I've reworked the autocomplete parser to more closely match Newton, the
Fig-compatible parser I prototyped earlier this year. I was able to move
a lot faster by reusing patterns that inshellisense proved out, such as
for templates and generators.
I also support some features that inshellisense doesn't, like proper
combining of Posix-compatible flags, handling of option argument
separators, and handling of cursors in insertValues.
This begins the process of renaming mshell to waveshell everywhere by
making the most simple changes. There will need to be additional changes
in the future, but the hope is to merge simple changes in now to reduce
the number of future merge conflicts.
* feat: add gui elements to configure ssh pw cache
This adds a dropdown for on/off/notimeout, a number entry box for a
timeout value, and a toggle for clearing when the computer sleeps.
* fix: improve password timeout entry
This makes the password timeout more consistent by using an inline
settings element. It also creates the inline settings element to parse
the input.
* feat: turn sudo password caching on and off
* feat: use configurable sudo timeout
This makes it possible to control how long waveterm stores your sudo
password. Note that if it changes, it immediately clears the cached
passwords.
* fix: clear existing sudo passwords if switched off
When the sudo password store state is changed to "off", all existing
passwords must immediately be cleared automatically.
* feat: allow clearing sudo passwords on suspend
This option makes it so the sudo passwords will be cleared when the
computer falls asleep. It will never be used in the case where the
password is set to never time out.
* feat: allow notimeout to prevent sudo pw clear
This option allows the sudo timeout to be ignored while it is selected.
* feat: adjust current deadline based on user config
This allows the deadline to update as changes to the config are
happening.
* fix: reject a sudopwtimeout of 0 on the backend
* fix: use the default sudoPwTimeout for empty input
* fix: specify the timeout length is minutes
* fix: store sudopwtimeout in ms instead of minutes
* fix: formatting the default sudo timeout
By changing the order of operations, this no longer shows up as NaN if
the default is used.
* refactor: consolidate inlinesettingstextedit
This removes the number variant and combines them into the same class
with an option to switch between the two behaviors.
* refactor: consolidate textfield and numberfield
This removes the number variant of textfield. The textfield component
can now act as a numberfield when the optional isNumber prop is true.
* added ai timeout setting
* addressed review comments
* fixed baseurl gating for telemetry
* updated copy
* addressed review comments
* removed prefix for client:show and added units to timeout
* changed timeout to use ms precision
* save work
* reusable StyleBlock component
* StyleBlock in elements dir
* root level
* ability to inherit root styles
* change prop from classname to selector
* selector should always be :root
* remove selector prop from StyleBlock
* working
* cleanup
* loadThemeStyles doesn't have to be async
* revert changes in tabs2.less
* remove old implementation
* cleanup
* remove file from another branch
* fix issue where line in history view doesn't reflect the terminal theme
* add key and value validation
* add label to tab settings terminal theme dropdown
* save work
* save work
* save work
* working
* trigger componentDidUpdate when switching tabs and sessions
* cleanup
* save work
* save work
* use UpdatePacket for theme changes as well
* make methods cohesive
* use themes coming from backend
* reload terminal when styel block is unmounted and mounted
* fix validation
* re-render terminal when theme is updated
* remove test styles
* cleanup
* more cleanup
* revert unneeded change
* more cleanup
* fix type
* more cleanup
* render style blocks in the header instead of body using portal
* add ability to reuse and dispose TermThemes instance and file watcher
* remove comment
* minor change
* separate filewatcher as singleton
* do not render app when term theme style blocks aren't rendered first
* only render main when termstyles have been rendered already
* add comment
* use DoUpdate to send themes to front-end
* support to watch subdirectories
* added support for watch subdirectories
* make watcher more flexible so it can be closed anywhere
* cleanup
* undo the app/main split
* use TermThemesType in creating initial value for Themes field
* simplify code
* fix issue where dropdown label doesn't float when the theme selected is Inherit
* remove unsed var
* start watcher in main, merge themes (don't overwrite) on event.
* ensure terminal-themes directory is created on startup
* ah, wait for termThemes to be set (the connect packet needs to have been processed to proceed with rendering)
* have initial run-command return faster to the frontend for quicker updating. cuts time from 70-80ms down to 20ms for an average command
* remove wlogs
* more logging cleanup
* fix focus for when start cmd returns an error
* initial
* save work, starting to add backend types
* save work
* save work
* Add EphemeralWriteCloser
* Command pipes thru, triggers infinite loop
* save debugging
* fix bad merge
* save debug statements
* fixing spaghetti
* clean up code
* got cwd override working
* Add separate paths for stdout and stderr writers
* fix stdout/stderr
* env vars are now working
* revert waveshell changes
* Making EphemeralWriteCloser into a more generic BufferedPipe
* formatting
* comment
* delete unused package
* more naming changes
* add package comment
* add UsePty to EphemeralRunOpts
* document UsePty
* ensure only one downstream writer can read from the buffer
* store pointer to syncs
* remove inshellisense stuff for now
* remove debugs
* revert yarn
* remove unnecessary debugs in main-server
* more debugging removed
* revert tsconfig
* init
* use setStyleVar
* backend implementation. scrope level terminal theming.
* only invoke this.applyTermTheme for keys that are updated. command runner for global term theme
* invoke applyTermTheme for global terminal themes as well
* fix nil error
* fix issue were theme can't be found
* fix issue where selected termtheme is not set as default value
* term theme switcher for session
* do not force reload after setting css vars
* fix issues. screenview terminal theme switcher
* remove debugging code
* move getTermThemes to util
* fix global theme reset
* fix workspace theme reset
* fix screenview terminal theme reset issue
* cleanup
* do not apply theme if theme hasn't changed
* do not apply theme if theme hasn't changed in workspace view
* cleanup
* cleanup
* force reload terminal
* fix inconsistency
* fix reset issue
* add a mobx reaction so that theming working when switching sessions
* workig reset
* simplify and cleanup
* refactor
* working global and session terminal theming
* add check
* perf improvement
* more perf improvements
* put reaction componentDidUpdate to make sure ref is already associated to the element
* cleanup
* fix issue where session theme is overriden by global theme on reload
* reduce flickering on reload
* more on reducing flickering on reload
* cleanup
* more cleanup
* fix file not found when no global theme is set
* screen level terminal theming
* update comment
* re-render terminal in history view. cleanup.
* cleanup
* merge main
* remote statemap from waveshell server (diff against initial state)
* move ShellStatePtr from sstore to packet so it can be passed over the wire
* add finalstatebaseptr to cmddone
* much improved diff computation code on wavesrv side
* fix displayname -- now using hash
* add comments, change a couple msh.WriteToPtyBuffer calls to log.Printfs
* working on re-init when you create a tab. some refactoring of existing reinit to make the messaging clearer. auto-connect, etc.
* working to remove the 'default' shell states out of MShellProc. each tab should have its own state that gets set on open.
* refactor newtab settings into individual components (and move to a new file)
* more refactoring of tab settings -- use same control in settings and newtab
* have screensettings use the same newtab settings components
* use same conn dropdown, fix classes, update some of the confirm messages to be less confusing (replace screen with tab)
* force a cr on a new tab to initialize state in a new line. poc right now, need to add to new workspace workflow as well
* small fixups
* remove nohist from GetRawStr, make const
* update hover behavior for tabs
* fix interaction between change remote dropdown, cmdinput, error handling, and selecting a remote
* only switch screen remote if the activemainview is session (new remote flow). don't switch it if we're on the connections page which is confusing. also make it interactive
* fix wording on tos modal
* allow empty workspaces. also allow the last workspace to be deleted. (prep for new startup sequence where we initialize the first session after tos modal)
* add some dead code that might come in use later (when we change how we show connection in cmdinput)
* working a cople different angles. new settings tab-pulldown (likely orphaned). and then allowing null activeScreen and null activeSession in workspaceview (show appropriate messages, and give buttons to create new tabs/workspaces). prep for new startup flow
* don't call initActiveShells anymore. also call ensureWorkspace() on TOS close
* trying to use new pulldown screen settings
* experiment with an escape keybinding
* working on tab settings close triggers
* close tab settings on tab switch
* small updates to tos popup, reorder, update button text/size, small wording updates
* when deleting a screen, send SIGHUP to all running commands
* not sure how this happened, lineid should not be passed to setLineFocus
* remove context timeouts for ReInit (it is now interactive, so it gets canceled like a normal command -- via ^C, and should not timeout on its own)
* deal with screen/session tombstones updates (ignore to quite warning)
* remove defaultfestate from remote
* fix issue with removing default ris
* remove dead code
* open the settings pulldown for new screens
* update prompt to show when the shell is still initializing (or if it failed)
* switch buttons to use wave button class, update messages, and add warning for no shell state
* all an override of rptr for dyncmds. needed for the 'connect' command (we need to set the rptr to the *new* connection rather than the old one)
* remove old commented out code
* checkpoint. track zmodloads, get the expanded PS1 value, change how we store and deal with 'prompt vars', add commands to track k8s context
* fix some warnings, change IsPVar to IsExtVar, checkpoint
* parse zmodloads into state
* restore zmodloads, be more careful around readonly variable setting to avoid errors
* init
* model
* pass model
* increase snap threshold
* move saving of state to model. backend implementation
* fix wrong clientdata prop
* right header space for right sidebar toggles
* button component refactor
* set default classname to primary
* remove debugging code
* hide trigger for now
* disable right sidebar in production (only show on dev for now)
* remove two unused packet types, remove unused detatched command code
* CmdStart is invalid in this command loop
* slight refactor, remove closure funcs
* pass rct through to 'handle' funcs
* deal with rct (running command), update handler funcs accordingly
* update for runningcmdtype to be a pointer in the map (for updates)
* lots of changes related to ephemeral commands (for sync), checkpoint
* fix ephemeral setting
* sync shell state when you switch to a new tab
* first pass of slash commands
* added mainview slashcommand
* added focus cmd input, added sleep
* addressed review comments
* addressed feedback
* demo idea of changing hide do cmd+m, can remove if we decide we don't like it
* added new keybinding for minimize
* addressed feedback
* added hide label
* fix hide (use app.hid(), not window.hide()
* fix history keybinding, make mainview command consistent
* checkpoint some ideas on a new branch
* checkpoint on new errors / errorcode passing
* get CodedError piped all the way through to infomsg
* implement a /reset:cwd command to deal with cases when the cwd is invalid. other assorted debugging, utility, and fixups
* on invalid cwd, show message to run /reset:cwd
* init
* init
* theme override mechanism by changing href value in header link tag
* remove debugging code
* remove debugging code. no need to force rerender
* remove overrides.less
* get some light colors showing in light theme
* testing hack font
* updates to allow font to be variable
* allow setting of font-family. get initial font family from electron (needed for loading)
* add termfontfamily
* update wave logos for README
* hook up fontfamily setting, remove old dropdown active var
* get app to reload on font change. reload fonts
* on termfontsize change, bump render version as well
Evan SimkowitzandGitHub
Mike SawkaandGitHub
Sylvie CroweandGitHub
Cole LashleyandGitHub
Red J AdayaandGitHub