gecko/widget/src/gtk2/nsDeviceContextSpecG.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Roland Mainz <roland.mainz@informatik.med.uni-giessen.de>
 *   Ken Herron <kherron+mozilla@fmailbox.com>
 *   Julien Lafon <julien.lafon@gmail.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */
 
/* Store per-printer features in temp. prefs vars that the
 * print dialog can pick them up... */
#define SET_PRINTER_FEATURES_VIA_PREFS 1 
#define PRINTERFEATURES_PREF "print.tmp.printerfeatures"

#ifdef MOZ_LOGGING
#define FORCE_PR_LOG 1 /* Allow logging in the release build */
#endif /* MOZ_LOGGING */
#include "prlog.h"

#include "plstr.h"

#include "nsDeviceContextSpecG.h"

#include "nsIPrefService.h"
#include "nsIPrefBranch.h"
#include "prenv.h" /* for PR_GetEnv */

#include "nsPrintfCString.h"
#include "nsReadableUtils.h"
#include "nsStringEnumerator.h"
#include "nsIServiceManager.h" 

#ifdef USE_POSTSCRIPT
#include "nsPSPrinters.h"
#include "nsPaperPS.h"  /* Paper size list */
#endif /* USE_POSTSCRIPT */

#include "nsPrintJobFactoryGTK.h"

#include "nsIFileStreams.h"
#include "nsILocalFile.h"

/* Ensure that the result is always equal to either PR_TRUE or PR_FALSE */
#define MAKE_PR_BOOL(val) ((val)?(PR_TRUE):(PR_FALSE))

#ifdef PR_LOGGING 
static PRLogModuleInfo *DeviceContextSpecGTKLM = PR_NewLogModule("DeviceContextSpecGTK");
#endif /* PR_LOGGING */
/* Macro to make lines shorter */
#define DO_PR_DEBUG_LOG(x) PR_LOG(DeviceContextSpecGTKLM, PR_LOG_DEBUG, x)

//----------------------------------------------------------------------------------
// The printer data is shared between the PrinterEnumerator and the nsDeviceContextSpecGTK
// The PrinterEnumerator creates the printer info
// but the nsDeviceContextSpecGTK cleans it up
// If it gets created (via the Page Setup Dialog) but the user never prints anything
// then it will never be delete, so this class takes care of that.
class GlobalPrinters {
public:
  static GlobalPrinters* GetInstance()   { return &mGlobalPrinters; }
  ~GlobalPrinters()                      { FreeGlobalPrinters(); }

  void      FreeGlobalPrinters();
  nsresult  InitializeGlobalPrinters();

  PRBool    PrintersAreAllocated()       { return mGlobalPrinterList != nsnull; }
  PRInt32   GetNumPrinters()
    { return mGlobalPrinterList ? mGlobalPrinterList->Count() : 0; }
  nsString* GetStringAt(PRInt32 aInx)    { return mGlobalPrinterList->StringAt(aInx); }
  void      GetDefaultPrinterName(PRUnichar **aDefaultPrinterName);

protected:
  GlobalPrinters() {}

  static GlobalPrinters mGlobalPrinters;
  static nsStringArray* mGlobalPrinterList;
};

#ifdef SET_PRINTER_FEATURES_VIA_PREFS
/* "Prototype" for the new nsPrinterFeatures service */
class nsPrinterFeatures {
public:
  nsPrinterFeatures( const char *printername );
  ~nsPrinterFeatures() {}

  /* Does this printer allow to set/change the paper size ? */
  void SetCanChangePaperSize( PRBool aCanSetPaperSize );
  /* Does this Mozilla print module allow set/change the paper size ? */
  void SetSupportsPaperSizeChange( PRBool aSupportsPaperSizeChange );
  /* Set number of paper size records and the records itself */
  void SetNumPaperSizeRecords( PRInt32 aCount );
  void SetPaperRecord( PRInt32 aIndex, const char *aName, PRInt32 aWidthMM, PRInt32 aHeightMM, PRBool aIsInch );

  /* Does this printer allow to set/change the content orientation ? */
  void SetCanChangeOrientation( PRBool aCanSetOrientation );
  /* Does this Mozilla print module allow set/change the content orientation ? */
  void SetSupportsOrientationChange( PRBool aSupportsOrientationChange );
  /* Set number of orientation records and the records itself */
  void SetNumOrientationRecords( PRInt32 aCount );
  void SetOrientationRecord( PRInt32 aIndex, const char *aName );

  /* Does this printer allow to set/change the plex mode ? */
  void SetCanChangePlex( PRBool aCanSetPlex );
  /* Does this Mozilla print module allow set/change the plex mode ? */
  void SetSupportsPlexChange( PRBool aSupportsPlexChange );
  /* Set number of plex records and the records itself */
  void SetNumPlexRecords( PRInt32 aCount );
  void SetPlexRecord( PRInt32 aIndex, const char *aName );

  /* Does this printer allow to set/change the resolution name ? */
  void SetCanChangeResolutionName( PRBool aCanSetResolutionName );
  /* Does this Mozilla print module allow set/change the resolution name ? */
  void SetSupportsResolutionNameChange( PRBool aSupportsResolutionChange );
  /* Set number of resolution records and the records itself */
  void SetNumResolutionNameRecords( PRInt32 aCount );
  void SetResolutionNameRecord( PRInt32 aIndex, const char *aName );

  /* Does this printer allow to set/change the colorspace ? */
  void SetCanChangeColorspace( PRBool aCanSetColorspace );
  /* Does this Mozilla print module allow set/change the colorspace ? */
  void SetSupportsColorspaceChange( PRBool aSupportsColorspace );
  /* Set number of colorspace records and the records itself */
  void SetNumColorspaceRecords( PRInt32 aCount );
  void SetColorspaceRecord( PRInt32 aIndex, const char *aName );

  /* Does this device allow to set/change the usage of the internal grayscale mode ? */
  void SetCanChangePrintInColor( PRBool aCanSetPrintInColor );
  /* Does this printer allow to set/change the usage of the internal grayscale mode ? */
  void SetSupportsPrintInColorChange( PRBool aSupportPrintInColorChange );

  /* Does this device allow to set/change the usage of font download to the printer? */
  void SetCanChangeDownloadFonts( PRBool aCanSetDownloadFonts );
  /* Does this printer allow to set/change the usage of font download to the printer? */
  void SetSupportsDownloadFontsChange( PRBool aSupportDownloadFontsChange );

  /* Does this device allow to set/change the job title ? */
  void SetCanChangeJobTitle( PRBool aCanSetJobTitle );
  /* Does this printer allow to set/change the job title ? */
  void SetSupportsJobTitleChange( PRBool aSupportJobTitleChange );
    
  /* Does this device allow to set/change the spooler command ? */
  void SetCanChangeSpoolerCommand( PRBool aCanSetSpoolerCommand );
  /* Does this printer allow to set/change the spooler command ? */
  void SetSupportsSpoolerCommandChange( PRBool aSupportSpoolerCommandChange );
  
  /* Does this device allow to set/change number of copies for an document ? */
  void SetCanChangeNumCopies( PRBool aCanSetNumCopies );

  /* Does this device allow multiple devicecontext instances to be used in
   * parallel (e.g. print while the device is already in use by print-preview
   * or printing while another print job is in progress) ? */
  void SetMultipleConcurrentDeviceContextsSupported( PRBool aCanUseMultipleInstances );
  
private:
  /* private helper methods */
  void SetBoolValue( const char *tagname, PRBool value );
  void SetIntValue(  const char *tagname, PRInt32 value );
  void SetCharValue(  const char *tagname, const char *value );

  nsXPIDLCString          mPrinterName;
  nsCOMPtr<nsIPrefBranch> mPrefs;
};

void nsPrinterFeatures::SetBoolValue( const char *tagname, PRBool value )
{
  mPrefs->SetBoolPref(nsPrintfCString(256, PRINTERFEATURES_PREF ".%s.%s", mPrinterName.get(), tagname).get(), value);
}

void nsPrinterFeatures::SetIntValue(  const char *tagname, PRInt32 value )
{
  mPrefs->SetIntPref(nsPrintfCString(256, PRINTERFEATURES_PREF ".%s.%s", mPrinterName.get(), tagname).get(), value);
}

void nsPrinterFeatures::SetCharValue(  const char *tagname, const char *value )
{
  mPrefs->SetCharPref(nsPrintfCString(256, PRINTERFEATURES_PREF ".%s.%s", mPrinterName.get(), tagname).get(), value);
}

nsPrinterFeatures::nsPrinterFeatures( const char *printername )
{
  DO_PR_DEBUG_LOG(("nsPrinterFeatures::nsPrinterFeatures('%s')\n", printername));
  mPrinterName.Assign(printername);
  mPrefs = do_GetService(NS_PREFSERVICE_CONTRACTID);
 
  SetBoolValue("has_special_printerfeatures", PR_TRUE);
}

void nsPrinterFeatures::SetCanChangePaperSize( PRBool aCanSetPaperSize )
{
  SetBoolValue("can_change_paper_size", aCanSetPaperSize);
}

void nsPrinterFeatures::SetSupportsPaperSizeChange( PRBool aSupportsPaperSizeChange )
{
  SetBoolValue("supports_paper_size_change", aSupportsPaperSizeChange);
}

/* Set number of paper size records and the records itself */
void nsPrinterFeatures::SetNumPaperSizeRecords( PRInt32 aCount )
{
  SetIntValue("paper.count", aCount);          
}

void nsPrinterFeatures::SetPaperRecord(PRInt32 aIndex, const char *aPaperName, PRInt32 aWidthMM, PRInt32 aHeightMM, PRBool aIsInch)
{
  SetCharValue(nsPrintfCString(256, "paper.%d.name",      aIndex).get(), aPaperName);
  SetIntValue( nsPrintfCString(256, "paper.%d.width_mm",  aIndex).get(), aWidthMM);
  SetIntValue( nsPrintfCString(256, "paper.%d.height_mm", aIndex).get(), aHeightMM);
  SetBoolValue(nsPrintfCString(256, "paper.%d.is_inch",   aIndex).get(), aIsInch);
}

void nsPrinterFeatures::SetCanChangeOrientation( PRBool aCanSetOrientation )
{
  SetBoolValue("can_change_orientation", aCanSetOrientation);
}

void nsPrinterFeatures::SetSupportsOrientationChange( PRBool aSupportsOrientationChange )
{
  SetBoolValue("supports_orientation_change", aSupportsOrientationChange);
}

void nsPrinterFeatures::SetNumOrientationRecords( PRInt32 aCount )
{
  SetIntValue("orientation.count", aCount);          
}

void nsPrinterFeatures::SetOrientationRecord( PRInt32 aIndex, const char *aOrientationName )
{
  SetCharValue(nsPrintfCString(256, "orientation.%d.name", aIndex).get(), aOrientationName);
}

void nsPrinterFeatures::SetCanChangePlex( PRBool aCanSetPlex )
{
  SetBoolValue("can_change_plex", aCanSetPlex);
}

void nsPrinterFeatures::SetSupportsPlexChange( PRBool aSupportsPlexChange )
{
  SetBoolValue("supports_plex_change", aSupportsPlexChange);
}

void nsPrinterFeatures::SetNumPlexRecords( PRInt32 aCount )
{
  SetIntValue("plex.count", aCount);          
}

void nsPrinterFeatures::SetPlexRecord( PRInt32 aIndex, const char *aPlexName )
{
  SetCharValue(nsPrintfCString(256, "plex.%d.name", aIndex).get(), aPlexName);
}

void nsPrinterFeatures::SetCanChangeResolutionName( PRBool aCanSetResolutionName )
{
  SetBoolValue("can_change_resolution", aCanSetResolutionName);
}

void nsPrinterFeatures::SetSupportsResolutionNameChange( PRBool aSupportsResolutionNameChange )
{
  SetBoolValue("supports_resolution_change", aSupportsResolutionNameChange);
}

void nsPrinterFeatures::SetNumResolutionNameRecords( PRInt32 aCount )
{
  SetIntValue("resolution.count", aCount);          
}

void nsPrinterFeatures::SetResolutionNameRecord( PRInt32 aIndex, const char *aResolutionName )
{
  SetCharValue(nsPrintfCString(256, "resolution.%d.name", aIndex).get(), aResolutionName);
}

void nsPrinterFeatures::SetCanChangeColorspace( PRBool aCanSetColorspace )
{
  SetBoolValue("can_change_colorspace", aCanSetColorspace);
}

void nsPrinterFeatures::SetSupportsColorspaceChange( PRBool aSupportsColorspaceChange )
{
  SetBoolValue("supports_colorspace_change", aSupportsColorspaceChange);
}

void nsPrinterFeatures::SetNumColorspaceRecords( PRInt32 aCount )
{
  SetIntValue("colorspace.count", aCount);          
}

void nsPrinterFeatures::SetColorspaceRecord( PRInt32 aIndex, const char *aColorspace )
{
  SetCharValue(nsPrintfCString(256, "colorspace.%d.name", aIndex).get(), aColorspace);
}

void nsPrinterFeatures::SetCanChangeDownloadFonts( PRBool aCanSetDownloadFonts )
{
  SetBoolValue("can_change_downloadfonts", aCanSetDownloadFonts);
}

void nsPrinterFeatures::SetSupportsDownloadFontsChange( PRBool aSupportDownloadFontsChange )
{
  SetBoolValue("supports_downloadfonts_change", aSupportDownloadFontsChange);
}

void nsPrinterFeatures::SetCanChangePrintInColor( PRBool aCanSetPrintInColor )
{
  SetBoolValue("can_change_printincolor", aCanSetPrintInColor);
}

void nsPrinterFeatures::SetSupportsPrintInColorChange( PRBool aSupportPrintInColorChange )
{
  SetBoolValue("supports_printincolor_change", aSupportPrintInColorChange);
}

void nsPrinterFeatures::SetCanChangeSpoolerCommand( PRBool aCanSetSpoolerCommand )
{
  SetBoolValue("can_change_spoolercommand", aCanSetSpoolerCommand);
}

void nsPrinterFeatures::SetSupportsSpoolerCommandChange( PRBool aSupportSpoolerCommandChange )
{
  SetBoolValue("supports_spoolercommand_change", aSupportSpoolerCommandChange);
}

void nsPrinterFeatures::SetCanChangeJobTitle( PRBool aCanSetJobTitle )
{
  SetBoolValue("can_change_jobtitle", aCanSetJobTitle);
}

void nsPrinterFeatures::SetSupportsJobTitleChange( PRBool aSupportsJobTitle )
{
  SetBoolValue("supports_jobtitle_change", aSupportsJobTitle);
}

void nsPrinterFeatures::SetCanChangeNumCopies( PRBool aCanSetNumCopies )
{
  SetBoolValue("can_change_num_copies", aCanSetNumCopies);
}

void nsPrinterFeatures::SetMultipleConcurrentDeviceContextsSupported( PRBool aCanUseMultipleInstances )
{
  SetBoolValue("can_use_multiple_devicecontexts_concurrently", aCanUseMultipleInstances);
}

#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

//---------------
// static members
GlobalPrinters GlobalPrinters::mGlobalPrinters;
nsStringArray* GlobalPrinters::mGlobalPrinterList = nsnull;
//---------------

nsDeviceContextSpecGTK::nsDeviceContextSpecGTK()
{
  DO_PR_DEBUG_LOG(("nsDeviceContextSpecGTK::nsDeviceContextSpecGTK()\n"));
  mPrintJob = nsnull;
}

nsDeviceContextSpecGTK::~nsDeviceContextSpecGTK()
{
  DO_PR_DEBUG_LOG(("nsDeviceContextSpecGTK::~nsDeviceContextSpecGTK()\n"));
  delete mPrintJob;
}

NS_IMPL_ISUPPORTS1(nsDeviceContextSpecGTK,
                   nsIDeviceContextSpec)

//#define USE_PDF 1
#include "gfxPDFSurface.h"
#include "gfxPSSurface.h"
#include "nsUnitConversion.h"
NS_IMETHODIMP nsDeviceContextSpecGTK::GetSurfaceForPrinter(gfxASurface **aSurface)
{
  const char *path;
  GetPath(&path);

  PRInt32 width, height;
  GetPageSizeInTwips(&width, &height);
  double w, h;
  // convert twips to points
  w = width/20;
  h = height/20;

  printf("\"%s\", %d, %d\n", path, width, height);

  nsCOMPtr<nsILocalFile> file = do_CreateInstance("@mozilla.org/file/local;1");
  nsresult rv = file->InitWithPath(NS_ConvertUTF8toUTF16(path));
  if (NS_FAILED(rv))
    return rv;

  nsCOMPtr<nsIFileOutputStream> stream = do_CreateInstance("@mozilla.org/network/file-output-stream;1");
  rv = stream->Init(file, -1, -1, 0);
  if (NS_FAILED(rv))
    return rv;

  nsPrintJobFactoryGTK::CreatePrintJob((this), mPrintJob);
#ifdef USE_PDF
  gfxPDFSurface *surface = new gfxPDFSurface(stream, gfxSize(w, h));
#else
  gfxPSSurface *surface = new gfxPSSurface(stream, gfxSize(w, h));
#endif
//  surface->SetDPI(600, 600);
  
  *aSurface = surface;
  NS_ADDREF(*aSurface);

  return NS_OK;
}

/** -------------------------------------------------------
 *  Initialize the nsDeviceContextSpecGTK
 *  @update   dc 2/15/98
 *  @update   syd 3/2/99
 *
 * gisburn: Please note that this function exists as 1:1 copy in other
 * toolkits including:
 * - GTK+-toolkit:
 *   file:     mozilla/gfx/src/gtk/nsDeviceContextSpecG.cpp
 *   function: NS_IMETHODIMP nsDeviceContextSpecGTK::Init()
 * - Xlib-toolkit: 
 *   file:     mozilla/gfx/src/xlib/nsDeviceContextSpecXlib.cpp 
 *   function: NS_IMETHODIMP nsDeviceContextSpecXlib::Init()
 * 
 * ** Please update the other toolkits when changing this function.
 */
NS_IMETHODIMP nsDeviceContextSpecGTK::Init(nsIWidget *aWidget,
                                           nsIPrintSettings* aPS,
                                           PRBool aIsPrintPreview)
{
  DO_PR_DEBUG_LOG(("nsDeviceContextSpecGTK::Init(aPS=%p)\n", aPS));
  nsresult rv = NS_ERROR_FAILURE;

  mPrintSettings = aPS;

  // if there is a current selection then enable the "Selection" radio button
  rv = GlobalPrinters::GetInstance()->InitializeGlobalPrinters();
  if (NS_FAILED(rv)) {
    return rv;
  }

  GlobalPrinters::GetInstance()->FreeGlobalPrinters();

  if (aPS) {
    PRBool     reversed       = PR_FALSE;
    PRBool     color          = PR_FALSE;
    PRBool     tofile         = PR_FALSE;
    PRInt16    printRange     = nsIPrintSettings::kRangeAllPages;
    PRInt32    orientation    = NS_PORTRAIT;
    PRInt32    fromPage       = 1;
    PRInt32    toPage         = 1;
    PRUnichar *command        = nsnull;
    PRInt32    copies         = 1;
    PRUnichar *printer        = nsnull;
    PRUnichar *papername      = nsnull;
    PRUnichar *plexname       = nsnull;
    PRUnichar *resolutionname = nsnull;
    PRUnichar *colorspace     = nsnull;
    PRBool     downloadfonts  = PR_TRUE;
    PRUnichar *printfile      = nsnull;
    double     dleft          = 0.5;
    double     dright         = 0.5;
    double     dtop           = 0.5;
    double     dbottom        = 0.5; 

    aPS->GetPrinterName(&printer);
    aPS->GetPrintReversed(&reversed);
    aPS->GetPrintInColor(&color);
    aPS->GetPaperName(&papername);
    aPS->GetResolutionName(&resolutionname);
    aPS->GetColorspace(&colorspace);
    aPS->GetDownloadFonts(&downloadfonts);
    aPS->GetPlexName(&plexname);
    aPS->GetOrientation(&orientation);
    aPS->GetPrintCommand(&command);
    aPS->GetPrintRange(&printRange);
    aPS->GetToFileName(&printfile);
    aPS->GetPrintToFile(&tofile);
    aPS->GetStartPageRange(&fromPage);
    aPS->GetEndPageRange(&toPage);
    aPS->GetNumCopies(&copies);
    aPS->GetMarginTop(&dtop);
    aPS->GetMarginLeft(&dleft);
    aPS->GetMarginBottom(&dbottom);
    aPS->GetMarginRight(&dright);

    if (printfile)
      PL_strncpyz(mPath,      NS_ConvertUTF16toUTF8(printfile).get(), sizeof(mPath));
    if (command)
      PL_strncpyz(mCommand,   NS_ConvertUTF16toUTF8(command).get(),   sizeof(mCommand));  
    if (printer) 
      PL_strncpyz(mPrinter,   NS_ConvertUTF16toUTF8(printer).get(),   sizeof(mPrinter));        
    if (papername) 
      PL_strncpyz(mPaperName, NS_ConvertUTF16toUTF8(papername).get(), sizeof(mPaperName));  
    if (plexname) 
      PL_strncpyz(mPlexName,  NS_ConvertUTF16toUTF8(plexname).get(),  sizeof(mPlexName));  
    if (resolutionname) 
      PL_strncpyz(mResolutionName, NS_ConvertUTF16toUTF8(resolutionname).get(), sizeof(mResolutionName));  
    if (colorspace) 
      PL_strncpyz(mColorspace, NS_ConvertUTF16toUTF8(colorspace).get(), sizeof(mColorspace));  

    DO_PR_DEBUG_LOG(("margins:   %5.2f,%5.2f,%5.2f,%5.2f\n", dtop, dleft, dbottom, dright));
    DO_PR_DEBUG_LOG(("printRange %d\n",   printRange));
    DO_PR_DEBUG_LOG(("fromPage   %d\n",   fromPage));
    DO_PR_DEBUG_LOG(("toPage     %d\n",   toPage));
    DO_PR_DEBUG_LOG(("tofile     %d\n",   tofile));
    DO_PR_DEBUG_LOG(("printfile  '%s'\n", printfile? NS_ConvertUTF16toUTF8(printfile).get():"<NULL>"));
    DO_PR_DEBUG_LOG(("command    '%s'\n", command? NS_ConvertUTF16toUTF8(command).get():"<NULL>"));
    DO_PR_DEBUG_LOG(("printer    '%s'\n", printer? NS_ConvertUTF16toUTF8(printer).get():"<NULL>"));
    DO_PR_DEBUG_LOG(("papername  '%s'\n", papername? NS_ConvertUTF16toUTF8(papername).get():"<NULL>"));
    DO_PR_DEBUG_LOG(("plexname   '%s'\n", plexname? NS_ConvertUTF16toUTF8(plexname).get():"<NULL>"));
    DO_PR_DEBUG_LOG(("resolution '%s'\n", resolutionname? NS_ConvertUTF16toUTF8(resolutionname).get():"<NULL>"));
    DO_PR_DEBUG_LOG(("colorspace '%s'\n", colorspace? NS_ConvertUTF16toUTF8(colorspace).get():"<NULL>"));

    mTop         = dtop;
    mBottom      = dbottom;
    mLeft        = dleft;
    mRight       = dright;
    mFpf         = !reversed;
    mDownloadFonts = downloadfonts;
    mGrayscale   = !color;
    mOrientation = orientation;
    mToPrinter   = !tofile;
    mCopies      = copies;
    mIsPPreview  = aIsPrintPreview;
    mCancel      = PR_FALSE;
  }

  return rv;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetToPrinter(PRBool &aToPrinter)
{
  aToPrinter = mToPrinter;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetIsPrintPreview(PRBool &aIsPPreview)
{
  aIsPPreview = mIsPPreview;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetPrinterName ( const char **aPrinter )
{
   *aPrinter = mPrinter;
   return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetCopies ( int &aCopies )
{
   aCopies = mCopies;
   return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetFirstPageFirst(PRBool &aFpf)      
{
  aFpf = mFpf;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetGrayscale(PRBool &aGrayscale)      
{
  aGrayscale = mGrayscale;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetLandscape(PRBool &aLandscape)
{
  aLandscape = (mOrientation == NS_LANDSCAPE);
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetTopMargin(float &aValue)      
{
  aValue = mTop;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetBottomMargin(float &aValue)      
{
  aValue = mBottom;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetRightMargin(float &aValue)      
{
  aValue = mRight;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetLeftMargin(float &aValue)      
{
  aValue = mLeft;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetCommand(const char **aCommand)      
{
  *aCommand = mCommand;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetPath(const char **aPath)      
{
  *aPath = mPath;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetUserCancelled(PRBool &aCancel)     
{
  aCancel = mCancel;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetPaperName( const char **aPaperName )
{
  *aPaperName = mPaperName;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetPlexName( const char **aPlexName )
{
  *aPlexName = mPlexName;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetResolutionName( const char **aResolutionName )
{
  *aResolutionName = mResolutionName;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetColorspace( const char **aColorspace )
{
  *aColorspace = mColorspace;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetDownloadFonts(PRBool &aDownloadFonts)      
{
  aDownloadFonts = mDownloadFonts;
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetPageSizeInTwips(PRInt32 *aWidth, PRInt32 *aHeight)
{
  return mPrintSettings->GetPageSizeInTwips(aWidth, aHeight);
}

NS_IMETHODIMP nsDeviceContextSpecGTK::GetPrintMethod(PrintMethod &aMethod)
{
  return GetPrintMethod(mPrinter, aMethod);
}

/* static !! */
nsresult nsDeviceContextSpecGTK::GetPrintMethod(const char *aPrinter, PrintMethod &aMethod)
{
#if defined(USE_POSTSCRIPT)
  aMethod = pmPostScript;
  return NS_OK;
#else
  return NS_ERROR_UNEXPECTED;
#endif
}

NS_IMETHODIMP nsDeviceContextSpecGTK::ClosePrintManager()
{
  return NS_OK;
}

NS_IMETHODIMP nsDeviceContextSpecGTK::BeginDocument(PRUnichar * aTitle, PRUnichar * aPrintToFileName, PRInt32 aStartPage, PRInt32 aEndPage)
{
  return NS_OK;
}
#include <errno.h>
NS_IMETHODIMP nsDeviceContextSpecGTK::EndDocument()
{
  if (mToPrinter) {
    const char *path;
    GetPath(&path);
    FILE *src = fopen(path, "r");
    FILE *dst;
    mPrintJob->StartSubmission(&dst);
    while(!feof(src)) {
      char data[255] = {0};
      size_t s = fread(data, 1, sizeof(data), src);
      fwrite(data, 1, s, dst);
    }
    fclose(src);
    mPrintJob->FinishSubmission();
  }
  return NS_OK;
}

/* Get prefs for printer
 * Search order:
 * - Get prefs per printer name and module name
 * - Get prefs per printer name
 * - Get prefs per module name
 * - Get prefs
 */
static
nsresult CopyPrinterCharPref(nsIPrefBranch *pref, const char *modulename, const char *printername,
                             const char *prefname, nsXPIDLCString &return_buf)
{
  DO_PR_DEBUG_LOG(("CopyPrinterCharPref('%s', '%s', '%s')\n", modulename, printername, prefname));

  nsresult rv = NS_ERROR_FAILURE;
 
  if (printername && modulename) {
    /* Get prefs per printer name and module name */
    nsPrintfCString name(512, "print.%s.printer_%s.%s", modulename, printername, prefname);
    DO_PR_DEBUG_LOG(("trying to get '%s'\n", name.get()));
    rv = pref->GetCharPref(name.get(), getter_Copies(return_buf));
  }
  
  if (NS_FAILED(rv)) { 
    if (printername) {
      /* Get prefs per printer name */
      nsPrintfCString name(512, "print.printer_%s.%s", printername, prefname);
      DO_PR_DEBUG_LOG(("trying to get '%s'\n", name.get()));
      rv = pref->GetCharPref(name.get(), getter_Copies(return_buf));
    }

    if (NS_FAILED(rv)) {
      if (modulename) {
        /* Get prefs per module name */
        nsPrintfCString name(512, "print.%s.%s", modulename, prefname);
        DO_PR_DEBUG_LOG(("trying to get '%s'\n", name.get()));
        rv = pref->GetCharPref(name.get(), getter_Copies(return_buf));
      }
      
      if (NS_FAILED(rv)) {
        /* Get prefs */
        nsPrintfCString name(512, "print.%s", prefname);
        DO_PR_DEBUG_LOG(("trying to get '%s'\n", name.get()));
        rv = pref->GetCharPref(name.get(), getter_Copies(return_buf));
      }
    }
  }

#ifdef PR_LOG  
  if (NS_SUCCEEDED(rv)) {
    DO_PR_DEBUG_LOG(("CopyPrinterCharPref returning '%s'.\n", return_buf.get()));
  }
  else
  {
    DO_PR_DEBUG_LOG(("CopyPrinterCharPref failure.\n"));
  }
#endif /* PR_LOG */

  return rv;
}

//  Printer Enumerator
nsPrinterEnumeratorGTK::nsPrinterEnumeratorGTK()
{
}

NS_IMPL_ISUPPORTS1(nsPrinterEnumeratorGTK, nsIPrinterEnumerator)

NS_IMETHODIMP nsPrinterEnumeratorGTK::GetPrinterNameList(nsIStringEnumerator **aPrinterNameList)
{
  NS_ENSURE_ARG_POINTER(aPrinterNameList);
  *aPrinterNameList = nsnull;
  
  nsresult rv = GlobalPrinters::GetInstance()->InitializeGlobalPrinters();
  if (NS_FAILED(rv)) {
    return rv;
  }

  PRInt32 numPrinters = GlobalPrinters::GetInstance()->GetNumPrinters();
  nsStringArray *printers = new nsStringArray(numPrinters);
  if (!printers) {
    GlobalPrinters::GetInstance()->FreeGlobalPrinters();
    return NS_ERROR_OUT_OF_MEMORY;
  }
  
  int count = 0;
  while( count < numPrinters )
  {
    printers->AppendString(*GlobalPrinters::GetInstance()->GetStringAt(count++));
  }
  GlobalPrinters::GetInstance()->FreeGlobalPrinters();

  return NS_NewAdoptingStringEnumerator(aPrinterNameList, printers);
}

/* readonly attribute wstring defaultPrinterName; */
NS_IMETHODIMP nsPrinterEnumeratorGTK::GetDefaultPrinterName(PRUnichar **aDefaultPrinterName)
{
  DO_PR_DEBUG_LOG(("nsPrinterEnumeratorGTK::GetDefaultPrinterName()\n"));
  NS_ENSURE_ARG_POINTER(aDefaultPrinterName);

  GlobalPrinters::GetInstance()->GetDefaultPrinterName(aDefaultPrinterName);

  DO_PR_DEBUG_LOG(("GetDefaultPrinterName(): default printer='%s'.\n", NS_ConvertUTF16toUTF8(*aDefaultPrinterName).get()));
  return NS_OK;
}

/* void initPrintSettingsFromPrinter (in wstring aPrinterName, in nsIPrintSettings aPrintSettings); */
NS_IMETHODIMP nsPrinterEnumeratorGTK::InitPrintSettingsFromPrinter(const PRUnichar *aPrinterName, nsIPrintSettings *aPrintSettings)
{
  DO_PR_DEBUG_LOG(("nsPrinterEnumeratorGTK::InitPrintSettingsFromPrinter()"));
  nsresult rv;

  NS_ENSURE_ARG_POINTER(aPrinterName);
  NS_ENSURE_ARG_POINTER(aPrintSettings);
  
  NS_ENSURE_TRUE(*aPrinterName, NS_ERROR_FAILURE);
  NS_ENSURE_TRUE(aPrintSettings, NS_ERROR_FAILURE);

  nsCOMPtr<nsIPrefBranch> pPrefs = do_GetService(NS_PREFSERVICE_CONTRACTID, &rv);
  if (NS_FAILED(rv))
    return rv;

  nsXPIDLCString fullPrinterName, /* Full name of printer incl. driver-specific prefix */ 
                 printerName;     /* "Stripped" name of printer */
  fullPrinterName.Assign(NS_ConvertUTF16toUTF8(aPrinterName));
  printerName.Assign(NS_ConvertUTF16toUTF8(aPrinterName));
  DO_PR_DEBUG_LOG(("printerName='%s'\n", printerName.get()));
  
  PrintMethod type = pmInvalid;
  rv = nsDeviceContextSpecGTK::GetPrintMethod(printerName, type);
  if (NS_FAILED(rv))
    return rv;

#ifdef USE_POSTSCRIPT
  /* "Demangle" postscript printer name */
  if (type == pmPostScript) {
    /* Strip the printing method name from the printer,
     * e.g. turn "PostScript/foobar" to "foobar" */
    PRInt32 slash = printerName.FindChar('/');
    if (kNotFound != slash)
      printerName.Cut(0, slash + 1);
  }
#endif /* USE_POSTSCRIPT */

#ifdef SET_PRINTER_FEATURES_VIA_PREFS
  /* Defaults to FALSE */
  pPrefs->SetBoolPref(nsPrintfCString(256, PRINTERFEATURES_PREF ".%s.has_special_printerfeatures", fullPrinterName.get()).get(), PR_FALSE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

  
  /* Set filename */
  nsXPIDLCString filename;
  if (NS_FAILED(CopyPrinterCharPref(pPrefs, nsnull, printerName, "filename", filename))) {
    const char *path;
  
    if (!(path = PR_GetEnv("PWD")))
      path = PR_GetEnv("HOME");
  
    if (path)
      filename = nsPrintfCString(PATH_MAX, "%s/mozilla.ps", path);
    else
      filename.AssignLiteral("mozilla.ps");
  }  
  DO_PR_DEBUG_LOG(("Setting default filename to '%s'\n", filename.get()));
  aPrintSettings->SetToFileName(NS_ConvertUTF8toUTF16(filename).get());

  aPrintSettings->SetIsInitializedFromPrinter(PR_TRUE);

#ifdef USE_POSTSCRIPT
  if (type == pmPostScript) {
    DO_PR_DEBUG_LOG(("InitPrintSettingsFromPrinter() for PostScript printer\n"));

#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    nsPrinterFeatures printerFeatures(fullPrinterName);

    printerFeatures.SetSupportsPaperSizeChange(PR_TRUE);
    printerFeatures.SetSupportsOrientationChange(PR_TRUE);
    printerFeatures.SetSupportsPlexChange(PR_FALSE);
    printerFeatures.SetSupportsResolutionNameChange(PR_FALSE);
    printerFeatures.SetSupportsColorspaceChange(PR_FALSE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */ 
      
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetCanChangeOrientation(PR_TRUE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

    nsXPIDLCString orientation;
    if (NS_SUCCEEDED(CopyPrinterCharPref(pPrefs, "postscript", printerName, "orientation", orientation))) {
      if (orientation.LowerCaseEqualsLiteral("portrait")) {
        DO_PR_DEBUG_LOG(("setting default orientation to 'portrait'\n"));
        aPrintSettings->SetOrientation(nsIPrintSettings::kPortraitOrientation);
      }
      else if (orientation.LowerCaseEqualsLiteral("landscape")) {
        DO_PR_DEBUG_LOG(("setting default orientation to 'landscape'\n"));
        aPrintSettings->SetOrientation(nsIPrintSettings::kLandscapeOrientation);  
      }
      else {
        DO_PR_DEBUG_LOG(("Unknown default orientation '%s'\n", orientation.get()));
      }
    }

#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetOrientationRecord(0, "portrait");
    printerFeatures.SetOrientationRecord(1, "landscape");
    printerFeatures.SetNumOrientationRecords(2);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

    /* PostScript module does not support changing the plex mode... */
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetCanChangePlex(PR_FALSE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */
    DO_PR_DEBUG_LOG(("setting default plex to '%s'\n", "default"));
    aPrintSettings->SetPlexName(NS_LITERAL_STRING("default").get());
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetPlexRecord(0, "default");
    printerFeatures.SetNumPlexRecords(1);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

    /* PostScript module does not support changing the resolution mode... */
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetCanChangeResolutionName(PR_FALSE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */
    DO_PR_DEBUG_LOG(("setting default resolution to '%s'\n", "default"));
    aPrintSettings->SetResolutionName(NS_LITERAL_STRING("default").get());
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetResolutionNameRecord(0, "default");
    printerFeatures.SetNumResolutionNameRecords(1);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

    /* PostScript module does not support changing the colorspace... */
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetCanChangeColorspace(PR_FALSE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */
    DO_PR_DEBUG_LOG(("setting default colorspace to '%s'\n", "default"));
    aPrintSettings->SetColorspace(NS_LITERAL_STRING("default").get());
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetColorspaceRecord(0, "default");
    printerFeatures.SetNumColorspaceRecords(1);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */   

#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetCanChangePaperSize(PR_TRUE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */
    nsXPIDLCString papername;
    if (NS_SUCCEEDED(CopyPrinterCharPref(pPrefs, "postscript", printerName, "paper_size", papername))) {
      nsPaperSizePS paper;

      if (paper.Find(papername)) {
        DO_PR_DEBUG_LOG(("setting default paper size to '%s' (%g mm/%g mm)\n",
              paper.Name(), paper.Width_mm(), paper.Height_mm()));
	aPrintSettings->SetPaperSizeUnit(nsIPrintSettings::kPaperSizeMillimeters);
        aPrintSettings->SetPaperWidth(paper.Width_mm());
        aPrintSettings->SetPaperHeight(paper.Height_mm());
        aPrintSettings->SetPaperName(NS_ConvertASCIItoUTF16(paper.Name()).get());
      }
      else {
        DO_PR_DEBUG_LOG(("Unknown paper size '%s' given.\n", papername.get()));
      }
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
      paper.First();
      int count = 0;
      while (!paper.AtEnd())
      {
        printerFeatures.SetPaperRecord(count++, paper.Name(),
            (int)paper.Width_mm(), (int)paper.Height_mm(), !paper.IsMetric());
        paper.Next();
      }
      printerFeatures.SetNumPaperSizeRecords(count);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */
    }

    PRBool hasSpoolerCmd = (nsPSPrinterList::kTypePS ==
        nsPSPrinterList::GetPrinterType(fullPrinterName));
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetSupportsSpoolerCommandChange(hasSpoolerCmd);
    printerFeatures.SetCanChangeSpoolerCommand(hasSpoolerCmd);

    /* Postscript module does not pass the job title to lpr */
    printerFeatures.SetSupportsJobTitleChange(PR_FALSE);
    printerFeatures.SetCanChangeJobTitle(PR_FALSE);
    /* Postscript module has no control over builtin fonts yet */
    printerFeatures.SetSupportsDownloadFontsChange(PR_FALSE);
    printerFeatures.SetCanChangeDownloadFonts(PR_FALSE);
    /* Postscript module does not support multiple colorspaces
     * so it has to use the old way */
    printerFeatures.SetSupportsPrintInColorChange(PR_TRUE);
    printerFeatures.SetCanChangePrintInColor(PR_TRUE);
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

    if (hasSpoolerCmd) {
      nsXPIDLCString command;
      if (NS_SUCCEEDED(CopyPrinterCharPref(pPrefs, "postscript",
            printerName, "print_command", command))) {
        DO_PR_DEBUG_LOG(("setting default print command to '%s'\n",
            command.get()));
        aPrintSettings->SetPrintCommand(NS_ConvertUTF8toUTF16(command).get());
      }
    }
    
#ifdef SET_PRINTER_FEATURES_VIA_PREFS
    printerFeatures.SetCanChangeNumCopies(PR_TRUE);   
#endif /* SET_PRINTER_FEATURES_VIA_PREFS */

    return NS_OK;    
  }
#endif /* USE_POSTSCRIPT */

  return NS_ERROR_UNEXPECTED;
}

NS_IMETHODIMP nsPrinterEnumeratorGTK::DisplayPropertiesDlg(const PRUnichar *aPrinter, nsIPrintSettings *aPrintSettings)
{
  return NS_OK;
}


//----------------------------------------------------------------------
//String array enumeration callback to append a printer to the global
//printer list.
static PRBool
GlobalPrinterEnumFunc(nsCString& aName, void *aData)
{
  nsStringArray *a = (nsStringArray *)aData;
  a->AppendString(NS_ConvertUTF8toUTF16(aName));
  return PR_TRUE;
}

//----------------------------------------------------------------------
nsresult GlobalPrinters::InitializeGlobalPrinters ()
{
  if (PrintersAreAllocated()) {
    return NS_OK;
  }

  mGlobalPrinterList = new nsStringArray();
  if (!mGlobalPrinterList) 
    return NS_ERROR_OUT_OF_MEMORY;

  nsresult rv;
  nsCOMPtr<nsIPrefBranch> pPrefs = do_GetService(NS_PREFSERVICE_CONTRACTID, &rv);
  if (NS_FAILED(rv))
    return rv;
      
#ifdef USE_POSTSCRIPT
  nsPSPrinterList psMgr;
  if (NS_SUCCEEDED(psMgr.Init()) && psMgr.Enabled()) {
    /* Get the list of PostScript-module printers */
    nsCStringArray printerList;
    psMgr.GetPrinterList(printerList);
    printerList.EnumerateForwards(GlobalPrinterEnumFunc, mGlobalPrinterList);
  }
#endif /* USE_POSTSCRIPT */  
      
  /* If there are no printers available after all checks, return an error */
  if (!mGlobalPrinterList->Count())
  {
    /* Make sure we do not cache an empty printer list */
    FreeGlobalPrinters();

    return NS_ERROR_GFX_PRINTER_NO_PRINTER_AVAILABLE;
  }

  return NS_OK;
}

//----------------------------------------------------------------------
void GlobalPrinters::FreeGlobalPrinters()
{
  if (mGlobalPrinterList) {
    delete mGlobalPrinterList;
    mGlobalPrinterList = nsnull;
  }  
}

void 
GlobalPrinters::GetDefaultPrinterName(PRUnichar **aDefaultPrinterName)
{
  *aDefaultPrinterName = nsnull;
  
  PRBool allocate = (GlobalPrinters::GetInstance()->PrintersAreAllocated() == PR_FALSE);
  
  if (allocate) {
    nsresult rv = GlobalPrinters::GetInstance()->InitializeGlobalPrinters();
    if (NS_FAILED(rv)) {
      return;
    }
  }
  NS_ASSERTION(GlobalPrinters::GetInstance()->PrintersAreAllocated(), "no GlobalPrinters");

  if (GlobalPrinters::GetInstance()->GetNumPrinters() == 0)
    return;
  
  *aDefaultPrinterName = ToNewUnicode(*GlobalPrinters::GetInstance()->GetStringAt(0));

  if (allocate) {  
    GlobalPrinters::GetInstance()->FreeGlobalPrinters();
  }  
}