Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull device mapper updates from Mike Snitzer:
- The largest change for this cycle is the DM zoned target's metadata
version 2 feature that adds support for pairing regular block devices
with a zoned device to ease the performance impact associated with
finite random zones of zoned device.
The changes came in three batches: the first prepared for and then
added the ability to pair a single regular block device, the second
was a batch of fixes to improve zoned's reclaim heuristic, and the
third removed the limitation of only adding a single additional
regular block device to allow many devices.
Testing has shown linear scaling as more devices are added.
- Add new emulated block size (ebs) target that emulates a smaller
logical_block_size than a block device supports
The primary use-case is to emulate "512e" devices that have 512 byte
logical_block_size and 4KB physical_block_size. This is useful to
some legacy applications that otherwise wouldn't be able to be used
on 4K devices because they depend on issuing IO in 512 byte
granularity.
- Add discard interfaces to DM bufio. First consumer of the interface
is the dm-ebs target that makes heavy use of dm-bufio.
- Fix DM crypt's block queue_limits stacking to not truncate
logic_block_size.
- Add Documentation for DM integrity's status line.
- Switch DMDEBUG from a compile time config option to instead use
dynamic debug via pr_debug.
- Fix DM multipath target's hueristic for how it manages
"queue_if_no_path" state internally.
DM multipath now avoids disabling "queue_if_no_path" unless it is
actually needed (e.g. in response to configure timeout or explicit
"fail_if_no_path" message).
This fixes reports of spurious -EIO being reported back to userspace
application during fault tolerance testing with an NVMe backend.
Added various dynamic DMDEBUG messages to assist with debugging
queue_if_no_path in the future.
- Add a new DM multipath "Historical Service Time" Path Selector.
- Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.
- Improve DM writecache target performance by using explicit cache
flushing for target's single-threaded usecase and a small cleanup to
remove unnecessary test in persistent_memory_claim.
- Other small cleanups in DM core, dm-persistent-data, and DM
integrity.
* tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
dm crypt: avoid truncating the logical block size
dm mpath: add DM device name to Failing/Reinstating path log messages
dm mpath: enhance queue_if_no_path debugging
dm mpath: restrict queue_if_no_path state machine
dm mpath: simplify __must_push_back
dm zoned: check superblock location
dm zoned: prefer full zones for reclaim
dm zoned: select reclaim zone based on device index
dm zoned: allocate zone by device index
dm zoned: support arbitrary number of devices
dm zoned: move random and sequential zones into struct dmz_dev
dm zoned: per-device reclaim
dm zoned: add metadata pointer to struct dmz_dev
dm zoned: add device pointer to struct dm_zone
dm zoned: allocate temporary superblock for tertiary devices
dm zoned: convert to xarray
dm zoned: add a 'reserved' zone flag
dm zoned: improve logging messages for reclaim
dm zoned: avoid unnecessary device recalulation for secondary superblock
dm zoned: add debugging message for reading superblocks
...
queue_limits::logical_block_size got changed from unsigned short to
unsigned int, but it was forgotten to update crypt_io_hints() to use the
new type. Fix it.
Fixes: ad6bf88a6c ("block: fix an integer overflow in logical block size")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When there are many DM multipath devices it really helps to have
additional context for which DM device a failed or reinstated path is
part of.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add more DMDEBUG that shows arguments passed and caller, and another
that shows state of related flags at end of queue_if_no_path().
Also add queue_if_no_path DMDEBUG to multipath_resume().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Do not allow saving disabled queue_if_no_path if already saved as
enabled; implies multiple suspends (which shouldn't ever happen). Log
if this unlikely scenario is ever triggered.
Also, only write MPATHF_SAVED_QUEUE_IF_NO_PATH during presuspend or if
"fail_if_no_path" message. MPATHF_SAVED_QUEUE_IF_NO_PATH is no longer
always modified, e.g.: even if queue_if_no_path()'s save_old_value
argument wasn't set. This just implies a bit tighter control over
the management of MPATHF_SAVED_QUEUE_IF_NO_PATH. Side-effect is
multipath_resume() doesn't reset MPATHF_QUEUE_IF_NO_PATH unless
MPATHF_SAVED_QUEUE_IF_NO_PATH was set (during presuspend); and at that
time the MPATHF_SAVED_QUEUE_IF_NO_PATH bit gets cleared. So
MPATHF_SAVED_QUEUE_IF_NO_PATH's use is much more narrow in scope.
Last, but not least, do _not_ disable queue_if_no_path during noflush
suspend. There is no need/benefit to saving off queue_if_no_path via
MPATHF_SAVED_QUEUE_IF_NO_PATH and clearing MPATHF_QUEUE_IF_NO_PATH for
noflush suspend -- by avoiding this needless queue_if_no_path flag
churn there is less potential for MPATHF_QUEUE_IF_NO_PATH to get lost.
Which avoids potential for IOs to be errored back up to userspace
during DM multipath's handling of path failures.
That said, this last change papers over a reported issue concerning
request-based dm-multipath's interaction with blk-mq, relative to
suspend and resume: multipath_endio is being called _before_
multipath_resume. This should never happen if DM suspend's
blk_mq_quiesce_queue() + dm_wait_for_completion() is genuinely waiting
for all inflight blk-mq requests to complete. Similarly:
drivers/md/dm.c:__dm_resume() clearly calls dm_table_resume_targets()
_before_ dm_start_queue()'s blk_mq_unquiesce_queue() is called. If
the queue isn't even restarted until after multipath_resume(); the BIG
question that still needs answering is: how can multipath_end_io beat
multipath_resume in a race!?
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove micro-optimization that infers device is between presuspend and
resume (was done purely to avoid call to dm_noflush_suspending, which
isn't expensive anyway).
Remove flags argument since they are no longer checked.
And remove must_push_back_bio() since it was simply a call to
__must_push_back().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When specifying several devices the superblock location must be
checked to ensure the devices are specified in the correct order.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Prefer full zones when selecting the next zone for reclaim.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
per-device reclaim should select zones on that device only.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When allocating a zone, pass in an indicator on which device the zone
should be allocated; this increases performance for a multi-device
setup because reclaim will now allocate zones on the device for which
reclaim is running.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove the hard-coded limit of two devices and support an unlimited
number of additional zoned devices.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Random and sequential zones should be part of the respective
device structure to make arbitration between devices possible.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Instead of having one reclaim workqueue for the entire set we should
be allocating a reclaim workqueue per device; doing so will reduce
contention and should boost performance for a multi-device setup.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a metadata pointer within struct dmz_dev and use it as argument
for blkdev_report_zones() instead of the metadata itself.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a pointer, to the containing device, within struct dm_zone and
kill dmz_zone_to_dev().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Checking the tertiary superblock just consists of validating UUIDs,
crcs, and the generation number; it doesn't have contents which would
be required during the actual operation.
So allocate a temporary superblock when checking tertiary devices to
avoid having to store it together with the 'real' superblocks.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The zones array is getting really large, and large arrays tend to
wreak havoc with the CPU caches. So convert it to xarray to become
more cache friendly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix leak in dmz_insert
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Instead of counting the number of reserved zones in dmz_free_zone(),
mark the zone as 'reserved' during allocation and simplify
dmz_free_zone().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Instead of just reporting the errno, add some more verbose debugging
message in the reclaim path.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The secondary superblock must reside on the same device as the primary
superblock, so there is no need to re-calculate the device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use dm_bufio_forget_buffers instead of a block-by-block loop that
calls dm_bufio_forget. dm_bufio_forget_buffers is faster than the loop
because it searches for used buffers using rb-tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce a function forget_buffer_locked that forgets a range of
buffers. It is more efficient than calling forget_buffer in a loop.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-bufio uses unnatural ordering in the rb-tree - blocks with smaller
numbers were put to the right node and blocks with bigger numbers were
put to the left node.
Reverse that logic so that it's natural.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Masahiro Yamada
Linus Torvalds
Eric Biggers
Mike Snitzer
Hannes Reinecke
Mikulas Patocka