gecko/hal/gonk/GonkHal.cpp

597 lines
15 KiB
C++
Raw Normal View History

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set sw=2 ts=8 et ft=cpp : */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this file,
* You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "base/message_loop.h"
#include "hardware_legacy/uevent.h"
#include "Hal.h"
#include "HalImpl.h"
#include "mozilla/dom/battery/Constants.h"
#include "mozilla/FileUtils.h"
#include "nsAlgorithm.h"
#include "nsThreadUtils.h"
#include "mozilla/Monitor.h"
#include "mozilla/Services.h"
#include "mozilla/FileUtils.h"
#include "nsThreadUtils.h"
#include "nsIRunnable.h"
#include "nsIThread.h"
#include "nsIObserver.h"
#include "nsIObserverService.h"
#include "nsXULAppAPI.h"
#include "hardware/lights.h"
#include "hardware/hardware.h"
#include "hardware_legacy/vibrator.h"
#include "UeventPoller.h"
#include <stdio.h>
#include <math.h>
#include <fcntl.h>
#include <errno.h>
#include <time.h>
#include <sys/syscall.h>
#include <cutils/properties.h>
#include <android/log.h>
#define LOG(args...) __android_log_print(ANDROID_LOG_INFO, "Gonk", args)
#define NsecPerMsec 1000000
#define NsecPerSec 1000000000
using mozilla::hal::WindowIdentifier;
namespace mozilla {
namespace hal_impl {
namespace {
/**
* This runnable runs for the lifetime of the program, once started. It's
* responsible for "playing" vibration patterns.
*/
class VibratorRunnable
: public nsIRunnable
, public nsIObserver
{
public:
VibratorRunnable()
: mMonitor("VibratorRunnable")
, mIndex(0)
, mShuttingDown(false)
{
nsCOMPtr<nsIObserverService> os = services::GetObserverService();
if (!os) {
NS_WARNING("Could not get observer service!");
return;
}
os->AddObserver(this, NS_XPCOM_SHUTDOWN_OBSERVER_ID, /* weak ref */ true);
}
NS_DECL_ISUPPORTS
NS_DECL_NSIRUNNABLE
NS_DECL_NSIOBSERVER
// Run on the main thread, not the vibrator thread.
void Vibrate(const nsTArray<uint32> &pattern);
void CancelVibrate();
private:
Monitor mMonitor;
// The currently-playing pattern.
nsTArray<uint32> mPattern;
// The index we're at in the currently-playing pattern. If mIndex >=
// mPattern.Length(), then we're not currently playing anything.
uint32 mIndex;
// Set to true in our shutdown observer. When this is true, we kill the
// vibrator thread.
bool mShuttingDown;
};
NS_IMPL_ISUPPORTS2(VibratorRunnable, nsIRunnable, nsIObserver);
NS_IMETHODIMP
VibratorRunnable::Run()
{
MonitorAutoLock lock(mMonitor);
// We currently assume that mMonitor.Wait(X) waits for X milliseconds. But in
// reality, the kernel might not switch to this thread for some time after the
// wait expires. So there's potential for some inaccuracy here.
//
// This doesn't worry me too much. Note that we don't even start vibrating
// immediately when VibratorRunnable::Vibrate is called -- we go through a
// condvar onto another thread. Better just to be chill about small errors in
// the timing here.
while (!mShuttingDown) {
if (mIndex < mPattern.Length()) {
uint32 duration = mPattern[mIndex];
if (mIndex % 2 == 0) {
vibrator_on(duration);
}
mIndex++;
mMonitor.Wait(PR_MillisecondsToInterval(duration));
}
else {
mMonitor.Wait();
}
}
return NS_OK;
}
NS_IMETHODIMP
VibratorRunnable::Observe(nsISupports *subject, const char *topic,
const PRUnichar *data)
{
MOZ_ASSERT(strcmp(topic, NS_XPCOM_SHUTDOWN_OBSERVER_ID) == 0);
MonitorAutoLock lock(mMonitor);
mShuttingDown = true;
mMonitor.Notify();
return NS_OK;
}
void
VibratorRunnable::Vibrate(const nsTArray<uint32> &pattern)
{
MonitorAutoLock lock(mMonitor);
mPattern = pattern;
mIndex = 0;
mMonitor.Notify();
}
void
VibratorRunnable::CancelVibrate()
{
MonitorAutoLock lock(mMonitor);
mPattern.Clear();
mPattern.AppendElement(0);
mIndex = 0;
mMonitor.Notify();
}
VibratorRunnable *sVibratorRunnable = NULL;
void
EnsureVibratorThreadInitialized()
{
if (sVibratorRunnable) {
return;
}
nsRefPtr<VibratorRunnable> runnable = new VibratorRunnable();
sVibratorRunnable = runnable;
nsCOMPtr<nsIThread> thread;
NS_NewThread(getter_AddRefs(thread), sVibratorRunnable);
}
} // anonymous namespace
void
Vibrate(const nsTArray<uint32> &pattern, const hal::WindowIdentifier &)
{
EnsureVibratorThreadInitialized();
sVibratorRunnable->Vibrate(pattern);
}
void
CancelVibrate(const hal::WindowIdentifier &)
{
EnsureVibratorThreadInitialized();
sVibratorRunnable->CancelVibrate();
}
namespace {
class BatteryUpdater : public nsRunnable {
public:
NS_IMETHOD Run()
{
hal::BatteryInformation info;
hal_impl::GetCurrentBatteryInformation(&info);
hal::NotifyBatteryChange(info);
return NS_OK;
}
};
} // anonymous namespace
class BatteryObserver : public IUeventObserver,
public RefCounted<BatteryObserver>
{
public:
BatteryObserver()
:mUpdater(new BatteryUpdater())
{
}
virtual void Notify(const NetlinkEvent &aEvent)
{
// this will run on IO thread
NetlinkEvent *event = const_cast<NetlinkEvent*>(&aEvent);
const char *subsystem = event->getSubsystem();
// e.g. DEVPATH=/devices/platform/sec-battery/power_supply/battery
const char *devpath = event->findParam("DEVPATH");
if (strcmp(subsystem, "power_supply") == 0 &&
strstr(devpath, "battery")) {
// aEvent will be valid only in this method.
NS_DispatchToMainThread(mUpdater);
}
}
private:
nsRefPtr<BatteryUpdater> mUpdater;
};
// sBatteryObserver is owned by the IO thread. Only the IO thread may
// create or destroy it.
static BatteryObserver *sBatteryObserver = NULL;
static void
RegisterBatteryObserverIOThread()
{
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(!sBatteryObserver);
sBatteryObserver = new BatteryObserver();
RegisterUeventListener(sBatteryObserver);
}
void
EnableBatteryNotifications()
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(RegisterBatteryObserverIOThread));
}
static void
UnregisterBatteryObserverIOThread()
{
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(sBatteryObserver);
UnregisterUeventListener(sBatteryObserver);
delete sBatteryObserver;
sBatteryObserver = NULL;
}
void
DisableBatteryNotifications()
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(UnregisterBatteryObserverIOThread));
}
void
GetCurrentBatteryInformation(hal::BatteryInformation *aBatteryInfo)
{
static const int BATTERY_NOT_CHARGING = 0;
static const int BATTERY_CHARGING_USB = 1;
static const int BATTERY_CHARGING_AC = 2;
FILE *capacityFile = fopen("/sys/class/power_supply/battery/capacity", "r");
double capacity = dom::battery::kDefaultLevel * 100;
if (capacityFile) {
fscanf(capacityFile, "%lf", &capacity);
fclose(capacityFile);
}
FILE *chargingFile = fopen("/sys/class/power_supply/battery/charging_source", "r");
int chargingSrc = BATTERY_CHARGING_USB;
bool done = false;
if (chargingFile) {
fscanf(chargingFile, "%d", &chargingSrc);
fclose(chargingFile);
done = true;
}
if (!done) {
// toro devices support
chargingFile = fopen("/sys/class/power_supply/battery/status", "r");
if (chargingFile) {
char status[16];
fscanf(chargingFile, "%s", &status);
if (!strcmp(status, "Charging") || !strcmp(status, "Full")) {
// no way here to know if we're charging from USB or AC.
chargingSrc = BATTERY_CHARGING_USB;
} else {
chargingSrc = BATTERY_NOT_CHARGING;
}
fclose(chargingFile);
done = true;
}
}
#ifdef DEBUG
if (chargingSrc != BATTERY_NOT_CHARGING &&
chargingSrc != BATTERY_CHARGING_USB &&
chargingSrc != BATTERY_CHARGING_AC) {
HAL_LOG(("charging_source contained unknown value: %d", chargingSrc));
}
#endif
aBatteryInfo->level() = capacity / 100;
aBatteryInfo->charging() = (chargingSrc == BATTERY_CHARGING_USB ||
chargingSrc == BATTERY_CHARGING_AC);
aBatteryInfo->remainingTime() = dom::battery::kUnknownRemainingTime;
}
namespace {
/**
* RAII class to help us remember to close file descriptors.
*/
const char *screenEnabledFilename = "/sys/power/state";
const char *wakeLockFilename = "/sys/power/wake_lock";
const char *wakeUnlockFilename = "/sys/power/wake_unlock";
template<ssize_t n>
bool ReadFromFile(const char *filename, char (&buf)[n])
{
int fd = open(filename, O_RDONLY);
ScopedClose autoClose(fd);
if (fd < 0) {
HAL_LOG(("Unable to open file %s.", filename));
return false;
}
ssize_t numRead = read(fd, buf, n);
if (numRead < 0) {
HAL_LOG(("Error reading from file %s.", filename));
return false;
}
buf[PR_MIN(numRead, n - 1)] = '\0';
return true;
}
void WriteToFile(const char *filename, const char *toWrite)
{
int fd = open(filename, O_WRONLY);
ScopedClose autoClose(fd);
if (fd < 0) {
HAL_LOG(("Unable to open file %s.", filename));
return;
}
if (write(fd, toWrite, strlen(toWrite)) < 0) {
HAL_LOG(("Unable to write to file %s.", filename));
return;
}
}
// We can write to screenEnabledFilename to enable/disable the screen, but when
// we read, we always get "mem"! So we have to keep track ourselves whether
// the screen is on or not.
bool sScreenEnabled = true;
// We can read wakeLockFilename to find out whether the cpu wake lock
// is already acquired, but reading and parsing it is a lot more work
// than tracking it ourselves, and it won't be accurate anyway (kernel
// internal wake locks aren't counted here.)
bool sCpuSleepAllowed = true;
} // anonymous namespace
bool
GetScreenEnabled()
{
return sScreenEnabled;
}
void
SetScreenEnabled(bool enabled)
{
WriteToFile(screenEnabledFilename, enabled ? "on" : "mem");
sScreenEnabled = enabled;
}
double
GetScreenBrightness()
{
hal::LightConfiguration aConfig;
hal::LightType light = hal::eHalLightID_Backlight;
hal::GetLight(light, &aConfig);
// backlight is brightness only, so using one of the RGB elements as value.
int brightness = aConfig.color() & 0xFF;
return brightness / 255.0;
}
void
SetScreenBrightness(double brightness)
{
// Don't use De Morgan's law to push the ! into this expression; we want to
// catch NaN too.
if (!(0 <= brightness && brightness <= 1)) {
HAL_LOG(("SetScreenBrightness: Dropping illegal brightness %f.",
brightness));
return;
}
// Convert the value in [0, 1] to an int between 0 and 255 and convert to a color
// note that the high byte is FF, corresponding to the alpha channel.
int val = static_cast<int>(round(brightness * 255));
uint32_t color = (0xff<<24) + (val<<16) + (val<<8) + val;
hal::LightConfiguration aConfig;
aConfig.mode() = hal::eHalLightMode_User;
aConfig.flash() = hal::eHalLightFlash_None;
aConfig.flashOnMS() = aConfig.flashOffMS() = 0;
aConfig.color() = color;
hal::SetLight(hal::eHalLightID_Backlight, aConfig);
hal::SetLight(hal::eHalLightID_Buttons, aConfig);
}
bool
GetCpuSleepAllowed()
{
return sCpuSleepAllowed;
}
void
SetCpuSleepAllowed(bool aAllowed)
{
WriteToFile(aAllowed ? wakeUnlockFilename : wakeLockFilename, "gecko");
sCpuSleepAllowed = aAllowed;
}
static light_device_t* sLights[hal::eHalLightID_Count]; // will be initialized to NULL
light_device_t* GetDevice(hw_module_t* module, char const* name)
{
int err;
hw_device_t* device;
err = module->methods->open(module, name, &device);
if (err == 0) {
return (light_device_t*)device;
} else {
return NULL;
}
}
void
InitLights()
{
// assume that if backlight is NULL, nothing has been set yet
// if this is not true, the initialization will occur everytime a light is read or set!
if (!sLights[hal::eHalLightID_Backlight]) {
int err;
hw_module_t* module;
err = hw_get_module(LIGHTS_HARDWARE_MODULE_ID, (hw_module_t const**)&module);
if (err == 0) {
sLights[hal::eHalLightID_Backlight]
= GetDevice(module, LIGHT_ID_BACKLIGHT);
sLights[hal::eHalLightID_Keyboard]
= GetDevice(module, LIGHT_ID_KEYBOARD);
sLights[hal::eHalLightID_Buttons]
= GetDevice(module, LIGHT_ID_BUTTONS);
sLights[hal::eHalLightID_Battery]
= GetDevice(module, LIGHT_ID_BATTERY);
sLights[hal::eHalLightID_Notifications]
= GetDevice(module, LIGHT_ID_NOTIFICATIONS);
sLights[hal::eHalLightID_Attention]
= GetDevice(module, LIGHT_ID_ATTENTION);
sLights[hal::eHalLightID_Bluetooth]
= GetDevice(module, LIGHT_ID_BLUETOOTH);
sLights[hal::eHalLightID_Wifi]
= GetDevice(module, LIGHT_ID_WIFI);
}
}
}
/**
* The state last set for the lights until liblights supports
* getting the light state.
*/
static light_state_t sStoredLightState[hal::eHalLightID_Count];
bool
SetLight(hal::LightType light, const hal::LightConfiguration& aConfig)
{
light_state_t state;
InitLights();
if (light < 0 || light >= hal::eHalLightID_Count || sLights[light] == NULL) {
return false;
}
memset(&state, 0, sizeof(light_state_t));
state.color = aConfig.color();
state.flashMode = aConfig.flash();
state.flashOnMS = aConfig.flashOnMS();
state.flashOffMS = aConfig.flashOffMS();
state.brightnessMode = aConfig.mode();
sLights[light]->set_light(sLights[light], &state);
sStoredLightState[light] = state;
return true;
}
bool
GetLight(hal::LightType light, hal::LightConfiguration* aConfig)
{
light_state_t state;
#ifdef HAVEGETLIGHT
InitLights();
#endif
if (light < 0 || light >= hal::eHalLightID_Count || sLights[light] == NULL) {
return false;
}
memset(&state, 0, sizeof(light_state_t));
#ifdef HAVEGETLIGHT
sLights[light]->get_light(sLights[light], &state);
#else
state = sStoredLightState[light];
#endif
aConfig->light() = light;
aConfig->color() = state.color;
aConfig->flash() = hal::FlashMode(state.flashMode);
aConfig->flashOnMS() = state.flashOnMS;
aConfig->flashOffMS() = state.flashOffMS;
aConfig->mode() = hal::LightMode(state.brightnessMode);
return true;
}
/**
* clock_settime() is not exposed through bionic.
* we define the new function to set system time.
* The result is the same as using clock_settime() system call.
*/
static int
sys_clock_settime(clockid_t clk_id, const struct timespec *tp)
{
return syscall(__NR_clock_settime, clk_id, tp);
}
void
AdjustSystemClock(int32_t aDeltaMilliseconds)
{
struct timespec now;
// Preventing context switch before setting system clock
sched_yield();
clock_gettime(CLOCK_REALTIME, &now);
now.tv_sec += aDeltaMilliseconds/1000;
now.tv_nsec += (aDeltaMilliseconds%1000)*NsecPerMsec;
if (now.tv_nsec >= NsecPerSec)
{
now.tv_sec += 1;
now.tv_nsec -= NsecPerSec;
}
if (now.tv_nsec < 0)
{
now.tv_nsec += NsecPerSec;
now.tv_sec -= 1;
}
// we need to have root privilege.
sys_clock_settime(CLOCK_REALTIME, &now);
}
void
SetTimezone(const nsCString& aTimezoneSpec)
{
property_set("persist.sys.timezone", aTimezoneSpec.get());
// this function is automatically called by the other time conversion
// functions that depend on the timezone. To be safe, we call it manually.
tzset();
}
} // hal_impl
} // mozilla