gecko/xpcom/ds/TimeStamp_posix.cpp

364 lines
8.8 KiB
C++
Raw Normal View History

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim:set ts=2 sw=2 sts=2 et cindent: */
2012-05-21 04:12:37 -07:00
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
//
// Implement TimeStamp::Now() with POSIX clocks.
//
// The "tick" unit for POSIX clocks is simply a nanosecond, as this is
// the smallest unit of time representable by struct timespec. That
// doesn't mean that a nanosecond is the resolution of TimeDurations
// obtained with this API; see TimeDuration::Resolution;
//
#include <sys/syscall.h>
#include <time.h>
#include <unistd.h>
#if defined(__DragonFly__) || defined(__FreeBSD__) \
|| defined(__NetBSD__) || defined(__OpenBSD__)
#include <sys/param.h>
#include <sys/sysctl.h>
#endif
#if defined(__DragonFly__) || defined(__FreeBSD__)
#include <sys/user.h>
#endif
#if defined(__NetBSD__)
#undef KERN_PROC
#define KERN_PROC KERN_PROC2
#define KINFO_PROC struct kinfo_proc2
#else
#define KINFO_PROC struct kinfo_proc
#endif
#if defined(__DragonFly__)
#define KP_START_SEC kp_start.tv_sec
#define KP_START_USEC kp_start.tv_usec
#elif defined(__FreeBSD__)
#define KP_START_SEC ki_start.tv_sec
#define KP_START_USEC ki_start.tv_usec
#else
#define KP_START_SEC p_ustart_sec
#define KP_START_USEC p_ustart_usec
#endif
#include "mozilla/TimeStamp.h"
#include "nsCRT.h"
#include "prprf.h"
#include "prthread.h"
#include "nsDebug.h"
// Estimate of the smallest duration of time we can measure.
static uint64_t sResolution;
static uint64_t sResolutionSigDigs;
static const uint16_t kNsPerUs = 1000;
static const uint64_t kNsPerMs = 1000000;
static const uint64_t kNsPerSec = 1000000000;
static const double kNsPerMsd = 1000000.0;
static const double kNsPerSecd = 1000000000.0;
static uint64_t
TimespecToNs(const struct timespec& aTs)
{
uint64_t baseNs = uint64_t(aTs.tv_sec) * kNsPerSec;
return baseNs + uint64_t(aTs.tv_nsec);
}
static uint64_t
ClockTimeNs()
{
struct timespec ts;
// this can't fail: we know &ts is valid, and TimeStamp::Startup()
// checks that CLOCK_MONOTONIC is supported (and aborts if not)
clock_gettime(CLOCK_MONOTONIC, &ts);
// tv_sec is defined to be relative to an arbitrary point in time,
// but it would be madness for that point in time to be earlier than
// the Epoch. So we can safely assume that even if time_t is 32
// bits, tv_sec won't overflow while the browser is open. Revisit
// this argument if we're still building with 32-bit time_t around
// the year 2037.
return TimespecToNs(ts);
}
static uint64_t
ClockResolutionNs()
{
// NB: why not rely on clock_getres()? Two reasons: (i) it might
// lie, and (ii) it might return an "ideal" resolution that while
// theoretically true, could never be measured in practice. Since
// clock_gettime() likely involves a system call on your platform,
// the "actual" timing resolution shouldn't be lower than syscall
// overhead.
uint64_t start = ClockTimeNs();
uint64_t end = ClockTimeNs();
uint64_t minres = (end - start);
// 10 total trials is arbitrary: what we're trying to avoid by
// looping is getting unlucky and being interrupted by a context
// switch or signal, or being bitten by paging/cache effects
for (int i = 0; i < 9; ++i) {
start = ClockTimeNs();
end = ClockTimeNs();
uint64_t candidate = (start - end);
if (candidate < minres) {
minres = candidate;
}
}
if (0 == minres) {
// measurable resolution is either incredibly low, ~1ns, or very
// high. fall back on clock_getres()
struct timespec ts;
if (0 == clock_getres(CLOCK_MONOTONIC, &ts)) {
minres = TimespecToNs(ts);
}
}
if (0 == minres) {
// clock_getres probably failed. fall back on NSPR's resolution
// assumption
minres = 1 * kNsPerMs;
}
return minres;
}
namespace mozilla {
double
Bug 1039924 part 3 - Templatize TimeDuration so it can support different behaviors with regards to tick count arithmetic; r=froydnj This patch prepares the way for having a separate StickyTimeDuration class by factoring TimeDuration into a templated base class: BaseTimeDuration. BaseTimeDuration takes a templated parameter, ValueCalculator, which is a helper object that defines how various arithmetic operations are performed on its mValue member (an int64_t count of ticks). This patch does not actually define or use the ValueCalculator parameter yet but simply performs the renaming and templatization. With regards to the templatization, arithmetic operators are defined to take objects with the same ValueCalculator template parameter (so that we don't, for example, apply non-safe arithmetic to a StickyTimeDuration). However, comparison operators are defined to also operate on objects with a different ValueCalculator template parameter since comparison should be independent of the type of arithmetic used. Likewise, the constructor and assignment operator are defined to operate on objects with a different ValueCalculator template parameter so that objects can be converted from TimeDuration to StickyTimeDuration and vice-versa. The constructor is marked as explicit, however, so that we don't silently convert a StickyTimeDuration to a TimeDuration and unwittingly apply non-safe arithmetic to a StickyTimeDuration. TimeDuration is defined as a specialization of BaseTimeDuration that uses TimeDurationValueCalculator as its ValueCalculator type. TimeDurationValueCalculator is filled-in in a subsequent patch.
2014-09-24 22:25:49 -07:00
BaseTimeDurationPlatformUtils::ToSeconds(int64_t aTicks)
{
return double(aTicks) / kNsPerSecd;
}
double
Bug 1039924 part 3 - Templatize TimeDuration so it can support different behaviors with regards to tick count arithmetic; r=froydnj This patch prepares the way for having a separate StickyTimeDuration class by factoring TimeDuration into a templated base class: BaseTimeDuration. BaseTimeDuration takes a templated parameter, ValueCalculator, which is a helper object that defines how various arithmetic operations are performed on its mValue member (an int64_t count of ticks). This patch does not actually define or use the ValueCalculator parameter yet but simply performs the renaming and templatization. With regards to the templatization, arithmetic operators are defined to take objects with the same ValueCalculator template parameter (so that we don't, for example, apply non-safe arithmetic to a StickyTimeDuration). However, comparison operators are defined to also operate on objects with a different ValueCalculator template parameter since comparison should be independent of the type of arithmetic used. Likewise, the constructor and assignment operator are defined to operate on objects with a different ValueCalculator template parameter so that objects can be converted from TimeDuration to StickyTimeDuration and vice-versa. The constructor is marked as explicit, however, so that we don't silently convert a StickyTimeDuration to a TimeDuration and unwittingly apply non-safe arithmetic to a StickyTimeDuration. TimeDuration is defined as a specialization of BaseTimeDuration that uses TimeDurationValueCalculator as its ValueCalculator type. TimeDurationValueCalculator is filled-in in a subsequent patch.
2014-09-24 22:25:49 -07:00
BaseTimeDurationPlatformUtils::ToSecondsSigDigits(int64_t aTicks)
{
// don't report a value < mResolution ...
int64_t valueSigDigs = sResolution * (aTicks / sResolution);
// and chop off insignificant digits
valueSigDigs = sResolutionSigDigs * (valueSigDigs / sResolutionSigDigs);
return double(valueSigDigs) / kNsPerSecd;
}
int64_t
Bug 1039924 part 3 - Templatize TimeDuration so it can support different behaviors with regards to tick count arithmetic; r=froydnj This patch prepares the way for having a separate StickyTimeDuration class by factoring TimeDuration into a templated base class: BaseTimeDuration. BaseTimeDuration takes a templated parameter, ValueCalculator, which is a helper object that defines how various arithmetic operations are performed on its mValue member (an int64_t count of ticks). This patch does not actually define or use the ValueCalculator parameter yet but simply performs the renaming and templatization. With regards to the templatization, arithmetic operators are defined to take objects with the same ValueCalculator template parameter (so that we don't, for example, apply non-safe arithmetic to a StickyTimeDuration). However, comparison operators are defined to also operate on objects with a different ValueCalculator template parameter since comparison should be independent of the type of arithmetic used. Likewise, the constructor and assignment operator are defined to operate on objects with a different ValueCalculator template parameter so that objects can be converted from TimeDuration to StickyTimeDuration and vice-versa. The constructor is marked as explicit, however, so that we don't silently convert a StickyTimeDuration to a TimeDuration and unwittingly apply non-safe arithmetic to a StickyTimeDuration. TimeDuration is defined as a specialization of BaseTimeDuration that uses TimeDurationValueCalculator as its ValueCalculator type. TimeDurationValueCalculator is filled-in in a subsequent patch.
2014-09-24 22:25:49 -07:00
BaseTimeDurationPlatformUtils::TicksFromMilliseconds(double aMilliseconds)
{
double result = aMilliseconds * kNsPerMsd;
if (result > INT64_MAX) {
return INT64_MAX;
} else if (result < INT64_MIN) {
return INT64_MIN;
}
return result;
}
int64_t
Bug 1039924 part 3 - Templatize TimeDuration so it can support different behaviors with regards to tick count arithmetic; r=froydnj This patch prepares the way for having a separate StickyTimeDuration class by factoring TimeDuration into a templated base class: BaseTimeDuration. BaseTimeDuration takes a templated parameter, ValueCalculator, which is a helper object that defines how various arithmetic operations are performed on its mValue member (an int64_t count of ticks). This patch does not actually define or use the ValueCalculator parameter yet but simply performs the renaming and templatization. With regards to the templatization, arithmetic operators are defined to take objects with the same ValueCalculator template parameter (so that we don't, for example, apply non-safe arithmetic to a StickyTimeDuration). However, comparison operators are defined to also operate on objects with a different ValueCalculator template parameter since comparison should be independent of the type of arithmetic used. Likewise, the constructor and assignment operator are defined to operate on objects with a different ValueCalculator template parameter so that objects can be converted from TimeDuration to StickyTimeDuration and vice-versa. The constructor is marked as explicit, however, so that we don't silently convert a StickyTimeDuration to a TimeDuration and unwittingly apply non-safe arithmetic to a StickyTimeDuration. TimeDuration is defined as a specialization of BaseTimeDuration that uses TimeDurationValueCalculator as its ValueCalculator type. TimeDurationValueCalculator is filled-in in a subsequent patch.
2014-09-24 22:25:49 -07:00
BaseTimeDurationPlatformUtils::ResolutionInTicks()
{
return static_cast<int64_t>(sResolution);
}
static bool gInitialized = false;
nsresult
TimeStamp::Startup()
{
if (gInitialized) {
return NS_OK;
}
struct timespec dummy;
if (clock_gettime(CLOCK_MONOTONIC, &dummy) != 0) {
NS_RUNTIMEABORT("CLOCK_MONOTONIC is absent!");
}
sResolution = ClockResolutionNs();
// find the number of significant digits in sResolution, for the
// sake of ToSecondsSigDigits()
for (sResolutionSigDigs = 1;
!(sResolutionSigDigs == sResolution ||
10 * sResolutionSigDigs > sResolution);
sResolutionSigDigs *= 10);
gInitialized = true;
return NS_OK;
}
void
TimeStamp::Shutdown()
{
}
TimeStamp
TimeStamp::Now(bool aHighResolution)
{
return TimeStamp(ClockTimeNs());
}
#if defined(LINUX) || defined(ANDROID)
// Calculates the amount of jiffies that have elapsed since boot and up to the
// starttime value of a specific process as found in its /proc/*/stat file.
// Returns 0 if an error occurred.
static uint64_t
JiffiesSinceBoot(const char* aFile)
{
char stat[512];
FILE* f = fopen(aFile, "r");
if (!f) {
return 0;
}
int n = fread(&stat, 1, sizeof(stat) - 1, f);
fclose(f);
if (n <= 0) {
return 0;
}
stat[n] = 0;
long long unsigned startTime = 0; // instead of uint64_t to keep GCC quiet
char* s = strrchr(stat, ')');
if (!s) {
return 0;
}
int rv = sscanf(s + 2,
"%*c %*d %*d %*d %*d %*d %*u %*u %*u %*u "
"%*u %*u %*u %*d %*d %*d %*d %*d %*d %llu",
&startTime);
if (rv != 1 || !startTime) {
return 0;
}
return startTime;
}
// Computes the interval that has elapsed between the thread creation and the
// process creation by comparing the starttime fields in the respective
// /proc/*/stat files. The resulting value will be a good approximation of the
// process uptime. This value will be stored at the address pointed by aTime;
// if an error occurred 0 will be stored instead.
static void
ComputeProcessUptimeThread(void* aTime)
{
uint64_t* uptime = static_cast<uint64_t*>(aTime);
long hz = sysconf(_SC_CLK_TCK);
*uptime = 0;
if (!hz) {
return;
}
char threadStat[40];
sprintf(threadStat, "/proc/self/task/%d/stat", (pid_t)syscall(__NR_gettid));
uint64_t threadJiffies = JiffiesSinceBoot(threadStat);
uint64_t selfJiffies = JiffiesSinceBoot("/proc/self/stat");
if (!threadJiffies || !selfJiffies) {
return;
}
*uptime = ((threadJiffies - selfJiffies) * kNsPerSec) / hz;
}
// Computes and returns the process uptime in us on Linux & its derivatives.
// Returns 0 if an error was encountered.
uint64_t
TimeStamp::ComputeProcessUptime()
{
uint64_t uptime = 0;
PRThread* thread = PR_CreateThread(PR_USER_THREAD,
ComputeProcessUptimeThread,
&uptime,
PR_PRIORITY_NORMAL,
PR_GLOBAL_THREAD,
PR_JOINABLE_THREAD,
0);
PR_JoinThread(thread);
return uptime / kNsPerUs;
}
#elif defined(__DragonFly__) || defined(__FreeBSD__) \
|| defined(__NetBSD__) || defined(__OpenBSD__)
// Computes and returns the process uptime in us on various BSD flavors.
// Returns 0 if an error was encountered.
uint64_t
TimeStamp::ComputeProcessUptime()
{
struct timespec ts;
int rv = clock_gettime(CLOCK_REALTIME, &ts);
if (rv == -1) {
return 0;
}
int mib[] = {
CTL_KERN,
KERN_PROC,
KERN_PROC_PID,
getpid(),
#if defined(__NetBSD__) || defined(__OpenBSD__)
sizeof(KINFO_PROC),
1,
#endif
};
u_int mibLen = sizeof(mib) / sizeof(mib[0]);
KINFO_PROC proc;
size_t bufferSize = sizeof(proc);
rv = sysctl(mib, mibLen, &proc, &bufferSize, nullptr, 0);
if (rv == -1) {
return 0;
}
uint64_t startTime = ((uint64_t)proc.KP_START_SEC * kNsPerSec) +
(proc.KP_START_USEC * kNsPerUs);
uint64_t now = ((uint64_t)ts.tv_sec * kNsPerSec) + ts.tv_nsec;
if (startTime > now) {
return 0;
}
return (now - startTime) / kNsPerUs;
}
#else
uint64_t
TimeStamp::ComputeProcessUptime()
{
return 0;
}
#endif
} // namespace mozilla