This begins the process of renaming mshell to waveshell everywhere by
making the most simple changes. There will need to be additional changes
in the future, but the hope is to merge simple changes in now to reduce
the number of future merge conflicts.
This improves the ephemeral command runner to allow for honoring of
timeouts and proper handling of overriding the current working
directory. It also fixes some partially transparent font colors in light
mode, making them solid instead. It also updates the InputModel to be
auto-observable and utilize some getters to ensure the cmdinput is
getting updated whenever necessary state changes take place.
* feat: add gui elements to configure ssh pw cache
This adds a dropdown for on/off/notimeout, a number entry box for a
timeout value, and a toggle for clearing when the computer sleeps.
* fix: improve password timeout entry
This makes the password timeout more consistent by using an inline
settings element. It also creates the inline settings element to parse
the input.
* feat: turn sudo password caching on and off
* feat: use configurable sudo timeout
This makes it possible to control how long waveterm stores your sudo
password. Note that if it changes, it immediately clears the cached
passwords.
* fix: clear existing sudo passwords if switched off
When the sudo password store state is changed to "off", all existing
passwords must immediately be cleared automatically.
* feat: allow clearing sudo passwords on suspend
This option makes it so the sudo passwords will be cleared when the
computer falls asleep. It will never be used in the case where the
password is set to never time out.
* feat: allow notimeout to prevent sudo pw clear
This option allows the sudo timeout to be ignored while it is selected.
* feat: adjust current deadline based on user config
This allows the deadline to update as changes to the config are
happening.
* fix: reject a sudopwtimeout of 0 on the backend
* fix: use the default sudoPwTimeout for empty input
* fix: specify the timeout length is minutes
* fix: store sudopwtimeout in ms instead of minutes
* fix: formatting the default sudo timeout
By changing the order of operations, this no longer shows up as NaN if
the default is used.
* refactor: consolidate inlinesettingstextedit
This removes the number variant and combines them into the same class
with an option to switch between the two behaviors.
* refactor: consolidate textfield and numberfield
This removes the number variant of textfield. The textfield component
can now act as a numberfield when the optional isNumber prop is true.
* feat: share sudo between pty sessions
This is a first pass at a feature to cache the sudo password and share
it between different pty sessions. This makes it possible to not require
manual password entry every time sudo is used.
* feat: allow error handling and canceling sudo cmds
This adds the missing functionality that prevented failed sudo commands
from automatically closing.
* feat: restrict sudo caching to dev mode for now
* modify fullCmdStr not pk.Command
* refactor: condense ecdh encryptor creation
This refactors the common pieces needed to create an encryptor from an
ecdh key pair into a common function.
* refactor: rename promptenc to waveenc
* feat: add command to clear sudo password
We currently do not provide use of the sudo -k and sudo -K commands to
clear the sudo password. This adds a /sudo:clear command to handle it in
the meantime.
* feat: add kwarg to force sudo
In cases where parsing for sudo doesn't work, this provides an alternate
wave kwarg to use instead. It can be used with [sudo=1] at the beginning
of a command.
* refactor: simplify sudoArg parsing
* feat: allow user to clear all sudo passwords
This introduces the "all" kwarg for the sudo:clear command in order to
clear all sudo passwords.
* fix: handle deadline with real time
Golang's time module uses monatomic time by default, but that is not
desired for the password timeout since we want the timer to continue
even if the computer is asleep. We now avoid this by directly comparing
the unix timestamps.
* fix: remove sudo restriction to dev mode
This allows it to be used in regular builds as well.
* fix: switch to password timeout without wait group
This removes an unnecessary waiting period for sudo password entry.
* fix: update deadline in sudo:clear
This allows sudo:clear to cancel the goroutine for watching the password
timer.
* fix: pluralize sudo:clear message when all=1
This changes the output message for /sudo:clear to indicate multiple
passwords cleared if the all=1 kwarg is used.
* fix: use GetRemoteMap for getting remotes in clear
The sudo:clear command was directly looping over the GlobalStore.Map
which is not thread safe. Switched to GetRemoteMap which uses a lock
internally.
* fix: allow sudo metacmd to set sudo false
This fixes the logic for resolving if a command is a sudo command. This
change makes it possible for the sudo metacmd kwarg to force sudo to be
false.
* add command validation to shellapi. mock out bash/zsh versions
* implement validate command fn bash and zsh
* test validate command
* change rtnstate commands to always end with a builtin, so we always get our exit trap to run
* simplify the rtnstate modification, don't add the 'wait' (as this is a different problem/feature)
* update schema
* fix: add vix for missing known_hosts file
In a recent cleanup, I accidentally deleted this fix from before. This
adds it back.
* chore: clarify that the ssh should use private key
* have initial run-command return faster to the frontend for quicker updating. cuts time from 70-80ms down to 20ms for an average command
* remove wlogs
* more logging cleanup
* fix focus for when start cmd returns an error
* initial
* save work, starting to add backend types
* save work
* save work
* Add EphemeralWriteCloser
* Command pipes thru, triggers infinite loop
* save debugging
* fix bad merge
* save debug statements
* fixing spaghetti
* clean up code
* got cwd override working
* Add separate paths for stdout and stderr writers
* fix stdout/stderr
* env vars are now working
* revert waveshell changes
* Making EphemeralWriteCloser into a more generic BufferedPipe
* formatting
* comment
* delete unused package
* more naming changes
* add package comment
* add UsePty to EphemeralRunOpts
* document UsePty
* ensure only one downstream writer can read from the buffer
* store pointer to syncs
* remove inshellisense stuff for now
* remove debugs
* revert yarn
* remove unnecessary debugs in main-server
* more debugging removed
* revert tsconfig
* remote statemap from waveshell server (diff against initial state)
* move ShellStatePtr from sstore to packet so it can be passed over the wire
* add finalstatebaseptr to cmddone
* much improved diff computation code on wavesrv side
* fix displayname -- now using hash
* add comments, change a couple msh.WriteToPtyBuffer calls to log.Printfs
A recent change made it possible to get stuck in a loop when connecting
to a remote. This reverts the part of it that caused this while
retaining the other behavior. This makes it possible to add to blank
known_host files again. It also adds a printout to display when a
connection is complete.
* working on re-init when you create a tab. some refactoring of existing reinit to make the messaging clearer. auto-connect, etc.
* working to remove the 'default' shell states out of MShellProc. each tab should have its own state that gets set on open.
* refactor newtab settings into individual components (and move to a new file)
* more refactoring of tab settings -- use same control in settings and newtab
* have screensettings use the same newtab settings components
* use same conn dropdown, fix classes, update some of the confirm messages to be less confusing (replace screen with tab)
* force a cr on a new tab to initialize state in a new line. poc right now, need to add to new workspace workflow as well
* small fixups
* remove nohist from GetRawStr, make const
* update hover behavior for tabs
* fix interaction between change remote dropdown, cmdinput, error handling, and selecting a remote
* only switch screen remote if the activemainview is session (new remote flow). don't switch it if we're on the connections page which is confusing. also make it interactive
* fix wording on tos modal
* allow empty workspaces. also allow the last workspace to be deleted. (prep for new startup sequence where we initialize the first session after tos modal)
* add some dead code that might come in use later (when we change how we show connection in cmdinput)
* working a cople different angles. new settings tab-pulldown (likely orphaned). and then allowing null activeScreen and null activeSession in workspaceview (show appropriate messages, and give buttons to create new tabs/workspaces). prep for new startup flow
* don't call initActiveShells anymore. also call ensureWorkspace() on TOS close
* trying to use new pulldown screen settings
* experiment with an escape keybinding
* working on tab settings close triggers
* close tab settings on tab switch
* small updates to tos popup, reorder, update button text/size, small wording updates
* when deleting a screen, send SIGHUP to all running commands
* not sure how this happened, lineid should not be passed to setLineFocus
* remove context timeouts for ReInit (it is now interactive, so it gets canceled like a normal command -- via ^C, and should not timeout on its own)
* deal with screen/session tombstones updates (ignore to quite warning)
* remove defaultfestate from remote
* fix issue with removing default ris
* remove dead code
* open the settings pulldown for new screens
* update prompt to show when the shell is still initializing (or if it failed)
* switch buttons to use wave button class, update messages, and add warning for no shell state
* all an override of rptr for dyncmds. needed for the 'connect' command (we need to set the rptr to the *new* connection rather than the old one)
* remove old commented out code
* fix error logs in scws
* new RpcFollowUpPacketType
* make the rpc/followup handlers generic on the server side -- using new RpcHandlers map and RpcFollowUpPacketType
* rpcinputpacket for passing user input back through to reinit command
* add WAVETERM_DEV env var in dev mode
* remove unused code, ensure mshell and rcfile directory on startup (prevent root clobber with sudo)
* combine all feinput into one function msh.HandleFeInput, and add a new concept of input sinks for special cases (like reinit)
* allow reset to accept user input (to get around interactive initialization problems)
* tone down the selection background highlight color on dark mode. easier to read selected text
* fix command focus and done focus issues with dynamic (non-run) commands
* add 'module' as a 'rtnstate' command (#478)
* reinitialize shells in parallel, fix timeouts, better error messages
* reset command now initiates and completes async so there is feedback that something is happening when it takes a long time
* switch from standard rpc to rpciter
* checkpoint on reinit -- stream output, stats packet, logging to cmd pty, new endBytes for EOF
* make generic versions of endbytes scanner and channel output funcs
* update bash to use more modern state parsing (tricks learned from zsh)
* verbose mode, fix stats output message
* add a diff when verbose mode is on
* remove two unused packet types, remove unused detatched command code
* CmdStart is invalid in this command loop
* slight refactor, remove closure funcs
* pass rct through to 'handle' funcs
* deal with rct (running command), update handler funcs accordingly
* update for runningcmdtype to be a pointer in the map (for updates)
* lots of changes related to ephemeral commands (for sync), checkpoint
* fix ephemeral setting
* sync shell state when you switch to a new tab
* fix: set golbal ssh config to correct path
This adds the missing "etc" directory to the path for the global config
file.
* chore: update auth mode tooltip
This just changes the text to be slightly more accurate to the current
behavior.
* feat: add box to disable waveshell install modal
This hooks in to the existing don't show this again code that pops up
when creating a modal.
* refactor: remove install modal in remote creation
There used to be a modal that popped up while installing a remote that
informed the user that waveshell gets installed on their remote. Since
we have a new modal that pops up at the time of install, the older modal
can be removed.
* fix: allow user to cancel ssh dial
The new ssh code broke dial for invalid urls since the context did not
cancel the dial or any associated user input. This change reconnects
the context along with the context for installing waveshell.
* style: widen the rconndetail modal
The rconndetail modal is currently narrower than the xtermjs element
which results in awkward scrolling if a line is long. This change makes
the width auto so it can size itself as needed.
* add a max-width for safety
* checkpoint some ideas on a new branch
* checkpoint on new errors / errorcode passing
* get CodedError piped all the way through to infomsg
* implement a /reset:cwd command to deal with cases when the cwd is invalid. other assorted debugging, utility, and fixups
* on invalid cwd, show message to run /reset:cwd
* fix: allow ssh user to use numbers/capital letters
Prior to this change, usernames could not start with numbers and could
not contain capital letters at all. Note that the username can also
start with capital letters.
* fix: update ssh_config with IdentityFiles fix
This adds the update that provides the ssh2 defaults for IdentityFiles.
This will allow the usual defaults to be searched when none are
explicitly provided.
* fix: overwrite identity files instead of appending
This change makes it so a waveterm configured identity file will
overwrite the one in the config instead of attempting to append it. This
matches the behavior of openssh.
* style: use regular font for markdown user input
This makes the Markdown User Input indistinct from user input without
markdown. It changes the font and makes a couple small adjustments to
the font size and line height.
* fix: use font property instead of font-family
The markdown css for User Input can be simplified with the font being
set by the "font" property rather than the "font-family" property.
Mike SawkaandGitHub
Sylvie CroweandGitHub
Evan SimkowitzandGitHub
Cole LashleyandGitHub