Weike Chen 3d2613c428 GPIO: gpio-dwapb: Enable platform driver binding to MFD driver ...

The Synopsys DesignWare APB GPIO driver only supports open firmware devices.
But, like Intel Quark X1000 SOC, which has a single PCI function exporting
a GPIO and an I2C controller, it is a Multifunction device. This patch is
to enable the current Synopsys DesignWare APB GPIO driver to support the
Multifunction device which exports the designware GPIO controller.

Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2014-09-23 17:51:37 +02:00

..

ad5449.h

…

ad5755.h

…

ad7266.h

…

ad7291.h

staging:iio:ad7291: Move out of staging

2014-07-08 21:17:30 +01:00

ad7298.h

…

ad7303.h

…

ad7791.h

…

ad7793.h

…

ad7887.h

…

adau17x1.h

ASoC: Add ADAU1381/ADAU1781 audio CODEC support

2014-05-27 20:54:51 +01:00

adau1977.h

ASoC: Add ADAU1977 CODEC driver

2014-02-19 13:36:15 +09:00

ads7828.h

…

arm-ux500-pm.h

…

asoc-imx-ssi.h

…

asoc-kirkwood.h

…

asoc-mx27vis.h

…

asoc-palm27x.h

…

asoc-s3c24xx_simtec.h

ASoC: s3c24xx: Remove invalid file reference

2014-02-25 21:29:31 +09:00

asoc-s3c.h

ASoC: samsung: remove s5pc100 related codes

2014-07-14 19:05:00 +01:00

asoc-ti-mcbsp.h

ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h

2013-12-30 11:50:16 +00:00

asoc-ux500-msp.h

ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion

2014-01-07 15:36:09 +00:00

at24.h

misc: (at24) move header to linux/platform_data/

2013-09-30 06:02:34 +02:00

at91_adc.h

iio: adc: at91_adc: Add support for touchscreens without TSMR

2014-05-07 18:28:40 +02:00

ata-pxa.h

…

ata-samsung_cf.h

ata: pata_samsung_cf: removes s5pc100 related ata codes

2014-06-30 10:48:08 -04:00

atmel.h

Merge tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next

2014-06-03 09:01:02 -07:00

bd6107.h

backlight: Add ROHM BD6107 backlight driver

2013-07-16 13:01:19 +09:00

brcmfmac-sdio.h

brcmfmac: abstract tx packet processing functions

2013-08-15 16:07:55 -04:00

bt-nokia-h4p.h

staging/bluetooth: Add hci_h4p driver

2014-02-07 10:13:53 -08:00

camera-mx2.h

…

camera-mx3.h

[media] V4L2: mx3_camera: add support for asynchronous subdevice registration

2013-08-18 09:06:37 -03:00

camera-pxa.h

…

camera-rcar.h

[media] V4L2: soc_camera: Renesas R-Car VIN driver

2013-08-18 09:01:10 -03:00

clk-integrator.h

ARM: integrator: switch to fetch clocks from device tree

2014-02-13 11:20:42 +01:00

clk-lpss.h

…

clk-realview.h

…

clk-u300.h

…

clk-ux500.h

clk: ux500: Copy u8500_clk_init() ready for DT enablement

2013-09-26 11:05:26 +02:00

coda.h

…

crypto-atmel.h

…

crypto-ux500.h

…

cyttsp4.h

…

davinci_asp.h

ASoC: davinci-mcasp: Rename platform data struct

2014-02-03 18:26:59 +00:00

db8500_thermal.h

…

dma-atmel.h

…

dma-coh901318.h

…

dma-ep93xx.h

…

dma-imx-sdma.h

dma: imx-sdma: Add sdma firmware version 2 support

2013-12-16 09:18:47 +05:30

dma-imx.h

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

2014-08-11 07:14:01 -07:00

dma-mmp_tdma.h

dma: Cleanup dma-mmp_tdma.h header

2014-01-13 13:30:30 +05:30

dma-mv_xor.h

dma: mv_xor: Cleanup in dma-mv_xor.h header

2014-01-13 13:30:31 +05:30

dma-rcar-audmapp.h

shdma: add R-Car Audio DMAC peri peri driver

2014-03-29 19:38:09 +05:30

dma-rcar-hpbdma.h

dma: add driver for R-Car HPB-DMAC

2013-09-02 17:35:55 +05:30

dma-s3c24xx.h

ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442

2013-10-21 05:32:48 +09:00

dma-ste-dma40.h

…

dmtimer-omap.h

…

dwc3-exynos.h

…

dwc3-omap.h

…

edma.h

ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue

2014-07-28 17:03:13 +05:30

efm32-spi.h

spi: new controller driver for efm32 SoCs

2013-08-09 17:32:57 +01:00

efm32-uart.h

…

ehci-sh.h

…

elm.h

mtd: nand: omap: add support for BCH16_ECC - ELM driver updates

2014-05-20 17:52:14 -07:00

emif_plat.h

…

eth-netx.h

net: Cleanup in eth-netx.h

2014-01-02 03:30:35 -05:00

fsa9480.h

…

g762.h

…

gpio_backlight.h

backlight: Add GPIO-based backlight driver

2013-07-16 13:01:05 +09:00

gpio-davinci.h

gpio: remove obsolete tnetv107x driver

2014-03-05 10:44:44 +08:00

gpio-dwapb.h

GPIO: gpio-dwapb: Enable platform driver binding to MFD driver

2014-09-23 17:51:37 +02:00

gpio-em.h

gpio: em: Add pinctrl support

2013-07-21 17:24:41 +02:00

gpio-lpc32xx.h

ARM: lpc32xx: move custom GPIO header

2013-12-03 11:26:06 +01:00

gpio-omap.h

…

gpio-rcar.h

…

gpio-ts5500.h

…

hwmon-s3c.h

hwmon: (s3c) Trivial cleanup in hwmon-s3c.h

2014-01-14 21:36:52 -08:00

i2c-cbus-gpio.h

…

i2c-davinci.h

…

i2c-imx.h

…

i2c-nuc900.h

…

i2c-s3c2410.h

i2c: s3c2410: Trivial cleanup in header file

2014-03-10 17:32:28 +01:00

ina2xx.h

…

intel-mid_wdt.h

watchdog: add Intel MID watchdog driver support

2014-06-10 21:48:16 +02:00

invensense_mpu6050.h

…

iommu-omap.h

iommu/omap: Remove platform data da_start and da_end fields

2014-07-29 12:39:56 +02:00

ipmmu-vmsa.h

iommu: Add driver for Renesas VMSA-compatible IPMMU

2014-05-26 11:18:21 +02:00

irda-pxaficp.h

…

irq-renesas-intc-irqpin.h

…

irq-renesas-irqc.h

…

keyboard-pxa930_rotary.h

…

keyboard-spear.h

…

keypad-ep93xx.h

Input: keypad-ep93xx - cleanup header file

2013-12-27 17:20:21 -08:00

keypad-nomadik-ske.h

…

keypad-omap.h

Input: keypad-omap - cleanup header file

2013-12-27 17:20:22 -08:00

keypad-pxa27x.h

…

keypad-w90p910.h

…

keyscan-davinci.h

…

lcd-mipid.h

…

leds-kirkwood-netxbig.h

leds: kirkwood: Cleanup in header files

2014-01-27 17:28:51 -08:00

leds-kirkwood-ns2.h

leds: kirkwood: Cleanup in header files

2014-01-27 17:28:51 -08:00

leds-lm355x.h

…

leds-lm3642.h

…

leds-lp55xx.h

leds: lp55xx: handle enable pin in driver

2013-10-25 10:13:25 -07:00

leds-omap.h

…

leds-pca963x.h

leds-pca9633: Rename to leds-pca963x

2013-08-26 17:22:14 -07:00

leds-s3c24xx.h

leds: leds-s3c24xx: Trivial cleanup in header file

2014-02-27 09:57:11 -08:00

lm3630a_bl.h

backlight: lm3630: apply chip revision

2013-11-13 12:09:15 +09:00

lm3639_bl.h

…

lp855x.h

backlight: lp855x_bl: support new LP8555 device

2013-11-13 12:09:14 +09:00

lp8727.h

…

lp8755.h

…

lv5207lp.h

backlight: Add Sanyo LV5207LP backlight driver

2013-07-16 13:01:10 +09:00

macb.h

…

mailbox-omap.h

…

max197.h

hwmon: (max197) add include guard

2014-01-14 21:36:53 -08:00

max3421-hcd.h

usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity

2014-05-29 11:19:30 -07:00

max6697.h

…

mfd-mcp-sa11x0.h

mfd: Cleanup mfd-mcp-sa11x0.h header

2014-01-21 08:28:59 +00:00

microread.h

…

mmc-davinci.h

…

mmc-esdhc-imx.h

mmc: sdhci-esdhc-imx: add delay line setting support

2013-10-21 15:58:13 -04:00

mmc-msm_sdcc.h

mmc: msm: Cleanup mmc-msm_sdcc.h header

2014-02-25 15:43:15 -05:00

mmc-mvsdio.h

mmc: mvsdio: Cleanup mmc-mvsdio.h header

2014-02-25 15:43:23 -05:00

mmc-mxcmmc.h

…

mmc-omap.h

mmc: omap_hsmmc: Enable SDIO interrupt

2014-07-09 11:26:03 +02:00

mmc-pxamci.h

ARM: pxa: propagate errors from regulator_enable() to pxamci

2013-07-23 12:15:15 -07:00

mmc-s3cmci.h

…

mmc-sdhci-s3c.h

…

mmp_audio.h

…

mmp_dma.h

…

mouse-pxa930_trkball.h

…

msm_serial_hs.h

…

mtd-davinci-aemif.h

ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif

2014-02-23 20:33:18 +05:30

mtd-davinci.h

…

mtd-mxc_nand.h

…

mtd-nand-omap2.h

mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates

2014-05-20 17:52:14 -07:00

mtd-nand-pxa3xx.h

mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding

2014-05-21 12:55:09 -07:00

mtd-nand-s3c2410.h

mtd: nand: s3c2410: Trivial cleanup in header file

2014-03-10 22:42:26 -07:00

mtd-onenand-omap2.h

mtd: omap2: Cleanup header files

2014-01-11 11:39:18 -08:00

mtd-orion_nand.h

mtd: orion: Cleanup mtd-orion_nand.h header

2014-01-11 11:39:23 -08:00

mv_usb.h

…

net-cw1200.h

…

ntc_thermistor.h

hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS

2014-08-04 07:01:35 -07:00

omap1_bl.h

…

omap_drm.h

…

omap-twl4030.h

…

omap-wd-timer.h

…

pca953x.h

gpio: (gpio-pca953x) move header to linux/platform_data/

2013-08-29 12:33:52 -07:00

pcmcia-pxa2xx_viper.h

…

pinctrl-adi2.h

pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.

2013-09-19 14:37:27 +02:00

pinctrl-single.h

pinctrl: single: Add support for auxdata

2013-10-10 15:30:47 -07:00

pn544.h

nfc: Fix FSF address in file headers

2013-12-11 10:56:21 -05:00

pxa2xx_udc.h

…

pxa_sdhci.h

…

rcar-du.h

drm/rcar-du: Rework output routing support

2013-08-09 23:17:52 +02:00

remoteproc-omap.h

…

s3c-hsotg.h

…

s3c-hsudc.h

…

sa11x0-serial.h

…

samsung-usbphy.h

…

sc18is602.h

…

serial-imx.h

serial: imx: Remove init() and exit() platform callbacks

2014-02-28 16:36:45 -08:00

serial-omap.h

…

serial-sccnxp.h

Revert "serial: sccnxp: Add DT support"

2013-08-02 15:25:19 +08:00

sh_ipmmu.h

…

shmob_drm.h

…

sht15.h

hwmon: (sht15) add include guard

2014-01-14 21:36:53 -08:00

shtc1.h

hwmon: add support for Sensirion SHTC1 sensor

2014-06-12 08:36:48 -07:00

si5351.h

clk: si5351: remove variant from platform_data

2014-01-27 11:20:22 -08:00

simplefb.h

Merge tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

2013-09-05 09:49:32 -07:00

spi-clps711x.h

…

spi-davinci.h

…

spi-ep93xx.h

…

spi-imx.h

…

spi-nuc900.h

spi: nuc900: Cleanup spi-nuc900.h header

2013-12-30 12:46:20 +00:00

spi-omap2-mcspi.h

…

spi-s3c64xx.h

spi/s3c64xx: Trivial cleanup in header file

2014-02-16 09:59:13 +08:00

ssm2518.h

…

st21nfca.h

NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip

2014-04-22 00:37:25 +02:00

st21nfcb.h

NFC: st21nfcb: few code clean up

2014-07-23 00:49:37 +02:00

st1232_pdata.h

…

st_sensors_pdata.h

iio: Added ST-sensors platform data to select the DRDY interrupt pin

2013-08-03 18:40:28 +01:00

syscon.h

mfd: syscon: Add platform data with a regmap config name

2014-05-15 17:02:19 +01:00

tegra_emc.h

…

touchscreen-s3c2410.h

Input: s3c2410 - trivial cleanup in header file

2014-02-14 00:09:43 -08:00

tsl2563.h

…

uio_dmem_genirq.h

…

uio_pruss.h

…

usb3503.h

…

usb-davinci.h

…

usb-ehci-mxc.h

ARM: imx: move EHCI platform defines out of platform_data header

2014-07-18 16:10:04 +08:00

usb-ehci-orion.h

usb: ehci: Cleanup usb-ehci-orion.h header

2014-01-03 12:37:57 -08:00

usb-musb-ux500.h

…

usb-mx2.h

…

usb-ohci-pxa27x.h

…

usb-ohci-s3c2410.h

…

usb-omap1.h

usb: omap1: add extcon to platform data

2013-12-06 14:36:37 -06:00

usb-omap.h

…

usb-pxa3xx-ulpi.h

…

usb-rcar-gen2-phy.h

usb: phy: Add RCAR Gen2 USB phy

2013-10-10 11:59:48 -05:00

usb-rcar-phy.h

…

usb-s3c2410_udc.h

…

ux500_wdt.h

…

video_s3c.h

…

video-clcd-versatile.h

video: fix up versatile CLCD helper move

2014-07-23 17:41:00 +02:00

video-ep93xx.h

video: ep93xx: Cleanup video-ep93xx.h header

2014-01-17 10:57:41 +02:00

video-imxfb.h

video: imxfb: Remove unused fields from platform data structure

2014-02-28 12:35:22 +02:00

video-msm_fb.h

video: msm: Cleanup video-msm_fb.h header

2014-01-17 10:57:42 +02:00

video-mx3fb.h

…

video-nuc900fb.h

…

video-pxafb.h

video: pxa: Cleanup video-pxafb.h header

2014-01-17 10:57:42 +02:00

voltage-omap.h

…

vsp1.h

[media] v4l: vsp1: Add LUT support

2013-12-11 09:25:20 -02:00

wiznet.h

…

zforce_ts.h

Input: add driver for Neonode zForce based touchscreens

2013-10-31 08:46:08 -07:00