Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
Pull SELinux updates from Paul Moore:
"Six SELinux patches, all are simple and easily understood, but a list
of the highlights is below:
- Use 'grep -E' instead of 'egrep' in the SELinux policy install
script.
Fun fact, this seems to be GregKH's *second* dedicated SELinux
patch since we transitioned to git (ignoring merges, the SPDX
stuff, and a trivial fs reference removal when lustre was yanked);
the first was back in 2011 when selinuxfs was placed in
/sys/fs/selinux. Oh, the memories ...
- Convert the SELinux policy boolean values to use signed integer
types throughout the SELinux kernel code.
Prior to this we were using a mix of signed and unsigned integers
which was probably okay in this particular case, but it is
definitely not a good idea in general.
- Remove a reference to the SELinux runtime disable functionality in
/etc/selinux/config as we are in the process of deprecating that.
See [1] for more background on this if you missed the previous
notes on the deprecation.
- Minor cleanups: remove unneeded variables and function parameter
constification"
Link: https://github.com/SELinuxProject/selinux-kernel/wiki/DEPRECATE-runtime-disable [1]
* tag 'selinux-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: remove runtime disable message in the install_policy.sh script
selinux: use "grep -E" instead of "egrep"
selinux: remove the unneeded result variable
selinux: declare read-only parameters const
selinux: use int arrays for boolean values
selinux: remove an unneeded variable in sel_make_class_dir_entries()
Pull kernel hardening updates from Kees Cook:
"Most of the collected changes here are fixes across the tree for
various hardening features (details noted below).
The most notable new feature here is the addition of the memcpy()
overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step
on the path to killing the common class of "trivially detectable"
buffer overflow conditions (i.e. on arrays with sizes known at compile
time) that have resulted in many exploitable vulnerabilities over the
years (e.g. BleedingTooth).
This feature is expected to still have some undiscovered false
positives. It's been in -next for a full development cycle and all the
reported false positives have been fixed in their respective trees.
All the known-bad code patterns we could find with Coccinelle are also
either fixed in their respective trees or in flight.
The commit message in commit 54d9469bc5 ("fortify: Add run-time WARN
for cross-field memcpy()") for the feature has extensive details, but
I'll repeat here that this is a warning _only_, and is not intended to
actually block overflows (yet). The many patches fixing array sizes
and struct members have been landing for several years now, and we're
finally able to turn this on to find any remaining stragglers.
Summary:
Various fixes across several hardening areas:
- loadpin: Fix verity target enforcement (Matthias Kaehlcke).
- zero-call-used-regs: Add missing clobbers in paravirt (Bill
Wendling).
- CFI: clean up sparc function pointer type mismatches (Bart Van
Assche).
- Clang: Adjust compiler flag detection for various Clang changes
(Sami Tolvanen, Kees Cook).
- fortify: Fix warnings in arch-specific code in sh, ARM, and xen.
Improvements to existing features:
- testing: improve overflow KUnit test, introduce fortify KUnit test,
add more coverage to LKDTM tests (Bart Van Assche, Kees Cook).
- overflow: Relax overflow type checking for wider utility.
New features:
- string: Introduce strtomem() and strtomem_pad() to fill a gap in
strncpy() replacement needs.
- um: Enable FORTIFY_SOURCE support.
- fortify: Enable run-time struct member memcpy() overflow warning"
* tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits)
Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
sparc: Unbreak the build
x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled
x86/paravirt: clean up typos and grammaros
fortify: Convert to struct vs member helpers
fortify: Explicitly check bounds are compile-time constants
x86/entry: Work around Clang __bdos() bug
ARM: decompressor: Include .data.rel.ro.local
fortify: Adjust KUnit test for modular build
sh: machvec: Use char[] for section boundaries
kunit/memcpy: Avoid pathological compile-time string size
lib: Improve the is_signed_type() kunit test
LoadPin: Require file with verity root digests to have a header
dm: verity-loadpin: Only trust verity targets with enforcement
LoadPin: Fix Kconfig doc about format of file with verity digests
um: Enable FORTIFY_SOURCE
lkdtm: Update tests for memcpy() run-time warnings
fortify: Add run-time WARN for cross-field memcpy()
fortify: Use SIZE_MAX instead of (size_t)-1
...
Pull kcfi updates from Kees Cook:
"This replaces the prior support for Clang's standard Control Flow
Integrity (CFI) instrumentation, which has required a lot of special
conditions (e.g. LTO) and work-arounds.
The new implementation ("Kernel CFI") is specific to C, directly
designed for the Linux kernel, and takes advantage of architectural
features like x86's IBT. This series retains arm64 support and adds
x86 support.
GCC support is expected in the future[1], and additional "generic"
architectural support is expected soon[2].
Summary:
- treewide: Remove old CFI support details
- arm64: Replace Clang CFI support with Clang KCFI support
- x86: Introduce Clang KCFI support"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107048 [1]
Link: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic [2]
* tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
x86: Add support for CONFIG_CFI_CLANG
x86/purgatory: Disable CFI
x86: Add types to indirectly called assembly functions
x86/tools/relocs: Ignore __kcfi_typeid_ relocations
kallsyms: Drop CONFIG_CFI_CLANG workarounds
objtool: Disable CFI warnings
objtool: Preserve special st_shndx indexes in elf_update_symbol
treewide: Drop __cficanonical
treewide: Drop WARN_ON_FUNCTION_MISMATCH
treewide: Drop function_nocfi
init: Drop __nocfi from __init
arm64: Drop unneeded __nocfi attributes
arm64: Add CFI error handling
arm64: Add types to indirect called assembly functions
psci: Fix the function type for psci_initcall_t
lkdtm: Emit an indirect call for CFI tests
cfi: Add type helper macros
cfi: Switch to -fsanitize=kcfi
cfi: Drop __CFI_ADDRESSABLE
cfi: Remove CONFIG_CFI_CLANG_SHADOW
...
Pull Rust introductory support from Kees Cook:
"The tree has a recent base, but has fundamentally been in linux-next
for a year and a half[1]. It's been updated based on feedback from the
Kernel Maintainer's Summit, and to gain recent Reviewed-by: tags.
Miguel is the primary maintainer, with me helping where needed/wanted.
Our plan is for the tree to switch to the standard non-rebasing
practice once this initial infrastructure series lands.
The contents are the absolute minimum to get Rust code building in the
kernel, with many more interfaces[2] (and drivers - NVMe[3], 9p[4], M1
GPU[5]) on the way.
The initial support of Rust-for-Linux comes in roughly 4 areas:
- Kernel internals (kallsyms expansion for Rust symbols, %pA format)
- Kbuild infrastructure (Rust build rules and support scripts)
- Rust crates and bindings for initial minimum viable build
- Rust kernel documentation and samples
Rust support has been in linux-next for a year and a half now, and the
short log doesn't do justice to the number of people who have
contributed both to the Linux kernel side but also to the upstream
Rust side to support the kernel's needs. Thanks to these 173 people,
and many more, who have been involved in all kinds of ways:
Miguel Ojeda, Wedson Almeida Filho, Alex Gaynor, Boqun Feng, Gary Guo,
Björn Roy Baron, Andreas Hindborg, Adam Bratschi-Kaye, Benno Lossin,
Maciej Falkowski, Finn Behrens, Sven Van Asbroeck, Asahi Lina, FUJITA
Tomonori, John Baublitz, Wei Liu, Geoffrey Thomas, Philip Herron,
Arthur Cohen, David Faust, Antoni Boucher, Philip Li, Yujie Liu,
Jonathan Corbet, Greg Kroah-Hartman, Paul E. McKenney, Josh Triplett,
Kent Overstreet, David Gow, Alice Ryhl, Robin Randhawa, Kees Cook,
Nick Desaulniers, Matthew Wilcox, Linus Walleij, Joe Perches, Michael
Ellerman, Petr Mladek, Masahiro Yamada, Arnaldo Carvalho de Melo,
Andrii Nakryiko, Konstantin Shelekhin, Rasmus Villemoes, Konstantin
Ryabitsev, Stephen Rothwell, Andy Shevchenko, Sergey Senozhatsky, John
Paul Adrian Glaubitz, David Laight, Nathan Chancellor, Jonathan
Cameron, Daniel Latypov, Shuah Khan, Brendan Higgins, Julia Lawall,
Laurent Pinchart, Geert Uytterhoeven, Akira Yokosawa, Pavel Machek,
David S. Miller, John Hawley, James Bottomley, Arnd Bergmann,
Christian Brauner, Dan Robertson, Nicholas Piggin, Zhouyi Zhou, Elena
Zannoni, Jose E. Marchesi, Leon Romanovsky, Will Deacon, Richard
Weinberger, Randy Dunlap, Paolo Bonzini, Roland Dreier, Mark Brown,
Sasha Levin, Ted Ts'o, Steven Rostedt, Jarkko Sakkinen, Michal
Kubecek, Marco Elver, Al Viro, Keith Busch, Johannes Berg, Jan Kara,
David Sterba, Connor Kuehl, Andy Lutomirski, Andrew Lunn, Alexandre
Belloni, Peter Zijlstra, Russell King, Eric W. Biederman, Willy
Tarreau, Christoph Hellwig, Emilio Cobos Álvarez, Christian Poveda,
Mark Rousskov, John Ericson, TennyZhuang, Xuanwo, Daniel Paoliello,
Manish Goregaokar, comex, Josh Stone, Stephan Sokolow, Philipp Krones,
Guillaume Gomez, Joshua Nelson, Mats Larsen, Marc Poulhiès, Samantha
Miller, Esteban Blanc, Martin Schmidt, Martin Rodriguez Reboredo,
Daniel Xu, Viresh Kumar, Bartosz Golaszewski, Vegard Nossum, Milan
Landaverde, Dariusz Sosnowski, Yuki Okushi, Matthew Bakhtiari, Wu
XiangCheng, Tiago Lam, Boris-Chengbiao Zhou, Sumera Priyadarsini,
Viktor Garske, Niklas Mohrin, Nándor István Krácser, Morgan Bartlett,
Miguel Cano, Léo Lanteri Thauvin, Julian Merkle, Andreas Reindl,
Jiapeng Chong, Fox Chen, Douglas Su, Antonio Terceiro, SeongJae Park,
Sergio González Collado, Ngo Iok Ui (Wu Yu Wei), Joshua Abraham,
Milan, Daniel Kolsoi, ahomescu, Manas, Luis Gerhorst, Li Hongyu,
Philipp Gesang, Russell Currey, Jalil David Salamé Messina, Jon Olson,
Raghvender, Angelos, Kaviraj Kanagaraj, Paul Römer, Sladyn Nunes,
Mauro Baladés, Hsiang-Cheng Yang, Abhik Jain, Hongyu Li, Sean Nash,
Yuheng Su, Peng Hao, Anhad Singh, Roel Kluin, Sara Saa, Geert
Stappers, Garrett LeSage, IFo Hancroft, and Linus Torvalds"
Link: https://lwn.net/Articles/849849/ [1]
Link: https://github.com/Rust-for-Linux/linux/commits/rust [2]
Link: https://github.com/metaspace/rust-linux/commit/d88c3744d6cbdf11767e08bad56cbfb67c4c96d0 [3]
Link: https://github.com/wedsonaf/linux/commit/9367032607f7670de0ba1537cf09ab0f4365a338 [4]
Link: https://github.com/AsahiLinux/linux/commits/gpu/rust-wip [5]
* tag 'rust-v6.1-rc1' of https://github.com/Rust-for-Linux/linux: (27 commits)
MAINTAINERS: Rust
samples: add first Rust examples
x86: enable initial Rust support
docs: add Rust documentation
Kbuild: add Rust support
rust: add `.rustfmt.toml`
scripts: add `is_rust_module.sh`
scripts: add `rust_is_available.sh`
scripts: add `generate_rust_target.rs`
scripts: add `generate_rust_analyzer.py`
scripts: decode_stacktrace: demangle Rust symbols
scripts: checkpatch: enable language-independent checks for Rust
scripts: checkpatch: diagnose uses of `%pA` in the C side as errors
vsprintf: add new `%pA` format specifier
rust: export generated symbols
rust: add `kernel` crate
rust: add `bindings` crate
rust: add `macros` crate
rust: add `compiler_builtins` crate
rust: adapt `alloc` crate to the kernel
...
Pull documentation updates from Jonathan Corbet:
"There's not a huge amount of activity in the docs tree this time
around, but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The
hope is that the new organization will be a friendlier starting
point for both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates"
* tag 'docs-6.1' of git://git.lwn.net/linux: (66 commits)
checkpatch: warn on usage of VM_BUG_ON() and other BUG variants
coding-style.rst: document BUG() and WARN() rules ("do not crash the kernel")
Documentation: devres: add missing IO helper
Documentation: devres: update IRQ helper
Documentation/mm: modify page_referenced to folio_referenced
Documentation/CoC: Reflect current CoC interpretation and practices
docs/doc-guide: Add documentation on SPHINX_IMGMATH
docs: process/5.Posting.rst: clarify use of Reported-by: tag
docs, kprobes: Fix the wrong location of Kprobes
docs: add a man-pages link to the front page
docs: put atomic*.txt and memory-barriers.txt into the core-api book
docs: move asm-annotations.rst into core-api
docs: remove some index.rst cruft
docs: reconfigure the HTML left column
docs: Rewrite the front page
docs: promote the title of process/index.rst
Documentation: devres: add missing SPI helper
Documentation: devres: add missing PINCTRL helpers
docs: hugetlbpage.rst: fix a typo of hugepage size
docs/zh_CN: Add new translation of admin-guide/bootconfig.rst
...
checkpatch does not point out that VM_BUG_ON() and friends should be
avoided, however, Linus notes:
VM_BUG_ON() has the exact same semantics as BUG_ON. It is literally
no different, the only difference is "we can make the code smaller
because these are less important". [1]
So let's warn on VM_BUG_ON() and other BUG variants as well. While at it,
make it clearer that the kernel really shouldn't be crashed.
As there are some subsystem BUG macros that actually don't end up crashing
the kernel -- for example, KVM_BUG_ON() -- exclude these manually.
[1] https://lore.kernel.org/r/CAHk-=wg40EAZofO16Eviaj7mfqDhZ2gVEbvfsMf6gYzspRjYvw@mail.gmail.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20220923113426.52871-3-david@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This script tests whether the Rust toolchain requirements are in place
to enable Rust support. It uses `min-tool-version.sh` to fetch
the version numbers.
The build system will call it to set `CONFIG_RUST_IS_AVAILABLE` in
a later patch.
It also has an option (`-v`) to explain what is missing, which is
useful to set up the development environment. This is used via
the `make rustavailable` target added in a later patch.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Miguel Cano <macanroj@gmail.com>
Signed-off-by: Miguel Cano <macanroj@gmail.com>
Co-developed-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This script takes care of generating the custom target specification
file for `rustc`, based on the kernel configuration.
It also serves as an example of a Rust host program.
A dummy architecture is kept in this patch so that a later patch
adds x86 support on top with as few changes as possible.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Include Rust in the "source code files" category, so that
the language-independent tests are checked for Rust too,
and teach `checkpatch` about the comment style for Rust files.
This enables the malformed SPDX check, the misplaced SPDX license
tag check, the long line checks, the lines without a newline check
and the embedded filename check.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `%pA` format specifier is only intended to be used from Rust.
`checkpatch.pl` already gives a warning for invalid specificers:
WARNING: Invalid vsprintf pointer extension '%pA'
This makes it an error and introduces an explanatory message:
ERROR: Invalid vsprintf pointer extension '%pA' - '%pA' is only intended to be used from Rust code
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Joe Perches <joe@perches.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc. For instance,
the following code:
pub mod my_module {
pub struct MyType;
pub struct MyGenericType<T>(T);
pub trait MyTrait {
fn my_method() -> u32;
}
impl MyTrait for MyGenericType<MyType> {
fn my_method() -> u32 {
42
}
}
}
generates a symbol of length 96 when using the upcoming v0 mangling scheme:
_RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method
At the moment, Rust symbols may reach up to 300 in length.
Setting 512 as the maximum seems like a reasonable choice to
keep some headroom.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc.
Increasing to 255 is not enough in some cases, therefore
introduce longer lengths to the symbol table.
In order to avoid increasing all lengths to 2 bytes (since most
of them are small, including many Rust ones), use ULEB128 to
keep smaller symbols in 1 byte, with the rest in 2 bytes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This adds a static assert to ensure `KSYM_NAME_LEN_BUFFER`
gets updated when `KSYM_NAME_LEN` changes.
The relationship used is one that keeps the new size (512+1)
close to the original buffer size (500).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This introduces `KSYM_NAME_LEN_BUFFER` in place of the previously
hardcoded size of the input buffer.
It will also make it easier to update the size in a single place
in a later patch.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Linus Torvalds
Sami Tolvanen
Jakub Kicinski
David Hildenbrand
Jonathan Corbet
Miguel Ojeda
Daniel Xu
Boqun Feng