Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
This essentially reverts commit c72e3f04b4 ("tools/perf/build:
Speed up git-version test on re-make") and commit 4e666cdb06
("perf tools: Fix dependency for version file creation")
In commit c72e3f04b4 ("tools/perf/build: Speed up git-version test
on re-make"), a makefile dependency on .git/HEAD was added. The
background is that running PERF-VERSION-FILE is relatively slow, and
commands like "git describe" are particularly slow.
In commit 4e666cdb06 ("perf tools: Fix dependency for version file
creation"), an additional dependency on .git/ORIG_HEAD was added, as
.git/HEAD may not change for "git reset --hard HEAD^" command. However,
depending on whether we're on a branch or not, a "git cherry-pick" may
not lead to the version being updated.
As discussed with the git community in [0], using git internal files for
dependencies is not reliable. Commit 4e666cdb06 also breaks some build
scenarios [1].
As mentioned, c72e3f04b4 ("tools/perf/build: Speed up git-version
test on re-make") was added to speed up the build. However in commit
7572733b84 ("perf tools: Fix version kernel tag") we removed the
call to "git describe", so just revert Makefile.perf back to same as pre
c72e3f04b4 ("tools/perf/build: Speed up git-version test on
re-make") and the build should not be so slow, as below:
Pre 7572733b84:
$> time util/PERF-VERSION-GEN
PERF_VERSION = 5.17.rc8.g4e666cdb06ee
real 0m0.110s
user 0m0.091s
sys 0m0.019s
Post 7572733b84:
$> time util/PERF-VERSION-GEN
PERF_VERSION = 5.17.rc8.g7572733b8499
real 0m0.039s
user 0m0.036s
sys 0m0.007s
[0] https://lore.kernel.org/git/87wngkpddp.fsf@igel.home/T/#m4a4dd6de52fdbe21179306cd57b3761eb07f45f8
[1] https://lore.kernel.org/linux-perf-users/20220329093120.4173283-1-matthieu.baerts@tessares.net/T/#u
Committer testing:
After a fresh rebuild using 'make -C tools/perf O=/tmp/build/perf install-bin':
$ perf -v
perf version 5.17.g162f9db407b6
$ git log --oneline -1
162f9db407b6a6e5 (HEAD -> perf/core) perf tools: Stop depending on .git files for building PERF-VERSION-FILE
$
Now using a detached tarball, i.e. outside the kernel source tree:
$ ls -la perf*tar
ls: cannot access 'perf*tar': No such file or directory
$ make perf-tar-src-pkg
TAR
PERF_VERSION = 5.17.g31d10b3ef133
$ ls -la perf*tar
-rw-r--r--. 1 acme acme 22241280 Mar 30 13:26 perf-5.17.0.tar
$ mv perf-5.17.0.tar /tmp
$ cd /tmp
$ tar xf perf-5.17.0.tar
$ cd perf-5.17.0/
$ make -C tools/perf |& tail
CC util/pmu.o
CC util/pmu-flex.o
CC util/expr-flex.o
CC util/expr.o
LD util/scripting-engines/perf-in.o
LD util/intel-pt-decoder/perf-in.o
LD util/perf-in.o
LD perf-in.o
LINK perf
make: Leaving directory '/tmp/perf-5.17.0/tools/perf'
$ tools/perf/perf -v
perf version 5.17.g31d10b3ef133
$ pwd
/tmp/perf-5.17.0
$ cat PERF-VERSION-FILE
#define PERF_VERSION "5.17.g31d10b3ef133"
$
Fixes: 4e666cdb06 ("perf tools: Fix dependency for version file creation")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1648635774-14581-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
991625f3dd ("x86/ibt: Add IBT feature, MSR and #CP handling")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YkSCx2kr4ambH+Qe@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
caa574ffc4 ("drm/i915/uapi: document behaviour for DG2 64K support")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://lore.kernel.org/lkml/YkSChHqaOApscFQ0@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
6d8491910f ("KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2")
ef11c9463a ("KVM: s390: Add vm IOCTL for key checked guest absolute memory access")
e9e9feebcb ("KVM: s390: Add optional storage key checking to MEMOP IOCTL")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/YkSCOWHQdir1lhdJ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
34739fd95f ("KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field")
583cda1b0e ("KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/lkml/YkSB4Q7kWmnaqeZU@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
9457056ac4 ("mm: madvise: MADV_DONTNEED_LOCKED")
That result in these changes in the tools:
$ diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
--- tools/include/uapi/asm-generic/mman-common.h 2022-03-29 16:17:50.461694991 -0300
+++ include/uapi/asm-generic/mman-common.h 2022-03-27 19:12:48.923250468 -0300
@@ -75,6 +75,8 @@
#define MADV_POPULATE_READ 22 /* populate (prefault) page tables readable */
#define MADV_POPULATE_WRITE 23 /* populate (prefault) page tables writable */
+#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2022-03-29 16:18:04.091044244 -0300
+++ after 2022-03-29 16:18:11.692238906 -0300
@@ -20,6 +20,7 @@
[21] = "PAGEOUT",
[22] = "POPULATE_READ",
[23] = "POPULATE_WRITE",
+ [24] = "DONTNEED_LOCKED",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, 'perf trace' will
be able to translate from the number to a human readable string and to
use the strings in tracepoint filter expressions.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkNcUfeh795yqGMV@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
fba60b171a ("libbpf: Use IS_ERR_OR_NULL() in hashmap__free()")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mauricio Vásquez <mauricio@kinvolk.io>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkMb2SAIai2VeuUD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull virtio updates from Michael Tsirkin:
- vdpa generic device type support
- more virtio hardening for broken devices (but on the same theme,
revert some virtio hotplug hardening patches - they were misusing
some interrupt flags and had to be reverted)
- RSS support in virtio-net
- max device MTU support in mlx5 vdpa
- akcipher support in virtio-crypto
- shared IRQ support in ifcvf vdpa
- a minor performance improvement in vhost
- enable virtio mem for ARM64
- beginnings of advance dma support
- cleanups, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
vdpa/mlx5: Avoid processing works if workqueue was destroyed
vhost: handle error while adding split ranges to iotlb
vdpa: support exposing the count of vqs to userspace
vdpa: change the type of nvqs to u32
vdpa: support exposing the config size to userspace
vdpa/mlx5: re-create forwarding rules after mac modified
virtio: pci: check bar values read from virtio config space
Revert "virtio_pci: harden MSI-X interrupts"
Revert "virtio-pci: harden INTX interrupts"
drivers/net/virtio_net: Added RSS hash report control.
drivers/net/virtio_net: Added RSS hash report.
drivers/net/virtio_net: Added basic RSS support.
drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
virtio: use virtio_device_ready() in virtio_device_restore()
tools/virtio: compile with -pthread
tools/virtio: fix after premapped buf support
virtio_ring: remove flags check for unmap packed indirect desc
virtio_ring: remove flags check for unmap split indirect desc
virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
net/mlx5: Add support for configuring max device MTU
...
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
The LLVM make variable allows a developer to quickly switch between the
GNU and LLVM tools. However, it does not handle versioned binaries, such
as the ones shipped by Debian, as LLVM=1 just defines the tool variables
with the unversioned binaries.
There was some discussion during the review of the patch that introduces
LLVM=1 around versioned binaries, ultimately coming to the conclusion
that developers can just add the folder that contains the unversioned
binaries to their PATH, as Debian's versioned suffixed binaries are
really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin:
$ realpath /usr/bin/clang-14
/usr/lib/llvm-14/bin/clang
$ PATH=/usr/lib/llvm-14/bin:$PATH make ... LLVM=1
However, that can be cumbersome to developers who are constantly testing
series with different toolchains and versions. It is simple enough to
support these versioned binaries directly in the Kbuild system by
allowing the developer to specify the version suffix with LLVM=, which
is shorter than the above suggestion:
$ make ... LLVM=-14
It does not change the meaning of LLVM=1 (which will continue to use
unversioned binaries) and it does not add too much additional complexity
to the existing $(LLVM) code, while allowing developers to quickly test
their series with different versions of the whole LLVM suite of tools.
Some developers may build LLVM from source but not add the binaries to
their PATH, as they may not want to use that toolchain systemwide.
Support those developers by allowing them to supply the directory that
the LLVM tools are available in, as it is no more complex to support
than the version suffix change above.
$ make ... LLVM=/path/to/llvm/
Update and reorder the documentation to reflect these new additions.
At the same time, notate that LLVM=0 is not the same as just omitting it
altogether, which has confused people in the past.
Link: https://lore.kernel.org/r/20200317215515.226917-1-ndesaulniers@google.com/
Link: https://lore.kernel.org/r/20220224151322.072632223@infradead.org/
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The seed_rng() function was written to work across lots of old kernels,
back when WireGuard used a big compatibility layer. Now that things have
evolved, we can vastly simplify this, by just marking the RNG as seeded.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
Pull dma-mapping updates from Christoph Hellwig:
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: extract a common header file for map_benchmark definition
dma-debug: fix return value of __setup handlers
dma-mapping: remove CONFIG_DMA_REMAP
media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
sparc: Remove usage of the deprecated "pci-dma-compat.h" API
agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
alpha: Remove usage of the deprecated "pci-dma-compat.h" API
MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
swiotlb: simplify array allocation
swiotlb: tidy up includes
swiotlb: simplify debugfs setup
swiotlb: do not zero buffer in set_memory_decrypted()
llvm upstream patch ([1]) added to issue warning for code like
void test() {
int j = 0;
for (int i = 0; i < 1000; i++)
j++;
return;
}
This triggered several errors in selftests/bpf build since
compilation flag -Werror is used.
...
test_lpm_map.c:212:15: error: variable 'n_matches' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
test_lpm_map.c:212:26: error: variable 'n_matches_after_delete' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
...
prog_tests/get_stack_raw_tp.c:32:15: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
static __u64 cnt;
^
...
For test_lpm_map.c, 'n_matches'/'n_matches_after_delete' are changed to be volatile
in order to silent the warning. I didn't remove these two declarations since
they are referenced in a commented code which might be used by people in certain
cases. For get_stack_raw_tp.c, the variable 'cnt' is removed.
[1] https://reviews.llvm.org/D122271
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220325200304.2915588-1-yhs@fb.com
