pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it:
1) Replacing it with pm_runtime_resume_and_get to keep usage counter
balanced.
2) Add putting operation before returning error.
Fixes:9135408c3ace4 ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220319022142.142709-1-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The bug is here:
__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);
The list iterator 'desc' will point to a bogus position containing
HEAD if the list is empty or no element is found. To avoid dev_dbg()
prints a invalid address, use a new variable 'iter' as the list
iterator, while use the origin variable 'desc' as a dedicated
pointer to point to the found element.
Cc: stable@vger.kernel.org
Fixes: 82e2424635 ("dmaengine: xdmac: fix print warning on dma_addr_t variable")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit b98ce2f4e3 ("dmaengine: imx-sdma: add uart rom script") broke
uart rx on imx5 when using sdma firmware from older Freescale 2.6.35
kernel. In this case reading addr->uartXX_2_mcu_addr was going out of
bounds of the firmware memory and corrupting the uart script addresses.
Simply adding a bounds check before accessing addr->uartXX_2_mcu_addr
does not work as the uartXX_2_mcu_addr members are now beyond the size
of the older firmware and the uart addresses would never be populated
in that case. There are other ways to fix this but overall the logic
seems clearer to me to revert the uartXX_2_mcu_ram_addr structure
entries back to uartXX_2_mcu_addr, change the newer entries to
uartXX_2_mcu_rom_addr and update the logic accordingly.
I have tested this patch on:
1. An i.MX53 system with sdma firmware from Freescale 2.6.35 kernel.
Without this patch uart rx is broken in this scenario, with the
patch uart rx is restored.
2. An i.MX6D system with no external sdma firmware. uart is okay with
or without this patch.
3. An i.MX8MM system using current sdma-imx7d.bin firmware from
linux-firmware. uart is okay with or without this patch and I
confirmed the rom version of the uart script is being used which was
the intention and reason for commit b98ce2f4e3 ("dmaengine:
imx-sdma: add uart rom script") in the first place.
Fixes: b98ce2f4e3 ("dmaengine: imx-sdma: add uart rom script")
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220410223118.15086-1-kgroeneveld@lenbrook.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"This time we have bunch of driver updates and some new device support.
New support:
- Document RZ/V2L and RZ/G2UL dma binding
- TI AM62x k3-udma and k3-psil support
Updates:
- Yaml conversion for Mediatek uart apdma schema
- Removal of DMA-32 fallback configuration for various drivers
- imx-sdma updates for channel restart"
* tag 'dmaengine-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
dmaengine: dw-axi-dmac: cleanup comments
dmaengine: fsl-dpaa2-qdma: Drop comma after SoC match table sentinel
dt-bindings: dma: Convert mtk-uart-apdma to DT schema
dmaengine: ppc4xx: Make use of the helper macro LIST_HEAD()
dmaengine: idxd: Remove useless DMA-32 fallback configuration
dmaengine: qcom_hidma: Remove useless DMA-32 fallback configuration
dmaengine: sh: Kconfig: Add ARCH_R9A07G054 dependency for RZ_DMAC config option
dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data
dmaengine: ti: k3-udma: Add AM62x DMSS support
dmaengine: ti: cleanup comments
dmaengine: imx-sdma: clean up some inconsistent indenting
dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
dmaengine: idxd: restore traffic class defaults after wq reset
dmaengine: altera-msgdma: Remove useless DMA-32 fallback configuration
dmaengine: stm32-dma: set dma_device max_sg_burst
dmaengine: imx-sdma: fix cyclic buffer race condition
dmaengine: imx-sdma: restart cyclic channel if needed
dmaengine: iot: Remove useless DMA-32 fallback configuration
dmaengine: ptdma: handle the cases based on DMA is complete
...
Pull MIPS updates from Thomas Bogendoerfer:
- added support for QCN550x (ath79)
- enabled KCSAN
- removed TX39XX support
- various cleanups and fixes
* tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits)
MIPS: Fix build error for loongson64 and sgi-ip27
MIPS: ingenic: correct unit node address
MIPS: Fix wrong comments in asm/prom.h
MIPS: Remove redundant definitions of device_tree_init()
MIPS: Remove redundant check in device_tree_init()
MIPS: pgalloc: fix memory leak caused by pgd_free()
MIPS: RB532: fix return value of __setup handler
MIPS: Only use current_stack_pointer on GCC
MIPS: boot/compressed: Use array reference for image bounds
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
mips: remove reference to "newer Loongson-3"
mips: Always permit to build u-boot images
MIPS: Sanitise Cavium switch cases in TLB handler synthesizers
DEC: Limit PMAX memory probing to R3k systems
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
MIPS: fix fortify panic when copying asm exception handlers
mips: ralink: fix a refcount leak in ill_acc_of_setup()
mips: Implement "current_stack_pointer"
MIPS: Remove TX39XX support
MIPS: Modernize READ_IMPLIES_EXEC
...
Pull ARM updates from Russell King:
- amba bus cleanups
- conversion to use reserve_initrd_mem()
- remove -nostdlib from vdso link
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9181/1: vdso: remove -nostdlib compiler flag
ARM: 9175/1: Convert to reserve_initrd_mem()
ARM: 9174/1: amba: Move EXPORT_SYMBOL() closer to definition
ARM: 9173/1: amba: kill amba_find_match()
ARM: 9172/1: amba: Cleanup amba pclk operation
Remove the loaded hisi_dma driver and reload it, the driver fails
to work properly. The following error is reported in the kernel log:
[ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors!
[ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28
As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI
interrupt must be a power of two. The Kunpeng DMA driver allocates 30
MSI interrupts. As a result, no space left on device is reported
when the driver is reloaded and allocates interrupt vectors from the
interrupt domain.
This patch changes the number of interrupt vectors allocated by
hisi_dma driver to 32 to avoid this problem.
[1] https://www.kernel.org/doc/html/latest/PCI/msi-howto.html
Fixes: e9f08b6525 ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20220216072101.34473-1-haijie1@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Dave Jiang
Jiapeng Chong
Herve Codina
zhangqilong
Miaoqian Lin
Xiaomeng Tong
Kevin Groeneveld
Linus Torvalds
Jie Hai
Tom Rix
Geert Uytterhoeven
Cai Huoqing
Christophe JAILLET
Lad Prabhakar
Vignesh Raghavendra