Intel IBT requires that every indirect JMP/CALL targets an ENDBR
instructions, failing this #CP happens and we die. Similarly, all
exception entries should be ENDBR.
Find all code relocations and ensure they're either an ENDBR
instruction or ANNOTATE_NOENDBR. For the exceptions look for
UNWIND_HINT_IRET_REGS at sym+0 not being ENDBR.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.705110141@infradead.org
Intel IBT requires the target of any indirect CALL or JMP instruction
to be the ENDBR instruction; optionally it allows those two
instructions to have a NOTRACK prefix in order to avoid this
requirement.
The kernel will not enable the use of NOTRACK, as such any occurence
of it in compiler generated code should be flagged.
Teach objtool to Decode ENDBR instructions and WARN about NOTRACK
prefixes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.645963517@infradead.org
There's a fun implementation detail on linking STB_WEAK symbols. When
the linker combines two translation units, where one contains a weak
function and the other an override for it. It simply strips the
STB_WEAK symbol from the symbol table, but doesn't actually remove the
code.
The result is that when objtool is ran in a whole-archive kind of way,
it will encounter *heaps* of unused (and unreferenced) code. All
rudiments of weak functions.
Additionally, when a weak implementation is split into a .cold
subfunction that .cold symbol is left in place, even though completely
unused.
Teach objtool to ignore such rudiments by searching for symbol holes;
that is, code ranges that fall outside the given symbol bounds.
Specifically, ignore a sequence of unreachable instruction iff they
occupy a single hole, additionally ignore any .cold subfunctions
referenced.
Both ld.bfd and ld.lld behave like this. LTO builds otoh can (and do)
properly DCE weak functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.232019347@infradead.org
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
Teach objtool to turn instrumentation required for memory barrier
modeling into nops in noinstr text.
The __tsan_func_entry/exit calls are still emitted by compilers even
with the __no_sanitize_thread attribute. The memory barrier
instrumentation will be inserted explicitly (without compiler help), and
thus needs to also explicitly be removed.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Teach objtool to validate the straight-line-speculation constraints:
- speculation trap after indirect calls
- speculation trap after RET
Notable: when an instruction is annotated RETPOLINE_SAFE, indicating
speculation isn't a problem, also don't care about sls for that
instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.023037659@infradead.org
Normally objtool will now follow indirect calls; there is no need.
However, this becomes a problem with noinstr validation; if there's an
indirect call from noinstr code, we very much need to know it is to
another noinstr function. Luckily there aren't many indirect calls in
entry code with the obvious exception of paravirt. As such, noinstr
validation didn't work with paravirt kernels.
In order to track pv_ops[] call targets, objtool reads the static
pv_ops[] tables as well as direct assignments to the pv_ops[] array,
provided the compiler makes them a single instruction like:
bf87: 48 c7 05 00 00 00 00 00 00 00 00 movq $0x0,0x0(%rip)
bf92 <xen_init_spinlocks+0x5f>
bf8a: R_X86_64_PC32 pv_ops+0x268
There are, as of yet, no warnings for when this goes wrong :/
Using the functions found with the above means, all pv_ops[] calls are
now subject to noinstr validation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210624095149.118815755@infradead.org
Andi reported that objtool on vmlinux.o consumes more memory than his
system has, leading to horrific performance.
This is in part because we keep a struct instruction for every
instruction in the file in-memory. Shrink struct instruction by
removing the CFI state (which includes full register state) from it
and demand allocating it.
Given most instructions don't actually change CFI state, there's lots
of repetition there, so add a hash table to find previous CFI
instances.
Reduces memory consumption (and runtime) for processing an
x86_64-allyesconfig:
pre: 4:40.84 real, 143.99 user, 44.18 sys, 30624988 mem
post: 2:14.61 real, 108.58 user, 25.04 sys, 16396184 mem
Suggested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210624095147.756759107@infradead.org
Nathan reported that LLVM ThinLTO builds have a performance regression
with commit 25cf0d8aa2 ("objtool: Rewrite hashtable sizing"). Sami
was quick to note that this is due to their use of -ffunction-sections.
As a result the .text section is small and basing the number of relocs
off of that no longer works. Instead have read_sections() compute the
sum of all SHF_EXECINSTR sections and use that.
Fixes: 25cf0d8aa2 ("objtool: Rewrite hashtable sizing")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lkml.kernel.org/r/YMJpGLuGNsGtA5JJ@hirez.programming.kicks-ass.net
Teach objtool about the the low bits in the struct static_key pointer.
That is, the low two bits of @key in:
struct jump_entry {
s32 code;
s32 target;
long key;
}
as found in the __jump_table section. Since @key has a relocation to
the variable (to be resolved by the linker), the low two bits will be
reflected in the relocation's addend.
As such, find the reloc and store the addend, such that we can access
these bits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210506194158.028024143@infradead.org
Currently objtool has 5 hashtables and sizes them 16 or 20 bits
depending on the --vmlinux argument.
However, a single side doesn't really work well for the 5 tables,
which among them, cover 3 different uses. Also, while vmlinux is
larger, there is still a very wide difference between a defconfig and
allyesconfig build, which again isn't optimally covered by a single
size.
Another aspect is the cost of elf_hash_init(), which for large tables
dominates the runtime for small input files. It turns out that all it
does it assign NULL, something that is required when using malloc().
However, when we allocate memory using mmap(), we're guaranteed to get
zero filled pages.
Therefore, rewrite the whole thing to:
1) use more dynamic sized tables, depending on the input file,
2) avoid the need for elf_hash_init() entirely by using mmap().
This speeds up a regular kernel build (100s to 98s for
x86_64-defconfig), and potentially dramatically speeds up vmlinux
processing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210506194157.452881700@infradead.org
Pull objtool updates from Ingo Molnar:
- Standardize the crypto asm code so that it looks like compiler-
generated code to objtool - so that it can understand it. This
enables unwinding from crypto asm code - and also fixes the last
known remaining objtool warnings for LTO and more.
- x86 decoder fixes: clean up and fix the decoder, and also extend it a
bit
- Misc fixes and cleanups
* tag 'objtool-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/crypto: Enable objtool in crypto code
x86/crypto/sha512-ssse3: Standardize stack alignment prologue
x86/crypto/sha512-avx2: Standardize stack alignment prologue
x86/crypto/sha512-avx: Standardize stack alignment prologue
x86/crypto/sha256-avx2: Standardize stack alignment prologue
x86/crypto/sha1_avx2: Standardize stack alignment prologue
x86/crypto/sha_ni: Standardize stack alignment prologue
x86/crypto/crc32c-pcl-intel: Standardize jump table
x86/crypto/camellia-aesni-avx2: Unconditionally allocate stack buffer
x86/crypto/aesni-intel_avx: Standardize stack alignment prologue
x86/crypto/aesni-intel_avx: Fix register usage comments
x86/crypto/aesni-intel_avx: Remove unused macros
objtool: Support asm jump tables
objtool: Parse options from OBJTOOL_ARGS
objtool: Collate parse_options() users
objtool: Add --backup
objtool,x86: More ModRM sugar
objtool,x86: Rewrite ADD/SUB/AND
objtool,x86: Support %riz encodings
objtool,x86: Simplify register decode
...
