gecko/build/profile_pageloader.pl

212 lines
6.5 KiB
Perl
Raw Normal View History

#!/usr/bin/perl
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Mozilla Browser code.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 2002
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Chris Mcafee <mcafee@netscape.com>
# Brian Ryner <bryner@brianryner.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
use Cwd;
use File::Find ();
use POSIX qw(sys_wait_h);
sub kill_process {
my ($target_pid) = @_;
my $start_time = time;
# Try to kill and wait 10 seconds, then try a kill -9
my $sig;
for $sig ('TERM', 'KILL') {
print "kill $sig $target_pid\n";
kill $sig => $target_pid;
my $interval_start = time;
while (time - $interval_start < 10) {
# the following will work with 'cygwin' perl on win32, but not
# with 'MSWin32' (ActiveState) perl
my $pid = waitpid($target_pid, POSIX::WNOHANG());
if (($pid == $target_pid and POSIX::WIFEXITED($?)) or $pid == -1) {
my $secs = time - $start_time;
$secs = $secs == 1 ? '1 second' : "$secs seconds";
print "Process killed. Took $secs to die.\n";
return;
}
sleep 1;
}
}
die "Unable to kill process: $target_pid";
}
# Stripped down version of fork_and_log().
sub system_fork_and_log {
# Fork a sub process and log the output.
my ($cmd) = @_;
my $pid = fork; # Fork off a child process.
unless ($pid) { # child
exec { $cmd->[0] } @$cmd;
die "Could not exec()";
}
return $pid;
}
sub wait_for_pid {
# Wait for a process to exit or kill it if it takes too long.
my ($pid, $timeout_secs) = @_;
my ($exit_value, $signal_num, $dumped_core, $timed_out) = (0,0,0,0);
my $sig_name;
my $loop_count;
die ("Invalid timeout value passed to wait_for_pid()\n")
if ($timeout_secs <= 0);
eval {
$loop_count = 0;
while (++$loop_count < $timeout_secs) {
my $wait_pid = waitpid($pid, POSIX::WNOHANG());
# the following will work with 'cygwin' perl on win32, but not
# with 'MSWin32' (ActiveState) perl
last if ($wait_pid == $pid and POSIX::WIFEXITED($?)) or $wait_pid == -1;
sleep 1;
}
$exit_value = $? >> 8;
$signal_num = $? >> 127;
$dumped_core = $? & 128;
if ($loop_count >= $timeout_secs) {
die "timeout";
}
return "done";
};
if ($@) {
if ($@ =~ /timeout/) {
kill_process($pid);
$timed_out = 1;
} else { # Died for some other reason.
die; # Propagate the error up.
}
}
# $sig_name = $signal_num ? signal_name($signal_num) : '';
#
# return { timed_out=>$timed_out,
# exit_value=>$exit_value,
# sig_name=>$sig_name,
# dumped_core=>$dumped_core };
}
# System version of run_cmd().
sub run_system_cmd {
my ($cmd, $timeout_secs) = @_;
# print_log "cmd = $cmd\n";
my $pid = system_fork_and_log($cmd);
my $result = wait_for_pid($pid, $timeout_secs);
return $result;
}
#
# Given profile directory, find pref file hidden in salt directory.
# profile $Settings::MozProfileName must exist before calling this sub.
#
sub find_pref_file {
my $profile_dir = shift;
# default to *nix
my $pref_file = "prefs.js";
unless (-e $profile_dir) {
return; # empty list
}
my $found = undef;
my $sub = sub {$pref_file = $File::Find::name, $found++ if $pref_file eq $_};
File::Find::find($sub, $profile_dir);
unless ($found) {
return; # empty list
}
return $pref_file;
}
my $topdir = cwd();
chdir $ENV{OBJDIR};
my $app_name = `grep "MOZ_APP_NAME " config/autoconf.mk | sed "s/.*= //"`;
chomp($app_name);
# On mac, the app directory is the product name with the first
# letter capitalized
my $toolkit = `grep "MOZ_WIDGET_TOOLKIT " config/autoconf.mk |sed "s/.*= //"`;
chomp($toolkit);
if ($toolkit =~ /(mac|cocoa)/) {
my $app_dir = uc(substr($app_name, 0, 1)).substr($app_name, 1);
chdir "dist/$app_dir.app/Contents/MacOS";
} else {
chdir "dist/bin";
}
my $bin_suffix = "";
if ($toolkit =~ /(windows|os2)/) {
$bin_suffix = ".exe";
}
my $old_home = $ENV{HOME};
$ENV{HOME} = cwd();
# Create a profile to test with.
run_system_cmd(["./".$app_name.$bin_suffix, "-createProfile", "testprofile"], 45);
my $pref_file = find_pref_file(".mozilla/".$app_name);
open PREFS, ">>$pref_file";
# Add allow_scripts_to_close_windows; this lets us cleanly exit.
print PREFS "user_pref(\"dom.allow_scripts_to_close_windows\", true);\n";
# Suppress the default browser dialog since it keeps the test from starting.
print PREFS "user_pref(\"browser.shell.checkDefaultBrowser\", false);\n";
close PREFS;
# Run the pageload test.
run_system_cmd(["./".$app_name.$bin_suffix, $ENV{PAGELOAD_URL}."/loader.pl?maxcyc=2&delay=500&nocache=0&timeout=30000&auto=1"], 240);
# Start up again; this will gather data for reading global history and
# reading the fastload file.
run_system_cmd(["./".$app_name.$bin_suffix, "file://$topdir/build/profile_pageloader.html"], 45);
chdir $topdir;