gecko/xpcom/io/nsIFile.idl

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code, released
 * March 31, 1998.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998-1999
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Doug Turner <dougt@netscape.com>
 *   Christopher Blizzard <blizzard@mozilla.org>
 *   Darin Fisher <darin@netscape.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"

interface nsISimpleEnumerator;

/**
 * This is the only correct cross-platform way to specify a file.
 * Strings are not such a way. If you grew up on windows or unix, you
 * may think they are.  Welcome to reality.
 *
 * All methods with string parameters have two forms.  The preferred
 * form operates on UCS-2 encoded characters strings.  An alternate
 * form operates on characters strings encoded in the "native" charset.
 *
 * A string containing characters encoded in the native charset cannot
 * be safely passed to javascript via xpconnect.  Therefore, the "native
 * methods" are not scriptable. 
 */
[scriptable, uuid(c8c0a080-0868-11d3-915f-d9d889d48e3c)]
interface nsIFile : nsISupports
{
    /**
     *  Create Types
     *
     *  NORMAL_FILE_TYPE - A normal file.
     *  DIRECTORY_TYPE   - A directory/folder.
     */
    const unsigned long NORMAL_FILE_TYPE = 0;
    const unsigned long DIRECTORY_TYPE   = 1;

    /**
     *  append[Native]
     *
     *  This function is used for constructing a descendent of the
     *  current nsIFile.
     *
     *   @param node
     *       A string which is intended to be a child node of the nsIFile.
     *       For the |appendNative| method, the node must be in the native
     *       filesystem charset.
     */
    void append(in AString node);
    [noscript] void appendNative(in ACString node);

    /**
     *  Normalize the pathName (e.g. removing .. and . components on Unix).
     */
    void normalize();

    /**
     *  create
     *
     *  This function will create a new file or directory in the
     *  file system. Any nodes that have not been created or
     *  resolved, will be.  If the file or directory already
     *  exists create() will return NS_ERROR_FILE_ALREADY_EXISTS.
     *
     *   @param type
     *       This specifies the type of file system object
     *       to be made.  The only two types at this time
     *       are file and directory which are defined above.
     *       If the type is unrecongnized, we will return an
     *       error (NS_ERROR_FILE_UNKNOWN_TYPE).
     *
     *   @param permissions
     *       The unix style octal permissions.  This may
     *       be ignored on systems that do not need to do
     *       permissions.
     */
    void create(in unsigned long type, in unsigned long permissions);

    /**
     *  Accessor to the leaf name of the file itself.      
     *  For the |nativeLeafName| method, the nativeLeafName must 
     *  be in the native filesystem charset.
     */
    attribute AString leafName;
    [noscript] attribute ACString nativeLeafName;

    /**
     *  copyTo[Native]
     *
     *  This will copy this file to the specified newParentDir.
     *  If a newName is specified, the file will be renamed.
     *  If 'this' is not created we will return an error
     *  (NS_ERROR_FILE_TARGET_DOES_NOT_EXIST).
     *
     *  copyTo may fail if the file already exists in the destination 
     *  directory.
     *
     *  copyTo will NOT resolve aliases/shortcuts during the copy.
     *
     *   @param newParentDir
     *       This param is the destination directory. If the
     *       newParentDir is null, copyTo() will use the parent
     *       directory of this file. If the newParentDir is not
     *       empty and is not a directory, an error will be
     *       returned (NS_ERROR_FILE_DESTINATION_NOT_DIR). For the 
     *       |CopyToNative| method, the newName must be in the 
     *       native filesystem charset.
     *
     *   @param newName
     *       This param allows you to specify a new name for
     *       the file to be copied. This param may be empty, in
     *       which case the current leaf name will be used.
     */
    void copyTo(in nsIFile newParentDir, in AString newName);
    [noscript] void CopyToNative(in nsIFile newParentDir, in ACString newName);

    /**
     *  copyToFollowingLinks[Native]
     *
     *  This function is identical to copyTo with the exception that,
     *  as the name implies, it follows symbolic links.  The XP_UNIX
     *  implementation always follow symbolic links when copying.  For 
     *  the |CopyToFollowingLinks| method, the newName must be in the 
     *  native filesystem charset.
     */
    void copyToFollowingLinks(in nsIFile newParentDir, in AString newName);
    [noscript] void copyToFollowingLinksNative(in nsIFile newParentDir, in ACString newName);

    /**
     *  moveTo[Native]
     *
     *  A method to move this file or directory to newParentDir.
     *  If a newName is specified, the file or directory will be renamed.
     *  If 'this' is not created we will return an error
     *  (NS_ERROR_FILE_TARGET_DOES_NOT_EXIST).
     *  If 'this' is a file, and the destination file already exists, moveTo
     *  will replace the old file.
     *  This object is updated to refer to the new file.
     *
     *  moveTo will NOT resolve aliases/shortcuts during the copy.
     *  moveTo will do the right thing and allow copies across volumes.
     *  moveTo will return an error (NS_ERROR_FILE_DIR_NOT_EMPTY) if 'this' is
     *  a directory and the destination directory is not empty.
     *  moveTo will return an error (NS_ERROR_FILE_ACCESS_DENIED) if 'this' is
     *  a directory and the destination directory is not writable.
     *
     *   @param newParentDir
     *       This param is the destination directory. If the
     *       newParentDir is empty, moveTo() will rename the file
     *       within its current directory. If the newParentDir is
     *       not empty and does not name a directory, an error will
     *       be returned (NS_ERROR_FILE_DESTINATION_NOT_DIR).  For 
     *       the |moveToNative| method, the newName must be in the 
     *       native filesystem charset.
     *
     *   @param newName
     *       This param allows you to specify a new name for
     *       the file to be moved. This param may be empty, in
     *       which case the current leaf name will be used.
     */
    void moveTo(in nsIFile newParentDir, in AString newName);
    [noscript] void moveToNative(in nsIFile newParentDir, in ACString newName);

    /**
     *  This will try to delete this file.  The 'recursive' flag
     *  must be PR_TRUE to delete directories which are not empty.
     *
     *  This will not resolve any symlinks.
     */
    void remove(in boolean recursive);

    /**
     *  Attributes of nsIFile.
     */

    attribute unsigned long permissions;
    attribute unsigned long permissionsOfLink;

    /**
     *  File Times are to be in milliseconds from
     *  midnight (00:00:00), January 1, 1970 Greenwich Mean
     *  Time (GMT).
     */
    attribute PRInt64 lastModifiedTime;
    attribute PRInt64 lastModifiedTimeOfLink;

    /**
     *  WARNING!  On the Mac, getting/setting the file size with nsIFile
     *  only deals with the size of the data fork.  If you need to
     *  know the size of the combined data and resource forks use the
     *  GetFileSizeWithResFork() method defined on nsILocalFileMac.
     */
    attribute PRInt64 fileSize;
    readonly attribute PRInt64 fileSizeOfLink;

    /**
     *  target & path
     *
     *  Accessor to the string path.  The native version of these
     *  strings are not guaranteed to be a usable path to pass to
     *  NSPR or the C stdlib.  There are problems that affect
     *  platforms on which a path does not fully specify a file
     *  because two volumes can have the same name (e.g., mac).
     *  This is solved by holding "private", native data in the
     *  nsIFile implementation.  This native data is lost when
     *  you convert to a string.
     *
     *      DO NOT PASS TO USE WITH NSPR OR STDLIB!
     *
     *  target
     *      Find out what the symlink points at.  Will give error
     *      (NS_ERROR_FILE_INVALID_PATH) if not a symlink.
     *
     *  path
     *      Find out what the nsIFile points at.
     *
     *  Note that the ACString attributes are returned in the 
     *  native filesystem charset.
     *
     */
    readonly attribute AString target;
    [noscript] readonly attribute ACString nativeTarget;
    readonly attribute AString path;
    [noscript] readonly attribute ACString nativePath;

    boolean exists();
    boolean isWritable();
    boolean isReadable();
    boolean isExecutable();
    boolean isHidden();
    boolean isDirectory();
    boolean isFile();
    boolean isSymlink();
    /**
     * Not a regular file, not a directory, not a symlink.
     */
    boolean isSpecial();

    /**
     *  createUnique
     *  
     *  This function will create a new file or directory in the
     *  file system. Any nodes that have not been created or
     *  resolved, will be.  If this file already exists, we try
     *  variations on the leaf name "suggestedName" until we find
     *  one that did not already exist.
     *
     *  If the search for nonexistent files takes too long
     *  (thousands of the variants already exist), we give up and
     *  return NS_ERROR_FILE_TOO_BIG.
     *
     *   @param type
     *       This specifies the type of file system object
     *       to be made.  The only two types at this time
     *       are file and directory which are defined above.
     *       If the type is unrecongnized, we will return an
     *       error (NS_ERROR_FILE_UNKNOWN_TYPE).
     *
     *   @param permissions
     *       The unix style octal permissions.  This may
     *       be ignored on systems that do not need to do
     *       permissions.
     */
    void createUnique(in unsigned long type, in unsigned long permissions);

    /**
      * clone()
      *
      * This function will allocate and initialize a nsIFile object to the
      * exact location of the |this| nsIFile.
      *
      *   @param file
      *          A nsIFile which this object will be initialize
      *          with.
      *
      */
    nsIFile clone();

    /**
     *  Will determine if the inFile equals this.
     */
    boolean equals(in nsIFile inFile);

    /**
     *  Will determine if inFile is a descendant of this file
     *  If |recur| is true, look in subdirectories too
     */
    boolean contains(in nsIFile inFile, in boolean recur);

    /**
     *  Parent will be null when this is at the top of the volume.
     */
    readonly attribute nsIFile parent;
    
    /**
     *  Returns an enumeration of the elements in a directory. Each
     *  element in the enumeration is an nsIFile.
     *
     *   @return NS_ERROR_FILE_NOT_DIRECTORY if the current nsIFile does
     *           not specify a directory.
     */
    readonly attribute nsISimpleEnumerator directoryEntries;
};

%{C++
#ifdef MOZILLA_INTERNAL_API
#include "nsDirectoryServiceUtils.h"
#endif
%}