME" = "CYGWIN_NT" ]; then
PROFILEDIR=`cygpath -m ${PROFILEDIR}`
fi
CRL_GRPS_END=`expr ${CRL_GRP_1_BEGIN} + ${TOTAL_CRL_RANGE} - 1`
echo "$SCRIPTNAME: Creating Client CA Issued Certificates Range $CRL_GRP_1_BEGIN - $CRL_GRPS_END ==="
CU_ACTION="Creating client test certs"
while [ $CERTSERIAL -le $CRL_GRPS_END ]
do
CERTNAME="TestUser$CERTSERIAL"
cert_add_cert
CERTSERIAL=`expr $CERTSERIAL + 1 `
done
#################### CRL Creation ##############################
CRL_GEN_RES=0
echo "$SCRIPTNAME: Creating CA CRL ====================================="
CRL_GRP_END=`expr ${CRL_GRP_1_BEGIN} + ${CRL_GRP_1_RANGE} - 1`
CRL_FILE_GRP_1=${R_SERVERDIR}/root.crl_${CRL_GRP_1_BEGIN}-${CRL_GRP_END}
CRL_FILE=${CRL_FILE_GRP_1}
CRLUPDATE=`date -u "+%Y%m%d%H%M%SZ"`
CU_ACTION="Generating CRL for range ${CRL_GRP_1_BEGIN}-${CRL_GRP_END} TestCA authority"
CRL_GRP_END_=`expr ${CRL_GRP_END} - 1`
crlu -d $CADIR -G -n "TestCA" -f ${R_PWFILE} \
-o ${CRL_FILE_GRP_1}_or <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_1_BEGIN}-${CRL_GRP_END_} $CRL_GRP_DATE
addext reasonCode 0 4
addext issuerAltNames 0 "rfc822Name:caemail@ca.com|dnsName:ca.com|directoryName:CN=NSS Test CA,O=BOGUS NSS,L=Mountain View,ST=California,C=US|URI:http://ca.com|ipAddress:192.168.0.1|registerID=reg CA"
EOF_CRLINI
# This extension should be added to the list, but currently nss has bug
#addext authKeyId 0 "CN=NSS Test CA,O=BOGUS NSS,L=Mountain View,ST=California,C=US" 1
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_1}_or
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Generating CRL (ECC) for range ${CRL_GRP_1_BEGIN}-${CRL_GRP_END} TestCA-ec authority"
# Until Bug 292285 is resolved, do not encode x400 Addresses. After
# the bug is resolved, reintroduce "x400Address:x400Address" within
# addext issuerAltNames ...
crlu -q -d $CADIR -G -n "TestCA-ec" -f ${R_PWFILE} \
-o ${CRL_FILE_GRP_1}_or-ec <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_1_BEGIN}-${CRL_GRP_END_} $CRL_GRP_DATE
addext reasonCode 0 4
addext issuerAltNames 0 "rfc822Name:ca-ecemail@ca.com|dnsName:ca-ec.com|directoryName:CN=NSS Test CA (ECC),O=BOGUS NSS,L=Mountain View,ST=California,C=US|URI:http://ca-ec.com|ipAddress:192.168.0.1|registerID=reg CA (ECC)"
EOF_CRLINI
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_1}_or-ec
fi
echo test > file
############################# Modification ##################################
echo "$SCRIPTNAME: Modifying CA CRL by adding one more cert ============"
sleep 2
CRLUPDATE=`date -u "+%Y%m%d%H%M%SZ"`
CRL_GRP_DATE=`date -u "+%Y%m%d%H%M%SZ"`
CU_ACTION="Modify CRL by adding one more cert"
crlu -d $CADIR -M -n "TestCA" -f ${R_PWFILE} -o ${CRL_FILE_GRP_1}_or1 \
-i ${CRL_FILE_GRP_1}_or <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_END} $CRL_GRP_DATE
EOF_CRLINI
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_1}_or1
TEMPFILES="$TEMPFILES ${CRL_FILE_GRP_1}_or"
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Modify CRL (ECC) by adding one more cert"
crlu -d $CADIR -M -n "TestCA-ec" -f ${R_PWFILE} \
-o ${CRL_FILE_GRP_1}_or1-ec -i ${CRL_FILE_GRP_1}_or-ec <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_END} $CRL_GRP_DATE
EOF_CRLINI
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_1}_or1-ec
TEMPFILES="$TEMPFILES ${CRL_FILE_GRP_1}_or-ec"
fi
########### Removing one cert ${UNREVOKED_CERT_GRP_1} #######################
echo "$SCRIPTNAME: Modifying CA CRL by removing one cert ==============="
CU_ACTION="Modify CRL by removing one cert"
sleep 2
CRLUPDATE=`date -u "+%Y%m%d%H%M%SZ"`
crlu -d $CADIR -M -n "TestCA" -f ${R_PWFILE} -o ${CRL_FILE_GRP_1} \
-i ${CRL_FILE_GRP_1}_or1 <<EOF_CRLINI
update=$CRLUPDATE
rmcert ${UNREVOKED_CERT_GRP_1}
EOF_CRLINI
chmod 600 ${CRL_FILE_GRP_1}
TEMPFILES="$TEMPFILES ${CRL_FILE_GRP_1}_or1"
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Modify CRL (ECC) by removing one cert"
crlu -d $CADIR -M -n "TestCA-ec" -f ${R_PWFILE} -o ${CRL_FILE_GRP_1}-ec \
-i ${CRL_FILE_GRP_1}_or1-ec <<EOF_CRLINI
update=$CRLUPDATE
rmcert ${UNREVOKED_CERT_GRP_1}
EOF_CRLINI
chmod 600 ${CRL_FILE_GRP_1}-ec
TEMPFILES="$TEMPFILES ${CRL_FILE_GRP_1}_or1-ec"
fi
########### Creating second CRL which includes groups 1 and 2 ##############
CRL_GRP_END=`expr ${CRL_GRP_2_BEGIN} + ${CRL_GRP_2_RANGE} - 1`
CRL_FILE_GRP_2=${R_SERVERDIR}/root.crl_${CRL_GRP_2_BEGIN}-${CRL_GRP_END}
echo "$SCRIPTNAME: Creating CA CRL for groups 1 and 2 ==============="
sleep 2
CRLUPDATE=`date -u "+%Y%m%d%H%M%SZ"`
CRL_GRP_DATE=`date -u "+%Y%m%d%H%M%SZ"`
CU_ACTION="Creating CRL for groups 1 and 2"
crlu -d $CADIR -M -n "TestCA" -f ${R_PWFILE} -o ${CRL_FILE_GRP_2} \
-i ${CRL_FILE_GRP_1} <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_2_BEGIN}-${CRL_GRP_END} $CRL_GRP_DATE
addext invalidityDate 0 $CRLUPDATE
rmcert ${UNREVOKED_CERT_GRP_2}
EOF_CRLINI
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_2}
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Creating CRL (ECC) for groups 1 and 2"
crlu -d $CADIR -M -n "TestCA-ec" -f ${R_PWFILE} -o ${CRL_FILE_GRP_2}-ec \
-i ${CRL_FILE_GRP_1}-ec <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_2_BEGIN}-${CRL_GRP_END} $CRL_GRP_DATE
addext invalidityDate 0 $CRLUPDATE
rmcert ${UNREVOKED_CERT_GRP_2}
EOF_CRLINI
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_2}-ec
fi
########### Creating second CRL which includes groups 1, 2 and 3 ##############
CRL_GRP_END=`expr ${CRL_GRP_3_BEGIN} + ${CRL_GRP_3_RANGE} - 1`
CRL_FILE_GRP_3=${R_SERVERDIR}/root.crl_${CRL_GRP_3_BEGIN}-${CRL_GRP_END}
echo "$SCRIPTNAME: Creating CA CRL for groups 1, 2 and 3 ==============="
sleep 2
CRLUPDATE=`date -u "+%Y%m%d%H%M%SZ"`
CRL_GRP_DATE=`date -u "+%Y%m%d%H%M%SZ"`
CU_ACTION="Creating CRL for groups 1, 2 and 3"
crlu -d $CADIR -M -n "TestCA" -f ${R_PWFILE} -o ${CRL_FILE_GRP_3} \
-i ${CRL_FILE_GRP_2} <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_3_BEGIN}-${CRL_GRP_END} $CRL_GRP_DATE
rmcert ${UNREVOKED_CERT_GRP_3}
addext crlNumber 0 2
EOF_CRLINI
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_3}
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Creating CRL (ECC) for groups 1, 2 and 3"
crlu -d $CADIR -M -n "TestCA-ec" -f ${R_PWFILE} -o ${CRL_FILE_GRP_3}-ec \
-i ${CRL_FILE_GRP_2}-ec <<EOF_CRLINI
update=$CRLUPDATE
addcert ${CRL_GRP_3_BEGIN}-${CRL_GRP_END} $CRL_GRP_DATE
rmcert ${UNREVOKED_CERT_GRP_3}
addext crlNumber 0 2
EOF_CRLINI
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
chmod 600 ${CRL_FILE_GRP_3}-ec
fi
############ Importing Server CA Issued CRL for certs of first group #######
echo "$SCRIPTNAME: Importing Server CA Issued CRL for certs ${CRL_GRP_BEGIN} trough ${CRL_GRP_END}"
CU_ACTION="Importing CRL for groups 1"
crlu -D -n TestCA -f "${R_PWFILE}" -d "${R_SERVERDIR}"
crlu -I -i ${CRL_FILE} -n "TestCA" -f "${R_PWFILE}" -d "${R_SERVERDIR}"
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
if [ -n "$NSS_ENABLE_ECC" ] ; then
CU_ACTION="Importing CRL (ECC) for groups 1"
crlu -D -n TestCA-ec -f "${R_PWFILE}" -d "${R_SERVERDIR}"
crlu -I -i ${CRL_FILE}-ec -n "TestCA-ec" -f "${R_PWFILE}" \
-d "${R_SERVERDIR}"
CRL_GEN_RES=`expr $? + $CRL_GEN_RES`
fi
if [ "$CERTFAILED" != 0 -o "$CRL_GEN_RES" != 0 ] ; then
cert_log "ERROR: SSL CRL prep failed $CERTFAILED : $CRL_GEN_RES"
else
cert_log "SUCCESS: SSL CRL prep passed"
fi
}
#################
# Verify the we can successfully change the password on the database
#
cert_test_password()
{
CERTFAILED=0
echo "$SCRIPTNAME: Create A Password Test Cert =============="
cert_init_cert "${DBPASSDIR}" "Password Test Cert" 1000 "${D_DBPASSDIR}"
echo "$SCRIPTNAME: Create A Password Test Ca --------"
ALL_CU_SUBJECT="CN=NSS Password Test CA, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
cert_CA ${DBPASSDIR} PasswordCA -x "CTu,CTu,CTu" ${D_DBPASS} "1"
# now change the password
CU_ACTION="Changing password on ${CERTNAME}'s Cert DB"
certu -W -d "${PROFILEDIR}" -f "${R_PWFILE}" -@ "${R_FIPSPWFILE}" 2>&1
# finally make sure we can use the old key with the new password
CU_ACTION="Generate Certificate for ${CERTNAME} with new password"
CU_SUBJECT="CN=${CERTNAME}, E=password@bogus.com, O=BOGUS NSS, L=Mountain View, ST=California, C=US"
certu -S -n PasswordCert -c PasswordCA -t "u,u,u" -d "${PROFILEDIR}" -f "${R_FIPSPWFILE}" -z "${R_NOISE_FILE}" 2>&1
if [ "$RET" -eq 0 ]; then
cert_log "SUCCESS: PASSWORD passed"
2008-06-06 05:40:11 -07:00
fi
CU_ACTION="Verify Certificate for ${CERTNAME} with new password"
certu -V -n PasswordCert -u S -d "${PROFILEDIR}" -f "${R_FIPSPWFILE}" 2>&1
}
############################## cert_cleanup ############################
# local shell function to finish this script (no exit since it might be
# sourced)
########################################################################
cert_cleanup()
{
cert_log "$SCRIPTNAME: finished $SCRIPTNAME"
html "</TABLE><BR>"
cd ${QADIR}
. common/cleanup.sh
}
################## main #################################################
cert_init
cert_all_CA
cert_extended_ssl
cert_ssl
cert_smime_client
cert_fips
cert_eccurves
cert_extensions
cert_test_password
if [ -z "$NSS_TEST_DISABLE_CRL" ] ; then
cert_crl_ssl
else
echo "$SCRIPTNAME: Skipping CRL Tests"
fi
if [ -n "$DO_DIST_ST" -a "$DO_DIST_ST" = "TRUE" ] ; then
cert_stresscerts
fi
cert_iopr_setup
cert_cleanup