Add the attributes needed to report cable test results to userspace.
The reports are expected to be per twisted pair. A nested property per
pair can report the result of the cable test. A nested property can
also report the length of the cable to any fault.
v2:
Grammar fixes
Change length from u16 to u32
s/DEV/HEADER/g
Add status attributes
Rename pairs from numbers to letters.
v3:
Fixed example in document
Add ETHTOOL_A_CABLE_NEST_* enum
Add ETHTOOL_MSG_CABLE_TEST_NTF to documentation
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new ethtool netlink calls to trigger the starting of a PHY cable
test.
Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when
ETHTOOL_NETLINK is builtin, which would result in kernel linking errors.
v2:
Remove unwanted white space change
Remove ethnl_cable_test_act_ops and use doit handler
Rename cable_test_set_policy cable_test_act_policy
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY
v3:
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation
Remove unused cable_test_get_policy
Add Reviewed-by tags
v4:
Remove unwanted blank line
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of
auto-negotiation support, we needed to be able to configure the
MASTER-SLAVE role of the port manually or from an application in user
space.
The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to
force MASTER or SLAVE role. See IEEE 802.3-2018:
22.2.4.3.7 MASTER-SLAVE control register (Register 9)
22.2.4.3.8 MASTER-SLAVE status register (Register 10)
40.5.2 MASTER-SLAVE configuration resolution
45.2.1.185.1 MASTER-SLAVE config value (1.2100.14)
45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32)
The MASTER-SLAVE role affects the clock configuration:
-------------------------------------------------------------------------------
When the PHY is configured as MASTER, the PMA Transmit function shall
source TX_TCLK from a local clock source. When configured as SLAVE, the
PMA Transmit function shall source TX_TCLK from the clock recovered from
data stream provided by MASTER.
iMX6Q KSZ9031 XXX
------\ /-----------\ /------------\
| | | | |
MAC |<----RGMII----->| PHY Slave |<------>| PHY Master |
|<--- 125 MHz ---+-<------/ | | \ |
------/ \-----------/ \------------/
^
\-TX_TCLK
-------------------------------------------------------------------------------
Since some clock or link related issues are only reproducible in a
specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial
to provide generic (not 100BASE-T1 specific) interface to the user space
for configuration flexibility and trouble shooting.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
QUIC servers would like to use SO_TXTIME, without having CAP_NET_ADMIN,
to efficiently pace UDP packets.
As far as sch_fq is concerned, we need to add safety checks, so
that a buggy application does not fill the qdisc with packets
having delivery time far in the future.
This patch adds a configurable horizon (default: 10 seconds),
and a configurable policy when a packet is beyond the horizon
at enqueue() time:
- either drop the packet (default policy)
- or cap its delivery time to the horizon.
$ tc -s -d qd sh dev eth0
qdisc fq 8022: root refcnt 257 limit 10000p flow_limit 100p buckets 1024
orphan_mask 1023 quantum 10Kb initial_quantum 51160b low_rate_threshold 550Kbit
refill_delay 40.0ms timer_slack 10.000us horizon 10.000s
Sent 1234215879 bytes 837099 pkt (dropped 21, overlimits 0 requeues 6)
backlog 0b 0p requeues 6
flows 1191 (inactive 1177 throttled 0)
gc 0 highprio 0 throttled 692 latency 11.480us
pkts_too_long 0 alloc_errors 0 horizon_drops 21 horizon_caps 0
v2: fixed an overflow on 32bit kernels in fq_init(), reported
by kbuild test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These structures can get embedded in other structures in user-space
and cause all sorts of warnings and problems. So, we better don't take
any chances and keep the zero-length arrays in place for now.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Add adjust_phase to ptp_clock_caps capability to allow
user to query if a PHC driver supports adjust phase with
ioctl PTP_CLOCK_GETCAPS command.
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-01 (v2)
The following pull-request contains BPF updates for your *net-next* tree.
We've added 61 non-merge commits during the last 6 day(s) which contain
a total of 153 files changed, 6739 insertions(+), 3367 deletions(-).
The main changes are:
1) pulled work.sysctl from vfs tree with sysctl bpf changes.
2) bpf_link observability, from Andrii.
3) BTF-defined map in map, from Andrii.
4) asan fixes for selftests, from Andrii.
5) Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH, from Jakub.
6) production cloudflare classifier as a selftes, from Lorenz.
7) bpf_ktime_get_*_ns() helper improvements, from Maciej.
8) unprivileged bpftool feature probe, from Quentin.
9) BPF_ENABLE_STATS command, from Song.
10) enable bpf_[gs]etsockopt() helpers for sock_ops progs, from Stanislav.
11) enable a bunch of common helpers for cg-device, sysctl, sockopt progs,
from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a ingress frame gate control flow action.
Tc gate action does the work like this:
Assume there is a gate allow specified ingress frames can be passed at
specific time slot, and be dropped at specific time slot. Tc filter
chooses the ingress frames, and tc gate action would specify what slot
does these frames can be passed to device and what time slot would be
dropped.
Tc gate action would provide an entry list to tell how much time gate
keep open and how much time gate keep state close. Gate action also
assign a start time to tell when the entry list start. Then driver would
repeat the gate entry list cyclically.
For the software simulation, gate action requires the user assign a time
clock type.
Below is the setting example in user space. Tc filter a stream source ip
address is 192.168.0.20 and gate action own two time slots. One is last
200ms gate open let frame pass another is last 100ms gate close let
frames dropped. When the ingress frames have reach total frames over
8000000 bytes, the excessive frames will be dropped in that 200000000ns
time slot.
> tc qdisc add dev eth0 ingress
> tc filter add dev eth0 parent ffff: protocol ip \
flower src_ip 192.168.0.20 \
action gate index 2 clockid CLOCK_TAI \
sched-entry open 200000000 -1 8000000 \
sched-entry close 100000000 -1 -1
> tc chain del dev eth0 ingress chain 0
"sched-entry" follow the name taprio style. Gate state is
"open"/"close". Follow with period nanosecond. Then next item is internal
priority value means which ingress queue should put. "-1" means
wildcard. The last value optional specifies the maximum number of
MSDU octets that are permitted to pass the gate during the specified
time interval.
Base-time is not set will be 0 as default, as result start time would
be ((N + 1) * cycletime) which is the minimal of future time.
Below example shows filtering a stream with destination mac address is
10:00:80:00:00:00 and ip type is ICMP, follow the action gate. The gate
action would run with one close time slot which means always keep close.
The time cycle is total 200000000ns. The base-time would calculate by:
1357000000000 + (N + 1) * cycletime
When the total value is the future time, it will be the start time.
The cycletime here would be 200000000ns for this case.
> tc filter add dev eth0 parent ffff: protocol ip \
flower skip_hw ip_proto icmp dst_mac 10:00:80:00:00:00 \
action gate index 12 base-time 1357000000000 \
sched-entry close 200000000 -1 -1 \
clockid CLOCK_TAI
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, bpf_getsockopt and bpf_setsockopt helpers operate on the
'struct bpf_sock_ops' context in BPF_PROG_TYPE_SOCK_OPS program.
Let's generalize them and make them available for 'struct bpf_sock_addr'.
That way, in the future, we can allow those helpers in more places.
As an example, let's expose those 'struct bpf_sock_addr' based helpers to
BPF_CGROUP_INET{4,6}_CONNECT hooks. That way we can override CC before the
connection is made.
v3:
* Expose custom helpers for bpf_sock_addr context instead of doing
generic bpf_sock argument (as suggested by Daniel). Even with
try_socket_lock that doesn't sleep we have a problem where context sk
is already locked and socket lock is non-nestable.
v2:
* s/BPF_PROG_TYPE_CGROUP_SOCKOPT/BPF_PROG_TYPE_SOCK_OPS/
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200430233152.199403-1-sdf@google.com
Not much to be done here:
- add SPDX header;
- adjust title markup;
- remove a tail whitespace;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull drm fixes from Dave Airlie:
"Regular scheduled fixes for graphics. Nothing to extreme bunch of
amdgpu fixes, i915 and qxl fixes, along with some misc ones.
All seems to be progressing normally.
core:
- EDID off by one DTD fix
- DP mst write return code fix
dma-buf:
- fix SET_NAME ioctl uapi
- doc fixes
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
- (uapi) Add additional DCC tiling flags for navi1x
i915:
- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is
valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
qxl:
- use after gree fix
- fix lost kunmap
- release leak fix
virtio:
- context destruction fix"
* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
dma-buf: fix documentation build warnings
drm/qxl: qxl_release use after free
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
drm/i915: Use proper fault mask in interrupt postinstall too
drm/amd/display: Use cursor locking to prevent flip delays
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
drm/amd/display: Defer cursor update around VUPDATE for all ASIC
drm/amd/display: fix rn soc bb update
drm/amd/display: check if REFCLK_CNTL register is present
drm/amdgpu: bump version for invalidate L2 before SDMA IBs
drm/amdgpu: invalidate L2 before SDMA IBs (v2)
drm/amdgpu: add tiling flags from Mesa
drm/amd/powerplay: avoid using pm_en before it is initialized revised
Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
drm/virtio: only destroy created contexts
drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
drm/i915/gt: Check cacheline is valid before acquiring
drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
...
Currently, sysctl kernel.bpf_stats_enabled controls BPF runtime stats.
Typical userspace tools use kernel.bpf_stats_enabled as follows:
1. Enable kernel.bpf_stats_enabled;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Disable kernel.bpf_stats_enabled.
The problem with this approach is that only one userspace tool can toggle
this sysctl. If multiple tools toggle the sysctl at the same time, the
measurement may be inaccurate.
To fix this problem while keep backward compatibility, introduce a new
bpf command BPF_ENABLE_STATS. On success, this command enables stats and
returns a valid fd. BPF_ENABLE_STATS takes argument "type". Currently,
only one type, BPF_STATS_RUN_TIME, is supported. We can extend the
command to support other types of stats in the future.
With BPF_ENABLE_STATS, user space tool would have the following flow:
1. Get a fd with BPF_ENABLE_STATS, and make sure it is valid;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Close the fd.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200430071506.1408910-2-songliubraving@fb.com
Add, and use in generic netlink, helpers to dump out a netlink
policy to userspace, including all the range validation data,
nested policies etc.
This lets userspace discover what the kernel understands.
For families/commands other than generic netlink, the helpers
need to be used directly in an appropriate command, or we can
add some infrastructure (a new netlink family) that those can
register their policies with for introspection. I'm not that
familiar with non-generic netlink, so that's left out for now.
The data exposed to userspace also includes min and max length
for binary/string data, I've done that instead of letting the
userspace tools figure out whether min/max is intended based
on the type so that we can extend this later in the kernel, we
might want to just use the range data for example.
Because of this, I opted to not directly expose the NLA_*
values, even if some of them are already exposed via BPF, as
with min/max length we don't need to have different types here
for NLA_BINARY/NLA_MIN_LEN/NLA_EXACT_LEN, we just make them
all NL_ATTR_TYPE_BINARY with min/max length optionally set.
Similarly, we don't really need NLA_MSECS, and perhaps can
remove it in the future - but not if we encode it into the
userspace API now. It gets mapped to NL_ATTR_TYPE_U64 here.
Note that the exposing here corresponds to the strict policy
interpretation, and NLA_UNSPEC items are omitted entirely.
To get those, change them to NLA_MIN_LEN which behaves in
exactly the same way, but is exposed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- add SPDX header;
- add a document title;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds ability to filter sockets based on cgroup v2 ID.
Such filter is helpful in ss utility for filtering sockets by
cgroup pathname.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds cgroup v2 ID to common inet diag message attributes.
Cgroup v2 ID is kernfs ID (ino or ino+gen). This attribute allows filter
inet diag output by cgroup ID obtained by name_to_handle_at() syscall.
When net_cls or net_prio cgroup is activated this ID is equal to 1 (root
cgroup ID) for newly created sockets.
Some notes about this ID:
1) gets initialized in socket() syscall
2) incoming socket gets ID from listening socket
(not during accept() syscall)
3) not changed when process get moved to another cgroup
4) can point to deleted cgroup (refcounting)
v2:
- use CONFIG_SOCK_CGROUP_DATA instead if CONFIG_CGROUPS
v3:
- fix attr size by using nla_total_size_64bit() (Eric Dumazet)
- more detailed commit message (Konstantin Khlebnikov)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-By: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for nf-next:
1) Add IPS_HW_OFFLOAD status bit, from Bodong Wang.
2) Remove 128-bit limit on the set element data area, rise it
to 64 bytes.
3) Report EOPNOTSUPP for unsupported NAT types and flags.
4) Set up nft_nat flags from the control plane path.
5) Add helper functions to set up the nf_nat_range2 structure.
6) Add netmap support for nft_nat.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command.
Also enhance show_fdinfo to potentially include bpf_link type-specific
information (similarly to obj_info).
Also introduce enum bpf_link_type stored in bpf_link itself and expose it in
UAPI. bpf_link_tracing also now will store and return bpf_attach_type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com
Add support to look up bpf_link by ID and iterate over all existing bpf_links
in the system. GET_FD_BY_ID code handles not-yet-ready bpf_link by checking
that its ID hasn't been set to non-zero value yet. Setting bpf_link's ID is
done as the very last step in finalizing bpf_link, together with installing
FD. This approach allows users of bpf_link in kernel code to not worry about
races between user-space and kernel code that hasn't finished attaching and
initializing bpf_link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-4-andriin@fb.com
Generate ID for each bpf_link using IDR, similarly to bpf_map and bpf_prog.
bpf_link creation, initialization, attachment, and exposing to user-space
through FD and ID is a complicated multi-step process, abstract it away
through bpf_link_primer and bpf_link_prime(), bpf_link_settle(), and
bpf_link_cleanup() internal API. They guarantee that until bpf_link is
properly attached, user-space won't be able to access partially-initialized
bpf_link either from FD or ID. All this allows to simplify bpf_link attachment
and error handling code.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-3-andriin@fb.com
This patch allows you to NAT the network address prefix onto another
network address prefix, a.k.a. netmapping.
Userspace must specify the NF_NAT_RANGE_NETMAP flag and the prefix
address through the NFTA_NAT_REG_ADDR_MIN and NFTA_NAT_REG_ADDR_MAX
netlink attributes.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull Hyper-V fixes from Wei Liu:
- Two patches from Dexuan fixing suspension bugs
- Three cleanup patches from Andy and Michael
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyper-v: Remove internal types from UAPI header
hyper-v: Use UUID API for exporting the GUID
x86/hyperv: Suspend/resume the VP assist page for hibernation
Drivers: hv: Move AEOI determination to architecture dependent code
Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM
This patch adds a new port attribute, IFLA_BRPORT_MRP_RING_OPEN, which allows
to notify the userspace when the port lost the continuite of MRP frames.
This attribute is set by kernel whenever the SW or HW detects that the ring is
being open or closed.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn
David S. Miller
Oleksij Rempel
Eric Dumazet
Gustavo A. R. Silva
Vincent Cheng
Po Liu
Stanislav Fomichev
Mauro Carvalho Chehab
Linus Torvalds
Song Liu
Johannes Berg
Dave Airlie
Dmitry Yakunin
Andrii Nakryiko
Pablo Neira Ayuso
Horatiu Vultur