As in kvm_ioctl and _kvm_ioctl, add
the respective _vm_ioctl for vm_ioctl.
_vm_ioctl invokes an ioctl using the vm fd,
leaving the caller to test the result.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC
and TSC page). As a starting point, test the following:
1) Reference TSC is 1Ghz clock.
2) Reference TSC and TSC page give the same reading.
3) TSC page gets updated upon KVM_SET_CLOCK call.
4) TSC page does not get updated when guest opted for reenlightenment.
5) Disabled TSC page doesn't get updated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318140949.1065740-1-vkuznets@redhat.com>
[Add a host-side test using TSC + KVM_GET_MSR too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull arm64 fixes from Will Deacon:
"We've got a smattering of changes all over the place which we've
acrued since -rc1. To my knowledge, there aren't any pending issues at
the moment, but there's still plenty of time for something else to
crop up...
Summary:
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe()
arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
arm64: perf: Fix 64-bit event counter read truncation
arm64/mm: Fix __enable_mmu() for new TGRAN range values
kselftest: arm64: Fix exit code of sve-ptrace
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64/mm: Reorganize pfn_valid()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER
arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE
arm64: Drop support for CMDLINE_EXTEND
arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
The executable that we build for GPIO selftests was renamed to
gpio-mockup-cdev. Let's update .gitignore so that we don't show it
as an untracked file.
Fixes: 8bc395a6a2 ("selftests: gpio: rework and simplify test implementation")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect enum type definition in nfnetlink_cthelper UAPI,
from Dmitry V. Levin.
2) Remove extra space in deprecated automatic helper assignment
notice, from Klemen Košir.
3) Drop early socket demux socket after NAT mangling, from
Florian Westphal. Add a test to exercise this bug.
4) Fix bogus invalid packet report in the conntrack TCP tracker,
also from Florian.
5) Fix access to xt[NFPROTO_UNSPEC] list with no mutex
in target/match_revfn(), from Vasily Averin.
6) Disallow updates on the table ownership flag.
7) Fix double hook unregistration of tables with owner.
8) Remove bogus check on the table owner in __nft_release_tables().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
fix semicolon.cocci warning:
tools/testing/selftests/net/ipsec.c:1788:2-3: Unneeded semicolon
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-03-04
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 4 day(s) which contain
a total of 9 files changed, 128 insertions(+), 40 deletions(-).
The main changes are:
1) Fix 32-bit cmpxchg, from Brendan.
2) Fix atomic+fetch logic, from Ilya.
3) Fix usage of bpf_csum_diff in selftests, from Yauheni.
====================
As pointed out by Ilya and explained in the new comment, there's a
discrepancy between x86 and BPF CMPXCHG semantics: BPF always loads
the value from memory into r0, while x86 only does so when r0 and the
value in memory are different. The same issue affects s390.
At first this might sound like pure semantics, but it makes a real
difference when the comparison is 32-bit, since the load will
zero-extend r0/rax.
The fix is to explicitly zero-extend rax after doing such a
CMPXCHG. Since this problem affects multiple archs, this is done in
the verifier by patching in a BPF_ZEXT_REG instruction after every
32-bit cmpxchg. Any archs that don't need such manual zero-extension
can do a look-ahead with insn_is_zext to skip the unnecessary mov.
Note this still goes on top of Ilya's patch:
https://lore.kernel.org/bpf/20210301154019.129110-1-iii@linux.ibm.com/T/#u
Differences v5->v6[1]:
- Moved is_cmpxchg_insn and ensured it can be safely re-used. Also renamed it
and removed 'inline' to match the style of the is_*_function helpers.
- Fixed up comments in verifier test (thanks for the careful review, Martin!)
Differences v4->v5[1]:
- Moved the logic entirely into opt_subreg_zext_lo32_rnd_hi32, thanks to Martin
for suggesting this.
Differences v3->v4[1]:
- Moved the optimization against pointless zext into the correct place:
opt_subreg_zext_lo32_rnd_hi32 is called _after_ fixup_bpf_calls.
Differences v2->v3[1]:
- Moved patching into fixup_bpf_calls (patch incoming to rename this function)
- Added extra commentary on bpf_jit_needs_zext
- Added check to avoid adding a pointless zext(r0) if there's already one there.
Difference v1->v2[1]: Now solved centrally in the verifier instead of
specifically for the x86 JIT. Thanks to Ilya and Daniel for the suggestions!
[1] v5: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
v4: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
v3: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
v2: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
v1: https://lore.kernel.org/bpf/d7ebaefb-bfd6-a441-3ff2-2fdfe699b1d2@iogearbox.net/T/#t
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Fixes: 5ffa25502b ("bpf: Add instructions for atomic_[cmp]xchg")
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that blackhole nexthops are not flushed when the loopback device
goes down.
Output without previous patch:
# ./fib_nexthops.sh -t basic
Basic functional tests
----------------------
TEST: List with nothing defined [ OK ]
TEST: Nexthop get on non-existent id [ OK ]
TEST: Nexthop with no device or gateway [ OK ]
TEST: Nexthop with down device [ OK ]
TEST: Nexthop with device that is linkdown [ OK ]
TEST: Nexthop with device only [ OK ]
TEST: Nexthop with duplicate id [ OK ]
TEST: Blackhole nexthop [ OK ]
TEST: Blackhole nexthop with other attributes [ OK ]
TEST: Blackhole nexthop with loopback device down [FAIL]
TEST: Create group [ OK ]
TEST: Create group with blackhole nexthop [FAIL]
TEST: Create multipath group where 1 path is a blackhole [ OK ]
TEST: Multipath group can not have a member replaced by blackhole [ OK ]
TEST: Create group with non-existent nexthop [ OK ]
TEST: Create group with same nexthop multiple times [ OK ]
TEST: Replace nexthop with nexthop group [ OK ]
TEST: Replace nexthop group with nexthop [ OK ]
TEST: Nexthop group and device [ OK ]
TEST: Test proto flush [ OK ]
TEST: Nexthop group and blackhole [ OK ]
Tests passed: 19
Tests failed: 2
Output with previous patch:
# ./fib_nexthops.sh -t basic
Basic functional tests
----------------------
TEST: List with nothing defined [ OK ]
TEST: Nexthop get on non-existent id [ OK ]
TEST: Nexthop with no device or gateway [ OK ]
TEST: Nexthop with down device [ OK ]
TEST: Nexthop with device that is linkdown [ OK ]
TEST: Nexthop with device only [ OK ]
TEST: Nexthop with duplicate id [ OK ]
TEST: Blackhole nexthop [ OK ]
TEST: Blackhole nexthop with other attributes [ OK ]
TEST: Blackhole nexthop with loopback device down [ OK ]
TEST: Create group [ OK ]
TEST: Create group with blackhole nexthop [ OK ]
TEST: Create multipath group where 1 path is a blackhole [ OK ]
TEST: Multipath group can not have a member replaced by blackhole [ OK ]
TEST: Create group with non-existent nexthop [ OK ]
TEST: Create group with same nexthop multiple times [ OK ]
TEST: Replace nexthop with nexthop group [ OK ]
TEST: Replace nexthop group with nexthop [ OK ]
TEST: Nexthop group and device [ OK ]
TEST: Test proto flush [ OK ]
TEST: Nexthop group and blackhole [ OK ]
Tests passed: 21
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull KVM fixes from Paolo Bonzini:
- Doc fixes
- selftests fixes
- Add runstate information to the new Xen support
- Allow compiling out the Xen interface
- 32-bit PAE without EPT bugfix
- NULL pointer dereference bugfix
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Clear the CR4 register on reset
KVM: x86/xen: Add support for vCPU runstate information
KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_info
selftests: kvm: Mmap the entire vcpu mmap area
KVM: Documentation: Fix index for KVM_CAP_PPC_DAWR1
KVM: x86: allow compiling out the Xen hypercall interface
KVM: xen: flush deferred static key before checking it
KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled
KVM: x86: hyper-v: Fix Hyper-V context null-ptr-deref
KVM: x86: remove misplaced comment on active_mmu_pages
KVM: Documentation: rectify rst markup in kvm_run->flags
Documentation: kvm: fix messy conversion from .txt to .rst
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vcpu mmap area may consist of more than just the kvm_run struct.
Allocate enough space for the entire vcpu mmap area. Without this, on
x86, the PIO page, for example, will be missing. This is problematic
when dealing with an unhandled exception from the guest as the exception
vector will be incorrectly reported as 0x0.
Message-Id: <20210210165035.3712489-1-aaronlewis@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Co-developed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The verifier test labelled "valid read map access into a read-only array
2" calls the bpf_csum_diff() helper and checks its return value. However,
architecture implementations of csum_partial() (which is what the helper
uses) differ in whether they fold the return value to 16 bit or not. For
example, x86 version has ...
if (unlikely(odd)) {
result = from32to16(result);
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
}
... while generic lib/checksum.c does:
result = from32to16(result);
if (odd)
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
This makes the helper return different values on different architectures,
breaking the test on non-x86. To fix this, add an additional instruction
to always mask the return value to 16 bits, and update the expected return
value accordingly.
Fixes: fb2abb73e5 ("bpf, selftest: test {rd, wr}only flags and direct value access")
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210228103017.320240-1-yauheni.kaliuta@redhat.com
Convert Antonio Ojeas bug reproducer to a kselftest.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent, so that it is
always valid.
Fixes: b5b029399f ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-02-26
1) Fix for bpf atomic insns with src_reg=r0, from Brendan.
2) Fix use after free due to bpf_prog_clone, from Cong.
3) Drop imprecise verifier log message, from Dmitrii.
4) Remove incorrect blank line in bpf helper description, from Hangbin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: No need to drop the packet when there is no geneve opt
bpf: Remove blank line in bpf helper description comment
tools/resolve_btfids: Fix build error with older host toolchains
selftests/bpf: Fix a compiler warning in global func test
bpf: Drop imprecise log message
bpf: Clear percpu pointers in bpf_prog_clone_free()
bpf: Fix a warning message in mark_ptr_not_null_reg()
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================
Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more KVM updates from Paolo Bonzini:
"x86:
- take into account HVA before retrying on MMU notifier race
- fixes for nested AMD guests without NPT
- allow INVPCID in guest without PCID
- disable PML in hardware when not in use
- MMU code cleanups:
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: SVM: Fix nested VM-Exit on #GP interception handling
KVM: vmx/pmu: Fix dummy check if lbr_desc->event is created
KVM: x86/mmu: Consider the hva in mmu_notifier retry
KVM: x86/mmu: Skip mmu_notifier check when handling MMIO page fault
KVM: Documentation: rectify rst markup in KVM_GET_SUPPORTED_HV_CPUID
KVM: nSVM: prepare guest save area while is_guest_mode is true
KVM: x86/mmu: Remove a variety of unnecessary exports
KVM: x86: Fold "write-protect large" use case into generic write-protect
KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PML
KVM: VMX: Dynamically enable/disable PML based on memslot dirty logging
KVM: x86: Further clarify the logic and comments for toggling log dirty
KVM: x86: Move MMU's PML logic to common code
KVM: x86/mmu: Make dirty log size hook (PML) a value, not a function
KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect()
KVM: nVMX: Disable PML in hardware when running L2
KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs
KVM: x86/mmu: Pass the memslot to the rmap callbacks
KVM: x86/mmu: Split out max mapping level calculation to helper
KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages
KVM: nVMX: no need to undo inject_page_fault change on nested vmexit
...
Pull networking fixes from Jakub Kicinski:
"Rather small batch this time.
Current release - regressions:
- bcm63xx_enet: fix sporadic kernel panic due to queue length
mis-accounting
Current release - new code bugs:
- bcm4908_enet: fix RX path possible mem leak
- bcm4908_enet: fix NAPI poll returned value
- stmmac: fix missing spin_lock_init in visconti_eth_dwmac_probe()
- sched: cls_flower: validate ct_state for invalid and reply flags
Previous releases - regressions:
- net: introduce CAN specific pointer in the struct net_device to
prevent mis-interpreting memory
- phy: micrel: set soft_reset callback to genphy_soft_reset for
KSZ8081
- psample: fix netlink skb length with tunnel info
Previous releases - always broken:
- icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending
- wireguard: device: do not generate ICMP for non-IP packets
- mptcp: provide subflow aware release function to avoid a mem leak
- hsr: add support for EntryForgetTime
- r8169: fix jumbo packet handling on RTL8168e
- octeontx2-af: fix an off by one in rvu_dbg_qsize_write()
- i40e: fix flow for IPv6 next header (extension header)
- phy: icplus: call phy_restore_page() when phy_select_page() fails
- dpaa_eth: fix the access method for the dpaa_napi_portal"
* tag 'net-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
r8169: fix jumbo packet handling on RTL8168e
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081
net: psample: Fix netlink skb length with tunnel info
net: broadcom: bcm4908_enet: fix NAPI poll returned value
net: broadcom: bcm4908_enet: fix RX path possible mem leak
net: hsr: add support for EntryForgetTime
net: dsa: sja1105: Remove unneeded cast in sja1105_crc32()
ibmvnic: fix a race between open and reset
net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe()
net: introduce CAN specific pointer in the struct net_device
net: usb: qmi_wwan: support ZTE P685M modem
wireguard: kconfig: use arm chacha even with no neon
wireguard: queueing: get rid of per-peer ring buffers
wireguard: device: do not generate ICMP for non-IP packets
wireguard: peer: put frequently used members above cache lines
wireguard: selftests: test multiple parallel streams
wireguard: socket: remove bogus __be32 annotation
wireguard: avoid double unlikely() notation when using IS_ERR()
net: qrtr: Fix memory leak in qrtr_tun_open
vxlan: move debug check after netdev unregister
...
In bpf geneve tunnel test we set geneve option on tx side. On rx side we
only call bpf_skb_get_tunnel_opt(). Since commit 9c2e14b481 ("ip_tunnels:
Set tunnel option flag when tunnel metadata is present") geneve_rx() will
not add TUNNEL_GENEVE_OPT flag if there is no geneve option, which cause
bpf_skb_get_tunnel_opt() return ENOENT and _geneve_get_tunnel() in
test_tunnel_kern.c drop the packet.
As it should be valid that bpf_skb_get_tunnel_opt() return error when
there is not tunnel option, there is no need to drop the packet and
break all geneve rx traffic. Just set opt_class to 0 in this test and
keep returning TC_ACT_OK.
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/bpf/20210224081403.1425474-1-liuhangbin@gmail.com
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
