Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next
to extend ctnetlink and the flowtable infrastructure:
1) Extend ctnetlink kernel side netlink dump filtering capabilities,
from Romain Bellan.
2) Generalise the flowtable hook parser to take a hook list.
3) Pass a hook list to the flowtable hook registration/unregistration.
4) Add a helper function to release the flowtable hook list.
5) Update the flowtable event notifier to pass a flowtable hook list.
6) Allow users to add new devices to an existing flowtables.
7) Allow users to remove devices to an existing flowtables.
8) Allow for registering a flowtable with no initial devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This function schedules the flow teardown state and it forces a gc run.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conntrack dump does not support kernel side filtering (only get exists,
but it returns only one entry. And user has to give a full valid tuple)
It means that userspace has to implement filtering after receiving many
irrelevant entries, consuming resources (conntrack table is sometimes
very huge, much more than a routing table for example).
This patch adds filtering in kernel side. To achieve this goal, we:
* Add a new CTA_FILTER netlink attributes, actually a flag list to
parametize filtering
* Convert some *nlattr_to_tuple() functions, to allow a partial parsing
of CTA_TUPLE_ORIG and CTA_TUPLE_REPLY (so nf_conntrack_tuple it not
fully set)
Filtering is now possible on:
* IP SRC/DST values
* Ports for TCP and UDP flows
* IMCP(v6) codes types and IDs
Filtering is done as an "AND" operator. For example, when flags
PROTO_SRC_PORT, PROTO_NUM and IP_SRC are sets, only entries matching all
values are dumped.
Changes since v1:
Set NLM_F_DUMP_FILTERED in nlm flags if entries are filtered
Changes since v2:
Move several constants to nf_internals.h
Move a fix on netlink values check in a separate patch
Add a check on not-supported flags
Return EOPNOTSUPP if CDA_FILTER is set in ctnetlink_flush_conntrack
(not yet implemented)
Code style issues
Changes since v3:
Fix compilation warning reported by kbuild test robot
Changes since v4:
Fix a regression introduced in v3 (returned EINVAL for valid netlink
messages without CTA_MARK)
Changes since v5:
Change definition of CTA_FILTER_F_ALL
Fix a regression when CTA_TUPLE_ZONE is not set
Signed-off-by: Romain Bellan <romain.bellan@wifirst.fr>
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Gc step can queue offloaded flow del work or stats work.
Those work items can race each other and a flow could be freed
before the stats work is executed and querying it.
To avoid that, add a pending bit that if a work exists for a flow
don't queue another work for it.
This will also avoid adding multiple stats works in case stats work
didn't complete but gc step started again.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
gcc-10 warns around a suspicious access to an empty struct member:
net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc':
net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds]
1522 | memset(&ct->__nfct_init_offset[0], 0,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from net/netfilter/nf_conntrack_core.c:37:
include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset'
90 | u8 __nfct_init_offset[0];
| ^~~~~~~~~~~~~~~~~~
The code is correct but a bit unusual. Rework it slightly in a way that
does not trigger the warning, using an empty struct instead of an empty
array. There are probably more elegant ways to do this, but this is the
smallest change.
Fixes: c41884ce05 ("netfilter: conntrack: avoid zeroing timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Initialize set lookup matching element to NULL. Otherwise, the
NFT_LOOKUP_F_INV flag reverses the matching logic and it leads to
deference an uninitialized pointer to the matching element. Make sure
element data area and stateful expression are accessed if there is a
matching set element.
This patch undoes 24791b9aa1 ("netfilter: nft_set_bitmap: initialize set
element extension in lookups") which is not required anymore.
Fixes: 339706bc21 ("netfilter: nft_lookup: update element stateful expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add nf_ct_acct_add function to update the conntrack counter
with packets and bytes.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The refcount is done via entry->skb, which does work fine.
Major problem: When putting the refcount of the bridge ports, we
must always put the references while the skb is still around.
However, we will need to put the references after okfn() to avoid
a possible 1 -> 0 -> 1 refcount transition, so we cannot use the
skb pointer anymore.
Place the physports in the queue entry structure instead to allow
for refcounting changes in the next patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a preparation patch, no logical changes.
Move free_entry into core and rename it to something more sensible.
Will ease followup patches which will complicate the refcount handling.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently flow offload threads are synchronized by the flow block mutex.
Use rw lock instead to increase flow insertion (read) concurrency.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch allows users to specify the stateful expression for the
elements in this set via NFTA_SET_EXPR. This new feature allows you to
turn on counters for all of the elements in this set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the AVX2 set is available, we can exploit the repetitive
characteristic of this algorithm to provide a fast, vectorised
version by using 256-bit wide AVX2 operations for bucket loads and
bitwise intersections.
In most cases, this implementation consistently outperforms rbtree
set instances despite the fact they are configured to use a given,
single, ranged data type out of the ones used for performance
measurements by the nft_concat_range.sh kselftest.
That script, injecting packets directly on the ingoing device path
with pktgen, reports, averaged over five runs on a single AMD Epyc
7402 thread (3.35GHz, 768 KiB L1D$, 12 MiB L2$), the figures below.
CONFIG_RETPOLINE was not set here.
Note that this is not a fair comparison over hash and rbtree set
types: non-ranged entries (used to have a reference for hash types)
would be matched faster than this, and matching on a single field
only (which is the case for rbtree) is also significantly faster.
However, it's not possible at the moment to choose this set type
for non-ranged entries, and the current implementation also needs
a few minor adjustments in order to match on less than two fields.
---------------.-----------------------------------.------------.
AMD Epyc 7402 | baselines, Mpps | this patch |
1 thread |___________________________________|____________|
3.35GHz | | | | | |
768KiB L1D$ | netdev | hash | rbtree | | |
---------------| hook | no | single | | pipapo |
type entries | drop | ranges | field | pipapo | AVX2 |
---------------|--------|--------|--------|--------|------------|
net,port | | | | | |
1000 | 19.0 | 10.4 | 3.8 | 4.0 | 7.5 +87% |
---------------|--------|--------|--------|--------|------------|
port,net | | | | | |
100 | 18.8 | 10.3 | 5.8 | 6.3 | 8.1 +29% |
---------------|--------|--------|--------|--------|------------|
net6,port | | | | | |
1000 | 16.4 | 7.6 | 1.8 | 2.1 | 4.8 +128% |
---------------|--------|--------|--------|--------|------------|
port,proto | | | | | |
30000 | 19.6 | 11.6 | 3.9 | 0.5 | 2.6 +420% |
---------------|--------|--------|--------|--------|------------|
net6,port,mac | | | | | |
10 | 16.5 | 5.4 | 4.3 | 3.4 | 4.7 +38% |
---------------|--------|--------|--------|--------|------------|
net6,port,mac, | | | | | |
proto 1000 | 16.5 | 5.7 | 1.9 | 1.4 | 3.6 +26% |
---------------|--------|--------|--------|--------|------------|
net,mac | | | | | |
1000 | 19.0 | 8.4 | 3.9 | 2.5 | 6.4 +156% |
---------------'--------'--------'--------'--------'------------'
A similar strategy could be easily reused to implement specialised
versions for other SIMD sets, and I plan to post at least a NEON
version at a later time.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch support both ipv4 and ipv6 tunnel_id, tunnel_src and
tunnel_dst match for flowtable offload
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller
Pablo Neira Ayuso
Romain Bellan
Paul Blakey
Arnd Bergmann
wenxu
Florian Westphal
Stefano Brivio