Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
Pull close_range() cleanup from Christian Brauner:
"This is a cleanup for close_range() which was sent as part of a bugfix
we did some time ago in commit 9b5b872215 ("file: fix close_range()
for unshare+cloexec").
We used to share more code between some helpers for close_range()
which made retrieving the maximum number of open fds before calling
into the helpers sensible. But with the introduction of
CLOSE_RANGE_CLOEXEC and the need to retrieve the number of maximum fds
once more for CLOSE_RANGE_CLOEXEC that stopped making sense. So the
code was in a dumb in-limbo state.
Fix this by simplifying the code a bit.
The original idea was to only fix the bug itself and make backporting
easy. And since the cleanup wasn't very pressing I left it in
linux-next for a very long time. I didn't pull the patches from the
list again back then which is why they don't have lore-links. So I'm
listing them below explicitly"
Commit 03ba0fe4d0 ("file: simplify logic in __close_range()")
Link: https://lore.kernel.org/linux-fsdevel/20210402123548.108372-3-brauner@kernel.org
Commit f49fd6d3c0 ("file: let pick_file() tell caller it's done")
Link: https://lore.kernel.org/linux-fsdevel/20210402123548.108372-4-brauner@kernel.org
* tag 'fs.close_range.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
file: simplify logic in __close_range()
file: let pick_file() tell caller it's done
Pull receive_fd update from Al Viro:
"Cleanup of receive_fd mess"
* 'work.file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: split receive_fd_replace from __receive_fd
receive_fd_replace shares almost no code with the general case, so split
it out. Also remove the "Bump the sock usage counts" comment from
both copies, as that is now what __receive_sock actually does.
[AV: ... and make the only user of receive_fd_replace() choose between
it and receive_fd() according to what userland had passed to it in
flags]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It never looked too pleasant and it doesn't really buy us anything
anymore now that CLOSE_RANGE_CLOEXEC exists and we need to retake the
current maximum under the lock for it anyway. This also makes the logic
easier to follow.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
syzbot reported a bug when putting the last reference to a tasks file
descriptor table. Debugging this showed we didn't recalculate the
current maximum fd number for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC
after we unshared the file descriptors table. So max_fd could exceed the
current fdtable maximum causing us to set excessive bits. As a concrete
example, let's say the user requested everything from fd 4 to ~0UL to be
closed and their current fdtable size is 256 with their highest open fd
being 4. With CLOSE_RANGE_UNSHARE the caller will end up with a new
fdtable which has room for 64 file descriptors since that is the lowest
fdtable size we accept. But now max_fd will still point to 255 and needs
to be adjusted. Fix this by retrieving the correct maximum fd value in
__range_cloexec().
Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com
Fixes: 582f1fb6b7 ("fs, close_range: add flag CLOSE_RANGE_CLOEXEC")
Fixes: fec8a6a691 ("close_range: unshare all fds for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Let pick_file() report back that the fd it was passed exceeded the
maximum fd in that fdtable. This allows us to simplify the caller of
this helper because it doesn't need to care anymore whether the passed
in max_fd is excessive. It can rely on pick_file() telling it that it's
past the last valid fd.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Assumes current->files->file_lock is already held on invocation. Helps
the caller check the file before removing the fd, if it needs to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After introducing CLOSE_RANGE_CLOEXEC syzbot reported a crash when
CLOSE_RANGE_CLOEXEC is specified in conjunction with CLOSE_RANGE_UNSHARE.
When CLOSE_RANGE_UNSHARE is specified the caller will receive a private
file descriptor table in case their file descriptor table is currently
shared.
For the case where the caller has requested all file descriptors to be
actually closed via e.g. close_range(3, ~0U, 0) the kernel knows that
the caller does not need any of the file descriptors anymore and will
optimize the close operation by only copying all files in the range from
0 to 3 and no others.
However, if the caller requested CLOSE_RANGE_CLOEXEC together with
CLOSE_RANGE_UNSHARE the caller wants to still make use of the file
descriptors so the kernel needs to copy all of them and can't optimize.
The original patch didn't account for this and thus could cause oopses
as evidenced by the syzbot report because it assumed that all fds had
been copied. Fix this by handling the CLOSE_RANGE_CLOEXEC case.
syzbot reported
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:71 [inline]
BUG: KASAN: null-ptr-deref in atomic64_read include/asm-generic/atomic-instrumented.h:837 [inline]
BUG: KASAN: null-ptr-deref in atomic_long_read include/asm-generic/atomic-long.h:29 [inline]
BUG: KASAN: null-ptr-deref in filp_close+0x22/0x170 fs/open.c:1274
Read of size 8 at addr 0000000000000077 by task syz-executor511/8522
CPU: 1 PID: 8522 Comm: syz-executor511 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
__kasan_report mm/kasan/report.c:549 [inline]
kasan_report.cold+0x5/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:192
instrument_atomic_read include/linux/instrumented.h:71 [inline]
atomic64_read include/asm-generic/atomic-instrumented.h:837 [inline]
atomic_long_read include/asm-generic/atomic-long.h:29 [inline]
filp_close+0x22/0x170 fs/open.c:1274
close_files fs/file.c:402 [inline]
put_files_struct fs/file.c:417 [inline]
put_files_struct+0x1cc/0x350 fs/file.c:414
exit_files+0x12a/0x170 fs/file.c:435
do_exit+0xb4f/0x2a00 kernel/exit.c:818
do_group_exit+0x125/0x310 kernel/exit.c:920
get_signal+0x428/0x2100 kernel/signal.c:2792
arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
handle_signal_work kernel/entry/common.c:147 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x124/0x200 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x447039
Code: Unable to access opcode bytes at RIP 0x44700f.
RSP: 002b:00007f1b1225cdb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00000000006dbc28 RCX: 0000000000447039
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000006dbc2c
RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c
R13: 00007fff223b6bef R14: 00007f1b1225d9c0 R15: 00000000006dbc2c
==================================================================
syzbot has tested the proposed patch and the reproducer did not trigger any issue:
Reported-and-tested-by: syzbot+96cfd2b22b3213646a93@syzkaller.appspotmail.com
Tested on:
commit: 10f7cddd selftests/core: add regression test for CLOSE_RAN..
git tree: git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git vfs
kernel config: https://syzkaller.appspot.com/x/.config?x=5d42216b510180e3
dashboard link: https://syzkaller.appspot.com/bug?extid=96cfd2b22b3213646a93
compiler: gcc (GCC) 10.1.0-syz 20200507
Reported-by: syzbot+96cfd2b22b3213646a93@syzkaller.appspotmail.com
Fixes: 582f1fb6b7 ("fs, close_range: add flag CLOSE_RANGE_CLOEXEC")
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20201217213303.722643-1-christian.brauner@ubuntu.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pull execve updates from Eric Biederman:
"This set of changes ultimately fixes the interaction of posix file
lock and exec. Fundamentally most of the change is just moving where
unshare_files is called during exec, and tweaking the users of
files_struct so that the count of files_struct is not unnecessarily
played with.
Along the way fcheck and related helpers were renamed to more
accurately reflect what they do.
There were also many other small changes that fell out, as this is the
first time in a long time much of this code has been touched.
Benchmarks haven't turned up any practical issues but Al Viro has
observed a possibility for a lot of pounding on task_lock. So I have
some changes in progress to convert put_files_struct to always rcu
free files_struct. That wasn't ready for the merge window so that will
have to wait until next time"
* 'exec-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
exec: Move io_uring_task_cancel after the point of no return
coredump: Document coredump code exclusively used by cell spufs
file: Remove get_files_struct
file: Rename __close_fd_get_file close_fd_get_file
file: Replace ksys_close with close_fd
file: Rename __close_fd to close_fd and remove the files parameter
file: Merge __alloc_fd into alloc_fd
file: In f_dupfd read RLIMIT_NOFILE once.
file: Merge __fd_install into fd_install
proc/fd: In fdinfo seq_show don't use get_files_struct
bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu
proc/fd: In proc_readfd_common use task_lookup_next_fd_rcu
file: Implement task_lookup_next_fd_rcu
kcmp: In get_file_raw_ptr use task_lookup_fd_rcu
proc/fd: In tid_fd_mode use task_lookup_fd_rcu
file: Implement task_lookup_fd_rcu
file: Rename fcheck lookup_fd_rcu
file: Replace fcheck_files with files_lookup_fd_rcu
file: Factor files_lookup_fd_locked out of fcheck_files
file: Rename __fcheck_files to files_lookup_fd_raw
...
The function close_fd_get_file is explicitly a variant of
__close_fd[1]. Now that __close_fd has been renamed close_fd, rename
close_fd_get_file to be consistent with close_fd.
When __alloc_fd, __close_fd and __fd_install were introduced the
double underscore indicated that the function took a struct
files_struct parameter. The function __close_fd_get_file never has so
the naming has always been inconsistent. This just cleans things up
so there are not any lingering mentions or references __close_fd left
in the code.
[1] 80cd795630 ("binder: fix use-after-free due to ksys_close() during fdget()")
Link: https://lkml.kernel.org/r/20201120231441.29911-23-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The function __close_fd was added to support binder[1]. Now that
binder has been fixed to no longer need __close_fd[2] all calls
to __close_fd pass current->files.
Therefore transform the files parameter into a local variable
initialized to current->files, and rename __close_fd to close_fd to
reflect this change, and keep it in sync with the similar changes to
__alloc_fd, and __fd_install.
This removes the need for callers to care about the extra care that
needs to be take if anything except current->files is passed, by
limiting the callers to only operation on current->files.
[1] 483ce1d4b8 ("take descriptor-related part of close() to file.c")
[2] 44d8047f1d ("binder: use standard functions to allocate fds")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
v1: https://lkml.kernel.org/r/20200817220425.9389-17-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20201120231441.29911-21-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
As a companion to fget_task and task_lookup_fd_rcu implement
task_lookup_next_fd_rcu that will return the struct file for the first
file descriptor number that is equal or greater than the fd argument
value, or NULL if there is no such struct file.
This allows file descriptors of foreign processes to be iterated
through safely, without needed to increment the count on files_struct.
Some concern[1] has been expressed that this function takes the task_lock
for each iteration and thus for each file descriptor. This place
where this function will be called in a commonly used code path is for
listing /proc/<pid>/fd. I did some small benchmarks and did not see
any measurable performance differences. For ordinary users ls is
likely to stat each of the directory entries and tid_fd_mode called
from tid_fd_revalidae has always taken the task lock for each file
descriptor. So this does not look like it will be a big change in
practice.
At some point is will probably be worth changing put_files_struct to
free files_struct after an rcu grace period so that task_lock won't be
needed at all.
[1] https://lkml.kernel.org/r/20200817220425.9389-10-ebiederm@xmission.com
v1: https://lkml.kernel.org/r/20200817220425.9389-9-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20201120231441.29911-14-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This change renames fcheck_files to files_lookup_fd_rcu. All of the
remaining callers take the rcu_read_lock before calling this function
so the _rcu suffix is appropriate. This change also tightens up the
debug check to verify that all callers hold the rcu_read_lock.
All callers that used to call files_check with the files->file_lock
held have now been changed to call files_lookup_fd_locked.
This change of name has helped remind me of which locks and which
guarantees are in place helping me to catch bugs later in the
patchset.
The need for better names became apparent in the last round of
discussion of this set of changes[1].
[1] https://lkml.kernel.org/r/CAHk-=wj8BQbgJFLa+J0e=iT-1qpmCRTbPAJ8gd6MJQ=kbRPqyQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20201120231441.29911-9-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The function fcheck despite it's comment is poorly named
as it has no callers that only check it's return value.
All of fcheck's callers use the returned file descriptor.
The same is true for fcheck_files and __fcheck_files.
A new less confusing name is needed. In addition the names
of these functions are confusing as they do not report
the kind of locks that are needed to be held when these
functions are called making error prone to use them.
To remedy this I am making the base functio name lookup_fd
and will and prefixes and sufficies to indicate the rest
of the context.
Name the function (previously called __fcheck_files) that proceeds
from a struct files_struct, looks up the struct file of a file
descriptor, and requires it's callers to verify all of the appropriate
locks are held files_lookup_fd_raw.
The need for better names became apparent in the last round of
discussion of this set of changes[1].
[1] https://lkml.kernel.org/r/CAHk-=wj8BQbgJFLa+J0e=iT-1qpmCRTbPAJ8gd6MJQ=kbRPqyQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20201120231441.29911-7-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
