It is not quite obvious at first sight what TRACE_EVENT_TEMPLATE
does: does it define an event as well beyond defining a template?
To clarify this, rename it to DECLARE_EVENT_CLASS, which follows
the various 'DECLARE_*()' idioms we already have in the kernel:
DECLARE_EVENT_CLASS(class)
DEFINE_EVENT(class, event1)
DEFINE_EVENT(class, event2)
DEFINE_EVENT(class, event3)
To complete this logic we should also rename TRACE_EVENT() to:
DEFINE_SINGLE_EVENT(single_event)
... but in a more quiet moment of the kernel cycle.
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After creating the TRACE_EVENT_TEMPLATE I started to look at other
trace points to see what duplication was made. I noticed that there
are several trace points where they are almost identical except for
the name and the output format. Since TRACE_EVENT_TEMPLATE was successful
in bringing down the size of trace events, I added a DEFINE_EVENT_PRINT.
DEFINE_EVENT_PRINT is used just like DEFINE_EVENT is. That is, the
DEFINE_EVENT_PRINT also uses a TRACE_EVENT_TEMPLATE, but it allows the
developer to overwrite the print format. If there are two or more
TRACE_EVENTS that are identical except for the name and print, then
they can be converted to use a TRACE_EVENT_TEMPLATE. Since the
TRACE_EVENT_TEMPLATE already does the print output, the first trace event
would have its print format held in the TRACE_EVENT_TEMPLATE and
be defined with a DEFINE_EVENT. The rest will use the DEFINE_EVENT_PRINT
and override the print format.
Converting the sched trace points to both DEFINE_EVENT and
DEFINE_EVENT_PRINT. Five were converted to DEFINE_EVENT and two were
converted to DEFINE_EVENT_PRINT.
I was able to get the following:
$ size kernel/sched.o-*
text data bss dec hex filename
79299 6776 2520 88595 15a13 kernel/sched.o-notrace
101941 11896 2584 116421 1c6c5 kernel/sched.o-templ
104779 11896 2584 119259 1d1db kernel/sched.o-trace
sched.o-notrace is the scheduler compiled with no trace points.
sched.o-templ is with the use of DEFINE_EVENT and DEFINE_EVENT_PRINT
sched.o-trace is the current trace events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are some places in the kernel that define several tracepoints and
they are all identical besides the name. The code to enable, disable and
record is created for every trace point even if most of the code is
identical.
This patch adds TRACE_EVENT_TEMPLATE that lets the developer create
a template TRACE_EVENT and create trace points with DEFINE_EVENT, which
is based off of a given template. Each trace point used by this
will share most of the code, and bring down the size of the kernel
when there are several duplicate events.
Usage is:
TRACE_EVENT_TEMPLATE(name, proto, args, tstruct, assign, print);
Which would be the same as defining a normal TRACE_EVENT.
To create the trace events that the trace points will use:
DEFINE_EVENT(template, name, proto, args) is done. The template
is the name of the TRACE_EVENT_TEMPLATE to use. The name is the
name of the trace point. The parameters proto and args must be the same
as the proto and args of the template. If they are not the same,
then a compile error will result. I tried hard removing this duplication
but the C preprocessor is not powerful enough (or my CPP magic
experience points is not at a high enough level) to not need them.
A lot of trace events are coming in with new XFS development. Most of
the trace points are identical except for the name. The following shows
the advantage of having TRACE_EVENT_TEMPLATE:
$ size fs/xfs/xfs.o.*
text data bss dec hex filename
452114 2788 3520 458422 6feb6 fs/xfs/xfs.o.old
638482 38116 3744 680342 a6196 fs/xfs/xfs.o.template
996954 38116 4480 1039550 fdcbe fs/xfs/xfs.o.trace
xfs.o.old is without any tracepoints.
xfs.o.template uses the new TRACE_EVENT_TEMPLATE.
xfs.o.trace uses the current TRACE_EVENT macros.
Requested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a misplaced ifdef. We need the perf event headers also in
off-case to avoid the following build error:
include/linux/hw_breakpoint.h:94: error: expected declaration specifiers or '...' before 'perf_callback_t'
include/linux/hw_breakpoint.h:102: error: expected declaration specifiers or '...' before 'perf_callback_t'
include/linux/hw_breakpoint.h:109: error: expected declaration specifiers or '...' before 'perf_callback_t'
include/linux/hw_breakpoint.h:116: error: expected declaration specifiers or '...' before 'perf_callback_t'
Reported-by: Kisskb-bot by Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259011812-8093-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make perf_swevent_get_recursion_context return a context number
and disable preemption.
This could be used to remove the IRQ disable from the trace bit
and index the per-cpu buffer with.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091123103819.993226816@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we commit a trace to perf, we first check if we are
recursing in the same buffer so that we don't mess-up the buffer
with a recursing trace. But later on, we do the same check from
perf to avoid commit recursion. The recursion check is desired
early before we touch the buffer but we want to do this check
only once.
Then export the recursion protection from perf and use it from
the trace events before submitting a trace.
v2: Put appropriate Reported-by tag
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/kprobes.c
kernel/trace/Makefile
Merge reason: hw-breakpoints perf integration is looking
good in testing and in reviews, plus conflicts
are mounting up - so merge & resolve.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The purpose of perf_output_{un,}lock() is to:
1) avoid publishing incomplete data
[ possible when publishing a head that is ahead of an entry
that is still being written ]
2) guarantee fwd progress
[ a simple refcount on pending writers doesn't need to drop to
0, making it so would end up implementing something like forced
quiecent states of RCU ]
To satisfy the above without undue complexity it serializes
between CPUs, this means that a pending writer can only be the
same cpu in a nested context, and since (under normal operation)
a cpu always makes progress we're good -- if the head is only
published when the bottom most writer completes.
Now we don't need to disable IRQs in order to serialize between
CPUs, disabling preemption ought to be sufficient, esp since we
already deal with nesting due to NMIs.
This avoids potentially expensive (and needless) local IRQ
disable/enable ops.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258373161.26714.254.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
the arch/alpha build fails with:
In file included from tip/kernel/exit.c:52:
tip/include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr':
tip/include/linux/hw_breakpoint.h:21: error: 'struct perf_event' has no member named 'attr'
[...]
Move these helper inlines inside the CONFIG_HAVE_HW_BREAKPOINT ifdef.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258114575-32655-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove fb_save_state() and fb_restore_state operations from frame buffer layer.
They are used only in two drivers:
1. savagefb - and cause bug #11248
2. uvesafb
Usage of these operations is misunderstood in both drivers so kill these
operations, fix the bug #11248 and avoid confusion in the future.
Tested on Savage 3D/MV card and the patch fixes the bug #11248.
The frame buffer layer uses these funtions during switch between graphics
and text mode of the console, but these drivers saves state before
switching of the frame buffer (in the fb_open) and after releasing it (in
the fb_release). This defeats the purpose of these operations.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11248
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reported-by: Jochen Hein <jochen@jochen.org>
Tested-by: Jochen Hein <jochen@jochen.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We cannot rely on buffer dirty bits during fsync because pdflush can come
before fsync is called and clear dirty bits without forcing a transaction
commit. What we do is that we track which transaction has last changed
the inode and which transaction last changed allocation and force it to
disk on fsync.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This patch rebase the implementation of the breakpoints API on top of
perf events instances.
Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..
The new layering is now made as follows:
ptrace kgdb ftrace perf syscall
\ | / /
\ | / /
/
Core breakpoint API /
/
| /
| /
Breakpoints perf events
|
|
Breakpoints PMU ---- Debug Register constraints handling
(Part of core breakpoint API)
|
|
Hardware debug registers
Reasons of this rewrite:
- Use the centralized/optimized pmu registers scheduling,
implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
events, exclusive/non-exclusive, tunable period, etc...)
Impact:
- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
thread breakpoints references.
Todo (in the order):
- Support breakpoints perf counter events for perf tools (ie: implement
perf_bpcounter_event())
- Support from perf tools
Changes in v2:
- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
perf_event_attr.
- Separate core and arch specific headers, drop
asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch
Changes in v3:
- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
changes to kvm when we exit the guest and restore the bp registers
to the host.
Changes in v4:
- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
module
- Restore the breakpoints unconditionally on kvm guest exit:
TIF_DEBUG_THREAD doesn't anymore cover every cases of running
breakpoints and vcpu->arch.switch_db_regs might not always be
set when the guest used debug registers.
(Waiting for a reliable optimization)
Changes in v5:
- Split-up the asm-generic/hw-breakpoint.h moving to
linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
to host. We only want to restore the state if we have active
breakpoints to the host, otherwise we don't care about messed-up
address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c
Changes in v6:
- Fix wrong header inclusion in trace.h (triggered a build
error with CONFIG_FTRACE_SELFTEST
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
While tracing using events with perf, if one enables the
lockdep:lock_acquire event, it will infect every other perf
trace events.
Basically, you can enable whatever set of trace events through
perf but if this event is part of the set, the only result we
can get is a long list of lock_acquire events of rcu read lock,
and only that.
This is because of a recursion inside perf.
1) When a trace event is triggered, it will fill a per cpu
buffer and submit it to perf.
2) Perf will commit this event but will also protect some data
using rcu_read_lock
3) A recursion appears: rcu_read_lock triggers a lock_acquire
event that will fill the per cpu event and then submit the
buffer to perf.
4) Perf detects a recursion and ignores it
5) Perf continues its work on the previous event, but its buffer
has been overwritten by the lock_acquire event, it has then
been turned into a lock_acquire event of rcu read lock
Such scenario also happens with lock_release with
rcu_read_unlock().
We could turn the rcu_read_lock() into __rcu_read_lock() to drop
the lock debugging from perf fast path, but that would make us
lose the rcu debugging and that doesn't prevent from other
possible kind of recursion from perf in the future.
This patch adds a recursion protection based on a counter on the
perf trace per cpu buffers to solve the problem.
-v2: Fixed lost whitespace, added reviewed-by tag
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1257477185-7838-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some drivers need to be able to prevent access to an I2C bus segment
for a specific period of time. Add an interface for them to do so
without twiddling with i2c-core internals.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
